drm/amd/display: Add CRC support for DCN

[Why]
Regamma/CTM tests require CRC support

[How]
The CRC registers that were used in DCE exist under different
names in DCN.  The code was copied from DCE (in
dc/dce110/dce110_timing_generator.c) into DCN, and changed to
use the DCN register access helper functions.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c

@@ -1324,6 +1324,72 @@ bool optc1_is_optc_underflow_occurred(struct timing_generator *optc)
 	return (underflow_occurred == 1);
 }
 
+bool optc1_configure_crc(struct timing_generator *optc,
+			  const struct crc_params *params)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	/* Cannot configure crc on a CRTC that is disabled */
+	if (!optc1_is_tg_enabled(optc))
+		return false;
+
+	REG_WRITE(OTG_CRC_CNTL, 0);
+
+	if (!params->enable)
+		return true;
+
+	/* Program frame boundaries */
+	/* Window A x axis start and end. */
+	REG_UPDATE_2(OTG_CRC0_WINDOWA_X_CONTROL,
+			OTG_CRC0_WINDOWA_X_START, params->windowa_x_start,
+			OTG_CRC0_WINDOWA_X_END, params->windowa_x_end);
+
+	/* Window A y axis start and end. */
+	REG_UPDATE_2(OTG_CRC0_WINDOWA_Y_CONTROL,
+			OTG_CRC0_WINDOWA_Y_START, params->windowa_y_start,
+			OTG_CRC0_WINDOWA_Y_END, params->windowa_y_end);
+
+	/* Window B x axis start and end. */
+	REG_UPDATE_2(OTG_CRC0_WINDOWB_X_CONTROL,
+			OTG_CRC0_WINDOWB_X_START, params->windowb_x_start,
+			OTG_CRC0_WINDOWB_X_END, params->windowb_x_end);
+
+	/* Window B y axis start and end. */
+	REG_UPDATE_2(OTG_CRC0_WINDOWB_Y_CONTROL,
+			OTG_CRC0_WINDOWB_Y_START, params->windowb_y_start,
+			OTG_CRC0_WINDOWB_Y_END, params->windowb_y_end);
+
+	/* Set crc mode and selection, and enable. Only using CRC0*/
+	REG_UPDATE_3(OTG_CRC_CNTL,
+			OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+			OTG_CRC0_SELECT, params->selection,
+			OTG_CRC_EN, 1);
+
+	return true;
+}
+
+bool optc1_get_crc(struct timing_generator *optc,
+		    uint32_t *r_cr, uint32_t *g_y, uint32_t *b_cb)
+{
+	uint32_t field = 0;
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	REG_GET(OTG_CRC_CNTL, OTG_CRC_EN, &field);
+
+	/* Early return if CRC is not enabled for this CRTC */
+	if (!field)
+		return false;
+
+	REG_GET_2(OTG_CRC0_DATA_RG,
+			CRC0_R_CR, r_cr,
+			CRC0_G_Y, g_y);
+
+	REG_GET(OTG_CRC0_DATA_B,
+			CRC0_B_CB, b_cb);
+
+	return true;
+}
+
 static const struct timing_generator_funcs dcn10_tg_funcs = {
 		.validate_timing = optc1_validate_timing,
 		.program_timing = optc1_program_timing,
@@ -1360,6 +1426,8 @@ static const struct timing_generator_funcs dcn10_tg_funcs = {
 		.is_tg_enabled = optc1_is_tg_enabled,
 		.is_optc_underflow_occurred = optc1_is_optc_underflow_occurred,
 		.clear_optc_underflow = optc1_clear_optc_underflow,
+		.get_crc = optc1_get_crc,
+		.configure_crc = optc1_configure_crc,
 };
 
 void dcn10_timing_generator_init(struct optc *optc1)

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h

@@ -75,7 +75,14 @@
 	SRI(CONTROL, VTG, inst),\
 	SRI(OTG_VERT_SYNC_CONTROL, OTG, inst),\
 	SRI(OTG_MASTER_UPDATE_MODE, OTG, inst),\
-	SRI(OTG_GSL_CONTROL, OTG, inst)
+	SRI(OTG_GSL_CONTROL, OTG, inst),\
+	SRI(OTG_CRC_CNTL, OTG, inst),\
+	SRI(OTG_CRC0_DATA_RG, OTG, inst),\
+	SRI(OTG_CRC0_DATA_B, OTG, inst),\
+	SRI(OTG_CRC0_WINDOWA_X_CONTROL, OTG, inst),\
+	SRI(OTG_CRC0_WINDOWA_Y_CONTROL, OTG, inst),\
+	SRI(OTG_CRC0_WINDOWB_X_CONTROL, OTG, inst),\
+	SRI(OTG_CRC0_WINDOWB_Y_CONTROL, OTG, inst)
 
 #define TG_COMMON_REG_LIST_DCN1_0(inst) \
 	TG_COMMON_REG_LIST_DCN(inst),\
@@ -138,6 +145,13 @@ struct dcn_optc_registers {
 	uint32_t OTG_GSL_WINDOW_X;
 	uint32_t OTG_GSL_WINDOW_Y;
 	uint32_t OTG_VUPDATE_KEEPOUT;
+	uint32_t OTG_CRC_CNTL;
+	uint32_t OTG_CRC0_DATA_RG;
+	uint32_t OTG_CRC0_DATA_B;
+	uint32_t OTG_CRC0_WINDOWA_X_CONTROL;
+	uint32_t OTG_CRC0_WINDOWA_Y_CONTROL;
+	uint32_t OTG_CRC0_WINDOWB_X_CONTROL;
+	uint32_t OTG_CRC0_WINDOWB_Y_CONTROL;
 };
 
 #define TG_COMMON_MASK_SH_LIST_DCN(mask_sh)\
@@ -232,7 +246,21 @@ struct dcn_optc_registers {
 	SF(OTG0_OTG_GSL_CONTROL, OTG_GSL2_EN, mask_sh),\
 	SF(OTG0_OTG_GSL_CONTROL, OTG_GSL_MASTER_EN, mask_sh),\
 	SF(OTG0_OTG_GSL_CONTROL, OTG_GSL_FORCE_DELAY, mask_sh),\
-	SF(OTG0_OTG_GSL_CONTROL, OTG_GSL_CHECK_ALL_FIELDS, mask_sh)
+	SF(OTG0_OTG_GSL_CONTROL, OTG_GSL_CHECK_ALL_FIELDS, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL, OTG_CRC_CONT_EN, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL, OTG_CRC0_SELECT, mask_sh),\
+	SF(OTG0_OTG_CRC_CNTL, OTG_CRC_EN, mask_sh),\
+	SF(OTG0_OTG_CRC0_DATA_RG, CRC0_R_CR, mask_sh),\
+	SF(OTG0_OTG_CRC0_DATA_RG, CRC0_G_Y, mask_sh),\
+	SF(OTG0_OTG_CRC0_DATA_B, CRC0_B_CB, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWA_X_CONTROL, OTG_CRC0_WINDOWA_X_START, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWA_X_CONTROL, OTG_CRC0_WINDOWA_X_END, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWA_Y_CONTROL, OTG_CRC0_WINDOWA_Y_START, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWA_Y_CONTROL, OTG_CRC0_WINDOWA_Y_END, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWB_X_CONTROL, OTG_CRC0_WINDOWB_X_START, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWB_X_CONTROL, OTG_CRC0_WINDOWB_X_END, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWB_Y_CONTROL, OTG_CRC0_WINDOWB_Y_START, mask_sh),\
+	SF(OTG0_OTG_CRC0_WINDOWB_Y_CONTROL, OTG_CRC0_WINDOWB_Y_END, mask_sh)
 
 
 #define TG_COMMON_MASK_SH_LIST_DCN1_0(mask_sh)\
@@ -363,7 +391,22 @@ struct dcn_optc_registers {
 	type OTG_MASTER_UPDATE_LOCK_GSL_EN;\
 	type MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_START_OFFSET;\
 	type MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_END_OFFSET;\
-	type OTG_MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_EN;
+	type OTG_MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_EN;\
+	type OTG_CRC_CONT_EN;\
+	type OTG_CRC0_SELECT;\
+	type OTG_CRC_EN;\
+	type CRC0_R_CR;\
+	type CRC0_G_Y;\
+	type CRC0_B_CB;\
+	type OTG_CRC0_WINDOWA_X_START;\
+	type OTG_CRC0_WINDOWA_X_END;\
+	type OTG_CRC0_WINDOWA_Y_START;\
+	type OTG_CRC0_WINDOWA_Y_END;\
+	type OTG_CRC0_WINDOWB_X_START;\
+	type OTG_CRC0_WINDOWB_X_END;\
+	type OTG_CRC0_WINDOWB_Y_START;\
+	type OTG_CRC0_WINDOWB_Y_END;
+
 
 #define TG_REG_FIELD_LIST(type) \
 	TG_REG_FIELD_LIST_DCN1_0(type)