iwlwifi: change the default behavior of watchdog timer

The current default watchdog timer is enabled, but we are seeing issues on
legacy devices. So change the default setting of watchdog timer to per
device based. But user still can use the "wd_disable" module parameter
to overwrite the system setting

Cc: stable@vger.kernel.org #3.0+
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -191,6 +191,7 @@ static struct iwl_base_params iwl1000_base_params = {
 	.chain_noise_scale = 1000,
 	.wd_timeout = IWL_DEF_WD_TIMEOUT,
 	.max_event_log_size = 128,
+	.wd_disable = true,
 };
 static struct iwl_ht_params iwl1000_ht_params = {
 	.ht_greenfield_support = true,

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -364,6 +364,7 @@ static struct iwl_base_params iwl5000_base_params = {
 	.wd_timeout = IWL_LONG_WD_TIMEOUT,
 	.max_event_log_size = 512,
 	.no_idle_support = true,
+	.wd_disable = true,
 };
 static struct iwl_ht_params iwl5000_ht_params = {
 	.ht_greenfield_support = true,

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -3498,9 +3498,10 @@ MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
 module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
 MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
 
-module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO);
+module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO);
 MODULE_PARM_DESC(wd_disable,
-		"Disable stuck queue watchdog timer (default: 0 [enabled])");
+		"Disable stuck queue watchdog timer 0=system default, "
+		"1=disable, 2=enable (default: 0)");
 
 /*
  * set bt_coex_active to true, uCode will do kill/defer

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -1810,11 +1810,23 @@ void iwl_setup_watchdog(struct iwl_priv *priv)
 {
 	unsigned int timeout = priv->cfg->base_params->wd_timeout;
 
-	if (timeout && !iwlagn_mod_params.wd_disable)
-		mod_timer(&priv->watchdog,
-			  jiffies + msecs_to_jiffies(IWL_WD_TICK(timeout)));
-	else
-		del_timer(&priv->watchdog);
+	if (!iwlagn_mod_params.wd_disable) {
+		/* use system default */
+		if (timeout && !priv->cfg->base_params->wd_disable)
+			mod_timer(&priv->watchdog,
+				jiffies +
+				msecs_to_jiffies(IWL_WD_TICK(timeout)));
+		else
+			del_timer(&priv->watchdog);
+	} else {
+		/* module parameter overwrite default configuration */
+		if (timeout && iwlagn_mod_params.wd_disable == 2)
+			mod_timer(&priv->watchdog,
+				jiffies +
+				msecs_to_jiffies(IWL_WD_TICK(timeout)));
+		else
+			del_timer(&priv->watchdog);
+	}
 }
 
 /**

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -113,6 +113,7 @@ struct iwl_lib_ops {
  * @shadow_reg_enable: HW shadhow register bit
  * @no_idle_support: do not support idle mode
  * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
+ * wd_disable: disable watchdog timer
  */
 struct iwl_base_params {
 	int eeprom_size;
@@ -134,6 +135,7 @@ struct iwl_base_params {
 	const bool shadow_reg_enable;
 	const bool no_idle_support;
 	const bool hd_v2;
+	const bool wd_disable;
 };
 /*
  * @advanced_bt_coexist: support advanced bt coexist

drivers/net/wireless/iwlwifi/iwl-shared.h

@@ -120,7 +120,7 @@ extern struct iwl_mod_params iwlagn_mod_params;
  * @restart_fw: restart firmware, default = 1
  * @plcp_check: enable plcp health check, default = true
  * @ack_check: disable ack health check, default = false
- * @wd_disable: enable stuck queue check, default = false
+ * @wd_disable: enable stuck queue check, default = 0
  * @bt_coex_active: enable bt coex, default = true
  * @led_mode: system default, default = 0
  * @no_sleep_autoadjust: disable autoadjust, default = true
@@ -141,7 +141,7 @@ struct iwl_mod_params {
 	int restart_fw;
 	bool plcp_check;
 	bool ack_check;
-	bool wd_disable;
+	int  wd_disable;
 	bool bt_coex_active;
 	int led_mode;
 	bool no_sleep_autoadjust;