|
@@ -291,11 +291,12 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
|
|
* chips/cards need an interface voltage rail too.
|
|
* chips/cards need an interface voltage rail too.
|
|
*/
|
|
*/
|
|
if (power_on) {
|
|
if (power_on) {
|
|
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
|
|
|
|
|
|
+ if (host->vcc)
|
|
|
|
+ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
|
|
/* Enable interface voltage rail, if needed */
|
|
/* Enable interface voltage rail, if needed */
|
|
if (ret == 0 && host->vcc_aux) {
|
|
if (ret == 0 && host->vcc_aux) {
|
|
ret = regulator_enable(host->vcc_aux);
|
|
ret = regulator_enable(host->vcc_aux);
|
|
- if (ret < 0)
|
|
|
|
|
|
+ if (ret < 0 && host->vcc)
|
|
ret = mmc_regulator_set_ocr(host->mmc,
|
|
ret = mmc_regulator_set_ocr(host->mmc,
|
|
host->vcc, 0);
|
|
host->vcc, 0);
|
|
}
|
|
}
|
|
@@ -303,7 +304,7 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
|
|
/* Shut down the rail */
|
|
/* Shut down the rail */
|
|
if (host->vcc_aux)
|
|
if (host->vcc_aux)
|
|
ret = regulator_disable(host->vcc_aux);
|
|
ret = regulator_disable(host->vcc_aux);
|
|
- if (!ret) {
|
|
|
|
|
|
+ if (host->vcc) {
|
|
/* Then proceed to shut down the local regulator */
|
|
/* Then proceed to shut down the local regulator */
|
|
ret = mmc_regulator_set_ocr(host->mmc,
|
|
ret = mmc_regulator_set_ocr(host->mmc,
|
|
host->vcc, 0);
|
|
host->vcc, 0);
|
|
@@ -323,10 +324,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
|
|
|
|
|
reg = devm_regulator_get(host->dev, "vmmc");
|
|
reg = devm_regulator_get(host->dev, "vmmc");
|
|
if (IS_ERR(reg)) {
|
|
if (IS_ERR(reg)) {
|
|
- dev_err(host->dev, "vmmc regulator missing\n");
|
|
|
|
|
|
+ dev_err(host->dev, "unable to get vmmc regulator %ld\n",
|
|
|
|
+ PTR_ERR(reg));
|
|
return PTR_ERR(reg);
|
|
return PTR_ERR(reg);
|
|
} else {
|
|
} else {
|
|
- mmc_slot(host).set_power = omap_hsmmc_set_power;
|
|
|
|
host->vcc = reg;
|
|
host->vcc = reg;
|
|
ocr_value = mmc_regulator_get_ocrmask(reg);
|
|
ocr_value = mmc_regulator_get_ocrmask(reg);
|
|
if (!mmc_slot(host).ocr_mask) {
|
|
if (!mmc_slot(host).ocr_mask) {
|
|
@@ -339,31 +340,26 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
|
return -EINVAL;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
+ }
|
|
|
|
+ mmc_slot(host).set_power = omap_hsmmc_set_power;
|
|
|
|
|
|
- /* Allow an aux regulator */
|
|
|
|
- reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
|
|
|
|
- host->vcc_aux = IS_ERR(reg) ? NULL : reg;
|
|
|
|
|
|
+ /* Allow an aux regulator */
|
|
|
|
+ reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
|
|
|
|
+ host->vcc_aux = IS_ERR(reg) ? NULL : reg;
|
|
|
|
|
|
- /* For eMMC do not power off when not in sleep state */
|
|
|
|
- if (mmc_slot(host).no_regulator_off_init)
|
|
|
|
- return 0;
|
|
|
|
- /*
|
|
|
|
- * UGLY HACK: workaround regulator framework bugs.
|
|
|
|
- * When the bootloader leaves a supply active, it's
|
|
|
|
- * initialized with zero usecount ... and we can't
|
|
|
|
- * disable it without first enabling it. Until the
|
|
|
|
- * framework is fixed, we need a workaround like this
|
|
|
|
- * (which is safe for MMC, but not in general).
|
|
|
|
- */
|
|
|
|
- if (regulator_is_enabled(host->vcc) > 0 ||
|
|
|
|
- (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
|
|
|
|
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
|
|
|
|
|
|
+ /* For eMMC do not power off when not in sleep state */
|
|
|
|
+ if (mmc_slot(host).no_regulator_off_init)
|
|
|
|
+ return 0;
|
|
|
|
+ /*
|
|
|
|
+ * To disable boot_on regulator, enable regulator
|
|
|
|
+ * to increase usecount and then disable it.
|
|
|
|
+ */
|
|
|
|
+ if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
|
|
|
|
+ (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
|
|
|
|
+ int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
|
|
|
|
|
|
- mmc_slot(host).set_power(host->dev, host->slot_id,
|
|
|
|
- 1, vdd);
|
|
|
|
- mmc_slot(host).set_power(host->dev, host->slot_id,
|
|
|
|
- 0, 0);
|
|
|
|
- }
|
|
|
|
|
|
+ mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
|
|
|
|
+ mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
|
|
}
|
|
}
|
|
|
|
|
|
return 0;
|
|
return 0;
|