Merge branch 'amd-xgbe-fixes'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver fixes 2017-02-28

This patch series addresses some issues in the AMD XGBE driver.

The following fixes are included in this driver update series:

- Stop the PHY before disabling and releasing device interrupts so that
  MDIO requests issued by the device can be properly handled
- Set the MDIO communication mode on device startup, not just device
  probe
- Do not overwrite SFP settings when mod_absent is detected

This patch series is based on net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amd/xgbe/xgbe-dev.c

@@ -1323,7 +1323,7 @@ static int xgbe_read_ext_mii_regs(struct xgbe_prv_data *pdata, int addr,
 static int xgbe_set_ext_mii_mode(struct xgbe_prv_data *pdata, unsigned int port,
 				 enum xgbe_mdio_mode mode)
 {
-	unsigned int reg_val = 0;
+	unsigned int reg_val = XGMAC_IOREAD(pdata, MAC_MDIOCL22R);
 
 	switch (mode) {
 	case XGBE_MDIO_MODE_CL22:

drivers/net/ethernet/amd/xgbe/xgbe-drv.c

@@ -1131,12 +1131,12 @@ static void xgbe_stop(struct xgbe_prv_data *pdata)
 	hw_if->disable_tx(pdata);
 	hw_if->disable_rx(pdata);
 
+	phy_if->phy_stop(pdata);
+
 	xgbe_free_irqs(pdata);
 
 	xgbe_napi_disable(pdata, 1);
 
-	phy_if->phy_stop(pdata);
-
 	hw_if->exit(pdata);
 
 	channel = pdata->channel;

drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c

@@ -716,6 +716,8 @@ static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
 		pdata->phy.duplex = DUPLEX_UNKNOWN;
 		pdata->phy.autoneg = AUTONEG_ENABLE;
 		pdata->phy.advertising = pdata->phy.supported;
+
+		return;
 	}
 
 	pdata->phy.advertising &= ~ADVERTISED_Autoneg;
@@ -875,6 +877,16 @@ static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata)
 	    !phy_data->sfp_phy_avail)
 		return 0;
 
+	/* Set the proper MDIO mode for the PHY */
+	ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr,
+					    phy_data->phydev_mode);
+	if (ret) {
+		netdev_err(pdata->netdev,
+			   "mdio port/clause not compatible (%u/%u)\n",
+			   phy_data->mdio_addr, phy_data->phydev_mode);
+		return ret;
+	}
+
 	/* Create and connect to the PHY device */
 	phydev = get_phy_device(phy_data->mii, phy_data->mdio_addr,
 				(phy_data->phydev_mode == XGBE_MDIO_MODE_CL45));
@@ -2722,6 +2734,18 @@ static int xgbe_phy_start(struct xgbe_prv_data *pdata)
 	if (ret)
 		return ret;
 
+	/* Set the proper MDIO mode for the re-driver */
+	if (phy_data->redrv && !phy_data->redrv_if) {
+		ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr,
+						    XGBE_MDIO_MODE_CL22);
+		if (ret) {
+			netdev_err(pdata->netdev,
+				   "redriver mdio port not compatible (%u)\n",
+				   phy_data->redrv_addr);
+			return ret;
+		}
+	}
+
 	/* Start in highest supported mode */
 	xgbe_phy_set_mode(pdata, phy_data->start_mode);