arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller

The interrupt-map property used in the description of the Marvell
Armada 7K/8K PCIe controllers has a bogus extraneous 0 that causes the
interrupt conversion to not be done properly. This causes the PCIe PME
and AER root port service drivers to fail their initialization:

[    5.019900] genirq: Setting trigger mode 7 for irq 114 failed (irq_chip_set_type_parent+0x0/0x30)
[    5.028821] pcie_pme: probe of 0001:00:00.0:pcie001 failed with error -22
[    5.035687] genirq: Setting trigger mode 7 for irq 114 failed (irq_chip_set_type_parent+0x0/0x30)
[    5.044614] aer: probe of 0001:00:00.0:pcie002 failed with error -22

This problem was introduced when the interrupt description was
switched from using the GIC directly to using the ICU interrupt
controller. Indeed, the GIC has address-cells = <1>, which requires a
parent unit address, while the ICU has address-cells = <0>.

Fixes: 6ef84a827c37 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -336,7 +336,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
 			clocks = <&cpm_clk 1 13>;
@@ -362,7 +362,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf7000000 0  0xf7000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
@@ -389,7 +389,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf8000000 0  0xf8000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -335,7 +335,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
 			clocks = <&cps_clk 1 13>;
@@ -361,7 +361,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
@@ -388,7 +388,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;