cxl: Make vPHB device node match adapter's

On bare-metal, when a device is attached to the cxl card, lsvpd shows
a location code such as (with cxlflash):
     # lsvpd -l sg22
     ...
     *YL U78CB.001.WZS0073-P1-C33-B0-T0-L0
which makes it hard to easily identify the cxl adapter owning the
flash device, since in this example C33 refers to a P8 processor.

lsvpd looks in the parent devices until it finds a location code, so the
device node for the vPHB ends up being used.

By reusing the device node of the adapter for the vPHB, lsvpd shows:
     # lsvpd -l sg16
     ...
     *YL U78C9.001.WZS09XA-P1-C7-B1-T0-L3
where C7 is the PCI slot of the cxl adapter.

On powerVM, the vPHB was already using the adapter device node, so
there's no change there.

Tested by cxlflash on bare-metal and powerVM.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

drivers/misc/cxl/vphb.c

@@ -208,20 +208,19 @@ static struct pci_controller_ops cxl_pci_controller_ops =
 
 int cxl_pci_vphb_add(struct cxl_afu *afu)
 {
-	struct pci_dev *phys_dev;
-	struct pci_controller *phb, *phys_phb;
+	struct pci_controller *phb;
 	struct device_node *vphb_dn;
 	struct device *parent;
 
-	if (cpu_has_feature(CPU_FTR_HVMODE)) {
-		phys_dev = to_pci_dev(afu->adapter->dev.parent);
-		phys_phb = pci_bus_to_host(phys_dev->bus);
-		vphb_dn = phys_phb->dn;
-		parent = &phys_dev->dev;
-	} else {
-		vphb_dn = afu->adapter->dev.parent->of_node;
-		parent = afu->adapter->dev.parent;
-	}
+	/* The parent device is the adapter. Reuse the device node of
+	 * the adapter.
+	 * We don't seem to care what device node is used for the vPHB,
+	 * but tools such as lsvpd walk up the device parents looking
+	 * for a valid location code, so we might as well show devices
+	 * attached to the adapter as being located on that adapter.
+	 */
+	parent = afu->adapter->dev.parent;
+	vphb_dn = parent->of_node;
 
 	/* Alloc and setup PHB data structure */
 	phb = pcibios_alloc_controller(vphb_dn);