Merge tag 'imx-dt-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/late

Pull "The i.MX device tree updates for 4.1" from Shawn Guo:

 - Convert GPC controller to use stacked interrupt domains
 - Add power domain descriptions for i.MX6 platforms
 - Improve i.MX25 pin function defines
 - Disable PWM devices in <soc>.dtsi by default and enable it at board
   level dts where the device is actually available.
 - Define labels for SNVS RTC device to ease the board description,
   where an external RTC is available.
 - Add dr_mode host setting to all i.MX host-only USB instances
 - Support Miscellaneous System Control Module (MSCM) for VF610
 - Add initial i.MX6SL WaRP Board support
 - Add i.MX6SX SDB revision B board support
 - A bunch of imx28-apf28dev board updates, including gpio polarity
   correction and CAN, AUART device support.
 - SolidRun iMX6 platform updates: dual-license of GPLv2/X11, PWM
   setup, PCF8523 RTC, GPIO key and SGTL5000 audio support.
 - A number of random device additions for boards: SPI and CAN for
   vf-colibri, MAX7310 GPIO expander for imx6qdl-sabreauto and LCD
   support for imx25-pdk.

Note: Branch imx/cleanup was merged as the base to solve conflict on
imx25 iomux header.  Branch imx/soc was merged as the base to solve
conflict on arch/arm/mach-imx/gpc.c.  And Jason Cooper's irqchip/vybrid
branch was pulled into the base as a run-time dependency.

* tag 'imx-dt-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
  ARM: dts: hummingboard: add sgtl5000 support for Hummingboard Pro
  ARM: dts: imx25-pinfunc: Add several pinfunctions
  ARM: dts: vf610: fix missing irqs
  ARM: dts: cubox: Map gpio-keys to gpio3 8
  ARM: dts: hummingboard: Setup pwm lines
  ARM: dts: hummingboard: enable PCF8523 RTC support
  ARM: dts: Re-license SolidRun iMX6 platform DT GPL v2/X11
  ARM: dts: imx28: add alternative pinmuxing for spi3
  ARM: dts: imx6sx: Add label snvs_rtc
  ARM: dts: imx6sl: Add label snvs_rtc
  ARM: imx6: Warn when an old DT is detected
  ARM: imx6: Allow GPC interrupts affinity to be changed
  ARM: imx6qdl-sabreauto.dtsi: add max7310 support
  ARM: dts: imx6sl-warp: Add BCM4330 support
  ARM: dts: imx28-apf28dev: add wakeup function to user button
  ARM: dts: imx28-apf28dev: fix user button polarity
  ARM: dts: imx25-pinfunc: remove input values for pinfuncs without input register
  ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)
  ARM: dts: imx6sl-warp: Pass 'bus-width' property
  ARM: dts: imx6qdl: disable PWMs by default
  ...

Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt

@@ -0,0 +1,14 @@
+Freescale Vybrid Miscellaneous System Control - CPU Configuration
+
+The MSCM IP contains multiple sub modules, this binding describes the first
+block of registers which contains CPU configuration information.
+
+Required properties:
+- compatible:	"fsl,vf610-mscm-cpucfg", "syscon"
+- reg:		the register range of the MSCM CPU configuration registers
+
+Example:
+	mscm_cpucfg: cpucfg@40001000 {
+		compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+		reg = <0x40001000 0x800>;
+	}

Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt

@@ -0,0 +1,33 @@
+Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+The MSCM IP contains multiple sub modules, this binding describes the second
+block of registers which control the interrupt router. The interrupt router
+allows to configure the recipient of each peripheral interrupt. Furthermore
+it controls the directed processor interrupts. The module is available in all
+Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+which comes with a Cortex-A5/Cortex-M4 combination).
+
+Required properties:
+- compatible:		"fsl,vf610-mscm-ir"
+- reg:			the register range of the MSCM Interrupt Router
+- fsl,cpucfg:		The handle to the MSCM CPU configuration node, required
+			to get the current CPU ID
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Two cells, interrupt number and cells.
+			The hardware interrupt number according to interrupt
+			assignment of the interrupt router is required.
+			Flags get passed only when using GIC as parent. Flags
+			encoding as documented by the GIC bindings.
+- interrupt-parent:	Should be the phandle for the interrupt controller of
+			the CPU the device tree is intended to be used on. This
+			is either the node of the GIC or NVIC controller.
+
+Example:
+	mscm_ir: interrupt-controller@40001800 {
+		compatible = "fsl,vf610-mscm-ir";
+		reg = <0x40001800 0x400>;
+		fsl,cpucfg = <&mscm_cpucfg>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&intc>;
+	}

Documentation/devicetree/bindings/power/fsl,imx-gpc.txt

@@ -0,0 +1,59 @@
+Freescale i.MX General Power Controller
+=======================================
+
+The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
+counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
+domains.
+
+Required properties:
+- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain GPC interrupt request 1
+- pu-supply: Link to the LDO regulator powering the PU power domain
+- clocks: Clock phandles to devices in the PU power domain that need
+	  to be enabled during domain power-up for reset propagation.
+- #power-domain-cells: Should be 1, see below:
+
+The gpc node is a power-controller as documented by the generic power domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+
+Example:
+
+	gpc: gpc@020dc000 {
+		compatible = "fsl,imx6q-gpc";
+		reg = <0x020dc000 0x4000>;
+		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+		pu-supply = <&reg_pu>;
+		clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+			 <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+			 <&clks IMX6QDL_CLK_GPU2D_CORE>,
+			 <&clks IMX6QDL_CLK_GPU2D_AXI>,
+			 <&clks IMX6QDL_CLK_OPENVG_AXI>,
+			 <&clks IMX6QDL_CLK_VPU_AXI>;
+		#power-domain-cells = <1>;
+	};
+
+
+Specifying power domain for IP modules
+======================================
+
+IP cores belonging to a power domain should contain a 'power-domains' property
+that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
+the power domain the device belongs to.
+
+Example of a device that is part of the PU power domain:
+
+	vpu: vpu@02040000 {
+		reg = <0x02040000 0x3c000>;
+		/* ... */
+		power-domains = <&gpc 1>;
+		/* ... */
+	};
+
+The following DOMAIN_INDEX values are valid for i.MX6Q:
+ARM_DOMAIN     0
+PU_DOMAIN      1
+The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+DISPLAY_DOMAIN 2

arch/arm/boot/dts/Makefile

@@ -299,9 +299,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-wandboard.dtb \
 	imx6q-wandboard-revb1.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
-	imx6sl-evk.dtb
+	imx6sl-evk.dtb \
+	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sabreauto.dtb \
+	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \

arch/arm/boot/dts/imx25-pdk.dts

@@ -75,6 +75,27 @@
 		mux-int-port = <1>;
 		mux-ext-port = <4>;
 	};
+
+	wvga: display {
+		model = "CLAA057VC01CW";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&wvga_timings>;
+		display-timings {
+			wvga_timings: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <45>;
+				hfront-porch = <114>;
+				hsync-len = <1>;
+				vback-porch = <33>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock-frequency = <25200000>;
+			};
+		};
+	};
 };
 
 &audmux {
@@ -190,6 +211,33 @@
 			>;
 		};
 
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0		0xe0
+				MX25_PAD_LD1__LD1		0xe0
+				MX25_PAD_LD2__LD2		0xe0
+				MX25_PAD_LD3__LD3		0xe0
+				MX25_PAD_LD4__LD4		0xe0
+				MX25_PAD_LD5__LD5		0xe0
+				MX25_PAD_LD6__LD6		0xe0
+				MX25_PAD_LD7__LD7		0xe0
+				MX25_PAD_LD8__LD8		0xe0
+				MX25_PAD_LD9__LD9		0xe0
+				MX25_PAD_LD10__LD10		0xe0
+				MX25_PAD_LD11__LD11		0xe0
+				MX25_PAD_LD12__LD12		0xe0
+				MX25_PAD_LD13__LD13		0xe0
+				MX25_PAD_LD14__LD14		0xe0
+				MX25_PAD_LD15__LD15		0xe0
+				MX25_PAD_GPIO_E__LD16		0xe0
+				MX25_PAD_GPIO_F__LD17		0xe0
+				MX25_PAD_HSYNC__HSYNC		0xe0
+				MX25_PAD_VSYNC__VSYNC		0xe0
+				MX25_PAD_LSCLK__LSCLK		0xe0
+				MX25_PAD_OE_ACD__OE_ACD		0xe0
+				MX25_PAD_CONTRAST__CONTRAST	0xe0
+			>;
+		};
 
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
@@ -202,6 +250,16 @@
 	};
 };
 
+&lcdc {
+	display = <&wvga>;
+	fsl,lpccr = <0x00a903ff>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+};
+
 &nfc {
 	nand-on-flash-bbt;
 	status = "okay";

arch/arm/boot/dts/imx25-pinfunc.h

@@ -17,48 +17,69 @@
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
 
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
 #define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
 #define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
 
 #define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
 #define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+#define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
 
 #define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
 #define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x16 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x17 0x000
 
 #define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
 #define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x16 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x17 0x000
 
 #define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
 #define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x16 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x17 0x000
 
 #define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
 #define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x16 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x17 0x000
 
 #define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
 #define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x16 0x000
 #define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
 
 #define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__FEC_RX_ER			0x024 0x240 0x518 0x17 0x000
 #define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x16 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x17 0x000
 
 #define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
 #define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x16 0x000
 #define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
 
 #define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
 #define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x16 0x000
 #define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
 
 #define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
 #define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x16 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
 
 #define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
 #define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x16 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x17 0x000
 
 #define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
 #define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x16 0x000
 #define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
 
 #define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
@@ -133,20 +154,25 @@
 #define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
 #define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
 #define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
+#define MX25_PAD_D15__SDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
 
 #define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
 #define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
 #define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
+#define MX25_PAD_D14__SDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
 
 #define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
 #define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
 #define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
+#define MX25_PAD_D13__SDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
 
 #define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
 #define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
+#define MX25_PAD_D12__SDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
 
 #define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
 #define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
+#define MX25_PAD_D11__USBOTG_PWR		0x098 0x290 0x000 0x06 0x000
 
 #define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
 #define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
@@ -212,26 +238,33 @@
 
 #define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
 #define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
+#define MX25_PAD_LD8__SDHC2_CMD			0x0e8 0x2e0 0x4e0 0x06 0x000
 
 #define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
 #define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
+#define MX25_PAD_LD9__SDHC2_CLK			0x0ec 0x2e4 0x4dc 0x06 0x000
 
 #define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ER		0x0f0 0x2e8 0x518 0x15 0x001
+#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x15 0x001
 
 #define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
 #define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
+#define MX25_PAD_LD11__SDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
 
 #define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
 #define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
 
 #define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
 #define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
 
 #define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
 #define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
 
 #define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
 #define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
 
 #define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
@@ -244,6 +277,7 @@
 #define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
 
 #define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
 #define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
 
 #define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
@@ -257,26 +291,31 @@
 
 #define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
 #define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
 #define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
 #define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
 
 #define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
 #define MX25_PAD_CSI_D3__UART5_TXD_MUX		0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
 #define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
 #define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
 
 #define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
 #define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__SIM1_VEN0		0x128 0x320 0x000 0x04 0x000
 #define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
 #define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
 
 #define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x11 0x001
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
 #define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
 #define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
 
 #define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
 #define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
 #define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
 
 #define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
@@ -284,32 +323,32 @@
 #define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
 
 #define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x12 0x001
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x12 0x000
 #define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
 #define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x17 0x000
 
 #define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x12 0x001
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x12 0x000
 #define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
 #define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x17 0x000
 
 #define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x11 0x001
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x11 0x000
 #define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x12 0x001
 #define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
 
 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x11 0x001
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x11 0x000
 #define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x12 0x001
 #define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
 
 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x11 0x001
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x11 0x000
 #define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x12 0x001
 #define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
 
 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x11 0x001
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x11 0x000
 #define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x12 0x001
 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
 
@@ -369,8 +408,8 @@
 #define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x13 0x000
 #define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ER		0x18c 0x384 0x518 0x12 0x002
 #define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x12 0x002
 #define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
 
 #define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
@@ -392,11 +431,11 @@
 #define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
 
 #define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x12 0x002
 #define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
 
 #define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x12 0x002
 #define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
@@ -410,7 +449,7 @@
 #define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
 
 #define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_LD1		0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x13 0x002
 #define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
 
 #define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
@@ -455,9 +494,18 @@
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
 
 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_TX but that's wrong.
+ */
+#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x14 0x000
 #define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
 
 #define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_RX but that's wrong.
+ */
 #define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
 #define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
 
@@ -471,30 +519,34 @@
 #define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
 #define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
 
-#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
-
 #define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
 #define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
 #define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
 
 #define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
 #define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
 
 #define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x11 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x12 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x13 0x001
 #define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
 
 #define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x12 0x001
 #define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
 
 #define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
 #define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x11 0x002
 #define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x12 0x000
 #define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x16 0x002
 
 #define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
 #define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x12 0x000
 #define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x16 0x000
 
 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
 #define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
@@ -505,6 +557,7 @@
 #define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
 #define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
+
 #define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
 #define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
 
@@ -517,6 +570,7 @@
 
 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+
 #define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
 

arch/arm/boot/dts/imx27.dtsi

@@ -488,6 +488,7 @@
 				interrupts = <54>;
 				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -497,6 +498,7 @@
 				interrupts = <55>;
 				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx28-apf28.dts

@@ -78,7 +78,7 @@
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/imx28-apf28dev.dts

@@ -110,6 +110,13 @@
 					};
 				};
 			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				xceiver-supply = <&reg_can0_vcc>;
+				status = "okay";
+			};
 		};
 
 		apbx@80040000 {
@@ -130,6 +137,13 @@
 				status = "okay";
 			};
 
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				fsl,uart-has-rtscts;
+				status = "okay";
+			};
+
 			usbphy0: usbphy@8007c000 {
 				status = "okay";
 			};
@@ -143,7 +157,8 @@
 	ahb@80080000 {
 		usb0: usb@80080000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev>;
+			pinctrl-0 = <&usb0_otg_apf28dev
+					&usb0_id_pins_b>;
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
@@ -156,7 +171,7 @@
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio0 23 0>;
+			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 	};
@@ -175,6 +190,14 @@
 			gpio = <&gpio1 23 1>;
 			enable-active-high;
 		};
+
+		reg_can0_vcc: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "can0_vcc";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
 	};
 
 	leds {
@@ -200,8 +223,9 @@
 
 		user-button {
 			label = "User button";
-			gpios = <&gpio0 17 0>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
+			gpio-key,wakeup;
 		};
 	};
 };

arch/arm/boot/dts/imx28.dtsi

@@ -829,6 +829,19 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				spi3_pins_b: spi3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				usb0_pins_a: usb0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -1197,6 +1210,7 @@
 			interrupts = <92>;
 			clocks = <&clks 61>;
 			fsl,usbphy = <&usbphy1>;
+			dr_mode = "host";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/imx35.dtsi

@@ -318,6 +318,7 @@
 				clocks = <&clks 73>;
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx50.dtsi

@@ -197,6 +197,7 @@
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
 				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -205,6 +206,7 @@
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -213,6 +215,7 @@
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx51.dtsi

@@ -265,6 +265,7 @@
 				interrupts = <14>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -274,6 +275,7 @@
 				interrupts = <16>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -283,6 +285,7 @@
 				interrupts = <17>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx53.dtsi

@@ -309,6 +309,7 @@
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -318,6 +319,7 @@
 				interrupts = <16>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -327,6 +329,7 @@
 				interrupts = <17>;
 				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6dl-aristainetos_4.dts

@@ -83,3 +83,7 @@
 &ipu1_di0_disp0 {
 	remote-endpoint = <&display0_in>;
 };
+
+&pwm1 {
+	status = "okay";
+};

arch/arm/boot/dts/imx6dl-aristainetos_7.dts

@@ -72,3 +72,7 @@
 &ipu1_di0_disp0 {
 	remote-endpoint = <&display0_in>;
 };
+
+&pwm3 {
+	status = "okay";
+};

arch/arm/boot/dts/imx6dl-cubox-i.dts

@@ -1,5 +1,43 @@
 /*
  * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -1,6 +1,44 @@
 /*
  * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
  * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6q-cubox-i.dts

@@ -1,5 +1,43 @@
 /*
  * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6q-hummingboard.dts

@@ -1,6 +1,44 @@
 /*
  * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
  * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6q.dtsi

@@ -294,19 +294,21 @@
 };
 
 &mipi_dsi {
-	port@2 {
-		reg = <2>;
+	ports {
+		port@2 {
+			reg = <2>;
 
-		mipi_mux_2: endpoint {
-			remote-endpoint = <&ipu2_di0_mipi>;
+			mipi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_mipi>;
+			};
 		};
-	};
 
-	port@3 {
-		reg = <3>;
+		port@3 {
+			reg = <3>;
 
-		mipi_mux_3: endpoint {
-			remote-endpoint = <&ipu2_di1_mipi>;
+			mipi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_mipi>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -1,8 +1,48 @@
 /*
  * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include "imx6qdl-microsom.dtsi"
 #include "imx6qdl-microsom-ar8035.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	ir_recv: ir-receiver {
@@ -66,6 +106,18 @@
 		spdif-controller = <&spdif>;
 		spdif-out;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Button 0";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
 };
 
 &hdmi {
@@ -170,9 +222,19 @@
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
 			>;
 		};
+
+		pinctrl_gpio_key: gpio-key {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
+			>;
+		};
 	};
 };
 
+&pwm1 {
+	status = "okay";
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_spdif>;

arch/arm/boot/dts/imx6qdl-hummingboard.dtsi

@@ -1,5 +1,43 @@
 /*
  * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include "imx6qdl-microsom.dtsi"
 #include "imx6qdl-microsom-ar8035.dtsi"
@@ -50,6 +88,19 @@
 		};
 	};
 
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "On-board SPDIF";
@@ -59,6 +110,10 @@
 	};
 };
 
+&audmux {
+	status = "okay";
+};
+
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
@@ -75,16 +130,24 @@
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-
-	/*
-	 * Not fitted on Carrier-1 board... yet
 	status = "okay";
 
+	/* Pro baseboard model */
 	rtc: pcf8523@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
-	 */
+
+	/* Pro baseboard model */
+	sgtl5000: sgtl5000@0a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
 };
 
 &i2c2 {
@@ -129,6 +192,20 @@
 			>;
 		};
 
+		pinctrl_hummingboard_pwm1: pwm1grp {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+		};
+
+		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
 		pinctrl_hummingboard_spdif: hummingboard-spdif {
 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
@@ -168,12 +245,28 @@
 	};
 };
 
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 pinctrl-names = "default";
+	 status = "okay";
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
 	status = "okay";
 };
 
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
 &usbh1 {
 	disable-over-current;
 	vbus-supply = <&reg_usbh1_vbus>;

arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi

@@ -3,6 +3,44 @@
  *
  * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
  * MicroSOM.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 &fec {
 	pinctrl-names = "default";

arch/arm/boot/dts/imx6qdl-microsom.dtsi

@@ -1,5 +1,43 @@
 /*
  * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &iomuxc {

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -182,6 +182,34 @@
 	};
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	max7310_a: gpio@30 {
+		compatible = "maxim,max7310";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_b: gpio@32 {
+		compatible = "maxim,max7310";
+		reg = <0x32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_c: gpio@34 {
+		compatible = "maxim,max7310";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -265,6 +293,13 @@
 			>;
 		};
 
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1

arch/arm/boot/dts/imx6qdl.dtsi

@@ -53,6 +53,7 @@
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
 	};
 
 	clocks {
@@ -82,7 +83,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
+		interrupt-parent = <&gpc>;
 		ranges;
 
 		dma_apbh: dma-apbh@00110000 {
@@ -122,6 +123,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			interrupt-parent = <&intc>;
 			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};
 
@@ -357,6 +359,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM1>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			pwm2: pwm@02084000 {
@@ -367,6 +370,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM2>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			pwm3: pwm@02088000 {
@@ -377,6 +381,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM3>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			pwm4: pwm@0208c000 {
@@ -387,6 +392,7 @@
 				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_PWM4>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			can1: flexcan@02090000 {
@@ -598,7 +604,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
+					regulator-enable-ramp-delay = <150>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
@@ -658,7 +664,7 @@
 				#size-cells = <1>;
 				ranges = <0 0x020cc000 0x4000>;
 
-				snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -693,8 +699,19 @@
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				pu-supply = <&reg_pu>;
+				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+					 <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+					 <&clks IMX6QDL_CLK_GPU2D_CORE>,
+					 <&clks IMX6QDL_CLK_GPU2D_AXI>,
+					 <&clks IMX6QDL_CLK_OPENVG_AXI>,
+					 <&clks IMX6QDL_CLK_VPU_AXI>;
+				#power-domain-cells = <1>;
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
@@ -845,6 +862,7 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -854,6 +872,7 @@
 				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -863,6 +882,7 @@
 				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 
@@ -1022,19 +1042,24 @@
 				reg = <0x021e0000 0x4000>;
 				status = "disabled";
 
-				port@0 {
-					reg = <0>;
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
 
-					mipi_mux_0: endpoint {
-						remote-endpoint = <&ipu1_di0_mipi>;
+						mipi_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_mipi>;
+						};
 					};
-				};
 
-				port@1 {
-					reg = <1>;
+					port@1 {
+						reg = <1>;
 
-					mipi_mux_1: endpoint {
-						remote-endpoint = <&ipu1_di1_mipi>;
+						mipi_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_mipi>;
+						};
 					};
 				};
 			};

arch/arm/boot/dts/imx6sl-warp.dts

@@ -0,0 +1,262 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "WaRP Board";
+	compatible = "warp,imx6sl-warp", "fsl,imx6sl";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+		};
+
+		reg_1p8v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
+			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6sl-warp {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_D12__UART2_RX_DATA	0x41b0b1
+				MX6SL_PAD_EPDC_D13__UART2_TX_DATA	0x41b0b1
+				MX6SL_PAD_EPDC_D14__UART2_RTS_B		0x4130B1
+				MX6SL_PAD_EPDC_D15__UART2_CTS_B		0x4130B1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
+				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
+			>;
+		};
+	};
+};

arch/arm/boot/dts/imx6sl.dtsi

@@ -72,6 +72,7 @@
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
 	};
 
 	clocks {
@@ -95,7 +96,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
+		interrupt-parent = <&gpc>;
 		ranges;
 
 		ocram: sram@00900000 {
@@ -568,7 +569,7 @@
 				#size-cells = <1>;
 				ranges = <0 0x020cc000 0x4000>;
 
-				snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -603,7 +604,14 @@
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				pu-supply = <&reg_pu>;
+				clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+					 <&clks IMX6SL_CLK_GPU2D_PODF>;
+				#power-domain-cells = <1>;
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
@@ -699,6 +707,7 @@
 				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6sx-sdb-reva.dts

@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB RevA Board";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: s25fl128s@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s";
+		spi-max-frequency = <66000000>;
+	};
+
+	flash1: s25fl128s@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s";
+		spi-max-frequency = <66000000>;
+	};
+};

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -1,197 +1,40 @@
 /*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
+#include "imx6sx-sdb.dtsi"
 
 / {
-	model = "Freescale i.MX6 SoloX SDB Board";
-	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vcc_sd3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_vcc_sd3>;
-			regulator-name = "VCC_SD3";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg1>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg2_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg2>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_psu_5v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "PSU-5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_lcd_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "lcd-3v3";
-			gpio = <&gpio3 27 0>;
-			enable-active-high;
-		};
-
-		reg_peri_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_peri_3v3>;
-			regulator-name = "peri_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
-		reg_enet_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet_3v3>;
-			regulator-name = "enet_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <6>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
+	model = "Freescale i.MX6 SoloX SDB RevB Board";
 };
 
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-	};
+&cpu0 {
+	operating-points = <
+		/* kHz    uV */
+		996000  1250000
+		792000  1175000
+		396000  1175000
+		>;
+	fsl,soc-operating-points = <
+		/* ARM kHz      SOC uV */
+		996000	1250000
+		792000	1175000
+		396000	1175000
+	>;
 };
 
-&fec2 {
+&i2c1 {
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
-};
-
-&i2c1 {
-        clock-frequency = <100000>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_i2c1>;
-        status = "okay";
 
 	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
+		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
 		regulators {
@@ -203,14 +46,6 @@
 				regulator-ramp-delay = <6250>;
 			};
 
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
 			sw2_reg: sw2 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
@@ -232,11 +67,6 @@
 				regulator-always-on;
 			};
 
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
 			swbst_reg: swbst {
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5150000>;
@@ -292,401 +122,24 @@
 	};
 };
 
-&i2c4 {
-        clock-frequency = <100000>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_i2c4>;
-        status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SX_CLK_AUDIO>;
-		DCVDD-supply = <&vgen4_reg>;
-		DBVDD-supply = <&vgen4_reg>;
-		AVDD-supply = <&vgen4_reg>;
-		CPVDD-supply = <&vgen4_reg>;
-		MICVDD-supply = <&vgen3_reg>;
-		PLLVDD-supply = <&vgen4_reg>;
-		SPKVDD1-supply = <&reg_psu_5v>;
-		SPKVDD2-supply = <&reg_psu_5v>;
-	};
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <89>;
-				hfront-porch = <164>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				hsync-len = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
 &qspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: s25fl128s@0 {
-		reg = <0>;
+	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl128s";
-		spi-max-frequency = <66000000>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
 	};
 
-	flash1: s25fl128s@1 {
-		reg = <1>;
+	flash1: n25q256a@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl128s";
-		spi-max-frequency = <66000000>;
-	};
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart5 { /* for bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	enable-sdio-wakeup;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	enable-sdio-wakeup;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6x-sdb {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
-				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
-				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
-				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
-				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
-				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
-				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
-			>;
-		};
-
-		pinctrl_enet_3v3: enet3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
-				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
-				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
-				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
-				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
-				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
-				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
-			>;
-		};
-
-		pinctrl_peri_3v3: peri3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp-1 {
-			fsl,pins = <
-				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_qspi2: qspi2grp {
-			fsl,pins = <
-				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
-				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
-				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
-				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
-				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
-				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
-				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
-				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
-				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
-				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
-				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
-				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
-			>;
-		};
-
-		pinctrl_vcc_sd3: vccsd3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usb_otg1: usbotg1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
-			>;
-		};
-
-		pinctrl_usb_otg1_id: usbotg1idgrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usb_otg2: usbot2ggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-			>;
-		};
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <1>;
 	};
 };

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -0,0 +1,562 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc_sd3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_vcc_sd3>;
+			regulator-name = "VCC_SD3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg1>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg2>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_psu_5v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "PSU-5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_lcd_3v3: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-3v3";
+			gpio = <&gpio3 27 0>;
+			enable-active-high;
+		};
+
+		reg_peri_3v3: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_peri_3v3>;
+			regulator-name = "peri_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-always-on;
+		};
+
+		reg_enet_3v3: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet_3v3>;
+			regulator-name = "enet_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&i2c4 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c4>;
+        status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+			>;
+		};
+
+		pinctrl_enet_3v3: enet3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+			>;
+		};
+
+		pinctrl_peri_3v3: peri3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_qspi2: qspi2grp {
+			fsl,pins = <
+				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+	};
+};

arch/arm/boot/dts/imx6sx.dtsi

@@ -88,6 +88,7 @@
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
 	};
 
 	clocks {
@@ -131,7 +132,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
+		interrupt-parent = <&gpc>;
 		ranges;
 
 		pmu {
@@ -666,7 +667,7 @@
 				#size-cells = <1>;
 				ranges = <0 0x020cc000 0x4000>;
 
-				snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -700,7 +701,10 @@
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
 			};
 
 			iomuxc: iomuxc@020e0000 {
@@ -763,6 +767,7 @@
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
 				fsl,anatop = <&anatop>;
+				dr_mode = "host";
 				status = "disabled";
 			};
 

arch/arm/boot/dts/vf-colibri-eval-v3.dtsi

@@ -12,6 +12,12 @@
 		bootargs = "console=ttyLP0,115200";
 	};
 
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -47,6 +53,21 @@
 	status  = "okay";
 };
 
+&dspi1 {
+	status = "okay";
+
+	mcp2515can: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -94,3 +115,13 @@
 &usbh1 {
 	vbus-supply = <&usbh_vbus_reg>;
 };
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_can_int: can_int {
+			fsl,pins = <
+				VF610_PAD_PTB21__GPIO_43	0x22ed
+			>;
+		};
+	};
+};

arch/arm/boot/dts/vf-colibri.dtsi

@@ -23,6 +23,12 @@
 	status = "okay";
 };
 
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+};
+
 &edma0 {
 	status = "okay";
 };
@@ -107,6 +113,15 @@
 			>;
 		};
 
+		pinctrl_dspi1: dspi1grp {
+			fsl,pins = <
+				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+				VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+				VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+				VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+			>;
+		};
+
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
 				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef

arch/arm/boot/dts/vf500.dtsi

@@ -24,14 +24,13 @@
 	};
 
 	soc {
-		interrupt-parent = <&intc>;
-
 		aips-bus@40000000 {
 
 			intc: interrupt-controller@40002000 {
 				compatible = "arm,cortex-a9-gic";
 				#interrupt-cells = <3>;
 				interrupt-controller;
+				interrupt-parent = <&intc>;
 				reg = <0x40003000 0x1000>,
 				      <0x40002100 0x100>;
 			};
@@ -40,145 +39,17 @@
 				compatible = "arm,cortex-a9-global-timer";
 				reg = <0x40002200 0x20>;
 				interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};
 		};
 	};
 };
 
-&adc0 {
-	interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&adc1 {
-	interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&can0 {
-	interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&can1 {
-	interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dspi0 {
-	interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&edma0 {
-	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "edma-tx", "edma-err";
-};
-
-&edma1 {
-	interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "edma-tx", "edma-err";
-};
-
-&esdhc1 {
-	interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fec0 {
-	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fec1 {
-	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ftm {
-	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
-	interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
-	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio3 {
-	interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio4 {
-	interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c0 {
-	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&pit {
-	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&qspi0 {
-	interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sai2 {
-	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&snvsrtc {
-	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&src {
-	interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
-	interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
-	interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart2 {
-	interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart3 {
-	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart4 {
-	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart5 {
-	interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdev0 {
-	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbh1 {
-	interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbphy0 {
-	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbphy1 {
-	interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+&mscm_ir {
+	interrupt-parent = <&intc>;
 };
 
 &wdoga5 {
-	interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };

arch/arm/boot/dts/vfxxx.dtsi

@@ -54,6 +54,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
+		interrupt-parent = <&mscm_ir>;
 		ranges;
 
 		aips0: aips-bus@40000000 {
@@ -62,6 +63,19 @@
 			#size-cells = <1>;
 			ranges;
 
+			mscm_cpucfg: cpucfg@40001000 {
+				compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+				reg = <0x40001000 0x800>;
+			};
+
+			mscm_ir: interrupt-controller@40001800 {
+				compatible = "fsl,vf610-mscm-ir";
+				reg = <0x40001800 0x400>;
+				fsl,cpucfg = <&mscm_cpucfg>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
 			edma0: dma-controller@40018000 {
 				#dma-cells = <2>;
 				compatible = "fsl,vf610-edma";
@@ -69,6 +83,9 @@
 					<0x40024000 0x1000>,
 					<0x40025000 0x1000>;
 				dma-channels = <32>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+						<9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
 				clock-names = "dmamux0", "dmamux1";
 				clocks = <&clks VF610_CLK_DMAMUX0>,
 					<&clks VF610_CLK_DMAMUX1>;
@@ -78,6 +95,7 @@
 			can0: flexcan@40020000 {
 				compatible = "fsl,vf610-flexcan";
 				reg = <0x40020000 0x4000>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_FLEXCAN0>,
 					 <&clks VF610_CLK_FLEXCAN0>;
 				clock-names = "ipg", "per";
@@ -87,6 +105,7 @@
 			uart0: serial@40027000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40027000 0x1000>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 2>,
@@ -98,6 +117,7 @@
 			uart1: serial@40028000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40028000 0x1000>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 4>,
@@ -109,6 +129,7 @@
 			uart2: serial@40029000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40029000 0x1000>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 6>,
@@ -120,6 +141,7 @@
 			uart3: serial@4002a000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x4002a000 0x1000>;
+				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 8>,
@@ -133,15 +155,29 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x4002c000 0x1000>;
+				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <5>;
 				status = "disabled";
 			};
 
+			dspi1: dspi1@4002d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002d000 0x1000>;
+				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI1>;
+				clock-names = "dspi";
+				spi-num-chipselects = <5>;
+				status = "disabled";
+			};
+
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI2>;
 				clock-names = "sai";
 				dma-names = "tx", "rx";
@@ -153,6 +189,7 @@
 			pit: pit@40037000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_PIT>;
 				clock-names = "pit";
 			};
@@ -186,6 +223,7 @@
 			adc0: adc@4003b000 {
 				compatible = "fsl,vf610-adc";
 				reg = <0x4003b000 0x1000>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC0>;
 				clock-names = "adc";
 				status = "disabled";
@@ -194,6 +232,7 @@
 			wdoga5: wdog@4003e000 {
 				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 				reg = <0x4003e000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_WDT>;
 				clock-names = "wdog";
 				status = "disabled";
@@ -204,6 +243,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
 				reg = <0x40044000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI0_EN>,
 					<&clks VF610_CLK_QSPI0>;
 				clock-names = "qspi_en", "qspi";
@@ -213,7 +253,6 @@
 			iomuxc: iomuxc@40048000 {
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
-				#gpio-range-cells = <3>;
 			};
 
 			gpio0: gpio@40049000 {
@@ -221,6 +260,7 @@
 				reg = <0x40049000 0x1000 0x400ff000 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 0 32>;
@@ -231,6 +271,7 @@
 				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 32 32>;
@@ -241,6 +282,7 @@
 				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 64 32>;
@@ -251,6 +293,7 @@
 				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 96 32>;
@@ -261,6 +304,7 @@
 				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 128 7>;
@@ -274,6 +318,7 @@
 			usbphy0: usbphy@40050800 {
 				compatible = "fsl,vf610-usbphy";
 				reg = <0x40050800 0x400>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBPHY0>;
 				fsl,anatop = <&anatop>;
 				status = "disabled";
@@ -282,6 +327,7 @@
 			usbphy1: usbphy@40050c00 {
 				compatible = "fsl,vf610-usbphy";
 				reg = <0x40050c00 0x400>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBPHY1>;
 				fsl,anatop = <&anatop>;
 				status = "disabled";
@@ -292,6 +338,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x40066000 0x1000>;
+				interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C0>;
 				clock-names = "ipg";
 				dmas = <&edma0 0 50>,
@@ -311,6 +358,7 @@
 			usbdev0: usb@40034000 {
 				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 				reg = <0x40034000 0x800>;
+				interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBC0>;
 				fsl,usbphy = <&usbphy0>;
 				fsl,usbmisc = <&usbmisc0 0>;
@@ -329,6 +377,7 @@
 			src: src@4006e000 {
 				compatible = "fsl,vf610-src", "syscon";
 				reg = <0x4006e000 0x1000>;
+				interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -345,6 +394,9 @@
 					<0x400a1000 0x1000>,
 					<0x400a2000 0x1000>;
 				dma-channels = <32>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+						<11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
 				clock-names = "dmamux0", "dmamux1";
 				clocks = <&clks VF610_CLK_DMAMUX2>,
 					<&clks VF610_CLK_DMAMUX3>;
@@ -360,6 +412,7 @@
 				snvsrtc: snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
+					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
 				};
@@ -368,6 +421,7 @@
 			uart4: serial@400a9000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400a9000 0x1000>;
+				interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART4>;
 				clock-names = "ipg";
 				status = "disabled";
@@ -376,6 +430,7 @@
 			uart5: serial@400aa000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400aa000 0x1000>;
+				interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART5>;
 				clock-names = "ipg";
 				status = "disabled";
@@ -384,6 +439,7 @@
 			adc1: adc@400bb000 {
 				compatible = "fsl,vf610-adc";
 				reg = <0x400bb000 0x1000>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC1>;
 				clock-names = "adc";
 				status = "disabled";
@@ -392,6 +448,7 @@
 			esdhc1: esdhc@400b2000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b2000 0x1000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_IPG_BUS>,
 					<&clks VF610_CLK_PLATFORM_BUS>,
 					<&clks VF610_CLK_ESDHC1>;
@@ -402,6 +459,7 @@
 			usbh1: usb@400b4000 {
 				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 				reg = <0x400b4000 0x800>;
+				interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_USBC1>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc1 0>;
@@ -420,6 +478,7 @@
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
 				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
 				clocks = <&clks VF610_CLK_FTM2>,
@@ -432,6 +491,7 @@
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
+				interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
@@ -442,6 +502,7 @@
 			fec1: ethernet@400d1000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
+				interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
@@ -452,6 +513,7 @@
 			can1: flexcan@400d4000 {
 				compatible = "fsl,vf610-flexcan";
 				reg = <0x400d4000 0x4000>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_FLEXCAN1>,
 					 <&clks VF610_CLK_FLEXCAN1>;
 				clock-names = "ipg", "per";

arch/arm/configs/imx_v4_v5_defconfig

@@ -24,9 +24,8 @@ CONFIG_ARCH_MXC=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX25_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX25SD=y
-CONFIG_MACH_IMX25_DT=y
+CONFIG_SOC_IMX25=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y

arch/arm/configs/multi_v5_defconfig

@@ -13,7 +13,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
 CONFIG_MACH_NETXBIG=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX25_DT=y
+CONFIG_SOC_IMX25=y
 CONFIG_MACH_IMX27_DT=y
 CONFIG_ARCH_U300=y
 CONFIG_PCI_MVEBU=y

arch/arm/mach-imx/Kconfig

@@ -21,6 +21,7 @@ config MXC_AVIC
 
 config MXC_DEBUG_BOARD
 	bool "Enable MXC debug board(for 3-stack)"
+	depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
 	help
 	  The debug board is an integral part of the MXC 3-stack(PDK)
 	  platforms, it can be attached or removed from the peripheral
@@ -50,6 +51,7 @@ config HAVE_IMX_ANATOP
 
 config HAVE_IMX_GPC
 	bool
+	select PM_GENERIC_DOMAINS if PM
 
 config HAVE_IMX_MMDC
 	bool
@@ -77,13 +79,6 @@ config SOC_IMX21
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
-config SOC_IMX25
-	bool
-	select ARCH_MXC_IOMUX_V3
-	select CPU_ARM926T
-	select MXC_AVIC
-	select PINCTRL_IMX25
-
 config SOC_IMX27
 	bool
 	select CPU_ARM926T
@@ -149,62 +144,6 @@ config MACH_MX21ADS
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select SOC_IMX25
-
-config MACH_EUKREA_CPUIMX25SD
-	bool "Support Eukrea CPUIMX25 Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX25
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25SD
-	default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_IMX25_DT
-	bool "Support i.MX25 platforms from device tree"
-	select SOC_IMX25
-	help
-	  Include support for Freescale i.MX25 based platforms
-	  using the device tree for discovery
-
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
@@ -557,6 +496,20 @@ config MACH_VPR200
 
 endif
 
+if ARCH_MULTI_V5
+
+comment "Device tree only"
+
+config SOC_IMX25
+	bool "i.MX25 support"
+	select ARCH_MXC_IOMUX_V3
+	select CPU_ARM926T
+	select MXC_AVIC
+	select PINCTRL_IMX25
+	help
+	  This enables support for Freescale i.MX25 processor
+endif
+
 if ARCH_MULTI_V7
 
 comment "Device tree only"
@@ -631,12 +584,14 @@ config SOC_IMX6SX
 
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
+	select IRQ_DOMAIN_HIERARCHY
 	select ARM_GIC
 	select PINCTRL_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
+	select SMP_ON_UP if SMP
 
 	help
-	  This enable support for Freescale Vybrid VF610 processor.
+	  This enables support for Freescale Vybrid VF610 processor.
 
 choice
 	prompt "Clocksource for scheduler clock"
@@ -666,7 +621,7 @@ config SOC_LS1021A
 	select ZONE_DMA if ARM_LPAE
 
 	help
-	  This enable support for Freescale LS1021A processor.
+	  This enables support for Freescale LS1021A processor.
 
 endif
 

arch/arm/mach-imx/Makefile

@@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
 
-obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
 
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
@@ -48,12 +48,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 # i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
-# i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
-obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
-
 # i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o

arch/arm/mach-imx/clk-imx25.c

@@ -30,7 +30,6 @@
 #include "clk.h"
 #include "common.h"
 #include "hardware.h"
-#include "mx25.h"
 
 #define CCM_MPCTL	0x00
 #define CCM_UPCTL	0x04
@@ -239,80 +238,6 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
 	return 0;
 }
 
-int __init mx25_clocks_init(void)
-{
-	void __iomem *ccm;
-
-	ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
-
-	__mx25_clocks_init(24000000, ccm);
-
-	clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	/* i.mx25 has the i.mx21 type uart */
-	clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
-	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
-	clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
-	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
-	clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
-	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
-	clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
-	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
-	clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
-	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
-	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
-	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
-	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
-	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
-	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
-	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
-	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
-	/* i.mx25 has the i.mx35 type cspi */
-	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
-	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
-	clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
-	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
-	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
-	clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
-	clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
-	clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
-	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
-	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
-	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
-	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
-	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
-	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
-	clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
-	clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
-	clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
-	clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
-	clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
-	clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
-	clk_register_clkdev(clk[dummy], "audmux", NULL);
-	clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
-	clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
-	/* i.mx25 has the i.mx35 type sdma */
-	clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
-	clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
-	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
-
-	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
-
-	return 0;
-}
-
 static void __init mx25_clocks_init_dt(struct device_node *np)
 {
 	struct device_node *refnp;

arch/arm/mach-imx/clk-imx6q.c

@@ -119,6 +119,7 @@ static unsigned int share_count_asrc;
 static unsigned int share_count_ssi1;
 static unsigned int share_count_ssi2;
 static unsigned int share_count_ssi3;
+static unsigned int share_count_mipi_core_cfg;
 
 static void __init imx6q_clocks_init(struct device_node *ccm_node)
 {
@@ -246,6 +247,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
 	clk[IMX6QDL_CLK_TWD]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
 	clk[IMX6QDL_CLK_GPT_3M]    = imx_clk_fixed_factor("gpt_3m",    "osc",            1, 8);
+	clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
 	if (cpu_is_imx6dl()) {
 		clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
 		clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
@@ -400,7 +402,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
 	clk[IMX6QDL_CLK_GPU3D_CORE]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
 	clk[IMX6QDL_CLK_HDMI_IAHB]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
-	clk[IMX6QDL_CLK_HDMI_ISFR]    = imx_clk_gate2("hdmi_isfr",     "pll3_pfd1_540m",    base + 0x70, 4);
+	clk[IMX6QDL_CLK_HDMI_ISFR]    = imx_clk_gate2("hdmi_isfr",     "video_27m",         base + 0x70, 4);
 	clk[IMX6QDL_CLK_I2C1]         = imx_clk_gate2("i2c1",          "ipg_per",           base + 0x70, 6);
 	clk[IMX6QDL_CLK_I2C2]         = imx_clk_gate2("i2c2",          "ipg_per",           base + 0x70, 8);
 	clk[IMX6QDL_CLK_I2C3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
@@ -415,7 +417,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_LDB_DI0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_podf",      base + 0x74, 12);
 	clk[IMX6QDL_CLK_LDB_DI1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
 	clk[IMX6QDL_CLK_IPU2_DI1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
-	clk[IMX6QDL_CLK_HSI_TX]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
+	clk[IMX6QDL_CLK_HSI_TX]       = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf",       base + 0x74, 16, &share_count_mipi_core_cfg);
+	clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
+	clk[IMX6QDL_CLK_MIPI_IPG]     = imx_clk_gate2_shared("mipi_ipg", "ipg",             base + 0x74, 16, &share_count_mipi_core_cfg);
 	if (cpu_is_imx6dl())
 		/*
 		 * The multiplexer and divider of the imx6q clock gpu2d get

arch/arm/mach-imx/common.h

@@ -23,13 +23,11 @@ struct of_device_id;
 
 void mx1_map_io(void);
 void mx21_map_io(void);
-void mx25_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
 void imx1_init_early(void);
 void imx21_init_early(void);
-void imx25_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
@@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *);
 void tzic_init_irq(void);
 void mx1_init_irq(void);
 void mx21_init_irq(void);
-void mx25_init_irq(void);
 void mx27_init_irq(void);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
 void imx1_soc_init(void);
 void imx21_soc_init(void);
-void imx25_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
@@ -51,7 +47,6 @@ void epit_timer_init(void __iomem *base, int irq);
 void mxc_timer_init(void __iomem *, int);
 int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
-int mx25_clocks_init(void);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);
 int mx35_clocks_init(void);
@@ -71,6 +66,7 @@ unsigned int imx_get_soc_revision(void);
 void imx_init_revision_from_anatop(void);
 struct device *imx_soc_device_init(void);
 void imx6_enable_rbc(bool enable);
+void imx_gpc_check_dt(void);
 void imx_gpc_set_arm_power_in_lpm(bool power_off);
 void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
 void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
@@ -106,7 +102,6 @@ static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 #endif
 void imx_src_init(void);
-void imx_gpc_init(void);
 void imx_gpc_pre_suspend(bool arm_power_off);
 void imx_gpc_post_resume(void);
 void imx_gpc_mask_all(void);

arch/arm/mach-imx/cpu-imx25.c

@@ -11,6 +11,8 @@
  */
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "iim.h"
 #include "hardware.h"
@@ -20,8 +22,15 @@ static int mx25_cpu_rev = -1;
 static int mx25_read_cpu_rev(void)
 {
 	u32 rev;
+	void __iomem *iim_base;
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
+	iim_base = of_iomap(np, 0);
+	BUG_ON(!iim_base);
+	rev = readl(iim_base + MXC_IIMSREV);
+	iounmap(iim_base);
 
-	rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
 		return IMX_CHIP_REVISION_1_0;

arch/arm/mach-imx/devices-imx25.h

@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx25_fec_data;
-#define imx25_add_fec(pdata)	\
-	imx_add_fec(&imx25_fec_data, pdata)
-
-extern const struct imx_flexcan_data imx25_flexcan_data[];
-#define imx25_add_flexcan(id)	\
-	imx_add_flexcan(&imx25_flexcan_data[id])
-#define imx25_add_flexcan0()		imx25_add_flexcan(0)
-#define imx25_add_flexcan1()		imx25_add_flexcan(1)
-
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
-#define imx25_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
-
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
-#define imx25_add_imxdi_rtc()	\
-	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
-
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
-#define imx25_add_imx2_wdt()	\
-	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx25_imx_fb_data;
-#define imx25_add_imx_fb(pdata)	\
-	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
-#define imx25_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
-#define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
-#define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
-#define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
-#define imx25_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
-#define imx25_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
-#define imx25_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
-#define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
-#define imx25_add_imx_uart1(pdata)	imx25_add_imx_uart(1, pdata)
-#define imx25_add_imx_uart2(pdata)	imx25_add_imx_uart(2, pdata)
-#define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
-#define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
-
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
-#define imx25_add_mx2_camera(pdata)	\
-	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
-#define imx25_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
-#define imx25_add_mxc_ehci_hs(pdata)	\
-	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
-#define imx25_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
-#define imx25_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx25_cspi_data[];
-#define imx25_add_spi_imx(id, pdata)	\
-	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
-#define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
-#define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
-#define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)

arch/arm/mach-imx/devices/Kconfig

@@ -21,9 +21,6 @@ config IMX_HAVE_PLATFORM_IMX27_CODA
 config IMX_HAVE_PLATFORM_IMX2_WDT
 	bool
 
-config IMX_HAVE_PLATFORM_IMXDI_RTC
-	bool
-
 config IMX_HAVE_PLATFORM_IMX_FB
 	bool
 

arch/arm/mach-imx/devices/Makefile

@@ -8,7 +8,6 @@ obj-y += platform-gpio-mxc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
 obj-y += platform-imx-dma.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o

arch/arm/mach-imx/devices/platform-fec.c

@@ -19,11 +19,6 @@
 		.irq = soc ## _INT_FEC,					\
 	}
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fec_data imx25_fec_data __initconst =
-	imx_fec_data_entry_single(MX25, "imx25-fec");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fec_data imx27_fec_data __initconst =
 	imx_fec_data_entry_single(MX27, "imx27-fec");

arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c

@@ -18,11 +18,6 @@
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
 	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");

arch/arm/mach-imx/devices/platform-imx-fb.c

@@ -29,11 +29,6 @@ const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);

arch/arm/mach-imx/devices/platform-imx-i2c.c

@@ -31,16 +31,6 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
 	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
-#define imx25_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
-	imx25_imx_i2c_data_entry(0, 1),
-	imx25_imx_i2c_data_entry(1, 2),
-	imx25_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
 #define imx27_imx_i2c_data_entry(_id, _hwid)				\

arch/arm/mach-imx/devices/platform-imx-keypad.c

@@ -21,11 +21,6 @@ const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
 	imx_imx_keypad_data_entry_single(MX21, SZ_16);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX25, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
 	imx_imx_keypad_data_entry_single(MX27, SZ_16);

arch/arm/mach-imx/devices/platform-imx-ssi.c

@@ -30,15 +30,6 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
-#define imx25_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
-	imx25_imx_ssi_data_entry(0, 1),
-	imx25_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
 #define imx27_imx_ssi_data_entry(_id, _hwid)				\

arch/arm/mach-imx/devices/platform-imx-uart.c

@@ -47,18 +47,6 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
 };
 #endif
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
-#define imx25_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_imx_uart_data_entry(0, 1),
-	imx25_imx_uart_data_entry(1, 2),
-	imx25_imx_uart_data_entry(2, 3),
-	imx25_imx_uart_data_entry(3, 4),
-	imx25_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
 #define imx27_imx_uart_data_entry(_id, _hwid)				\

arch/arm/mach-imx/devices/platform-imx2-wdt.c

@@ -25,11 +25,6 @@ const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
 	imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
-	imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
 	imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);

arch/arm/mach-imx/devices/platform-imxdi_rtc.c

@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imxdi_rtc_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _DRYICE_BASE_ADDR,			\
-		.irq = soc ## _INT_DRYICE,				\
-	}
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
-	imx_imxdi_rtc_data_entry_single(MX25);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-struct platform_device *__init imx_add_imxdi_rtc(
-		const struct imx_imxdi_rtc_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imxdi_rtc", 0,
-			res, ARRAY_SIZE(res), NULL, 0);
-}

arch/arm/mach-imx/devices/platform-mx2-camera.c

@@ -27,11 +27,6 @@
 		.irqemmaprp = soc ## _INT_EMMAPRP,			\
 	}
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
-	imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
 	imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");

arch/arm/mach-imx/devices/platform-mxc-ehci.c

@@ -18,13 +18,6 @@
 		.irq = soc ## _INT_USB_ ## hs,				\
 	}
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
-const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX25, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
 	imx_mxc_ehci_data_entry_single(MX27, 0, OTG);

arch/arm/mach-imx/devices/platform-mxc_nand.c

@@ -34,11 +34,6 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
-	imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);

arch/arm/mach-imx/devices/platform-spi_imx.c

@@ -39,17 +39,6 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 };
 #endif
 
-#ifdef CONFIG_SOC_IMX25
-/* i.mx25 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
-#define imx25_cspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
-	imx25_cspi_data_entry(0, 1),
-	imx25_cspi_data_entry(1, 2),
-	imx25_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX27
 const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
 #define imx27_cspi_data_entry(_id, _hwid)				\

arch/arm/mach-imx/ehci-imx25.c

@@ -1,99 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX25_OTG_SIC_SHIFT	29
-#define MX25_OTG_SIC_MASK	(0x3 << MX25_OTG_SIC_SHIFT)
-#define MX25_OTG_PM_BIT		(1 << 24)
-#define MX25_OTG_PP_BIT		(1 << 11)
-#define MX25_OTG_OCPOL_BIT	(1 << 3)
-
-#define MX25_H1_SIC_SHIFT	21
-#define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
-#define MX25_H1_PP_BIT		(1 << 18)
-#define MX25_H1_PM_BIT		(1 << 16)
-#define MX25_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX25_H1_TLL_BIT		(1 << 5)
-#define MX25_H1_USBTE_BIT	(1 << 4)
-#define MX25_H1_OCPOL_BIT	(1 << 2)
-
-int mx25_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
-			MX25_OTG_OCPOL_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_OTG_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX25_OTG_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX25_OTG_OCPOL_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
-			MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
-			MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_H1_PM_BIT;
-
-		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-			v |= MX25_H1_PP_BIT;
-
-		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
-			v |= MX25_H1_OCPOL_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX25_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX25_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX25_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX25_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
-

arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c

@@ -1,310 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-	/* LCD_PWR */
-	MX25_PAD_PWM__GPIO_1_26,
-	/* LED */
-	MX25_PAD_POWER_FAIL__GPIO_3_19,
-	/* SWITCH */
-	MX25_PAD_VSTBY_ACK__GPIO_3_18,
-	/* UART2 */
-	MX25_PAD_UART2_RTS__UART2_RTS,
-	MX25_PAD_UART2_CTS__UART2_CTS,
-	MX25_PAD_UART2_TXD__UART2_TXD,
-	MX25_PAD_UART2_RXD__UART2_RXD,
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	MX25_PAD_DE_B__GPIO_2_20,
-	/* I2S */
-	MX25_PAD_KPP_COL3__AUD5_TXFS,
-	MX25_PAD_KPP_COL2__AUD5_TXC,
-	MX25_PAD_KPP_COL1__AUD5_RXD,
-	MX25_PAD_KPP_COL0__AUD5_TXD,
-	/* CAN */
-	MX25_PAD_GPIO_D__CAN2_RX,
-	MX25_PAD_GPIO_C__CAN2_TX,
-	/* SPI1 */
-	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
-	MX25_PAD_CSPI1_MISO__CSPI1_MISO,
-	MX25_PAD_CSPI1_SS0__GPIO_1_16,
-	MX25_PAD_CSPI1_SS1__GPIO_1_17,
-	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	MX25_PAD_CSPI1_RDY__GPIO_2_22,
-};
-
-#define GPIO_LED1		IMX_GPIO_NR(3, 19)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 18)
-#define GPIO_SD1CD		IMX_GPIO_NR(2, 20)
-#define GPIO_LCDPWR		IMX_GPIO_NR(1, 26)
-#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 16)
-#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 17)
-#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(2, 22)
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
-	{
-		.mode	= {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= KHZ2PICOS(6500),
-			.left_margin	= 30,
-			.right_margin	= 38,
-			.upper_margin	= 20,
-			.lower_margin	= 3,
-			.hsync_len	= 15,
-			.vsync_len	= 4,
-		},
-		.bpp	= 16,
-		.pcr	= 0xCAD08B80,
-	}, {
-		.mode = {
-			.name		= "DVI-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 32000,
-			.hsync_len	= 7,
-			.left_margin	= 100,
-			.right_margin	= 100,
-			.vsync_len	= 7,
-			.upper_margin	= 7,
-			.lower_margin	= 100,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-SVGA",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 600,
-			.pixclock	= 25000,
-			.hsync_len	= 7,
-			.left_margin	= 75,
-			.right_margin	= 75,
-			.vsync_len	= 7,
-			.upper_margin	= 7,
-			.lower_margin	= 75,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
-	.mode		= eukrea_mximxsd_modes,
-	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDPWR, 1);
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
-};
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_gpio = GPIO_SD1CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.mode = SPI_MODE_0,
-	},
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
-	.chipselect     = eukrea_mbimxsd25_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd25_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx25_add_imx_uart1(&uart_pdata);
-	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
-	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
-	imx25_add_flexcan1();
-	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDPWR, "LCDPWR");
-	gpio_direction_output(GPIO_LCDPWR, 1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
-	gpio_direction_input(GPIO_SPI1_IRQ);
-	gpio_free(GPIO_SPI1_IRQ);
-	imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
-	spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
-		ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}

arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

@@ -100,7 +100,7 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
 	/* LCD */
 	MX35_PAD_LD0__IPU_DISPB_DAT_0,
 	MX35_PAD_LD1__IPU_DISPB_DAT_1,

arch/arm/mach-imx/gpc.c

@@ -10,15 +10,25 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regulator/consumer.h>
 #include <linux/irqchip/arm-gic.h>
 #include "common.h"
+#include "hardware.h"
 
+#define GPC_CNTR		0x000
 #define GPC_IMR1		0x008
+#define GPC_PGC_GPU_PDN		0x260
+#define GPC_PGC_GPU_PUPSCR	0x264
+#define GPC_PGC_GPU_PDNSCR	0x268
 #define GPC_PGC_CPU_PDN		0x2a0
 #define GPC_PGC_CPU_PUPSCR	0x2a4
 #define GPC_PGC_CPU_PDNSCR	0x2a8
@@ -26,6 +36,19 @@
 #define GPC_PGC_SW_SHIFT	0x0
 
 #define IMR_NUM			4
+#define GPC_MAX_IRQS		(IMR_NUM * 32)
+
+#define GPU_VPU_PUP_REQ		BIT(1)
+#define GPU_VPU_PDN_REQ		BIT(0)
+
+#define GPC_CLK_MAX		6
+
+struct pu_domain {
+	struct generic_pm_domain base;
+	struct regulator *reg;
+	struct clk *clk[GPC_CLK_MAX];
+	int num_clks;
+};
 
 static void __iomem *gpc_base;
 static u32 gpc_wake_irqs[IMR_NUM];
@@ -77,17 +100,17 @@ void imx_gpc_post_resume(void)
 
 static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
 {
-	unsigned int idx = d->hwirq / 32 - 1;
+	unsigned int idx = d->hwirq / 32;
 	u32 mask;
 
-	/* Sanity check for SPI irq */
-	if (d->hwirq < 32)
-		return -EINVAL;
-
 	mask = 1 << d->hwirq % 32;
 	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
 				  gpc_wake_irqs[idx] & ~mask;
 
+	/*
+	 * Do *not* call into the parent, as the GIC doesn't have any
+	 * wake-up facility...
+	 */
 	return 0;
 }
 
@@ -117,7 +140,7 @@ void imx_gpc_hwirq_unmask(unsigned int hwirq)
 	void __iomem *reg;
 	u32 val;
 
-	reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+	reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4;
 	val = readl_relaxed(reg);
 	val &= ~(1 << hwirq % 32);
 	writel_relaxed(val, reg);
@@ -128,7 +151,7 @@ void imx_gpc_hwirq_mask(unsigned int hwirq)
 	void __iomem *reg;
 	u32 val;
 
-	reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+	reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4;
 	val = readl_relaxed(reg);
 	val |= 1 << (hwirq % 32);
 	writel_relaxed(val, reg);
@@ -136,37 +159,319 @@ void imx_gpc_hwirq_mask(unsigned int hwirq)
 
 static void imx_gpc_irq_unmask(struct irq_data *d)
 {
-	/* Sanity check for SPI irq */
-	if (d->hwirq < 32)
-		return;
-
 	imx_gpc_hwirq_unmask(d->hwirq);
+	irq_chip_unmask_parent(d);
 }
 
 static void imx_gpc_irq_mask(struct irq_data *d)
 {
-	/* Sanity check for SPI irq */
-	if (d->hwirq < 32)
-		return;
-
 	imx_gpc_hwirq_mask(d->hwirq);
+	irq_chip_mask_parent(d);
 }
 
-void __init imx_gpc_init(void)
+static struct irq_chip imx_gpc_chip = {
+	.name			= "GPC",
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_mask		= imx_gpc_irq_mask,
+	.irq_unmask		= imx_gpc_irq_unmask,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_wake		= imx_gpc_irq_set_wake,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+#endif
+};
+
+static int imx_gpc_domain_xlate(struct irq_domain *domain,
+				struct device_node *controller,
+				const u32 *intspec,
+				unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
 {
-	struct device_node *np;
+	if (domain->of_node != controller)
+		return -EINVAL;	/* Shouldn't happen, really... */
+	if (intsize != 3)
+		return -EINVAL;	/* Not GIC compliant */
+	if (intspec[0] != 0)
+		return -EINVAL;	/* No PPI should point to this domain */
+
+	*out_hwirq = intspec[1];
+	*out_type = intspec[2];
+	return 0;
+}
+
+static int imx_gpc_domain_alloc(struct irq_domain *domain,
+				  unsigned int irq,
+				  unsigned int nr_irqs, void *data)
+{
+	struct of_phandle_args *args = data;
+	struct of_phandle_args parent_args;
+	irq_hw_number_t hwirq;
 	int i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
-	gpc_base = of_iomap(np, 0);
-	WARN_ON(!gpc_base);
+	if (args->args_count != 3)
+		return -EINVAL;	/* Not GIC compliant */
+	if (args->args[0] != 0)
+		return -EINVAL;	/* No PPI should point to this domain */
+
+	hwirq = args->args[1];
+	if (hwirq >= GPC_MAX_IRQS)
+		return -EINVAL;	/* Can't deal with this */
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
+					      &imx_gpc_chip, NULL);
+
+	parent_args = *args;
+	parent_args.np = domain->parent->of_node;
+	return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops imx_gpc_domain_ops = {
+	.xlate	= imx_gpc_domain_xlate,
+	.alloc	= imx_gpc_domain_alloc,
+	.free	= irq_domain_free_irqs_common,
+};
+
+static int __init imx_gpc_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	struct irq_domain *parent_domain, *domain;
+	int i;
+
+	if (!parent) {
+		pr_err("%s: no parent, giving up\n", node->full_name);
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent);
+	if (!parent_domain) {
+		pr_err("%s: unable to obtain parent domain\n", node->full_name);
+		return -ENXIO;
+	}
+
+	gpc_base = of_iomap(node, 0);
+	if (WARN_ON(!gpc_base))
+	        return -ENOMEM;
+
+	domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
+					  node, &imx_gpc_domain_ops,
+					  NULL);
+	if (!domain) {
+		iounmap(gpc_base);
+		return -ENOMEM;
+	}
 
 	/* Initially mask all interrupts */
 	for (i = 0; i < IMR_NUM; i++)
 		writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
 
-	/* Register GPC as the secondary interrupt controller behind GIC */
-	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
-	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
-	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+	return 0;
+}
+
+/*
+ * We cannot use the IRQCHIP_DECLARE macro that lives in
+ * drivers/irqchip, so we're forced to roll our own. Not very nice.
+ */
+OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+
+void __init imx_gpc_check_dt(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+	if (WARN_ON(!np ||
+		    !of_find_property(np, "interrupt-controller", NULL)))
+		pr_warn("Outdated DT detected, system is about to crash!!!\n");
+}
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+
+static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+	int iso, iso2sw;
+	u32 val;
+
+	/* Read ISO and ISO2SW power down delays */
+	val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
+	iso = val & 0x3f;
+	iso2sw = (val >> 8) & 0x3f;
+
+	/* Gate off PU domain when GPU/VPU when powered down */
+	writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+	/* Request GPC to power down GPU/VPU */
+	val = readl_relaxed(gpc_base + GPC_CNTR);
+	val |= GPU_VPU_PDN_REQ;
+	writel_relaxed(val, gpc_base + GPC_CNTR);
+
+	/* Wait ISO + ISO2SW IPG clock cycles */
+	ndelay((iso + iso2sw) * 1000 / 66);
+}
+
+static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+	struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+
+	_imx6q_pm_pu_power_off(genpd);
+
+	if (pu->reg)
+		regulator_disable(pu->reg);
+
+	return 0;
+}
+
+static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
+{
+	struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+	int i, ret, sw, sw2iso;
+	u32 val;
+
+	if (pu->reg)
+		ret = regulator_enable(pu->reg);
+	if (pu->reg && ret) {
+		pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/* Enable reset clocks for all devices in the PU domain */
+	for (i = 0; i < pu->num_clks; i++)
+		clk_prepare_enable(pu->clk[i]);
+
+	/* Gate off PU domain when GPU/VPU when powered down */
+	writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+	/* Read ISO and ISO2SW power down delays */
+	val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
+	sw = val & 0x3f;
+	sw2iso = (val >> 8) & 0x3f;
+
+	/* Request GPC to power up GPU/VPU */
+	val = readl_relaxed(gpc_base + GPC_CNTR);
+	val |= GPU_VPU_PUP_REQ;
+	writel_relaxed(val, gpc_base + GPC_CNTR);
+
+	/* Wait ISO + ISO2SW IPG clock cycles */
+	ndelay((sw + sw2iso) * 1000 / 66);
+
+	/* Disable reset clocks for all devices in the PU domain */
+	for (i = 0; i < pu->num_clks; i++)
+		clk_disable_unprepare(pu->clk[i]);
+
+	return 0;
+}
+
+static struct generic_pm_domain imx6q_arm_domain = {
+	.name = "ARM",
+};
+
+static struct pu_domain imx6q_pu_domain = {
+	.base = {
+		.name = "PU",
+		.power_off = imx6q_pm_pu_power_off,
+		.power_on = imx6q_pm_pu_power_on,
+		.power_off_latency_ns = 25000,
+		.power_on_latency_ns = 2000000,
+	},
+};
+
+static struct generic_pm_domain imx6sl_display_domain = {
+	.name = "DISPLAY",
+};
+
+static struct generic_pm_domain *imx_gpc_domains[] = {
+	&imx6q_arm_domain,
+	&imx6q_pu_domain.base,
+	&imx6sl_display_domain,
+};
+
+static struct genpd_onecell_data imx_gpc_onecell_data = {
+	.domains = imx_gpc_domains,
+	.num_domains = ARRAY_SIZE(imx_gpc_domains),
+};
+
+static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
+{
+	struct clk *clk;
+	bool is_off;
+	int i;
+
+	imx6q_pu_domain.reg = pu_reg;
+
+	for (i = 0; ; i++) {
+		clk = of_clk_get(dev->of_node, i);
+		if (IS_ERR(clk))
+			break;
+		if (i >= GPC_CLK_MAX) {
+			dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
+			goto clk_err;
+		}
+		imx6q_pu_domain.clk[i] = clk;
+	}
+	imx6q_pu_domain.num_clks = i;
+
+	is_off = IS_ENABLED(CONFIG_PM);
+	if (is_off) {
+		_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
+	} else {
+		/*
+		 * Enable power if compiled without CONFIG_PM in case the
+		 * bootloader disabled it.
+		 */
+		imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
+	}
+
+	pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+	return of_genpd_add_provider_onecell(dev->of_node,
+					     &imx_gpc_onecell_data);
+
+clk_err:
+	while (i--)
+		clk_put(imx6q_pu_domain.clk[i]);
+	return -EINVAL;
+}
+
+#else
+static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
+{
+	return 0;
+}
+#endif /* CONFIG_PM_GENERIC_DOMAINS */
+
+static int imx_gpc_probe(struct platform_device *pdev)
+{
+	struct regulator *pu_reg;
+	int ret;
+
+	pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
+	if (PTR_ERR(pu_reg) == -ENODEV)
+		pu_reg = NULL;
+	if (IS_ERR(pu_reg)) {
+		ret = PTR_ERR(pu_reg);
+		dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
+		return ret;
+	}
+
+	return imx_gpc_genpd_init(&pdev->dev, pu_reg);
+}
+
+static const struct of_device_id imx_gpc_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-gpc" },
+	{ .compatible = "fsl,imx6sl-gpc" },
+	{ }
+};
+
+static struct platform_driver imx_gpc_driver = {
+	.driver = {
+		.name = "imx-gpc",
+		.owner = THIS_MODULE,
+		.of_match_table = imx_gpc_dt_ids,
+	},
+	.probe = imx_gpc_probe,
+};
+
+static int __init imx_pgc_init(void)
+{
+	return platform_driver_register(&imx_gpc_driver);
 }
+subsys_initcall(imx_pgc_init);

arch/arm/mach-imx/hardware.h

@@ -112,7 +112,6 @@
 #include "mx21.h"
 #include "mx27.h"
 #include "mx1.h"
-#include "mx25.h"
 
 #define imx_map_entry(soc, name, _type)	{				\
 	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\

arch/arm/mach-imx/iomux-mx25.h

@@ -1,524 +0,0 @@
-/*
- * arch/arm/plat-mxc/include/mach/iomux-mx25.h
- *
- * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
- *
- * based on arch/arm/mach-mx25/mx25_pins.h
- *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * and
- * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- *    Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_IOMUX_MX25_H__
-#define __MACH_IOMUX_MX25_H__
-
-#include "iomux-v3.h"
-
-/*
- * IOMUX/PAD Bit field definitions
- */
-
-#define MX25_PAD_A10__A10		IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A10__GPIO_4_0		IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A13__A13		IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A13__GPIO_4_1		IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A14__A14		IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A14__GPIO_2_0		IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A15__A15		IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A15__GPIO_2_1		IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A16__A16		IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A16__GPIO_2_2		IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A17__A17		IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A17__GPIO_2_3		IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A23__A23		IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A23__GPIO_2_9		IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__GPIO_2_12		IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB1__EB1		IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__AUD4_RXD		IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__GPIO_2_13		IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE__OE			IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__AUD4_TXC		IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__GPIO_2_14		IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS0__CS0		IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__NF_CE3		IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__NF_CE1		IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__NF_CE2		IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__UART5_TXD_MUX	IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__GPIO_3_23		IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LBA__LBA		IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__UART5_RXD_MUX	IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__GPIO_3_24		IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BCLK__BCLK		IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BCLK__GPIO_4_4		IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RW__RW			IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__AUD4_TXFS		IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__GPIO_3_25		IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWE_B__NFWE_B		IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWE_B__GPIO_3_26	IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRE_B__NFRE_B		IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFRE_B__GPIO_3_27	IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFALE__NFALE		IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFALE__GPIO_3_28	IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFCLE__NFCLE		IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFCLE__GPIO_3_29	IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWP_B__NFWP_B		IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWP_B__GPIO_3_30	IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRB__NFRB		IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_NFRB__GPIO_3_31	IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D15__D15		IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D15__LD16		IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D15__GPIO_4_5		IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D14__D14		IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D14__LD17		IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D14__GPIO_4_6		IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D13__D13		IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D13__LD18		IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D13__GPIO_4_7		IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D12__D12		IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D12__GPIO_4_8		IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D11__D11		IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D11__GPIO_4_9		IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D10__D10		IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__GPIO_4_10		IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__USBOTG_OC		IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D9__D9			IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__GPIO_4_11		IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__USBH2_PWR		IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_D8__D8			IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__GPIO_4_12		IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__USBH2_OC		IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D7__D7			IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D7__GPIO_4_13		IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D6__D6			IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D6__GPIO_4_14		IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D5__D5			IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D5__GPIO_4_15		IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D4__D4			IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D4__GPIO_4_16		IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D3__D3			IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D3__GPIO_4_17		IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D2__D2			IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D2__GPIO_4_18		IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D1__D1			IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D1__GPIO_4_19		IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D0__D0			IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D0__GPIO_4_20		IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD0__LD0		IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD0__CSI_D0		IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD0__GPIO_2_15		IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD1__LD1		IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD1__CSI_D1		IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD1__GPIO_2_16		IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD2__LD2		IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD2__GPIO_2_17		IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD3__LD3		IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD3__GPIO_2_18		IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD4__LD4		IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD4__GPIO_2_19		IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD5__LD5		IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD5__GPIO_1_19		IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD6__LD6		IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD6__GPIO_1_20		IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD7__LD7		IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSYNC__VSYNC		IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSYNC__GPIO_1_23	IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LSCLK__LSCLK		IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LSCLK__GPIO_1_24	IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE_ACD__OE_ACD		IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__PWM4_PWMO	IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__USBH2_OC		IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__CSPI3_MOSI	IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__CSPI3_MISO	IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__CSPI3_SCLK	IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__CSPI3_RDY	IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D7__CSI_D7		IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D7__GPIO_1_6	IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D8__CSI_D8		IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D8__GPIO_1_7	IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D9__CSI_D9		IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D9__GPIO_4_21	IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK	IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_MCLK__GPIO_1_8	IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC	IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9	IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC	IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10	IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK	IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11	IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK	IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_CLK__GPIO_1_12	IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT	IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_DAT__GPIO_1_13	IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI	IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14	IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO	IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15	IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0	IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16	IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1	IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17	IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK	IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18	IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY	IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22	IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_UART1_RXD__GPIO_4_22	IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART1_TXD__GPIO_4_23	IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_RTS__CSI_D0	IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_RTS__GPIO_4_24	IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_CTS__CSI_D1	IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_CTS__GPIO_4_25	IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RXD__GPIO_4_26	IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA0__GPIO_2_25	IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA1__AUD7_RXD	IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define KPP_CTL_ROW	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define KPP_CTL_COL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL0__AUD5_TXD	IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL1__AUD5_RXD	IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL2__UART4_RTS	IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL2__AUD5_TXC	IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL3__UART4_CTS	IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL3__AUD5_TXFS	IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13	IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RTCK__RTCK		IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__OWIRE		IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__GPIO_3_14	IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_DE_B__DE_B		IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_DE_B__GPIO_2_20	IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_TDO__TDO		IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_A__GPIO_A		IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_A__CAN1_TX	IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_E__LD16		IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__LD17		IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__AUD7_TXC	IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK	IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15	IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16	IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ	IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS	IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17	IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK	IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18	IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL	IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__AUD7_RXD	IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__GPIO_3_19	IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CLKO__CLKO		IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CLKO__GPIO_2_21	IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30	IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31	IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CTL_GRP_DVS_MISC	IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_FEC	IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_JTAG	IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_NFC	IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSI	IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_WEIM	IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_DDR	IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CRM	IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_KPP	IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_SDHC1	IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_LCD	IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_UART	IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_NFC	IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CSI	IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSPI1	IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DDRTYPE	IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX25_H__ */

arch/arm/mach-imx/iomux-mx3.h

@@ -114,7 +114,7 @@ enum iomux_gp_func {
  */
 int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
 /*
- * setups mutliple pins
+ * setups multiple pins
  * convenient way to call the above function with tables
  */
 int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,

arch/arm/mach-imx/iomux-v3.c

@@ -56,9 +56,10 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 	return 0;
 }
 
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+		unsigned count)
 {
-	iomux_v3_cfg_t *p = pad_list;
+	const iomux_v3_cfg_t *p = pad_list;
 	int i;
 	int ret;
 

arch/arm/mach-imx/iomux-v3.h

@@ -128,10 +128,11 @@ typedef u64 iomux_v3_cfg_t;
 int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 
 /*
- * setups mutliple pads
+ * setups multiple pads
  * convenient way to call the above function with tables
  */
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+		unsigned count);
 
 /*
  * Initialise the iomux controller

arch/arm/mach-imx/mach-cpuimx35.c

@@ -75,7 +75,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	},
 };
 
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
+static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -1,172 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
-	/* FEC - RMII */
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	/* I2C1 */
-	MX25_PAD_I2C1_CLK__I2C1_CLK,
-	MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-	.phy	= PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
-	.init	= eukrea_cpuimx25_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= eukrea_cpuimx25_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-	.workaround     = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
-	imx25_soc_init();
-
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
-			ARRAY_SIZE(eukrea_cpuimx25_pads)))
-		printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
-	imx25_add_imx_uart0(&uart_pdata);
-	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
-	imx25_add_imxdi_rtc();
-	imx25_add_fec(&mx25_fec_pdata);
-	imx25_add_imx2_wdt();
-
-	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
-	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
-	if (otg_mode_host)
-		imx25_add_mxc_ehci_otg(&otg_pdata);
-	else
-		imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
-	eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
-	/* Maintainer: Eukrea Electromatique */
-	.atag_offset = 0x100,
-	.map_io = mx25_map_io,
-	.init_early = imx25_init_early,
-	.init_irq = mx25_init_irq,
-	.init_time = eukrea_cpuimx25_timer_init,
-	.init_machine = eukrea_cpuimx25_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/imx25-dt.c → arch/arm/mach-imx/mach-imx25.c

@@ -10,12 +10,29 @@
  */
 
 #include <linux/irq.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include "common.h"
-#include "mx25.h"
+#include "hardware.h"
+
+static void __init imx25_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+}
+
+static void __init mx25_init_irq(void)
+{
+	struct device_node *np;
+	void __iomem *avic_base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+	avic_base = of_iomap(np, 0);
+	BUG_ON(!avic_base);
+	mxc_init_irq(avic_base);
+}
 
 static const char * const imx25_dt_board_compat[] __initconst = {
 	"fsl,imx25",
@@ -23,7 +40,6 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
-	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,
 	.init_irq	= mx25_init_irq,
 	.dt_compat	= imx25_dt_board_compat,

arch/arm/mach-imx/mach-imx6q.c

@@ -387,10 +387,10 @@ static void __init imx6q_map_io(void)
 
 static void __init imx6q_init_irq(void)
 {
+	imx_gpc_check_dt();
 	imx_init_revision_from_anatop();
 	imx_init_l2cache();
 	imx_src_init();
-	imx_gpc_init();
 	irqchip_init();
 }
 

arch/arm/mach-imx/mach-imx6sl.c

@@ -61,10 +61,10 @@ static void __init imx6sl_init_machine(void)
 
 static void __init imx6sl_init_irq(void)
 {
+	imx_gpc_check_dt();
 	imx_init_revision_from_anatop();
 	imx_init_l2cache();
 	imx_src_init();
-	imx_gpc_init();
 	irqchip_init();
 }
 

arch/arm/mach-imx/mach-imx6sx.c

@@ -81,10 +81,10 @@ static void __init imx6sx_init_machine(void)
 
 static void __init imx6sx_init_irq(void)
 {
+	imx_gpc_check_dt();
 	imx_init_revision_from_anatop();
 	imx_init_l2cache();
 	imx_src_init();
-	imx_gpc_init();
 	irqchip_init();
 }
 

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -1,270 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-/*
- * This machine is known as:
- *  - i.MX25 3-Stack Development System
- *  - i.MX25 Platform Development Kit (i.MX25 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-#define MX25PDK_CAN_PWDN	IMX_GPIO_NR(4, 6)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t mx25pdk_pads[] = {
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
-	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-
-	/* Keypad */
-	MX25_PAD_KPP_ROW0__KPP_ROW0,
-	MX25_PAD_KPP_ROW1__KPP_ROW1,
-	MX25_PAD_KPP_ROW2__KPP_ROW2,
-	MX25_PAD_KPP_ROW3__KPP_ROW3,
-	MX25_PAD_KPP_COL0__KPP_COL0,
-	MX25_PAD_KPP_COL1__KPP_COL1,
-	MX25_PAD_KPP_COL2__KPP_COL2,
-	MX25_PAD_KPP_COL3__KPP_COL3,
-
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
-	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
-
-	/* I2C1 */
-	MX25_PAD_I2C1_CLK__I2C1_CLK,
-	MX25_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* CAN1 */
-	MX25_PAD_GPIO_A__CAN1_TX,
-	MX25_PAD_GPIO_B__CAN1_RX,
-	MX25_PAD_D14__GPIO_4_6,	/* CAN_PWDN */
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-	.phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO		IMX_GPIO_NR(2, 3)
-#define FEC_RESET_B_GPIO	IMX_GPIO_NR(4, 8)
-
-static void __init mx25pdk_fec_reset(void)
-{
-	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
-	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
-	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
-	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
-	udelay(2);
-
-	/* turn on PHY power and lift reset */
-	gpio_set_value(FEC_ENABLE_GPIO, 1);
-	gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static const struct mxc_nand_platform_data
-mx25pdk_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
-	{
-		.mode	= {
-			.name		= "CRT-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 39683,
-			.left_margin	= 45,
-			.right_margin	= 114,
-			.upper_margin	= 33,
-			.lower_margin	= 11,
-			.hsync_len	= 1,
-			.vsync_len	= 1,
-		},
-		.bpp	= 16,
-		.pcr	= 0xFA208B80,
-	},
-};
-
-static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
-	.mode		= mx25pdk_modes,
-	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static const uint32_t mx25pdk_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_VOLUMEDOWN),
-	KEY(0, 3, KEY_HOME),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_ENTER),
-	KEY(1, 3, KEY_VOLUMEUP),
-	KEY(2, 0, KEY_F6),
-	KEY(2, 1, KEY_F8),
-	KEY(2, 2, KEY_F9),
-	KEY(2, 3, KEY_F10),
-	KEY(3, 0, KEY_F1),
-	KEY(3, 1, KEY_F2),
-	KEY(3, 2, KEY_F3),
-	KEY(3, 3, KEY_POWER),
-};
-
-static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
-	.keymap		= mx25pdk_keymap,
-	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
-};
-
-static int mx25pdk_usbh2_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= mx25pdk_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
-
-static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
-	.wp_gpio = SD1_GPIO_WP,
-	.cd_gpio = SD1_GPIO_CD,
-	.wp_type = ESDHC_WP_GPIO,
-	.cd_type = ESDHC_CD_GPIO,
-};
-
-static void __init mx25pdk_init(void)
-{
-	imx25_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
-			ARRAY_SIZE(mx25pdk_pads));
-
-	imx25_add_imx_uart0(&uart_pdata);
-	imx25_add_fsl_usb2_udc(&otg_device_pdata);
-	imx25_add_mxc_ehci_hs(&usbh2_pdata);
-	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
-	imx25_add_imxdi_rtc();
-	imx25_add_imx_fb(&mx25pdk_fb_pdata);
-	imx25_add_imx2_wdt();
-
-	mx25pdk_fec_reset();
-	imx25_add_fec(&mx25_fec_pdata);
-	imx25_add_imx_keypad(&mx25pdk_keymap_data);
-
-	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
-	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
-
-	gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
-	imx25_add_flexcan0();
-}
-
-static void __init mx25pdk_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx25_map_io,
-	.init_early = imx25_init_early,
-	.init_irq = mx25_init_irq,
-	.init_time	= mx25pdk_timer_init,
-	.init_machine = mx25pdk_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -166,7 +166,7 @@ static struct platform_device *devices[] __initdata = {
 	&mx35pdk_flash,
 };
 
-static iomux_v3_cfg_t mx35pdk_pads[] = {
+static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,

arch/arm/mach-imx/mach-pcm043.c

@@ -129,7 +129,7 @@ static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
 };
 
-static iomux_v3_cfg_t pcm043_pads[] = {
+static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,

arch/arm/mach-imx/mach-vpr200.c

@@ -161,7 +161,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
 	}
 };
 
-static iomux_v3_cfg_t vpr200_pads[] = {
+static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
 	/* UART1 */
 	MX35_PAD_TXD1__UART1_TXD_MUX,
 	MX35_PAD_RXD1__UART1_RXD_MUX,

arch/arm/mach-imx/mm-imx25.c

@@ -1,89 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-#include "mx25.h"
-
-/*
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX25 boards.
- */
-static struct map_desc mx25_io_desc[] __initdata = {
-	imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx25_map_io(void)
-{
-	iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
-}
-
-void __init imx25_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX25);
-	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
-}
-
-void __init mx25_init_irq(void)
-{
-	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-}
-
-static struct sdma_platform_data imx25_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx25.bin",
-};
-
-static const struct resource imx25_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx25_soc_init(void)
-{
-	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
-	mxc_device_init();
-
-	/* i.mx25 has the i.mx35 type gpio */
-	mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
-	mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
-	mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
-	mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
-
-	pinctrl_provide_dummies();
-	/* i.mx25 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
-	/* i.mx25 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
-					ARRAY_SIZE(imx25_audmux_res));
-}

arch/arm/mach-imx/mx25.h

@@ -1,117 +0,0 @@
-#ifndef __MACH_MX25_H__
-#define __MACH_MX25_H__
-
-#define MX25_AIPS1_BASE_ADDR		0x43f00000
-#define MX25_AIPS1_SIZE			SZ_1M
-#define MX25_AIPS2_BASE_ADDR		0x53f00000
-#define MX25_AIPS2_SIZE			SZ_1M
-#define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_SIZE			SZ_1M
-
-#define MX25_I2C1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x80000)
-#define MX25_I2C3_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x84000)
-#define MX25_CAN1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x88000)
-#define MX25_CAN2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x8c000)
-#define MX25_I2C2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x98000)
-#define MX25_CSPI1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xa4000)
-#define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
-
-#define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
-#define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
-#define MX25_GPIO4_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x9c000)
-#define MX25_PWM2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa0000)
-#define MX25_GPIO3_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa4000)
-#define MX25_PWM3_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa8000)
-#define MX25_PWM4_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xc8000)
-#define MX25_GPIO1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xcc000)
-#define MX25_GPIO2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xd0000)
-#define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
-#define MX25_PWM1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xe0000)
-
-#define MX25_UART1_BASE_ADDR		0x43f90000
-#define MX25_UART2_BASE_ADDR		0x43f94000
-#define MX25_AUDMUX_BASE_ADDR		0x43fb0000
-#define MX25_UART3_BASE_ADDR		0x5000c000
-#define MX25_UART4_BASE_ADDR		0x50008000
-#define MX25_UART5_BASE_ADDR		0x5002c000
-
-#define MX25_CSPI3_BASE_ADDR		0x50004000
-#define MX25_CSPI2_BASE_ADDR		0x50010000
-#define MX25_FEC_BASE_ADDR		0x50038000
-#define MX25_SSI2_BASE_ADDR		0x50014000
-#define MX25_SSI1_BASE_ADDR		0x50034000
-#define MX25_NFC_BASE_ADDR		0xbb000000
-#define MX25_IIM_BASE_ADDR		0x53ff0000
-#define MX25_DRYICE_BASE_ADDR		0x53ffc000
-#define MX25_ESDHC1_BASE_ADDR		0x53fb4000
-#define MX25_ESDHC2_BASE_ADDR		0x53fb8000
-#define MX25_LCDC_BASE_ADDR		0x53fbc000
-#define MX25_KPP_BASE_ADDR		0x43fa8000
-#define MX25_SDMA_BASE_ADDR		0x53fd4000
-#define MX25_USB_BASE_ADDR		0x53ff4000
-#define MX25_USB_OTG_BASE_ADDR			(MX25_USB_BASE_ADDR + 0x0000)
-/*
- * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
- * for the host controller.  Early documentation drafts specified 0x400 and
- * Freescale internal sources confirm only the latter value to work.
- */
-#define MX25_USB_HS_BASE_ADDR			(MX25_USB_BASE_ADDR + 0x0400)
-#define MX25_CSI_BASE_ADDR		0x53ff8000
-
-#define MX25_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX25_IO_ADDRESS(x)		IOMEM(MX25_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX25_INT_CSPI3		(NR_IRQS_LEGACY + 0)
-#define MX25_INT_I2C1		(NR_IRQS_LEGACY + 3)
-#define MX25_INT_I2C2		(NR_IRQS_LEGACY + 4)
-#define MX25_INT_UART4		(NR_IRQS_LEGACY + 5)
-#define MX25_INT_ESDHC2		(NR_IRQS_LEGACY + 8)
-#define MX25_INT_ESDHC1		(NR_IRQS_LEGACY + 9)
-#define MX25_INT_I2C3		(NR_IRQS_LEGACY + 10)
-#define MX25_INT_SSI2		(NR_IRQS_LEGACY + 11)
-#define MX25_INT_SSI1		(NR_IRQS_LEGACY + 12)
-#define MX25_INT_CSPI2		(NR_IRQS_LEGACY + 13)
-#define MX25_INT_CSPI1		(NR_IRQS_LEGACY + 14)
-#define MX25_INT_GPIO3		(NR_IRQS_LEGACY + 16)
-#define MX25_INT_CSI		(NR_IRQS_LEGACY + 17)
-#define MX25_INT_UART3		(NR_IRQS_LEGACY + 18)
-#define MX25_INT_GPIO4		(NR_IRQS_LEGACY + 23)
-#define MX25_INT_KPP		(NR_IRQS_LEGACY + 24)
-#define MX25_INT_DRYICE		(NR_IRQS_LEGACY + 25)
-#define MX25_INT_PWM1		(NR_IRQS_LEGACY + 26)
-#define MX25_INT_UART2		(NR_IRQS_LEGACY + 32)
-#define MX25_INT_NFC		(NR_IRQS_LEGACY + 33)
-#define MX25_INT_SDMA		(NR_IRQS_LEGACY + 34)
-#define MX25_INT_USB_HS		(NR_IRQS_LEGACY + 35)
-#define MX25_INT_PWM2		(NR_IRQS_LEGACY + 36)
-#define MX25_INT_USB_OTG	(NR_IRQS_LEGACY + 37)
-#define MX25_INT_LCDC		(NR_IRQS_LEGACY + 39)
-#define MX25_INT_UART5		(NR_IRQS_LEGACY + 40)
-#define MX25_INT_PWM3		(NR_IRQS_LEGACY + 41)
-#define MX25_INT_PWM4		(NR_IRQS_LEGACY + 42)
-#define MX25_INT_CAN1		(NR_IRQS_LEGACY + 43)
-#define MX25_INT_CAN2		(NR_IRQS_LEGACY + 44)
-#define MX25_INT_UART1		(NR_IRQS_LEGACY + 45)
-#define MX25_INT_GPIO2		(NR_IRQS_LEGACY + 51)
-#define MX25_INT_GPIO1		(NR_IRQS_LEGACY + 52)
-#define MX25_INT_GPT1		(NR_IRQS_LEGACY + 54)
-#define MX25_INT_FEC		(NR_IRQS_LEGACY + 57)
-
-#define MX25_DMA_REQ_SSI2_RX1	22
-#define MX25_DMA_REQ_SSI2_TX1	23
-#define MX25_DMA_REQ_SSI2_RX0	24
-#define MX25_DMA_REQ_SSI2_TX0	25
-#define MX25_DMA_REQ_SSI1_RX1	26
-#define MX25_DMA_REQ_SSI1_TX1	27
-#define MX25_DMA_REQ_SSI1_RX0	28
-#define MX25_DMA_REQ_SSI1_TX0	29
-
-#ifndef __ASSEMBLY__
-extern int mx25_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX25_H__ */

arch/arm/mach-imx/pm-imx6.c

@@ -310,10 +310,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 	 *    Low-Power mode.
 	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
 	 *    is set (set bits 0-1 of CCM_CLPCR).
+	 *
+	 * Note that IRQ #32 is GIC SPI #0.
 	 */
-	imx_gpc_hwirq_unmask(32);
+	imx_gpc_hwirq_unmask(0);
 	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_hwirq_mask(32);
+	imx_gpc_hwirq_mask(0);
 
 	return 0;
 }

drivers/bus/imx-weim.c

@@ -142,7 +142,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
 							   &pdev->dev);
 	const struct imx_weim_devtype *devtype = of_id->data;
 	struct device_node *child;
-	int ret;
+	int ret, have_child = 0;
 
 	if (devtype == &imx50_weim_devtype) {
 		ret = imx_weim_gpr_setup(pdev);
@@ -155,14 +155,15 @@ static int __init weim_parse_dt(struct platform_device *pdev,
 			continue;
 
 		ret = weim_timing_setup(child, base, devtype);
-		if (ret) {
-			dev_err(&pdev->dev, "%s set timing failed.\n",
+		if (ret)
+			dev_warn(&pdev->dev, "%s set timing failed.\n",
 				child->full_name);
-			return ret;
-		}
+		else
+			have_child = 1;
 	}
 
-	ret = of_platform_populate(pdev->dev.of_node,
+	if (have_child)
+		ret = of_platform_populate(pdev->dev.of_node,
 				   of_default_bus_match_table,
 				   NULL, &pdev->dev);
 	if (ret)

drivers/irqchip/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_TB10X_IRQC)		+= irq-tb10x.o
 obj-$(CONFIG_XTENSA)			+= irq-xtensa-pic.o
 obj-$(CONFIG_XTENSA_MX)			+= irq-xtensa-mx.o
 obj-$(CONFIG_IRQ_CROSSBAR)		+= irq-crossbar.o
+obj-$(CONFIG_SOC_VF610)			+= irq-vf610-mscm-ir.o
 obj-$(CONFIG_BCM7120_L2_IRQ)		+= irq-bcm7120-l2.o
 obj-$(CONFIG_BRCMSTB_L2_IRQ)		+= irq-brcmstb-l2.o
 obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o

drivers/irqchip/irq-vf610-mscm-ir.c

@@ -0,0 +1,212 @@
+/*
+ * Copyright (C) 2014-2015 Toradex AG
+ * Author: Stefan Agner <stefan@agner.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * IRQ chip driver for MSCM interrupt router available on Vybrid SoC's.
+ * The interrupt router is between the CPU's interrupt controller and the
+ * peripheral. The router allows to route the peripheral interrupts to
+ * one of the two available CPU's on Vybrid VF6xx SoC's (Cortex-A5 or
+ * Cortex-M4). The router will be configured transparently on a IRQ
+ * request.
+ *
+ * o All peripheral interrupts of the Vybrid SoC can be routed to
+ *   CPU 0, CPU 1 or both. The routing is useful for dual-core
+ *   variants of Vybrid SoC such as VF6xx. This driver routes the
+ *   requested interrupt to the CPU currently running on.
+ *
+ * o It is required to setup the interrupt router even on single-core
+ *   variants of Vybrid.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "irqchip.h"
+
+#define MSCM_CPxNUM		0x4
+
+#define MSCM_IRSPRC(n)		(0x80 + 2 * (n))
+#define MSCM_IRSPRC_CPEN_MASK	0x3
+
+#define MSCM_IRSPRC_NUM		112
+
+struct vf610_mscm_ir_chip_data {
+	void __iomem *mscm_ir_base;
+	u16 cpu_mask;
+	u16 saved_irsprc[MSCM_IRSPRC_NUM];
+};
+
+static struct vf610_mscm_ir_chip_data *mscm_ir_data;
+
+static inline void vf610_mscm_ir_save(struct vf610_mscm_ir_chip_data *data)
+{
+	int i;
+
+	for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+		data->saved_irsprc[i] = readw_relaxed(data->mscm_ir_base + MSCM_IRSPRC(i));
+}
+
+static inline void vf610_mscm_ir_restore(struct vf610_mscm_ir_chip_data *data)
+{
+	int i;
+
+	for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+		writew_relaxed(data->saved_irsprc[i], data->mscm_ir_base + MSCM_IRSPRC(i));
+}
+
+static int vf610_mscm_ir_notifier(struct notifier_block *self,
+				  unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_CLUSTER_PM_ENTER:
+		vf610_mscm_ir_save(mscm_ir_data);
+		break;
+	case CPU_CLUSTER_PM_ENTER_FAILED:
+	case CPU_CLUSTER_PM_EXIT:
+		vf610_mscm_ir_restore(mscm_ir_data);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mscm_ir_notifier_block = {
+	.notifier_call = vf610_mscm_ir_notifier,
+};
+
+static void vf610_mscm_ir_enable(struct irq_data *data)
+{
+	irq_hw_number_t hwirq = data->hwirq;
+	struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+	u16 irsprc;
+
+	irsprc = readw_relaxed(chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+	irsprc &= MSCM_IRSPRC_CPEN_MASK;
+
+	WARN_ON(irsprc & ~chip_data->cpu_mask);
+
+	writew_relaxed(chip_data->cpu_mask,
+		       chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+
+	irq_chip_unmask_parent(data);
+}
+
+static void vf610_mscm_ir_disable(struct irq_data *data)
+{
+	irq_hw_number_t hwirq = data->hwirq;
+	struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+
+	writew_relaxed(0x0, chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+
+	irq_chip_mask_parent(data);
+}
+
+static struct irq_chip vf610_mscm_ir_irq_chip = {
+	.name			= "mscm-ir",
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_enable		= vf610_mscm_ir_enable,
+	.irq_disable		= vf610_mscm_ir_disable,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+};
+
+static int vf610_mscm_ir_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				      unsigned int nr_irqs, void *arg)
+{
+	int i;
+	irq_hw_number_t hwirq;
+	struct of_phandle_args *irq_data = arg;
+	struct of_phandle_args gic_data;
+
+	if (irq_data->args_count != 2)
+		return -EINVAL;
+
+	hwirq = irq_data->args[0];
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+					      &vf610_mscm_ir_irq_chip,
+					      domain->host_data);
+
+	gic_data.np = domain->parent->of_node;
+	gic_data.args_count = 3;
+	gic_data.args[0] = GIC_SPI;
+	gic_data.args[1] = irq_data->args[0];
+	gic_data.args[2] = irq_data->args[1];
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &gic_data);
+}
+
+static const struct irq_domain_ops mscm_irq_domain_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.alloc = vf610_mscm_ir_domain_alloc,
+	.free = irq_domain_free_irqs_common,
+};
+
+static int __init vf610_mscm_ir_of_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	struct irq_domain *domain, *domain_parent;
+	struct regmap *mscm_cp_regmap;
+	int ret, cpuid;
+
+	domain_parent = irq_find_host(parent);
+	if (!domain_parent) {
+		pr_err("vf610_mscm_ir: interrupt-parent not found\n");
+		return -EINVAL;
+	}
+
+	mscm_ir_data = kzalloc(sizeof(*mscm_ir_data), GFP_KERNEL);
+	if (!mscm_ir_data)
+		return -ENOMEM;
+
+	mscm_ir_data->mscm_ir_base = of_io_request_and_map(node, 0, "mscm-ir");
+
+	if (!mscm_ir_data->mscm_ir_base) {
+		pr_err("vf610_mscm_ir: unable to map mscm register\n");
+		ret = -ENOMEM;
+		goto out_free;
+	}
+
+	mscm_cp_regmap = syscon_regmap_lookup_by_phandle(node, "fsl,cpucfg");
+	if (IS_ERR(mscm_cp_regmap)) {
+		ret = PTR_ERR(mscm_cp_regmap);
+		pr_err("vf610_mscm_ir: regmap lookup for cpucfg failed\n");
+		goto out_unmap;
+	}
+
+	regmap_read(mscm_cp_regmap, MSCM_CPxNUM, &cpuid);
+	mscm_ir_data->cpu_mask = 0x1 << cpuid;
+
+	domain = irq_domain_add_hierarchy(domain_parent, 0,
+					  MSCM_IRSPRC_NUM, node,
+					  &mscm_irq_domain_ops, mscm_ir_data);
+	if (!domain) {
+		ret = -ENOMEM;
+		goto out_unmap;
+	}
+
+	cpu_pm_register_notifier(&mscm_ir_notifier_block);
+
+	return 0;
+
+out_unmap:
+	iounmap(mscm_ir_data->mscm_ir_base);
+out_free:
+	kfree(mscm_ir_data);
+	return ret;
+}
+IRQCHIP_DECLARE(vf610_mscm_ir, "fsl,vf610-mscm-ir", vf610_mscm_ir_of_init);

include/dt-bindings/clock/imx6qdl-clock.h

@@ -248,6 +248,9 @@
 #define IMX6QDL_PLL6_BYPASS			235
 #define IMX6QDL_PLL7_BYPASS			236
 #define IMX6QDL_CLK_GPT_3M			237
-#define IMX6QDL_CLK_END				238
+#define IMX6QDL_CLK_VIDEO_27M			238
+#define IMX6QDL_CLK_MIPI_CORE_CFG		239
+#define IMX6QDL_CLK_MIPI_IPG			240
+#define IMX6QDL_CLK_END				241
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -207,6 +207,7 @@
 #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1	(0x1 << 6)
 #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0	(0x2 << 6)
 #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1	(0x3 << 6)
+#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT		4
 #define IMX6Q_GPR3_MIPI_MUX_CTL_MASK		(0x3 << 4)
 #define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0	(0x0 << 4)
 #define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1	(0x1 << 4)