MIPS: Loongson1B: Some updates/fixes for LS1B

- Add DMA device
- Add NAND device
- Add GPIO device
- Add LED device
- Update the defconfig and rename it to loongson1b_defconfig
- Fix ioremap size
- Other minor fixes

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/13033/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -1387,6 +1387,8 @@ config CPU_LOONGSON1B
 	bool "Loongson 1B"
 	depends on SYS_HAS_CPU_LOONGSON1B
 	select CPU_LOONGSON1
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
 	  release 2 instruction set.

arch/mips/configs/ls1b_defconfig → arch/mips/configs/loongson1b_defconfig

@@ -1,19 +1,17 @@
 CONFIG_MACH_LOONGSON32=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
@@ -41,6 +39,12 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_LOONGSON1=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=m
 # CONFIG_SCSI_PROC_FS is not set
@@ -48,7 +52,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -56,7 +59,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_DA=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -69,18 +71,25 @@ CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_LOONGSON1=y
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_HID=m
 CONFIG_HID_GENERIC=m
+CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_PL2303=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_LOONGSON1=y
 # CONFIG_IOMMU_SUPPORT is not set
@@ -96,15 +105,21 @@ CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_ATIME_SUPPORT=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
+CONFIG_DYNAMIC_DEBUG=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_HW is not set

arch/mips/include/asm/mach-loongson32/cpufreq.h

@@ -9,7 +9,6 @@
  * option) any later version.
  */
 
-
 #ifndef __ASM_MACH_LOONGSON32_CPUFREQ_H
 #define __ASM_MACH_LOONGSON32_CPUFREQ_H
 

arch/mips/include/asm/mach-loongson32/dma.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 NAND platform support.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_DMA_H
+#define __ASM_MACH_LOONGSON32_DMA_H
+
+#define LS1X_DMA_CHANNEL0	0
+#define LS1X_DMA_CHANNEL1	1
+#define LS1X_DMA_CHANNEL2	2
+
+struct plat_ls1x_dma {
+	int nr_channels;
+};
+
+extern struct plat_ls1x_dma ls1b_dma_pdata;
+
+#endif /* __ASM_MACH_LOONGSON32_DMA_H */

arch/mips/include/asm/mach-loongson32/irq.h

@@ -9,7 +9,6 @@
  * option) any later version.
  */
 
-
 #ifndef __ASM_MACH_LOONGSON32_IRQ_H
 #define __ASM_MACH_LOONGSON32_IRQ_H
 

arch/mips/include/asm/mach-loongson32/loongson1.h

@@ -9,7 +9,6 @@
  * option) any later version.
  */
 
-
 #ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
 #define __ASM_MACH_LOONGSON32_LOONGSON1_H
 
@@ -18,6 +17,9 @@
 /* Loongson 1 Register Bases */
 #define LS1X_MUX_BASE			0x1fd00420
 #define LS1X_INTC_BASE			0x1fd01040
+#define LS1X_GPIO0_BASE			0x1fd010c0
+#define LS1X_GPIO1_BASE			0x1fd010c4
+#define LS1X_DMAC_BASE			0x1fd01160
 #define LS1X_EHCI_BASE			0x1fe00000
 #define LS1X_OHCI_BASE			0x1fe08000
 #define LS1X_GMAC0_BASE			0x1fe10000

arch/mips/include/asm/mach-loongson32/nand.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 NAND platform support.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON32_NAND_H
+#define __ASM_MACH_LOONGSON32_NAND_H
+
+#include <linux/dmaengine.h>
+#include <linux/mtd/partitions.h>
+
+struct plat_ls1x_nand {
+	struct mtd_partition *parts;
+	unsigned int nr_parts;
+
+	int hold_cycle;
+	int wait_cycle;
+};
+
+extern struct plat_ls1x_nand ls1b_nand_pdata;
+
+bool ls1x_dma_filter_fn(struct dma_chan *chan, void *param);
+
+#endif /* __ASM_MACH_LOONGSON32_NAND_H */

arch/mips/include/asm/mach-loongson32/platform.h

@@ -7,20 +7,28 @@
  * option) any later version.
  */
 
-
 #ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
 #define __ASM_MACH_LOONGSON32_PLATFORM_H
 
 #include <linux/platform_device.h>
 
+#include <dma.h>
+#include <nand.h>
+
 extern struct platform_device ls1x_uart_pdev;
 extern struct platform_device ls1x_cpufreq_pdev;
+extern struct platform_device ls1x_dma_pdev;
 extern struct platform_device ls1x_eth0_pdev;
 extern struct platform_device ls1x_eth1_pdev;
 extern struct platform_device ls1x_ehci_pdev;
+extern struct platform_device ls1x_gpio0_pdev;
+extern struct platform_device ls1x_gpio1_pdev;
+extern struct platform_device ls1x_nand_pdev;
 extern struct platform_device ls1x_rtc_pdev;
 
-extern void __init ls1x_clk_init(void);
-extern void __init ls1x_serial_setup(struct platform_device *pdev);
+void __init ls1x_clk_init(void);
+void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata);
+void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata);
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
 
 #endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */

arch/mips/include/asm/mach-loongson32/regs-clk.h

@@ -19,18 +19,18 @@
 #define LS1X_CLK_PLL_DIV		LS1X_CLK_REG(0x4)
 
 /* Clock PLL Divisor Register Bits */
-#define DIV_DC_EN			(0x1 << 31)
-#define DIV_DC_RST			(0x1 << 30)
-#define DIV_CPU_EN			(0x1 << 25)
-#define DIV_CPU_RST			(0x1 << 24)
-#define DIV_DDR_EN			(0x1 << 19)
-#define DIV_DDR_RST			(0x1 << 18)
-#define RST_DC_EN			(0x1 << 5)
-#define RST_DC				(0x1 << 4)
-#define RST_DDR_EN			(0x1 << 3)
-#define RST_DDR				(0x1 << 2)
-#define RST_CPU_EN			(0x1 << 1)
-#define RST_CPU				0x1
+#define DIV_DC_EN			BIT(31)
+#define DIV_DC_RST			BIT(30)
+#define DIV_CPU_EN			BIT(25)
+#define DIV_CPU_RST			BIT(24)
+#define DIV_DDR_EN			BIT(19)
+#define DIV_DDR_RST			BIT(18)
+#define RST_DC_EN			BIT(5)
+#define RST_DC				BIT(4)
+#define RST_DDR_EN			BIT(3)
+#define RST_DDR				BIT(2)
+#define RST_CPU_EN			BIT(1)
+#define RST_CPU				BIT(0)
 
 #define DIV_DC_SHIFT			26
 #define DIV_CPU_SHIFT			20

arch/mips/include/asm/mach-loongson32/regs-mux.h

@@ -19,49 +19,49 @@
 #define LS1X_MUX_CTRL1			LS1X_MUX_REG(0x4)
 
 /* MUX CTRL0 Register Bits */
-#define UART0_USE_PWM23			(0x1 << 28)
-#define UART0_USE_PWM01			(0x1 << 27)
-#define UART1_USE_LCD0_5_6_11		(0x1 << 26)
-#define I2C2_USE_CAN1			(0x1 << 25)
-#define I2C1_USE_CAN0			(0x1 << 24)
-#define NAND3_USE_UART5			(0x1 << 23)
-#define NAND3_USE_UART4			(0x1 << 22)
-#define NAND3_USE_UART1_DAT		(0x1 << 21)
-#define NAND3_USE_UART1_CTS		(0x1 << 20)
-#define NAND3_USE_PWM23			(0x1 << 19)
-#define NAND3_USE_PWM01			(0x1 << 18)
-#define NAND2_USE_UART5			(0x1 << 17)
-#define NAND2_USE_UART4			(0x1 << 16)
-#define NAND2_USE_UART1_DAT		(0x1 << 15)
-#define NAND2_USE_UART1_CTS		(0x1 << 14)
-#define NAND2_USE_PWM23			(0x1 << 13)
-#define NAND2_USE_PWM01			(0x1 << 12)
-#define NAND1_USE_UART5			(0x1 << 11)
-#define NAND1_USE_UART4			(0x1 << 10)
-#define NAND1_USE_UART1_DAT		(0x1 << 9)
-#define NAND1_USE_UART1_CTS		(0x1 << 8)
-#define NAND1_USE_PWM23			(0x1 << 7)
-#define NAND1_USE_PWM01			(0x1 << 6)
-#define GMAC1_USE_UART1			(0x1 << 4)
-#define GMAC1_USE_UART0			(0x1 << 3)
-#define LCD_USE_UART0_DAT		(0x1 << 2)
-#define LCD_USE_UART15			(0x1 << 1)
-#define LCD_USE_UART0			0x1
+#define UART0_USE_PWM23			BIT(28)
+#define UART0_USE_PWM01			BIT(27)
+#define UART1_USE_LCD0_5_6_11		BIT(26)
+#define I2C2_USE_CAN1			BIT(25)
+#define I2C1_USE_CAN0			BIT(24)
+#define NAND3_USE_UART5			BIT(23)
+#define NAND3_USE_UART4			BIT(22)
+#define NAND3_USE_UART1_DAT		BIT(21)
+#define NAND3_USE_UART1_CTS		BIT(20)
+#define NAND3_USE_PWM23			BIT(19)
+#define NAND3_USE_PWM01			BIT(18)
+#define NAND2_USE_UART5			BIT(17)
+#define NAND2_USE_UART4			BIT(16)
+#define NAND2_USE_UART1_DAT		BIT(15)
+#define NAND2_USE_UART1_CTS		BIT(14)
+#define NAND2_USE_PWM23			BIT(13)
+#define NAND2_USE_PWM01			BIT(12)
+#define NAND1_USE_UART5			BIT(11)
+#define NAND1_USE_UART4			BIT(10)
+#define NAND1_USE_UART1_DAT		BIT(9)
+#define NAND1_USE_UART1_CTS		BIT(8)
+#define NAND1_USE_PWM23			BIT(7)
+#define NAND1_USE_PWM01			BIT(6)
+#define GMAC1_USE_UART1			BIT(4)
+#define GMAC1_USE_UART0			BIT(3)
+#define LCD_USE_UART0_DAT		BIT(2)
+#define LCD_USE_UART15			BIT(1)
+#define LCD_USE_UART0			BIT(0)
 
 /* MUX CTRL1 Register Bits */
-#define USB_RESET			(0x1 << 31)
-#define SPI1_CS_USE_PWM01		(0x1 << 24)
-#define SPI1_USE_CAN			(0x1 << 23)
-#define DISABLE_DDR_CONFSPACE		(0x1 << 20)
-#define DDR32TO16EN			(0x1 << 16)
-#define GMAC1_SHUT			(0x1 << 13)
-#define GMAC0_SHUT			(0x1 << 12)
-#define USB_SHUT			(0x1 << 11)
-#define UART1_3_USE_CAN1		(0x1 << 5)
-#define UART1_2_USE_CAN0		(0x1 << 4)
-#define GMAC1_USE_TXCLK			(0x1 << 3)
-#define GMAC0_USE_TXCLK			(0x1 << 2)
-#define GMAC1_USE_PWM23			(0x1 << 1)
-#define GMAC0_USE_PWM01			0x1
+#define USB_RESET			BIT(31)
+#define SPI1_CS_USE_PWM01		BIT(24)
+#define SPI1_USE_CAN			BIT(23)
+#define DISABLE_DDR_CONFSPACE		BIT(20)
+#define DDR32TO16EN			BIT(16)
+#define GMAC1_SHUT			BIT(13)
+#define GMAC0_SHUT			BIT(12)
+#define USB_SHUT			BIT(11)
+#define UART1_3_USE_CAN1		BIT(5)
+#define UART1_2_USE_CAN0		BIT(4)
+#define GMAC1_USE_TXCLK			BIT(3)
+#define GMAC0_USE_TXCLK			BIT(2)
+#define GMAC1_USE_PWM23			BIT(1)
+#define GMAC0_USE_PWM01			BIT(0)
 
 #endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */

arch/mips/include/asm/mach-loongson32/regs-pwm.h

@@ -19,11 +19,11 @@
 #define PWM_CTRL		0xc
 
 /* PWM Control Register Bits */
-#define CNT_RST			(0x1 << 7)
-#define INT_SR			(0x1 << 6)
-#define INT_EN			(0x1 << 5)
-#define PWM_SINGLE		(0x1 << 4)
-#define PWM_OE			(0x1 << 3)
-#define CNT_EN			0x1
+#define CNT_RST			BIT(7)
+#define INT_SR			BIT(6)
+#define INT_EN			BIT(5)
+#define PWM_SINGLE		BIT(4)
+#define PWM_OE			BIT(3)
+#define CNT_EN			BIT(0)
 
 #endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */

arch/mips/loongson32/common/platform.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
  *
  * This program is free software; you can redistribute	it and/or modify it
  * under  the terms of	the GNU General	 Public License as published by the
@@ -10,14 +10,17 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
 #include <linux/phy.h>
 #include <linux/serial_8250.h>
 #include <linux/stmmac.h>
 #include <linux/usb/ehci_pdriver.h>
-#include <asm-generic/sizes.h>
 
-#include <cpufreq.h>
 #include <loongson1.h>
+#include <cpufreq.h>
+#include <dma.h>
+#include <nand.h>
 
 /* 8250/16550 compatible UART */
 #define LS1X_UART(_id)						\
@@ -45,7 +48,7 @@ struct platform_device ls1x_uart_pdev = {
 	},
 };
 
-void __init ls1x_serial_setup(struct platform_device *pdev)
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct plat_serial8250_port *p;
@@ -77,6 +80,42 @@ struct platform_device ls1x_cpufreq_pdev = {
 	},
 };
 
+/* DMA */
+static struct resource ls1x_dma_resources[] = {
+	[0] = {
+		.start = LS1X_DMAC_BASE,
+		.end = LS1X_DMAC_BASE + SZ_4 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = LS1X_DMA0_IRQ,
+		.end = LS1X_DMA0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = LS1X_DMA1_IRQ,
+		.end = LS1X_DMA1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start = LS1X_DMA2_IRQ,
+		.end = LS1X_DMA2_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device ls1x_dma_pdev = {
+	.name		= "ls1x-dma",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ls1x_dma_resources),
+	.resource	= ls1x_dma_resources,
+};
+
+void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata)
+{
+	ls1x_dma_pdev.dev.platform_data = pdata;
+}
+
 /* Synopsys Ethernet GMAC */
 static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
 	.phy_mask	= 0,
@@ -198,6 +237,64 @@ struct platform_device ls1x_eth1_pdev = {
 	},
 };
 
+/* GPIO */
+static struct resource ls1x_gpio0_resources[] = {
+	[0] = {
+		.start	= LS1X_GPIO0_BASE,
+		.end	= LS1X_GPIO0_BASE + SZ_4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device ls1x_gpio0_pdev = {
+	.name		= "ls1x-gpio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ls1x_gpio0_resources),
+	.resource	= ls1x_gpio0_resources,
+};
+
+static struct resource ls1x_gpio1_resources[] = {
+	[0] = {
+		.start	= LS1X_GPIO1_BASE,
+		.end	= LS1X_GPIO1_BASE + SZ_4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device ls1x_gpio1_pdev = {
+	.name		= "ls1x-gpio",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ls1x_gpio1_resources),
+	.resource	= ls1x_gpio1_resources,
+};
+
+/* NAND Flash */
+static struct resource ls1x_nand_resources[] = {
+	[0] = {
+		.start	= LS1X_NAND_BASE,
+		.end	= LS1X_NAND_BASE + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMA channel 0 is dedicated to NAND */
+		.start	= LS1X_DMA_CHANNEL0,
+		.end	= LS1X_DMA_CHANNEL0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device ls1x_nand_pdev = {
+	.name		= "ls1x-nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ls1x_nand_resources),
+	.resource	= ls1x_nand_resources,
+};
+
+void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata)
+{
+	ls1x_nand_pdev.dev.platform_data = pdata;
+}
+
 /* USB EHCI */
 static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
 

arch/mips/loongson32/common/reset.c

@@ -9,12 +9,13 @@
 
 #include <linux/io.h>
 #include <linux/pm.h>
+#include <linux/sizes.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
 
 #include <loongson1.h>
 
-static void __iomem *wdt_base;
+static void __iomem *wdt_reg_base;
 
 static void ls1x_halt(void)
 {
@@ -26,9 +27,9 @@ static void ls1x_halt(void)
 
 static void ls1x_restart(char *command)
 {
-	__raw_writel(0x1, wdt_base + WDT_EN);
-	__raw_writel(0x1, wdt_base + WDT_TIMER);
-	__raw_writel(0x1, wdt_base + WDT_SET);
+	__raw_writel(0x1, wdt_reg_base + WDT_EN);
+	__raw_writel(0x1, wdt_reg_base + WDT_TIMER);
+	__raw_writel(0x1, wdt_reg_base + WDT_SET);
 
 	ls1x_halt();
 }
@@ -40,8 +41,8 @@ static void ls1x_power_off(void)
 
 static int __init ls1x_reboot_setup(void)
 {
-	wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
-	if (!wdt_base)
+	wdt_reg_base = ioremap_nocache(LS1X_WDT_BASE, (SZ_4 + SZ_8));
+	if (!wdt_reg_base)
 		panic("Failed to remap watchdog registers");
 
 	_machine_restart = ls1x_restart;

arch/mips/loongson32/common/time.c

@@ -9,6 +9,7 @@
 
 #include <linux/clk.h>
 #include <linux/interrupt.h>
+#include <linux/sizes.h>
 #include <asm/time.h>
 
 #include <loongson1.h>
@@ -35,25 +36,25 @@
 
 DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
 
-static void __iomem *timer_base;
+static void __iomem *timer_reg_base;
 static uint32_t ls1x_jiffies_per_tick;
 
 static inline void ls1x_pwmtimer_set_period(uint32_t period)
 {
-	__raw_writel(period, timer_base + PWM_HRC);
-	__raw_writel(period, timer_base + PWM_LRC);
+	__raw_writel(period, timer_reg_base + PWM_HRC);
+	__raw_writel(period, timer_reg_base + PWM_LRC);
 }
 
 static inline void ls1x_pwmtimer_restart(void)
 {
-	__raw_writel(0x0, timer_base + PWM_CNT);
-	__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+	__raw_writel(0x0, timer_reg_base + PWM_CNT);
+	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
 }
 
 void __init ls1x_pwmtimer_init(void)
 {
-	timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
-	if (!timer_base)
+	timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16);
+	if (!timer_reg_base)
 		panic("Failed to remap timer registers");
 
 	ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
@@ -86,7 +87,7 @@ static cycle_t ls1x_clocksource_read(struct clocksource *cs)
 	 */
 	jifs = jiffies;
 	/* read the count */
-	count = __raw_readl(timer_base + PWM_CNT);
+	count = __raw_readl(timer_reg_base + PWM_CNT);
 
 	/*
 	 * It's possible for count to appear to go the wrong way for this
@@ -131,7 +132,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
 	raw_spin_lock(&ls1x_timer_lock);
 	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
 	ls1x_pwmtimer_restart();
-	__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
 	raw_spin_unlock(&ls1x_timer_lock);
 
 	return 0;
@@ -140,7 +141,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
 static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
 {
 	raw_spin_lock(&ls1x_timer_lock);
-	__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
 	raw_spin_unlock(&ls1x_timer_lock);
 
 	return 0;
@@ -149,8 +150,8 @@ static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
 static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
 {
 	raw_spin_lock(&ls1x_timer_lock);
-	__raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
-		     timer_base + PWM_CTRL);
+	__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
+		     timer_reg_base + PWM_CTRL);
 	raw_spin_unlock(&ls1x_timer_lock);
 
 	return 0;
@@ -220,7 +221,7 @@ void __init plat_time_init(void)
 
 #ifdef CONFIG_CEVT_CSRC_LS1X
 	/* setup LS1X PWM timer */
-	clk = clk_get(NULL, "ls1x_pwmtimer");
+	clk = clk_get(NULL, "ls1x-pwmtimer");
 	if (IS_ERR(clk))
 		panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
 

arch/mips/loongson32/ls1b/board.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
  *
  * This program is free software; you can redistribute	it and/or modify it
  * under  the terms of	the GNU General	 Public License as published by the
@@ -7,26 +7,83 @@
  * option) any later version.
  */
 
+#include <linux/leds.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+
+#include <loongson1.h>
+#include <dma.h>
+#include <nand.h>
 #include <platform.h>
 
+struct plat_ls1x_dma ls1x_dma_pdata = {
+	.nr_channels	= 3,
+};
+
+static struct mtd_partition ls1x_nand_parts[] = {
+	{
+		.name        = "kernel",
+		.offset      = 0,
+		.size        = SZ_16M,
+	},
+	{
+		.name        = "rootfs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+struct plat_ls1x_nand ls1x_nand_pdata = {
+	.parts		= ls1x_nand_parts,
+	.nr_parts	= ARRAY_SIZE(ls1x_nand_parts),
+	.hold_cycle	= 0x2,
+	.wait_cycle	= 0xc,
+};
+
+static const struct gpio_led ls1x_gpio_leds[] __initconst = {
+	{
+		.name			= "LED9",
+		.default_trigger	= "heartbeat",
+		.gpio			= 38,
+		.active_low		= 1,
+		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name			= "LED6",
+		.default_trigger	= "nand-disk",
+		.gpio			= 39,
+		.active_low		= 1,
+		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
+	.num_leds	= ARRAY_SIZE(ls1x_gpio_leds),
+	.leds		= ls1x_gpio_leds,
+};
+
 static struct platform_device *ls1b_platform_devices[] __initdata = {
 	&ls1x_uart_pdev,
 	&ls1x_cpufreq_pdev,
+	&ls1x_dma_pdev,
 	&ls1x_eth0_pdev,
 	&ls1x_eth1_pdev,
 	&ls1x_ehci_pdev,
+	&ls1x_gpio0_pdev,
+	&ls1x_gpio1_pdev,
+	&ls1x_nand_pdev,
 	&ls1x_rtc_pdev,
 };
 
 static int __init ls1b_platform_init(void)
 {
-	int err;
+	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+	ls1x_dma_set_platdata(&ls1x_dma_pdata);
+	ls1x_nand_set_platdata(&ls1x_nand_pdata);
 
-	ls1x_serial_setup(&ls1x_uart_pdev);
+	gpio_led_register_device(-1, &ls1x_led_pdata);
 
-	err = platform_add_devices(ls1b_platform_devices,
+	return platform_add_devices(ls1b_platform_devices,
 				   ARRAY_SIZE(ls1b_platform_devices));
-	return err;
 }
 
 arch_initcall(ls1b_platform_init);