|
@@ -20,7 +20,9 @@
|
|
*
|
|
*
|
|
* - starting_index_kind is one of the following, depending on the event:
|
|
* - starting_index_kind is one of the following, depending on the event:
|
|
*
|
|
*
|
|
- * chip_id: hardware chip id or -1 for current hw chip
|
|
|
|
|
|
+ * hw_chip_id: hardware chip id or -1 for current hw chip
|
|
|
|
+ * partition_id
|
|
|
|
+ * sibling_part_id,
|
|
* phys_processor_idx:
|
|
* phys_processor_idx:
|
|
* 0xffffffffffffffff: or -1, which means it is irrelavant for the event
|
|
* 0xffffffffffffffff: or -1, which means it is irrelavant for the event
|
|
*
|
|
*
|
|
@@ -63,6 +65,33 @@ REQUEST(__count(0, 8, processor_time_in_timebase_cycles)
|
|
)
|
|
)
|
|
#include I(REQUEST_END)
|
|
#include I(REQUEST_END)
|
|
|
|
|
|
|
|
+#define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition
|
|
|
|
+#define REQUEST_NUM 0x20
|
|
|
|
+#define REQUEST_IDX_KIND "sibling_part_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 8, partition_id)
|
|
|
|
+ __count(0x8, 8, entitled_cycles)
|
|
|
|
+ __count(0x10, 8, consumed_capped_cycles)
|
|
|
|
+ __count(0x18, 8, consumed_uncapped_cycles)
|
|
|
|
+ __count(0x20, 8, cycles_donated)
|
|
|
|
+ __count(0x28, 8, purr_idle_cycles)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Not available for counter_info_version >= 0x8, use
|
|
|
|
+ * run_instruction_cycles_by_partition(0x100) instead.
|
|
|
|
+ */
|
|
|
|
+#define REQUEST_NAME run_instructions_run_cycles_by_partition
|
|
|
|
+#define REQUEST_NUM 0x30
|
|
|
|
+#define REQUEST_IDX_KIND "sibling_part_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 8, partition_id)
|
|
|
|
+ __count(0x8, 8, instructions_completed)
|
|
|
|
+ __count(0x10, 8, cycles)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
#define REQUEST_NAME system_performance_capabilities
|
|
#define REQUEST_NAME system_performance_capabilities
|
|
#define REQUEST_NUM 0x40
|
|
#define REQUEST_NUM 0x40
|
|
#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
|
|
#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
|
|
@@ -73,4 +102,160 @@ REQUEST(__field(0, 1, perf_collect_privileged)
|
|
)
|
|
)
|
|
#include I(REQUEST_END)
|
|
#include I(REQUEST_END)
|
|
|
|
|
|
|
|
+#define REQUEST_NAME processor_bus_utilization_abc_links
|
|
|
|
+#define REQUEST_NUM 0x50
|
|
|
|
+#define REQUEST_IDX_KIND "hw_chip_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 4, hw_chip_id)
|
|
|
|
+ __array(0x4, 0xC, reserved1)
|
|
|
|
+ __count(0x10, 8, total_link_cycles)
|
|
|
|
+ __count(0x18, 8, idle_cycles_for_a_link)
|
|
|
|
+ __count(0x20, 8, idle_cycles_for_b_link)
|
|
|
|
+ __count(0x28, 8, idle_cycles_for_c_link)
|
|
|
|
+ __array(0x30, 0x20, reserved2)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME processor_bus_utilization_wxyz_links
|
|
|
|
+#define REQUEST_NUM 0x60
|
|
|
|
+#define REQUEST_IDX_KIND "hw_chip_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 4, hw_chip_id)
|
|
|
|
+ __array(0x4, 0xC, reserved1)
|
|
|
|
+ __count(0x10, 8, total_link_cycles)
|
|
|
|
+ __count(0x18, 8, idle_cycles_for_w_link)
|
|
|
|
+ __count(0x20, 8, idle_cycles_for_x_link)
|
|
|
|
+ __count(0x28, 8, idle_cycles_for_y_link)
|
|
|
|
+ __count(0x30, 8, idle_cycles_for_z_link)
|
|
|
|
+ __array(0x38, 0x28, reserved2)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME processor_bus_utilization_gx_links
|
|
|
|
+#define REQUEST_NUM 0x70
|
|
|
|
+#define REQUEST_IDX_KIND "hw_chip_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 4, hw_chip_id)
|
|
|
|
+ __array(0x4, 0xC, reserved1)
|
|
|
|
+ __count(0x10, 8, gx0_in_address_cycles)
|
|
|
|
+ __count(0x18, 8, gx0_in_data_cycles)
|
|
|
|
+ __count(0x20, 8, gx0_in_retries)
|
|
|
|
+ __count(0x28, 8, gx0_in_bus_cycles)
|
|
|
|
+ __count(0x30, 8, gx0_in_cycles_total)
|
|
|
|
+ __count(0x38, 8, gx0_out_address_cycles)
|
|
|
|
+ __count(0x40, 8, gx0_out_data_cycles)
|
|
|
|
+ __count(0x48, 8, gx0_out_retries)
|
|
|
|
+ __count(0x50, 8, gx0_out_bus_cycles)
|
|
|
|
+ __count(0x58, 8, gx0_out_cycles_total)
|
|
|
|
+ __count(0x60, 8, gx1_in_address_cycles)
|
|
|
|
+ __count(0x68, 8, gx1_in_data_cycles)
|
|
|
|
+ __count(0x70, 8, gx1_in_retries)
|
|
|
|
+ __count(0x78, 8, gx1_in_bus_cycles)
|
|
|
|
+ __count(0x80, 8, gx1_in_cycles_total)
|
|
|
|
+ __count(0x88, 8, gx1_out_address_cycles)
|
|
|
|
+ __count(0x90, 8, gx1_out_data_cycles)
|
|
|
|
+ __count(0x98, 8, gx1_out_retries)
|
|
|
|
+ __count(0xA0, 8, gx1_out_bus_cycles)
|
|
|
|
+ __count(0xA8, 8, gx1_out_cycles_total)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME processor_bus_utilization_mc_links
|
|
|
|
+#define REQUEST_NUM 0x80
|
|
|
|
+#define REQUEST_IDX_KIND "hw_chip_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 4, hw_chip_id)
|
|
|
|
+ __array(0x4, 0xC, reserved1)
|
|
|
|
+ __count(0x10, 8, mc0_frames)
|
|
|
|
+ __count(0x18, 8, mc0_reads)
|
|
|
|
+ __count(0x20, 8, mc0_write)
|
|
|
|
+ __count(0x28, 8, mc0_total_cycles)
|
|
|
|
+ __count(0x30, 8, mc1_frames)
|
|
|
|
+ __count(0x38, 8, mc1_reads)
|
|
|
|
+ __count(0x40, 8, mc1_writes)
|
|
|
|
+ __count(0x48, 8, mc1_total_cycles)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+/* Processor_config (0x90) skipped, no counters */
|
|
|
|
+/* Current_processor_frequency (0x91) skipped, no counters */
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME processor_core_utilization
|
|
|
|
+#define REQUEST_NUM 0x94
|
|
|
|
+#define REQUEST_IDX_KIND "phys_processor_idx=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 4, phys_processor_idx)
|
|
|
|
+ __field(0x4, 4, hw_processor_id)
|
|
|
|
+ __count(0x8, 8, cycles_across_any_thread)
|
|
|
|
+ __count(0x10, 8, timebase_at_collection)
|
|
|
|
+ __count(0x18, 8, purr_cycles)
|
|
|
|
+ __count(0x20, 8, sum_of_cycles_across_all_threads)
|
|
|
|
+ __count(0x28, 8, instructions_completed)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+/* Processor_core_power_mode (0x95) skipped, no counters */
|
|
|
|
+/* Affinity_domain_information_by_virtual_processor (0xA0) skipped,
|
|
|
|
+ * no counters */
|
|
|
|
+/* Affinity_domain_information_by_domain (0xB0) skipped, no counters */
|
|
|
|
+/* Affinity_domain_information_by_partition (0xB1) skipped, no counters */
|
|
|
|
+/* Physical_memory_info (0xC0) skipped, no counters */
|
|
|
|
+/* Processor_bus_topology (0xD0) skipped, no counters */
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME partition_hypervisor_queuing_times
|
|
|
|
+#define REQUEST_NUM 0xE0
|
|
|
|
+#define REQUEST_IDX_KIND "partition_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 2, partition_id)
|
|
|
|
+ __array(0x2, 6, reserved1)
|
|
|
|
+ __count(0x8, 8, time_waiting_for_entitlement)
|
|
|
|
+ __count(0x10, 8, times_waited_for_entitlement)
|
|
|
|
+ __count(0x18, 8, time_waiting_for_phys_processor)
|
|
|
|
+ __count(0x20, 8, times_waited_for_phys_processor)
|
|
|
|
+ __count(0x28, 8, dispatches_on_home_core)
|
|
|
|
+ __count(0x30, 8, dispatches_on_home_primary_affinity_domain)
|
|
|
|
+ __count(0x38, 8, dispatches_on_home_secondary_affinity_domain)
|
|
|
|
+ __count(0x40, 8, dispatches_off_home_secondary_affinity_domain)
|
|
|
|
+ __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME system_hypervisor_times
|
|
|
|
+#define REQUEST_NUM 0xF0
|
|
|
|
+#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors)
|
|
|
|
+ __count(0x8, 8, time_spent_processing_virtual_processor_timers)
|
|
|
|
+ __count(0x10, 8, time_spent_managing_partitions_over_entitlement)
|
|
|
|
+ __count(0x18, 8, time_spent_on_system_management)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME system_tlbie_count_and_time
|
|
|
|
+#define REQUEST_NUM 0xF4
|
|
|
|
+#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__count(0, 8, tlbie_instructions_issued)
|
|
|
|
+ /*
|
|
|
|
+ * FIXME: The spec says the offset here is 0x10, which I suspect
|
|
|
|
+ * is wrong.
|
|
|
|
+ */
|
|
|
|
+ __count(0x8, 8, time_spent_issuing_tlbies)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+#define REQUEST_NAME partition_instruction_count_and_time
|
|
|
|
+#define REQUEST_NUM 0x100
|
|
|
|
+#define REQUEST_IDX_KIND "partition_id=?"
|
|
|
|
+#include I(REQUEST_BEGIN)
|
|
|
|
+REQUEST(__field(0, 2, partition_id)
|
|
|
|
+ __array(0x2, 0x6, reserved1)
|
|
|
|
+ __count(0x8, 8, instructions_performed)
|
|
|
|
+ __count(0x10, 8, time_collected)
|
|
|
|
+)
|
|
|
|
+#include I(REQUEST_END)
|
|
|
|
+
|
|
|
|
+/* set_mmcrh (0x80001000) skipped, no counters */
|
|
|
|
+/* retrieve_hpmcx (0x80002000) skipped, no counters */
|
|
|
|
+
|
|
#include "req-gen/_end.h"
|
|
#include "req-gen/_end.h"
|