Merge remote-tracking branches 'spi/topic/cadence', 'spi/topic/dt', 'spi/topic/ep93xx' and 'spi/topic/falcon' into spi-next

drivers/spi/spi-cadence.c

@@ -576,10 +576,10 @@ static int cdns_spi_probe(struct platform_device *pdev)
 		goto clk_dis_apb;
 	}
 
-	pm_runtime_enable(&pdev->dev);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
 	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
 
 	ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
 	if (ret < 0)
@@ -704,7 +704,9 @@ static int __maybe_unused cdns_spi_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct spi_master *master = platform_get_drvdata(pdev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
 
+	cdns_spi_init_hw(xspi);
 	return spi_master_resume(master);
 }
 

drivers/spi/spi-ep93xx.c

@@ -70,12 +70,9 @@
 
 /**
  * struct ep93xx_spi - EP93xx SPI controller structure
- * @pdev: pointer to platform device
  * @clk: clock for the controller
- * @regs_base: pointer to ioremap()'d registers
+ * @mmio: pointer to ioremap()'d registers
  * @sspdr_phys: physical address of the SSPDR register
- * @wait: wait here until given transfer is completed
- * @current_msg: message that is currently processed (or %NULL if none)
  * @tx: current byte in transfer to transmit
  * @rx: current byte in transfer to receive
  * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one
@@ -90,12 +87,9 @@
  *            the client
  */
 struct ep93xx_spi {
-	const struct platform_device	*pdev;
 	struct clk			*clk;
-	void __iomem			*regs_base;
+	void __iomem			*mmio;
 	unsigned long			sspdr_phys;
-	struct completion		wait;
-	struct spi_message		*current_msg;
 	size_t				tx;
 	size_t				rx;
 	size_t				fifo_level;
@@ -111,91 +105,23 @@ struct ep93xx_spi {
 /* converts bits per word to CR0.DSS value */
 #define bits_per_word_to_dss(bpw)	((bpw) - 1)
 
-static void ep93xx_spi_write_u8(const struct ep93xx_spi *espi,
-				u16 reg, u8 value)
-{
-	writeb(value, espi->regs_base + reg);
-}
-
-static u8 ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg)
-{
-	return readb(spi->regs_base + reg);
-}
-
-static void ep93xx_spi_write_u16(const struct ep93xx_spi *espi,
-				 u16 reg, u16 value)
-{
-	writew(value, espi->regs_base + reg);
-}
-
-static u16 ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg)
-{
-	return readw(spi->regs_base + reg);
-}
-
-static int ep93xx_spi_enable(const struct ep93xx_spi *espi)
-{
-	u8 regval;
-	int err;
-
-	err = clk_enable(espi->clk);
-	if (err)
-		return err;
-
-	regval = ep93xx_spi_read_u8(espi, SSPCR1);
-	regval |= SSPCR1_SSE;
-	ep93xx_spi_write_u8(espi, SSPCR1, regval);
-
-	return 0;
-}
-
-static void ep93xx_spi_disable(const struct ep93xx_spi *espi)
-{
-	u8 regval;
-
-	regval = ep93xx_spi_read_u8(espi, SSPCR1);
-	regval &= ~SSPCR1_SSE;
-	ep93xx_spi_write_u8(espi, SSPCR1, regval);
-
-	clk_disable(espi->clk);
-}
-
-static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi)
-{
-	u8 regval;
-
-	regval = ep93xx_spi_read_u8(espi, SSPCR1);
-	regval |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
-	ep93xx_spi_write_u8(espi, SSPCR1, regval);
-}
-
-static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi)
-{
-	u8 regval;
-
-	regval = ep93xx_spi_read_u8(espi, SSPCR1);
-	regval &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
-	ep93xx_spi_write_u8(espi, SSPCR1, regval);
-}
-
 /**
  * ep93xx_spi_calc_divisors() - calculates SPI clock divisors
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
  * @rate: desired SPI output clock rate
  * @div_cpsr: pointer to return the cpsr (pre-scaler) divider
  * @div_scr: pointer to return the scr divider
  */
-static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
+static int ep93xx_spi_calc_divisors(struct spi_master *master,
 				    u32 rate, u8 *div_cpsr, u8 *div_scr)
 {
-	struct spi_master *master = platform_get_drvdata(espi->pdev);
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
 	unsigned long spi_clk_rate = clk_get_rate(espi->clk);
 	int cpsr, scr;
 
 	/*
 	 * Make sure that max value is between values supported by the
-	 * controller. Note that minimum value is already checked in
-	 * ep93xx_spi_transfer_one_message().
+	 * controller.
 	 */
 	rate = clamp(rate, master->min_speed_hz, master->max_speed_hz);
 
@@ -220,26 +146,18 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
 	return -EINVAL;
 }
 
-static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable)
-{
-	if (spi->mode & SPI_CS_HIGH)
-		enable = !enable;
-
-	if (gpio_is_valid(spi->cs_gpio))
-		gpio_set_value(spi->cs_gpio, !enable);
-}
-
-static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
+static int ep93xx_spi_chip_setup(struct spi_master *master,
 				 struct spi_device *spi,
 				 struct spi_transfer *xfer)
 {
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
 	u8 dss = bits_per_word_to_dss(xfer->bits_per_word);
 	u8 div_cpsr = 0;
 	u8 div_scr = 0;
 	u16 cr0;
 	int err;
 
-	err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz,
+	err = ep93xx_spi_calc_divisors(master, xfer->speed_hz,
 				       &div_cpsr, &div_scr);
 	if (err)
 		return err;
@@ -248,51 +166,49 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
 	cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
 	cr0 |= dss;
 
-	dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
+	dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
 		spi->mode, div_cpsr, div_scr, dss);
-	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
+	dev_dbg(&master->dev, "setup: cr0 %#x\n", cr0);
 
-	ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
-	ep93xx_spi_write_u16(espi, SSPCR0, cr0);
+	writel(div_cpsr, espi->mmio + SSPCPSR);
+	writel(cr0, espi->mmio + SSPCR0);
 
 	return 0;
 }
 
-static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)
+static void ep93xx_do_write(struct spi_master *master)
 {
-	if (t->bits_per_word > 8) {
-		u16 tx_val = 0;
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	struct spi_transfer *xfer = master->cur_msg->state;
+	u32 val = 0;
 
-		if (t->tx_buf)
-			tx_val = ((u16 *)t->tx_buf)[espi->tx];
-		ep93xx_spi_write_u16(espi, SSPDR, tx_val);
-		espi->tx += sizeof(tx_val);
+	if (xfer->bits_per_word > 8) {
+		if (xfer->tx_buf)
+			val = ((u16 *)xfer->tx_buf)[espi->tx];
+		espi->tx += 2;
 	} else {
-		u8 tx_val = 0;
-
-		if (t->tx_buf)
-			tx_val = ((u8 *)t->tx_buf)[espi->tx];
-		ep93xx_spi_write_u8(espi, SSPDR, tx_val);
-		espi->tx += sizeof(tx_val);
+		if (xfer->tx_buf)
+			val = ((u8 *)xfer->tx_buf)[espi->tx];
+		espi->tx += 1;
 	}
+	writel(val, espi->mmio + SSPDR);
 }
 
-static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
+static void ep93xx_do_read(struct spi_master *master)
 {
-	if (t->bits_per_word > 8) {
-		u16 rx_val;
-
-		rx_val = ep93xx_spi_read_u16(espi, SSPDR);
-		if (t->rx_buf)
-			((u16 *)t->rx_buf)[espi->rx] = rx_val;
-		espi->rx += sizeof(rx_val);
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	struct spi_transfer *xfer = master->cur_msg->state;
+	u32 val;
+
+	val = readl(espi->mmio + SSPDR);
+	if (xfer->bits_per_word > 8) {
+		if (xfer->rx_buf)
+			((u16 *)xfer->rx_buf)[espi->rx] = val;
+		espi->rx += 2;
 	} else {
-		u8 rx_val;
-
-		rx_val = ep93xx_spi_read_u8(espi, SSPDR);
-		if (t->rx_buf)
-			((u8 *)t->rx_buf)[espi->rx] = rx_val;
-		espi->rx += sizeof(rx_val);
+		if (xfer->rx_buf)
+			((u8 *)xfer->rx_buf)[espi->rx] = val;
+		espi->rx += 1;
 	}
 }
 
@@ -307,44 +223,32 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
  * When this function is finished, RX FIFO should be empty and TX FIFO should be
  * full.
  */
-static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
+static int ep93xx_spi_read_write(struct spi_master *master)
 {
-	struct spi_message *msg = espi->current_msg;
-	struct spi_transfer *t = msg->state;
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	struct spi_transfer *xfer = master->cur_msg->state;
 
 	/* read as long as RX FIFO has frames in it */
-	while ((ep93xx_spi_read_u8(espi, SSPSR) & SSPSR_RNE)) {
-		ep93xx_do_read(espi, t);
+	while ((readl(espi->mmio + SSPSR) & SSPSR_RNE)) {
+		ep93xx_do_read(master);
 		espi->fifo_level--;
 	}
 
 	/* write as long as TX FIFO has room */
-	while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < t->len) {
-		ep93xx_do_write(espi, t);
+	while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < xfer->len) {
+		ep93xx_do_write(master);
 		espi->fifo_level++;
 	}
 
-	if (espi->rx == t->len)
+	if (espi->rx == xfer->len)
 		return 0;
 
 	return -EINPROGRESS;
 }
 
-static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
-{
-	/*
-	 * Now everything is set up for the current transfer. We prime the TX
-	 * FIFO, enable interrupts, and wait for the transfer to complete.
-	 */
-	if (ep93xx_spi_read_write(espi)) {
-		ep93xx_spi_enable_interrupts(espi);
-		wait_for_completion(&espi->wait);
-	}
-}
-
 /**
  * ep93xx_spi_dma_prepare() - prepares a DMA transfer
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
  * @dir: DMA transfer direction
  *
  * Function configures the DMA, maps the buffer and prepares the DMA
@@ -352,9 +256,11 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
  * in case of failure.
  */
 static struct dma_async_tx_descriptor *
-ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
+ep93xx_spi_dma_prepare(struct spi_master *master,
+		       enum dma_transfer_direction dir)
 {
-	struct spi_transfer *t = espi->current_msg->state;
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	struct spi_transfer *xfer = master->cur_msg->state;
 	struct dma_async_tx_descriptor *txd;
 	enum dma_slave_buswidth buswidth;
 	struct dma_slave_config conf;
@@ -362,10 +268,10 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 	struct sg_table *sgt;
 	struct dma_chan *chan;
 	const void *buf, *pbuf;
-	size_t len = t->len;
+	size_t len = xfer->len;
 	int i, ret, nents;
 
-	if (t->bits_per_word > 8)
+	if (xfer->bits_per_word > 8)
 		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
 	else
 		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -375,14 +281,14 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 
 	if (dir == DMA_DEV_TO_MEM) {
 		chan = espi->dma_rx;
-		buf = t->rx_buf;
+		buf = xfer->rx_buf;
 		sgt = &espi->rx_sgt;
 
 		conf.src_addr = espi->sspdr_phys;
 		conf.src_addr_width = buswidth;
 	} else {
 		chan = espi->dma_tx;
-		buf = t->tx_buf;
+		buf = xfer->tx_buf;
 		sgt = &espi->tx_sgt;
 
 		conf.dst_addr = espi->sspdr_phys;
@@ -429,7 +335,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 	}
 
 	if (WARN_ON(len)) {
-		dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len);
+		dev_warn(&master->dev, "len = %zu expected 0!\n", len);
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -447,15 +353,16 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 
 /**
  * ep93xx_spi_dma_finish() - finishes with a DMA transfer
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
  * @dir: DMA transfer direction
  *
  * Function finishes with the DMA transfer. After this, the DMA buffer is
  * unmapped.
  */
-static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
+static void ep93xx_spi_dma_finish(struct spi_master *master,
 				  enum dma_transfer_direction dir)
 {
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
 	struct dma_chan *chan;
 	struct sg_table *sgt;
 
@@ -472,72 +379,107 @@ static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
 
 static void ep93xx_spi_dma_callback(void *callback_param)
 {
-	complete(callback_param);
+	struct spi_master *master = callback_param;
+
+	ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV);
+	ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+
+	spi_finalize_current_transfer(master);
 }
 
-static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
+static int ep93xx_spi_dma_transfer(struct spi_master *master)
 {
-	struct spi_message *msg = espi->current_msg;
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
 	struct dma_async_tx_descriptor *rxd, *txd;
 
-	rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM);
+	rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM);
 	if (IS_ERR(rxd)) {
-		dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
-		msg->status = PTR_ERR(rxd);
-		return;
+		dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
+		return PTR_ERR(rxd);
 	}
 
-	txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV);
+	txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV);
 	if (IS_ERR(txd)) {
-		ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
-		dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
-		msg->status = PTR_ERR(txd);
-		return;
+		ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+		dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
+		return PTR_ERR(txd);
 	}
 
 	/* We are ready when RX is done */
 	rxd->callback = ep93xx_spi_dma_callback;
-	rxd->callback_param = &espi->wait;
+	rxd->callback_param = master;
 
-	/* Now submit both descriptors and wait while they finish */
+	/* Now submit both descriptors and start DMA */
 	dmaengine_submit(rxd);
 	dmaengine_submit(txd);
 
 	dma_async_issue_pending(espi->dma_rx);
 	dma_async_issue_pending(espi->dma_tx);
 
-	wait_for_completion(&espi->wait);
-
-	ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV);
-	ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
+	/* signal that we need to wait for completion */
+	return 1;
 }
 
-/**
- * ep93xx_spi_process_transfer() - processes one SPI transfer
- * @espi: ep93xx SPI controller struct
- * @msg: current message
- * @t: transfer to process
- *
- * This function processes one SPI transfer given in @t. Function waits until
- * transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was successfully processed or not.
- */
-static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
-					struct spi_message *msg,
-					struct spi_transfer *t)
+static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
 {
-	int err;
+	struct spi_master *master = dev_id;
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	u32 val;
+
+	/*
+	 * If we got ROR (receive overrun) interrupt we know that something is
+	 * wrong. Just abort the message.
+	 */
+	if (readl(espi->mmio + SSPIIR) & SSPIIR_RORIS) {
+		/* clear the overrun interrupt */
+		writel(0, espi->mmio + SSPICR);
+		dev_warn(&master->dev,
+			 "receive overrun, aborting the message\n");
+		master->cur_msg->status = -EIO;
+	} else {
+		/*
+		 * Interrupt is either RX (RIS) or TX (TIS). For both cases we
+		 * simply execute next data transfer.
+		 */
+		if (ep93xx_spi_read_write(master)) {
+			/*
+			 * In normal case, there still is some processing left
+			 * for current transfer. Let's wait for the next
+			 * interrupt then.
+			 */
+			return IRQ_HANDLED;
+		}
+	}
 
-	msg->state = t;
+	/*
+	 * Current transfer is finished, either with error or with success. In
+	 * any case we disable interrupts and notify the worker to handle
+	 * any post-processing of the message.
+	 */
+	val = readl(espi->mmio + SSPCR1);
+	val &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
+	writel(val, espi->mmio + SSPCR1);
+
+	spi_finalize_current_transfer(master);
+
+	return IRQ_HANDLED;
+}
 
-	err = ep93xx_spi_chip_setup(espi, msg->spi, t);
-	if (err) {
-		dev_err(&espi->pdev->dev,
-			"failed to setup chip for transfer\n");
-		msg->status = err;
-		return;
+static int ep93xx_spi_transfer_one(struct spi_master *master,
+				   struct spi_device *spi,
+				   struct spi_transfer *xfer)
+{
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	u32 val;
+	int ret;
+
+	ret = ep93xx_spi_chip_setup(master, spi, xfer);
+	if (ret) {
+		dev_err(&master->dev, "failed to setup chip for transfer\n");
+		return ret;
 	}
 
+	master->cur_msg->state = xfer;
 	espi->rx = 0;
 	espi->tx = 0;
 
@@ -546,83 +488,37 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
 	 * fit into the FIFO and can be transferred with a single interrupt.
 	 * So in these cases we will be using PIO and don't bother for DMA.
 	 */
-	if (espi->dma_rx && t->len > SPI_FIFO_SIZE)
-		ep93xx_spi_dma_transfer(espi);
-	else
-		ep93xx_spi_pio_transfer(espi);
+	if (espi->dma_rx && xfer->len > SPI_FIFO_SIZE)
+		return ep93xx_spi_dma_transfer(master);
 
-	/*
-	 * In case of error during transmit, we bail out from processing
-	 * the message.
-	 */
-	if (msg->status)
-		return;
+	/* Using PIO so prime the TX FIFO and enable interrupts */
+	ep93xx_spi_read_write(master);
 
-	msg->actual_length += t->len;
+	val = readl(espi->mmio + SSPCR1);
+	val |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
+	writel(val, espi->mmio + SSPCR1);
 
-	/*
-	 * After this transfer is finished, perform any possible
-	 * post-transfer actions requested by the protocol driver.
-	 */
-	if (t->delay_usecs) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(usecs_to_jiffies(t->delay_usecs));
-	}
-	if (t->cs_change) {
-		if (!list_is_last(&t->transfer_list, &msg->transfers)) {
-			/*
-			 * In case protocol driver is asking us to drop the
-			 * chipselect briefly, we let the scheduler to handle
-			 * any "delay" here.
-			 */
-			ep93xx_spi_cs_control(msg->spi, false);
-			cond_resched();
-			ep93xx_spi_cs_control(msg->spi, true);
-		}
-	}
+	/* signal that we need to wait for completion */
+	return 1;
 }
 
-/*
- * ep93xx_spi_process_message() - process one SPI message
- * @espi: ep93xx SPI controller struct
- * @msg: message to process
- *
- * This function processes a single SPI message. We go through all transfers in
- * the message and pass them to ep93xx_spi_process_transfer(). Chipselect is
- * asserted during the whole message (unless per transfer cs_change is set).
- *
- * @msg->status contains %0 in case of success or negative error code in case of
- * failure.
- */
-static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
-				       struct spi_message *msg)
+static int ep93xx_spi_prepare_message(struct spi_master *master,
+				      struct spi_message *msg)
 {
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
 	unsigned long timeout;
-	struct spi_transfer *t;
-	int err;
-
-	/*
-	 * Enable the SPI controller and its clock.
-	 */
-	err = ep93xx_spi_enable(espi);
-	if (err) {
-		dev_err(&espi->pdev->dev, "failed to enable SPI controller\n");
-		msg->status = err;
-		return;
-	}
 
 	/*
 	 * Just to be sure: flush any data from RX FIFO.
 	 */
 	timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT);
-	while (ep93xx_spi_read_u16(espi, SSPSR) & SSPSR_RNE) {
+	while (readl(espi->mmio + SSPSR) & SSPSR_RNE) {
 		if (time_after(jiffies, timeout)) {
-			dev_warn(&espi->pdev->dev,
+			dev_warn(&master->dev,
 				 "timeout while flushing RX FIFO\n");
-			msg->status = -ETIMEDOUT;
-			return;
+			return -ETIMEDOUT;
 		}
-		ep93xx_spi_read_u16(espi, SSPDR);
+		readl(espi->mmio + SSPDR);
 	}
 
 	/*
@@ -631,81 +527,38 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
 	 */
 	espi->fifo_level = 0;
 
-	/*
-	 * Assert the chipselect.
-	 */
-	ep93xx_spi_cs_control(msg->spi, true);
-
-	list_for_each_entry(t, &msg->transfers, transfer_list) {
-		ep93xx_spi_process_transfer(espi, msg, t);
-		if (msg->status)
-			break;
-	}
-
-	/*
-	 * Now the whole message is transferred (or failed for some reason). We
-	 * deselect the device and disable the SPI controller.
-	 */
-	ep93xx_spi_cs_control(msg->spi, false);
-	ep93xx_spi_disable(espi);
+	return 0;
 }
 
-static int ep93xx_spi_transfer_one_message(struct spi_master *master,
-					   struct spi_message *msg)
+static int ep93xx_spi_prepare_hardware(struct spi_master *master)
 {
 	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	u32 val;
+	int ret;
 
-	msg->state = NULL;
-	msg->status = 0;
-	msg->actual_length = 0;
-
-	espi->current_msg = msg;
-	ep93xx_spi_process_message(espi, msg);
-	espi->current_msg = NULL;
+	ret = clk_enable(espi->clk);
+	if (ret)
+		return ret;
 
-	spi_finalize_current_message(master);
+	val = readl(espi->mmio + SSPCR1);
+	val |= SSPCR1_SSE;
+	writel(val, espi->mmio + SSPCR1);
 
 	return 0;
 }
 
-static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
+static int ep93xx_spi_unprepare_hardware(struct spi_master *master)
 {
-	struct ep93xx_spi *espi = dev_id;
-	u8 irq_status = ep93xx_spi_read_u8(espi, SSPIIR);
+	struct ep93xx_spi *espi = spi_master_get_devdata(master);
+	u32 val;
 
-	/*
-	 * If we got ROR (receive overrun) interrupt we know that something is
-	 * wrong. Just abort the message.
-	 */
-	if (unlikely(irq_status & SSPIIR_RORIS)) {
-		/* clear the overrun interrupt */
-		ep93xx_spi_write_u8(espi, SSPICR, 0);
-		dev_warn(&espi->pdev->dev,
-			 "receive overrun, aborting the message\n");
-		espi->current_msg->status = -EIO;
-	} else {
-		/*
-		 * Interrupt is either RX (RIS) or TX (TIS). For both cases we
-		 * simply execute next data transfer.
-		 */
-		if (ep93xx_spi_read_write(espi)) {
-			/*
-			 * In normal case, there still is some processing left
-			 * for current transfer. Let's wait for the next
-			 * interrupt then.
-			 */
-			return IRQ_HANDLED;
-		}
-	}
+	val = readl(espi->mmio + SSPCR1);
+	val &= ~SSPCR1_SSE;
+	writel(val, espi->mmio + SSPCR1);
 
-	/*
-	 * Current transfer is finished, either with error or with success. In
-	 * any case we disable interrupts and notify the worker to handle
-	 * any post-processing of the message.
-	 */
-	ep93xx_spi_disable_interrupts(espi);
-	complete(&espi->wait);
-	return IRQ_HANDLED;
+	clk_disable(espi->clk);
+
+	return 0;
 }
 
 static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param)
@@ -809,7 +662,10 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
-	master->transfer_one_message = ep93xx_spi_transfer_one_message;
+	master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware;
+	master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware;
+	master->prepare_message = ep93xx_spi_prepare_message;
+	master->transfer_one = ep93xx_spi_transfer_one;
 	master->bus_num = pdev->id;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
@@ -850,26 +706,23 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 		goto fail_release_master;
 	}
 
-	init_completion(&espi->wait);
-
 	/*
 	 * Calculate maximum and minimum supported clock rates
 	 * for the controller.
 	 */
 	master->max_speed_hz = clk_get_rate(espi->clk) / 2;
 	master->min_speed_hz = clk_get_rate(espi->clk) / (254 * 256);
-	espi->pdev = pdev;
 
 	espi->sspdr_phys = res->start + SSPDR;
 
-	espi->regs_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(espi->regs_base)) {
-		error = PTR_ERR(espi->regs_base);
+	espi->mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(espi->mmio)) {
+		error = PTR_ERR(espi->mmio);
 		goto fail_release_master;
 	}
 
 	error = devm_request_irq(&pdev->dev, irq, ep93xx_spi_interrupt,
-				0, "ep93xx-spi", espi);
+				0, "ep93xx-spi", master);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request irq\n");
 		goto fail_release_master;
@@ -879,7 +732,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n");
 
 	/* make sure that the hardware is disabled */
-	ep93xx_spi_write_u8(espi, SSPCR1, 0);
+	writel(0, espi->mmio + SSPCR1);
 
 	error = devm_spi_register_master(&pdev->dev, master);
 	if (error) {

drivers/spi/spi-falcon.c

@@ -395,11 +395,6 @@ static int falcon_sflash_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	int ret;
 
-	if (ltq_boot_select() != BS_SPI) {
-		dev_err(&pdev->dev, "invalid bootstrap options\n");
-		return -ENODEV;
-	}
-
 	master = spi_alloc_master(&pdev->dev, sizeof(*priv));
 	if (!master)
 		return -ENOMEM;

drivers/spi/spi-orion.c

@@ -669,8 +669,8 @@ static int orion_spi_probe(struct platform_device *pdev)
 		status = of_property_read_u32(np, "reg", &cs);
 		if (status) {
 			dev_err(&pdev->dev,
-				"%s has no valid 'reg' property (%d)\n",
-				np->full_name, status);
+				"%pOF has no valid 'reg' property (%d)\n",
+				np, status);
 			status = 0;
 			continue;
 		}

drivers/spi/spi.c

@@ -1587,8 +1587,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 
 	if (spi_controller_is_slave(ctlr)) {
 		if (strcmp(nc->name, "slave")) {
-			dev_err(&ctlr->dev, "%s is not called 'slave'\n",
-				nc->full_name);
+			dev_err(&ctlr->dev, "%pOF is not called 'slave'\n",
+				nc);
 			return -EINVAL;
 		}
 		return 0;
@@ -1597,8 +1597,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 	/* Device address */
 	rc = of_property_read_u32(nc, "reg", &value);
 	if (rc) {
-		dev_err(&ctlr->dev, "%s has no valid 'reg' property (%d)\n",
-			nc->full_name, rc);
+		dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
+			nc, rc);
 		return rc;
 	}
 	spi->chip_select = value;
@@ -1607,8 +1607,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 	rc = of_property_read_u32(nc, "spi-max-frequency", &value);
 	if (rc) {
 		dev_err(&ctlr->dev,
-			"%s has no valid 'spi-max-frequency' property (%d)\n",
-			nc->full_name, rc);
+			"%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc);
 		return rc;
 	}
 	spi->max_speed_hz = value;
@@ -1625,8 +1624,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
 	/* Alloc an spi_device */
 	spi = spi_alloc_device(ctlr);
 	if (!spi) {
-		dev_err(&ctlr->dev, "spi_device alloc error for %s\n",
-			nc->full_name);
+		dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc);
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -1635,8 +1633,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
 	rc = of_modalias_node(nc, spi->modalias,
 				sizeof(spi->modalias));
 	if (rc < 0) {
-		dev_err(&ctlr->dev, "cannot find modalias for %s\n",
-			nc->full_name);
+		dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
 		goto err_out;
 	}
 
@@ -1651,8 +1648,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
 	/* Register the new device */
 	rc = spi_add_device(spi);
 	if (rc) {
-		dev_err(&ctlr->dev, "spi_device register error %s\n",
-			nc->full_name);
+		dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc);
 		goto err_of_node_put;
 	}
 
@@ -1686,8 +1682,7 @@ static void of_register_spi_devices(struct spi_controller *ctlr)
 		spi = of_register_spi_device(ctlr, nc);
 		if (IS_ERR(spi)) {
 			dev_warn(&ctlr->dev,
-				 "Failed to create SPI device for %s\n",
-				 nc->full_name);
+				 "Failed to create SPI device for %pOF\n", nc);
 			of_node_clear_flag(nc, OF_POPULATED);
 		}
 	}
@@ -3346,8 +3341,8 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action,
 		put_device(&ctlr->dev);
 
 		if (IS_ERR(spi)) {
-			pr_err("%s: failed to create for '%s'\n",
-					__func__, rd->dn->full_name);
+			pr_err("%s: failed to create for '%pOF'\n",
+					__func__, rd->dn);
 			of_node_clear_flag(rd->dn, OF_POPULATED);
 			return notifier_from_errno(PTR_ERR(spi));
 		}