Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:

 - a few block updates that fell in my lap

 - lib/ updates

 - checkpatch

 - autofs

 - ipc

 - a ton of misc other things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
  mm: split gfp_mask and mapping flags into separate fields
  fs: use mapping_set_error instead of opencoded set_bit
  treewide: remove redundant #include <linux/kconfig.h>
  hung_task: allow hung_task_panic when hung_task_warnings is 0
  kthread: add kerneldoc for kthread_create()
  kthread: better support freezable kthread workers
  kthread: allow to modify delayed kthread work
  kthread: allow to cancel kthread work
  kthread: initial support for delayed kthread work
  kthread: detect when a kthread work is used by more workers
  kthread: add kthread_destroy_worker()
  kthread: add kthread_create_worker*()
  kthread: allow to call __kthread_create_on_node() with va_list args
  kthread/smpboot: do not park in kthread_create_on_cpu()
  kthread: kthread worker API cleanup
  kthread: rename probe_kthread_data() to kthread_probe_data()
  scripts/tags.sh: enable code completion in VIM
  mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping
  kdump, vmcoreinfo: report memory sections virtual addresses
  ipc/sem.c: add cond_resched in exit_sme
  ...

Documentation/DMA-attributes.txt

@@ -126,3 +126,20 @@ means that we won't try quite as hard to get them.
 
 NOTE: At the moment DMA_ATTR_ALLOC_SINGLE_PAGES is only implemented on ARM,
 though ARM64 patches will likely be posted soon.
+
+DMA_ATTR_NO_WARN
+----------------
+
+This tells the DMA-mapping subsystem to suppress allocation failure reports
+(similarly to __GFP_NOWARN).
+
+On some architectures allocation failures are reported with error messages
+to the system logs.  Although this can help to identify and debug problems,
+drivers which handle failures (eg, retry later) have no problems with them,
+and can actually flood the system logs with error messages that aren't any
+problem at all, depending on the implementation of the retry mechanism.
+
+So, this provides a way for drivers to avoid those error messages on calls
+where allocation failures are not a problem, and shouldn't bother the logs.
+
+NOTE: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.

Documentation/RCU/lockdep-splat.txt

@@ -57,7 +57,7 @@ Call Trace:
  [<ffffffff817db154>] kernel_thread_helper+0x4/0x10
  [<ffffffff81066430>] ? finish_task_switch+0x80/0x110
  [<ffffffff817d9c04>] ? retint_restore_args+0xe/0xe
- [<ffffffff81097510>] ? __init_kthread_worker+0x70/0x70
+ [<ffffffff81097510>] ? __kthread_init_worker+0x70/0x70
  [<ffffffff817db150>] ? gs_change+0xb/0xb
 
 Line 2776 of block/cfq-iosched.c in v3.0-rc5 is as follows:

Documentation/dev-tools/kmemleak.rst

@@ -162,6 +162,15 @@ See the include/linux/kmemleak.h header for the functions prototype.
 - ``kmemleak_alloc_recursive`` - as kmemleak_alloc but checks the recursiveness
 - ``kmemleak_free_recursive``	 - as kmemleak_free but checks the recursiveness
 
+The following functions take a physical address as the object pointer
+and only perform the corresponding action if the address has a lowmem
+mapping:
+
+- ``kmemleak_alloc_phys``
+- ``kmemleak_free_part_phys``
+- ``kmemleak_not_leak_phys``
+- ``kmemleak_ignore_phys``
+
 Dealing with false positives/negatives
 --------------------------------------
 

Documentation/filesystems/autofs4-mount-control.txt

@@ -179,8 +179,19 @@ struct autofs_dev_ioctl {
 				 * including this struct */
 	__s32 ioctlfd;          /* automount command fd */
 
-	__u32 arg1;             /* Command parameters */
-	__u32 arg2;
+	union {
+		struct args_protover		protover;
+		struct args_protosubver		protosubver;
+		struct args_openmount		openmount;
+		struct args_ready		ready;
+		struct args_fail		fail;
+		struct args_setpipefd		setpipefd;
+		struct args_timeout		timeout;
+		struct args_requester		requester;
+		struct args_expire		expire;
+		struct args_askumount		askumount;
+		struct args_ismountpoint	ismountpoint;
+	};
 
 	char path[0];
 };
@@ -192,8 +203,8 @@ optionally be used to check a specific mount corresponding to a given
 mount point file descriptor, and when requesting the uid and gid of the
 last successful mount on a directory within the autofs file system.
 
-The fields arg1 and arg2 are used to communicate parameters and results of
-calls made as described below.
+The union is used to communicate parameters and results of calls made
+as described below.
 
 The path field is used to pass a path where it is needed and the size field
 is used account for the increased structure length when translating the
@@ -245,9 +256,9 @@ AUTOFS_DEV_IOCTL_PROTOVER_CMD and AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD
 Get the major and minor version of the autofs4 protocol version understood
 by loaded module. This call requires an initialized struct autofs_dev_ioctl
 with the ioctlfd field set to a valid autofs mount point descriptor
-and sets the requested version number in structure field arg1. These
-commands return 0 on success or one of the negative error codes if
-validation fails.
+and sets the requested version number in version field of struct args_protover
+or sub_version field of struct args_protosubver. These commands return
+0 on success or one of the negative error codes if validation fails.
 
 
 AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT
@@ -256,9 +267,9 @@ AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT
 Obtain and release a file descriptor for an autofs managed mount point
 path. The open call requires an initialized struct autofs_dev_ioctl with
 the path field set and the size field adjusted appropriately as well
-as the arg1 field set to the device number of the autofs mount. The
-device number can be obtained from the mount options shown in
-/proc/mounts. The close call requires an initialized struct
+as the devid field of struct args_openmount set to the device number of
+the autofs mount. The device number can be obtained from the mount options
+shown in /proc/mounts. The close call requires an initialized struct
 autofs_dev_ioct with the ioctlfd field set to the descriptor obtained
 from the open call. The release of the file descriptor can also be done
 with close(2) so any open descriptors will also be closed at process exit.
@@ -272,10 +283,10 @@ AUTOFS_DEV_IOCTL_READY_CMD and AUTOFS_DEV_IOCTL_FAIL_CMD
 Return mount and expire result status from user space to the kernel.
 Both of these calls require an initialized struct autofs_dev_ioctl
 with the ioctlfd field set to the descriptor obtained from the open
-call and the arg1 field set to the wait queue token number, received
-by user space in the foregoing mount or expire request. The arg2 field
-is set to the status to be returned. For the ready call this is always
-0 and for the fail call it is set to the errno of the operation.
+call and the token field of struct args_ready or struct args_fail set
+to the wait queue token number, received by user space in the foregoing
+mount or expire request. The status field of struct args_fail is set to
+the errno of the operation. It is set to 0 on success.
 
 
 AUTOFS_DEV_IOCTL_SETPIPEFD_CMD
@@ -290,9 +301,10 @@ mount be catatonic (see next call).
 
 The call requires an initialized struct autofs_dev_ioctl with the
 ioctlfd field set to the descriptor obtained from the open call and
-the arg1 field set to descriptor of the pipe. On success the call
-also sets the process group id used to identify the controlling process
-(eg. the owning automount(8) daemon) to the process group of the caller.
+the pipefd field of struct args_setpipefd set to descriptor of the pipe.
+On success the call also sets the process group id used to identify the
+controlling process (eg. the owning automount(8) daemon) to the process
+group of the caller.
 
 
 AUTOFS_DEV_IOCTL_CATATONIC_CMD
@@ -323,9 +335,8 @@ mount on the given path dentry.
 
 The call requires an initialized struct autofs_dev_ioctl with the path
 field set to the mount point in question and the size field adjusted
-appropriately as well as the arg1 field set to the device number of the
-containing autofs mount. Upon return the struct field arg1 contains the
-uid and arg2 the gid.
+appropriately. Upon return the uid field of struct args_requester contains
+the uid and gid field the gid.
 
 When reconstructing an autofs mount tree with active mounts we need to
 re-connect to mounts that may have used the original process uid and
@@ -343,8 +354,9 @@ this ioctl is called until no further expire candidates are found.
 The call requires an initialized struct autofs_dev_ioctl with the
 ioctlfd field set to the descriptor obtained from the open call. In
 addition an immediate expire, independent of the mount timeout, can be
-requested by setting the arg1 field to 1. If no expire candidates can
-be found the ioctl returns -1 with errno set to EAGAIN.
+requested by setting the how field of struct args_expire to 1. If no
+expire candidates can be found the ioctl returns -1 with errno set to
+EAGAIN.
 
 This call causes the kernel module to check the mount corresponding
 to the given ioctlfd for mounts that can be expired, issues an expire
@@ -357,7 +369,8 @@ Checks if an autofs mount point is in use.
 
 The call requires an initialized struct autofs_dev_ioctl with the
 ioctlfd field set to the descriptor obtained from the open call and
-it returns the result in the arg1 field, 1 for busy and 0 otherwise.
+it returns the result in the may_umount field of struct args_askumount,
+1 for busy and 0 otherwise.
 
 
 AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD
@@ -369,12 +382,12 @@ The call requires an initialized struct autofs_dev_ioctl. There are two
 possible variations. Both use the path field set to the path of the mount
 point to check and the size field adjusted appropriately. One uses the
 ioctlfd field to identify a specific mount point to check while the other
-variation uses the path and optionally arg1 set to an autofs mount type.
-The call returns 1 if this is a mount point and sets arg1 to the device
-number of the mount and field arg2 to the relevant super block magic
-number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
-in field arg1.
+variation uses the path and optionally in.type field of struct args_ismountpoint
+set to an autofs mount type. The call returns 1 if this is a mount point
+and sets out.devid field to the device number of the mount and out.magic
+field to the relevant super block magic number (described below) or 0 if
+it isn't a mountpoint. In both cases the the device number (as returned
+by new_encode_dev()) is returned in out.devid field.
 
 If supplied with a file descriptor we're looking for a specific mount,
 not necessarily at the top of the mounted stack. In this case the path

Documentation/filesystems/autofs4.txt

@@ -203,9 +203,9 @@ initiated or is being considered, otherwise it returns 0.
 Mountpoint expiry
 -----------------
 
-The VFS has a mechansim for automatically expiring unused mounts,
+The VFS has a mechanism for automatically expiring unused mounts,
 much as it can expire any unused dentry information from the dcache.
-This is guided by the MNT_SHRINKABLE flag.  This  only applies to
+This is guided by the MNT_SHRINKABLE flag.  This only applies to
 mounts that were created by `d_automount()` returning a filesystem to be
 mounted.  As autofs doesn't return such a filesystem but leaves the
 mounting to the automount daemon, it must involve the automount daemon
@@ -298,7 +298,7 @@ remove directories and symlinks using normal filesystem operations.
 autofs knows whether a process requesting some operation is the daemon
 or not based on its process-group id number (see getpgid(1)).
 
-When an autofs filesystem it mounted the pgid of the mounting
+When an autofs filesystem is mounted the pgid of the mounting
 processes is recorded unless the "pgrp=" option is given, in which
 case that number is recorded instead.  Any request arriving from a
 process in that process group is considered to come from the daemon.
@@ -450,7 +450,7 @@ Commands are:
     numbers for existing filesystems can be found in
     `/proc/self/mountinfo`.
 - **AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD**: same as `close(ioctlfd)`.
-- **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**: if the  filesystem is in
+- **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**: if the filesystem is in
     catatonic mode, this can provide the write end of a new pipe
     in `arg1` to re-establish communication with a daemon.  The
     process group of the calling process is used to identify the

Documentation/kernel-parameters.txt

@@ -33,6 +33,37 @@ can also be entered as
 Double-quotes can be used to protect spaces in values, e.g.:
 	param="spaces in here"
 
+cpu lists:
+----------
+
+Some kernel parameters take a list of CPUs as a value, e.g.  isolcpus,
+nohz_full, irqaffinity, rcu_nocbs.  The format of this list is:
+
+	<cpu number>,...,<cpu number>
+
+or
+
+	<cpu number>-<cpu number>
+	(must be a positive range in ascending order)
+
+or a mixture
+
+<cpu number>,...,<cpu number>-<cpu number>
+
+Note that for the special case of a range one can split the range into equal
+sized groups and for each group use some amount from the beginning of that
+group:
+
+	<cpu number>-cpu number>:<used size>/<group size>
+
+For example one can add to the command line following parameter:
+
+	isolcpus=1,2,10-20,100-2000:2/25
+
+where the final item represents CPUs 100,101,125,126,150,151,...
+
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -1789,13 +1820,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
 	irqaffinity=	[SMP] Set the default irq affinity mask
-			Format:
-			<cpu number>,...,<cpu number>
-			or
-			<cpu number>-<cpu number>
-			(must be a positive range in ascending order)
-			or a mixture
-			<cpu number>,...,<cpu number>-<cpu number>
+			The argument is a cpu list, as described above.
 
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
@@ -1812,13 +1837,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
 	isolcpus=	[KNL,SMP] Isolate CPUs from the general scheduler.
-			Format:
-			<cpu number>,...,<cpu number>
-			or
-			<cpu number>-<cpu number>
-			(must be a positive range in ascending order)
-			or a mixture
-			<cpu number>,...,<cpu number>-<cpu number>
+			The argument is a cpu list, as described above.
 
 			This option can be used to specify one or more CPUs
 			to isolate from the general SMP balancing and scheduling
@@ -2680,6 +2699,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Default: on
 
 	nohz_full=	[KNL,BOOT]
+			The argument is a cpu list, as described above.
 			In kernels built with CONFIG_NO_HZ_FULL=y, set
 			the specified list of CPUs whose tick will be stopped
 			whenever possible. The boot CPU will be forced outside
@@ -3285,6 +3305,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			See Documentation/blockdev/ramdisk.txt.
 
 	rcu_nocbs=	[KNL]
+			The argument is a cpu list, as described above.
+
 			In kernels built with CONFIG_RCU_NOCB_CPU=y, set
 			the specified list of CPUs to be no-callback CPUs.
 			Invocation of these CPUs' RCU callbacks will

arch/arm/include/asm/trusted_foundations.h

@@ -26,7 +26,6 @@
 #ifndef __ASM_ARM_TRUSTED_FOUNDATIONS_H
 #define __ASM_ARM_TRUSTED_FOUNDATIONS_H
 
-#include <linux/kconfig.h>
 #include <linux/printk.h>
 #include <linux/bug.h>
 #include <linux/of.h>

arch/arm/kernel/process.c

@@ -318,8 +318,7 @@ unsigned long get_wchan(struct task_struct *p)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }
 
 #ifdef CONFIG_MMU

arch/arm64/include/asm/alternative.h

@@ -7,7 +7,6 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/init.h>
-#include <linux/kconfig.h>
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/stringify.h>

arch/arm64/kernel/process.c

@@ -372,12 +372,8 @@ unsigned long arch_align_stack(unsigned long sp)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk;
-
 	if (is_compat_task())
-		range_end += 0x02000000;
+		return randomize_page(mm->brk, 0x02000000);
 	else
-		range_end += 0x40000000;
-
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+		return randomize_page(mm->brk, 0x40000000);
 }

arch/mips/cavium-octeon/setup.c

@@ -267,6 +267,17 @@ static void octeon_crash_shutdown(struct pt_regs *regs)
 	default_machine_crash_shutdown(regs);
 }
 
+#ifdef CONFIG_SMP
+void octeon_crash_smp_send_stop(void)
+{
+	int cpu;
+
+	/* disable watchdogs */
+	for_each_online_cpu(cpu)
+		cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0);
+}
+#endif
+
 #endif /* CONFIG_KEXEC */
 
 #ifdef CONFIG_CAVIUM_RESERVE32
@@ -911,6 +922,9 @@ void __init prom_init(void)
 	_machine_kexec_shutdown = octeon_shutdown;
 	_machine_crash_shutdown = octeon_crash_shutdown;
 	_machine_kexec_prepare = octeon_kexec_prepare;
+#ifdef CONFIG_SMP
+	_crash_smp_send_stop = octeon_crash_smp_send_stop;
+#endif
 #endif
 
 	octeon_user_io_init();

arch/mips/include/asm/kexec.h

@@ -45,6 +45,7 @@ extern const unsigned char kexec_smp_wait[];
 extern unsigned long secondary_kexec_args[4];
 extern void (*relocated_kexec_smp_wait) (void *);
 extern atomic_t kexec_ready_to_reboot;
+extern void (*_crash_smp_send_stop)(void);
 #endif
 #endif
 

arch/mips/include/asm/mach-loongson64/loongson.h

@@ -14,7 +14,6 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/kconfig.h>
 #include <boot_param.h>
 
 /* loongson internal northbridge initialization */

arch/mips/kernel/crash.c

@@ -47,9 +47,14 @@ static void crash_shutdown_secondary(void *passed_regs)
 
 static void crash_kexec_prepare_cpus(void)
 {
+	static int cpus_stopped;
 	unsigned int msecs;
+	unsigned int ncpus;
 
-	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+	if (cpus_stopped)
+		return;
+
+	ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
 
 	dump_send_ipi(crash_shutdown_secondary);
 	smp_wmb();
@@ -64,6 +69,17 @@ static void crash_kexec_prepare_cpus(void)
 		cpu_relax();
 		mdelay(1);
 	}
+
+	cpus_stopped = 1;
+}
+
+/* Override the weak function in kernel/panic.c */
+void crash_smp_send_stop(void)
+{
+	if (_crash_smp_send_stop)
+		_crash_smp_send_stop();
+
+	crash_kexec_prepare_cpus();
 }
 
 #else /* !defined(CONFIG_SMP)  */

arch/mips/kernel/machine_kexec.c

@@ -25,6 +25,7 @@ void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
 #ifdef CONFIG_SMP
 void (*relocated_kexec_smp_wait) (void *);
 atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+void (*_crash_smp_send_stop)(void) = NULL;
 #endif
 
 int

arch/mips/math-emu/cp1emu.c

@@ -35,7 +35,6 @@
  */
 #include <linux/sched.h>
 #include <linux/debugfs.h>
-#include <linux/kconfig.h>
 #include <linux/percpu-defs.h>
 #include <linux/perf_event.h>
 

arch/mips/net/bpf_jit.c

@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
-#include <linux/kconfig.h>
 #include <linux/moduleloader.h>
 #include <linux/netdevice.h>
 #include <linux/string.h>

arch/powerpc/kernel/iommu.c

@@ -479,7 +479,8 @@ int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 
 		/* Handle failure */
 		if (unlikely(entry == DMA_ERROR_CODE)) {
-			if (printk_ratelimit())
+			if (!(attrs & DMA_ATTR_NO_WARN) &&
+			    printk_ratelimit())
 				dev_info(dev, "iommu_alloc failed, tbl %p "
 					 "vaddr %lx npages %lu\n", tbl, vaddr,
 					 npages);
@@ -776,7 +777,8 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
 					 mask >> tbl->it_page_shift, align,
 					 attrs);
 		if (dma_handle == DMA_ERROR_CODE) {
-			if (printk_ratelimit())  {
+			if (!(attrs & DMA_ATTR_NO_WARN) &&
+			    printk_ratelimit())  {
 				dev_info(dev, "iommu_alloc failed, tbl %p "
 					 "vaddr %p npages %d\n", tbl, vaddr,
 					 npages);

arch/tile/mm/mmap.c

@@ -88,6 +88,5 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }

arch/unicore32/kernel/process.c

@@ -295,8 +295,7 @@ unsigned long get_wchan(struct task_struct *p)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }
 
 /*

arch/x86/include/asm/kexec.h

@@ -210,6 +210,7 @@ struct kexec_entry64_regs {
 
 typedef void crash_vmclear_fn(void);
 extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss;
+extern void kdump_nmi_shootdown_cpus(void);
 
 #endif /* __ASSEMBLY__ */
 

arch/x86/include/asm/smp.h

@@ -47,6 +47,7 @@ struct smp_ops {
 	void (*smp_cpus_done)(unsigned max_cpus);
 
 	void (*stop_other_cpus)(int wait);
+	void (*crash_stop_other_cpus)(void);
 	void (*smp_send_reschedule)(int cpu);
 
 	int (*cpu_up)(unsigned cpu, struct task_struct *tidle);

arch/x86/kernel/crash.c

@@ -133,15 +133,31 @@ static void kdump_nmi_callback(int cpu, struct pt_regs *regs)
 	disable_local_APIC();
 }
 
-static void kdump_nmi_shootdown_cpus(void)
+void kdump_nmi_shootdown_cpus(void)
 {
 	nmi_shootdown_cpus(kdump_nmi_callback);
 
 	disable_local_APIC();
 }
 
+/* Override the weak function in kernel/panic.c */
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+
+	if (cpus_stopped)
+		return;
+
+	if (smp_ops.crash_stop_other_cpus)
+		smp_ops.crash_stop_other_cpus();
+	else
+		smp_send_stop();
+
+	cpus_stopped = 1;
+}
+
 #else
-static void kdump_nmi_shootdown_cpus(void)
+void crash_smp_send_stop(void)
 {
 	/* There are no cpus to shootdown */
 }
@@ -160,7 +176,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 	/* The kernel is broken so disable interrupts */
 	local_irq_disable();
 
-	kdump_nmi_shootdown_cpus();
+	crash_smp_send_stop();
 
 	/*
 	 * VMCLEAR VMCSs loaded on this cpu if needed.

arch/x86/kernel/machine_kexec_64.c

@@ -337,6 +337,9 @@ void arch_crash_save_vmcoreinfo(void)
 #endif
 	vmcoreinfo_append_str("KERNELOFFSET=%lx\n",
 			      kaslr_offset());
+	VMCOREINFO_PAGE_OFFSET(PAGE_OFFSET);
+	VMCOREINFO_VMALLOC_START(VMALLOC_START);
+	VMCOREINFO_VMEMMAP_START(VMEMMAP_START);
 }
 
 /* arch-dependent functionality related to kexec file-based syscall */

arch/x86/kernel/process.c

@@ -509,8 +509,7 @@ unsigned long arch_align_stack(unsigned long sp)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }
 
 /*

arch/x86/kernel/smp.c

@@ -32,6 +32,8 @@
 #include <asm/nmi.h>
 #include <asm/mce.h>
 #include <asm/trace/irq_vectors.h>
+#include <asm/kexec.h>
+
 /*
  *	Some notes on x86 processor bugs affecting SMP operation:
  *
@@ -342,6 +344,9 @@ struct smp_ops smp_ops = {
 	.smp_cpus_done		= native_smp_cpus_done,
 
 	.stop_other_cpus	= native_stop_other_cpus,
+#if defined(CONFIG_KEXEC_CORE)
+	.crash_stop_other_cpus	= kdump_nmi_shootdown_cpus,
+#endif
 	.smp_send_reschedule	= native_smp_send_reschedule,
 
 	.cpu_up			= native_cpu_up,

arch/x86/kernel/sys_x86_64.c

@@ -101,7 +101,6 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 			   unsigned long *end)
 {
 	if (!test_thread_flag(TIF_ADDR32) && (flags & MAP_32BIT)) {
-		unsigned long new_begin;
 		/* This is usually used needed to map code in small
 		   model, so it needs to be in the first 31bit. Limit
 		   it to that.  This means we need to move the
@@ -112,9 +111,7 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 		*begin = 0x40000000;
 		*end = 0x80000000;
 		if (current->flags & PF_RANDOMIZE) {
-			new_begin = randomize_range(*begin, *begin + 0x02000000, 0);
-			if (new_begin)
-				*begin = new_begin;
+			*begin = randomize_page(*begin, 0x02000000);
 		}
 	} else {
 		*begin = current->mm->mmap_legacy_base;

arch/x86/kvm/i8254.c

@@ -212,7 +212,7 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 	 */
 	smp_mb();
 	if (atomic_dec_if_positive(&ps->pending) > 0)
-		queue_kthread_work(&pit->worker, &pit->expired);
+		kthread_queue_work(&pit->worker, &pit->expired);
 }
 
 void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
@@ -233,7 +233,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 static void destroy_pit_timer(struct kvm_pit *pit)
 {
 	hrtimer_cancel(&pit->pit_state.timer);
-	flush_kthread_work(&pit->expired);
+	kthread_flush_work(&pit->expired);
 }
 
 static void pit_do_work(struct kthread_work *work)
@@ -272,7 +272,7 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 	if (atomic_read(&ps->reinject))
 		atomic_inc(&ps->pending);
 
-	queue_kthread_work(&pt->worker, &pt->expired);
+	kthread_queue_work(&pt->worker, &pt->expired);
 
 	if (ps->is_periodic) {
 		hrtimer_add_expires_ns(&ps->timer, ps->period);
@@ -324,7 +324,7 @@ static void create_pit_timer(struct kvm_pit *pit, u32 val, int is_period)
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&ps->timer);
-	flush_kthread_work(&pit->expired);
+	kthread_flush_work(&pit->expired);
 	ps->period = interval;
 	ps->is_periodic = is_period;
 
@@ -667,13 +667,13 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	pid_nr = pid_vnr(pid);
 	put_pid(pid);
 
-	init_kthread_worker(&pit->worker);
+	kthread_init_worker(&pit->worker);
 	pit->worker_task = kthread_run(kthread_worker_fn, &pit->worker,
 				       "kvm-pit/%d", pid_nr);
 	if (IS_ERR(pit->worker_task))
 		goto fail_kthread;
 
-	init_kthread_work(&pit->expired, pit_do_work);
+	kthread_init_work(&pit->expired, pit_do_work);
 
 	pit->kvm = kvm;
 
@@ -730,7 +730,7 @@ void kvm_free_pit(struct kvm *kvm)
 		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->speaker_dev);
 		kvm_pit_set_reinject(pit, false);
 		hrtimer_cancel(&pit->pit_state.timer);
-		flush_kthread_work(&pit->expired);
+		kthread_flush_work(&pit->expired);
 		kthread_stop(pit->worker_task);
 		kvm_free_irq_source_id(kvm, pit->irq_source_id);
 		kfree(pit);

block/blk-lib.c

@@ -31,6 +31,7 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 	unsigned int granularity;
 	enum req_op op;
 	int alignment;
+	sector_t bs_mask;
 
 	if (!q)
 		return -ENXIO;
@@ -50,6 +51,10 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 		op = REQ_OP_DISCARD;
 	}
 
+	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
+	if ((sector | nr_sects) & bs_mask)
+		return -EINVAL;
+
 	/* Zero-sector (unknown) and one-sector granularities are the same.  */
 	granularity = max(q->limits.discard_granularity >> 9, 1U);
 	alignment = (bdev_discard_alignment(bdev) >> 9) % granularity;
@@ -150,10 +155,15 @@ int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
 	unsigned int max_write_same_sectors;
 	struct bio *bio = NULL;
 	int ret = 0;
+	sector_t bs_mask;
 
 	if (!q)
 		return -ENXIO;
 
+	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
+	if ((sector | nr_sects) & bs_mask)
+		return -EINVAL;
+
 	/* Ensure that max_write_same_sectors doesn't overflow bi_size */
 	max_write_same_sectors = UINT_MAX >> 9;
 
@@ -202,6 +212,11 @@ static int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
 	int ret;
 	struct bio *bio = NULL;
 	unsigned int sz;
+	sector_t bs_mask;
+
+	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
+	if ((sector | nr_sects) & bs_mask)
+		return -EINVAL;
 
 	while (nr_sects != 0) {
 		bio = next_bio(bio, min(nr_sects, (sector_t)BIO_MAX_PAGES),

block/ioctl.c

@@ -225,7 +225,8 @@ static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
 		unsigned long arg)
 {
 	uint64_t range[2];
-	uint64_t start, len;
+	struct address_space *mapping;
+	uint64_t start, end, len;
 
 	if (!(mode & FMODE_WRITE))
 		return -EBADF;
@@ -235,18 +236,23 @@ static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
 
 	start = range[0];
 	len = range[1];
+	end = start + len - 1;
 
 	if (start & 511)
 		return -EINVAL;
 	if (len & 511)
 		return -EINVAL;
-	start >>= 9;
-	len >>= 9;
-
-	if (start + len > (i_size_read(bdev->bd_inode) >> 9))
+	if (end >= (uint64_t)i_size_read(bdev->bd_inode))
+		return -EINVAL;
+	if (end < start)
 		return -EINVAL;
 
-	return blkdev_issue_zeroout(bdev, start, len, GFP_KERNEL, false);
+	/* Invalidate the page cache, including dirty pages */
+	mapping = bdev->bd_inode->i_mapping;
+	truncate_inode_pages_range(mapping, start, end);
+
+	return blkdev_issue_zeroout(bdev, start >> 9, len >> 9, GFP_KERNEL,
+				    false);
 }
 
 static int put_ushort(unsigned long arg, unsigned short val)

crypto/crypto_engine.c

@@ -47,7 +47,7 @@ static void crypto_pump_requests(struct crypto_engine *engine,
 
 	/* If another context is idling then defer */
 	if (engine->idling) {
-		queue_kthread_work(&engine->kworker, &engine->pump_requests);
+		kthread_queue_work(&engine->kworker, &engine->pump_requests);
 		goto out;
 	}
 
@@ -58,7 +58,7 @@ static void crypto_pump_requests(struct crypto_engine *engine,
 
 		/* Only do teardown in the thread */
 		if (!in_kthread) {
-			queue_kthread_work(&engine->kworker,
+			kthread_queue_work(&engine->kworker,
 					   &engine->pump_requests);
 			goto out;
 		}
@@ -189,7 +189,7 @@ int crypto_transfer_cipher_request(struct crypto_engine *engine,
 	ret = ablkcipher_enqueue_request(&engine->queue, req);
 
 	if (!engine->busy && need_pump)
-		queue_kthread_work(&engine->kworker, &engine->pump_requests);
+		kthread_queue_work(&engine->kworker, &engine->pump_requests);
 
 	spin_unlock_irqrestore(&engine->queue_lock, flags);
 	return ret;
@@ -231,7 +231,7 @@ int crypto_transfer_hash_request(struct crypto_engine *engine,
 	ret = ahash_enqueue_request(&engine->queue, req);
 
 	if (!engine->busy && need_pump)
-		queue_kthread_work(&engine->kworker, &engine->pump_requests);
+		kthread_queue_work(&engine->kworker, &engine->pump_requests);
 
 	spin_unlock_irqrestore(&engine->queue_lock, flags);
 	return ret;
@@ -284,7 +284,7 @@ void crypto_finalize_cipher_request(struct crypto_engine *engine,
 
 	req->base.complete(&req->base, err);
 
-	queue_kthread_work(&engine->kworker, &engine->pump_requests);
+	kthread_queue_work(&engine->kworker, &engine->pump_requests);
 }
 EXPORT_SYMBOL_GPL(crypto_finalize_cipher_request);
 
@@ -321,7 +321,7 @@ void crypto_finalize_hash_request(struct crypto_engine *engine,
 
 	req->base.complete(&req->base, err);
 
-	queue_kthread_work(&engine->kworker, &engine->pump_requests);
+	kthread_queue_work(&engine->kworker, &engine->pump_requests);
 }
 EXPORT_SYMBOL_GPL(crypto_finalize_hash_request);
 
@@ -345,7 +345,7 @@ int crypto_engine_start(struct crypto_engine *engine)
 	engine->running = true;
 	spin_unlock_irqrestore(&engine->queue_lock, flags);
 
-	queue_kthread_work(&engine->kworker, &engine->pump_requests);
+	kthread_queue_work(&engine->kworker, &engine->pump_requests);
 
 	return 0;
 }
@@ -422,7 +422,7 @@ struct crypto_engine *crypto_engine_alloc_init(struct device *dev, bool rt)
 	crypto_init_queue(&engine->queue, CRYPTO_ENGINE_MAX_QLEN);
 	spin_lock_init(&engine->queue_lock);
 
-	init_kthread_worker(&engine->kworker);
+	kthread_init_worker(&engine->kworker);
 	engine->kworker_task = kthread_run(kthread_worker_fn,
 					   &engine->kworker, "%s",
 					   engine->name);
@@ -430,7 +430,7 @@ struct crypto_engine *crypto_engine_alloc_init(struct device *dev, bool rt)
 		dev_err(dev, "failed to create crypto request pump task\n");
 		return NULL;
 	}
-	init_kthread_work(&engine->pump_requests, crypto_pump_work);
+	kthread_init_work(&engine->pump_requests, crypto_pump_work);
 
 	if (engine->rt) {
 		dev_info(dev, "will run requests pump with realtime priority\n");
@@ -455,7 +455,7 @@ int crypto_engine_exit(struct crypto_engine *engine)
 	if (ret)
 		return ret;
 
-	flush_kthread_worker(&engine->kworker);
+	kthread_flush_worker(&engine->kworker);
 	kthread_stop(engine->kworker_task);
 
 	return 0;

drivers/block/loop.c

@@ -840,13 +840,13 @@ static void loop_config_discard(struct loop_device *lo)
 
 static void loop_unprepare_queue(struct loop_device *lo)
 {
-	flush_kthread_worker(&lo->worker);
+	kthread_flush_worker(&lo->worker);
 	kthread_stop(lo->worker_task);
 }
 
 static int loop_prepare_queue(struct loop_device *lo)
 {
-	init_kthread_worker(&lo->worker);
+	kthread_init_worker(&lo->worker);
 	lo->worker_task = kthread_run(kthread_worker_fn,
 			&lo->worker, "loop%d", lo->lo_number);
 	if (IS_ERR(lo->worker_task))
@@ -1658,7 +1658,7 @@ static int loop_queue_rq(struct blk_mq_hw_ctx *hctx,
 		break;
 	}
 
-	queue_kthread_work(&lo->worker, &cmd->work);
+	kthread_queue_work(&lo->worker, &cmd->work);
 
 	return BLK_MQ_RQ_QUEUE_OK;
 }
@@ -1696,7 +1696,7 @@ static int loop_init_request(void *data, struct request *rq,
 	struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
 
 	cmd->rq = rq;
-	init_kthread_work(&cmd->work, loop_queue_work);
+	kthread_init_work(&cmd->work, loop_queue_work);
 
 	return 0;
 }

drivers/char/random.c

@@ -2100,23 +2100,37 @@ unsigned long get_random_long(void)
 }
 EXPORT_SYMBOL(get_random_long);
 
-/*
- * randomize_range() returns a start address such that
+/**
+ * randomize_page - Generate a random, page aligned address
+ * @start:	The smallest acceptable address the caller will take.
+ * @range:	The size of the area, starting at @start, within which the
+ *		random address must fall.
+ *
+ * If @start + @range would overflow, @range is capped.
  *
- *    [...... <range> .....]
- *  start                  end
+ * NOTE: Historical use of randomize_range, which this replaces, presumed that
+ * @start was already page aligned.  We now align it regardless.
  *
- * a <range> with size "len" starting at the return value is inside in the
- * area defined by [start, end], but is otherwise randomized.
+ * Return: A page aligned address within [start, start + range).  On error,
+ * @start is returned.
  */
 unsigned long
-randomize_range(unsigned long start, unsigned long end, unsigned long len)
+randomize_page(unsigned long start, unsigned long range)
 {
-	unsigned long range = end - len - start;
+	if (!PAGE_ALIGNED(start)) {
+		range -= PAGE_ALIGN(start) - start;
+		start = PAGE_ALIGN(start);
+	}
 
-	if (end <= start + len)
-		return 0;
-	return PAGE_ALIGN(get_random_int() % range + start);
+	if (start > ULONG_MAX - range)
+		range = ULONG_MAX - start;
+
+	range >>= PAGE_SHIFT;
+
+	if (range == 0)
+		return start;
+
+	return start + (get_random_long() % range << PAGE_SHIFT);
 }
 
 /* Interface for in-kernel drivers of true hardware RNGs.

drivers/char/virtio_console.c

@@ -38,7 +38,6 @@
 #include <linux/workqueue.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
-#include <linux/kconfig.h>
 #include "../tty/hvc/hvc_console.h"
 
 #define is_rproc_enabled IS_ENABLED(CONFIG_REMOTEPROC)

drivers/infiniband/sw/rdmavt/cq.c

@@ -129,7 +129,7 @@ void rvt_cq_enter(struct rvt_cq *cq, struct ib_wc *entry, bool solicited)
 		if (likely(worker)) {
 			cq->notify = RVT_CQ_NONE;
 			cq->triggered++;
-			queue_kthread_work(worker, &cq->comptask);
+			kthread_queue_work(worker, &cq->comptask);
 		}
 	}
 
@@ -265,7 +265,7 @@ struct ib_cq *rvt_create_cq(struct ib_device *ibdev,
 	cq->ibcq.cqe = entries;
 	cq->notify = RVT_CQ_NONE;
 	spin_lock_init(&cq->lock);
-	init_kthread_work(&cq->comptask, send_complete);
+	kthread_init_work(&cq->comptask, send_complete);
 	cq->queue = wc;
 
 	ret = &cq->ibcq;
@@ -295,7 +295,7 @@ int rvt_destroy_cq(struct ib_cq *ibcq)
 	struct rvt_cq *cq = ibcq_to_rvtcq(ibcq);
 	struct rvt_dev_info *rdi = cq->rdi;
 
-	flush_kthread_work(&cq->comptask);
+	kthread_flush_work(&cq->comptask);
 	spin_lock(&rdi->n_cqs_lock);
 	rdi->n_cqs_allocated--;
 	spin_unlock(&rdi->n_cqs_lock);
@@ -514,7 +514,7 @@ int rvt_driver_cq_init(struct rvt_dev_info *rdi)
 	rdi->worker = kzalloc(sizeof(*rdi->worker), GFP_KERNEL);
 	if (!rdi->worker)
 		return -ENOMEM;
-	init_kthread_worker(rdi->worker);
+	kthread_init_worker(rdi->worker);
 	task = kthread_create_on_node(
 		kthread_worker_fn,
 		rdi->worker,
@@ -547,7 +547,7 @@ void rvt_cq_exit(struct rvt_dev_info *rdi)
 	/* blocks future queuing from send_complete() */
 	rdi->worker = NULL;
 	smp_wmb(); /* See rdi_cq_enter */
-	flush_kthread_worker(worker);
+	kthread_flush_worker(worker);
 	kthread_stop(worker->task);
 	kfree(worker);
 }

drivers/input/rmi4/rmi_bus.c

@@ -9,7 +9,6 @@
 
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/kconfig.h>
 #include <linux/list.h>
 #include <linux/pm.h>
 #include <linux/rmi.h>

drivers/input/rmi4/rmi_driver.c

@@ -17,7 +17,6 @@
 #include <linux/bitmap.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
-#include <linux/kconfig.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/of.h>

drivers/input/rmi4/rmi_f01.c

@@ -8,7 +8,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/kconfig.h>
 #include <linux/rmi.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>

drivers/input/rmi4/rmi_f11.c

@@ -12,7 +12,6 @@
 #include <linux/device.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
-#include <linux/kconfig.h>
 #include <linux/rmi.h>
 #include <linux/slab.h>
 #include <linux/of.h>

drivers/irqchip/irq-bcm6345-l1.c

@@ -52,7 +52,6 @@
 
 #include <linux/bitops.h>
 #include <linux/cpumask.h>
-#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>

drivers/irqchip/irq-bcm7038-l1.c

@@ -12,7 +12,6 @@
 #define pr_fmt(fmt)	KBUILD_MODNAME	": " fmt
 
 #include <linux/bitops.h>
-#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>

drivers/irqchip/irq-bcm7120-l2.c

@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>

drivers/irqchip/irq-brcmstb-l2.c

@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/kconfig.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/of.h>

drivers/md/dm-rq.c

@@ -581,7 +581,7 @@ static void init_tio(struct dm_rq_target_io *tio, struct request *rq,
 	if (!md->init_tio_pdu)
 		memset(&tio->info, 0, sizeof(tio->info));
 	if (md->kworker_task)
-		init_kthread_work(&tio->work, map_tio_request);
+		kthread_init_work(&tio->work, map_tio_request);
 }
 
 static struct dm_rq_target_io *dm_old_prep_tio(struct request *rq,
@@ -831,7 +831,7 @@ static void dm_old_request_fn(struct request_queue *q)
 		tio = tio_from_request(rq);
 		/* Establish tio->ti before queuing work (map_tio_request) */
 		tio->ti = ti;
-		queue_kthread_work(&md->kworker, &tio->work);
+		kthread_queue_work(&md->kworker, &tio->work);
 		BUG_ON(!irqs_disabled());
 	}
 }
@@ -853,7 +853,7 @@ int dm_old_init_request_queue(struct mapped_device *md)
 	blk_queue_prep_rq(md->queue, dm_old_prep_fn);
 
 	/* Initialize the request-based DM worker thread */
-	init_kthread_worker(&md->kworker);
+	kthread_init_worker(&md->kworker);
 	md->kworker_task = kthread_run(kthread_worker_fn, &md->kworker,
 				       "kdmwork-%s", dm_device_name(md));
 	if (IS_ERR(md->kworker_task))

drivers/md/dm.c

@@ -1891,7 +1891,7 @@ static void __dm_destroy(struct mapped_device *md, bool wait)
 	spin_unlock_irq(q->queue_lock);
 
 	if (dm_request_based(md) && md->kworker_task)
-		flush_kthread_worker(&md->kworker);
+		kthread_flush_worker(&md->kworker);
 
 	/*
 	 * Take suspend_lock so that presuspend and postsuspend methods
@@ -2147,7 +2147,7 @@ static int __dm_suspend(struct mapped_device *md, struct dm_table *map,
 	if (dm_request_based(md)) {
 		dm_stop_queue(md->queue);
 		if (md->kworker_task)
-			flush_kthread_worker(&md->kworker);
+			kthread_flush_worker(&md->kworker);
 	}
 
 	flush_workqueue(md->wq);

drivers/media/dvb-frontends/af9013.h

@@ -25,7 +25,6 @@
 #ifndef AF9013_H
 #define AF9013_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 /* AF9013/5 GPIOs (mostly guessed)

drivers/media/dvb-frontends/af9033.h

@@ -22,8 +22,6 @@
 #ifndef AF9033_H
 #define AF9033_H
 
-#include <linux/kconfig.h>
-
 /*
  * I2C address (TODO: are these in 8-bit format?)
  * 0x38, 0x3a, 0x3c, 0x3e

drivers/media/dvb-frontends/ascot2e.h

@@ -22,7 +22,6 @@
 #ifndef __DVB_ASCOT2E_H__
 #define __DVB_ASCOT2E_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/atbm8830.h

@@ -22,7 +22,6 @@
 #ifndef __ATBM8830_H__
 #define __ATBM8830_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/au8522.h

@@ -22,7 +22,6 @@
 #ifndef __AU8522_H__
 #define __AU8522_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 enum au8522_if_freq {

drivers/media/dvb-frontends/cx22702.h

@@ -28,7 +28,6 @@
 #ifndef CX22702_H
 #define CX22702_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct cx22702_config {

drivers/media/dvb-frontends/cx24113.h

@@ -22,8 +22,6 @@
 #ifndef CX24113_H
 #define CX24113_H
 
-#include <linux/kconfig.h>
-
 struct dvb_frontend;
 
 struct cx24113_config {

drivers/media/dvb-frontends/cx24116.h

@@ -21,7 +21,6 @@
 #ifndef CX24116_H
 #define CX24116_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct cx24116_config {

drivers/media/dvb-frontends/cx24117.h

@@ -22,7 +22,6 @@
 #ifndef CX24117_H
 #define CX24117_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct cx24117_config {

drivers/media/dvb-frontends/cx24120.h

@@ -20,7 +20,6 @@
 #ifndef CX24120_H
 #define CX24120_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/firmware.h>
 

drivers/media/dvb-frontends/cx24123.h

@@ -21,7 +21,6 @@
 #ifndef CX24123_H
 #define CX24123_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct cx24123_config {

drivers/media/dvb-frontends/cxd2820r.h

@@ -22,7 +22,6 @@
 #ifndef CXD2820R_H
 #define CXD2820R_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 #define CXD2820R_GPIO_D (0 << 0) /* disable */

drivers/media/dvb-frontends/cxd2841er.h

@@ -22,7 +22,6 @@
 #ifndef CXD2841ER_H
 #define CXD2841ER_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 enum cxd2841er_xtal {

drivers/media/dvb-frontends/dib3000mc.h

@@ -13,8 +13,6 @@
 #ifndef DIB3000MC_H
 #define DIB3000MC_H
 
-#include <linux/kconfig.h>
-
 #include "dibx000_common.h"
 
 struct dib3000mc_config {

drivers/media/dvb-frontends/dib7000m.h

@@ -1,8 +1,6 @@
 #ifndef DIB7000M_H
 #define DIB7000M_H
 
-#include <linux/kconfig.h>
-
 #include "dibx000_common.h"
 
 struct dib7000m_config {

drivers/media/dvb-frontends/dib7000p.h

@@ -1,8 +1,6 @@
 #ifndef DIB7000P_H
 #define DIB7000P_H
 
-#include <linux/kconfig.h>
-
 #include "dibx000_common.h"
 
 struct dib7000p_config {

drivers/media/dvb-frontends/drxd.h

@@ -24,7 +24,6 @@
 #ifndef _DRXD_H_
 #define _DRXD_H_
 
-#include <linux/kconfig.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/drxk.h

@@ -1,7 +1,6 @@
 #ifndef _DRXK_H_
 #define _DRXK_H_
 
-#include <linux/kconfig.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/ds3000.h

@@ -22,7 +22,6 @@
 #ifndef DS3000_H
 #define DS3000_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct ds3000_config {

drivers/media/dvb-frontends/dvb_dummy_fe.h

@@ -22,7 +22,6 @@
 #ifndef DVB_DUMMY_FE_H
 #define DVB_DUMMY_FE_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/ec100.h

@@ -22,7 +22,6 @@
 #ifndef EC100_H
 #define EC100_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct ec100_config {

drivers/media/dvb-frontends/hd29l2.h

@@ -23,7 +23,6 @@
 #ifndef HD29L2_H
 #define HD29L2_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct hd29l2_config {

drivers/media/dvb-frontends/helene.h

@@ -21,7 +21,6 @@
 #ifndef __DVB_HELENE_H__
 #define __DVB_HELENE_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/horus3a.h

@@ -22,7 +22,6 @@
 #ifndef __DVB_HORUS3A_H__
 #define __DVB_HORUS3A_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/ix2505v.h

@@ -20,7 +20,6 @@
 #ifndef DVB_IX2505V_H
 #define DVB_IX2505V_H
 
-#include <linux/kconfig.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/lg2160.h

@@ -22,7 +22,6 @@
 #ifndef _LG2160_H_
 #define _LG2160_H_
 
-#include <linux/kconfig.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/lgdt3305.h

@@ -22,7 +22,6 @@
 #ifndef _LGDT3305_H_
 #define _LGDT3305_H_
 
-#include <linux/kconfig.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/lgs8gl5.h

@@ -23,7 +23,6 @@
 #ifndef LGS8GL5_H
 #define LGS8GL5_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct lgs8gl5_config {

drivers/media/dvb-frontends/lgs8gxx.h

@@ -26,7 +26,6 @@
 #ifndef __LGS8GXX_H__
 #define __LGS8GXX_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/i2c.h>
 

drivers/media/dvb-frontends/lnbh24.h

@@ -23,8 +23,6 @@
 #ifndef _LNBH24_H
 #define _LNBH24_H
 
-#include <linux/kconfig.h>
-
 /* system register bits */
 #define LNBH24_OLF	0x01
 #define LNBH24_OTF	0x02

drivers/media/dvb-frontends/lnbh25.h

@@ -22,7 +22,6 @@
 #define LNBH25_H
 
 #include <linux/i2c.h>
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 /* 22 kHz tone enabled. Tone output controlled by DSQIN pin */

drivers/media/dvb-frontends/lnbp21.h

@@ -27,8 +27,6 @@
 #ifndef _LNBP21_H
 #define _LNBP21_H
 
-#include <linux/kconfig.h>
-
 /* system register bits */
 /* [RO] 0=OK; 1=over current limit flag */
 #define LNBP21_OLF	0x01

drivers/media/dvb-frontends/lnbp22.h

@@ -28,8 +28,6 @@
 #ifndef _LNBP22_H
 #define _LNBP22_H
 
-#include <linux/kconfig.h>
-
 /* Enable */
 #define LNBP22_EN	  0x10
 /* Voltage selection */

drivers/media/dvb-frontends/m88rs2000.h

@@ -20,7 +20,6 @@
 #ifndef M88RS2000_H
 #define M88RS2000_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/mb86a20s.h

@@ -16,7 +16,6 @@
 #ifndef MB86A20S_H
 #define MB86A20S_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 /**

drivers/media/dvb-frontends/s5h1409.h

@@ -22,7 +22,6 @@
 #ifndef __S5H1409_H__
 #define __S5H1409_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct s5h1409_config {

drivers/media/dvb-frontends/s5h1411.h

@@ -22,7 +22,6 @@
 #ifndef __S5H1411_H__
 #define __S5H1411_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 #define S5H1411_I2C_TOP_ADDR (0x32 >> 1)

drivers/media/dvb-frontends/s5h1432.h

@@ -22,7 +22,6 @@
 #ifndef __S5H1432_H__
 #define __S5H1432_H__
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 #define S5H1432_I2C_TOP_ADDR (0x02 >> 1)

drivers/media/dvb-frontends/s921.h

@@ -17,7 +17,6 @@
 #ifndef S921_H
 #define S921_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct s921_config {

drivers/media/dvb-frontends/si21xx.h

@@ -1,7 +1,6 @@
 #ifndef SI21XX_H
 #define SI21XX_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/sp2.h

@@ -17,7 +17,6 @@
 #ifndef SP2_H
 #define SP2_H
 
-#include <linux/kconfig.h>
 #include "dvb_ca_en50221.h"
 
 /*

drivers/media/dvb-frontends/stb6000.h

@@ -23,7 +23,6 @@
 #ifndef __DVB_STB6000_H__
 #define __DVB_STB6000_H__
 
-#include <linux/kconfig.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/stv0288.h

@@ -27,7 +27,6 @@
 #ifndef STV0288_H
 #define STV0288_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/stv0367.h

@@ -26,7 +26,6 @@
 #ifndef STV0367_H
 #define STV0367_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/stv0900.h

@@ -26,7 +26,6 @@
 #ifndef STV0900_H
 #define STV0900_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/stv6110.h

@@ -25,7 +25,6 @@
 #ifndef __DVB_STV6110_H__
 #define __DVB_STV6110_H__
 
-#include <linux/kconfig.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/tda10048.h

@@ -22,7 +22,6 @@
 #ifndef TDA10048_H
 #define TDA10048_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 #include <linux/firmware.h>
 

drivers/media/dvb-frontends/tda18271c2dd.h

@@ -1,8 +1,6 @@
 #ifndef _TDA18271C2DD_H_
 #define _TDA18271C2DD_H_
 
-#include <linux/kconfig.h>
-
 #if IS_REACHABLE(CONFIG_DVB_TDA18271C2DD)
 struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
 					 struct i2c_adapter *i2c, u8 adr);

drivers/media/dvb-frontends/ts2020.h

@@ -22,7 +22,6 @@
 #ifndef TS2020_H
 #define TS2020_H
 
-#include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
 struct ts2020_config {

drivers/media/dvb-frontends/zl10036.h

@@ -21,7 +21,6 @@
 #ifndef DVB_ZL10036_H
 #define DVB_ZL10036_H
 
-#include <linux/kconfig.h>
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 

drivers/media/dvb-frontends/zl10039.h

@@ -22,8 +22,6 @@
 #ifndef ZL10039_H
 #define ZL10039_H
 
-#include <linux/kconfig.h>
-
 #if IS_REACHABLE(CONFIG_DVB_ZL10039)
 struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
 					u8 i2c_addr,

drivers/media/pci/cx23885/altera-ci.h

@@ -20,8 +20,6 @@
 #ifndef __ALTERA_CI_H
 #define __ALTERA_CI_H
 
-#include <linux/kconfig.h>
-
 #define ALT_DATA	0x000000ff
 #define ALT_TDI		0x00008000
 #define ALT_TDO		0x00004000

drivers/media/pci/ivtv/ivtv-driver.c

@@ -750,7 +750,7 @@ static int ivtv_init_struct1(struct ivtv *itv)
 	spin_lock_init(&itv->lock);
 	spin_lock_init(&itv->dma_reg_lock);
 
-	init_kthread_worker(&itv->irq_worker);
+	kthread_init_worker(&itv->irq_worker);
 	itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker,
 					   "%s", itv->v4l2_dev.name);
 	if (IS_ERR(itv->irq_worker_task)) {
@@ -760,7 +760,7 @@ static int ivtv_init_struct1(struct ivtv *itv)
 	/* must use the FIFO scheduler as it is realtime sensitive */
 	sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, &param);
 
-	init_kthread_work(&itv->irq_work, ivtv_irq_work_handler);
+	kthread_init_work(&itv->irq_work, ivtv_irq_work_handler);
 
 	/* Initial settings */
 	itv->cxhdl.port = CX2341X_PORT_MEMORY;
@@ -1441,7 +1441,7 @@ static void ivtv_remove(struct pci_dev *pdev)
 	del_timer_sync(&itv->dma_timer);
 
 	/* Kill irq worker */
-	flush_kthread_worker(&itv->irq_worker);
+	kthread_flush_worker(&itv->irq_worker);
 	kthread_stop(itv->irq_worker_task);
 
 	ivtv_streams_cleanup(itv);

drivers/media/pci/ivtv/ivtv-irq.c

@@ -1062,7 +1062,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
 	}
 
 	if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) {
-		queue_kthread_work(&itv->irq_worker, &itv->irq_work);
+		kthread_queue_work(&itv->irq_worker, &itv->irq_work);
 	}
 
 	spin_unlock(&itv->dma_reg_lock);

drivers/media/tuners/fc0011.h

@@ -1,7 +1,6 @@
 #ifndef LINUX_FC0011_H_
 #define LINUX_FC0011_H_
 
-#include <linux/kconfig.h>
 #include "dvb_frontend.h"