Merge branch 'bfin_rotary' into next

Merge bfin_rotary driver changes from Sonic Zhang.

.mailmap

@@ -73,6 +73,7 @@ Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>
 Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
+Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>

Documentation/ABI/testing/sysfs-class-mei

@@ -14,3 +14,18 @@ Description:
 		The /sys/class/mei/meiN directory is created for
 		each probed mei device
 
+What:		/sys/class/mei/meiN/fw_status
+Date:		Nov 2014
+KernelVersion:	3.19
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display fw status registers content
+
+		The ME FW writes its status information into fw status
+		registers for BIOS and OS to monitor fw health.
+
+		The register contains running state, power management
+		state, error codes, and others. The way the registers
+		are decoded depends on PCH or SoC generation.
+		Also number of registers varies between 1 and 6
+		depending on generation.
+

Documentation/ABI/testing/sysfs-platform-dell-laptop

@@ -1,60 +0,0 @@
-What:		/sys/class/leds/dell::kbd_backlight/als_setting
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to control the automatic keyboard
-		illumination mode on some systems that have an ambient
-		light sensor. Write 1 to this file to enable the auto
-		mode, 0 to disable it.
-
-What:		/sys/class/leds/dell::kbd_backlight/start_triggers
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to control the input triggers that
-		turn on the keyboard backlight illumination that is
-		disabled because of inactivity.
-		Read the file to see the triggers available. The ones
-		enabled are preceded by '+', those disabled by '-'.
-
-		To enable a trigger, write its name preceded by '+' to
-		this file. To disable a trigger, write its name preceded
-		by '-' instead.
-
-		For example, to enable the keyboard as trigger run:
-		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-		To disable it:
-		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-
-		Note that not all the available triggers can be configured.
-
-What:		/sys/class/leds/dell::kbd_backlight/stop_timeout
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to specify the interval after which the
-		keyboard illumination is disabled because of inactivity.
-		The timeouts are expressed in seconds, minutes, hours and
-		days, for which the symbols are 's', 'm', 'h' and 'd'
-		respectively.
-
-		To configure the timeout, write to this file a value along
-		with any the above units. If no unit is specified, the value
-		is assumed to be expressed in seconds.
-
-		For example, to set the timeout to 10 minutes run:
-		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
-
-		Note that when this file is read, the returned value might be
-		expressed in a different unit than the one used when the timeout
-		was set.
-
-		Also note that only some timeouts are supported and that
-		some systems might fall back to a specific timeout in case
-		an invalid timeout is written to this file.

Documentation/devicetree/bindings/arm/arm-boards

@@ -23,7 +23,7 @@ Required nodes:
     range of 0x200 bytes.
 
 - syscon: the root node of the Integrator platforms must have a
-  system controller node pointong to the control registers,
+  system controller node pointing to the control registers,
   with the compatible string
   "arm,integrator-ap-syscon"
   "arm,integrator-cp-syscon"

Documentation/devicetree/bindings/arm/fw-cfg.txt

@@ -0,0 +1,72 @@
+* QEMU Firmware Configuration bindings for ARM
+
+QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
+provide the following Firmware Configuration interface on the "virt" machine
+type:
+
+- A write-only, 16-bit wide selector (or control) register,
+- a read-write, 64-bit wide data register.
+
+QEMU exposes the control and data register to ARM guests as memory mapped
+registers; their location is communicated to the guest's UEFI firmware in the
+DTB that QEMU places at the bottom of the guest's DRAM.
+
+The guest writes a selector value (a key) to the selector register, and then
+can read the corresponding data (produced by QEMU) via the data register. If
+the selected entry is writable, the guest can rewrite it through the data
+register.
+
+The selector register takes keys in big endian byte order.
+
+The data register allows accesses with 8, 16, 32 and 64-bit width (only at
+offset 0 of the register). Accesses larger than a byte are interpreted as
+arrays, bundled together only for better performance. The bytes constituting
+such a word, in increasing address order, correspond to the bytes that would
+have been transferred by byte-wide accesses in chronological order.
+
+The interface allows guest firmware to download various parameters and blobs
+that affect how the firmware works and what tables it installs for the guest
+OS. For example, boot order of devices, ACPI tables, SMBIOS tables, kernel and
+initrd images for direct kernel booting, virtual machine UUID, SMP information,
+virtual NUMA topology, and so on.
+
+The authoritative registry of the valid selector values and their meanings is
+the QEMU source code; the structure of the data blobs corresponding to the
+individual key values is also defined in the QEMU source code.
+
+The presence of the registers can be verified by selecting the "signature" blob
+with key 0x0000, and reading four bytes from the data register. The returned
+signature is "QEMU".
+
+The outermost protocol (involving the write / read sequences of the control and
+data registers) is expected to be versioned, and/or described by feature bits.
+The interface revision / feature bitmap can be retrieved with key 0x0001. The
+blob to be read from the data register has size 4, and it is to be interpreted
+as a uint32_t value in little endian byte order. The current value
+(corresponding to the above outer protocol) is zero.
+
+The guest kernel is not expected to use these registers (although it is
+certainly allowed to); the device tree bindings are documented here because
+this is where device tree bindings reside in general.
+
+Required properties:
+
+- compatible: "qemu,fw-cfg-mmio".
+
+- reg: the MMIO region used by the device.
+  * Bytes 0x0 to 0x7 cover the data register.
+  * Bytes 0x8 to 0x9 cover the selector register.
+  * Further registers may be appended to the region in case of future interface
+    revisions / feature bits.
+
+Example:
+
+/ {
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	fw-cfg@9020000 {
+		compatible = "qemu,fw-cfg-mmio";
+		reg = <0x0 0x9020000 0x0 0xa>;
+	};
+};

Documentation/devicetree/bindings/graph.txt

@@ -19,7 +19,7 @@ type of the connections, they just map their existence. Specific properties
 may be described by specialized bindings depending on the type of connection.
 
 To see how this binding applies to video pipelines, for example, see
-Documentation/device-tree/bindings/media/video-interfaces.txt.
+Documentation/devicetree/bindings/media/video-interfaces.txt.
 Here the ports describe data interfaces, and the links between them are
 the connecting data buses. A single port with multiple connections can
 correspond to multiple devices being connected to the same physical bus.

Documentation/devicetree/bindings/i2c/i2c-st.txt

@@ -31,7 +31,7 @@ i2c0: i2c@fed40000 {
 	compatible	= "st,comms-ssc4-i2c";
 	reg		= <0xfed40000 0x110>;
 	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&CLK_S_ICN_REG_0>;
+	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 	clock-names	= "ssc";
 	clock-frequency = <400000>;
 	pinctrl-names	= "default";

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -47,6 +47,7 @@ dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
 dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
 dallas,ds75		Digital Thermometer and Thermostat
 dlg,da9053		DA9053: flexible system level PMIC with multicore support
+dlg,da9063		DA9063: system PMIC for quad-core application processors
 epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer

Documentation/devicetree/bindings/net/davinci_emac.txt

@@ -4,7 +4,8 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+  "ti,dm816-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -9,7 +9,6 @@ ad	Avionic Design GmbH
 adapteva	Adapteva, Inc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
-ak	Asahi Kasei Corp.
 allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
@@ -20,6 +19,7 @@ amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
+asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
@@ -128,6 +128,7 @@ pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm Technologies, Inc
+qemu	QEMU, a generic and open source machine emulator and virtualizer
 qnap	QNAP Systems, Inc.
 radxa	Radxa
 raidsonic	RaidSonic Technology GmbH
@@ -169,6 +170,7 @@ usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
+virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 voipac	Voipac Technologies s.r.o.
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics

Documentation/kernel-parameters.txt

@@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
+	i8042.kbdreset  [HW] Reset device connected to KBD port
 
 	i810=		[HW,DRM]
 

Documentation/networking/ip-sysctl.txt

@@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
 	this when using large numbers of interfaces and/or routes.
+	From linux kernel 3.6 onwards, this is deprecated for ipv4
+	as route cache is no longer used.
 
 neigh/default/gc_thresh1 - INTEGER
 	Minimum number of entries to keep.  Garbage collector will not

Documentation/networking/netlink_mmap.txt

@@ -199,16 +199,9 @@ frame header.
 TX limitations
 --------------
 
-Kernel processing usually involves validation of the message received by
-user-space, then processing its contents. The kernel must assure that
-userspace is not able to modify the message contents after they have been
-validated. In order to do so, the message is copied from the ring frame
-to an allocated buffer if either of these conditions is false:
-
-- only a single mapping of the ring exists
-- the file descriptor is not shared between processes
-
-This means that for threaded programs, the kernel will fall back to copying.
+As of Jan 2015 the message is always copied from the ring frame to an
+allocated buffer due to unresolved security concerns.
+See commit 4682a0358639b29cf ("netlink: Always copy on mmap TX.").
 
 Example
 -------

Documentation/target/tcm_mod_builder.py

@@ -389,9 +389,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.release_cmd			= " + fabric_mod_name + "_release_cmd,\n"
 	buf += "	.shutdown_session		= " + fabric_mod_name + "_shutdown_session,\n"
 	buf += "	.close_session			= " + fabric_mod_name + "_close_session,\n"
-	buf += "	.stop_session			= " + fabric_mod_name + "_stop_session,\n"
-	buf += "	.fall_back_to_erl0		= " + fabric_mod_name + "_reset_nexus,\n"
-	buf += "	.sess_logged_in			= " + fabric_mod_name + "_sess_logged_in,\n"
 	buf += "	.sess_get_index			= " + fabric_mod_name + "_sess_get_index,\n"
 	buf += "	.sess_get_initiator_sid		= NULL,\n"
 	buf += "	.write_pending			= " + fabric_mod_name + "_write_pending,\n"
@@ -402,7 +399,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.queue_data_in			= " + fabric_mod_name + "_queue_data_in,\n"
 	buf += "	.queue_status			= " + fabric_mod_name + "_queue_status,\n"
 	buf += "	.queue_tm_rsp			= " + fabric_mod_name + "_queue_tm_rsp,\n"
-	buf += "	.is_state_remove		= " + fabric_mod_name + "_is_state_remove,\n"
+	buf += "	.aborted_task			= " + fabric_mod_name + "_aborted_task,\n"
 	buf += "	/*\n"
 	buf += "	 * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
 	buf += "	 */\n"
@@ -428,7 +425,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	/*\n"
 	buf += "	 * Register the top level struct config_item_type with TCM core\n"
 	buf += "	 */\n"
-	buf += "	fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
+	buf += "	fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name + "\");\n"
 	buf += "	if (IS_ERR(fabric)) {\n"
 	buf += "		printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
 	buf += "		return PTR_ERR(fabric);\n"
@@ -595,7 +592,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 		if re.search('get_fabric_name', fo):
 			buf += "char *" + fabric_mod_name + "_get_fabric_name(void)\n"
 			buf += "{\n"
-			buf += "	return \"" + fabric_mod_name[4:] + "\";\n"
+			buf += "	return \"" + fabric_mod_name + "\";\n"
 			buf += "}\n\n"
 			bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
 			continue
@@ -820,27 +817,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			buf += "}\n\n"
 			bufi += "void " + fabric_mod_name + "_close_session(struct se_session *);\n"
 
-		if re.search('stop_session\)\(', fo):
-			buf += "void " + fabric_mod_name + "_stop_session(struct se_session *se_sess, int sess_sleep , int conn_sleep)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_stop_session(struct se_session *, int, int);\n"
-
-		if re.search('fall_back_to_erl0\)\(', fo):
-			buf += "void " + fabric_mod_name + "_reset_nexus(struct se_session *se_sess)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_reset_nexus(struct se_session *);\n"
-
-		if re.search('sess_logged_in\)\(', fo):
-			buf += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *se_sess)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *);\n"
-
 		if re.search('sess_get_index\)\(', fo):
 			buf += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *se_sess)\n"
 			buf += "{\n"
@@ -898,19 +874,18 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			bufi += "int " + fabric_mod_name + "_queue_status(struct se_cmd *);\n"
 
 		if re.search('queue_tm_rsp\)\(', fo):
-			buf += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
+			buf += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
-			buf += "	return 0;\n"
+			buf += "	return;\n"
 			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
+			bufi += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
 
-		if re.search('is_state_remove\)\(', fo):
-			buf += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *se_cmd)\n"
+		if re.search('aborted_task\)\(', fo):
+			buf += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
-			buf += "	return 0;\n"
+			buf += "	return;\n"
 			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
-
+			bufi += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *);\n"
 
 	ret = p.write(buf)
 	if ret:
@@ -1018,11 +993,11 @@ def main(modname, proto_ident):
 	tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name)
 	tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name)
 
-	input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Makefile..? [yes,no]: ")
+	input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Makefile..? [yes,no]: ")
 	if input == "yes" or input == "y":
 		tcm_mod_add_kbuild(tcm_dir, fabric_mod_name)
 
-	input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Kconfig..? [yes,no]: ")
+	input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Kconfig..? [yes,no]: ")
 	if input == "yes" or input == "y":
 		tcm_mod_add_kconfig(tcm_dir, fabric_mod_name)
 

Documentation/thermal/cpu-cooling-api.txt

@@ -3,7 +3,7 @@ CPU cooling APIs How To
 
 Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
 
-Updated: 12 May 2012
+Updated: 6 Jan 2015
 
 Copyright (c)  2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
 
@@ -25,7 +25,18 @@ the user. The registration APIs returns the cooling device pointer.
 
    clip_cpus: cpumask of cpus where the frequency constraints will happen.
 
-1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
+	struct device_node *np, const struct cpumask *clip_cpus)
+
+    This interface function registers the cpufreq cooling device with
+    the name "thermal-cpufreq-%x" linking it with a device tree node, in
+    order to bind it via the thermal DT code. This api can support multiple
+    instances of cpufreq cooling devices.
+
+    np: pointer to the cooling device device tree node
+    clip_cpus: cpumask of cpus where the frequency constraints will happen.
+
+1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
     This interface function unregisters the "thermal-cpufreq-%x" cooling device.
 

MAINTAINERS

@@ -696,7 +696,7 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	sound/soc/blackfin/*
- 
+
 ANALOG DEVICES INC IIO DRIVERS
 M:	Lars-Peter Clausen <lars@metafoo.de>
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
@@ -708,6 +708,16 @@ X:	drivers/iio/*/adjd*
 F:	drivers/staging/iio/*/ad*
 F:	staging/iio/trigger/iio-trig-bfin-timer.c
 
+ANDROID DRIVERS
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Arve Hjønnevåg <arve@android.com>
+M:	Riley Andrews <riandrews@android.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/gregkh/staging.git
+L:	devel@driverdev.osuosl.org
+S:	Supported
+F:	drivers/android/
+F:	drivers/staging/android/
+
 AOA (Apple Onboard Audio) ALSA DRIVER
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -754,13 +764,6 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/aptina-pll.*
 
-ARASAN COMPACT FLASH PATA CONTROLLER
-M:	Viresh Kumar <viresh.linux@gmail.com>
-L:	linux-ide@vger.kernel.org
-S:	Maintained
-F:	include/linux/pata_arasan_cf_data.h
-F:	drivers/ata/pata_arasan_cf.c
-
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
@@ -2346,7 +2349,8 @@ CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
 L:	linux-can@vger.kernel.org
 W:	http://gitorious.org/linux-can
-T:	git git://gitorious.org/linux-can/linux-can-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
 F:	Documentation/networking/can.txt
 F:	net/can/
@@ -2361,7 +2365,8 @@ M:	Wolfgang Grandegger <wg@grandegger.com>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
 W:	http://gitorious.org/linux-can
-T:	git git://gitorious.org/linux-can/linux-can-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
 F:	drivers/net/can/
 F:	include/linux/can/dev.h
@@ -3183,7 +3188,7 @@ L:	dmaengine@vger.kernel.org
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 S:	Maintained
 F:	drivers/dma/
-F:	include/linux/dma*
+F:	include/linux/dmaengine.h
 F:	Documentation/dmaengine/
 T:	git git://git.infradead.org/users/vkoul/slave-dma.git
 
@@ -4757,20 +4762,20 @@ S:	Supported
 F:	drivers/scsi/ipr.*
 
 IBM Power Virtual Ethernet Device Driver
-M:	Santiago Leon <santil@linux.vnet.ibm.com>
+M:	Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/ibm/ibmveth.*
 
 IBM Power Virtual SCSI Device Drivers
-M:	Nathan Fontenot <nfont@linux.vnet.ibm.com>
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/ibmvscsi/ibmvscsi*
 F:	drivers/scsi/ibmvscsi/viosrp.h
 
 IBM Power Virtual FC Device Drivers
-M:	Brian King <brking@linux.vnet.ibm.com>
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/ibmvscsi/ibmvfc*
@@ -4938,7 +4943,6 @@ F:	include/uapi/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
 M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
-M:	Dmitry Torokhov <dtor@mail.ru>
 L:	linux-input@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-input/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
@@ -4957,10 +4961,19 @@ F:	Documentation/input/multi-touch-protocol.txt
 F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
+INTEL ASoC BDW/HSW DRIVERS
+M:	Jie Yang <yang.jie@linux.intel.com>
+L:	alsa-devel@alsa-project.org
+S:	Supported
+F:	sound/soc/intel/sst-haswell*
+F:	sound/soc/intel/sst-dsp*
+F:	sound/soc/intel/sst-firmware.c
+F:	sound/soc/intel/broadwell.c
+F:	sound/soc/intel/haswell.c
+
 INTEL C600 SERIES SAS CONTROLLER DRIVER
 M:	Intel SCU Linux support <intel-linux-scu@intel.com>
 M:	Artur Paszkiewicz <artur.paszkiewicz@intel.com>
-M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.code.sf.net/p/intel-sas/isci
 S:	Supported
@@ -5288,6 +5301,15 @@ W:	www.open-iscsi.org
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/ulp/iser/
 
+ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
+M:	Sagi Grimberg <sagig@mellanox.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
+L:	linux-rdma@vger.kernel.org
+L:	target-devel@vger.kernel.org
+S:	Supported
+W:	http://www.linux-iscsi.org
+F:	drivers/infiniband/ulp/isert
+
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
@@ -5702,6 +5724,49 @@ F:	drivers/lguest/
 F:	include/linux/lguest*.h
 F:	tools/lguest/
 
+LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/
+F:	include/linux/ata.h
+F:	include/linux/libata.h
+
+LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
+M:	Viresh Kumar <viresh.linux@gmail.com>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	include/linux/pata_arasan_cf_data.h
+F:	drivers/ata/pata_arasan_cf.c
+
+LIBATA PATA DRIVERS
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/pata_*.c
+F:	drivers/ata/ata_generic.c
+
+LIBATA SATA AHCI PLATFORM devices support
+M:	Hans de Goede <hdegoede@redhat.com>
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/ahci_platform.c
+F:	drivers/ata/libahci_platform.c
+F:	include/linux/ahci_platform.h
+
+LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
+M:	Mikael Pettersson <mikpelinux@gmail.com>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/sata_promise.*
+
 LIBLOCKDEP
 M:	Sasha Levin <sasha.levin@oracle.com>
 S:	Maintained
@@ -6986,14 +7051,12 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@linaro.org>
 M:	Rob Herring <robh+dt@kernel.org>
 L:	devicetree@vger.kernel.org
-W:	http://fdt.secretlab.ca
-T:	git git://git.secretlab.ca/git/linux-2.6.git
+W:	http://www.devicetree.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux.git
 S:	Maintained
 F:	drivers/of/
 F:	include/linux/of*.h
 F:	scripts/dtc/
-K:	of_get_property
-K:	of_match_table
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <robh+dt@kernel.org>
@@ -7238,7 +7301,7 @@ S:	Maintained
 F:	drivers/pci/host/*layerscape*
 
 PCI DRIVER FOR IMX6
-M:	Richard Zhu <r65037@freescale.com>
+M:	Richard Zhu <Richard.Zhu@freescale.com>
 M:	Lucas Stach <l.stach@pengutronix.de>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -7408,6 +7471,7 @@ F:	drivers/crypto/picoxcell*
 PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-gpio@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
 S:	Maintained
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
@@ -7575,12 +7639,6 @@ W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
 F:	drivers/net/wireless/prism54/
 
-PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-M:	Mikael Pettersson <mikpelinux@gmail.com>
-L:	linux-ide@vger.kernel.org
-S:	Maintained
-F:	drivers/ata/sata_promise.*
-
 PS3 NETWORK SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
@@ -7746,8 +7804,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/
 
 QLOGIC QLA4XXX iSCSI DRIVER
-M:	Vikas Chaudhary <vikas.chaudhary@qlogic.com>
-M:	iscsi-driver@qlogic.com
+M:	QLogic-Storage-Upstream@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla4xxx
@@ -8555,25 +8612,6 @@ S:	Maintained
 F:	drivers/misc/phantom.c
 F:	include/uapi/linux/phantom.h
 
-SERIAL ATA (SATA) SUBSYSTEM
-M:	Tejun Heo <tj@kernel.org>
-L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S:	Supported
-F:	drivers/ata/
-F:	include/linux/ata.h
-F:	include/linux/libata.h
-
-SERIAL ATA AHCI PLATFORM devices support
-M:	Hans de Goede <hdegoede@redhat.com>
-M:	Tejun Heo <tj@kernel.org>
-L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S:	Supported
-F:	drivers/ata/ahci_platform.c
-F:	drivers/ata/libahci_platform.c
-F:	include/linux/ahci_platform.h
-
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
 M:	Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
 L:	linux-scsi@vger.kernel.org
@@ -9228,7 +9266,6 @@ F:	drivers/net/ethernet/dlink/sundance.c
 
 SUPERH
 L:	linux-sh@vger.kernel.org
-W:	http://www.linux-sh.org
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
 S:	Orphan
 F:	Documentation/sh/
@@ -9549,7 +9586,8 @@ F:	drivers/platform/x86/thinkpad_acpi.c
 TI BANDGAP AND THERMAL DRIVER
 M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-pm@vger.kernel.org
-S:	Supported
+L:	linux-omap@vger.kernel.org
+S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
 TI CLOCK DRIVER
@@ -10162,6 +10200,7 @@ USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION =
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/alpha/kernel/pci.c

@@ -285,8 +285,12 @@ pcibios_claim_one_bus(struct pci_bus *b)
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
-			    (r->flags & IORESOURCE_PCI_FIXED))
-				pci_claim_resource(dev, i);
+			    (r->flags & IORESOURCE_PCI_FIXED)) {
+				if (pci_claim_resource(dev, i) == 0)
+					continue;
+
+				pci_claim_bridge_resource(dev, i);
+			}
 		}
 	}
 

arch/alpha/mm/fault.c

@@ -156,6 +156,8 @@ retry:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/arc/mm/fault.c

@@ -161,6 +161,8 @@ good_area:
 
 	if (fault & VM_FAULT_OOM)
 		goto out_of_memory;
+	else if (fault & VM_FAULT_SIGSEGV)
+		goto bad_area;
 	else if (fault & VM_FAULT_SIGBUS)
 		goto do_sigbus;
 

arch/arm/boot/compressed/head.S

@@ -263,16 +263,37 @@ restart:	adr	r0, LC0
 		 * OK... Let's do some funky business here.
 		 * If we do have a DTB appended to zImage, and we do have
 		 * an ATAG list around, we want the later to be translated
-		 * and folded into the former here.  To be on the safe side,
-		 * let's temporarily move  the stack away into the malloc
-		 * area.  No GOT fixup has occurred yet, but none of the
-		 * code we're about to call uses any global variable.
+		 * and folded into the former here. No GOT fixup has occurred
+		 * yet, but none of the code we're about to call uses any
+		 * global variable.
 		*/
-		add	sp, sp, #0x10000
+
+		/* Get the initial DTB size */
+		ldr	r5, [r6, #4]
+#ifndef __ARMEB__
+		/* convert to little endian */
+		eor	r1, r5, r5, ror #16
+		bic	r1, r1, #0x00ff0000
+		mov	r5, r5, ror #8
+		eor	r5, r5, r1, lsr #8
+#endif
+		/* 50% DTB growth should be good enough */
+		add	r5, r5, r5, lsr #1
+		/* preserve 64-bit alignment */
+		add	r5, r5, #7
+		bic	r5, r5, #7
+		/* clamp to 32KB min and 1MB max */
+		cmp	r5, #(1 << 15)
+		movlo	r5, #(1 << 15)
+		cmp	r5, #(1 << 20)
+		movhi	r5, #(1 << 20)
+		/* temporarily relocate the stack past the DTB work space */
+		add	sp, sp, r5
+
 		stmfd	sp!, {r0-r3, ip, lr}
 		mov	r0, r8
 		mov	r1, r6
-		sub	r2, sp, r6
+		mov	r2, r5
 		bl	atags_to_fdt
 
 		/*
@@ -285,11 +306,11 @@ restart:	adr	r0, LC0
 		bic	r0, r0, #1
 		add	r0, r0, #0x100
 		mov	r1, r6
-		sub	r2, sp, r6
+		mov	r2, r5
 		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
-		sub	sp, sp, #0x10000
+		sub	sp, sp, r5
 #endif
 
 		mov	r8, r6			@ use the appended device tree
@@ -306,7 +327,7 @@ restart:	adr	r0, LC0
 		subs	r1, r5, r1
 		addhi	r9, r9, r1
 
-		/* Get the dtb's size */
+		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
 #ifndef __ARMEB__
 		/* convert r5 (dtb size) to little endian */

arch/arm/boot/dts/at91sam9263.dtsi

@@ -953,6 +953,8 @@
 			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "lcdc_clk", "hclk";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/berlin2q-marvell-dmp.dts

@@ -65,6 +65,8 @@
 };
 
 &sdhci2 {
+	broken-cd;
+	bus-width = <8>;
 	non-removable;
 	status = "okay";
 };

arch/arm/boot/dts/berlin2q.dtsi

@@ -83,7 +83,8 @@
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SDIO1XIN>;
+			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clock-names = "io", "core";
 			status = "disabled";
 		};
 
@@ -348,36 +349,6 @@
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			};
-
-			gpio4: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			gpio5: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
 		};
 
 		chip: chip-control@ea0000 {
@@ -466,6 +437,21 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
 			i2c2: i2c@7000 {
 				compatible = "snps,designware-i2c";
 				#address-cells = <1>;
@@ -516,6 +502,21 @@
 				status = "disabled";
 			};
 
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
 			sysctrl: pin-controller@d000 {
 				compatible = "marvell,berlin2q-system-ctrl";
 				reg = <0xd000 0x100>;

arch/arm/boot/dts/dra7-evm.dts

@@ -499,23 +499,23 @@
 		};
 		partition@5 {
 			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00010000>;
+			reg = <0x00140000 0x00080000>;
 		};
 		partition@6 {
 			label = "QSPI.u-boot-env";
-			reg = <0x00150000 0x00010000>;
+			reg = <0x001c0000 0x00010000>;
 		};
 		partition@7 {
 			label = "QSPI.u-boot-env.backup1";
-			reg = <0x00160000 0x0010000>;
+			reg = <0x001d0000 0x0010000>;
 		};
 		partition@8 {
 			label = "QSPI.kernel";
-			reg = <0x00170000 0x0800000>;
+			reg = <0x001e0000 0x0800000>;
 		};
 		partition@9 {
 			label = "QSPI.file-system";
-			reg = <0x00970000 0x01690000>;
+			reg = <0x009e0000 0x01620000>;
 		};
 	};
 };

arch/arm/boot/dts/dra7.dtsi

@@ -1257,6 +1257,8 @@
 				tx-fifo-resize;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
 			};
 		};
 
@@ -1278,6 +1280,8 @@
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
 			};
 		};
 
@@ -1299,6 +1303,8 @@
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
 			};
 		};
 

arch/arm/boot/dts/exynos4.dtsi

@@ -368,7 +368,7 @@
 	};
 
 	i2s1: i2s@13960000 {
-		compatible = "samsung,s5pv210-i2s";
+		compatible = "samsung,s3c6410-i2s";
 		reg = <0x13960000 0x100>;
 		clocks = <&clock CLK_I2S1>;
 		clock-names = "iis";
@@ -378,7 +378,7 @@
 	};
 
 	i2s2: i2s@13970000 {
-		compatible = "samsung,s5pv210-i2s";
+		compatible = "samsung,s3c6410-i2s";
 		reg = <0x13970000 0x100>;
 		clocks = <&clock CLK_I2S2>;
 		clock-names = "iis";

arch/arm/boot/dts/exynos5250.dtsi

@@ -736,7 +736,7 @@
 
 	dp_phy: video-phy@10040720 {
 		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040720 4>;
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#phy-cells = <0>;
 	};
 

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -372,3 +372,7 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
+
+&cci {
+	status = "disabled";
+};

arch/arm/boot/dts/exynos5420.dtsi

@@ -120,7 +120,7 @@
 		};
 	};
 
-	cci@10d20000 {
+	cci: cci@10d20000 {
 		compatible = "arm,cci-400";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -503,8 +503,8 @@
 	};
 
 	dp_phy: video-phy@10040728 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040728 4>;
+		compatible = "samsung,exynos5420-dp-video-phy";
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#phy-cells = <0>;
 	};
 

arch/arm/boot/dts/imx25.dtsi

@@ -162,7 +162,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>, <&clks 62>;
+				clocks = <&clks 78>, <&clks 78>;
 				clock-names = "ipg", "per";
 				interrupts = <14>;
 				status = "disabled";
@@ -369,7 +369,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 36>;
+				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <36>;
 			};
@@ -388,7 +388,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 36>;
+				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <41>;
 			};
@@ -429,7 +429,7 @@
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 36>;
+				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <42>;
 			};
@@ -476,7 +476,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 36>;
+				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};

arch/arm/boot/dts/imx51-babbage.dts

@@ -127,24 +127,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reg_usbh1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1reg>;
-			reg = <0>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usbotg_vbus: regulator@1 {
+		reg_hub_reset: regulator@0 {
 			compatible = "regulator-fixed";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <1>;
-			regulator-name = "usbotg_vbus";
+			reg = <0>;
+			regulator-name = "hub_reset";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
@@ -176,6 +164,7 @@
 			reg = <0>;
 			clocks = <&clks IMX5_CLK_DUMMY>;
 			clock-names = "main_clk";
+			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
@@ -419,7 +408,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&reg_hub_reset>;
 	fsl,usbphy = <&usbh1phy>;
 	phy_type = "ulpi";
 	status = "okay";
@@ -429,7 +418,6 @@
 	dr_mode = "otg";
 	disable-over-current;
 	phy_type = "utmi_wide";
-	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -335,8 +335,8 @@
 			vpu: vpu@02040000 {
 				compatible = "cnm,coda960";
 				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
-				             <0 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "bit", "jpeg";
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>,

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -159,13 +159,28 @@
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-supply = <&reg_enet_3v3>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
 };
 
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
 	status = "okay";
 };
 

arch/arm/boot/dts/ls1021a.dtsi

@@ -142,6 +142,7 @@
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1021a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
 		};
 
 		clockgen: clocking@1ee1000 {

arch/arm/boot/dts/omap3-n900.dts

@@ -700,11 +700,9 @@
 		};
 	};
 
+	/* Ethernet is on some early development boards and qemu */
 	ethernet@gpmc {
 		compatible = "smsc,lan91c94";
-
-		status = "disabled";
-
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
 		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -155,6 +155,15 @@
 };
 
 &pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
 	backlight {
 		bl_en: bl-en {
 			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -173,6 +182,27 @@
 		};
 	};
 
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on EVB board so bump up to 8ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;

arch/arm/boot/dts/sama5d3xmb.dtsi

@@ -176,7 +176,7 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"MICBIAS", "IN1L",
+			"Mic", "MICBIAS",
 			"IN1L", "Mic";
 
 		atmel,ssc-controller = <&ssc0>;

arch/arm/boot/dts/sama5d4.dtsi

@@ -1008,7 +1008,7 @@
 
 			pit: timer@fc068630 {
 				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfc068630 0xf>;
+				reg = <0xfc068630 0x10>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
 				clocks = <&h32ck>;
 			};

arch/arm/boot/dts/ste-nomadik-nhk15.dts

@@ -25,11 +25,11 @@
 		stmpe2401_1 {
 			stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
 				nhk_cfg1 {
-					ste,pins = "GPIO76_B20"; // IRQ line
+					pins = "GPIO76_B20"; // IRQ line
 					ste,input = <0>;
 				};
 				nhk_cfg2 {
-					ste,pins = "GPIO77_B8"; // reset line
+					pins = "GPIO77_B8"; // reset line
 					ste,output = <1>;
 				};
 			};
@@ -37,11 +37,11 @@
 		stmpe2401_2 {
 			stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
 				nhk_cfg1 {
-					ste,pins = "GPIO78_A8"; // IRQ line
+					pins = "GPIO78_A8"; // IRQ line
 					ste,input = <0>;
 				};
 				nhk_cfg2 {
-					ste,pins = "GPIO79_C9"; // reset line
+					pins = "GPIO79_C9"; // reset line
 					ste,output = <1>;
 				};
 			};

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -17,14 +17,6 @@
 
 	aliases {
 		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
 	};
 
 	chosen {
@@ -39,6 +31,14 @@
 				 <&ahb_gates 44>;
 			status = "disabled";
 		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
 	};
 
 	cpus {
@@ -438,8 +438,8 @@
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -55,6 +55,12 @@
 	model = "Olimex A10s-Olinuxino Micro";
 	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
 	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -18,10 +18,6 @@
 
 	aliases {
 		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
 	};
 
 	chosen {
@@ -390,8 +386,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun5i-a13-hsg-h702.dts

@@ -53,6 +53,10 @@
 	model = "HSG H702";
 	compatible = "hsg,h702", "allwinner,sun5i-a13";
 
+	aliases {
+		serial0 = &uart1;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

@@ -54,6 +54,10 @@
 	model = "Olimex A13-Olinuxino Micro";
 	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
 
+	aliases {
+		serial0 = &uart1;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -55,6 +55,10 @@
 	model = "Olimex A13-Olinuxino";
 	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
 
+	aliases {
+		serial0 = &uart1;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -16,11 +16,6 @@
 / {
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart3;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -349,8 +344,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -53,12 +53,6 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
 		ethernet0 = &gmac;
 	};
 

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -55,6 +55,12 @@
 	model = "LeMaker Banana Pi";
 	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
 	soc@01c00000 {
 		spi0: spi@01c05000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -19,6 +19,14 @@
 	model = "Merrii A20 Hummingbird";
 	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -20,6 +20,9 @@
 	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
 
 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
 		spi0 = &spi1;
 		spi1 = &spi2;
 	};

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -54,14 +54,6 @@
 
 	aliases {
 		ethernet0 = &gmac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
 	};
 
 	chosen {

arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts

@@ -55,6 +55,10 @@
 	model = "Ippo Q8H Dual Core Tablet (v5)";
 	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
 
+	aliases {
+		serial0 = &r_uart;
+	};
+
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};

arch/arm/boot/dts/sun8i-a23.dtsi

@@ -52,15 +52,6 @@
 / {
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &r_uart;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -54,6 +54,11 @@
 	model = "Merrii A80 Optimus Board";
 	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -52,16 +52,6 @@
 / {
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &r_uart;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -406,7 +406,7 @@
 		clock-frequency = <400000>;
 
 		magnetometer@c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0xc>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/vf610-twr.dts

@@ -129,13 +129,28 @@
 
 &fec0 {
 	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
 };
 
 &fec1 {
 	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";

arch/arm/configs/exynos_defconfig

@@ -84,7 +84,8 @@ CONFIG_DEBUG_GPIO=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_CHARGER_TPS65090=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+CONFIG_SENSORS_LM90=y
 CONFIG_THERMAL=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_EXYNOS_THERMAL_CORE=y
@@ -109,11 +110,26 @@ CONFIG_REGULATOR_S2MPA01=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS65090=y
+CONFIG_DRM=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_PTN3460=y
+CONFIG_DRM_PS8622=y
+CONFIG_DRM_EXYNOS=y
+CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_DP=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SIMPLE=y
 CONFIG_EXYNOS_VIDEO=y
 CONFIG_EXYNOS_MIPI_DSI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_7x14=y

arch/arm/configs/omap2plus_defconfig

@@ -68,7 +68,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_GENERIC_CPUFREQ_CPU0=y
+CONFIG_CPUFREQ_DT=y
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_CPU_IDLE=y
 CONFIG_BINFMT_MISC=y

arch/arm/include/asm/kvm_emulate.h

@@ -38,6 +38,16 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 	vcpu->arch.hcr = HCR_GUEST_MASK;
 }
 
+static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.hcr;
+}
+
+static inline void vcpu_set_hcr(struct kvm_vcpu *vcpu, unsigned long hcr)
+{
+	vcpu->arch.hcr = hcr;
+}
+
 static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu)
 {
 	return 1;

arch/arm/include/asm/kvm_host.h

@@ -125,9 +125,6 @@ struct kvm_vcpu_arch {
 	 * Anything that is not used directly from assembly code goes
 	 * here.
 	 */
-	/* dcache set/way operation pending */
-	int last_pcpu;
-	cpumask_t require_dcache_flush;
 
 	/* Don't run the guest on this vcpu */
 	bool pause;

arch/arm/include/asm/kvm_mmu.h

@@ -44,6 +44,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/pgalloc.h>
 
@@ -161,13 +162,10 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 	return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101;
 }
 
-static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
-					     unsigned long size,
-					     bool ipa_uncached)
+static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+					       unsigned long size,
+					       bool ipa_uncached)
 {
-	if (!vcpu_has_cache_enabled(vcpu) || ipa_uncached)
-		kvm_flush_dcache_to_poc((void *)hva, size);
-	
 	/*
 	 * If we are going to insert an instruction page and the icache is
 	 * either VIPT or PIPT, there is a potential problem where the host
@@ -179,18 +177,77 @@ static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
 	 *
 	 * VIVT caches are tagged using both the ASID and the VMID and doesn't
 	 * need any kind of flushing (DDI 0406C.b - Page B3-1392).
+	 *
+	 * We need to do this through a kernel mapping (using the
+	 * user-space mapping has proved to be the wrong
+	 * solution). For that, we need to kmap one page at a time,
+	 * and iterate over the range.
 	 */
-	if (icache_is_pipt()) {
-		__cpuc_coherent_user_range(hva, hva + size);
-	} else if (!icache_is_vivt_asid_tagged()) {
+
+	bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
+
+	VM_BUG_ON(size & PAGE_MASK);
+
+	if (!need_flush && !icache_is_pipt())
+		goto vipt_cache;
+
+	while (size) {
+		void *va = kmap_atomic_pfn(pfn);
+
+		if (need_flush)
+			kvm_flush_dcache_to_poc(va, PAGE_SIZE);
+
+		if (icache_is_pipt())
+			__cpuc_coherent_user_range((unsigned long)va,
+						   (unsigned long)va + PAGE_SIZE);
+
+		size -= PAGE_SIZE;
+		pfn++;
+
+		kunmap_atomic(va);
+	}
+
+vipt_cache:
+	if (!icache_is_pipt() && !icache_is_vivt_asid_tagged()) {
 		/* any kind of VIPT cache */
 		__flush_icache_all();
 	}
 }
 
+static inline void __kvm_flush_dcache_pte(pte_t pte)
+{
+	void *va = kmap_atomic(pte_page(pte));
+
+	kvm_flush_dcache_to_poc(va, PAGE_SIZE);
+
+	kunmap_atomic(va);
+}
+
+static inline void __kvm_flush_dcache_pmd(pmd_t pmd)
+{
+	unsigned long size = PMD_SIZE;
+	pfn_t pfn = pmd_pfn(pmd);
+
+	while (size) {
+		void *va = kmap_atomic_pfn(pfn);
+
+		kvm_flush_dcache_to_poc(va, PAGE_SIZE);
+
+		pfn++;
+		size -= PAGE_SIZE;
+
+		kunmap_atomic(va);
+	}
+}
+
+static inline void __kvm_flush_dcache_pud(pud_t pud)
+{
+}
+
 #define kvm_virt_to_phys(x)		virt_to_idmap((unsigned long)(x))
 
-void stage2_flush_vm(struct kvm *kvm);
+void kvm_set_way_flush(struct kvm_vcpu *vcpu);
+void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled);
 
 #endif	/* !__ASSEMBLY__ */
 

arch/arm/kernel/entry-header.S

@@ -253,21 +253,22 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
-	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	mov	r2, sp
+	ldr	r1, [r2, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [r2, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
 	@ We must avoid clrex due to Cortex-A15 erratum #830321
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	strex	r1, r2, [r2]			@ clear the exclusive monitor
 #endif
 	.if	\fast
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	ldmdb	r2, {r1 - lr}^			@ get calling r1 - lr
 	.else
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	ldmdb	r2, {r0 - lr}^			@ get calling r0 - lr
 	.endif
 	mov	r0, r0				@ ARMv5T and earlier require a nop
 						@ after ldm {}^
-	add	sp, sp, #S_FRAME_SIZE - S_PC
+	add	sp, sp, #\offset + S_FRAME_SIZE
 	movs	pc, lr				@ return & move spsr_svc into cpsr
 	.endm
 

arch/arm/kernel/entry-v7m.S

@@ -22,10 +22,12 @@
 
 __invalid_entry:
 	v7m_exception_entry
+#ifdef CONFIG_PRINTK
 	adr	r0, strerr
 	mrs	r1, ipsr
 	mov	r2, lr
 	bl	printk
+#endif
 	mov	r0, sp
 	bl	show_regs
 1:	b	1b

arch/arm/kernel/perf_event.c

@@ -116,8 +116,14 @@ int armpmu_event_set_period(struct perf_event *event)
 		ret = 1;
 	}
 
-	if (left > (s64)armpmu->max_period)
-		left = armpmu->max_period;
+	/*
+	 * Limit the maximum period to prevent the counter value
+	 * from overtaking the one we are about to program. In
+	 * effect we are reducing max_period to account for
+	 * interrupt latency (and we are being very conservative).
+	 */
+	if (left > (armpmu->max_period >> 1))
+		left = armpmu->max_period >> 1;
 
 	local64_set(&hwc->prev_count, (u64)-left);
 

arch/arm/kernel/setup.c

@@ -657,10 +657,13 @@ int __init arm_add_memory(u64 start, u64 size)
 
 	/*
 	 * Ensure that start/size are aligned to a page boundary.
-	 * Size is appropriately rounded down, start is rounded up.
+	 * Size is rounded down, start is rounded up.
 	 */
-	size -= start & ~PAGE_MASK;
 	aligned_start = PAGE_ALIGN(start);
+	if (aligned_start > start + size)
+		size = 0;
+	else
+		size -= aligned_start - start;
 
 #ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
 	if (aligned_start > ULONG_MAX) {

arch/arm/kvm/arm.c

@@ -281,15 +281,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	vcpu->cpu = cpu;
 	vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);
 
-	/*
-	 * Check whether this vcpu requires the cache to be flushed on
-	 * this physical CPU. This is a consequence of doing dcache
-	 * operations by set/way on this vcpu. We do it here to be in
-	 * a non-preemptible section.
-	 */
-	if (cpumask_test_and_clear_cpu(cpu, &vcpu->arch.require_dcache_flush))
-		flush_cache_all(); /* We'd really want v7_flush_dcache_all() */
-
 	kvm_arm_set_running_vcpu(vcpu);
 }
 
@@ -541,7 +532,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		ret = kvm_call_hyp(__kvm_vcpu_run, vcpu);
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
-		vcpu->arch.last_pcpu = smp_processor_id();
 		kvm_guest_exit();
 		trace_kvm_exit(*vcpu_pc(vcpu));
 		/*

arch/arm/kvm/coproc.c

@@ -189,82 +189,40 @@ static bool access_l2ectlr(struct kvm_vcpu *vcpu,
 	return true;
 }
 
-/* See note at ARM ARM B1.14.4 */
+/*
+ * See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
+ */
 static bool access_dcsw(struct kvm_vcpu *vcpu,
 			const struct coproc_params *p,
 			const struct coproc_reg *r)
 {
-	unsigned long val;
-	int cpu;
-
 	if (!p->is_write)
 		return read_from_write_only(vcpu, p);
 
-	cpu = get_cpu();
-
-	cpumask_setall(&vcpu->arch.require_dcache_flush);
-	cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush);
-
-	/* If we were already preempted, take the long way around */
-	if (cpu != vcpu->arch.last_pcpu) {
-		flush_cache_all();
-		goto done;
-	}
-
-	val = *vcpu_reg(vcpu, p->Rt1);
-
-	switch (p->CRm) {
-	case 6:			/* Upgrade DCISW to DCCISW, as per HCR.SWIO */
-	case 14:		/* DCCISW */
-		asm volatile("mcr p15, 0, %0, c7, c14, 2" : : "r" (val));
-		break;
-
-	case 10:		/* DCCSW */
-		asm volatile("mcr p15, 0, %0, c7, c10, 2" : : "r" (val));
-		break;
-	}
-
-done:
-	put_cpu();
-
+	kvm_set_way_flush(vcpu);
 	return true;
 }
 
 /*
  * Generic accessor for VM registers. Only called as long as HCR_TVM
- * is set.
+ * is set.  If the guest enables the MMU, we stop trapping the VM
+ * sys_regs and leave it in complete control of the caches.
+ *
+ * Used by the cpu-specific code.
  */
-static bool access_vm_reg(struct kvm_vcpu *vcpu,
-			  const struct coproc_params *p,
-			  const struct coproc_reg *r)
+bool access_vm_reg(struct kvm_vcpu *vcpu,
+		   const struct coproc_params *p,
+		   const struct coproc_reg *r)
 {
+	bool was_enabled = vcpu_has_cache_enabled(vcpu);
+
 	BUG_ON(!p->is_write);
 
 	vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1);
 	if (p->is_64bit)
 		vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2);
 
-	return true;
-}
-
-/*
- * SCTLR accessor. Only called as long as HCR_TVM is set.  If the
- * guest enables the MMU, we stop trapping the VM sys_regs and leave
- * it in complete control of the caches.
- *
- * Used by the cpu-specific code.
- */
-bool access_sctlr(struct kvm_vcpu *vcpu,
-		  const struct coproc_params *p,
-		  const struct coproc_reg *r)
-{
-	access_vm_reg(vcpu, p, r);
-
-	if (vcpu_has_cache_enabled(vcpu)) {	/* MMU+Caches enabled? */
-		vcpu->arch.hcr &= ~HCR_TVM;
-		stage2_flush_vm(vcpu->kvm);
-	}
-
+	kvm_toggle_cache(vcpu, was_enabled);
 	return true;
 }
 

arch/arm/kvm/coproc.h

@@ -153,8 +153,8 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 #define is64		.is_64 = true
 #define is32		.is_64 = false
 
-bool access_sctlr(struct kvm_vcpu *vcpu,
-		  const struct coproc_params *p,
-		  const struct coproc_reg *r);
+bool access_vm_reg(struct kvm_vcpu *vcpu,
+		   const struct coproc_params *p,
+		   const struct coproc_reg *r);
 
 #endif /* __ARM_KVM_COPROC_LOCAL_H__ */

arch/arm/kvm/coproc_a15.c

@@ -34,7 +34,7 @@
 static const struct coproc_reg a15_regs[] = {
 	/* SCTLR: swapped by interrupt.S. */
 	{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
-			access_sctlr, reset_val, c1_SCTLR, 0x00C50078 },
+			access_vm_reg, reset_val, c1_SCTLR, 0x00C50078 },
 };
 
 static struct kvm_coproc_target_table a15_target_table = {

arch/arm/kvm/coproc_a7.c

@@ -37,7 +37,7 @@
 static const struct coproc_reg a7_regs[] = {
 	/* SCTLR: swapped by interrupt.S. */
 	{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
-			access_sctlr, reset_val, c1_SCTLR, 0x00C50878 },
+			access_vm_reg, reset_val, c1_SCTLR, 0x00C50878 },
 };
 
 static struct kvm_coproc_target_table a7_target_table = {

arch/arm/kvm/mmu.c

@@ -58,6 +58,26 @@ static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
 }
 
+/*
+ * D-Cache management functions. They take the page table entries by
+ * value, as they are flushing the cache using the kernel mapping (or
+ * kmap on 32bit).
+ */
+static void kvm_flush_dcache_pte(pte_t pte)
+{
+	__kvm_flush_dcache_pte(pte);
+}
+
+static void kvm_flush_dcache_pmd(pmd_t pmd)
+{
+	__kvm_flush_dcache_pmd(pmd);
+}
+
+static void kvm_flush_dcache_pud(pud_t pud)
+{
+	__kvm_flush_dcache_pud(pud);
+}
+
 static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
 				  int min, int max)
 {
@@ -119,6 +139,26 @@ static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
 	put_page(virt_to_page(pmd));
 }
 
+/*
+ * Unmapping vs dcache management:
+ *
+ * If a guest maps certain memory pages as uncached, all writes will
+ * bypass the data cache and go directly to RAM.  However, the CPUs
+ * can still speculate reads (not writes) and fill cache lines with
+ * data.
+ *
+ * Those cache lines will be *clean* cache lines though, so a
+ * clean+invalidate operation is equivalent to an invalidate
+ * operation, because no cache lines are marked dirty.
+ *
+ * Those clean cache lines could be filled prior to an uncached write
+ * by the guest, and the cache coherent IO subsystem would therefore
+ * end up writing old data to disk.
+ *
+ * This is why right after unmapping a page/section and invalidating
+ * the corresponding TLBs, we call kvm_flush_dcache_p*() to make sure
+ * the IO subsystem will never hit in the cache.
+ */
 static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
 		       phys_addr_t addr, phys_addr_t end)
 {
@@ -128,9 +168,16 @@ static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
 	start_pte = pte = pte_offset_kernel(pmd, addr);
 	do {
 		if (!pte_none(*pte)) {
+			pte_t old_pte = *pte;
+
 			kvm_set_pte(pte, __pte(0));
-			put_page(virt_to_page(pte));
 			kvm_tlb_flush_vmid_ipa(kvm, addr);
+
+			/* No need to invalidate the cache for device mappings */
+			if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+				kvm_flush_dcache_pte(old_pte);
+
+			put_page(virt_to_page(pte));
 		}
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 
@@ -149,8 +196,13 @@ static void unmap_pmds(struct kvm *kvm, pud_t *pud,
 		next = kvm_pmd_addr_end(addr, end);
 		if (!pmd_none(*pmd)) {
 			if (kvm_pmd_huge(*pmd)) {
+				pmd_t old_pmd = *pmd;
+
 				pmd_clear(pmd);
 				kvm_tlb_flush_vmid_ipa(kvm, addr);
+
+				kvm_flush_dcache_pmd(old_pmd);
+
 				put_page(virt_to_page(pmd));
 			} else {
 				unmap_ptes(kvm, pmd, addr, next);
@@ -173,8 +225,13 @@ static void unmap_puds(struct kvm *kvm, pgd_t *pgd,
 		next = kvm_pud_addr_end(addr, end);
 		if (!pud_none(*pud)) {
 			if (pud_huge(*pud)) {
+				pud_t old_pud = *pud;
+
 				pud_clear(pud);
 				kvm_tlb_flush_vmid_ipa(kvm, addr);
+
+				kvm_flush_dcache_pud(old_pud);
+
 				put_page(virt_to_page(pud));
 			} else {
 				unmap_pmds(kvm, pud, addr, next);
@@ -209,10 +266,9 @@ static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
 
 	pte = pte_offset_kernel(pmd, addr);
 	do {
-		if (!pte_none(*pte)) {
-			hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
-			kvm_flush_dcache_to_poc((void*)hva, PAGE_SIZE);
-		}
+		if (!pte_none(*pte) &&
+		    (pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+			kvm_flush_dcache_pte(*pte);
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
@@ -226,12 +282,10 @@ static void stage2_flush_pmds(struct kvm *kvm, pud_t *pud,
 	do {
 		next = kvm_pmd_addr_end(addr, end);
 		if (!pmd_none(*pmd)) {
-			if (kvm_pmd_huge(*pmd)) {
-				hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
-				kvm_flush_dcache_to_poc((void*)hva, PMD_SIZE);
-			} else {
+			if (kvm_pmd_huge(*pmd))
+				kvm_flush_dcache_pmd(*pmd);
+			else
 				stage2_flush_ptes(kvm, pmd, addr, next);
-			}
 		}
 	} while (pmd++, addr = next, addr != end);
 }
@@ -246,12 +300,10 @@ static void stage2_flush_puds(struct kvm *kvm, pgd_t *pgd,
 	do {
 		next = kvm_pud_addr_end(addr, end);
 		if (!pud_none(*pud)) {
-			if (pud_huge(*pud)) {
-				hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
-				kvm_flush_dcache_to_poc((void*)hva, PUD_SIZE);
-			} else {
+			if (pud_huge(*pud))
+				kvm_flush_dcache_pud(*pud);
+			else
 				stage2_flush_pmds(kvm, pud, addr, next);
-			}
 		}
 	} while (pud++, addr = next, addr != end);
 }
@@ -278,7 +330,7 @@ static void stage2_flush_memslot(struct kvm *kvm,
  * Go through the stage 2 page tables and invalidate any cache lines
  * backing memory already mapped to the VM.
  */
-void stage2_flush_vm(struct kvm *kvm)
+static void stage2_flush_vm(struct kvm *kvm)
 {
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *memslot;
@@ -905,6 +957,12 @@ static bool kvm_is_device_pfn(unsigned long pfn)
 	return !pfn_valid(pfn);
 }
 
+static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+				      unsigned long size, bool uncached)
+{
+	__coherent_cache_guest_page(vcpu, pfn, size, uncached);
+}
+
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			  struct kvm_memory_slot *memslot, unsigned long hva,
 			  unsigned long fault_status)
@@ -994,8 +1052,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			kvm_set_s2pmd_writable(&new_pmd);
 			kvm_set_pfn_dirty(pfn);
 		}
-		coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE,
-					  fault_ipa_uncached);
+		coherent_cache_guest_page(vcpu, pfn, PMD_SIZE, fault_ipa_uncached);
 		ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
 	} else {
 		pte_t new_pte = pfn_pte(pfn, mem_type);
@@ -1003,8 +1060,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			kvm_set_s2pte_writable(&new_pte);
 			kvm_set_pfn_dirty(pfn);
 		}
-		coherent_cache_guest_page(vcpu, hva, PAGE_SIZE,
-					  fault_ipa_uncached);
+		coherent_cache_guest_page(vcpu, pfn, PAGE_SIZE, fault_ipa_uncached);
 		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte,
 			pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE));
 	}
@@ -1411,3 +1467,71 @@ void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
 	unmap_stage2_range(kvm, gpa, size);
 	spin_unlock(&kvm->mmu_lock);
 }
+
+/*
+ * See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
+ *
+ * Main problems:
+ * - S/W ops are local to a CPU (not broadcast)
+ * - We have line migration behind our back (speculation)
+ * - System caches don't support S/W at all (damn!)
+ *
+ * In the face of the above, the best we can do is to try and convert
+ * S/W ops to VA ops. Because the guest is not allowed to infer the
+ * S/W to PA mapping, it can only use S/W to nuke the whole cache,
+ * which is a rather good thing for us.
+ *
+ * Also, it is only used when turning caches on/off ("The expected
+ * usage of the cache maintenance instructions that operate by set/way
+ * is associated with the cache maintenance instructions associated
+ * with the powerdown and powerup of caches, if this is required by
+ * the implementation.").
+ *
+ * We use the following policy:
+ *
+ * - If we trap a S/W operation, we enable VM trapping to detect
+ *   caches being turned on/off, and do a full clean.
+ *
+ * - We flush the caches on both caches being turned on and off.
+ *
+ * - Once the caches are enabled, we stop trapping VM ops.
+ */
+void kvm_set_way_flush(struct kvm_vcpu *vcpu)
+{
+	unsigned long hcr = vcpu_get_hcr(vcpu);
+
+	/*
+	 * If this is the first time we do a S/W operation
+	 * (i.e. HCR_TVM not set) flush the whole memory, and set the
+	 * VM trapping.
+	 *
+	 * Otherwise, rely on the VM trapping to wait for the MMU +
+	 * Caches to be turned off. At that point, we'll be able to
+	 * clean the caches again.
+	 */
+	if (!(hcr & HCR_TVM)) {
+		trace_kvm_set_way_flush(*vcpu_pc(vcpu),
+					vcpu_has_cache_enabled(vcpu));
+		stage2_flush_vm(vcpu->kvm);
+		vcpu_set_hcr(vcpu, hcr | HCR_TVM);
+	}
+}
+
+void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled)
+{
+	bool now_enabled = vcpu_has_cache_enabled(vcpu);
+
+	/*
+	 * If switching the MMU+caches on, need to invalidate the caches.
+	 * If switching it off, need to clean the caches.
+	 * Clean + invalidate does the trick always.
+	 */
+	if (now_enabled != was_enabled)
+		stage2_flush_vm(vcpu->kvm);
+
+	/* Caches are now on, stop trapping VM ops (until a S/W op) */
+	if (now_enabled)
+		vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) & ~HCR_TVM);
+
+	trace_kvm_toggle_cache(*vcpu_pc(vcpu), was_enabled, now_enabled);
+}

arch/arm/kvm/trace.h

@@ -223,6 +223,45 @@ TRACE_EVENT(kvm_hvc,
 		  __entry->vcpu_pc, __entry->r0, __entry->imm)
 );
 
+TRACE_EVENT(kvm_set_way_flush,
+	    TP_PROTO(unsigned long vcpu_pc, bool cache),
+	    TP_ARGS(vcpu_pc, cache),
+
+	    TP_STRUCT__entry(
+		    __field(	unsigned long,	vcpu_pc		)
+		    __field(	bool,		cache		)
+	    ),
+
+	    TP_fast_assign(
+		    __entry->vcpu_pc		= vcpu_pc;
+		    __entry->cache		= cache;
+	    ),
+
+	    TP_printk("S/W flush at 0x%016lx (cache %s)",
+		      __entry->vcpu_pc, __entry->cache ? "on" : "off")
+);
+
+TRACE_EVENT(kvm_toggle_cache,
+	    TP_PROTO(unsigned long vcpu_pc, bool was, bool now),
+	    TP_ARGS(vcpu_pc, was, now),
+
+	    TP_STRUCT__entry(
+		    __field(	unsigned long,	vcpu_pc		)
+		    __field(	bool,		was		)
+		    __field(	bool,		now		)
+	    ),
+
+	    TP_fast_assign(
+		    __entry->vcpu_pc		= vcpu_pc;
+		    __entry->was		= was;
+		    __entry->now		= now;
+	    ),
+
+	    TP_printk("VM op at 0x%016lx (cache was %s, now %s)",
+		      __entry->vcpu_pc, __entry->was ? "on" : "off",
+		      __entry->now ? "on" : "off")
+);
+
 #endif /* _TRACE_KVM_H */
 
 #undef TRACE_INCLUDE_PATH

arch/arm/mach-at91/board-dt-sama5.c

@@ -17,6 +17,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/clk-provider.h>
+#include <linux/phy.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -26,8 +27,25 @@
 
 #include "generic.h"
 
+static int ksz8081_phy_fixup(struct phy_device *phy)
+{
+	int value;
+
+	value = phy_read(phy, 0x16);
+	value &= ~0x20;
+	phy_write(phy, 0x16, value);
+
+	return 0;
+}
+
 static void __init sama5_dt_device_init(void)
 {
+	if (of_machine_is_compatible("atmel,sama5d4ek") &&
+	   IS_ENABLED(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_id("fc028000.etherne:00",
+						ksz8081_phy_fixup);
+	}
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 

arch/arm/mach-imx/clk-imx6q.c

@@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		post_div_table[1].div = 1;
 		post_div_table[2].div = 1;
 		video_div_table[1].div = 1;
-		video_div_table[2].div = 1;
+		video_div_table[3].div = 1;
 	}
 
 	clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));

arch/arm/mach-imx/clk-imx6sx.c

@@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
 	clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
 
+	clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+	clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 }

arch/arm/mach-mvebu/coherency.c

@@ -189,6 +189,13 @@ static void __init armada_375_380_coherency_init(struct device_node *np)
 	coherency_cpu_base = of_iomap(np, 0);
 	arch_ioremap_caller = armada_pcie_wa_ioremap_caller;
 
+	/*
+	 * We should switch the PL310 to I/O coherency mode only if
+	 * I/O coherency is actually enabled.
+	 */
+	if (!coherency_available())
+		return;
+
 	/*
 	 * Add the PL310 property "arm,io-coherent". This makes sure the
 	 * outer sync operation is not used, which allows to
@@ -246,9 +253,14 @@ static int coherency_type(void)
 	return type;
 }
 
+/*
+ * As a precaution, we currently completely disable hardware I/O
+ * coherency, until enough testing is done with automatic I/O
+ * synchronization barriers to validate that it is a proper solution.
+ */
 int coherency_available(void)
 {
-	return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+	return false;
 }
 
 int __init coherency_init(void)

arch/arm/mach-omap2/board-generic.c

@@ -77,6 +77,24 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
+/* Some boards need board name for legacy userspace in /proc/cpuinfo */
+static const char *const n900_boards_compat[] __initconst = {
+	"nokia,omap3-n900",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.dt_compat	= n900_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
+/* Generic omap3 boards, most boards can use these */
 static const char *const omap3_boards_compat[] __initconst = {
 	"ti,omap3430",
 	"ti,omap3",

arch/arm/mach-omap2/common.h

@@ -211,6 +211,7 @@ extern struct device *omap2_get_iva_device(void);
 extern struct device *omap2_get_l3_device(void);
 extern struct device *omap4_get_dsp_device(void);
 
+unsigned int omap4_xlate_irq(unsigned int hwirq);
 void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
@@ -249,6 +250,7 @@ extern void omap4_cpu_die(unsigned int cpu);
 extern struct smp_operations omap4_smp_ops;
 
 extern void omap5_secondary_startup(void);
+extern void omap5_secondary_hyp_startup(void);
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)

arch/arm/mach-omap2/control.h

@@ -286,6 +286,10 @@
 #define OMAP5XXX_CONTROL_STATUS                0x134
 #define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
 
+/* DRA7XX CONTROL CORE BOOTSTRAP */
+#define DRA7_CTRL_CORE_BOOTSTRAP	0x6c4
+#define DRA7_SPEEDSELECT_MASK		(0x3 << 8)
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.

arch/arm/mach-omap2/omap-headsmp.S

@@ -22,6 +22,7 @@
 
 /* Physical address needed since MMU not enabled yet on secondary core */
 #define AUX_CORE_BOOT0_PA			0x48281800
+#define API_HYP_ENTRY				0x102
 
 /*
  * OMAP5 specific entry point for secondary CPU to jump from ROM
@@ -40,6 +41,26 @@ wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	bne	wait
 	b	secondary_startup
 ENDPROC(omap5_secondary_startup)
+/*
+ * Same as omap5_secondary_startup except we call into the ROM to
+ * enable HYP mode first.  This is called instead of
+ * omap5_secondary_startup if the primary CPU was put into HYP mode by
+ * the boot loader.
+ */
+ENTRY(omap5_secondary_hyp_startup)
+wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait_2
+	ldr	r12, =API_HYP_ENTRY
+	adr	r0, hyp_boot
+	smc	#0
+hyp_boot:
+	b	secondary_startup
+ENDPROC(omap5_secondary_hyp_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which

arch/arm/mach-omap2/omap-smp.c

@@ -22,6 +22,7 @@
 #include <linux/irqchip/arm-gic.h>
 
 #include <asm/smp_scu.h>
+#include <asm/virt.h>
 
 #include "omap-secure.h"
 #include "omap-wakeupgen.h"
@@ -227,8 +228,16 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	if (omap_secure_apis_support())
 		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
 	else
-		writel_relaxed(virt_to_phys(omap5_secondary_startup),
-			       base + OMAP_AUX_CORE_BOOT_1);
+		/*
+		 * If the boot CPU is in HYP mode then start secondary
+		 * CPU in HYP mode as well.
+		 */
+		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+			writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
+				       base + OMAP_AUX_CORE_BOOT_1);
+		else
+			writel_relaxed(virt_to_phys(omap5_secondary_startup),
+				       base + OMAP_AUX_CORE_BOOT_1);
 
 }
 

arch/arm/mach-omap2/omap4-common.c

@@ -256,6 +256,38 @@ static int __init omap4_sar_ram_init(void)
 }
 omap_early_initcall(omap4_sar_ram_init);
 
+static struct of_device_id gic_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", },
+	{ .compatible = "arm,cortex-a15-gic", },
+	{ },
+};
+
+static struct device_node *gic_node;
+
+unsigned int omap4_xlate_irq(unsigned int hwirq)
+{
+	struct of_phandle_args irq_data;
+	unsigned int irq;
+
+	if (!gic_node)
+		gic_node = of_find_matching_node(NULL, gic_match);
+
+	if (WARN_ON(!gic_node))
+		return hwirq;
+
+	irq_data.np = gic_node;
+	irq_data.args_count = 3;
+	irq_data.args[0] = 0;
+	irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
+	irq_data.args[2] = IRQ_TYPE_LEVEL_HIGH;
+
+	irq = irq_create_of_mapping(&irq_data);
+	if (WARN_ON(!irq))
+		irq = hwirq;
+
+	return irq;
+}
+
 void __init omap_gic_of_init(void)
 {
 	struct device_node *np;

arch/arm/mach-omap2/omap_hwmod.c

@@ -3534,9 +3534,15 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 
 	mpu_irqs_cnt = _count_mpu_irqs(oh);
 	for (i = 0; i < mpu_irqs_cnt; i++) {
+		unsigned int irq;
+
+		if (oh->xlate_irq)
+			irq = oh->xlate_irq((oh->mpu_irqs + i)->irq);
+		else
+			irq = (oh->mpu_irqs + i)->irq;
 		(res + r)->name = (oh->mpu_irqs + i)->name;
-		(res + r)->start = (oh->mpu_irqs + i)->irq;
-		(res + r)->end = (oh->mpu_irqs + i)->irq;
+		(res + r)->start = irq;
+		(res + r)->end = irq;
 		(res + r)->flags = IORESOURCE_IRQ;
 		r++;
 	}

arch/arm/mach-omap2/omap_hwmod.h

@@ -676,6 +676,7 @@ struct omap_hwmod {
 	spinlock_t			_lock;
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
+	unsigned int			(*xlate_irq)(unsigned int);
 	u16				flags;
 	u8				mpu_rt_idx;
 	u8				response_lat;

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -479,6 +479,7 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = {
 	.class		= &omap44xx_dma_hwmod_class,
 	.clkdm_name	= "l3_dma_clkdm",
 	.mpu_irqs	= omap44xx_dma_system_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.main_clk	= "l3_div_ck",
 	.prcm = {
 		.omap4 = {
@@ -640,6 +641,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.class		= &omap44xx_dispc_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_dispc_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_dispc_sdma_reqs,
 	.main_clk	= "dss_dss_clk",
 	.prcm = {
@@ -693,6 +695,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
 	.class		= &omap44xx_dsi_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_dsi1_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_dsi1_sdma_reqs,
 	.main_clk	= "dss_dss_clk",
 	.prcm = {
@@ -726,6 +729,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
 	.class		= &omap44xx_dsi_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_dsi2_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_dsi2_sdma_reqs,
 	.main_clk	= "dss_dss_clk",
 	.prcm = {
@@ -784,6 +788,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	 */
 	.flags		= HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
 	.main_clk	= "dss_48mhz_clk",
 	.prcm = {

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -288,6 +288,7 @@ static struct omap_hwmod omap54xx_dma_system_hwmod = {
 	.class		= &omap54xx_dma_hwmod_class,
 	.clkdm_name	= "dma_clkdm",
 	.mpu_irqs	= omap54xx_dma_system_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/prcm-common.h

@@ -498,6 +498,7 @@ struct omap_prcm_irq_setup {
 	u8 nr_irqs;
 	const struct omap_prcm_irq *irqs;
 	int irq;
+	unsigned int (*xlate_irq)(unsigned int);
 	void (*read_pending_irqs)(unsigned long *events);
 	void (*ocp_barrier)(void);
 	void (*save_and_clear_irqen)(u32 *saved_mask);

arch/arm/mach-omap2/prm44xx.c

@@ -49,6 +49,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.irqs			= omap4_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
 	.irq			= 11 + OMAP44XX_IRQ_GIC_START,
+	.xlate_irq		= omap4_xlate_irq,
 	.read_pending_irqs	= &omap44xx_prm_read_pending_irqs,
 	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,
@@ -751,8 +752,10 @@ static int omap44xx_prm_late_init(void)
 		}
 
 		/* Once OMAP4 DT is filled as well */
-		if (irq_num >= 0)
+		if (irq_num >= 0) {
 			omap4_prcm_irq_setup.irq = irq_num;
+			omap4_prcm_irq_setup.xlate_irq = NULL;
+		}
 	}
 
 	omap44xx_prm_enable_io_wakeup();

arch/arm/mach-omap2/prm_common.c

@@ -187,6 +187,7 @@ int omap_prcm_event_to_irq(const char *name)
  */
 void omap_prcm_irq_cleanup(void)
 {
+	unsigned int irq;
 	int i;
 
 	if (!prcm_irq_setup) {
@@ -211,7 +212,11 @@ void omap_prcm_irq_cleanup(void)
 	kfree(prcm_irq_setup->priority_mask);
 	prcm_irq_setup->priority_mask = NULL;
 
-	irq_set_chained_handler(prcm_irq_setup->irq, NULL);
+	if (prcm_irq_setup->xlate_irq)
+		irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq);
+	else
+		irq = prcm_irq_setup->irq;
+	irq_set_chained_handler(irq, NULL);
 
 	if (prcm_irq_setup->base_irq > 0)
 		irq_free_descs(prcm_irq_setup->base_irq,
@@ -259,6 +264,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	int offset, i;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
+	unsigned int irq;
 
 	if (!irq_setup)
 		return -EINVAL;
@@ -298,7 +304,11 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 				1 << (offset & 0x1f);
 	}
 
-	irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
+	if (irq_setup->xlate_irq)
+		irq = irq_setup->xlate_irq(irq_setup->irq);
+	else
+		irq = irq_setup->irq;
+	irq_set_chained_handler(irq, omap_prcm_irq_handler);
 
 	irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
 		0);

arch/arm/mach-omap2/timer.c

@@ -54,6 +54,7 @@
 
 #include "soc.h"
 #include "common.h"
+#include "control.h"
 #include "powerdomain.h"
 #include "omap-secure.h"
 
@@ -496,7 +497,8 @@ static void __init realtime_counter_init(void)
 	void __iomem *base;
 	static struct clk *sys_clk;
 	unsigned long rate;
-	unsigned int reg, num, den;
+	unsigned int reg;
+	unsigned long long num, den;
 
 	base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
 	if (!base) {
@@ -511,13 +513,42 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+
+	if (soc_is_dra7xx()) {
+		/*
+		 * Errata i856 says the 32.768KHz crystal does not start at
+		 * power on, so the CPU falls back to an emulated 32KHz clock
+		 * based on sysclk / 610 instead. This causes the master counter
+		 * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2
+		 * (OR sysclk * 75 / 244)
+		 *
+		 * This affects at least the DRA7/AM572x 1.0, 1.1 revisions.
+		 * Of course any board built without a populated 32.768KHz
+		 * crystal would also need this fix even if the CPU is fixed
+		 * later.
+		 *
+		 * Either case can be detected by using the two speedselect bits
+		 * If they are not 0, then the 32.768KHz clock driving the
+		 * coarse counter that corrects the fine counter every time it
+		 * ticks is actually rate/610 rather than 32.768KHz and we
+		 * should compensate to avoid the 570ppm (at 20MHz, much worse
+		 * at other rates) too fast system time.
+		 */
+		reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP);
+		if (reg & DRA7_SPEEDSELECT_MASK) {
+			num = 75;
+			den = 244;
+			goto sysclk1_based;
+		}
+	}
+
 	/* Numerator/denumerator values refer TRM Realtime Counter section */
 	switch (rate) {
-	case 1200000:
+	case 12000000:
 		num = 64;
 		den = 125;
 		break;
-	case 1300000:
+	case 13000000:
 		num = 768;
 		den = 1625;
 		break;
@@ -529,11 +560,11 @@ static void __init realtime_counter_init(void)
 		num = 192;
 		den = 625;
 		break;
-	case 2600000:
+	case 26000000:
 		num = 384;
 		den = 1625;
 		break;
-	case 2700000:
+	case 27000000:
 		num = 256;
 		den = 1125;
 		break;
@@ -545,6 +576,7 @@ static void __init realtime_counter_init(void)
 		break;
 	}
 
+sysclk1_based:
 	/* Program numerator and denumerator registers */
 	reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
@@ -556,7 +588,7 @@ static void __init realtime_counter_init(void)
 	reg |= den;
 	writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
-	arch_timer_freq = (rate / den) * num;
+	arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den);
 	set_cntfreq();
 
 	iounmap(base);

arch/arm/mach-omap2/twl-common.c

@@ -66,19 +66,24 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+#ifdef CONFIG_ARCH_OMAP4
 void __init omap4_pmic_init(const char *pmic_type,
 		    struct twl4030_platform_data *pmic_data,
 		    struct i2c_board_info *devices, int nr_devices)
 {
 	/* PMIC part*/
+	unsigned int irq;
+
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
-	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
+	irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START);
+	omap_pmic_init(1, 400, pmic_type, irq, pmic_data);
 
 	/* Register additional devices on i2c1 bus if needed */
 	if (devices)
 		i2c_register_board_info(1, devices, nr_devices);
 }
+#endif
 
 void __init omap_pmic_late_init(void)
 {

arch/arm/mach-rockchip/rockchip.c

@@ -19,11 +19,37 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "core.h"
 
+#define RK3288_GRF_SOC_CON0 0x244
+
+static void __init rockchip_timer_init(void)
+{
+	if (of_machine_is_compatible("rockchip,rk3288")) {
+		struct regmap *grf;
+
+		/*
+		 * Disable auto jtag/sdmmc switching that causes issues
+		 * with the mmc controllers making them unreliable
+		 */
+		grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf");
+		if (!IS_ERR(grf))
+			regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000);
+		else
+			pr_err("rockchip: could not get grf syscon\n");
+	}
+
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
 static void __init rockchip_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = {
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
+	.init_time	= rockchip_timer_init,
 	.dt_compat	= rockchip_board_dt_compat,
 	.init_machine	= rockchip_dt_init,
 MACHINE_END

arch/arm/mach-shmobile/board-ape6evm.c

@@ -18,6 +18,8 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/kernel.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
@@ -273,6 +275,22 @@ static void __init ape6evm_add_standard_devices(void)
 				      sizeof(ape6evm_leds_pdata));
 }
 
+static void __init ape6evm_legacy_init_time(void)
+{
+	/* Do not invoke DT-based timers via clocksource_of_init() */
+}
+
+static void __init ape6evm_legacy_init_irq(void)
+{
+	void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000);
+
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+
+	/* Do not invoke DT-based interrupt code via irqchip_init() */
+}
+
+
 static const char *ape6evm_boards_compat_dt[] __initdata = {
 	"renesas,ape6evm",
 	NULL,
@@ -280,7 +298,9 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
 	.init_early	= shmobile_init_delay,
+	.init_irq       = ape6evm_legacy_init_irq,
 	.init_machine	= ape6evm_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= ape6evm_boards_compat_dt,
+	.init_time	= ape6evm_legacy_init_time,
 MACHINE_END

arch/arm/mach-shmobile/board-lager.c

@@ -21,6 +21,8 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/mfd/tmio.h>
@@ -811,6 +813,16 @@ static void __init lager_init(void)
 					  lager_ksz8041_fixup);
 }
 
+static void __init lager_legacy_init_irq(void)
+{
+	void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000);
+
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+
+	/* Do not invoke DT-based interrupt code via irqchip_init() */
+}
+
 static const char * const lager_boards_compat_dt[] __initconst = {
 	"renesas,lager",
 	NULL,
@@ -819,6 +831,7 @@ static const char * const lager_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(LAGER_DT, "lager")
 	.smp		= smp_ops(r8a7790_smp_ops),
 	.init_early	= shmobile_init_delay,
+	.init_irq	= lager_legacy_init_irq,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_init,
 	.init_late	= shmobile_init_late,

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -800,7 +800,14 @@ void __init r8a7740_init_irq_of(void)
 	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
 	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
 
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
 	irqchip_init();
+#endif
 
 	/* route signals to GIC */
 	iowrite32(0x0, pfc_inta_ctrl);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -576,11 +576,18 @@ void __init r8a7778_init_irq_extpin(int irlm)
 void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
+#endif
 
 	BUG_ON(!base);
 
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
 	irqchip_init();
-
+#endif
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -720,10 +720,17 @@ static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
 
 void __init r8a7779_init_irq_dt(void)
 {
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	void __iomem *gic_dist_base = ioremap_nocache(0xf0001000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xf0000100, 0x1000);
+#endif
 	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
 
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
 	irqchip_init();
-
+#endif
 	/* route all interrupts to ARM */
 	__raw_writel(0xffffffff, INT2NTSR0);
 	__raw_writel(0x3fffffff, INT2NTSR1);

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -133,7 +133,9 @@ void __init rcar_gen2_timer_init(void)
 #ifdef CONFIG_COMMON_CLK
 	rcar_gen2_clocks_init(mode);
 #endif
+#ifdef CONFIG_ARCH_SHMOBILE_MULTI
 	clocksource_of_init();
+#endif
 }
 
 struct memory_reserve_config {