Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

Documentation/devicetree/bindings/arm/armada-38x.txt

@@ -15,6 +15,13 @@ Required root node property:
 
 compatible: must contain "marvell,armada385"
 
+In addition, boards using the Marvell Armada 388 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada388"
+
 Example:
 
 compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";

Documentation/devicetree/bindings/arm/digicolor.txt

@@ -0,0 +1,6 @@
+Conexant Digicolor Platforms Device Tree Bindings
+
+Each device tree must specify which Conexant Digicolor SoC it uses.
+Must be the following compatible string:
+
+  cnxt,cx92755

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -23,7 +23,7 @@ Optional Properties:
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
 
-Node of a device using power domains must have a samsung,power-domain property
+Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.
 
 Example:

Documentation/devicetree/bindings/arm/fsl.txt

@@ -124,3 +124,11 @@ Example:
 		compatible = "fsl,ls1021a-dcfg";
 		reg = <0x0 0x1ee0000 0x0 0x10000>;
 	};
+
+Freescale LS2085A SoC Device Tree Bindings
+------------------------------------------
+
+LS2085A ARMv8 based Simulator model
+Required root node properties:
+    - compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -9,6 +9,10 @@ HiP04 D01 Board
 Required root node properties:
 	- compatible = "hisilicon,hip04-d01";
 
+HiP01 ca9x2 Board
+Required root node properties:
+	- compatible = "hisilicon,hip01-ca9x2";
+
 
 Hisilicon system controller
 
@@ -36,6 +40,27 @@ Example:
 		reboot-offset = <0x4>;
 	};
 
+-----------------------------------------------------------------------
+Hisilicon HiP01 system controller
+
+Required properties:
+- compatible : "hisilicon,hip01-sysctrl"
+- reg : Register address and size
+
+The HiP01 system controller is mostly compatible with hisilicon
+system controller,but it has some specific control registers for
+HIP01 SoC family, such as slave core boot, and also some same
+registers located at different offset.
+
+Example:
+
+	/* for hip01-ca9x2 */
+	sysctrl: system-controller@10000000 {
+		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+		reg = <0x10000000 0x1000>;
+		reboot-offset = <0x4>;
+	};
+
 -----------------------------------------------------------------------
 Hisilicon CPU controller
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt

@@ -7,6 +7,7 @@ Required properties:
 - compatible: should be one of:
 	"mediatek,mt8135-sysirq"
 	"mediatek,mt8127-sysirq"
+	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"
 	"mediatek,mt6577-sysirq"

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -9,6 +9,16 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
+- ChipSPARK Rayeager PX2 board:
+    Required root node properties:
+      - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
+
 - Radxa Rock board:
     Required root node properties:
       - compatible = "radxa,rock", "rockchip,rk3188";
+
+- Firefly Firefly-RK3288 board:
+    Required root node properties:
+      - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
+    or
+      - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt

@@ -0,0 +1,12 @@
+SAMSUNG Exynos SoCs Chipid driver.
+
+Required properties:
+- compatible : Should at least contain "samsung,exynos4210-chipid".
+
+- reg: offset and length of the register set
+
+Example:
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};

Documentation/devicetree/bindings/arm/sirf.txt

@@ -3,7 +3,9 @@ CSR SiRFprimaII and SiRFmarco device tree bindings.
 
 Required root node properties:
     - compatible:
+    - "sirf,atlas6-cb" : atlas6 "cb" evaluation board
+    - "sirf,atlas6" : atlas6 device based board
+    - "sirf,atlas7-cb" : atlas7 "cb" evaluation board
+    - "sirf,atlas7" : atlas7 device based board
     - "sirf,prima2-cb" : prima2 "cb" evaluation board
-    - "sirf,marco-cb" : marco "cb" evaluation board
     - "sirf,prima2" : prima2 device based board
-    - "sirf,marco" : marco device based board

Documentation/devicetree/bindings/bus/mvebu-mbus.txt

@@ -6,8 +6,8 @@ Required properties:
 - compatible:	 Should be set to one of the following:
 		 marvell,armada370-mbus
 		 marvell,armadaxp-mbus
-		 marvell,armada370-mbus
-		 marvell,armadaxp-mbus
+		 marvell,armada375-mbus
+		 marvell,armada380-mbus
 		 marvell,kirkwood-mbus
 		 marvell,dove-mbus
 		 marvell,orion5x-88f5281-mbus

Documentation/devicetree/bindings/clock/alphascale,acc.txt

@@ -0,0 +1,115 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM		0
+CLKID_AHB_RAM		1
+CLKID_AHB_GPIO		2
+CLKID_AHB_MAC		3
+CLKID_AHB_EMI		4
+CLKID_AHB_USB0		5
+CLKID_AHB_USB1		6
+CLKID_AHB_DMA0		7
+CLKID_AHB_DMA1		8
+CLKID_AHB_UART0		9
+CLKID_AHB_UART1		10
+CLKID_AHB_UART2		11
+CLKID_AHB_UART3		12
+CLKID_AHB_UART4		13
+CLKID_AHB_UART5		14
+CLKID_AHB_UART6		15
+CLKID_AHB_UART7		16
+CLKID_AHB_UART8		17
+CLKID_AHB_UART9		18
+CLKID_AHB_I2S0		19
+CLKID_AHB_I2C0		20
+CLKID_AHB_I2C1		21
+CLKID_AHB_SSP0		22
+CLKID_AHB_IOCONFIG	23
+CLKID_AHB_WDT		24
+CLKID_AHB_CAN0		25
+CLKID_AHB_CAN1		26
+CLKID_AHB_MPWM		27
+CLKID_AHB_SPI0		28
+CLKID_AHB_SPI1		29
+CLKID_AHB_QEI		30
+CLKID_AHB_QUADSPI0	31
+CLKID_AHB_CAMIF		32
+CLKID_AHB_LCDIF		33
+CLKID_AHB_TIMER0	34
+CLKID_AHB_TIMER1	35
+CLKID_AHB_TIMER2	36
+CLKID_AHB_TIMER3	37
+CLKID_AHB_IRQ		38
+CLKID_AHB_RTC		39
+CLKID_AHB_NAND		40
+CLKID_AHB_ADC0		41
+CLKID_AHB_LED		42
+CLKID_AHB_DAC0		43
+CLKID_AHB_LCD		44
+CLKID_AHB_I2S1		45
+CLKID_AHB_MAC1		46
+
+CLKID_SYS_CPU		47
+CLKID_SYS_AHB		48
+CLKID_SYS_I2S0M		49
+CLKID_SYS_I2S0S		50
+CLKID_SYS_I2S1M		51
+CLKID_SYS_I2S1S		52
+CLKID_SYS_UART0		53
+CLKID_SYS_UART1		54
+CLKID_SYS_UART2		55
+CLKID_SYS_UART3		56
+CLKID_SYS_UART4		56
+CLKID_SYS_UART5		57
+CLKID_SYS_UART6		58
+CLKID_SYS_UART7		59
+CLKID_SYS_UART8		60
+CLKID_SYS_UART9		61
+CLKID_SYS_SPI0		62
+CLKID_SYS_SPI1		63
+CLKID_SYS_QUADSPI	64
+CLKID_SYS_SSP0		65
+CLKID_SYS_NAND		66
+CLKID_SYS_TRACE		67
+CLKID_SYS_CAMM		68
+CLKID_SYS_WDT		69
+CLKID_SYS_CLKOUT	70
+CLKID_SYS_MAC		71
+CLKID_SYS_LCD		72
+CLKID_SYS_ADCANA	73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+	compatible = "alphascale,asm9260-uart";
+	reg = <0x80010000 0x4000>;
+	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+	interrupts = <19>;
+	status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+	compatible = "alphascale,asm9260-timer";
+	reg = <0x80088000 0x4000>;
+	clocks = <&acc CLKID_AHB_TIMER0>;
+	interrupts = <29>;
+};
+

Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt

@@ -45,7 +45,7 @@ Required properties:
 	       Exynos4 SoCs, there needs no "master" clock.
 	       Exynos5 SoCs, some System MMUs must have "master" clocks.
 - clocks: Required if the System MMU is needed to gate its clock.
-- samsung,power-domain: Required if the System MMU is needed to gate its power.
+- power-domains: Required if the System MMU is needed to gate its power.
 	  Please refer to the following document:
 	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
 
@@ -54,7 +54,7 @@ Examples:
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
@@ -66,5 +66,5 @@ Examples:
 		interrupts = <2 0>;
 		clock-names = "sysmmu", "master";
 		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -28,7 +28,7 @@ Required properties:
 		    for DMA contiguous memory allocation and its size.
 
 Optional properties:
-  - samsung,power-domain : power-domain property defined with a phandle
+  - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
 
 Example:
@@ -38,7 +38,7 @@ mfc: codec@13400000 {
 	compatible = "samsung,mfc-v5";
 	reg = <0x13400000 0x10000>;
 	interrupts = <0 94 0>;
-	samsung,power-domain = <&pd_mfc>;
+	power-domains = <&pd_mfc>;
 	clocks = <&clock 273>;
 	clock-names = "mfc";
 };

Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt

@@ -0,0 +1,44 @@
+DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
+=================================================================
+
+Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
+These memory controllers differ from one SoC variant to another, and are called
+by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+(DBSC3)", "SDRAM Bus State Controller (SBSC)").
+
+Currently memory controller device nodes are used only to reference PM
+domains, and prevent these PM domains from being powered down, which would
+crash the system.
+
+As there exist no actual drivers for these controllers yet, these bindings
+should be considered EXPERIMENTAL for now.
+
+Required properties:
+  - compatible: Must be one of the following SoC-specific values:
+		  - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
+		  - "renesas,dbsc3-r8a7740" (R-Mobile A1)
+		  - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
+  - reg: Must contain the base address and length of the memory controller's
+	 registers.
+
+Optional properties:
+  - interrupts: Must contain a list of interrupt specifiers for memory
+		controller interrupts, if available.
+  - interrupts-names: Must contain a list of interrupt names corresponding to
+		      the interrupts in the interrupts property, if available.
+		      Valid interrupt names are:
+			- "sec" (secure interrupt)
+			- "temp" (normal (temperature) interrupt)
+  - power-domains: Must contain a reference to the PM domain that the memory
+		   controller belongs to, if available.
+
+Example:
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+		power-domains = <&pd_a4bc0>;
+	};

Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt

@@ -0,0 +1,40 @@
+* Freescale Management Complex
+
+The Freescale Management Complex (fsl-mc) is a hardware resource
+manager that manages specialized hardware objects used in
+network-oriented packet processing applications. After the fsl-mc
+block is enabled, pools of hardware resources are available, such as
+queues, buffer pools, I/O interfaces. These resources are building
+blocks that can be used to create functional hardware objects/devices
+such as network interfaces, crypto accelerator instances, L2 switches,
+etc.
+
+Required properties:
+
+    - compatible
+        Value type: <string>
+        Definition: Must be "fsl,qoriq-mc".  A Freescale Management Complex
+                    compatible with this binding must have Block Revision
+                    Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+                    the MC control register region.
+
+    - reg
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Specifies one or two regions
+                    defining the MC's registers:
+
+                       -the first region is the command portal for the
+                        this machine and must always be present
+
+                       -the second region is the MC control registers. This
+                        region may not be present in some scenarios, such
+                        as in the device tree presented to a virtual machine.
+
+Example:
+
+        fsl_mc: fsl-mc@80c000000 {
+                compatible = "fsl,qoriq-mc";
+                reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+                      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+        };
+

Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt

@@ -0,0 +1,99 @@
+DT bindings for the Renesas R-Mobile System Controller
+
+== System Controller Node ==
+
+The R-Mobile System Controller provides the following functions:
+  - Boot mode management,
+  - Reset generation,
+  - Power management.
+
+Required properties:
+- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
+	      fallback.
+	      Examples with soctypes are:
+		- "renesas,sysc-r8a7740" (R-Mobile A1)
+		- "renesas,sysc-sh73a0" (SH-Mobile AG5)
+- reg: Two address start and address range blocks for the device:
+         - The first block refers to the normally accessible registers,
+         - the second block refers to the registers protected by the HPB
+	   semaphore.
+
+Optional nodes:
+- pm-domains: This node contains a hierarchy of PM domain nodes, which should
+  match the Power Area Hierarchy in the Power Domain Specifications section of
+  the device's datasheet.
+
+
+== PM Domain Nodes ==
+
+Each of the PM domain nodes represents a PM domain, as documented by the
+generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
+
+The nodes should be named by the real power area names, and thus their names
+should be unique.
+
+Required properties:
+  - #power-domain-cells: Must be 0.
+
+Optional properties:
+- reg: If the PM domain is not always-on, this property must contain the bit
+       index number for the corresponding power area in the various Power
+       Control and Status Registers. The parent's node must contain the
+       following two properties:
+	 - #address-cells: Must be 1,
+	 - #size-cells: Must be 0.
+       If the PM domain is always-on, this property must be omitted.
+
+
+Example:
+
+This shows a subset of the r8a7740 PM domain hierarchy, containing the
+C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
+which is a subdomain of A4S.
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
+
+
+== PM Domain Consumers ==
+
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node.
+
+Example:
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
+		#pwm-cells = <3>;
+	};

Documentation/devicetree/bindings/serial/mtk-uart.txt

@@ -2,6 +2,8 @@
 
 Required properties:
 - compatible should contain:
+  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
   * "mediatek,mt6582-uart" for MT6582 compatible UARTS
   * "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577)

Documentation/devicetree/bindings/serial/of-serial.txt

@@ -19,6 +19,7 @@ Required properties:
 	- "altr,16550-FIFO64"
 	- "altr,16550-FIFO128"
 	- "fsl,16550-FIFO64"
+	- "fsl,ns16550"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
@@ -43,6 +44,17 @@ Optional properties:
   driver is allowed to detect support for the capability even without this
   property.
 
+Note:
+* fsl,ns16550:
+  ------------
+  Freescale DUART is very similar to the PC16552D (and to a
+  pair of NS16550A), albeit with some nonstandard behavior such as
+  erratum A-004737 (relating to incorrect BRK handling).
+
+  Represents a single port that is compatible with the DUART found
+  on many Freescale chips (examples include mpc8349, mpc8548,
+  mpc8641d, p4080 and ls2085a).
+
 Example:
 
 	uart@80230000 {

Documentation/devicetree/bindings/sound/atmel_ac97c.txt

@@ -0,0 +1,20 @@
+* Atmel AC97 controller
+
+Required properties:
+  - compatible: "atmel,at91sam9263-ac97c"
+  - reg: Address and length of the register set for the device
+  - interrupts: Should contain AC97 interrupt
+  - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound@fffa0000 {
+       compatible = "atmel,at91sam9263-ac97c";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ac97>;
+       reg = <0xfffa0000 0x4000>;
+       interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+
+       ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -12,6 +12,7 @@ adh	AD Holdings Plc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 allwinner	Allwinner Technology Co., Ltd.
+alphascale	AlphaScale Integrated Circuits Systems, Inc.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amd	Advanced Micro Devices (AMD), Inc.
@@ -34,9 +35,11 @@ capella	Capella Microsystems, Inc
 cavium	Cavium, Inc.
 cdns	Cadence Design Systems Inc.
 chipidea	Chipidea, Inc
+chipspark	ChipSPARK
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
+cloudengines	Cloud Engines, Inc.
 cnm	Chips&Media, Inc.
 cnxt	Conexant Systems, Inc.
 cortina	Cortina Systems, Inc.
@@ -65,6 +68,7 @@ everest	Everest Semiconductor Co. Ltd.
 everspin	Everspin Technologies, Inc.
 excito	Excito
 fcs	Fairchild Semiconductor
+firefly	Firefly
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.

Documentation/devicetree/bindings/video/exynos_dsim.txt

@@ -21,7 +21,7 @@ Required properties:
     according to DSI host bindings (see MIPI DSI bindings [1])
 
 Optional properties:
-  - samsung,power-domain: a phandle to DSIM power domain node
+  - power-domains: a phandle to DSIM power domain node
 
 Child nodes:
   Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
@@ -53,7 +53,7 @@ Example:
 		phy-names = "dsim";
 		vddcore-supply = <&vusb_reg>;
 		vddio-supply = <&vmipi_reg>;
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,pll-clock-frequency = <24000000>;

Documentation/devicetree/bindings/video/samsung-fimd.txt

@@ -38,7 +38,7 @@ Required properties:
                property. Must contain "sclk_fimd" and "fimd".
 
 Optional Properties:
-- samsung,power-domain: a phandle to FIMD power domain node.
+- power-domains: a phandle to FIMD power domain node.
 - samsung,invert-vden: video enable signal is inverted
 - samsung,invert-vclk: video clock signal is inverted
 - display-timings: timing settings for FIMD, as described in document [1].
@@ -97,7 +97,7 @@ SoC specific DT entry:
 		interrupts = <11 0>, <11 1>, <11 2>;
 		clocks = <&clock 140>, <&clock 283>;
 		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/Makefile

@@ -1,83 +1,91 @@
 ifeq ($(CONFIG_OF),y)
 
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
 # Keep at91 dtb files sorted alphabetically for each SoC
-# rm9200
-dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
-# sam9260
-dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
-dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
-dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
-# sam9261
-dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
-# sam9263
-dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
-# sam9g45
-dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
-# sam9n12
-dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
-# sam9rl
-dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
-# sam9x5
-dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
-# sama5d3
-dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d3_xplained.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
-# sama5d4
-dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d4ek.dtb
-
-dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
+dtb-$(CONFIG_SOC_SAM_V4_V5) += \
+	at91rm9200ek.dtb \
+	mpa1600.dtb \
+	animeo_ip.dtb \
+	at91-qil_a9260.dtb \
+	aks-cdu.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	tny_a9260.dtb \
+	usb_a9260.dtb \
+	at91sam9261ek.dtb \
+	at91sam9263ek.dtb \
+	tny_a9263.dtb \
+	usb_a9263.dtb \
+	at91-foxg20.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	kizbox.dtb \
+	tny_a9g20.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
+	at91-ariag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
+	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-sama5d3_xplained.dtb \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	at91-sama5d4ek.dtb
+dtb-$(CONFIG_ARCH_ATLAS6) += \
+	atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_ATLAS7) += \
+	atlas7-evb.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-b-plus.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
 	bcm4708-netgear-r6250.dtb \
 	bcm4708-netgear-r6300-v2.dtb \
 	bcm47081-asus-rt-n18u.dtb \
-	bcm47081-buffalo-wzr-600dhp2.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb
+dtb-$(CONFIG_ARCH_BCM_63XX) += \
+	bcm963138dvt.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
 	bcm911360k.dtb \
 	bcm958300k.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb	\
-	berlin2cd-google-chromecast.dtb	\
+	berlin2-sony-nsz-gs7.dtb \
+	berlin2cd-google-chromecast.dtb \
 	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_BRCMSTB) += \
 	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
-	exynos3250-rinato.dtb \
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_EFM32) += \
+	efm32gg-dk3750.dtb
+dtb-$(CONFIG_ARCH_EXYNOS3) += \
+	exynos3250-monk.dtb \
+	exynos3250-rinato.dtb
+dtb-$(CONFIG_ARCH_EXYNOS4) += \
 	exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
@@ -88,7 +96,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
 	exynos4412-origen.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb \
+	exynos4412-trats2.dtb
+dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
@@ -98,20 +107,31 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5422-odroidxu3.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
 	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
+dtb-$(CONFIG_ARCH_KEYSTONE) += \
+	k2hk-evm.dtb \
 	k2l-evm.dtb \
 	k2e-evm.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-b3.dtb \
+	kirkwood-blackarmor-nas220.dtb \
 	kirkwood-cloudbox.dtb \
 	kirkwood-d2net.dtb \
 	kirkwood-db-88f6281.dtb \
@@ -160,6 +180,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
 	kirkwood-openrd-base.dtb \
 	kirkwood-openrd-client.dtb \
 	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
 	kirkwood-rd88f6192.dtb \
 	kirkwood-rd88f6281-z0.dtb \
 	kirkwood-rd88f6281-a.dtb \
@@ -174,37 +195,47 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
 	kirkwood-ts219-6282.dtb \
 	kirkwood-ts419-6281.dtb \
 	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
-dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \
+dtb-$(CONFIG_ARCH_LPC32XX) += \
+	ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_MACH_MESON6) += \
+	meson6-atv1200.dtb
+dtb-$(CONFIG_ARCH_MMP) += \
+	pxa168-aspenite.dtb \
 	pxa910-dkb.dtb \
 	mmp2-brownstone.dtb
-dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MXC) += \
+dtb-$(CONFIG_ARCH_MOXART) += \
+	moxart-uc7112lx.dtb
+dtb-$(CONFIG_SOC_IMX1) += \
 	imx1-ads.dtb \
-	imx1-apf9328.dtb \
+	imx1-apf9328.dtb
+dtb-$(CONFIG_SOC_IMX25) += \
 	imx25-eukrea-mbimxsd25-baseboard.dtb \
 	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
 	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
 	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
 	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb \
+	imx25-pdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
 	imx27-apf27.dtb \
 	imx27-apf27dev.dtb \
 	imx27-eukrea-mbimxsd27-baseboard.dtb \
 	imx27-pdk.dtb \
 	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb \
-	imx31-bug.dtb \
+	imx27-phytec-phycard-s-rdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
+	imx31-bug.dtb
+dtb-$(CONFIG_SOC_IMX35) += \
 	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb \
-	imx50-evk.dtb \
+	imx35-pdk.dtb
+dtb-$(CONFIG_SOC_IMX50) += \
+	imx50-evk.dtb
+dtb-$(CONFIG_SOC_IMX51) += \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
 	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb
+dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ard.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
@@ -213,7 +244,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx53-smd.dtb \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
-	imx53-voipac-bsb.dtb \
+	imx53-voipac-bsb.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-aristainetos_4.dtb \
 	imx6dl-aristainetos_7.dtb \
 	imx6dl-cubox-i.dtb \
@@ -234,6 +266,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-tx6dl-comtft.dtb \
 	imx6dl-tx6u-801x.dtb \
 	imx6dl-tx6u-811x.dtb \
+	imx6dl-udoo.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
 	imx6q-arm2.dtb \
@@ -257,23 +290,29 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
 	imx6q-tbs2910.dtb \
-	imx6q-udoo.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
 	imx6q-tx6q-1010.dtb \
 	imx6q-tx6q-1010-comtft.dtb \
 	imx6q-tx6q-1020.dtb \
 	imx6q-tx6q-1020-comtft.dtb \
 	imx6q-tx6q-1110.dtb \
-	imx6sl-evk.dtb \
-	imx6sx-sdb.dtb \
+	imx6q-udoo.dtb \
+	imx6q-wandboard.dtb \
+	imx6q-wandboard-revb1.dtb
+dtb-$(CONFIG_SOC_IMX6SL) += \
+	imx6sl-evk.dtb
+dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-sabreauto.dtb \
+	imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
-	ls1021a-twr.dtb \
+	ls1021a-twr.dtb
+dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
 	vf610-colibri-eval-v3.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
-dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+dtb-$(CONFIG_ARCH_MXS) += \
+	imx23-evk.dtb \
 	imx23-olinuxino.dtb \
 	imx23-stmp378x_devb.dtb \
 	imx28-apf28.dtb \
@@ -294,17 +333,21 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \
+dtb-$(CONFIG_ARCH_NOMADIK) += \
+	ste-nomadik-s8815.dtb \
 	ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+	nspire-cx.dtb \
 	nspire-tp.dtb \
 	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \
+dtb-$(CONFIG_ARCH_OMAP2) += \
+	omap2420-h4.dtb \
 	omap2420-n800.dtb \
 	omap2420-n810.dtb \
 	omap2420-n810-wimax.dtb \
 	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
+dtb-$(CONFIG_ARCH_OMAP3) += \
+	am3517-craneboard.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	omap3430-sdp.dtb \
@@ -348,7 +391,10 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
 	omap3-sbc-t3730.dtb \
 	omap3-thunder.dtb \
 	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
+dtb-$(CONFIG_SOC_TI81XX) += \
+	dm8168-evm.dtb
+dtb-$(CONFIG_SOC_AM33XX) += \
+	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
 	am335x-evm.dtb \
@@ -356,7 +402,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
 	am335x-nano.dtb \
 	am335x-pepper.dtb \
 	am335x-lxm.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
+dtb-$(CONFIG_ARCH_OMAP4) += \
+	omap4-duovero-parlor.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -364,20 +411,26 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
 	omap4-sdp-es23plus.dtb \
 	omap4-var-dvk-om44.dtb \
 	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
+dtb-$(CONFIG_SOC_AM43XX) += \
+	am43x-epos-evm.dtb \
 	am437x-sk-evm.dtb \
+	am437x-idk-evm.dtb \
 	am437x-gp-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
+dtb-$(CONFIG_SOC_OMAP5) += \
+	omap5-cm-t54.dtb \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+dtb-$(CONFIG_SOC_DRA7XX) += \
+	dra7-evm.dtb \
 	am57xx-beagle-x15.dtb \
 	dra72-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += \
+	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
@@ -388,17 +441,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
+	rk3066a-rayeager.dtb \
 	rk3188-radxarock.dtb \
 	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+	rk3288-evb-rk808.dtb \
+	rk3288-firefly-beta.dtb \
+	rk3288-firefly.dtb
+dtb-$(CONFIG_ARCH_S3C24XX) += \
+	s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += \
+	s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
+dtb-$(CONFIG_ARCH_S5PV210) += \
+	s5pv210-aquila.dtb \
 	s5pv210-goni.dtb \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
@@ -413,44 +473,58 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
 	sh7372-mackerel.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
+	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
+	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7794-alt.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+dtb-$(CONFIG_ARCH_SOCFPGA) += \
+	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
 	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+dtb-$(CONFIG_ARCH_SPEAR13XX) += \
+	spear1310-evb.dtb \
 	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+dtb-$(CONFIG_ARCH_SPEAR3XX) += \
+	spear300-evb.dtb \
 	spear310-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+dtb-$(CONFIG_ARCH_SPEAR6XX) += \
+	spear600-evb.dtb
+dtb-$(CONFIG_ARCH_STI) += \
+	stih407-b2120.dtb \
 	stih410-b2120.dtb \
 	stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2000.dtb \
 	stih416-b2020.dtb \
-	stih416-b2020e.dtb
+	stih416-b2020e.dtb \
+	stih418-b2199.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
 	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
 	sun4i-a10-inet97fv2.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a13-hsg-h702.dtb \
@@ -460,9 +534,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
 	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-m9.dtb
+	sun6i-a31-m9.dtb \
+	sun6i-a31s-cs908.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-hummingbird.dtb \
@@ -473,10 +549,12 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-olinuxino-micro.dtb \
 	sun7i-a20-pcduino3.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-ippo-q8h-v5.dtb
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb
-dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
@@ -485,34 +563,43 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-tec.dtb \
 	tegra20-trimslice.dtb \
 	tegra20-ventana.dtb \
-	tegra20-whistler.dtb \
+	tegra20-whistler.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-apalis-eval.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb \
+	tegra30-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
 	tegra114-dalmore.dtb \
 	tegra114-roth.dtb \
-	tegra114-tn7.dtb \
+	tegra114-tn7.dtb
+dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
 	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+dtb-$(CONFIG_ARCH_U300) += \
+	ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += \
+	ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
 	ste-hrefv60plus-stuib.dtb \
 	ste-hrefv60plus-tvk.dtb \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
 	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
 	vexpress-v2p-ca9.dtb \
 	vexpress-v2p-ca15-tc1.dtb \
 	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
+dtb-$(CONFIG_ARCH_VIRT) += \
+	xenvm-4.2.dtb
+dtb-$(CONFIG_ARCH_VT8500) += \
+	vt8500-bv07.dtb \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb \
 	wm8750-apc8750.dtb \
@@ -533,8 +620,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-385-db.dtb \
-	armada-385-rd.dtb
+	armada-385-db-ap.dtb \
+	armada-388-db.dtb \
+	armada-388-gp.dtb \
+	armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
@@ -544,17 +633,18 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-netgear-rn2120.dtb \
 	armada-xp-openblocks-ax3-4.dtb \
 	armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+dtb-$(CONFIG_MACH_DOVE) += \
+	dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-cubox-es.dtb \
 	dove-d2plug.dtb \
 	dove-d3plug.dtb \
 	dove-dove-db.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
-
 endif
 
 always		:= $(dtb-y)

arch/arm/boot/dts/alphascale-asm9260-devkit.dts

@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};

arch/arm/boot/dts/alphascale-asm9260.dtsi

@@ -0,0 +1,63 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x2000000>;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	osc24m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-accuracy = <30000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		acc: clock-controller@80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x204>;
+		};
+
+		icoll: interrupt-controller@80054000 {
+			compatible = "alphascale,asm9260-icoll";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		timer0: timer@80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};

arch/arm/boot/dts/am4372.dtsi

@@ -948,6 +948,22 @@
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		vpfe0: vpfe@48326000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48326000 0x2000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe0";
+			status = "disabled";
+		};
+
+		vpfe1: vpfe@48328000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48328000 0x2000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe1";
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -268,6 +268,78 @@
 			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
 		>;
 	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_default: vpfe1_pins_default {
+		pinctrl-single,pins = <
+			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_sleep: vpfe1_pins_sleep {
+		pinctrl-single,pins = <
+			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+		>;
+	};
 };
 
 &i2c0 {
@@ -545,3 +617,37 @@
 	pinctrl-0 = <&dcan1_default>;
 	status = "okay";
 };
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -0,0 +1,405 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x Industrial Development Kit";
+	compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+
+	v24_0d: fixed-regulator-v24_0d {
+		compatible = "regulator-fixed";
+		regulator-name = "V24_0D";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixed-regulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_corereg: fixed-regulator-vdd_corereg {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_COREREG";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_core: fixed-regulator-vdd_core {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_CORE";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_corereg>;
+	};
+
+	v1_8dreg: fixed-regulator-v1_8dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8DREG";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_8d: fixed-regulator-v1_8d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8D";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_8dreg>;
+	};
+
+	v1_5dreg: fixed-regulator-v1_5dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5DREG";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_5d: fixed-regulator-v1_5d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5D";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_5dreg>;
+	};
+
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			label = "power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&am43xx_pinmux {
+	gpio_keys_pins_default: gpio_keys_pins_default {
+		pinctrl-single,pins = <
+			0x1b8 (PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c0_pins_sleep: i2c0_pins_sleep {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+		>;
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins_default {
+		pinctrl-single,pins = <
+			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+		pinctrl-single,pins = <
+			0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ecap0_pins_default: backlight_pins_default {
+		pinctrl-single,pins = <
+			0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	qspi_pins_default: qspi_pins_default {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	qspi_pins_sleep: qspi_pins_sleep{
+		pinctrl-single,pins = <
+			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_default>;
+	pinctrl-1 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	tps: tps62362@60 {
+		compatible = "ti,tps62362";
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1330000>;
+		regulator-boot-on;
+		regulator-always-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		vin-supply = <&v3_3d>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	vmmc-supply = <&v3_3d>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_pins_default>;
+	pinctrl-1 = <&qspi_pins_sleep>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * MTD partition table.  The ROM checks the first 512KiB for a
+		 * valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&tps>;
+};

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -153,20 +153,26 @@
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
+			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
 			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
@@ -184,35 +190,75 @@
 		>;
 	};
 
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+		>;
+	};
+
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 
 			/* Slave 2 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
 		>;
 	};
 
@@ -251,8 +297,8 @@
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
@@ -266,46 +312,46 @@
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS AC BIAS EN */
+			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT | MUX_MODE1)
+			0x028 (PIN_OUTPUT | MUX_MODE1)
+			0x02c (PIN_OUTPUT | MUX_MODE1)
+			0x030 (PIN_OUTPUT | MUX_MODE1)
+			0x034 (PIN_OUTPUT | MUX_MODE1)
+			0x038 (PIN_OUTPUT | MUX_MODE1)
+			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)
+			0x0ac (PIN_OUTPUT | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)
+			0x0bc (PIN_OUTPUT | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)
+			0x0cc (PIN_OUTPUT | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)
+			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
 
 		>;
 	};
 
 	qspi_pins: qspi_pins {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
@@ -323,6 +369,18 @@
 			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 		>;
 	};
+
+	usb1_pins: usb1_pins {
+		pinctrl-single,pins = <
+			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+
+	usb2_pins: usb2_pins {
+		pinctrl-single,pins = <
+			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
 };
 
 &i2c0 {
@@ -386,6 +444,11 @@
 			regulator-always-on;
 		};
 
+		power-button {
+			compatible = "ti,tps65218-pwrbutton";
+			status = "okay";
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		};
 	};
 
 	at24@50 {
@@ -479,6 +542,8 @@
 &usb1 {
 	dr_mode = "peripheral";
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
 };
 
 &usb2_phy2 {
@@ -488,6 +553,8 @@
 &usb2 {
 	dr_mode = "host";
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
 };
 
 &qspi {
@@ -610,3 +677,25 @@
 &wdt {
 	status = "okay";
 };
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	/* Camera port */
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -243,6 +243,42 @@
 				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
+
+		vpfe1_pins_default: vpfe1_pins_default {
+			pinctrl-single,pins = <
+				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+			>;
+		};
+
+		vpfe1_pins_sleep: vpfe1_pins_sleep {
+			pinctrl-single,pins = <
+				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -634,3 +670,20 @@
 		};
 	};
 };
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -80,6 +80,28 @@
 			default-state = "off";
 		};
 	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb1_pins>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb2_pins>;
+	};
 };
 
 &dra7_pmx_core {
@@ -140,6 +162,86 @@
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
@@ -164,6 +266,17 @@
 		>;
 	};
 
+	extcon_usb1_pins: extcon_usb1_pins {
+		pinctrl-single,pins = <
+			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+		>;
+	};
+
+	extcon_usb2_pins: extcon_usb2_pins {
+		pinctrl-single,pins = <
+			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -314,6 +427,12 @@
 			wakeup-source;
 			ti,palmas-long-press-seconds = <12>;
 		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 	};
 
 	tmp102: tmp102@48 {
@@ -365,6 +484,32 @@
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";
 
@@ -403,3 +548,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
 };
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	dr_mode = "peripheral";
+};

arch/arm/boot/dts/armada-370-db.dts

@@ -8,9 +8,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -3,9 +3,43 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-netgear-rn104.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-rd.dts

@@ -6,9 +6,43 @@
  *
  *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default

arch/arm/boot/dts/armada-370-synology-ds213j.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -8,9 +8,43 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * This file contains the definitions that are common to the Armada
  * 370 and Armada XP SoC.

arch/arm/boot/dts/armada-370.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada 370 SoC that are not
  * common to all Armada SoCs.

arch/arm/boot/dts/armada-375-db.dts

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-375.dtsi

@@ -6,9 +6,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -63,7 +97,7 @@
 	};
 
 	soc {
-		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+		compatible = "marvell,armada375-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		controller = <&mbusc>;

arch/arm/boot/dts/armada-380.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-38x.dtsi"
@@ -32,9 +66,8 @@
 
 	soc {
 		internal-regs {
-			pinctrl {
+			pinctrl@18000 {
 				compatible = "marvell,mv88f6810-pinctrl";
-				reg = <0x18000 0x20>;
 			};
 		};
 

arch/arm/boot/dts/armada-385-db-ap.dts

@@ -0,0 +1,178 @@
+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 Access Point Development Board";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi1: spi@10680 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins>;
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <54000000>;
+				};
+			};
+
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				/*
+				 * This bus is wired to two EEPROM
+				 * sockets, one of which holding the
+				 * board ID used by the	bootloader.
+				 * Erasing this EEPROM's content will
+				 * brick the board.
+				 * Use this bus with caution.
+				 */
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy2: ethernet-phy@6 {
+					reg = <6>;
+				};
+			};
+
+			/* UART0 is exposed through the JP8 connector */
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/*
+			 * UART1 is exposed through a FTDI chip
+			 * wired to the mini-USB connector
+			 */
+			uart1: serial@12100 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+
+				/*
+				 * The Reference Clock 0 is used to
+				 * provide a clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The three PCIe units are accessible through
+			 * standard mini-PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/armada-385-rd.dts

@@ -1,97 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 Reference Design board
- * (RD-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};

arch/arm/boot/dts/armada-385.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-38x.dtsi"
@@ -37,9 +71,8 @@
 
 	soc {
 		internal-regs {
-			pinctrl {
+			pinctrl@18000 {
 				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
 			};
 		};
 

arch/arm/boot/dts/armada-385-db.dts → arch/arm/boot/dts/armada-388-db.dts

@@ -1,22 +1,57 @@
 /*
- * Device Tree file for Marvell Armada 385 evaluation board
+ * Device Tree file for Marvell Armada 388 evaluation board
  * (DB-88F6820)
  *
  *  Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-#include "armada-385.dtsi"
+#include "armada-388.dtsi"
 
 / {
 	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
@@ -74,7 +109,7 @@
 				phy-mode = "rgmii-id";
 			};
 
-			mdio {
+			mdio@72004 {
 				phy0: ethernet-phy@0 {
 					reg = <0>;
 				};

arch/arm/boot/dts/armada-388-gp.dts

@@ -0,0 +1,414 @@
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 GP";
+	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins>;
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+					m25p,fast-read;
+				};
+			};
+
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+				/*
+				 * The EEPROM located at adresse 54 is needed
+				 * for the boot - DO NOT ERASE IT -
+				 */
+
+				expander0: pca9555@20 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x20>;
+				};
+
+				expander1: pca9555@21 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x21>;
+				};
+
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON16
+				 * through an FTDI
+				 */
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/* GE1 CON15 */
+			ethernet@30000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* CON4 */
+			usb@50000 {
+				vcc-supply = <&reg_usb2_0_vbus>;
+				status = "okay";
+			};
+
+			/* GE0 CON1 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+				/*
+				 * The Reference Clock 0 is used to provide a
+				 * clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata1>;
+				};
+			};
+
+			sata@e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata2>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata3>;
+				};
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			/* CON5 */
+			usb3@f0000 {
+				vcc-supply = <&reg_usb2_1_vbus>;
+				status = "okay";
+			};
+
+			/* CON7 */
+			usb3@f8000 {
+				vcc-supply = <&reg_usb3_vbus>;
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * The two other PCIe units are accessible
+			 * through mini PCIe slot on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <	 0 0
+					      3000 1>;
+		};
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_0_vbus: v5-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		enable-active-high;
+		regulator-always-on;
+
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_sata1: pwr-sata1 {
+		regulator-name = "pwr_en_sata1";
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata1: v5-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_12v_sata1: v12-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_sata2: pwr-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata2";
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata2: v5-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_12v_sata2: v12-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata2";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_sata3: pwr-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata3";
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata3: v5-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata3>;
+	};
+
+	reg_12v_sata3: v12-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata3";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata3>;
+	};
+};
+
+&pinctrl {
+	pca0_pins: pca0_pins {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};

arch/arm/boot/dts/armada-388-rd.dts

@@ -0,0 +1,132 @@
+/*
+ * Device Tree file for Marvell Armada 388 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada388",
+		"marvell,armada385","marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/armada-388.dtsi

@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6828-pinctrl";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};

arch/arm/boot/dts/armada-38x.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -31,8 +65,7 @@
 	};
 
 	soc {
-		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
-			     "simple-bus";
+		compatible = "marvell,armada380-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		controller = <&mbusc>;
@@ -173,7 +206,7 @@
 				status = "disabled";
 			};
 
-			serial@12000 {
+			uart0: serial@12000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
@@ -193,9 +226,94 @@
 				status = "disabled";
 			};
 
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
+			pinctrl: pinctrl@18000 {
 				reg = <0x18000 0x20>;
+
+				ge0_rgmii_pins: ge-rgmii-pins-0 {
+					marvell,pins = "mpp6", "mpp7", "mpp8",
+						       "mpp9", "mpp10", "mpp11",
+						       "mpp12", "mpp13", "mpp14",
+						       "mpp15", "mpp16", "mpp17";
+					marvell,function = "ge0";
+				};
+
+				ge1_rgmii_pins: ge-rgmii-pins-1 {
+					marvell,pins = "mpp21", "mpp27", "mpp28",
+						       "mpp29", "mpp30", "mpp31",
+						       "mpp32", "mpp37", "mpp38",
+						       "mpp39", "mpp40", "mpp41";
+					marvell,function = "ge1";
+				};
+
+				i2c0_pins: i2c-pins-0 {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				mdio_pins: mdio-pins {
+					marvell,pins = "mpp4", "mpp5";
+					marvell,function = "ge";
+				};
+
+				ref_clk0_pins: ref-clk-pins-0 {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+
+				ref_clk1_pins: ref-clk-pins-1 {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+
+				spi0_pins: spi-pins-0 {
+					marvell,pins = "mpp22", "mpp23", "mpp24",
+						       "mpp25";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi-pins-1 {
+					marvell,pins = "mpp56", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "spi1";
+				};
+
+				uart0_pins: uart-pins-0 {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart-pins-1 {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				sdhci_pins: sdhci-pins {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+						       "mpp52", "mpp53", "mpp54",
+						       "mpp55", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "sd0";
+				};
+
+				sata0_pins: sata-pins-0 {
+					marvell,pins = "mpp20";
+					marvell,function = "sata0";
+				};
+
+				sata1_pins: sata-pins-1 {
+					marvell,pins = "mpp19";
+					marvell,function = "sata1";
+				};
+
+				sata2_pins: sata-pins-2 {
+					marvell,pins = "mpp47";
+					marvell,function = "sata2";
+				};
+
+				sata3_pins: sata-pins-3 {
+					marvell,pins = "mpp44";
+					marvell,function = "sata3";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -373,7 +491,7 @@
 				status = "disabled";
 			};
 
-			mdio {
+			mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";

arch/arm/boot/dts/armada-xp-axpwifiap.dts

@@ -3,16 +3,50 @@
  *
  * Note: this board is shipped with a new generation boot loader that
  * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
  *
  * Copyright (C) 2013 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -60,10 +94,12 @@
 		};
 
 		internal-regs {
+			/* UART0 */
 			serial@12000 {
 				status = "okay";
 			};
 
+			/* UART1 */
 			serial@12100 {
 				status = "okay";
 			};

arch/arm/boot/dts/armada-xp-db.dts

@@ -8,9 +8,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
   *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default

arch/arm/boot/dts/armada-xp-gp.dts

@@ -8,9 +8,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-matrix.dts

@@ -5,9 +5,43 @@
  *
  * Lior Amsalem <alior@marvell.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP MV78230 SoC that are not
  * common to all Armada XP SoCs.

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  * common to all Armada XP SoCs.

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP MV78460 SoC that are not
  * common to all Armada XP SoCs.

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-synology-ds414.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).

arch/arm/boot/dts/armada-xp.dtsi

@@ -8,9 +8,43 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP SoC that are not
  * common to all Armada SoCs.

arch/arm/boot/dts/at91sam9263.dtsi

@@ -695,6 +695,16 @@
 					};
 				};
 
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -823,6 +833,17 @@
 				status = "disabled";
 			};
 
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&ac97_clk>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -54,7 +54,7 @@
 				status = "okay";
 
 				wm8904: codec@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -53,6 +53,8 @@
 			};
 
 			usb2: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_board_usb2>;
 				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -80,6 +82,13 @@
 							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
 					};
 				};
+
+				usb2 {
+					pinctrl_board_usb2: usb2-board {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {

arch/arm/boot/dts/atlas7-evb.dts

@@ -0,0 +1,110 @@
+/*
+ * DTS file for CSR SiRFatlas7 Evaluation Board
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "atlas7.dtsi"
+
+/ {
+	model = "CSR SiRFatlas7 Evaluation Board";
+	compatible = "sirf,atlas7-cb", "sirf,atlas7";
+
+	chosen {
+		bootargs = "console=ttySiRF1,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vpp_reserved: vpp_mem@5e800000 {
+			compatible = "sirf,reserved-memory";
+			reg = <0x5e800000 0x800000>;
+		};
+
+		nanddisk_reserved: nanddisk@46000000 {
+			reg = <0x46000000 0x200000>;
+			no-map;
+		};
+	};
+
+
+	noc {
+		mediam {
+			nand@17050000 {
+				memory-region = <&nanddisk_reserved>;
+			};
+		};
+
+		gnssm {
+			spi1: spi@18200000 {
+				status = "okay";
+				spiflash: macronix@0{
+					status = "okay";
+					compatible = "macronix,mx25l6405d";
+					reg = <0>;
+					spi-max-frequency = <37500000>;
+					spi-cpha;
+					spi-cpol;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partitions@0 {
+						label = "myspiboot";
+						reg = <0x0 0x800000>;
+					};
+				};
+			};
+		};
+
+		btm {
+			uart6: uart@11000000 {
+				status = "okay";
+				sirf,uart-has-rtscts;
+			};
+		};
+
+		disp-iobg {
+			vpp@13110000 {
+				memory-region = <&vpp_reserved>;
+			};
+		};
+
+		display0: display@0 {
+			compatible = "lvds-panel";
+			source = "lvds.0";
+
+			bl-gpios = <&gpio_1 63 0>;
+			data-lines  = <24>;
+
+			display-timings {
+				native-mode = <&timing0>;
+				timing0: timing0 {
+					clock-frequency = <60000000>;
+					hactive = <1024>;
+					vactive = <600>;
+					hfront-porch = <220>;
+					hback-porch = <100>;
+					hsync-len = <1>;
+					vback-porch = <10>;
+					vfront-porch = <25>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/atlas7.dtsi

@@ -0,0 +1,813 @@
+/*
+ * DTS file for CSR SiRFatlas7 SoC
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,atlas7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial9 = &usp2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+		};
+	};
+
+	noc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x10000000 0x10000000 0xc0000000>;
+
+		gic: interrupt-controller@10301000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x10301000 0x1000>,
+			     <0x10302000 0x0100>;
+		};
+
+		pmu_regulator: pmu_regulator@10E30020 {
+			compatible = "sirf,atlas7-pmu-ldo";
+			reg = <0x10E30020 0x4>;
+			ldo: ldo {
+				regulator-name = "ldo";
+			};
+		};
+
+		atlas7_codec: atlas7_codec@10E30000 {
+			#sound-dai-cells = <0>;
+			compatible = "sirf,atlas7-codec";
+			reg = <0x10E30000 0x400>;
+			clocks = <&car 62>;
+			ldo-supply = <&ldo>;
+		};
+
+		atlas7_iacc: atlas7_iacc@10D01000 {
+			#sound-dai-cells = <0>;
+			compatible = "sirf,atlas7-iacc";
+			reg = <0x10D01000 0x100>;
+			dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
+				<&dmac3 3>, <&dmac3 9>;
+			dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
+			clocks = <&car 62>;
+		};
+
+		ipc@13240000 {
+			compatible = "sirf,atlas7-ipc";
+			ranges = <0x13240000 0x13240000 0x00010000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			hwspinlock {
+				compatible = "sirf,hwspinlock";
+				reg = <0x13240000 0x00010000>;
+
+				num-spinlocks = <30>;
+			};
+
+			ns_m3_rproc@0 {
+				compatible = "sirf,ns2m30-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 123 0>;
+			};
+
+			ns_m3_rproc@1 {
+				compatible = "sirf,ns2m31-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 126 0>;
+			};
+
+			ns_kal_rproc@0 {
+				compatible = "sirf,ns2kal0-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 124 0>;
+			};
+
+			ns_kal_rproc@1 {
+				compatible = "sirf,ns2kal1-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 127 0>;
+			};
+		};
+
+		pinctrl: ioc@18880000 {
+			compatible = "sirf,atlas7-ioc";
+			reg = <0x18880000 0x1000>,
+				<0x10E40000 0x1000>;
+		};
+
+		pmipc {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13240000 0x13240000 0x00010000>;
+			pmipc@0x13240000 {
+				compatible = "sirf,atlas7-pmipc";
+				reg = <0x13240000 0x00010000>;
+			};
+		};
+
+		dramfw {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10830000 0x10830000 0x18000>;
+			dramfw@10820000 {
+				compatible = "sirf,nocfw-dramfw";
+				reg = <0x10830000 0x18000>;
+			};
+		};
+
+		spramfw {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10250000 0x10250000 0x3000>;
+			spramfw@10820000 {
+				compatible = "sirf,nocfw-spramfw";
+				reg = <0x10250000 0x3000>;
+			};
+		};
+
+		cpum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10200000 0x10200000 0x3000>;
+			cpum@10200000 {
+				compatible = "sirf,nocfw-cpum";
+				reg = <0x10200000 0x3000>;
+			};
+		};
+
+		cgum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18641000 0x18641000 0x3000>,
+					 <0x18620000 0x18620000 0x1000>;
+
+			cgum@18641000 {
+				compatible = "sirf,nocfw-cgum";
+				reg = <0x18641000 0x3000>;
+			};
+
+			car: clock-controller@18620000 {
+				compatible = "sirf,atlas7-car";
+				reg = <0x18620000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
+		gnssm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18000000 0x18000000 0x0000ffff>,
+				<0x18010000 0x18010000 0x1000>,
+				<0x18020000 0x18020000 0x1000>,
+				<0x18030000 0x18030000 0x1000>,
+				<0x18040000 0x18040000 0x1000>,
+				<0x18050000 0x18050000 0x1000>,
+				<0x18060000 0x18060000 0x1000>,
+				<0x18100000 0x18100000 0x3000>,
+				<0x18250000 0x18250000 0x10000>,
+				<0x18200000 0x18200000 0x1000>;
+
+			dmac0: dma-controller@18000000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x18000000 0x1000>;
+				interrupts = <0 12 0>;
+				clocks = <&car 89>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			gnssmfw@0x18100000 {
+				compatible = "sirf,nocfw-gnssm";
+				reg = <0x18100000 0x3000>;
+			};
+
+			uart0: uart@18010000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18010000 0x1000>;
+				interrupts = <0 17 0>;
+				clocks = <&car 90>;
+				fifosize = <128>;
+				dmas = <&dmac0 3>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@18020000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18020000 0x1000>;
+				interrupts = <0 18 0>;
+				clocks = <&car 88>;
+				fifosize = <32>;
+			};
+
+			uart2: uart@18030000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18030000 0x1000>;
+				interrupts = <0 19 0>;
+				clocks = <&car 91>;
+				fifosize = <128>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart3: uart@18040000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18040000 0x1000>;
+				interrupts = <0 66 0>;
+				clocks = <&car 92>;
+				fifosize = <128>;
+				dmas = <&dmac0 4>, <&dmac0 5>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart4: uart@18050000 {
+				cell-index = <4>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18050000 0x1000>;
+				interrupts = <0 69 0>;
+				clocks = <&car 93>;
+				fifosize = <128>;
+				dmas = <&dmac0 0>, <&dmac0 1>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart5: uart@18060000 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18060000 0x1000>;
+				interrupts = <0 71 0>;
+				clocks = <&car 94>;
+				fifosize = <128>;
+				dmas = <&dmac0 8>, <&dmac0 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			dspub@18250000 {
+				compatible = "dx,cc44p";
+				reg = <0x18250000 0x10000>;
+				interrupts = <0 27 0>;
+			};
+
+			spi1: spi@18200000 {
+				compatible = "sirf,prima2-spi";
+				reg = <0x18200000 0x1000>;
+				interrupts = <0 16 0>;
+				clocks = <&car 95>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmac0 12>, <&dmac0 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+
+		gpum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13000000 0x13000000 0x3000>;
+			gpum@0x13000000 {
+				compatible = "sirf,nocfw-gpum";
+				reg = <0x13000000 0x3000>;
+			};
+		};
+
+		mediam {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x16000000 0x16000000 0x00200000>,
+				<0x17020000 0x17020000 0x1000>,
+				<0x17030000 0x17030000 0x1000>,
+				<0x17040000 0x17040000 0x1000>,
+				<0x17050000 0x17050000 0x10000>,
+				<0x17060000 0x17060000 0x200>,
+				<0x17060200 0x17060200 0x100>,
+				<0x17070000 0x17070000 0x200>,
+				<0x17070200 0x17070200 0x100>,
+				<0x170A0000 0x170A0000 0x3000>;
+
+			mediam@170A0000 {
+				compatible = "sirf,nocfw-mediam";
+				reg = <0x170A0000 0x3000>;
+			};
+
+			gpio_0: gpio_mediam@17040000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x17040000 0x1000>;
+				interrupts = <0 13 0>, <0 14 0>;
+				clocks = <&car 107>;
+				clock-names = "gpio0_io";
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			nand@17050000 {
+				compatible = "sirf,atlas7-nand";
+				reg = <0x17050000 0x10000>;
+				interrupts = <0 41 0>;
+				clocks = <&car 108>, <&car 112>;
+				clock-names = "nand_io", "nand_nand";
+			};
+
+			sd0: sdhci@16000000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x16000000 0x100000>;
+				interrupts = <0 38 0>;
+				clocks = <&car 109>, <&car 111>;
+				clock-names = "core", "iface";
+				wp-inverted;
+				non-removable;
+				status = "disabled";
+				bus-width = <8>;
+			};
+
+			sd1: sdhci@16100000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x16100000 0x100000>;
+				interrupts = <0 38 0>;
+				clocks = <&car 109>, <&car 111>;
+				clock-names = "core", "iface";
+				non-removable;
+				status = "disabled";
+				bus-width = <8>;
+			};
+
+			usb0: usb@17060000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-usb";
+				reg = <0x17060000 0x200>;
+				interrupts = <0 10 0>;
+				clocks = <&car 113>;
+				sirf,usbphy = <&usbphy0>;
+				phy_type = "utmi";
+				dr_mode = "otg";
+				maximum-speed = "high-speed";
+				status = "okay";
+			};
+
+			usb1: usb@17070000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-usb";
+				reg = <0x17070000 0x200>;
+				interrupts = <0 11 0>;
+				clocks = <&car 114>;
+				sirf,usbphy = <&usbphy1>;
+				phy_type = "utmi";
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				status = "okay";
+			};
+
+			usbphy0: usbphy@0 {
+				compatible = "sirf,atlas7-usbphy";
+				reg = <0x17060200 0x100>;
+				clocks = <&car 115>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@1 {
+				compatible = "sirf,atlas7-usbphy";
+				reg = <0x17070200 0x100>;
+				clocks = <&car 116>;
+				status = "okay";
+			};
+
+			i2c0: i2c@17020000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0x17020000 0x1000>;
+				interrupts = <0 24 0>;
+				clocks = <&car 105>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+		};
+
+		vdifm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13290000 0x13290000 0x3000>,
+				<0x13300000 0x13300000 0x1000>,
+				<0x14200000 0x14200000 0x600000>;
+
+			vdifm@13290000 {
+				compatible = "sirf,nocfw-vdifm";
+				reg = <0x13290000 0x3000>;
+			};
+
+			gpio_1: gpio_vdifm@13300000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x13300000 0x1000>;
+				interrupts = <0 43 0>, <0 44 0>, <0 45 0>;
+				clocks = <&car 84>;
+				clock-names = "gpio1_io";
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			sd2: sdhci@14200000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14200000 0x100000>;
+				interrupts = <0 23 0>;
+				clocks = <&car 70>, <&car 75>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+				sd-uhs-sdr50;
+				vqmmc-supply = <&vqmmc>;
+				vqmmc: vqmmc@2 {
+					regulator-min-microvolt = <1650000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-name = "vqmmc-ldo";
+					regulator-type = "voltage";
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+			};
+
+			sd3: sdhci@14300000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14300000 0x100000>;
+				interrupts = <0 23 0>;
+				clocks = <&car 76>, <&car 81>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+
+			sd5: sdhci@14500000 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14500000 0x100000>;
+				interrupts = <0 39 0>;
+				clocks = <&car 71>, <&car 76>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+				loop-dma;
+			};
+
+			sd6: sdhci@14600000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14600000 0x100000>;
+				interrupts = <0 98 0>;
+				clocks = <&car 72>, <&car 77>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+
+			sd7: sdhci@14700000 {
+				cell-index = <7>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14700000 0x100000>;
+				interrupts = <0 98 0>;
+				clocks = <&car 72>, <&car 77>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+		};
+
+		audiom {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10d50000 0x10d50000 0x0000ffff>,
+					<0x10d60000 0x10d60000 0x0000ffff>,
+					<0x10d80000 0x10d80000 0x0000ffff>,
+					<0x10d90000 0x10d90000 0x0000ffff>,
+					<0x10ED0000 0x10ED0000 0x3000>,
+					<0x10dc8000 0x10dc8000 0x1000>,
+					<0x10dc0000 0x10dc0000 0x1000>,
+					<0x10db0000 0x10db0000 0x4000>,
+					<0x10d40000 0x10d40000 0x1000>,
+					<0x10d30000 0x10d30000 0x1000>;
+
+			timer@10dc0000 {
+				compatible = "sirf,atlas7-tick";
+				reg = <0x10dc0000 0x1000>;
+				interrupts = <0 0 0>,
+					   <0 1 0>,
+					   <0 2 0>,
+					   <0 49 0>,
+					   <0 50 0>,
+					   <0 51 0>;
+				clocks = <&car 47>;
+			};
+
+			timerb@10dc8000 {
+					compatible = "sirf,atlas7-tick";
+					reg = <0x10dc8000 0x1000>;
+					interrupts = <0 74 0>,
+							   <0 75 0>,
+							   <0 76 0>,
+							   <0 77 0>,
+							   <0 78 0>,
+							   <0 79 0>;
+					clocks = <&car 47>;
+			};
+
+			vip0@10db0000 {
+				compatible = "sirf,atlas7-vip0";
+				reg = <0x10db0000 0x2000>;
+				interrupts = <0 85 0>;
+				sirf,vip_cma_size = <0xC00000>;
+			};
+
+			cvd@10db2000 {
+				compatible = "sirf,cvd";
+				reg = <0x10db2000 0x2000>;
+				clocks = <&car 46>;
+			};
+
+			dmac2: dma-controller@10d50000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x10d50000 0xffff>;
+				interrupts = <0 55 0>;
+				clocks = <&car 60>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			dmac3: dma-controller@10d60000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x10d60000 0xffff>;
+				interrupts = <0 56 0>;
+				clocks = <&car 61>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			adc: adc@10d80000 {
+				compatible = "sirf,atlas7-adc";
+				reg = <0x10d80000 0xffff>;
+				interrupts = <0 34 0>;
+				clocks = <&car 49>;
+				#io-channel-cells = <1>;
+			};
+
+			pulsec@10d90000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0x10d90000 0xffff>;
+				interrupts = <0 42 0>;
+				clocks = <&car 54>;
+			};
+
+			audiom@10ED0000 {
+				compatible = "sirf,nocfw-audiom";
+				reg = <0x10ED0000 0x3000>;
+				interrupts = <0 102 0>;
+			};
+
+			usp1: usp@10d30000 {
+				cell-index = <1>;
+				reg = <0x10d30000 0x1000>;
+				fifosize = <512>;
+				clocks = <&car 58>;
+				dmas = <&dmac2 6>, <&dmac2 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp2: usp@10d40000 {
+				cell-index = <2>;
+				reg = <0x10d40000 0x1000>;
+				interrupts = <0 22 0>;
+				clocks = <&car 59>;
+				dmas = <&dmac2 12>, <&dmac2 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ddrm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10820000 0x10820000 0x3000>,
+					<0x10800000 0x10800000 0x2000>;
+			ddrm@10820000 {
+				compatible = "sirf,nocfw-ddrm";
+				reg = <0x10820000 0x3000>;
+				interrupts = <0 105 0>;
+			};
+
+			memory-controller@0x10800000 {
+				compatible = "sirf,atlas7-memc";
+				reg = <0x10800000 0x2000>;
+			};
+
+		};
+
+		btm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x11002000 0x11002000 0x0000ffff>,
+			       <0x11010000 0x11010000 0x3000>,
+			       <0x11000000 0x11000000 0x1000>,
+			       <0x11001000 0x11001000 0x1000>;
+
+			dmac4: dma-controller@11002000 {
+				cell-index = <4>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x11002000 0x1000>;
+				interrupts = <0 99 0>;
+				clocks = <&car 130>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+			uart6: uart@11000000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-bt-uart",
+						"sirf,atlas7-uart";
+				reg = <0x11000000 0x1000>;
+				interrupts = <0 100 0>;
+				clocks = <&car 131>, <&car 133>, <&car 134>;
+				clock-names = "uart", "general", "noc";
+				fifosize = <128>;
+				dmas = <&dmac4 12>, <&dmac4 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			usp3: usp@11001000 {
+				compatible = "sirf,atlas7-bt-usp",
+					   "sirf,prima2-usp-pcm";
+				cell-index = <3>;
+				reg = <0x11001000 0x1000>;
+				fifosize = <512>;
+				clocks = <&car 132>, <&car 129>, <&car 133>,
+					<&car 134>, <&car 135>;
+				clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
+					"noc_btm_io", "thbtm_io";
+				dmas = <&dmac4 0>, <&dmac4 1>;
+				dma-names = "rx", "tx";
+			};
+
+			btm@11010000 {
+				compatible = "sirf,nocfw-btm";
+				reg = <0x11010000 0x3000>;
+			};
+		};
+
+		rtcm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18810000 0x18810000 0x3000>,
+				<0x18840000 0x18840000 0x1000>,
+				<0x18890000 0x18890000 0x1000>,
+				<0x188B0000 0x188B0000 0x10000>,
+				<0x188D0000 0x188D0000 0x1000>;
+			rtcm@18810000 {
+				compatible = "sirf,nocfw-rtcm";
+				reg = <0x18810000 0x3000>;
+				interrupts = <0 109 0>;
+			};
+
+			gpio_2: gpio_rtcm@18890000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x18890000 0x1000>;
+				interrupts = <0 47 0>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			rtc-iobg@18840000 {
+				compatible = "sirf,prima2-rtciobg",
+					"sirf-prima2-rtciobg-bus",
+					"simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x18840000 0x1000>;
+
+				sysrtc@2000 {
+					compatible = "sirf,prima2-sysrtc";
+					reg = <0x2000 0x100>;
+					interrupts = <0 52 0>;
+				};
+				pwrc@3000 {
+					compatible = "sirf,atlas7-pwrc";
+					reg = <0x3000 0x100>;
+				};
+			};
+
+			qspi: flash@188B0000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-qspi-nor";
+				reg = <0x188B0000 0x10000>;
+				interrupts = <0 15 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			retain@0x188D0000 {
+				compatible = "sirf,atlas7-retain";
+				reg = <0x188D0000 0x1000>;
+			};
+
+		};
+		disp-iobg {
+			/* lcdc0 */
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13100000 0x13100000 0x20000>,
+				 <0x10e10000 0x10e10000 0x10000>;
+
+			lcd@13100000 {
+				compatible = "sirf,atlas7-lcdc";
+				reg = <0x13100000 0x10000>;
+				interrupts = <0 30 0>;
+				clocks = <&car 79>;
+			};
+			vpp@13110000 {
+				compatible = "sirf,atlas7-vpp";
+				reg = <0x13110000 0x10000>;
+				interrupts = <0 31 0>;
+				clocks = <&car 78>;
+				resets = <&car 29>;
+			};
+			lvds@10e10000 {
+				compatible = "sirf,atlas7-lvdsc";
+				reg = <0x10e10000 0x10000>;
+				interrupts = <0 64 0>;
+				clocks = <&car 54>;
+				resets = <&car 29>;
+			};
+
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x12000000 0x12000000 0x1000000>;
+
+			graphics@12000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x12000000 0x1000000>;
+				interrupts = <0 6 0>;
+				clocks = <&car 126>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/axp209.dtsi

@@ -0,0 +1,97 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+		};
+	};
+};

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -23,11 +23,77 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power1 {
+			label = "bcm53xx:white:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router0 {
+			label = "bcm53xx:blue:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		restart {
 			label = "Reset";

arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts

@@ -0,0 +1,60 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	axi@18000000 {
+		nand@28000 {
+			reg = <0x00028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm/boot/dts/bcm4708-netgear-r6250.dts

@@ -71,7 +71,6 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		wps {
 			label = "WPS";

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -61,7 +61,6 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		wps {
 			label = "WPS";

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -61,7 +61,6 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		restart {
 			label = "Reset";

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -23,11 +23,77 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		aoss {
 			label = "AOSS";

arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts

@@ -0,0 +1,37 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-900DHP (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm/boot/dts/berlin2.dtsi

@@ -104,7 +104,7 @@
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&chip CLKID_TWD>;
 		};
 

arch/arm/boot/dts/berlin2cd.dtsi

@@ -45,6 +45,11 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
@@ -71,7 +76,7 @@
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&chip CLKID_TWD>;
 		};
 

arch/arm/boot/dts/berlin2q.dtsi

@@ -63,6 +63,14 @@
 		ranges = <0 0xf7000000 0x1000000>;
 		interrupt-parent = <&gic>;
 
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
@@ -105,7 +113,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			clocks = <&chip CLKID_TWD>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		gic: interrupt-controller@ad1000 {

arch/arm/boot/dts/cx92755.dtsi

@@ -0,0 +1,113 @@
+/*
+ * Device Tree Include file for the Conexant Digicolor CX92755 SoC
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "cnxt,cx92755";
+
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	main_clk: main_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <200000000>;
+	};
+
+	intc: interrupt-controller@f0000040 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000040 0x40>;
+		syscon = <&uc_regs>;
+	};
+
+	timer@f0000fc0 {
+		compatible = "cnxt,cx92755-timer";
+		reg = <0xf0000fc0 0x40>;
+		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+		clocks = <&main_clk>;
+	};
+
+	uc_regs: syscon@f00003a0 {
+		compatible = "cnxt,cx92755-uc", "syscon";
+		reg = <0xf00003a0 0x10>;
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+		status = "disabled";
+	};
+
+	uart1: uart@f0000760 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000760 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <45>;
+		status = "disabled";
+	};
+
+	uart2: uart@f0000780 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000780 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <46>;
+		status = "disabled";
+	};
+};

arch/arm/boot/dts/cx92755_equinox.dts

@@ -0,0 +1,74 @@
+/*
+ * Device Tree file for the Conexant Equinox CX92755 EVK
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "cx92755.dtsi"
+
+/ {
+	model = "Conexant Equinox CX92755 EVK";
+	compatible = "cnxt,equinox", "cnxt,cx92755";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory@0 {
+		reg = <0 0x8000000>;
+		device_type = "memory";
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm/boot/dts/dm8168-evm.dts

@@ -0,0 +1,129 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm816x.dtsi"
+
+/ {
+	model = "DM8168 EVM";
+	compatible = "ti,dm8168-evm", "ti,dm8168";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000	/* 1 GB */
+		       0xc0000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* FDC6331L controlled by SD_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dm816x_pinmux {
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0)	/* SPI_SCLK */
+			DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0)	/* SPI_SCS0 */
+			DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0)	/* SPI_D0 */
+			DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0)	/* SPI_D1 */
+		>;
+	};
+};
+
+&i2c1 {
+	extgpio0: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c2 {
+	extgpio1: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	m25p80@0 {
+		compatible = "w25x32";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};

arch/arm/boot/dts/dm816x-clocks.dtsi

@@ -0,0 +1,250 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm {
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
+
+	ddr_fapll: ddr_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x440 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>;
+		clock-output-names = "ddr_pll_clk1",
+				     "ddr_pll_clk2",
+				     "ddr_pll_clk3",
+				     "ddr_pll_clk4";
+	};
+
+	video_fapll: video_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x470 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>;
+		clock-output-names = "video_pll_clk1",
+				     "video_pll_clk2",
+				     "video_pll_clk3";
+	};
+
+	audio_fapll: audio_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x4a0 0x30>;
+		clocks = <&main_fapll 7>, < &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>;
+		clock-output-names = "audio_pll_clk1",
+				     "audio_pll_clk2",
+				     "audio_pll_clk3",
+				     "audio_pll_clk4",
+				     "audio_pll_clk5";
+	};
+};
+
+&scrm_clocks {
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+};
+
+/* 0x48180000 */
+&prcm_clocks {
+	clkout_pre_ck: clkout_pre_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
+			  &audio_fapll 1>;
+		reg = <0x100>;
+	};
+
+	clkout_div_ck: clkout_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x100>;
+	};
+
+	clkout_ck: clkout_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x100>;
+	};
+
+	/* CM_DPLL clocks p1795 */
+	sysclk1_ck: sysclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x0300>;
+	};
+
+	sysclk2_ck: sysclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0304>;
+	};
+
+	sysclk3_ck: sysclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 3>;
+		ti,max-div = <7>;
+		reg = <0x0308>;
+	};
+
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,max-div = <1>;
+		reg = <0x030c>;
+	};
+
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclk4_ck>;
+		ti,max-div = <1>;
+		reg = <0x0310>;
+	};
+
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,dividers = <2>, <4>;
+		reg = <0x0314>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&ddr_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0324>;
+	};
+
+	sysclk24_ck: sysclk24_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 5>;
+		ti,max-div = <7>;
+		reg = <0x03b4>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sysclk2_ck>;
+		ti,bit-shift = <1>;
+                reg = <0x15dc>;
+	};
+
+	audio_pll_a_ck: audio_pll_a_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&audio_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x035c>;
+	};
+
+	sysclk18_ck: sysclk18_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
+		reg = <0x0378>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0390>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0394>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0398>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x039c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a0>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a4>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a8>;
+	};
+};

arch/arm/boot/dts/dm816x.dtsi

@@ -0,0 +1,392 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,dm816";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the dm816x interconnect.
+	 * The real dm816x interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap3-l3-smx", "simple-bus";
+		reg = <0x44000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		prcm: prcm@48180000 {
+			compatible = "ti,dm816-prcm";
+			reg = <0x48180000 0x4000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48140000 {
+			compatible = "ti,dm816-scrm", "simple-bus";
+			reg = <0x48140000 0x21000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48140000 0x21000>;
+
+			dm816x_pinmux: pinmux@800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x50a>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xf>;
+			};
+
+			/* Device Configuration Registers */
+			scm_conf: syscon@600 {
+				compatible = "syscon";
+				reg = <0x600 0x110>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
+			reg =   <0x49000000 0x10000>,
+			        <0x44e10f90 0x40>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,816-elm";
+			ti,hwmods = "elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+		};
+
+		gpio1: gpio@48032000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio1";
+			reg = <0x48032000 0x1000>;
+			interrupts = <97>;
+		};
+
+		gpio2: gpio@4804c000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio2";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <99>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <100>;
+			gpmc,num-cs = <6>;
+			gpmc,num-waitpins = <2>;
+		};
+
+		i2c1: i2c@48028000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <70>;
+			dmas = <&edma 58 &edma 59>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <71>;
+			dmas = <&edma 60 &edma 61>;
+			dma-names = "tx", "rx";
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm816-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		mailbox: mailbox@480c8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480c8000 0x2000>;
+			interrupts = <77>;
+			ti,hwmods = "mailbox";
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			mbox_dsp: mbox_dsp {
+				ti,mbox-tx = <3 0 0>;
+				ti,mbox-rx = <0 0 0>;
+			};
+		};
+
+		mdio: mdio@4a100800 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a100800 0x100>;
+			ti,hwmods = "davinci_mdio";
+			bus_freq = <1000000>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <2>;
+			};
+		};
+
+		eth0: ethernet@4a100000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac0";
+			reg = <0x4a100000 0x800
+			       0x4a100900 0x3700>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <40 41 42 43>;
+			phy-handle = <&phy0>;
+		};
+
+		eth1: ethernet@4a120000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac1";
+			reg = <0x4a120000 0x4000>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <44 45 46 47>;
+			phy-handle = <&phy1>;
+		};
+
+		mcspi1: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48030000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <65>;
+			ti,spi-num-cs = <4>;
+			ti,hwmods = "mcspi1";
+			dmas = <&edma 16 &edma 17
+				&edma 18 &edma 19>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x11000>;
+			ti,hwmods = "mmc1";
+			interrupts = <64>;
+			dmas = <&edma 24 &edma 25>;
+			dma-names = "tx", "rx";
+		};
+
+		timer1: timer@4802e000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4802e000 0x2000>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48040000 0x2000>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48042000 0x2000>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48044000 0x2000>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48046000 0x2000>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48048000 0x2000>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4804a000 0x2000>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+		};
+
+		uart1: uart@48020000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart1";
+			reg = <0x48020000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <72>;
+			dmas = <&edma 26 &edma 27>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: uart@48022000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart2";
+			reg = <0x48022000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <73>;
+			dmas = <&edma 28 &edma 29>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: uart@48024000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart3";
+			reg = <0x48024000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <74>;
+			dmas = <&edma 30 &edma 31>;
+			dma-names = "tx", "rx";
+		};
+
+		/* NOTE: USB needs a transceiver driver for phys to work */
+		usb: usb_otg_hs@47401000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47401000 0x400000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401c00 0x400
+				       0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+			};
+		};
+
+		wd_timer2: wd_timer@480c2000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer";
+			reg = <0x480c2000 0x1000>;
+			interrupts = <0>;
+		};
+	};
+};
+
+#include "dm816x-clocks.dtsi"

arch/arm/boot/dts/dra7-evm.dts

@@ -26,6 +26,16 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
@@ -391,6 +401,19 @@
 			};
 		};
 	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 };
 
 &i2c2 {
@@ -520,6 +543,14 @@
 	};
 };
 
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7.dtsi

@@ -1111,7 +1111,6 @@
 					      "wkupclk", "refclk",
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
-				id = <1>;
 				ti,hwmods = "pcie1-phy";
 			};
 
@@ -1132,7 +1131,6 @@
 					      "div-clk", "phy-div";
 				#phy-cells = <0>;
 				ti,hwmods = "pcie2-phy";
-				id = <2>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/dra72-evm.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI DRA722";
@@ -24,6 +25,16 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &dra7_pmx_core {
@@ -121,6 +132,18 @@
 			0x418   (MUX_MODE15)	/* wakeup0.off */
 		>;
 	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			0x78 (PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
+			0x7c (PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
+			0x80 (PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
+			0x84 (PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
+			0x88 (PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -243,6 +266,18 @@
 			ti,palmas-long-press-seconds = <6>;
 		};
 	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };
 
 &uart1 {
@@ -345,6 +380,14 @@
 	phy-supply = <&ldo4_reg>;
 };
 
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";
@@ -461,3 +504,68 @@
 	pinctrl-0 = <&dcan1_pins_default>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
 };
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos3250-monk.dts

@@ -15,6 +15,7 @@
 /dts-v1/;
 #include "exynos3250.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Monk board";
@@ -37,9 +38,7 @@
 		compatible = "gpio-keys";
 
 		power_key {
-			interrupt-parent = <&gpx2>;
-			interrupts = <7 0>;
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
@@ -109,6 +108,13 @@
 			};
 		};
 	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
 };
 
 &adc {
@@ -134,6 +140,17 @@
 	};
 };
 
+&exynos_usbphy {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -420,6 +437,46 @@
 	status = "okay";
 };
 
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
 &xusbxti {
 	clock-frequency = <24000000>;
 };

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -15,6 +15,7 @@
 /dts-v1/;
 #include "exynos3250.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Rinato board";
@@ -37,9 +38,7 @@
 		compatible = "gpio-keys";
 
 		power_key {
-			interrupt-parent = <&gpx2>;
-			interrupts = <7 0>;
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
@@ -100,6 +99,13 @@
 			};
 		};
 	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
 };
 
 &adc {
@@ -125,6 +131,87 @@
 	};
 };
 
+&exynos_usbphy {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo6_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <250000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 0>;
+		te-gpios = <&gpx0 6 0>;
+		power-on-delay= <30>;
+		power-off-delay= <120>;
+		reset-delay = <5>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <29>;
+		panel-height-mm = <29>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <0>;
+				hactive = <320>;
+				vactive = <320>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <150>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+
+	i80-if-timings {
+		cs-setup = <0>;
+		wr-setup = <0>;
+		wr-act = <1>;
+		wr-hold = <0>;
+	};
+};
+
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -523,6 +610,46 @@
 	status = "okay";
 };
 
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
 &xusbxti {
 	clock-frequency = <24000000>;
 };

arch/arm/boot/dts/exynos3250.dtsi

@@ -141,26 +141,31 @@
 		pd_cam: cam-power-domain@10023C00 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C00 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_mfc: mfc-power-domain@10023C40 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C40 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_g3d: g3d-power-domain@10023C60 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C60 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_lcd0: lcd0-power-domain@10023C80 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C80 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_isp: isp-power-domain@10023CA0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023CA0 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		cmu: clock-controller@10030000 {
@@ -235,7 +240,7 @@
 			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
-			samsung,power-domain = <&pd_lcd0>;
+			power-domains = <&pd_lcd0>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -245,7 +250,7 @@
 			reg = <0x11C80000 0x10000>;
 			interrupts = <0 83 0>;
 			samsung,phy-type = <0>;
-			samsung,power-domain = <&pd_lcd0>;
+			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
 			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
@@ -255,6 +260,17 @@
 			status = "disabled";
 		};
 
+		hsotg: hsotg@12480000 {
+			compatible = "snps,dwc2";
+			reg = <0x12480000 0x20000>;
+			interrupts = <0 141 0>;
+			clocks = <&cmu CLK_USBOTG>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
 		mshc_0: mshc@12510000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12510000 0x1000>;
@@ -279,6 +295,16 @@
 			status = "disabled";
 		};
 
+		exynos_usbphy: exynos-usbphy@125B0000 {
+			compatible = "samsung,exynos3250-usb2-phy";
+			reg = <0x125B0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		amba {
 			compatible = "arm,amba-bus";
 			#address-cells = <1>;
@@ -327,7 +353,7 @@
 			interrupts = <0 102 0>;
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
-			samsung,power-domain = <&pd_mfc>;
+			power-domains = <&pd_mfc>;
 			status = "disabled";
 		};
 
@@ -515,6 +541,80 @@
 			compatible = "arm,cortex-a7-pmu";
 			interrupts = <0 18 0>, <0 19 0>;
 		};
+
+		ppmu_dmc0: ppmu_dmc0@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_dmc1: ppmu_dmc1@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_cpu: ppmu_cpu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_rightbus: ppmu_rightbus@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&cmu CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&cmu CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_camif: ppmu_camif@11ac0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11ac0000 0x2000>;
+			clocks = <&cmu CLK_PPMUCAMIF>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_lcd0: ppmu_lcd0@11e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11e40000 0x2000>;
+			clocks = <&cmu CLK_PPMULCD0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_fsys: ppmu_fsys@12630000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12630000 0x2000>;
+			clocks = <&cmu CLK_PPMUFILE>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_g3d: ppmu_g3d@13220000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13220000 0x2000>;
+			clocks = <&cmu CLK_PPMUG3D>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_mfc: ppmu_mfc@13660000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13660000 0x2000>;
+			clocks = <&cmu CLK_PPMUMFC_L>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/exynos4.dtsi

@@ -79,41 +79,49 @@
 		compatible = "samsung,s5pv210-mipi-video-phy";
 		reg = <0x10020710 8>;
 		#phy-cells = <1>;
+		syscon = <&pmu_system_controller>;
 	};
 
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_g3d: g3d-power-domain@10023C60 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C60 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_lcd0: lcd0-power-domain@10023C80 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C80 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_tv: tv-power-domain@10023C20 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C20 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_cam: cam-power-domain@10023C00 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C00 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_gps: gps-power-domain@10023CE0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CE0 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_gps_alive: gps-alive-power-domain@10023D00 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023D00 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	gic: interrupt-controller@10490000 {
@@ -150,7 +158,7 @@
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
@@ -175,7 +183,7 @@
 			interrupts = <0 84 0>;
 			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -186,7 +194,7 @@
 			interrupts = <0 85 0>;
 			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -197,7 +205,7 @@
 			interrupts = <0 86 0>;
 			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -208,7 +216,7 @@
 			interrupts = <0 87 0>;
 			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -220,7 +228,7 @@
 			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			phys = <&mipi_phy 0>;
 			phy-names = "csis";
 			status = "disabled";
@@ -235,7 +243,7 @@
 			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			phys = <&mipi_phy 2>;
 			phy-names = "csis";
 			status = "disabled";
@@ -400,7 +408,7 @@
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
-		samsung,power-domain = <&pd_mfc>;
+		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
 		status = "disabled";
@@ -650,8 +658,116 @@
 		interrupts = <11 0>, <11 1>, <11 2>;
 		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
 		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		samsung,sysreg = <&sys_reg>;
 		status = "disabled";
 	};
+
+	ppmu_dmc0: ppmu_dmc0@106a0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106a0000 0x2000>;
+		clocks = <&clock CLK_PPMUDMC0>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_dmc1: ppmu_dmc1@106b0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106b0000 0x2000>;
+		clocks = <&clock CLK_PPMUDMC1>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_cpu: ppmu_cpu@106c0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106c0000 0x2000>;
+		clocks = <&clock CLK_PPMUCPU>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_acp: ppmu_acp@10ae0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106e0000 0x2000>;
+		status = "disabled";
+	};
+
+	ppmu_rightbus: ppmu_rightbus@112a0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x112a0000 0x2000>;
+		clocks = <&clock CLK_PPMURIGHT>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_leftbus: ppmu_leftbus0@116a0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x116a0000 0x2000>;
+		clocks = <&clock CLK_PPMULEFT>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_camif: ppmu_camif@11ac0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x11ac0000 0x2000>;
+		clocks = <&clock CLK_PPMUCAMIF>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_lcd0: ppmu_lcd0@11e40000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x11e40000 0x2000>;
+		clocks = <&clock CLK_PPMULCD0>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_fsys: ppmu_g3d@12630000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12630000 0x2000>;
+		status = "disabled";
+	};
+
+	ppmu_image: ppmu_image@12aa0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12aa0000 0x2000>;
+		clocks = <&clock CLK_PPMUIMAGE>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_tv: ppmu_tv@12e40000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12e40000 0x2000>;
+		clocks = <&clock CLK_PPMUTV>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_g3d: ppmu_g3d@13220000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x13220000 0x2000>;
+		clocks = <&clock CLK_PPMUG3D>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_mfc_left: ppmu_mfc_left@13660000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x13660000 0x2000>;
+		clocks = <&clock CLK_PPMUMFC_L>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_mfc_right: ppmu_mfc_right@13670000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x13670000 0x2000>;
+		clocks = <&clock CLK_PPMUMFC_R>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos4210-trats.dts

@@ -92,6 +92,7 @@
 	hsotg@12480000 {
 		vusb_d-supply = <&vusb_reg>;
 		vusb_a-supply = <&vusbdac_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -72,6 +72,7 @@
 	hsotg@12480000 {
 		vusb_d-supply = <&ldo3_reg>;
 		vusb_a-supply = <&ldo8_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 

arch/arm/boot/dts/exynos4210.dtsi

@@ -79,6 +79,7 @@
 	pd_lcd1: lcd1-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	l2c: l2-cache-controller@10502000 {
@@ -201,4 +202,12 @@
 			samsung,lcd-wb;
 		};
 	};
+
+	ppmu_lcd1: ppmu_lcd1@12240000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12240000 0x2000>;
+		clocks = <&clock CLK_PPMULCD1>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -402,6 +402,7 @@
 	};
 
 	hsotg@12480000 {
+		dr_mode = "peripheral";
 		status = "okay";
 		vusb_d-supply = <&ldo15_reg>;
 		vusb_a-supply = <&ldo12_reg>;

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -15,6 +15,7 @@
 /dts-v1/;
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
@@ -24,6 +25,7 @@
 		i2c9 = &i2c_ak8975;
 		i2c10 = &i2c_cm36651;
 		i2c11 = &i2c_max77693;
+		i2c12 = &i2c_max77693_fuel;
 	};
 
 	memory {
@@ -57,15 +59,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
-
 		cam_io_reg: voltage-regulator-1 {
 			compatible = "regulator-fixed";
 			regulator-name = "CAM_SENSOR_A";
@@ -93,16 +86,6 @@
 			enable-active-high;
 		};
 
-		cam_isp_core_reg: voltage-regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_ISP_CORE_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpm0 3 0>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
 		ps_als_reg: voltage-regulator-5 {
 			compatible = "regulator-fixed";
 			regulator-name = "LED_A_3.0V";
@@ -204,6 +187,25 @@
 		};
 	};
 
+	i2c@138A0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c4_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		wm1811: wm1811@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+			clocks = <&pmu_system_controller 0>;
+			clock-names = "MCLK1";
+			DCVDD-supply = <&ldo3_reg>;
+			DBVDD1-supply = <&ldo3_reg>;
+			wlf,ldo1ena = <&gpj0 4 0>;
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -226,7 +228,6 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo2_reg: ldo2 {
@@ -235,7 +236,9 @@
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo3_reg: ldo3 {
@@ -244,7 +247,6 @@
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo4_reg: ldo4 {
@@ -253,7 +255,6 @@
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo5_reg: ldo5 {
@@ -262,7 +263,6 @@
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo6_reg: ldo6 {
@@ -271,7 +271,9 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo7_reg: ldo7 {
@@ -280,7 +282,9 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo8_reg: ldo8 {
@@ -288,7 +292,9 @@
 					regulator-name = "VMIPI_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo9_reg: ldo9 {
@@ -296,7 +302,6 @@
 					regulator-name = "CAM_ISP_MIPI_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
 				};
 
 				ldo10_reg: ldo10 {
@@ -304,7 +309,9 @@
 					regulator-name = "VMIPI_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo11_reg: ldo11 {
@@ -313,7 +320,9 @@
 					regulator-min-microvolt = <1950000>;
 					regulator-max-microvolt = <1950000>;
 					regulator-always-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo12_reg: ldo12 {
@@ -321,7 +330,9 @@
 					regulator-name = "VUOTG_3.0V";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo13_reg: ldo13 {
@@ -329,7 +340,6 @@
 					regulator-name = "NFC_AVDD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo14_reg: ldo14 {
@@ -338,7 +348,9 @@
 					regulator-min-microvolt = <1950000>;
 					regulator-max-microvolt = <1950000>;
 					regulator-always-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo15_reg: ldo15 {
@@ -346,7 +358,9 @@
 					regulator-name = "VHSIC_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo16_reg: ldo16 {
@@ -354,7 +368,9 @@
 					regulator-name = "VHSIC_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo17_reg: ldo17 {
@@ -362,7 +378,6 @@
 					regulator-name = "CAM_SENSOR_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
 				};
 
 				ldo18_reg: ldo18 {
@@ -370,7 +385,6 @@
 					regulator-name = "CAM_ISP_SEN_IO_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo19_reg: ldo19 {
@@ -378,7 +392,6 @@
 					regulator-name = "VT_CAM_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo20_reg: ldo20 {
@@ -386,7 +399,6 @@
 					regulator-name = "VDDQ_PRE_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo21_reg: ldo21 {
@@ -394,7 +406,7 @@
 					regulator-name = "VTF_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
+					maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 				};
 
 				ldo22_reg: ldo22 {
@@ -402,6 +414,7 @@
 					regulator-name = "VMEM_VDD_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
+					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 				};
 
 				ldo23_reg: ldo23 {
@@ -409,7 +422,6 @@
 					regulator-name = "TSP_AVDD_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-mem-idle;
 				};
 
 				ldo24_reg: ldo24 {
@@ -417,7 +429,6 @@
 					regulator-name = "TSP_VDD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo25_reg: ldo25 {
@@ -425,7 +436,6 @@
 					regulator-name = "LCD_VCC_3.3V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
 				};
 
 				ldo26_reg: ldo26 {
@@ -433,7 +443,6 @@
 					regulator-name = "MOTOR_VCC_3.0V";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					regulator-mem-idle;
 				};
 
 				buck1_reg: buck1 {
@@ -443,7 +452,9 @@
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck2_reg: buck2 {
@@ -453,7 +464,9 @@
 					regulator-max-microvolt = <1500000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				buck3_reg: buck3 {
@@ -463,7 +476,9 @@
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck4_reg: buck4 {
@@ -472,7 +487,9 @@
 					regulator-min-microvolt = <850000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck5_reg: buck5 {
@@ -504,6 +521,7 @@
 					regulator-name = "VMEM_VDDF_3.0V";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
+					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 				};
 
 				buck9_reg: buck9 {
@@ -511,7 +529,7 @@
 					regulator-name = "CAM_ISP_CORE_1.2V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-off;
+					maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 				};
 			};
 		};
@@ -550,6 +568,32 @@
 				haptic-supply = <&ldo26_reg>;
 				pwms = <&pwm 0 38022 0>;
 			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693-fuel-gauge@36 {
+			compatible = "maxim,max17047";
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			reg = <0x36>;
 		};
 	};
 
@@ -558,7 +602,7 @@
 		broken-cd;
 		non-removable;
 		card-detect-delay = <200>;
-		vmmc-supply = <&vemmc_reg>;
+		vmmc-supply = <&ldo22_reg>;
 		clock-frequency = <400000000>;
 		samsung,dw-mshc-ciu-div = <0>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -722,8 +766,8 @@
 		status = "okay";
 		assigned-clocks = <&clock CLK_MOUT_CAM0>,
 				  <&clock CLK_MOUT_CAM1>;
-		assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>,
-					 <&clock CLK_MOUT_MPLL_USER_T>;
+		assigned-clock-parents = <&clock CLK_XUSBXTI>,
+					 <&clock CLK_XUSBXTI>;
 
 		fimc_0: fimc@11800000 {
 			status = "okay";
@@ -839,6 +883,24 @@
 		};
 	};
 
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	sound {
+		compatible = "samsung,trats2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,model = "Trats2";
+		samsung,audio-codec = <&wm1811>;
+		samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+	};
+
 	exynos-usbphy@125B0000 {
 		status = "okay";
 	};
@@ -846,6 +908,7 @@
 	hsotg@12480000 {
 		vusb_d-supply = <&ldo15_reg>;
 		vusb_a-supply = <&ldo12_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 
@@ -866,6 +929,51 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+};
+
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
 &pinctrl_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;

arch/arm/boot/dts/exynos4415.dtsi

@@ -131,36 +131,43 @@
 		pd_cam: cam-power-domain@10024000 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024000 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_tv: tv-power-domain@10024020 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024020 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_mfc: mfc-power-domain@10024040 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024040 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_g3d: g3d-power-domain@10024060 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024060 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_lcd0: lcd0-power-domain@10024080 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024080 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_isp0: isp0-power-domain@100240A0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x100240A0 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_isp1: isp1-power-domain@100240E0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x100240E0 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		cmu: clock-controller@10030000 {
@@ -234,6 +241,33 @@
 			interrupts = <0 240 0>;
 		};
 
+		fimd: fimd@11C00000 {
+			compatible = "samsung,exynos4415-fimd";
+			reg = <0x11C00000 0x30000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
+			clock-names = "sclk_fimd", "fimd";
+			samsung,power-domain = <&pd_lcd0>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dsi_0: dsi@11C80000 {
+			compatible = "samsung,exynos4415-mipi-dsi";
+			reg = <0x11C80000 0x10000>;
+			interrupts = <0 83 0>;
+			samsung,phy-type = <0>;
+			samsung,power-domain = <&pd_lcd0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		hsotg: hsotg@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;

arch/arm/boot/dts/exynos4x12.dtsi

@@ -52,6 +52,7 @@
 	pd_isp: isp-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	l2c: l2-cache-controller@10502000 {
@@ -209,7 +210,7 @@
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x12390000 0x1000>;
 			interrupts = <0 105 0>;
-			samsung,power-domain = <&pd_isp>;
+			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
 			status = "disabled";
@@ -219,7 +220,7 @@
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x123A0000 0x1000>;
 			interrupts = <0 106 0>;
-			samsung,power-domain = <&pd_isp>;
+			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
 			status = "disabled";
@@ -229,7 +230,7 @@
 			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
 			reg = <0x12000000 0x260000>;
 			interrupts = <0 90 0>, <0 95 0>;
-			samsung,power-domain = <&pd_isp>;
+			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>,
 				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
 				 <&clock CLK_PPMUISPMX>,
@@ -239,7 +240,7 @@
 				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
 				 <&clock CLK_DIV_MCUISP0>,
 				 <&clock CLK_DIV_MCUISP1>,
-				 <&clock CLK_SCLK_UART_ISP>,
+				 <&clock CLK_UART_ISP_SCLK>,
 				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
 				 <&clock CLK_ACLK400_MCUISP>,
 				 <&clock CLK_DIV_ACLK400_MCUISP>;

arch/arm/boot/dts/exynos5250-snow.dts

@@ -33,6 +33,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
 
 		power {
 			label = "Power";
@@ -540,6 +542,13 @@
 };
 
 &pinctrl_0 {
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <0>;
@@ -575,6 +584,13 @@
 		samsung,pin-drv = <0>;
 	};
 
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <0>;

arch/arm/boot/dts/exynos5250.dtsi

@@ -93,11 +93,13 @@
 	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_mfc: mfc-power-domain@10044040 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044040 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	clock: clock-controller@10010000 {
@@ -222,7 +224,7 @@
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
-		samsung,power-domain = <&pd_mfc>;
+		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 	};
@@ -682,7 +684,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
@@ -691,7 +693,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 	};
@@ -700,7 +702,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
 	};
@@ -709,7 +711,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
 	};

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5420.dtsi"
 
 / {
@@ -53,7 +54,7 @@
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
+		pinctrl-0 = <&power_key_irq &lid_irq>;
 
 		power {
 			label = "Power";
@@ -61,6 +62,15 @@
 			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
 	};
 
 	memory {
@@ -192,6 +202,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck2_reg: BUCK2 {
@@ -201,6 +214,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck3_reg: BUCK3 {
@@ -210,6 +226,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck4_reg: BUCK4 {
@@ -219,6 +238,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck5_reg: BUCK5 {
@@ -227,6 +249,9 @@
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck6_reg: BUCK6 {
@@ -236,6 +261,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck7_reg: BUCK7 {
@@ -244,6 +272,9 @@
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			buck8_reg: BUCK8 {
@@ -252,6 +283,9 @@
 				regulator-max-microvolt = <2850000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck9_reg: BUCK9 {
@@ -260,6 +294,9 @@
 				regulator-max-microvolt = <2000000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			buck10_reg: BUCK10 {
@@ -268,6 +305,9 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			ldo1_reg: LDO1 {
@@ -275,6 +315,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo2_reg: LDO2 {
@@ -288,6 +332,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			vqmmc_sdcard: ldo4_reg: LDO4 {
@@ -295,6 +343,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo5_reg: LDO5 {
@@ -302,6 +353,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo6_reg: LDO6 {
@@ -309,6 +363,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo7_reg: LDO7 {
@@ -322,6 +379,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo9_reg: LDO9 {
@@ -329,6 +389,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo10_reg: LDO10 {
@@ -336,6 +400,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo11_reg: LDO11 {
@@ -343,6 +410,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo12_reg: LDO12 {
@@ -350,6 +421,9 @@
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo13_reg: LDO13 {
@@ -357,6 +431,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo14_reg: LDO14 {
@@ -364,6 +442,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo15_reg: LDO15 {
@@ -371,6 +452,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo17_reg: LDO17 {
@@ -378,6 +462,9 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo18_reg: LDO18 {
@@ -451,6 +538,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo32_reg: LDO32 {
@@ -658,6 +748,13 @@
 		samsung,pin-drv = <0>;
 	};
 
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <0>;
@@ -815,6 +912,7 @@
 					};
 					tps65090_fet5: fet5 {
 						regulator-name = "camout";
+						regulator-always-on;
 					};
 					tps65090_fet6: fet6 {
 						regulator-name = "lcd_vdd";