uio_mf624: Refactor memory info initialization

No functional changes. Move initialization of struct uio_mem to a
function. This will allow the next commit to change the initialization
code at a single place rather that at three different places.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/uio/uio_mf624.c

@@ -127,6 +127,20 @@ static int mf624_irqcontrol(struct uio_info *info, s32 irq_on)
 	return 0;
 }
 
+static int mf624_setup_mem(struct pci_dev *dev, int bar, struct uio_mem *mem, const char *name)
+{
+	mem->name = name;
+	mem->addr = pci_resource_start(dev, bar);
+	if (!mem->addr)
+		return -ENODEV;
+	mem->size = pci_resource_len(dev, bar);
+	mem->memtype = UIO_MEM_PHYS;
+	mem->internal_addr = pci_ioremap_bar(dev, bar);
+	if (!mem->internal_addr)
+		return -ENODEV;
+	return 0;
+}
+
 static int mf624_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct uio_info *info;
@@ -147,37 +161,15 @@ static int mf624_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Note: Datasheet says device uses BAR0, BAR1, BAR2 -- do not trust it */
 
 	/* BAR0 */
-	info->mem[0].name = "PCI chipset, interrupts, status "
-			"bits, special functions";
-	info->mem[0].addr = pci_resource_start(dev, 0);
-	if (!info->mem[0].addr)
+	if (mf624_setup_mem(dev, 0, &info->mem[0], "PCI chipset, interrupts, status "
+			    "bits, special functions"))
 		goto out_release;
-	info->mem[0].size = pci_resource_len(dev, 0);
-	info->mem[0].memtype = UIO_MEM_PHYS;
-	info->mem[0].internal_addr = pci_ioremap_bar(dev, 0);
-	if (!info->mem[0].internal_addr)
-		goto out_release;
-
 	/* BAR2 */
-	info->mem[1].name = "ADC, DAC, DIO";
-	info->mem[1].addr = pci_resource_start(dev, 2);
-	if (!info->mem[1].addr)
-		goto out_unmap0;
-	info->mem[1].size = pci_resource_len(dev, 2);
-	info->mem[1].memtype = UIO_MEM_PHYS;
-	info->mem[1].internal_addr = pci_ioremap_bar(dev, 2);
-	if (!info->mem[1].internal_addr)
+	if (mf624_setup_mem(dev, 2, &info->mem[1], "ADC, DAC, DIO"))
 		goto out_unmap0;
 
 	/* BAR4 */
-	info->mem[2].name = "Counter/timer chip";
-	info->mem[2].addr = pci_resource_start(dev, 4);
-	if (!info->mem[2].addr)
-		goto out_unmap1;
-	info->mem[2].size = pci_resource_len(dev, 4);
-	info->mem[2].memtype = UIO_MEM_PHYS;
-	info->mem[2].internal_addr = pci_ioremap_bar(dev, 4);
-	if (!info->mem[2].internal_addr)
+	if (mf624_setup_mem(dev, 4, &info->mem[2], "Counter/timer chip"))
 		goto out_unmap1;
 
 	info->irq = dev->irq;