Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A fairly large (by DT standards) pull request this time with the
  majority being some overdue moving DT binding docs around to
  consolidate similar bindings.

   - DT binding doc consolidation moving similar bindings to common
     locations.  The majority of these are display related which were
     scattered in video/, fb/, drm/, gpu/, and panel/ directories.

   - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
     dtbs in the tree for most arches with dts files (except powerpc for
     now).

   - OF_IRQ=n fixes for user enabled CONFIG_OF.

   - of_node_put ref counting fixes from Julia Lawall.

   - Common DT binding for wakeup-source and deprecation of all similar
     bindings.

   - DT binding for PXA LCD controller.

   - Allow ignoring failed PCI resource translations in order to ignore
     64-bit addresses on non-LPAE 32-bit kernels.

   - Support setting the NUMA node from DT instead of only from parent
     device.

   - Couple of earlycon DT parsing fixes for address and options"

* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  MAINTAINERS: update DT binding doc locations
  devicetree: add Sigma Designs vendor prefix
  of: simplify arch_find_n_match_cpu_physical_id() function
  Documentation: arm: Fixed typo in socfpga fpga mgr example
  Documentation: devicetree: fix reference to legacy wakeup properties
  Documentation: devicetree: standardize/consolidate on "wakeup-source" property
  drivers: of: removing assignment of 0 to static variable
  xtensa: enable building of all dtbs
  mips: enable building of all dtbs
  metag: enable building of all dtbs
  metag: use common make variables for dtb builds
  h8300: enable building of all dtbs
  arm64: enable building of all dtbs
  arm: enable building of all dtbs
  arc: enable building of all dtbs
  arc: use common make variables for dtb builds
  of: add config option to enable building of all dtbs
  of/fdt: fix error checking for earlycon address
  of/overlay: add missing of_node_put
  of/platform: add missing of_node_put
  ...

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

@@ -441,7 +441,7 @@ EXAMPLE:
 		regmap = <&snvs>;
 		interrupts = <0 4 0x4>
 	        linux,keycode = <116>; /* KEY_POWER */
-		wakeup;
+		wakeup-source;
 	};
 
 =====================================================================
@@ -530,7 +530,7 @@ FULL EXAMPLE
 			regmap = <&sec_mon>;
 			interrupts = <0 4 0x4>;
 			linux,keycode = <116>; /* KEY_POWER */
-			wakeup;
+			wakeup-source;
 		};
 	};
 

Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt → Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt

@@ -14,8 +14,8 @@ Required properties:
 -port@[X]: SoC specific port nodes with endpoint definitions as defined
    in Documentation/devicetree/bindings/media/video-interfaces.txt,
    please refer to the SoC specific binding document:
-    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
-    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+    * Documentation/devicetree/bindings/display/imx/hdmi.txt
+    * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
 
 Optional properties
 - reg-io-width: the width of the reg:1,4, default set to 1 if not present

Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt → Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/video/display-timing.txt.
+              Documentation/devicetree/bindings/display/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required

Documentation/devicetree/bindings/video/exynos7-decon.txt → Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 
 Example:
 

Documentation/devicetree/bindings/video/exynos_dp.txt → Documentation/devicetree/bindings/display/exynos/exynos_dp.txt

@@ -50,7 +50,7 @@ Required properties for dp-controller:
 		number of lanes supported by the panel.
 			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
 	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/video/display-timing.txt
+		Documentation/devicetree/bindings/display/display-timing.txt
 
 Optional properties for dp-controller:
 	-interlaced:

Documentation/devicetree/bindings/video/exynos_dsim.txt → Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -49,7 +49,7 @@ Video interfaces:
       mode
     - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
 
-[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/video/samsung-fimd.txt → Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -82,7 +82,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/video/fsl,imx-fb.txt → Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/video/display-timing.txt
+	Documentation/devicetree/bindings/display/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value

Documentation/devicetree/bindings/drm/imx/ldb.txt → Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -63,7 +63,7 @@ Required properties:
 
 Optional properties (required if display-timings are used):
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/video/display-timing.txt.
+   Documentation/devicetree/bindings/display/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.

Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt

@@ -0,0 +1,34 @@
+PXA LCD Controller
+------------------
+
+Required properties:
+ - compatible : one of these
+	"marvell,pxa2xx-lcdc",
+	"marvell,pxa270-lcdc",
+	"marvell,pxa300-lcdc"
+ - reg : should contain 1 register range (address and length).
+ - interrupts : framebuffer controller interrupt.
+ - clocks: phandle to input clocks
+
+Required nodes:
+ - port: connection to the LCD panel (see video-interfaces.txt)
+	 This node must have its properties bus-width and remote-endpoint set.
+	 If the panel is not a TFT color panel, then a "lcd-type" property in
+	 the panel should specify the panel type.
+	 This panel node should be in the board dts.
+
+Example:
+	lcd-controller@40500000 {
+		compatible = "marvell,pxa2xx-lcdc";
+		reg = <0x44000000 0x10000>;
+		interrupts = <17>;
+		clocks = <&clks CLK_LCD>;
+		status = "okay";
+
+		port {
+			lcdc_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				bus-width = <16>;
+			};
+		};
+	};

Documentation/devicetree/bindings/drm/msm/dsi.txt → Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -28,7 +28,7 @@ Required properties:
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
-  See files in Documentation/devicetree/bindings/panel/ for each supported
+  See files in Documentation/devicetree/bindings/display/panel/ for each supported
   panel.
 - qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
   driving a panel which needs 2 DSI links.

Documentation/devicetree/bindings/video/panel-dpi.txt → Documentation/devicetree/bindings/display/panel/panel-dpi.txt

@@ -10,7 +10,7 @@ Optional properties:
 
 Required nodes:
 - "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/video/display-timing.txt)
+  (Documentation/devicetree/bindings/display/display-timing.txt)
 - Video port for DPI input
 
 Example

Documentation/devicetree/bindings/panel/samsung,ld9040.txt → Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt

@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 

Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt → Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt

@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/video/rockchip-drm.txt → Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt

@@ -9,7 +9,7 @@ Required properties:
 - compatible: Should be "rockchip,display-subsystem"
 - ports: Should contain a list of phandles pointing to display interface port
   of vop devices. vop definitions as defined in
-  Documentation/devicetree/bindings/video/rockchip-vop.txt
+  Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
 
 example:
 

Documentation/devicetree/bindings/gpu/st,stih4xx.txt → Documentation/devicetree/bindings/display/st,stih4xx.txt

@@ -61,7 +61,7 @@ STMicroelectronics stih4xx platforms
   - reg-names: names of the mapped memory regions listed in regs property in
     the same order.
   - interrupts : HDMI interrupt number to the CPU.
-  - interrupt-names: name of the interrupts listed in interrupts property in
+  - interrupt-names: names of the interrupts listed in interrupts property in
     the same order
   - clocks: from common clock binding: handle hardware IP needed clocks, the
     number of clocks may depend of the SoC type.
@@ -95,7 +95,7 @@ sti-dvo:
   - clock-names: names of the clocks listed in clocks property in the same
     order.
   - pinctrl-0: pin control handle
-  - pinctrl-name: names of the pin control to use
+  - pinctrl-names: names of the pin control states to use
   - sti,panel: phandle of the panel connected to the DVO output
 
 sti-hqvdp: