Merge branch 'sched/urgent' into sched/core

Pick up fixes before queueing up new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/ABI/testing/sysfs-tty

@@ -3,8 +3,7 @@ Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
 		 Shows the list of currently configured
-		 tty devices used for the console,
-		 like 'tty1 ttyS0'.
+		 console devices, like 'tty1 ttyS0'.
 		 The last entry in the file is the active
 		 device connected to /dev/console.
 		 The file supports poll() to detect virtual

Documentation/device-mapper/cache.txt

@@ -124,12 +124,11 @@ the default being 204800 sectors (or 100MB).
 Updating on-disk metadata
 -------------------------
 
-On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
-written.  If no such requests are made then commits will occur every
-second.  This means the cache behaves like a physical disk that has a
-write cache (the same is true of the thin-provisioning target).  If
-power is lost you may lose some recent writes.  The metadata should
-always be consistent in spite of any crash.
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the cache behaves like a physical disk that has a volatile write
+cache.  If power is lost you may lose some recent writes.  The metadata
+should always be consistent in spite of any crash.
 
 The 'dirty' state for a cache block changes far too frequently for us
 to keep updating it on the fly.  So we treat it as a hint.  In normal

Documentation/device-mapper/thin-provisioning.txt

@@ -116,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
 userspace daemon can use this to detect a situation where a new table
 already exceeds the threshold.
 
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache.  If power is lost you may lose some recent
+writes.  The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space).  If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation.  Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed.  It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted.  Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
 Thin provisioning
 -----------------
 
@@ -258,10 +287,9 @@ ii) Status
 	should register for the event and then check the target's status.
 
     held metadata root:
-	The location, in sectors, of the metadata root that has been
+	The location, in blocks, of the metadata root that has been
 	'held' for userspace read access.  '-' indicates there is no
-	held root.  This feature is not yet implemented so '-' is
-	always returned.
+	held root.
 
     discard_passdown|no_discard_passdown
 	Whether or not discards are actually being passed down to the

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -91,7 +91,7 @@ Boards:
   compatible = "ti,omap3-beagle", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
   compatible = "ti,omap4-sdp", "ti,omap4430"

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -21,9 +21,9 @@ Required Properties:
     must appear in the same order as the output clocks.
   - #clock-cells: Must be 1
   - clock-output-names: The name of the clocks as free-form strings
-  - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+  - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
 
-The clocks, clock-output-names and renesas,indices properties contain one
+The clocks, clock-output-names and renesas,clock-indices properties contain one
 entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
 gate clocks must not be declared.
 

Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

@@ -1,12 +1,16 @@
 * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
 
 Required properties:
-- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
-  "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
-  "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
-  "fsl,imx6q-sdma". The -to variants should be preferred since they
-  allow to determnine the correct ROM script addresses needed for
-  the driver to work without additional firmware.
+- compatible : Should be one of
+      "fsl,imx25-sdma"
+      "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+      "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+      "fsl,imx51-sdma"
+      "fsl,imx53-sdma"
+      "fsl,imx6q-sdma"
+  The -to variants should be preferred since they allow to determnine the
+  correct ROM script addresses needed for the driver to work without additional
+  firmware.
 - reg : Should contain SDMA registers location and length
 - interrupts : Should contain SDMA interrupt
 - #dma-cells : Must be <3>.

Documentation/devicetree/bindings/net/opencores-ethoc.txt

@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+  first region is for the device registers and descriptor rings,
+  second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+	enet0: ethoc@fd030000 {
+		compatible = "opencores,ethoc";
+		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+		interrupts = <1>;
+		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
+        };

Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt → Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
 
 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
 
 Required Properties:
 
-- compatible:	Must be "brcm,capri-pinctrl".
+- compatible:	Must be "brcm,bcm11351-pinctrl"
 - reg:		Base address of the PAD Controller register block and the size
 		of the block.
 
 For example, the following is the bare minimum node:
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
 Example:
 // pin controller node
 pinctrl@35004800 {
-	compatible = "brcm,capri-pinctrl";
+	compatible = "brcmbcm11351-pinctrl";
 	reg = <0x35004800 0x430>;
 
 	// pin configuration node

Documentation/networking/can.txt

@@ -554,12 +554,6 @@ solution for a couple of reasons:
   not specified in the struct can_frame and therefore it is only valid in
   CANFD_MTU sized CAN FD frames.
 
-  As long as the payload length is <=8 the received CAN frames from CAN FD
-  capable CAN devices can be received and read by legacy sockets too. When
-  user-generated CAN FD frames have a payload length <=8 these can be send
-  by legacy CAN network interfaces too. Sending CAN FD frames with payload
-  length > 8 to a legacy CAN network interface returns an -EMSGSIZE error.
-
   Implementation hint for new CAN applications:
 
   To build a CAN FD aware application use struct canfd_frame as basic CAN

MAINTAINERS

@@ -73,7 +73,8 @@ Descriptions of section entries:
 	L: Mailing list that is relevant to this area
 	W: Web-page with status/info
 	Q: Patchwork web based patch tracking system site
-	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit, topgit.
+	T: SCM tree type and location.
+	   Type is one of: git, hg, quilt, stgit, topgit
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -473,7 +474,7 @@ F:	net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
 M:	David Airlie <airlied@linux.ie>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T:	git git://people.freedesktop.org/~airlied/linux (part of drm maint)
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
@@ -538,7 +539,7 @@ F:	arch/alpha/
 ALTERA UART/JTAG UART SERIAL DRIVERS
 M:	Tobias Klauser <tklauser@distanz.ch>
 L:	linux-serial@vger.kernel.org
-L:	nios2-dev@sopc.et.ntust.edu.tw (moderated for non-subscribers)
+L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/tty/serial/altera_uart.c
 F:	drivers/tty/serial/altera_jtaguart.c
@@ -1612,11 +1613,11 @@ S:	Maintained
 F:	drivers/net/wireless/atmel*
 
 ATTO EXPRESSSAS SAS/SATA RAID SCSI DRIVER
-M:      Bradley Grove <linuxdrivers@attotech.com>
-L:      linux-scsi@vger.kernel.org
-W:      http://www.attotech.com
-S:      Supported
-F:      drivers/scsi/esas2r
+M:	Bradley Grove <linuxdrivers@attotech.com>
+L:	linux-scsi@vger.kernel.org
+W:	http://www.attotech.com
+S:	Supported
+F:	drivers/scsi/esas2r
 
 AUDIT SUBSYSTEM
 M:	Eric Paris <eparis@redhat.com>
@@ -1737,6 +1738,7 @@ F:	include/uapi/linux/bfs_fs.h
 BLACKFIN ARCHITECTURE
 M:	Steven Miao <realmz6@gmail.com>
 L:	adi-buildroot-devel@lists.sourceforge.net
+T:	git git://git.code.sf.net/p/adi-linux/code
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
@@ -1860,6 +1862,7 @@ F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
+M:	Matt Porter <mporter@linaro.org>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://git.github.com/broadcom/bcm11351
 S:	Maintained
@@ -2158,7 +2161,7 @@ F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
 M:	Peter Chen <Peter.Chen@freescale.com>
-T:	git://github.com/hzpeterchen/linux-usb.git
+T:	git git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -2178,9 +2181,9 @@ S:	Supported
 F:	drivers/net/ethernet/cisco/enic/
 
 CISCO VIC LOW LATENCY NIC DRIVER
-M:      Upinder Malhi <umalhi@cisco.com>
-S:      Supported
-F:      drivers/infiniband/hw/usnic
+M:	Upinder Malhi <umalhi@cisco.com>
+S:	Supported
+F:	drivers/infiniband/hw/usnic
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
@@ -2377,20 +2380,20 @@ F:	drivers/cpufreq/arm_big_little.c
 F:	drivers/cpufreq/arm_big_little_dt.c
 
 CPUIDLE DRIVER - ARM BIG LITTLE
-M:      Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-M:      Daniel Lezcano <daniel.lezcano@linaro.org>
-L:      linux-pm@vger.kernel.org
-L:      linux-arm-kernel@lists.infradead.org
-T:      git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
-S:      Maintained
-F:      drivers/cpuidle/cpuidle-big_little.c
+M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:	Daniel Lezcano <daniel.lezcano@linaro.org>
+L:	linux-pm@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S:	Maintained
+F:	drivers/cpuidle/cpuidle-big_little.c
 
 CPUIDLE DRIVERS
 M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/*
 F:	include/linux/cpuidle.h
 
@@ -2457,9 +2460,9 @@ S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CW1200 WLAN driver
-M:     Solomon Peachy <pizza@shaftnet.org>
-S:     Maintained
-F:     drivers/net/wireless/cw1200/
+M:	Solomon Peachy <pizza@shaftnet.org>
+S:	Maintained
+F:	drivers/net/wireless/cw1200/
 
 CX18 VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
@@ -2610,9 +2613,9 @@ DC395x SCSI driver
 M:	Oliver Neukum <oliver@neukum.org>
 M:	Ali Akcaagac <aliakc@web.de>
 M:	Jamie Lenehan <lenehan@twibble.org>
-W:	http://twibble.org/dist/dc395x/
 L:	dc395x@twibble.org
-L:	http://lists.twibble.org/mailman/listinfo/dc395x/
+W:	http://twibble.org/dist/dc395x/
+W:	http://lists.twibble.org/mailman/listinfo/dc395x/
 S:	Maintained
 F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
@@ -2847,12 +2850,22 @@ F:	lib/kobj*
 DRM DRIVERS
 M:	David Airlie <airlied@linux.ie>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T:	git git://people.freedesktop.org/~airlied/linux
 S:	Maintained
 F:	drivers/gpu/drm/
 F:	include/drm/
 F:	include/uapi/drm/
 
+RADEON DRM DRIVERS
+M:	Alex Deucher <alexander.deucher@amd.com>
+M:	Christian König <christian.koenig@amd.com>
+L:	dri-devel@lists.freedesktop.org
+T:	git git://people.freedesktop.org/~agd5f/linux
+S:	Supported
+F:	drivers/gpu/drm/radeon/
+F:	include/drm/radeon*
+F:	include/uapi/drm/radeon*
+
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
 M:	Jani Nikula <jani.nikula@linux.intel.com>
@@ -3084,6 +3097,8 @@ F:	fs/ecryptfs/
 
 EDAC-CORE
 M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <bp@alien8.de>
+M:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -4547,6 +4562,7 @@ F:	Documentation/networking/ixgbevf.txt
 F:	Documentation/networking/i40e.txt
 F:	Documentation/networking/i40evf.txt
 F:	drivers/net/ethernet/intel/
+F:	drivers/net/ethernet/intel/*/
 
 INTEL-MID GPIO DRIVER
 M:	David Cohen <david.a.cohen@linux.intel.com>
@@ -4903,7 +4919,7 @@ F:	drivers/staging/ktap/
 KCONFIG
 M:	"Yann E. MORIN" <yann.morin.1998@free.fr>
 L:	linux-kbuild@vger.kernel.org
-T:	git://gitorious.org/linux-kconfig/linux-kconfig
+T:	git git://gitorious.org/linux-kconfig/linux-kconfig
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
@@ -5460,11 +5476,11 @@ S:	Maintained
 F:	drivers/media/tuners/m88ts2022*
 
 MA901 MASTERKIT USB FM RADIO DRIVER
-M:      Alexey Klimov <klimov.linux@gmail.com>
-L:      linux-media@vger.kernel.org
-T:      git git://linuxtv.org/media_tree.git
-S:      Maintained
-F:      drivers/media/radio/radio-ma901.c
+M:	Alexey Klimov <klimov.linux@gmail.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
@@ -5500,6 +5516,11 @@ W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
+MARVELL ARMADA DRM SUPPORT
+M:	Russell King <rmk+kernel@arm.linux.org.uk>
+S:	Maintained
+F:	drivers/gpu/drm/armada/
+
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
 M:	Stephen Hemminger <stephen@networkplumber.org>
@@ -5620,7 +5641,7 @@ F:	drivers/scsi/megaraid/
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
 M:	Amir Vadai <amirv@mellanox.com>
-L: 	netdev@vger.kernel.org
+L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
@@ -5661,7 +5682,7 @@ F:	include/linux/mtd/
 F:	include/uapi/mtd/
 
 MEN A21 WATCHDOG DRIVER
-M:  	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <johannes.thumshirn@men.de>
 L:	linux-watchdog@vger.kernel.org
 S:	Supported
 F:	drivers/watchdog/mena21_wdt.c
@@ -5717,20 +5738,20 @@ L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git://openfabrics.org/~eli/connect-ib.git
+T:	git git://openfabrics.org/~eli/connect-ib.git
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
 
 Mellanox MLX5 IB driver
-M:      Eli Cohen <eli@mellanox.com>
-L:      linux-rdma@vger.kernel.org
-W:      http://www.mellanox.com
-Q:      http://patchwork.kernel.org/project/linux-rdma/list/
-T:      git://openfabrics.org/~eli/connect-ib.git
-S:      Supported
-F:      include/linux/mlx5/
-F:      drivers/infiniband/hw/mlx5/
+M:	Eli Cohen <eli@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+W:	http://www.mellanox.com
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+T:	git git://openfabrics.org/~eli/connect-ib.git
+S:	Supported
+F:	include/linux/mlx5/
+F:	drivers/infiniband/hw/mlx5/
 
 MODULE SUPPORT
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -6155,6 +6176,12 @@ S:	Supported
 F:	drivers/block/nvme*
 F:	include/linux/nvme.h
 
+NXP TDA998X DRM DRIVER
+M:	Russell King <rmk+kernel@arm.linux.org.uk>
+S:	Supported
+F:	drivers/gpu/drm/i2c/tda998x_drv.c
+F:	include/drm/i2c/tda998x.h
+
 OMAP SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
@@ -8442,8 +8469,8 @@ TARGET SUBSYSTEM
 M:	Nicholas A. Bellinger <nab@linux-iscsi.org>
 L:	linux-scsi@vger.kernel.org
 L:	target-devel@vger.kernel.org
-L:	http://groups.google.com/group/linux-iscsi-target-dev
 W:	http://www.linux-iscsi.org
+W:	http://groups.google.com/group/linux-iscsi-target-dev
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 S:	Supported
 F:	drivers/target/
@@ -8684,17 +8711,17 @@ S:	Maintained
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
-M:      Zhang Rui <rui.zhang@intel.com>
-M:      Eduardo Valentin <eduardo.valentin@ti.com>
-L:      linux-pm@vger.kernel.org
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
-Q:      https://patchwork.kernel.org/project/linux-pm/list/
-S:      Supported
-F:      drivers/thermal/
-F:      include/linux/thermal.h
-F:      include/linux/cpu_cooling.h
-F:      Documentation/devicetree/bindings/thermal/
+M:	Zhang Rui <rui.zhang@intel.com>
+M:	Eduardo Valentin <eduardo.valentin@ti.com>
+L:	linux-pm@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
+Q:	https://patchwork.kernel.org/project/linux-pm/list/
+S:	Supported
+F:	drivers/thermal/
+F:	include/linux/thermal.h
+F:	include/linux/cpu_cooling.h
+F:	Documentation/devicetree/bindings/thermal/
 
 THINGM BLINK(1) USB RGB LED DRIVER
 M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
@@ -9728,7 +9755,6 @@ F:	drivers/xen/*swiotlb*
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
 M:	Dave Chinner <david@fromorbit.com>
-M:	Ben Myers <bpm@sgi.com>
 M:	xfs@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
@@ -9797,7 +9823,7 @@ ZR36067 VIDEO FOR LINUX DRIVER
 L:	mjpeg-users@lists.sourceforge.net
 L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+T:	hg http://linuxtv.org/hg/v4l-dvb
 S:	Odd Fixes
 F:	drivers/media/pci/zoran/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*
@@ -605,10 +605,11 @@ endif
 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
   stackp-flag := -fstack-protector
   ifeq ($(call cc-option, $(stackp-flag)),)
-    $(warning Cannot use CONFIG_CC_STACKPROTECTOR: \
-	      -fstack-protector not supported by compiler))
+    $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
+             -fstack-protector not supported by compiler)
   endif
-else ifdef CONFIG_CC_STACKPROTECTOR_STRONG
+else
+ifdef CONFIG_CC_STACKPROTECTOR_STRONG
   stackp-flag := -fstack-protector-strong
   ifeq ($(call cc-option, $(stackp-flag)),)
     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
@@ -618,6 +619,7 @@ else
   # Force off for distro compilers that enable stack protector by default.
   stackp-flag := $(call cc-option, -fno-stack-protector)
 endif
+endif
 KBUILD_CFLAGS += $(stackp-flag)
 
 # This warning generated too much noise in a regular build.

arch/arc/mm/cache_arc700.c

@@ -282,7 +282,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 #else
 	/* if V-P const for loop, PTAG can be written once outside loop */
 	if (full_page_op)
-		write_aux_reg(ARC_REG_DC_PTAG, paddr);
+		write_aux_reg(aux_tag, paddr);
 #endif
 
 	while (num_lines-- > 0) {
@@ -296,7 +296,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 		write_aux_reg(aux_cmd, vaddr);
 		vaddr += L1_CACHE_BYTES;
 #else
-		write_aux_reg(aux, paddr);
+		write_aux_reg(aux_cmd, paddr);
 		paddr += L1_CACHE_BYTES;
 #endif
 	}

arch/arm/Kconfig

@@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF
 
 choice
 	prompt "Memory split"
+	depends on MMU
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -1595,6 +1596,7 @@ endchoice
 
 config PAGE_OFFSET
 	hex
+	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
 	default 0xC0000000
@@ -1903,6 +1905,7 @@ config XEN
 	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
+	depends on MMU
 	select ARM_PSCI
 	select SWIOTLB_XEN
 	select ARCH_DMA_ADDR_T_64BIT

arch/arm/boot/compressed/.gitignore

@@ -1,4 +1,5 @@
 ashldi3.S
+bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S

arch/arm/boot/dts/Makefile

@@ -209,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
-	omap3-tobi.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-overo-storm-tobi.dtb \
 	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \

arch/arm/boot/dts/am335x-evmsk.dts

@@ -121,7 +121,7 @@
 		ti,model = "AM335x-EVMSK";
 		ti,audio-codec = <&tlv320aic3106>;
 		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24576000>;
+		ti,codec-clock-rate = <24000000>;
 		ti,audio-routing =
 			"Headphone Jack",       "HPLOUT",
 			"Headphone Jack",       "HPROUT";
@@ -256,6 +256,12 @@
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -456,6 +462,9 @@
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -23,6 +23,7 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		eth3 = &eth3;
 	};
 
 	cpus {
@@ -291,7 +292,7 @@
 				interrupts = <91>;
 			};
 
-			ethernet@34000 {
+			eth3: ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;

arch/arm/boot/dts/bcm11351.dtsi

@@ -147,7 +147,7 @@
 	};
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 

arch/arm/boot/dts/dove.dtsi

@@ -379,15 +379,6 @@
 				#clock-cells = <1>;
 			};
 
-			pmu_intc: pmu-interrupt-ctrl@d0050 {
-				compatible = "marvell,dove-pmu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd0050 0x8>;
-				interrupts = <33>;
-				marvell,#interrupts = <7>;
-			};
-
 			pinctrl: pin-ctrl@d0200 {
 				compatible = "marvell,dove-pinctrl";
 				reg = <0xd0200 0x10>;
@@ -610,8 +601,6 @@
 			rtc: real-time-clock@d8500 {
 				compatible = "marvell,orion-rtc";
 				reg = <0xd8500 0x20>;
-				interrupt-parent = <&pmu_intc>;
-				interrupts = <5>;
 			};
 
 			gpio2: gpio-ctrl@e8400 {

arch/arm/boot/dts/keystone-clocks.dtsi

@@ -612,7 +612,7 @@ clocks {
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
 		clock-output-names = "vcp-3";
-		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
 		reg-names = "control", "domain";
 		domain-id = <24>;
 	};

arch/arm/boot/dts/omap3-gta04.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3";
+	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -32,7 +32,7 @@
 		aux-button {
 			label = "aux";
 			linux,code = <169>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			gpio-key,wakeup;
 		};
 	};
@@ -92,6 +92,8 @@
 	bmp085@77 {
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 	};
 
 	/* leds */
@@ -141,8 +143,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
 	bus-width = <4>;
+	ti,non-removable;
 };
 
 &mmc2 {

arch/arm/boot/dts/omap3-igep0020.dts

@@ -14,7 +14,7 @@
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/omap3-igep0030.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/omap3-n9.dts

@@ -14,5 +14,5 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
 };

arch/arm/boot/dts/omap3-n900.dts

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 (or later) as
@@ -13,7 +13,7 @@
 
 / {
 	model = "Nokia N900";
-	compatible = "nokia,omap3-n900", "ti,omap3";
+	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-n950.dts

@@ -14,5 +14,5 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
 };

arch/arm/boot/dts/omap3-overo-storm-tobi.dts

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+

arch/arm/boot/dts/omap3-tobi.dts → arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -13,9 +13,6 @@
 #include "omap3-overo.dtsi"
 
 / {
-	model = "TI OMAP3 Gumstix Overo on Tobi";
-	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
 	leds {
 		compatible = "gpio-leds";
 		heartbeat {

arch/arm/boot/dts/omap3-overo-tobi.dts

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+

arch/arm/boot/dts/omap3-overo.dtsi

@@ -9,9 +9,6 @@
 /*
  * The Gumstix Overo must be combined with an expansion board.
  */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
 
 / {
 	pwmleds {

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -426,7 +426,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -383,7 +383,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -346,7 +346,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -454,7 +454,7 @@
 		rtc: rtc@01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 1>;
+			interrupts = <0 24 4>;
 		};
 
 		sid: eeprom@01c23800 {
@@ -463,7 +463,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <0 29 4>;
 		};
@@ -596,10 +596,10 @@
 		hstimer@01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 1>,
-				     <0 82 1>,
-				     <0 83 1>,
-				     <0 84 1>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
 			clocks = <&ahb_gates 28>;
 		};
 

arch/arm/boot/dts/tegra114.dtsi

@@ -57,6 +57,8 @@
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -72,6 +74,8 @@
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/tegra20.dtsi

@@ -94,6 +94,8 @@
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -109,6 +111,8 @@
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -28,7 +28,7 @@
 	compatible = "nvidia,cardhu", "nvidia,tegra30";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
 	};
 

arch/arm/boot/dts/tegra30.dtsi

@@ -170,6 +170,8 @@
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -185,6 +187,8 @@
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/testcases/tests.dtsi

@@ -1,2 +0,0 @@
-/include/ "tests-phandle.dtsi"
-/include/ "tests-interrupts.dtsi"

arch/arm/boot/dts/versatile-pb.dts

@@ -1,4 +1,4 @@
-/include/ "versatile-ab.dts"
+#include <versatile-ab.dts>
 
 / {
 	model = "ARM Versatile PB";
@@ -47,4 +47,4 @@
 	};
 };
 
-/include/ "testcases/tests.dtsi"
+#include <testcases.dtsi>

arch/arm/configs/tegra_defconfig

@@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y

arch/arm/include/asm/memory.h

@@ -30,14 +30,15 @@
  */
 #define UL(x) _AC(x, UL)
 
+/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
+
 #ifdef CONFIG_MMU
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
-#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
@@ -104,10 +105,6 @@
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		PLAT_PHYS_OFFSET
-#endif
-
 /*
  * The module can be at any place in ram in nommu mode.
  */

arch/arm/kernel/head-common.S

@@ -177,6 +177,18 @@ __lookup_processor_type_data:
 	.long	__proc_info_end
 	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
 
+__error_lpae:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_lpae
+	bl 	printascii
+	b	__error
+str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n"
+#else
+	b	__error
+#endif
+	.align
+ENDPROC(__error_lpae)
+
 __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1

arch/arm/kernel/head.S

@@ -102,7 +102,7 @@ ENTRY(stext)
 	and	r3, r3, #0xf			@ extract VMSA support
 	cmp	r3, #5				@ long-descriptor translation table format?
  THUMB( it	lo )				@ force fixup-able long branch encoding
-	blo	__error_p			@ only classic page table format
+	blo	__error_lpae			@ only classic page table format
 #endif
 
 #ifndef CONFIG_XIP_KERNEL

arch/arm/kvm/arm.c

@@ -878,7 +878,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
 				    unsigned long cmd,
 				    void *v)
 {
-	if (cmd == CPU_PM_EXIT) {
+	if (cmd == CPU_PM_EXIT &&
+	    __hyp_get_vectors() == hyp_default_vectors) {
 		cpu_init_hyp_mode(NULL);
 		return NOTIFY_OK;
 	}

arch/arm/kvm/interrupts.S

@@ -220,6 +220,10 @@ after_vfp_restore:
  * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
  * passed in r0 and r1.
  *
+ * A function pointer with a value of 0xffffffff has a special meaning,
+ * and is used to implement __hyp_get_vectors in the same way as in
+ * arch/arm/kernel/hyp_stub.S.
+ *
  * The calling convention follows the standard AAPCS:
  *   r0 - r3: caller save
  *   r12:     caller save
@@ -363,6 +367,11 @@ hyp_hvc:
 host_switch_to_hyp:
 	pop	{r0, r1, r2}
 
+	/* Check for __hyp_get_vectors */
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	beq	1f
+
 	push	{lr}
 	mrs	lr, SPSR
 	push	{lr}
@@ -378,7 +387,7 @@ THUMB(	orr	lr, #1)
 	pop	{lr}
 	msr	SPSR_csxf, lr
 	pop	{lr}
-	eret
+1:	eret
 
 guest_trap:
 	load_vcpu			@ Load VCPU pointer to r0

arch/arm/mach-imx/Makefile

@@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
-ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 # i.MX6SL reuses i.MX6Q code
 obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-endif
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o

arch/arm/mach-imx/common.h

@@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void);
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
-#ifdef CONFIG_PM
 void imx6q_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
+#ifdef CONFIG_PM
 void imx5_pm_init(void);
 #else
-static inline void imx6q_pm_init(void) {}
-static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
 static inline void imx5_pm_init(void) {}
 #endif
 

arch/arm/mach-omap1/board-nokia770.c

@@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 6,
+	.extcon		= "tahvo-usb",
 };
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

arch/arm/mach-omap2/Kconfig

@@ -50,6 +50,7 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -63,6 +64,7 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
@@ -72,6 +74,7 @@ config SOC_AM43XX
 	depends on ARCH_MULTI_V7
 	select CPU_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select MULTI_IRQ_HANDLER
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
@@ -80,6 +83,7 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_NOKIA_N800
-       bool
-
 config MACH_NOKIA_N810
        bool
 
@@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on SOC_OMAP2420
 	default y
-	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 	select OMAP_PACKAGE_ZAC

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
 	.enable		= &omap2_dflt_clk_enable,
 	.disable	= &omap2_dflt_clk_disable,
 	.is_enabled	= &omap2_dflt_clk_is_enabled,
+	.set_rate	= &omap3_clkoutx2_set_rate,
 	.recalc_rate	= &omap3_clkoutx2_recalc,
+	.round_rate	= &omap3_clkoutx2_round_rate,
 };
 
 static const struct clk_ops dpll4_m5x2_ck_3630_ops = {

arch/arm/mach-omap2/cpuidle44xx.c

@@ -23,6 +23,8 @@
 #include "prm.h"
 #include "clockdomain.h"
 
+#define MAX_CPUS	2
+
 /* Machine specific information */
 struct idle_statedata {
 	u32 cpu_state;
@@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = {
 	},
 };
 
-static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
-static struct clockdomain *cpu_clkdm[NR_CPUS];
+static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
+static struct clockdomain *cpu_clkdm[MAX_CPUS];
 
 static atomic_t abort_barrier;
-static bool cpu_done[NR_CPUS];
+static bool cpu_done[MAX_CPUS];
 static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */

arch/arm/mach-omap2/dpll3xxx.c

@@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 
 /* Clock control for DPLL outputs */
 
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+	struct clk_hw_omap *pclk = NULL;
+	struct clk *parent;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	do {
+		do {
+			parent = __clk_get_parent(hw->clk);
+			hw = __clk_get_hw(parent);
+		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+		if (!hw)
+			break;
+		pclk = to_clk_hw_omap(hw);
+	} while (pclk && !pclk->dpll_data);
+
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return NULL;
+	}
+
+	return pclk;
+}
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	unsigned long rate;
 	u32 v;
 	struct clk_hw_omap *pclk = NULL;
-	struct clk *parent;
 
 	if (!parent_rate)
 		return 0;
 
-	/* Walk up the parents of clk, looking for a DPLL */
-	do {
-		do {
-			parent = __clk_get_parent(hw->clk);
-			hw = __clk_get_hw(parent);
-		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
-		if (!hw)
-			break;
-		pclk = to_clk_hw_omap(hw);
-	} while (pclk && !pclk->dpll_data);
+	pclk = omap3_find_clkoutx2_dpll(hw);
 
-	/* clk does not have a DPLL as a parent?  error in the clock data */
-	if (!pclk) {
-		WARN_ON(1);
+	if (!pclk)
 		return 0;
-	}
 
 	dd = pclk->dpll_data;
 
@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	return rate;
 }
 
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!*prate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	/* TYPE J does not have a clkoutx2 */
+	if (dd->flags & DPLL_J_TYPE) {
+		*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+		return *prate;
+	}
+
+	WARN_ON(!dd->enable_mask);
+
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* If in bypass, the rate is fixed to the bypass rate*/
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		return *prate;
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / 2);
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return *prate * 2;
+}
+
 /* OMAP3/4 non-CORE DPLL clkops */
 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
 	.allow_idle	= omap3_dpll_allow_idle,

arch/arm/mach-omap2/gpmc.c

@@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 		of_property_read_bool(np, "gpmc,time-para-granularity");
 }
 
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
 
 static const char * const nand_xfer_types[] = {
 	[NAND_OMAP_PREFETCH_POLLED]		= "prefetch-polled",
@@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 }
 #endif
 
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
 static int gpmc_probe_onenand_child(struct platform_device *pdev,
 				 struct device_node *child)
 {

arch/arm/mach-omap2/io.c

@@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 		.length		= L4_EMU_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
-#if defined(CONFIG_DEBUG_LL) &&							\
-	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
-	{
-		.virtual	= ZOOM_UART_VIRT,
-		.pfn		= __phys_to_pfn(ZOOM_UART_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-#endif
 };
 #endif
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -1946,30 +1946,32 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	if (ret)
 		goto dis_opt_clks;
 
-	_write_sysconfig(v, oh);
-	ret = _clear_softreset(oh, &v);
-	if (ret)
-		goto dis_opt_clks;
-
 	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);
 
 	c = _wait_softreset_complete(oh);
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
+	if (c == MAX_MODULE_SOFTRESET_WAIT) {
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
+		ret = -ETIMEDOUT;
+		goto dis_opt_clks;
+	} else {
 		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+	}
+
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
 dis_opt_clks:
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_disable_optional_clocks(oh);

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 

arch/arm/mach-omap2/pdata-quirks.c

@@ -22,6 +22,8 @@
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
+#include "omap-secure.h"
+#include "soc.h"
 
 struct pdata_init {
 	const char *compatible;
@@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void)
 	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
+
+static void __init nokia_n900_legacy_init(void)
+{
+	hsmmc2_internal_input_clk();
+
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
+			pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+			/* set IBE to 1 */
+			rx51_secure_update_aux_cr(BIT(6), 0);
+		} else {
+			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+		}
+	}
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
@@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
 	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
-	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

arch/arm/mach-omap2/prminst44xx.c

@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
 					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 OMAP4430_PRM_DEVICE_INST,
+				 dev_inst,
 				 OMAP4_PRM_RSTCTRL_OFFSET);
 
 	/* OCP barrier */
 	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
+				    dev_inst,
 				    OMAP4_PRM_RSTCTRL_OFFSET);
 }

arch/arm/mach-pxa/mioa701.c

@@ -38,6 +38,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/max1586.h>
 #include <linux/slab.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -714,6 +715,10 @@ static struct gpio global_gpios[] = {
 	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+	REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
 static void __init mioa701_machine_init(void)
 {
 	int rc;
@@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void)
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+				     ARRAY_SIZE(fixed_5v0_consumers),
+				     5000000);
 }
 
 static void mioa701_machine_exit(void)

arch/arm/mach-sa1100/include/mach/collie.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+#include "hardware.h" /* Gives GPIO_MAX */
+
 extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)

arch/arm/mach-tegra/tegra.c

@@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = {
 static void __init tegra_init_cache(void)
 {
 #ifdef CONFIG_CACHE_L2X0
+	static const struct of_device_id pl310_ids[] __initconst = {
+		{ .compatible = "arm,pl310-cache",  },
+		{}
+	};
+
+	struct device_node *np;
 	int ret;
 	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
 	u32 aux_ctrl, cache_type;
 
+	np = of_find_matching_node(NULL, pl310_ids);
+	if (!np)
+		return;
+
 	cache_type = readl(p + L2X0_CACHE_TYPE);
 	aux_ctrl = (cache_type & 0x700) << (17-8);
 	aux_ctrl |= 0x7C400001;

arch/arm/mm/dump.c

@@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 			note_page(st, addr, 3, pmd_val(*pmd));
 		else
 			walk_pte(st, pmd, addr);
+
+		if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1]))
+			note_page(st, addr + SECTION_SIZE, 3, pmd_val(pmd[1]));
 	}
 }
 

arch/arm64/include/asm/percpu.h

@@ -16,6 +16,8 @@
 #ifndef __ASM_PERCPU_H
 #define __ASM_PERCPU_H
 
+#ifdef CONFIG_SMP
+
 static inline void set_my_cpu_offset(unsigned long off)
 {
 	asm volatile("msr tpidr_el1, %0" :: "r" (off) : "memory");
@@ -36,6 +38,12 @@ static inline unsigned long __my_cpu_offset(void)
 }
 #define __my_cpu_offset __my_cpu_offset()
 
+#else	/* !CONFIG_SMP */
+
+#define set_my_cpu_offset(x)	do { } while (0)
+
+#endif /* CONFIG_SMP */
+
 #include <asm-generic/percpu.h>
 
 #endif /* __ASM_PERCPU_H */

arch/arm64/include/asm/pgtable.h

@@ -136,11 +136,11 @@ extern struct page *empty_zero_page;
 /*
  * The following only work if pte_present(). Undefined behaviour otherwise.
  */
-#define pte_present(pte)	(pte_val(pte) & (PTE_VALID | PTE_PROT_NONE))
-#define pte_dirty(pte)		(pte_val(pte) & PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & PTE_AF)
-#define pte_special(pte)	(pte_val(pte) & PTE_SPECIAL)
-#define pte_write(pte)		(pte_val(pte) & PTE_WRITE)
+#define pte_present(pte)	(!!(pte_val(pte) & (PTE_VALID | PTE_PROT_NONE)))
+#define pte_dirty(pte)		(!!(pte_val(pte) & PTE_DIRTY))
+#define pte_young(pte)		(!!(pte_val(pte) & PTE_AF))
+#define pte_special(pte)	(!!(pte_val(pte) & PTE_SPECIAL))
+#define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
 #define pte_valid_user(pte) \

arch/arm64/kernel/stacktrace.c

@@ -48,7 +48,11 @@ int unwind_frame(struct stackframe *frame)
 
 	frame->sp = fp + 0x10;
 	frame->fp = *(unsigned long *)(fp);
-	frame->pc = *(unsigned long *)(fp + 8);
+	/*
+	 * -4 here because we care about the PC at time of bl,
+	 * not where the return will go.
+	 */
+	frame->pc = *(unsigned long *)(fp + 8) - 4;
 
 	return 0;
 }

arch/arm64/kvm/hyp.S

@@ -694,6 +694,24 @@ __hyp_panic_str:
 
 	.align	2
 
+/*
+ * u64 kvm_call_hyp(void *hypfn, ...);
+ *
+ * This is not really a variadic function in the classic C-way and care must
+ * be taken when calling this to ensure parameters are passed in registers
+ * only, since the stack will change between the caller and the callee.
+ *
+ * Call the function with the first argument containing a pointer to the
+ * function you wish to call in Hyp mode, and subsequent arguments will be
+ * passed as x0, x1, and x2 (a maximum of 3 arguments in addition to the
+ * function pointer can be passed).  The function being called must be mapped
+ * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
+ * passed in r0 and r1.
+ *
+ * A function pointer with a value of 0 has a special meaning, and is
+ * used to implement __hyp_get_vectors in the same way as in
+ * arch/arm64/kernel/hyp_stub.S.
+ */
 ENTRY(kvm_call_hyp)
 	hvc	#0
 	ret
@@ -737,7 +755,12 @@ el1_sync:					// Guest trapped into EL2
 	pop	x2, x3
 	pop	x0, x1
 
-	push	lr, xzr
+	/* Check for __hyp_get_vectors */
+	cbnz	x0, 1f
+	mrs	x0, vbar_el2
+	b	2f
+
+1:	push	lr, xzr
 
 	/*
 	 * Compute the function address in EL2, and shuffle the parameters.
@@ -750,7 +773,7 @@ el1_sync:					// Guest trapped into EL2
 	blr	lr
 
 	pop	lr, xzr
-	eret
+2:	eret
 
 el1_trap:
 	/*

arch/c6x/include/asm/cache.h

@@ -12,6 +12,7 @@
 #define _ASM_C6X_CACHE_H
 
 #include <linux/irqflags.h>
+#include <linux/init.h>
 
 /*
  * Cache line size

arch/cris/include/asm/bitops.h

@@ -144,7 +144,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
  * definition, which doesn't have the same semantics.  We don't want to
  * use -fno-builtin, so just hide the name ffs.
  */
-#define ffs kernel_ffs
+#define ffs(x) kernel_ffs(x)
 
 #include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/__fls.h>

arch/ia64/kernel/uncached.c

@@ -98,7 +98,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
 	/* attempt to allocate a granule's worth of cached memory pages */
 
 	page = alloc_pages_exact_node(nid,
-				GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+				GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE,
 				IA64_GRANULE_SHIFT-PAGE_SHIFT);
 	if (!page) {
 		mutex_unlock(&uc_pool->add_chunk_mutex);

arch/m68k/include/asm/Kbuild

@@ -1,4 +1,4 @@
-
+generic-y += barrier.h
 generic-y += bitsperlong.h
 generic-y += clkdev.h
 generic-y += cputime.h
@@ -6,6 +6,7 @@ generic-y += device.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
+generic-y += hash.h
 generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
@@ -18,6 +19,7 @@ generic-y += local.h
 generic-y += mman.h
 generic-y += mutex.h
 generic-y += percpu.h
+generic-y += preempt.h
 generic-y += resource.h
 generic-y += scatterlist.h
 generic-y += sections.h
@@ -31,5 +33,3 @@ generic-y += trace_clock.h
 generic-y += types.h
 generic-y += word-at-a-time.h
 generic-y += xor.h
-generic-y += preempt.h
-generic-y += hash.h

arch/m68k/include/asm/barrier.h

@@ -1,8 +0,0 @@
-#ifndef _M68K_BARRIER_H
-#define _M68K_BARRIER_H
-
-#define nop()		do { asm volatile ("nop"); barrier(); } while (0)
-
-#include <asm-generic/barrier.h>
-
-#endif /* _M68K_BARRIER_H */

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		349
+#define NR_syscalls		351
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -354,5 +354,7 @@
 #define __NR_process_vm_writev	346
 #define __NR_kcmp		347
 #define __NR_finit_module	348
+#define __NR_sched_setattr	349
+#define __NR_sched_getattr	350
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -369,4 +369,6 @@ ENTRY(sys_call_table)
 	.long sys_process_vm_writev
 	.long sys_kcmp
 	.long sys_finit_module
+	.long sys_sched_setattr
+	.long sys_sched_getattr		/* 350 */
 

arch/powerpc/include/asm/compat.h

@@ -200,10 +200,11 @@ static inline void __user *arch_compat_alloc_user_space(long len)
 
 	/*
 	 * We can't access below the stack pointer in the 32bit ABI and
-	 * can access 288 bytes in the 64bit ABI
+	 * can access 288 bytes in the 64bit big-endian ABI,
+	 * or 512 bytes with the new ELFv2 little-endian ABI.
 	 */
 	if (!is_32bit_task())
-		usp -= 288;
+		usp -= USER_REDZONE_SIZE;
 
 	return (void __user *) (usp - len);
 }

arch/powerpc/include/asm/opal.h

@@ -816,8 +816,8 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 int64_t opal_pci_poll(uint64_t phb_id);
 int64_t opal_return_cpu(void);
 
-int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val);
-int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val);
+int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val);
+int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val);
 
 int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
 		       uint32_t addr, uint32_t data, uint32_t sz);

arch/powerpc/include/asm/ptrace.h

@@ -28,11 +28,23 @@
 
 #ifdef __powerpc64__
 
+/*
+ * Size of redzone that userspace is allowed to use below the stack
+ * pointer.  This is 288 in the 64-bit big-endian ELF ABI, and 512 in
+ * the new ELFv2 little-endian ABI, so we allow the larger amount.
+ *
+ * For kernel code we allow a 288-byte redzone, in order to conserve
+ * kernel stack space; gcc currently only uses 288 bytes, and will
+ * hopefully allow explicit control of the redzone size in future.
+ */
+#define USER_REDZONE_SIZE	512
+#define KERNEL_REDZONE_SIZE	288
+
 #define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
 #define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
 #define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
 #define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
-					STACK_FRAME_OVERHEAD + 288)
+				 STACK_FRAME_OVERHEAD + KERNEL_REDZONE_SIZE)
 #define STACK_FRAME_MARKER	12
 
 /* Size of dummy stack frame allocated when calling signal handler. */
@@ -41,6 +53,8 @@
 
 #else /* __powerpc64__ */
 
+#define USER_REDZONE_SIZE	0
+#define KERNEL_REDZONE_SIZE	0
 #define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
 #define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
 #define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)

arch/powerpc/kernel/crash_dump.c

@@ -98,17 +98,19 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 			size_t csize, unsigned long offset, int userbuf)
 {
 	void  *vaddr;
+	phys_addr_t paddr;
 
 	if (!csize)
 		return 0;
 
 	csize = min_t(size_t, csize, PAGE_SIZE);
+	paddr = pfn << PAGE_SHIFT;
 
-	if ((min_low_pfn < pfn) && (pfn < max_pfn)) {
-		vaddr = __va(pfn << PAGE_SHIFT);
+	if (memblock_is_region_memory(paddr, csize)) {
+		vaddr = __va(paddr);
 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
 	} else {
-		vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+		vaddr = __ioremap(paddr, PAGE_SIZE, 0);
 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
 		iounmap(vaddr);
 	}

arch/powerpc/kernel/ftrace.c

@@ -74,6 +74,7 @@ ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
  */
 static int test_24bit_addr(unsigned long ip, unsigned long addr)
 {
+	addr = ppc_function_entry((void *)addr);
 
 	/* use the create_branch to verify that this offset can be branched */
 	return create_branch((unsigned int *)ip, addr, 0);

arch/powerpc/kernel/process.c

@@ -1048,6 +1048,15 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	flush_altivec_to_thread(src);
 	flush_vsx_to_thread(src);
 	flush_spe_to_thread(src);
+	/*
+	 * Flush TM state out so we can copy it.  __switch_to_tm() does this
+	 * flush but it removes the checkpointed state from the current CPU and
+	 * transitions the CPU out of TM mode.  Hence we need to call
+	 * tm_recheckpoint_new_task() (on the same task) to restore the
+	 * checkpointed state back and the TM mode.
+	 */
+	__switch_to_tm(src);
+	tm_recheckpoint_new_task(src);
 
 	*dst = *src;
 

arch/powerpc/kernel/reloc_64.S

@@ -81,6 +81,7 @@ _GLOBAL(relocate)
 
 6:	blr
 
+.balign 8
 p_dyn:	.llong	__dynamic_start - 0b
 p_rela:	.llong	__rela_dyn_start - 0b
 p_st:	.llong	_stext - 0b

arch/powerpc/kernel/signal_64.c

@@ -65,8 +65,8 @@ struct rt_sigframe {
 	struct siginfo __user *pinfo;
 	void __user *puc;
 	struct siginfo info;
-	/* 64 bit ABI allows for 288 bytes below sp before decrementing it. */
-	char abigap[288];
+	/* New 64 bit little-endian ABI allows redzone of 512 bytes below sp */
+	char abigap[USER_REDZONE_SIZE];
 } __attribute__ ((aligned (16)));
 
 static const char fmt32[] = KERN_INFO \

arch/powerpc/platforms/cell/ras.c

@@ -123,7 +123,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 
 	area->nid = nid;
 	area->order = order;
-	area->pages = alloc_pages_exact_node(area->nid, GFP_KERNEL|GFP_THISNODE,
+	area->pages = alloc_pages_exact_node(area->nid,
+						GFP_KERNEL|__GFP_THISNODE,
 						area->order);
 
 	if (!area->pages) {

arch/powerpc/platforms/powernv/eeh-ioda.c

@@ -114,6 +114,7 @@ DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
 			ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
 #endif /* CONFIG_DEBUG_FS */
 
+
 /**
  * ioda_eeh_post_init - Chip dependent post initialization
  * @hose: PCI controller
@@ -221,6 +222,22 @@ static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
 	return ret;
 }
 
+static void ioda_eeh_phb_diag(struct pci_controller *hose)
+{
+	struct pnv_phb *phb = hose->private_data;
+	long rc;
+
+	rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
+					 PNV_PCI_DIAG_BUF_SIZE);
+	if (rc != OPAL_SUCCESS) {
+		pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
+			    __func__, hose->global_number, rc);
+		return;
+	}
+
+	pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
+}
+
 /**
  * ioda_eeh_get_state - Retrieve the state of PE
  * @pe: EEH PE
@@ -272,6 +289,9 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
 			result |= EEH_STATE_DMA_ACTIVE;
 			result |= EEH_STATE_MMIO_ENABLED;
 			result |= EEH_STATE_DMA_ENABLED;
+		} else if (!(pe->state & EEH_PE_ISOLATED)) {
+			eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+			ioda_eeh_phb_diag(hose);
 		}
 
 		return result;
@@ -315,6 +335,15 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
 			   __func__, fstate, hose->global_number, pe_no);
 	}
 
+	/* Dump PHB diag-data for frozen PE */
+	if (result != EEH_STATE_NOT_SUPPORT &&
+	    (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) !=
+	    (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) &&
+	    !(pe->state & EEH_PE_ISOLATED)) {
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		ioda_eeh_phb_diag(hose);
+	}
+
 	return result;
 }
 
@@ -529,42 +558,6 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
 	return ret;
 }
 
-/**
- * ioda_eeh_get_log - Retrieve error log
- * @pe: EEH PE
- * @severity: Severity level of the log
- * @drv_log: buffer to store the log
- * @len: space of the log buffer
- *
- * The function is used to retrieve error log from P7IOC.
- */
-static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
-			    char *drv_log, unsigned long len)
-{
-	s64 ret;
-	unsigned long flags;
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-
-	spin_lock_irqsave(&phb->lock, flags);
-
-	ret = opal_pci_get_phb_diag_data2(phb->opal_id,
-			phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
-	if (ret) {
-		spin_unlock_irqrestore(&phb->lock, flags);
-		pr_warning("%s: Can't get log for PHB#%x-PE#%x (%lld)\n",
-			   __func__, hose->global_number, pe->addr, ret);
-		return -EIO;
-	}
-
-	/* The PHB diag-data is always indicative */
-	pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
-
-	spin_unlock_irqrestore(&phb->lock, flags);
-
-	return 0;
-}
-
 /**
  * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
  * @pe: EEH PE
@@ -646,22 +639,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
 	}
 }
 
-static void ioda_eeh_phb_diag(struct pci_controller *hose)
-{
-	struct pnv_phb *phb = hose->private_data;
-	long rc;
-
-	rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
-					 PNV_PCI_DIAG_BUF_SIZE);
-	if (rc != OPAL_SUCCESS) {
-		pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
-			    __func__, hose->global_number, rc);
-		return;
-	}
-
-	pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
-}
-
 static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
 			       struct eeh_pe **pe)
 {
@@ -834,6 +811,20 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 				__func__, err_type);
 		}
 
+		/*
+		 * EEH core will try recover from fenced PHB or
+		 * frozen PE. In the time for frozen PE, EEH core
+		 * enable IO path for that before collecting logs,
+		 * but it ruins the site. So we have to dump the
+		 * log in advance here.
+		 */
+		if ((ret == EEH_NEXT_ERR_FROZEN_PE  ||
+		    ret == EEH_NEXT_ERR_FENCED_PHB) &&
+		    !((*pe)->state & EEH_PE_ISOLATED)) {
+			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+			ioda_eeh_phb_diag(hose);
+		}
+
 		/*
 		 * If we have no errors on the specific PHB or only
 		 * informative error there, we continue poking it.
@@ -852,7 +843,6 @@ struct pnv_eeh_ops ioda_eeh_ops = {
 	.set_option		= ioda_eeh_set_option,
 	.get_state		= ioda_eeh_get_state,
 	.reset			= ioda_eeh_reset,
-	.get_log		= ioda_eeh_get_log,
 	.configure_bridge	= ioda_eeh_configure_bridge,
 	.next_error		= ioda_eeh_next_error
 };

arch/powerpc/platforms/powernv/opal-xscom.c

@@ -71,11 +71,11 @@ static int opal_xscom_err_xlate(int64_t rc)
 	}
 }
 
-static u64 opal_scom_unmangle(u64 reg)
+static u64 opal_scom_unmangle(u64 addr)
 {
 	/*
 	 * XSCOM indirect addresses have the top bit set. Additionally
-	 * the reset of the top 3 nibbles is always 0.
+	 * the rest of the top 3 nibbles is always 0.
 	 *
 	 * Because the debugfs interface uses signed offsets and shifts
 	 * the address left by 3, we basically cannot use the top 4 bits
@@ -86,10 +86,13 @@ static u64 opal_scom_unmangle(u64 reg)
 	 * conversion here. To leave room for further xscom address
 	 * expansion, we only clear out the top byte
 	 *
+	 * For in-kernel use, we also support the real indirect bit, so
+	 * we test for any of the top 5 bits
+	 *
 	 */
-	if (reg & (1ull << 59))
-		reg = (reg & ~(0xffull << 56)) | (1ull << 63);
-	return reg;
+	if (addr & (0x1full << 59))
+		addr = (addr & ~(0xffull << 56)) | (1ull << 63);
+	return addr;
 }
 
 static int opal_scom_read(scom_map_t map, u64 reg, u64 *value)
@@ -98,8 +101,8 @@ static int opal_scom_read(scom_map_t map, u64 reg, u64 *value)
 	int64_t rc;
 	__be64 v;
 
-	reg = opal_scom_unmangle(reg);
-	rc = opal_xscom_read(m->chip, m->addr + reg, (__be64 *)__pa(&v));
+	reg = opal_scom_unmangle(m->addr + reg);
+	rc = opal_xscom_read(m->chip, reg, (__be64 *)__pa(&v));
 	*value = be64_to_cpu(v);
 	return opal_xscom_err_xlate(rc);
 }
@@ -109,8 +112,8 @@ static int opal_scom_write(scom_map_t map, u64 reg, u64 value)
 	struct opal_scom_map *m = map;
 	int64_t rc;
 
-	reg = opal_scom_unmangle(reg);
-	rc = opal_xscom_write(m->chip, m->addr + reg, value);
+	reg = opal_scom_unmangle(m->addr + reg);
+	rc = opal_xscom_write(m->chip, reg, value);
 	return opal_xscom_err_xlate(rc);
 }
 

arch/powerpc/platforms/powernv/pci.c

@@ -134,57 +134,72 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
 	pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n",
 		hose->global_number, common->version);
 
-	pr_info("  brdgCtl:              %08x\n", data->brdgCtl);
-
-	pr_info("  portStatusReg:        %08x\n", data->portStatusReg);
-	pr_info("  rootCmplxStatus:      %08x\n", data->rootCmplxStatus);
-	pr_info("  busAgentStatus:       %08x\n", data->busAgentStatus);
-
-	pr_info("  deviceStatus:         %08x\n", data->deviceStatus);
-	pr_info("  slotStatus:           %08x\n", data->slotStatus);
-	pr_info("  linkStatus:           %08x\n", data->linkStatus);
-	pr_info("  devCmdStatus:         %08x\n", data->devCmdStatus);
-	pr_info("  devSecStatus:         %08x\n", data->devSecStatus);
-
-	pr_info("  rootErrorStatus:      %08x\n", data->rootErrorStatus);
-	pr_info("  uncorrErrorStatus:    %08x\n", data->uncorrErrorStatus);
-	pr_info("  corrErrorStatus:      %08x\n", data->corrErrorStatus);
-	pr_info("  tlpHdr1:              %08x\n", data->tlpHdr1);
-	pr_info("  tlpHdr2:              %08x\n", data->tlpHdr2);
-	pr_info("  tlpHdr3:              %08x\n", data->tlpHdr3);
-	pr_info("  tlpHdr4:              %08x\n", data->tlpHdr4);
-	pr_info("  sourceId:             %08x\n", data->sourceId);
-	pr_info("  errorClass:           %016llx\n", data->errorClass);
-	pr_info("  correlator:           %016llx\n", data->correlator);
-	pr_info("  p7iocPlssr:           %016llx\n", data->p7iocPlssr);
-	pr_info("  p7iocCsr:             %016llx\n", data->p7iocCsr);
-	pr_info("  lemFir:               %016llx\n", data->lemFir);
-	pr_info("  lemErrorMask:         %016llx\n", data->lemErrorMask);
-	pr_info("  lemWOF:               %016llx\n", data->lemWOF);
-	pr_info("  phbErrorStatus:       %016llx\n", data->phbErrorStatus);
-	pr_info("  phbFirstErrorStatus:  %016llx\n", data->phbFirstErrorStatus);
-	pr_info("  phbErrorLog0:         %016llx\n", data->phbErrorLog0);
-	pr_info("  phbErrorLog1:         %016llx\n", data->phbErrorLog1);
-	pr_info("  mmioErrorStatus:      %016llx\n", data->mmioErrorStatus);
-	pr_info("  mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus);
-	pr_info("  mmioErrorLog0:        %016llx\n", data->mmioErrorLog0);
-	pr_info("  mmioErrorLog1:        %016llx\n", data->mmioErrorLog1);
-	pr_info("  dma0ErrorStatus:      %016llx\n", data->dma0ErrorStatus);
-	pr_info("  dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus);
-	pr_info("  dma0ErrorLog0:        %016llx\n", data->dma0ErrorLog0);
-	pr_info("  dma0ErrorLog1:        %016llx\n", data->dma0ErrorLog1);
-	pr_info("  dma1ErrorStatus:      %016llx\n", data->dma1ErrorStatus);
-	pr_info("  dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus);
-	pr_info("  dma1ErrorLog0:        %016llx\n", data->dma1ErrorLog0);
-	pr_info("  dma1ErrorLog1:        %016llx\n", data->dma1ErrorLog1);
+	if (data->brdgCtl)
+		pr_info("  brdgCtl:     %08x\n",
+			data->brdgCtl);
+	if (data->portStatusReg || data->rootCmplxStatus ||
+	    data->busAgentStatus)
+		pr_info("  UtlSts:      %08x %08x %08x\n",
+			data->portStatusReg, data->rootCmplxStatus,
+			data->busAgentStatus);
+	if (data->deviceStatus || data->slotStatus   ||
+	    data->linkStatus   || data->devCmdStatus ||
+	    data->devSecStatus)
+		pr_info("  RootSts:     %08x %08x %08x %08x %08x\n",
+			data->deviceStatus, data->slotStatus,
+			data->linkStatus, data->devCmdStatus,
+			data->devSecStatus);
+	if (data->rootErrorStatus   || data->uncorrErrorStatus ||
+	    data->corrErrorStatus)
+		pr_info("  RootErrSts:  %08x %08x %08x\n",
+			data->rootErrorStatus, data->uncorrErrorStatus,
+			data->corrErrorStatus);
+	if (data->tlpHdr1 || data->tlpHdr2 ||
+	    data->tlpHdr3 || data->tlpHdr4)
+		pr_info("  RootErrLog:  %08x %08x %08x %08x\n",
+			data->tlpHdr1, data->tlpHdr2,
+			data->tlpHdr3, data->tlpHdr4);
+	if (data->sourceId || data->errorClass ||
+	    data->correlator)
+		pr_info("  RootErrLog1: %08x %016llx %016llx\n",
+			data->sourceId, data->errorClass,
+			data->correlator);
+	if (data->p7iocPlssr || data->p7iocCsr)
+		pr_info("  PhbSts:      %016llx %016llx\n",
+			data->p7iocPlssr, data->p7iocCsr);
+	if (data->lemFir || data->lemErrorMask ||
+	    data->lemWOF)
+		pr_info("  Lem:         %016llx %016llx %016llx\n",
+			data->lemFir, data->lemErrorMask,
+			data->lemWOF);
+	if (data->phbErrorStatus || data->phbFirstErrorStatus ||
+	    data->phbErrorLog0   || data->phbErrorLog1)
+		pr_info("  PhbErr:      %016llx %016llx %016llx %016llx\n",
+			data->phbErrorStatus, data->phbFirstErrorStatus,
+			data->phbErrorLog0, data->phbErrorLog1);
+	if (data->mmioErrorStatus || data->mmioFirstErrorStatus ||
+	    data->mmioErrorLog0   || data->mmioErrorLog1)
+		pr_info("  OutErr:      %016llx %016llx %016llx %016llx\n",
+			data->mmioErrorStatus, data->mmioFirstErrorStatus,
+			data->mmioErrorLog0, data->mmioErrorLog1);
+	if (data->dma0ErrorStatus || data->dma0FirstErrorStatus ||
+	    data->dma0ErrorLog0   || data->dma0ErrorLog1)
+		pr_info("  InAErr:      %016llx %016llx %016llx %016llx\n",
+			data->dma0ErrorStatus, data->dma0FirstErrorStatus,
+			data->dma0ErrorLog0, data->dma0ErrorLog1);
+	if (data->dma1ErrorStatus || data->dma1FirstErrorStatus ||
+	    data->dma1ErrorLog0   || data->dma1ErrorLog1)
+		pr_info("  InBErr:      %016llx %016llx %016llx %016llx\n",
+			data->dma1ErrorStatus, data->dma1FirstErrorStatus,
+			data->dma1ErrorLog0, data->dma1ErrorLog1);
 
 	for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
 		if ((data->pestA[i] >> 63) == 0 &&
 		    (data->pestB[i] >> 63) == 0)
 			continue;
 
-		pr_info("  PE[%3d] PESTA:        %016llx\n", i, data->pestA[i]);
-		pr_info("          PESTB:        %016llx\n", data->pestB[i]);
+		pr_info("  PE[%3d] A/B: %016llx %016llx\n",
+			i, data->pestA[i], data->pestB[i]);
 	}
 }
 
@@ -197,62 +212,77 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
 	data = (struct OpalIoPhb3ErrorData*)common;
 	pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n",
 		hose->global_number, common->version);
-
-	pr_info("  brdgCtl:              %08x\n", data->brdgCtl);
-
-	pr_info("  portStatusReg:        %08x\n", data->portStatusReg);
-	pr_info("  rootCmplxStatus:      %08x\n", data->rootCmplxStatus);
-	pr_info("  busAgentStatus:       %08x\n", data->busAgentStatus);
-
-	pr_info("  deviceStatus:         %08x\n", data->deviceStatus);
-	pr_info("  slotStatus:           %08x\n", data->slotStatus);
-	pr_info("  linkStatus:           %08x\n", data->linkStatus);
-	pr_info("  devCmdStatus:         %08x\n", data->devCmdStatus);
-	pr_info("  devSecStatus:         %08x\n", data->devSecStatus);
-
-	pr_info("  rootErrorStatus:      %08x\n", data->rootErrorStatus);
-	pr_info("  uncorrErrorStatus:    %08x\n", data->uncorrErrorStatus);
-	pr_info("  corrErrorStatus:      %08x\n", data->corrErrorStatus);
-	pr_info("  tlpHdr1:              %08x\n", data->tlpHdr1);
-	pr_info("  tlpHdr2:              %08x\n", data->tlpHdr2);
-	pr_info("  tlpHdr3:              %08x\n", data->tlpHdr3);
-	pr_info("  tlpHdr4:              %08x\n", data->tlpHdr4);
-	pr_info("  sourceId:             %08x\n", data->sourceId);
-	pr_info("  errorClass:           %016llx\n", data->errorClass);
-	pr_info("  correlator:           %016llx\n", data->correlator);
-
-	pr_info("  nFir:                 %016llx\n", data->nFir);
-	pr_info("  nFirMask:             %016llx\n", data->nFirMask);
-	pr_info("  nFirWOF:              %016llx\n", data->nFirWOF);
-	pr_info("  PhbPlssr:             %016llx\n", data->phbPlssr);
-	pr_info("  PhbCsr:               %016llx\n", data->phbCsr);
-	pr_info("  lemFir:               %016llx\n", data->lemFir);
-	pr_info("  lemErrorMask:         %016llx\n", data->lemErrorMask);
-	pr_info("  lemWOF:               %016llx\n", data->lemWOF);
-	pr_info("  phbErrorStatus:       %016llx\n", data->phbErrorStatus);
-	pr_info("  phbFirstErrorStatus:  %016llx\n", data->phbFirstErrorStatus);
-	pr_info("  phbErrorLog0:         %016llx\n", data->phbErrorLog0);
-	pr_info("  phbErrorLog1:         %016llx\n", data->phbErrorLog1);
-	pr_info("  mmioErrorStatus:      %016llx\n", data->mmioErrorStatus);
-	pr_info("  mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus);
-	pr_info("  mmioErrorLog0:        %016llx\n", data->mmioErrorLog0);
-	pr_info("  mmioErrorLog1:        %016llx\n", data->mmioErrorLog1);
-	pr_info("  dma0ErrorStatus:      %016llx\n", data->dma0ErrorStatus);
-	pr_info("  dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus);
-	pr_info("  dma0ErrorLog0:        %016llx\n", data->dma0ErrorLog0);
-	pr_info("  dma0ErrorLog1:        %016llx\n", data->dma0ErrorLog1);
-	pr_info("  dma1ErrorStatus:      %016llx\n", data->dma1ErrorStatus);
-	pr_info("  dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus);
-	pr_info("  dma1ErrorLog0:        %016llx\n", data->dma1ErrorLog0);
-	pr_info("  dma1ErrorLog1:        %016llx\n", data->dma1ErrorLog1);
+	if (data->brdgCtl)
+		pr_info("  brdgCtl:     %08x\n",
+			data->brdgCtl);
+	if (data->portStatusReg || data->rootCmplxStatus ||
+	    data->busAgentStatus)
+		pr_info("  UtlSts:      %08x %08x %08x\n",
+			data->portStatusReg, data->rootCmplxStatus,
+			data->busAgentStatus);
+	if (data->deviceStatus || data->slotStatus   ||
+	    data->linkStatus   || data->devCmdStatus ||
+	    data->devSecStatus)
+		pr_info("  RootSts:     %08x %08x %08x %08x %08x\n",
+			data->deviceStatus, data->slotStatus,
+			data->linkStatus, data->devCmdStatus,
+			data->devSecStatus);
+	if (data->rootErrorStatus || data->uncorrErrorStatus ||
+	    data->corrErrorStatus)
+		pr_info("  RootErrSts:  %08x %08x %08x\n",
+			data->rootErrorStatus, data->uncorrErrorStatus,
+			data->corrErrorStatus);
+	if (data->tlpHdr1 || data->tlpHdr2 ||
+	    data->tlpHdr3 || data->tlpHdr4)
+		pr_info("  RootErrLog:  %08x %08x %08x %08x\n",
+			data->tlpHdr1, data->tlpHdr2,
+			data->tlpHdr3, data->tlpHdr4);
+	if (data->sourceId || data->errorClass ||
+	    data->correlator)
+		pr_info("  RootErrLog1: %08x %016llx %016llx\n",
+			data->sourceId, data->errorClass,
+			data->correlator);
+	if (data->nFir || data->nFirMask ||
+	    data->nFirWOF)
+		pr_info("  nFir:        %016llx %016llx %016llx\n",
+			data->nFir, data->nFirMask,
+			data->nFirWOF);
+	if (data->phbPlssr || data->phbCsr)
+		pr_info("  PhbSts:      %016llx %016llx\n",
+			data->phbPlssr, data->phbCsr);
+	if (data->lemFir || data->lemErrorMask ||
+	    data->lemWOF)
+		pr_info("  Lem:         %016llx %016llx %016llx\n",
+			data->lemFir, data->lemErrorMask,
+			data->lemWOF);
+	if (data->phbErrorStatus || data->phbFirstErrorStatus ||
+	    data->phbErrorLog0   || data->phbErrorLog1)
+		pr_info("  PhbErr:      %016llx %016llx %016llx %016llx\n",
+			data->phbErrorStatus, data->phbFirstErrorStatus,
+			data->phbErrorLog0, data->phbErrorLog1);
+	if (data->mmioErrorStatus || data->mmioFirstErrorStatus ||
+	    data->mmioErrorLog0   || data->mmioErrorLog1)
+		pr_info("  OutErr:      %016llx %016llx %016llx %016llx\n",
+			data->mmioErrorStatus, data->mmioFirstErrorStatus,
+			data->mmioErrorLog0, data->mmioErrorLog1);
+	if (data->dma0ErrorStatus || data->dma0FirstErrorStatus ||
+	    data->dma0ErrorLog0   || data->dma0ErrorLog1)
+		pr_info("  InAErr:      %016llx %016llx %016llx %016llx\n",
+			data->dma0ErrorStatus, data->dma0FirstErrorStatus,
+			data->dma0ErrorLog0, data->dma0ErrorLog1);
+	if (data->dma1ErrorStatus || data->dma1FirstErrorStatus ||
+	    data->dma1ErrorLog0   || data->dma1ErrorLog1)
+		pr_info("  InBErr:      %016llx %016llx %016llx %016llx\n",
+			data->dma1ErrorStatus, data->dma1FirstErrorStatus,
+			data->dma1ErrorLog0, data->dma1ErrorLog1);
 
 	for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) {
 		if ((data->pestA[i] >> 63) == 0 &&
 		    (data->pestB[i] >> 63) == 0)
 			continue;
 
-		pr_info("  PE[%3d] PESTA:        %016llx\n", i, data->pestA[i]);
-		pr_info("          PESTB:        %016llx\n", data->pestB[i]);
+		pr_info("  PE[%3d] A/B: %016llx %016llx\n",
+			i, data->pestA[i], data->pestB[i]);
 	}
 }
 

arch/powerpc/platforms/pseries/hotplug-cpu.c

@@ -35,12 +35,7 @@
 #include "offline_states.h"
 
 /* This version can't take the spinlock, because it never returns */
-static struct rtas_args rtas_stop_self_args = {
-	.token = RTAS_UNKNOWN_SERVICE,
-	.nargs = 0,
-	.nret = 1,
-	.rets = &rtas_stop_self_args.args[0],
-};
+static int rtas_stop_self_token = RTAS_UNKNOWN_SERVICE;
 
 static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) =
 							CPU_STATE_OFFLINE;
@@ -93,15 +88,20 @@ void set_default_offline_state(int cpu)
 
 static void rtas_stop_self(void)
 {
-	struct rtas_args *args = &rtas_stop_self_args;
+	struct rtas_args args = {
+		.token = cpu_to_be32(rtas_stop_self_token),
+		.nargs = 0,
+		.nret = 1,
+		.rets = &args.args[0],
+	};
 
 	local_irq_disable();
 
-	BUG_ON(args->token == RTAS_UNKNOWN_SERVICE);
+	BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
 
 	printk("cpu %u (hwid %u) Ready to die...\n",
 	       smp_processor_id(), hard_smp_processor_id());
-	enter_rtas(__pa(args));
+	enter_rtas(__pa(&args));
 
 	panic("Alas, I survived.\n");
 }
@@ -392,10 +392,10 @@ static int __init pseries_cpu_hotplug_init(void)
 		}
 	}
 
-	rtas_stop_self_args.token = rtas_token("stop-self");
+	rtas_stop_self_token = rtas_token("stop-self");
 	qcss_tok = rtas_token("query-cpu-stopped-state");
 
-	if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE ||
+	if (rtas_stop_self_token == RTAS_UNKNOWN_SERVICE ||
 			qcss_tok == RTAS_UNKNOWN_SERVICE) {
 		printk(KERN_INFO "CPU Hotplug not supported by firmware "
 				"- disabling.\n");

arch/s390/kernel/compat_wrapper.S

@@ -1421,5 +1421,5 @@ ENTRY(sys_sched_setattr_wrapper)
 ENTRY(sys_sched_getattr_wrapper)
 	lgfr	%r2,%r2			# pid_t
 	llgtr	%r3,%r3			# const char __user *
-	llgfr	%r3,%r3			# unsigned int
+	llgfr	%r4,%r4			# unsigned int
 	jg	sys_sched_getattr

arch/s390/pci/pci_dma.c

@@ -206,11 +206,13 @@ static void dma_cleanup_tables(struct zpci_dev *zdev)
 	zdev->dma_table = NULL;
 }
 
-static unsigned long __dma_alloc_iommu(struct zpci_dev *zdev, unsigned long start,
-				   int size)
+static unsigned long __dma_alloc_iommu(struct zpci_dev *zdev,
+				       unsigned long start, int size)
 {
-	unsigned long boundary_size = 0x1000000;
+	unsigned long boundary_size;
 
+	boundary_size = ALIGN(dma_get_seg_boundary(&zdev->pdev->dev) + 1,
+			      PAGE_SIZE) >> PAGE_SHIFT;
 	return iommu_area_alloc(zdev->iommu_bitmap, zdev->iommu_pages,
 				start, size, 0, boundary_size, 0);
 }

arch/sh/include/cpu-sh2/cpu/cache.h

@@ -18,7 +18,7 @@
 #define SH_CACHE_ASSOC		8
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CCR		0xffffffec
+#define SH_CCR		0xffffffec
 
 #define CCR_CACHE_CE	0x01	/* Cache enable */
 #define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */

arch/sh/include/cpu-sh2a/cpu/cache.h

@@ -17,8 +17,8 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xfffc1000 /* CCR1 */
-#define CCR2		0xfffc1004
+#define SH_CCR		0xfffc1000 /* CCR1 */
+#define SH_CCR2		0xfffc1004
 
 /*
  * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not

arch/sh/include/cpu-sh3/cpu/cache.h

@@ -17,7 +17,7 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xffffffec	/* Address of Cache Control Register */
+#define SH_CCR		0xffffffec	/* Address of Cache Control Register */
 
 #define CCR_CACHE_CE	0x01	/* Cache Enable */
 #define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */

arch/sh/include/cpu-sh4/cpu/cache.h

@@ -17,7 +17,7 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xff00001c	/* Address of Cache Control Register */
+#define SH_CCR		0xff00001c	/* Address of Cache Control Register */
 #define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
 #define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
 #define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */

arch/sh/kernel/cpu/init.c

@@ -112,7 +112,7 @@ static void cache_init(void)
 	unsigned long ccr, flags;
 
 	jump_to_uncached();
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 
 	/*
 	 * At this point we don't know whether the cache is enabled or not - a
@@ -189,7 +189,7 @@ static void cache_init(void)
 
 	l2_cache_init();
 
-	__raw_writel(flags, CCR);
+	__raw_writel(flags, SH_CCR);
 	back_to_cached();
 }
 #else

arch/sh/mm/cache-debugfs.c

@@ -36,7 +36,7 @@ static int cache_seq_show(struct seq_file *file, void *iter)
 	 */
 	jump_to_uncached();
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	if ((ccr & CCR_CACHE_ENABLE) == 0) {
 		back_to_cached();
 

arch/sh/mm/cache-sh2.c

@@ -63,9 +63,9 @@ static void sh2__flush_invalidate_region(void *start, int size)
 	local_irq_save(flags);
 	jump_to_uncached();
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	ccr |= CCR_CACHE_INVALIDATE;
-	__raw_writel(ccr, CCR);
+	__raw_writel(ccr, SH_CCR);
 
 	back_to_cached();
 	local_irq_restore(flags);

arch/sh/mm/cache-sh2a.c

@@ -134,7 +134,8 @@ static void sh2a__flush_invalidate_region(void *start, int size)
 
 	/* If there are too many pages then just blow the cache */
 	if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
-		__raw_writel(__raw_readl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+		__raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
+			     SH_CCR);
 	} else {
 		for (v = begin; v < end; v += L1_CACHE_BYTES)
 			sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
@@ -167,7 +168,8 @@ static void sh2a_flush_icache_range(void *args)
 	/* I-Cache invalidate */
 	/* If there are too many pages then just blow the cache */
 	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-		__raw_writel(__raw_readl(CCR) | CCR_ICACHE_INVALIDATE, CCR);
+		__raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
+			     SH_CCR);
 	} else {
 		for (v = start; v < end; v += L1_CACHE_BYTES)
 			sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);

arch/sh/mm/cache-sh4.c

@@ -133,9 +133,9 @@ static void flush_icache_all(void)
 	jump_to_uncached();
 
 	/* Flush I-cache */
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	ccr |= CCR_CACHE_ICI;
-	__raw_writel(ccr, CCR);
+	__raw_writel(ccr, SH_CCR);
 
 	/*
 	 * back_to_cached() will take care of the barrier for us, don't add

arch/sh/mm/cache-shx3.c

@@ -19,7 +19,7 @@ void __init shx3_cache_init(void)
 {
 	unsigned int ccr;
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 
 	/*
 	 * If we've got cache aliases, resolve them in hardware.
@@ -40,5 +40,5 @@ void __init shx3_cache_init(void)
 	ccr |= CCR_CACHE_IBE;
 #endif
 
-	writel_uncached(ccr, CCR);
+	writel_uncached(ccr, SH_CCR);
 }