Merge tag 'v3.19-rc6' into HEAD

Linux 3.19-rc6

Documentation/ABI/testing/sysfs-class-mei

@@ -14,3 +14,18 @@ Description:
 		The /sys/class/mei/meiN directory is created for
 		each probed mei device
 
+What:		/sys/class/mei/meiN/fw_status
+Date:		Nov 2014
+KernelVersion:	3.19
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display fw status registers content
+
+		The ME FW writes its status information into fw status
+		registers for BIOS and OS to monitor fw health.
+
+		The register contains running state, power management
+		state, error codes, and others. The way the registers
+		are decoded depends on PCH or SoC generation.
+		Also number of registers varies between 1 and 6
+		depending on generation.
+

Documentation/ABI/testing/sysfs-platform-dell-laptop

@@ -1,60 +0,0 @@
-What:		/sys/class/leds/dell::kbd_backlight/als_setting
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to control the automatic keyboard
-		illumination mode on some systems that have an ambient
-		light sensor. Write 1 to this file to enable the auto
-		mode, 0 to disable it.
-
-What:		/sys/class/leds/dell::kbd_backlight/start_triggers
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to control the input triggers that
-		turn on the keyboard backlight illumination that is
-		disabled because of inactivity.
-		Read the file to see the triggers available. The ones
-		enabled are preceded by '+', those disabled by '-'.
-
-		To enable a trigger, write its name preceded by '+' to
-		this file. To disable a trigger, write its name preceded
-		by '-' instead.
-
-		For example, to enable the keyboard as trigger run:
-		    echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-		To disable it:
-		    echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
-
-		Note that not all the available triggers can be configured.
-
-What:		/sys/class/leds/dell::kbd_backlight/stop_timeout
-Date:		December 2014
-KernelVersion:	3.19
-Contact:	Gabriele Mazzotta <gabriele.mzt@gmail.com>,
-		Pali Rohár <pali.rohar@gmail.com>
-Description:
-		This file allows to specify the interval after which the
-		keyboard illumination is disabled because of inactivity.
-		The timeouts are expressed in seconds, minutes, hours and
-		days, for which the symbols are 's', 'm', 'h' and 'd'
-		respectively.
-
-		To configure the timeout, write to this file a value along
-		with any the above units. If no unit is specified, the value
-		is assumed to be expressed in seconds.
-
-		For example, to set the timeout to 10 minutes run:
-		    echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
-
-		Note that when this file is read, the returned value might be
-		expressed in a different unit than the one used when the timeout
-		was set.
-
-		Also note that only some timeouts are supported and that
-		some systems might fall back to a specific timeout in case
-		an invalid timeout is written to this file.

Documentation/devicetree/bindings/net/davinci_emac.txt

@@ -4,7 +4,8 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+  "ti,dm816-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register

Documentation/kernel-parameters.txt

@@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
+	i8042.kbdreset  [HW] Reset device connected to KBD port
 
 	i810=		[HW,DRM]
 

Documentation/networking/ip-sysctl.txt

@@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
 	this when using large numbers of interfaces and/or routes.
+	From linux kernel 3.6 onwards, this is deprecated for ipv4
+	as route cache is no longer used.
 
 neigh/default/gc_thresh1 - INTEGER
 	Minimum number of entries to keep.  Garbage collector will not

Documentation/target/tcm_mod_builder.py

@@ -389,9 +389,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.release_cmd			= " + fabric_mod_name + "_release_cmd,\n"
 	buf += "	.shutdown_session		= " + fabric_mod_name + "_shutdown_session,\n"
 	buf += "	.close_session			= " + fabric_mod_name + "_close_session,\n"
-	buf += "	.stop_session			= " + fabric_mod_name + "_stop_session,\n"
-	buf += "	.fall_back_to_erl0		= " + fabric_mod_name + "_reset_nexus,\n"
-	buf += "	.sess_logged_in			= " + fabric_mod_name + "_sess_logged_in,\n"
 	buf += "	.sess_get_index			= " + fabric_mod_name + "_sess_get_index,\n"
 	buf += "	.sess_get_initiator_sid		= NULL,\n"
 	buf += "	.write_pending			= " + fabric_mod_name + "_write_pending,\n"
@@ -402,7 +399,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.queue_data_in			= " + fabric_mod_name + "_queue_data_in,\n"
 	buf += "	.queue_status			= " + fabric_mod_name + "_queue_status,\n"
 	buf += "	.queue_tm_rsp			= " + fabric_mod_name + "_queue_tm_rsp,\n"
-	buf += "	.is_state_remove		= " + fabric_mod_name + "_is_state_remove,\n"
+	buf += "	.aborted_task			= " + fabric_mod_name + "_aborted_task,\n"
 	buf += "	/*\n"
 	buf += "	 * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
 	buf += "	 */\n"
@@ -428,7 +425,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	/*\n"
 	buf += "	 * Register the top level struct config_item_type with TCM core\n"
 	buf += "	 */\n"
-	buf += "	fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
+	buf += "	fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name + "\");\n"
 	buf += "	if (IS_ERR(fabric)) {\n"
 	buf += "		printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
 	buf += "		return PTR_ERR(fabric);\n"
@@ -595,7 +592,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 		if re.search('get_fabric_name', fo):
 			buf += "char *" + fabric_mod_name + "_get_fabric_name(void)\n"
 			buf += "{\n"
-			buf += "	return \"" + fabric_mod_name[4:] + "\";\n"
+			buf += "	return \"" + fabric_mod_name + "\";\n"
 			buf += "}\n\n"
 			bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
 			continue
@@ -820,27 +817,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			buf += "}\n\n"
 			bufi += "void " + fabric_mod_name + "_close_session(struct se_session *);\n"
 
-		if re.search('stop_session\)\(', fo):
-			buf += "void " + fabric_mod_name + "_stop_session(struct se_session *se_sess, int sess_sleep , int conn_sleep)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_stop_session(struct se_session *, int, int);\n"
-
-		if re.search('fall_back_to_erl0\)\(', fo):
-			buf += "void " + fabric_mod_name + "_reset_nexus(struct se_session *se_sess)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_reset_nexus(struct se_session *);\n"
-
-		if re.search('sess_logged_in\)\(', fo):
-			buf += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *se_sess)\n"
-			buf += "{\n"
-			buf += "	return 0;\n"
-			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *);\n"
-
 		if re.search('sess_get_index\)\(', fo):
 			buf += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *se_sess)\n"
 			buf += "{\n"
@@ -898,19 +874,18 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 			bufi += "int " + fabric_mod_name + "_queue_status(struct se_cmd *);\n"
 
 		if re.search('queue_tm_rsp\)\(', fo):
-			buf += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
+			buf += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
-			buf += "	return 0;\n"
+			buf += "	return;\n"
 			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
+			bufi += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
 
-		if re.search('is_state_remove\)\(', fo):
-			buf += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *se_cmd)\n"
+		if re.search('aborted_task\)\(', fo):
+			buf += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
-			buf += "	return 0;\n"
+			buf += "	return;\n"
 			buf += "}\n\n"
-			bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
-
+			bufi += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *);\n"
 
 	ret = p.write(buf)
 	if ret:
@@ -1018,11 +993,11 @@ def main(modname, proto_ident):
 	tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name)
 	tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name)
 
-	input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Makefile..? [yes,no]: ")
+	input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Makefile..? [yes,no]: ")
 	if input == "yes" or input == "y":
 		tcm_mod_add_kbuild(tcm_dir, fabric_mod_name)
 
-	input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Kconfig..? [yes,no]: ")
+	input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Kconfig..? [yes,no]: ")
 	if input == "yes" or input == "y":
 		tcm_mod_add_kconfig(tcm_dir, fabric_mod_name)
 

Documentation/thermal/cpu-cooling-api.txt

@@ -3,7 +3,7 @@ CPU cooling APIs How To
 
 Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
 
-Updated: 12 May 2012
+Updated: 6 Jan 2015
 
 Copyright (c)  2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
 
@@ -25,7 +25,18 @@ the user. The registration APIs returns the cooling device pointer.
 
    clip_cpus: cpumask of cpus where the frequency constraints will happen.
 
-1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
+	struct device_node *np, const struct cpumask *clip_cpus)
+
+    This interface function registers the cpufreq cooling device with
+    the name "thermal-cpufreq-%x" linking it with a device tree node, in
+    order to bind it via the thermal DT code. This api can support multiple
+    instances of cpufreq cooling devices.
+
+    np: pointer to the cooling device device tree node
+    clip_cpus: cpumask of cpus where the frequency constraints will happen.
+
+1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
     This interface function unregisters the "thermal-cpufreq-%x" cooling device.
 

MAINTAINERS

@@ -754,13 +754,6 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/aptina-pll.*
 
-ARASAN COMPACT FLASH PATA CONTROLLER
-M:	Viresh Kumar <viresh.linux@gmail.com>
-L:	linux-ide@vger.kernel.org
-S:	Maintained
-F:	include/linux/pata_arasan_cf_data.h
-F:	drivers/ata/pata_arasan_cf.c
-
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
@@ -2346,7 +2339,8 @@ CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
 L:	linux-can@vger.kernel.org
 W:	http://gitorious.org/linux-can
-T:	git git://gitorious.org/linux-can/linux-can-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
 F:	Documentation/networking/can.txt
 F:	net/can/
@@ -2361,7 +2355,8 @@ M:	Wolfgang Grandegger <wg@grandegger.com>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
 W:	http://gitorious.org/linux-can
-T:	git git://gitorious.org/linux-can/linux-can-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
 F:	drivers/net/can/
 F:	include/linux/can/dev.h
@@ -3183,7 +3178,7 @@ L:	dmaengine@vger.kernel.org
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 S:	Maintained
 F:	drivers/dma/
-F:	include/linux/dma*
+F:	include/linux/dmaengine.h
 F:	Documentation/dmaengine/
 T:	git git://git.infradead.org/users/vkoul/slave-dma.git
 
@@ -4749,20 +4744,20 @@ S:	Supported
 F:	drivers/scsi/ipr.*
 
 IBM Power Virtual Ethernet Device Driver
-M:	Santiago Leon <santil@linux.vnet.ibm.com>
+M:	Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/ibm/ibmveth.*
 
 IBM Power Virtual SCSI Device Drivers
-M:	Nathan Fontenot <nfont@linux.vnet.ibm.com>
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/ibmvscsi/ibmvscsi*
 F:	drivers/scsi/ibmvscsi/viosrp.h
 
 IBM Power Virtual FC Device Drivers
-M:	Brian King <brking@linux.vnet.ibm.com>
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/ibmvscsi/ibmvfc*
@@ -4930,7 +4925,6 @@ F:	include/uapi/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
 M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
-M:	Dmitry Torokhov <dtor@mail.ru>
 L:	linux-input@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-input/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
@@ -4952,7 +4946,6 @@ K:	\b(ABS|SYN)_MT_
 INTEL C600 SERIES SAS CONTROLLER DRIVER
 M:	Intel SCU Linux support <intel-linux-scu@intel.com>
 M:	Artur Paszkiewicz <artur.paszkiewicz@intel.com>
-M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.code.sf.net/p/intel-sas/isci
 S:	Supported
@@ -5280,6 +5273,15 @@ W:	www.open-iscsi.org
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/ulp/iser/
 
+ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
+M:	Sagi Grimberg <sagig@mellanox.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
+L:	linux-rdma@vger.kernel.org
+L:	target-devel@vger.kernel.org
+S:	Supported
+W:	http://www.linux-iscsi.org
+F:	drivers/infiniband/ulp/isert
+
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
@@ -5694,6 +5696,49 @@ F:	drivers/lguest/
 F:	include/linux/lguest*.h
 F:	tools/lguest/
 
+LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/
+F:	include/linux/ata.h
+F:	include/linux/libata.h
+
+LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
+M:	Viresh Kumar <viresh.linux@gmail.com>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	include/linux/pata_arasan_cf_data.h
+F:	drivers/ata/pata_arasan_cf.c
+
+LIBATA PATA DRIVERS
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/pata_*.c
+F:	drivers/ata/ata_generic.c
+
+LIBATA SATA AHCI PLATFORM devices support
+M:	Hans de Goede <hdegoede@redhat.com>
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/ahci_platform.c
+F:	drivers/ata/libahci_platform.c
+F:	include/linux/ahci_platform.h
+
+LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
+M:	Mikael Pettersson <mikpelinux@gmail.com>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/sata_promise.*
+
 LIBLOCKDEP
 M:	Sasha Levin <sasha.levin@oracle.com>
 S:	Maintained
@@ -7228,7 +7273,7 @@ S:	Maintained
 F:	drivers/pci/host/*layerscape*
 
 PCI DRIVER FOR IMX6
-M:	Richard Zhu <r65037@freescale.com>
+M:	Richard Zhu <Richard.Zhu@freescale.com>
 M:	Lucas Stach <l.stach@pengutronix.de>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -7398,6 +7443,7 @@ F:	drivers/crypto/picoxcell*
 PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-gpio@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
 S:	Maintained
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
@@ -7565,12 +7611,6 @@ W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
 F:	drivers/net/wireless/prism54/
 
-PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-M:	Mikael Pettersson <mikpelinux@gmail.com>
-L:	linux-ide@vger.kernel.org
-S:	Maintained
-F:	drivers/ata/sata_promise.*
-
 PS3 NETWORK SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
@@ -7736,8 +7776,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/
 
 QLOGIC QLA4XXX iSCSI DRIVER
-M:	Vikas Chaudhary <vikas.chaudhary@qlogic.com>
-M:	iscsi-driver@qlogic.com
+M:	QLogic-Storage-Upstream@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla4xxx
@@ -8545,25 +8584,6 @@ S:	Maintained
 F:	drivers/misc/phantom.c
 F:	include/uapi/linux/phantom.h
 
-SERIAL ATA (SATA) SUBSYSTEM
-M:	Tejun Heo <tj@kernel.org>
-L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S:	Supported
-F:	drivers/ata/
-F:	include/linux/ata.h
-F:	include/linux/libata.h
-
-SERIAL ATA AHCI PLATFORM devices support
-M:	Hans de Goede <hdegoede@redhat.com>
-M:	Tejun Heo <tj@kernel.org>
-L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S:	Supported
-F:	drivers/ata/ahci_platform.c
-F:	drivers/ata/libahci_platform.c
-F:	include/linux/ahci_platform.h
-
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
 M:	Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
 L:	linux-scsi@vger.kernel.org
@@ -9532,7 +9552,8 @@ F:	drivers/platform/x86/thinkpad_acpi.c
 TI BANDGAP AND THERMAL DRIVER
 M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-pm@vger.kernel.org
-S:	Supported
+L:	linux-omap@vger.kernel.org
+S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
 TI CLOCK DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/alpha/kernel/pci.c

@@ -285,8 +285,12 @@ pcibios_claim_one_bus(struct pci_bus *b)
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
-			    (r->flags & IORESOURCE_PCI_FIXED))
-				pci_claim_resource(dev, i);
+			    (r->flags & IORESOURCE_PCI_FIXED)) {
+				if (pci_claim_resource(dev, i) == 0)
+					continue;
+
+				pci_claim_bridge_resource(dev, i);
+			}
 		}
 	}
 

arch/arm/boot/dts/at91sam9263.dtsi

@@ -953,6 +953,8 @@
 			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "lcdc_clk", "hclk";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/berlin2q-marvell-dmp.dts

@@ -65,6 +65,8 @@
 };
 
 &sdhci2 {
+	broken-cd;
+	bus-width = <8>;
 	non-removable;
 	status = "okay";
 };

arch/arm/boot/dts/berlin2q.dtsi

@@ -83,7 +83,8 @@
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SDIO1XIN>;
+			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clock-names = "io", "core";
 			status = "disabled";
 		};
 
@@ -348,36 +349,6 @@
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			};
-
-			gpio4: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			gpio5: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
 		};
 
 		chip: chip-control@ea0000 {
@@ -466,6 +437,21 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
 			i2c2: i2c@7000 {
 				compatible = "snps,designware-i2c";
 				#address-cells = <1>;
@@ -516,6 +502,21 @@
 				status = "disabled";
 			};
 
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
 			sysctrl: pin-controller@d000 {
 				compatible = "marvell,berlin2q-system-ctrl";
 				reg = <0xd000 0x100>;

arch/arm/boot/dts/dra7-evm.dts

@@ -499,23 +499,23 @@
 		};
 		partition@5 {
 			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00010000>;
+			reg = <0x00140000 0x00080000>;
 		};
 		partition@6 {
 			label = "QSPI.u-boot-env";
-			reg = <0x00150000 0x00010000>;
+			reg = <0x001c0000 0x00010000>;
 		};
 		partition@7 {
 			label = "QSPI.u-boot-env.backup1";
-			reg = <0x00160000 0x0010000>;
+			reg = <0x001d0000 0x0010000>;
 		};
 		partition@8 {
 			label = "QSPI.kernel";
-			reg = <0x00170000 0x0800000>;
+			reg = <0x001e0000 0x0800000>;
 		};
 		partition@9 {
 			label = "QSPI.file-system";
-			reg = <0x00970000 0x01690000>;
+			reg = <0x009e0000 0x01620000>;
 		};
 	};
 };

arch/arm/boot/dts/dra7.dtsi

@@ -1257,6 +1257,8 @@
 				tx-fifo-resize;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
 			};
 		};
 
@@ -1278,6 +1280,8 @@
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
 			};
 		};
 
@@ -1299,6 +1303,8 @@
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
 			};
 		};
 

arch/arm/boot/dts/exynos5250.dtsi

@@ -736,7 +736,7 @@
 
 	dp_phy: video-phy@10040720 {
 		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040720 4>;
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#phy-cells = <0>;
 	};
 

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -372,3 +372,7 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
+
+&cci {
+	status = "disabled";
+};

arch/arm/boot/dts/exynos5420.dtsi

@@ -120,7 +120,7 @@
 		};
 	};
 
-	cci@10d20000 {
+	cci: cci@10d20000 {
 		compatible = "arm,cci-400";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -503,8 +503,8 @@
 	};
 
 	dp_phy: video-phy@10040728 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040728 4>;
+		compatible = "samsung,exynos5420-dp-video-phy";
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#phy-cells = <0>;
 	};
 

arch/arm/boot/dts/imx25.dtsi

@@ -162,7 +162,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>, <&clks 62>;
+				clocks = <&clks 78>, <&clks 78>;
 				clock-names = "ipg", "per";
 				interrupts = <14>;
 				status = "disabled";
@@ -369,7 +369,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 36>;
+				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <36>;
 			};
@@ -388,7 +388,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 36>;
+				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <41>;
 			};
@@ -429,7 +429,7 @@
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 36>;
+				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <42>;
 			};
@@ -476,7 +476,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 36>;
+				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};

arch/arm/boot/dts/imx51-babbage.dts

@@ -127,24 +127,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reg_usbh1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1reg>;
-			reg = <0>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usbotg_vbus: regulator@1 {
+		reg_hub_reset: regulator@0 {
 			compatible = "regulator-fixed";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <1>;
-			regulator-name = "usbotg_vbus";
+			reg = <0>;
+			regulator-name = "hub_reset";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
@@ -176,6 +164,7 @@
 			reg = <0>;
 			clocks = <&clks IMX5_CLK_DUMMY>;
 			clock-names = "main_clk";
+			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
@@ -419,7 +408,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&reg_hub_reset>;
 	fsl,usbphy = <&usbh1phy>;
 	phy_type = "ulpi";
 	status = "okay";
@@ -429,7 +418,6 @@
 	dr_mode = "otg";
 	disable-over-current;
 	phy_type = "utmi_wide";
-	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -335,8 +335,8 @@
 			vpu: vpu@02040000 {
 				compatible = "cnm,coda960";
 				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
-				             <0 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "bit", "jpeg";
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>,

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -159,13 +159,28 @@
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-supply = <&reg_enet_3v3>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy2: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
 };
 
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
 	status = "okay";
 };
 

arch/arm/boot/dts/ls1021a.dtsi

@@ -142,6 +142,7 @@
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1021a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
 		};
 
 		clockgen: clocking@1ee1000 {

arch/arm/boot/dts/omap3-n900.dts

@@ -700,11 +700,9 @@
 		};
 	};
 
+	/* Ethernet is on some early development boards and qemu */
 	ethernet@gpmc {
 		compatible = "smsc,lan91c94";
-
-		status = "disabled";
-
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
 		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -155,6 +155,15 @@
 };
 
 &pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
 	backlight {
 		bl_en: bl-en {
 			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -173,6 +182,27 @@
 		};
 	};
 
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on EVB board so bump up to 8ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;

arch/arm/boot/dts/sama5d3xmb.dtsi

@@ -176,7 +176,7 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"MICBIAS", "IN1L",
+			"Mic", "MICBIAS",
 			"IN1L", "Mic";
 
 		atmel,ssc-controller = <&ssc0>;

arch/arm/boot/dts/sama5d4.dtsi

@@ -1008,7 +1008,7 @@
 
 			pit: timer@fc068630 {
 				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfc068630 0xf>;
+				reg = <0xfc068630 0x10>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
 				clocks = <&h32ck>;
 			};

arch/arm/boot/dts/ste-nomadik-nhk15.dts

@@ -25,11 +25,11 @@
 		stmpe2401_1 {
 			stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
 				nhk_cfg1 {
-					ste,pins = "GPIO76_B20"; // IRQ line
+					pins = "GPIO76_B20"; // IRQ line
 					ste,input = <0>;
 				};
 				nhk_cfg2 {
-					ste,pins = "GPIO77_B8"; // reset line
+					pins = "GPIO77_B8"; // reset line
 					ste,output = <1>;
 				};
 			};
@@ -37,11 +37,11 @@
 		stmpe2401_2 {
 			stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
 				nhk_cfg1 {
-					ste,pins = "GPIO78_A8"; // IRQ line
+					pins = "GPIO78_A8"; // IRQ line
 					ste,input = <0>;
 				};
 				nhk_cfg2 {
-					ste,pins = "GPIO79_C9"; // reset line
+					pins = "GPIO79_C9"; // reset line
 					ste,output = <1>;
 				};
 			};

arch/arm/boot/dts/vf610-twr.dts

@@ -129,13 +129,28 @@
 
 &fec0 {
 	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
 };
 
 &fec1 {
 	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";

arch/arm/configs/exynos_defconfig

@@ -84,7 +84,8 @@ CONFIG_DEBUG_GPIO=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_CHARGER_TPS65090=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+CONFIG_SENSORS_LM90=y
 CONFIG_THERMAL=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_EXYNOS_THERMAL_CORE=y
@@ -109,11 +110,26 @@ CONFIG_REGULATOR_S2MPA01=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS65090=y
+CONFIG_DRM=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_PTN3460=y
+CONFIG_DRM_PS8622=y
+CONFIG_DRM_EXYNOS=y
+CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_DP=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SIMPLE=y
 CONFIG_EXYNOS_VIDEO=y
 CONFIG_EXYNOS_MIPI_DSI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_7x14=y

arch/arm/configs/omap2plus_defconfig

@@ -68,7 +68,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_GENERIC_CPUFREQ_CPU0=y
+CONFIG_CPUFREQ_DT=y
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_CPU_IDLE=y
 CONFIG_BINFMT_MISC=y

arch/arm/kernel/entry-header.S

@@ -253,21 +253,22 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
-	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	mov	r2, sp
+	ldr	r1, [r2, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [r2, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
 	@ We must avoid clrex due to Cortex-A15 erratum #830321
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	strex	r1, r2, [r2]			@ clear the exclusive monitor
 #endif
 	.if	\fast
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	ldmdb	r2, {r1 - lr}^			@ get calling r1 - lr
 	.else
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	ldmdb	r2, {r0 - lr}^			@ get calling r0 - lr
 	.endif
 	mov	r0, r0				@ ARMv5T and earlier require a nop
 						@ after ldm {}^
-	add	sp, sp, #S_FRAME_SIZE - S_PC
+	add	sp, sp, #\offset + S_FRAME_SIZE
 	movs	pc, lr				@ return & move spsr_svc into cpsr
 	.endm
 

arch/arm/kernel/perf_event.c

@@ -116,8 +116,14 @@ int armpmu_event_set_period(struct perf_event *event)
 		ret = 1;
 	}
 
-	if (left > (s64)armpmu->max_period)
-		left = armpmu->max_period;
+	/*
+	 * Limit the maximum period to prevent the counter value
+	 * from overtaking the one we are about to program. In
+	 * effect we are reducing max_period to account for
+	 * interrupt latency (and we are being very conservative).
+	 */
+	if (left > (armpmu->max_period >> 1))
+		left = armpmu->max_period >> 1;
 
 	local64_set(&hwc->prev_count, (u64)-left);
 

arch/arm/kernel/setup.c

@@ -657,10 +657,13 @@ int __init arm_add_memory(u64 start, u64 size)
 
 	/*
 	 * Ensure that start/size are aligned to a page boundary.
-	 * Size is appropriately rounded down, start is rounded up.
+	 * Size is rounded down, start is rounded up.
 	 */
-	size -= start & ~PAGE_MASK;
 	aligned_start = PAGE_ALIGN(start);
+	if (aligned_start > start + size)
+		size = 0;
+	else
+		size -= aligned_start - start;
 
 #ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
 	if (aligned_start > ULONG_MAX) {

arch/arm/mach-at91/board-dt-sama5.c

@@ -17,6 +17,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/clk-provider.h>
+#include <linux/phy.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -26,8 +27,25 @@
 
 #include "generic.h"
 
+static int ksz8081_phy_fixup(struct phy_device *phy)
+{
+	int value;
+
+	value = phy_read(phy, 0x16);
+	value &= ~0x20;
+	phy_write(phy, 0x16, value);
+
+	return 0;
+}
+
 static void __init sama5_dt_device_init(void)
 {
+	if (of_machine_is_compatible("atmel,sama5d4ek") &&
+	   IS_ENABLED(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_id("fc028000.etherne:00",
+						ksz8081_phy_fixup);
+	}
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 

arch/arm/mach-imx/clk-imx6q.c

@@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		post_div_table[1].div = 1;
 		post_div_table[2].div = 1;
 		video_div_table[1].div = 1;
-		video_div_table[2].div = 1;
+		video_div_table[3].div = 1;
 	}
 
 	clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));

arch/arm/mach-imx/clk-imx6sx.c

@@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
 	clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
 
+	clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+	clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 }

arch/arm/mach-mvebu/coherency.c

@@ -246,9 +246,14 @@ static int coherency_type(void)
 	return type;
 }
 
+/*
+ * As a precaution, we currently completely disable hardware I/O
+ * coherency, until enough testing is done with automatic I/O
+ * synchronization barriers to validate that it is a proper solution.
+ */
 int coherency_available(void)
 {
-	return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+	return false;
 }
 
 int __init coherency_init(void)

arch/arm/mach-omap2/board-generic.c

@@ -77,6 +77,24 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
+/* Some boards need board name for legacy userspace in /proc/cpuinfo */
+static const char *const n900_boards_compat[] __initconst = {
+	"nokia,omap3-n900",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.dt_compat	= n900_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
+/* Generic omap3 boards, most boards can use these */
 static const char *const omap3_boards_compat[] __initconst = {
 	"ti,omap3430",
 	"ti,omap3",

arch/arm/mach-omap2/common.h

@@ -211,6 +211,7 @@ extern struct device *omap2_get_iva_device(void);
 extern struct device *omap2_get_l3_device(void);
 extern struct device *omap4_get_dsp_device(void);
 
+unsigned int omap4_xlate_irq(unsigned int hwirq);
 void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
@@ -249,6 +250,7 @@ extern void omap4_cpu_die(unsigned int cpu);
 extern struct smp_operations omap4_smp_ops;
 
 extern void omap5_secondary_startup(void);
+extern void omap5_secondary_hyp_startup(void);
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)

arch/arm/mach-omap2/control.h

@@ -286,6 +286,10 @@
 #define OMAP5XXX_CONTROL_STATUS                0x134
 #define OMAP5_DEVICETYPE_MASK          (0x7 << 6)
 
+/* DRA7XX CONTROL CORE BOOTSTRAP */
+#define DRA7_CTRL_CORE_BOOTSTRAP	0x6c4
+#define DRA7_SPEEDSELECT_MASK		(0x3 << 8)
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.

arch/arm/mach-omap2/omap-headsmp.S

@@ -22,6 +22,7 @@
 
 /* Physical address needed since MMU not enabled yet on secondary core */
 #define AUX_CORE_BOOT0_PA			0x48281800
+#define API_HYP_ENTRY				0x102
 
 /*
  * OMAP5 specific entry point for secondary CPU to jump from ROM
@@ -40,6 +41,26 @@ wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	bne	wait
 	b	secondary_startup
 ENDPROC(omap5_secondary_startup)
+/*
+ * Same as omap5_secondary_startup except we call into the ROM to
+ * enable HYP mode first.  This is called instead of
+ * omap5_secondary_startup if the primary CPU was put into HYP mode by
+ * the boot loader.
+ */
+ENTRY(omap5_secondary_hyp_startup)
+wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait_2
+	ldr	r12, =API_HYP_ENTRY
+	adr	r0, hyp_boot
+	smc	#0
+hyp_boot:
+	b	secondary_startup
+ENDPROC(omap5_secondary_hyp_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which

arch/arm/mach-omap2/omap-smp.c

@@ -22,6 +22,7 @@
 #include <linux/irqchip/arm-gic.h>
 
 #include <asm/smp_scu.h>
+#include <asm/virt.h>
 
 #include "omap-secure.h"
 #include "omap-wakeupgen.h"
@@ -227,8 +228,16 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	if (omap_secure_apis_support())
 		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
 	else
-		writel_relaxed(virt_to_phys(omap5_secondary_startup),
-			       base + OMAP_AUX_CORE_BOOT_1);
+		/*
+		 * If the boot CPU is in HYP mode then start secondary
+		 * CPU in HYP mode as well.
+		 */
+		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+			writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
+				       base + OMAP_AUX_CORE_BOOT_1);
+		else
+			writel_relaxed(virt_to_phys(omap5_secondary_startup),
+				       base + OMAP_AUX_CORE_BOOT_1);
 
 }
 

arch/arm/mach-omap2/omap4-common.c

@@ -256,6 +256,38 @@ static int __init omap4_sar_ram_init(void)
 }
 omap_early_initcall(omap4_sar_ram_init);
 
+static struct of_device_id gic_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", },
+	{ .compatible = "arm,cortex-a15-gic", },
+	{ },
+};
+
+static struct device_node *gic_node;
+
+unsigned int omap4_xlate_irq(unsigned int hwirq)
+{
+	struct of_phandle_args irq_data;
+	unsigned int irq;
+
+	if (!gic_node)
+		gic_node = of_find_matching_node(NULL, gic_match);
+
+	if (WARN_ON(!gic_node))
+		return hwirq;
+
+	irq_data.np = gic_node;
+	irq_data.args_count = 3;
+	irq_data.args[0] = 0;
+	irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
+	irq_data.args[2] = IRQ_TYPE_LEVEL_HIGH;
+
+	irq = irq_create_of_mapping(&irq_data);
+	if (WARN_ON(!irq))
+		irq = hwirq;
+
+	return irq;
+}
+
 void __init omap_gic_of_init(void)
 {
 	struct device_node *np;

arch/arm/mach-omap2/omap_hwmod.c

@@ -3534,9 +3534,15 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 
 	mpu_irqs_cnt = _count_mpu_irqs(oh);
 	for (i = 0; i < mpu_irqs_cnt; i++) {
+		unsigned int irq;
+
+		if (oh->xlate_irq)
+			irq = oh->xlate_irq((oh->mpu_irqs + i)->irq);
+		else
+			irq = (oh->mpu_irqs + i)->irq;
 		(res + r)->name = (oh->mpu_irqs + i)->name;
-		(res + r)->start = (oh->mpu_irqs + i)->irq;
-		(res + r)->end = (oh->mpu_irqs + i)->irq;
+		(res + r)->start = irq;
+		(res + r)->end = irq;
 		(res + r)->flags = IORESOURCE_IRQ;
 		r++;
 	}

arch/arm/mach-omap2/omap_hwmod.h

@@ -676,6 +676,7 @@ struct omap_hwmod {
 	spinlock_t			_lock;
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
+	unsigned int			(*xlate_irq)(unsigned int);
 	u16				flags;
 	u8				mpu_rt_idx;
 	u8				response_lat;

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -479,6 +479,7 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = {
 	.class		= &omap44xx_dma_hwmod_class,
 	.clkdm_name	= "l3_dma_clkdm",
 	.mpu_irqs	= omap44xx_dma_system_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.main_clk	= "l3_div_ck",
 	.prcm = {
 		.omap4 = {
@@ -640,6 +641,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.class		= &omap44xx_dispc_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_dispc_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_dispc_sdma_reqs,
 	.main_clk	= "dss_dss_clk",
 	.prcm = {
@@ -693,6 +695,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
 	.class		= &omap44xx_dsi_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_dsi1_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_dsi1_sdma_reqs,
 	.main_clk	= "dss_dss_clk",
 	.prcm = {
@@ -726,6 +729,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
 	.class		= &omap44xx_dsi_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_dsi2_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_dsi2_sdma_reqs,
 	.main_clk	= "dss_dss_clk",
 	.prcm = {
@@ -784,6 +788,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	 */
 	.flags		= HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
 	.main_clk	= "dss_48mhz_clk",
 	.prcm = {

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -288,6 +288,7 @@ static struct omap_hwmod omap54xx_dma_system_hwmod = {
 	.class		= &omap54xx_dma_hwmod_class,
 	.clkdm_name	= "dma_clkdm",
 	.mpu_irqs	= omap54xx_dma_system_irqs,
+	.xlate_irq	= omap4_xlate_irq,
 	.main_clk	= "l3_iclk_div",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/prcm-common.h

@@ -498,6 +498,7 @@ struct omap_prcm_irq_setup {
 	u8 nr_irqs;
 	const struct omap_prcm_irq *irqs;
 	int irq;
+	unsigned int (*xlate_irq)(unsigned int);
 	void (*read_pending_irqs)(unsigned long *events);
 	void (*ocp_barrier)(void);
 	void (*save_and_clear_irqen)(u32 *saved_mask);

arch/arm/mach-omap2/prm44xx.c

@@ -49,6 +49,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.irqs			= omap4_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
 	.irq			= 11 + OMAP44XX_IRQ_GIC_START,
+	.xlate_irq		= omap4_xlate_irq,
 	.read_pending_irqs	= &omap44xx_prm_read_pending_irqs,
 	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,
@@ -751,8 +752,10 @@ static int omap44xx_prm_late_init(void)
 		}
 
 		/* Once OMAP4 DT is filled as well */
-		if (irq_num >= 0)
+		if (irq_num >= 0) {
 			omap4_prcm_irq_setup.irq = irq_num;
+			omap4_prcm_irq_setup.xlate_irq = NULL;
+		}
 	}
 
 	omap44xx_prm_enable_io_wakeup();

arch/arm/mach-omap2/prm_common.c

@@ -187,6 +187,7 @@ int omap_prcm_event_to_irq(const char *name)
  */
 void omap_prcm_irq_cleanup(void)
 {
+	unsigned int irq;
 	int i;
 
 	if (!prcm_irq_setup) {
@@ -211,7 +212,11 @@ void omap_prcm_irq_cleanup(void)
 	kfree(prcm_irq_setup->priority_mask);
 	prcm_irq_setup->priority_mask = NULL;
 
-	irq_set_chained_handler(prcm_irq_setup->irq, NULL);
+	if (prcm_irq_setup->xlate_irq)
+		irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq);
+	else
+		irq = prcm_irq_setup->irq;
+	irq_set_chained_handler(irq, NULL);
 
 	if (prcm_irq_setup->base_irq > 0)
 		irq_free_descs(prcm_irq_setup->base_irq,
@@ -259,6 +264,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	int offset, i;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
+	unsigned int irq;
 
 	if (!irq_setup)
 		return -EINVAL;
@@ -298,7 +304,11 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 				1 << (offset & 0x1f);
 	}
 
-	irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
+	if (irq_setup->xlate_irq)
+		irq = irq_setup->xlate_irq(irq_setup->irq);
+	else
+		irq = irq_setup->irq;
+	irq_set_chained_handler(irq, omap_prcm_irq_handler);
 
 	irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
 		0);

arch/arm/mach-omap2/timer.c

@@ -54,6 +54,7 @@
 
 #include "soc.h"
 #include "common.h"
+#include "control.h"
 #include "powerdomain.h"
 #include "omap-secure.h"
 
@@ -496,7 +497,8 @@ static void __init realtime_counter_init(void)
 	void __iomem *base;
 	static struct clk *sys_clk;
 	unsigned long rate;
-	unsigned int reg, num, den;
+	unsigned int reg;
+	unsigned long long num, den;
 
 	base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
 	if (!base) {
@@ -511,13 +513,42 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+
+	if (soc_is_dra7xx()) {
+		/*
+		 * Errata i856 says the 32.768KHz crystal does not start at
+		 * power on, so the CPU falls back to an emulated 32KHz clock
+		 * based on sysclk / 610 instead. This causes the master counter
+		 * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2
+		 * (OR sysclk * 75 / 244)
+		 *
+		 * This affects at least the DRA7/AM572x 1.0, 1.1 revisions.
+		 * Of course any board built without a populated 32.768KHz
+		 * crystal would also need this fix even if the CPU is fixed
+		 * later.
+		 *
+		 * Either case can be detected by using the two speedselect bits
+		 * If they are not 0, then the 32.768KHz clock driving the
+		 * coarse counter that corrects the fine counter every time it
+		 * ticks is actually rate/610 rather than 32.768KHz and we
+		 * should compensate to avoid the 570ppm (at 20MHz, much worse
+		 * at other rates) too fast system time.
+		 */
+		reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP);
+		if (reg & DRA7_SPEEDSELECT_MASK) {
+			num = 75;
+			den = 244;
+			goto sysclk1_based;
+		}
+	}
+
 	/* Numerator/denumerator values refer TRM Realtime Counter section */
 	switch (rate) {
-	case 1200000:
+	case 12000000:
 		num = 64;
 		den = 125;
 		break;
-	case 1300000:
+	case 13000000:
 		num = 768;
 		den = 1625;
 		break;
@@ -529,11 +560,11 @@ static void __init realtime_counter_init(void)
 		num = 192;
 		den = 625;
 		break;
-	case 2600000:
+	case 26000000:
 		num = 384;
 		den = 1625;
 		break;
-	case 2700000:
+	case 27000000:
 		num = 256;
 		den = 1125;
 		break;
@@ -545,6 +576,7 @@ static void __init realtime_counter_init(void)
 		break;
 	}
 
+sysclk1_based:
 	/* Program numerator and denumerator registers */
 	reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
@@ -556,7 +588,7 @@ static void __init realtime_counter_init(void)
 	reg |= den;
 	writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
-	arch_timer_freq = (rate / den) * num;
+	arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den);
 	set_cntfreq();
 
 	iounmap(base);

arch/arm/mach-omap2/twl-common.c

@@ -66,19 +66,24 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+#ifdef CONFIG_ARCH_OMAP4
 void __init omap4_pmic_init(const char *pmic_type,
 		    struct twl4030_platform_data *pmic_data,
 		    struct i2c_board_info *devices, int nr_devices)
 {
 	/* PMIC part*/
+	unsigned int irq;
+
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
-	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
+	irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START);
+	omap_pmic_init(1, 400, pmic_type, irq, pmic_data);
 
 	/* Register additional devices on i2c1 bus if needed */
 	if (devices)
 		i2c_register_board_info(1, devices, nr_devices);
 }
+#endif
 
 void __init omap_pmic_late_init(void)
 {

arch/arm/mach-rockchip/rockchip.c

@@ -19,11 +19,37 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "core.h"
 
+#define RK3288_GRF_SOC_CON0 0x244
+
+static void __init rockchip_timer_init(void)
+{
+	if (of_machine_is_compatible("rockchip,rk3288")) {
+		struct regmap *grf;
+
+		/*
+		 * Disable auto jtag/sdmmc switching that causes issues
+		 * with the mmc controllers making them unreliable
+		 */
+		grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf");
+		if (!IS_ERR(grf))
+			regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000);
+		else
+			pr_err("rockchip: could not get grf syscon\n");
+	}
+
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
 static void __init rockchip_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = {
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
+	.init_time	= rockchip_timer_init,
 	.dt_compat	= rockchip_board_dt_compat,
 	.init_machine	= rockchip_dt_init,
 MACHINE_END

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -800,7 +800,14 @@ void __init r8a7740_init_irq_of(void)
 	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
 	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
 
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
 	irqchip_init();
+#endif
 
 	/* route signals to GIC */
 	iowrite32(0x0, pfc_inta_ctrl);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -576,11 +576,18 @@ void __init r8a7778_init_irq_extpin(int irlm)
 void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
+#endif
 
 	BUG_ON(!base);
 
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
 	irqchip_init();
-
+#endif
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -720,10 +720,17 @@ static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
 
 void __init r8a7779_init_irq_dt(void)
 {
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	void __iomem *gic_dist_base = ioremap_nocache(0xf0001000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xf0000100, 0x1000);
+#endif
 	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
 
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
 	irqchip_init();
-
+#endif
 	/* route all interrupts to ARM */
 	__raw_writel(0xffffffff, INT2NTSR0);
 	__raw_writel(0x3fffffff, INT2NTSR1);

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -595,6 +595,7 @@ static struct platform_device ipmmu_device = {
 
 static struct renesas_intc_irqpin_config irqpin0_platform_data = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
+	.control_parent = true,
 };
 
 static struct resource irqpin0_resources[] = {
@@ -656,6 +657,7 @@ static struct platform_device irqpin1_device = {
 
 static struct renesas_intc_irqpin_config irqpin2_platform_data = {
 	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
+	.control_parent = true,
 };
 
 static struct resource irqpin2_resources[] = {
@@ -686,6 +688,7 @@ static struct platform_device irqpin2_device = {
 
 static struct renesas_intc_irqpin_config irqpin3_platform_data = {
 	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
+	.control_parent = true,
 };
 
 static struct resource irqpin3_resources[] = {

arch/arm64/Makefile

@@ -85,6 +85,7 @@ vdso_install:
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)$(MAKE) $(clean)=$(boot)/dts
 
 define archhelp
   echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'

arch/arm64/boot/dts/Makefile

@@ -3,6 +3,4 @@ dts-dirs += apm
 dts-dirs += arm
 dts-dirs += cavium
 
-always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb

arch/arm64/boot/dts/arm/juno.dts

@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		stdout-path = &soc_uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	psci {

arch/arm64/include/asm/kvm_emulate.h

@@ -41,6 +41,8 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
 static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
+	if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
+		vcpu->arch.hcr_el2 &= ~HCR_RW;
 }
 
 static inline unsigned long *vcpu_pc(const struct kvm_vcpu *vcpu)

arch/arm64/include/asm/unistd.h

@@ -44,7 +44,7 @@
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
 
-#define __NR_compat_syscalls		387
+#define __NR_compat_syscalls		388
 #endif
 
 #define __ARCH_WANT_SYS_CLONE

arch/arm64/include/asm/unistd32.h

@@ -795,3 +795,5 @@ __SYSCALL(__NR_getrandom, sys_getrandom)
 __SYSCALL(__NR_memfd_create, sys_memfd_create)
 #define __NR_bpf 386
 __SYSCALL(__NR_bpf, sys_bpf)
+#define __NR_execveat 387
+__SYSCALL(__NR_execveat, compat_sys_execveat)

arch/arm64/kvm/hyp.S

@@ -1014,6 +1014,7 @@ ENTRY(__kvm_tlb_flush_vmid_ipa)
 	 * Instead, we invalidate Stage-2 for this IPA, and the
 	 * whole of Stage-1. Weep...
 	 */
+	lsr	x1, x1, #12
 	tlbi	ipas2e1is, x1
 	/*
 	 * We have to ensure completion of the invalidation at Stage-2,

arch/arm64/kvm/reset.c

@@ -90,7 +90,6 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 			if (!cpu_has_32bit_el1())
 				return -EINVAL;
 			cpu_reset = &default_regs_reset32;
-			vcpu->arch.hcr_el2 &= ~HCR_RW;
 		} else {
 			cpu_reset = &default_regs_reset;
 		}

arch/arm64/mm/dump.c

@@ -15,6 +15,7 @@
  */
 #include <linux/debugfs.h>
 #include <linux/fs.h>
+#include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>

arch/arm64/mm/init.c

@@ -335,14 +335,8 @@ static int keep_initrd;
 
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
-	if (!keep_initrd) {
-		if (start == initrd_start)
-			start = round_down(start, PAGE_SIZE);
-		if (end == initrd_end)
-			end = round_up(end, PAGE_SIZE);
-
+	if (!keep_initrd)
 		free_reserved_area((void *)start, (void *)end, 0, "initrd");
-	}
 }
 
 static int __init keepinitrd_setup(char *__unused)

arch/avr32/kernel/module.c

@@ -19,12 +19,10 @@
 #include <linux/moduleloader.h>
 #include <linux/vmalloc.h>
 
-void module_free(struct module *mod, void *module_region)
+void module_arch_freeing_init(struct module *mod)
 {
 	vfree(mod->arch.syminfo);
 	mod->arch.syminfo = NULL;
-
-	vfree(module_region);
 }
 
 static inline int check_rela(Elf32_Rela *rela, struct module *module,
@@ -291,12 +289,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 
 	return ret;
 }
-
-int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		    struct module *module)
-{
-	vfree(module->arch.syminfo);
-	module->arch.syminfo = NULL;
-
-	return 0;
-}

arch/cris/arch-v32/drivers/sync_serial.c

@@ -604,7 +604,7 @@ static ssize_t __sync_serial_read(struct file *file,
 				  struct timespec *ts)
 {
 	unsigned long flags;
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = MINOR(file_inode(file)->i_rdev);
 	int avail;
 	struct sync_port *port;
 	unsigned char *start;

arch/cris/kernel/module.c

@@ -36,7 +36,7 @@ void *module_alloc(unsigned long size)
 }
 
 /* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_memfree(void *module_region)
 {
 	kfree(module_region);
 }

arch/frv/mb93090-mb00/pci-frv.c

@@ -94,7 +94,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				r = &dev->resource[idx];
 				if (!r->start)
 					continue;
-				pci_claim_resource(dev, idx);
+				pci_claim_bridge_resource(dev, idx);
 			}
 		}
 		pcibios_allocate_bus_resources(&bus->children);

arch/ia64/kernel/module.c

@@ -305,14 +305,12 @@ plt_target (struct plt_entry *plt)
 #endif /* !USE_BRL */
 
 void
-module_free (struct module *mod, void *module_region)
+module_arch_freeing_init (struct module *mod)
 {
-	if (mod && mod->arch.init_unw_table &&
-	    module_region == mod->module_init) {
+	if (mod->arch.init_unw_table) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
 		mod->arch.init_unw_table = NULL;
 	}
-	vfree(module_region);
 }
 
 /* Have we already seen one of these relocations? */

arch/ia64/pci/pci.c

@@ -487,45 +487,39 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 	return 0;
 }
 
-static int is_valid_resource(struct pci_dev *dev, int idx)
+void pcibios_fixup_device_resources(struct pci_dev *dev)
 {
-	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-	struct resource *devr = &dev->resource[idx], *busr;
+	int idx;
 
 	if (!dev->bus)
-		return 0;
-
-	pci_bus_for_each_resource(dev->bus, busr, i) {
-		if (!busr || ((busr->flags ^ devr->flags) & type_mask))
-			continue;
-		if ((devr->start) && (devr->start >= busr->start) &&
-				(devr->end <= busr->end))
-			return 1;
-	}
-	return 0;
-}
+		return;
 
-static void pcibios_fixup_resources(struct pci_dev *dev, int start, int limit)
-{
-	int i;
+	for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
 
-	for (i = start; i < limit; i++) {
-		if (!dev->resource[i].flags)
+		if (!r->flags || r->parent || !r->start)
 			continue;
-		if ((is_valid_resource(dev, i)))
-			pci_claim_resource(dev, i);
-	}
-}
 
-void pcibios_fixup_device_resources(struct pci_dev *dev)
-{
-	pcibios_fixup_resources(dev, 0, PCI_BRIDGE_RESOURCES);
+		pci_claim_resource(dev, idx);
+	}
 }
 EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources);
 
 static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
 {
-	pcibios_fixup_resources(dev, PCI_BRIDGE_RESOURCES, PCI_NUM_RESOURCES);
+	int idx;
+
+	if (!dev->bus)
+		return;
+
+	for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
+
+		if (!r->flags || r->parent || !r->start)
+			continue;
+
+		pci_claim_bridge_resource(dev, idx);
+	}
 }
 
 /*

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		355
+#define NR_syscalls		356
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -360,5 +360,6 @@
 #define __NR_getrandom		352
 #define __NR_memfd_create	353
 #define __NR_bpf		354
+#define __NR_execveat		355
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -375,4 +375,5 @@ ENTRY(sys_call_table)
 	.long sys_getrandom
 	.long sys_memfd_create
 	.long sys_bpf
+	.long sys_execveat		/* 355 */
 

arch/microblaze/pci/pci-common.c

@@ -1026,6 +1026,8 @@ static void pcibios_allocate_bus_resources(struct pci_bus *bus)
 			 pr, (pr && pr->name) ? pr->name : "nil");
 
 		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+			struct pci_dev *dev = bus->self;
+
 			if (request_resource(pr, res) == 0)
 				continue;
 			/*
@@ -1035,6 +1037,12 @@ static void pcibios_allocate_bus_resources(struct pci_bus *bus)
 			 */
 			if (reparent_resources(pr, res) == 0)
 				continue;
+
+			if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
+			    pci_claim_bridge_resource(dev,
+						 i + PCI_BRIDGE_RESOURCES) == 0)
+				continue;
+
 		}
 		pr_warn("PCI: Cannot allocate resource region ");
 		pr_cont("%d of PCI bridge %d, will remap\n", i, bus->number);
@@ -1227,7 +1235,10 @@ void pcibios_claim_one_bus(struct pci_bus *bus)
 				 (unsigned long long)r->end,
 				 (unsigned int)r->flags);
 
-			pci_claim_resource(dev, i);
+			if (pci_claim_resource(dev, i) == 0)
+				continue;
+
+			pci_claim_bridge_resource(dev, i);
 		}
 	}
 

arch/mips/net/bpf_jit.c

@@ -1388,7 +1388,7 @@ void bpf_jit_compile(struct bpf_prog *fp)
 void bpf_jit_free(struct bpf_prog *fp)
 {
 	if (fp->jited)
-		module_free(NULL, fp->bpf_func);
+		module_memfree(fp->bpf_func);
 
 	bpf_prog_unlock_free(fp);
 }

arch/mn10300/unit-asb2305/pci-asb2305.c

@@ -106,7 +106,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				if (!r->flags)
 					continue;
 				if (!r->start ||
-				    pci_claim_resource(dev, idx) < 0) {
+				    pci_claim_bridge_resource(dev, idx) < 0) {
 					printk(KERN_ERR "PCI:"
 					       " Cannot allocate resource"
 					       " region %d of bridge %s\n",

arch/mn10300/unit-asb2305/pci.c

@@ -281,42 +281,37 @@ static int __init pci_check_direct(void)
 	return -ENODEV;
 }
 
-static int is_valid_resource(struct pci_dev *dev, int idx)
+static void pcibios_fixup_device_resources(struct pci_dev *dev)
 {
-	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-	struct resource *devr = &dev->resource[idx], *busr;
-
-	if (dev->bus) {
-		pci_bus_for_each_resource(dev->bus, busr, i) {
-			if (!busr || (busr->flags ^ devr->flags) & type_mask)
-				continue;
-
-			if (devr->start &&
-			    devr->start >= busr->start &&
-			    devr->end <= busr->end)
-				return 1;
-		}
-	}
+	int idx;
 
-	return 0;
+	if (!dev->bus)
+		return;
+
+	for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
+
+		if (!r->flags || r->parent || !r->start)
+			continue;
+
+		pci_claim_resource(dev, idx);
+	}
 }
 
-static void pcibios_fixup_device_resources(struct pci_dev *dev)
+static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
 {
-	int limit, i;
+	int idx;
 
-	if (dev->bus->number != 0)
+	if (!dev->bus)
 		return;
 
-	limit = (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) ?
-		PCI_BRIDGE_RESOURCES : PCI_NUM_RESOURCES;
+	for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
 
-	for (i = 0; i < limit; i++) {
-		if (!dev->resource[i].flags)
+		if (!r->flags || r->parent || !r->start)
 			continue;
 
-		if (is_valid_resource(dev, i))
-			pci_claim_resource(dev, i);
+		pci_claim_bridge_resource(dev, idx);
 	}
 }
 
@@ -330,7 +325,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 
 	if (bus->self) {
 		pci_read_bridge_bases(bus);
-		pcibios_fixup_device_resources(bus->self);
+		pcibios_fixup_bridge_resources(bus->self);
 	}
 
 	list_for_each_entry(dev, &bus->devices, bus_list)

arch/nios2/kernel/module.c

@@ -36,7 +36,7 @@ void *module_alloc(unsigned long size)
 }
 
 /* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_memfree(void *module_region)
 {
 	kfree(module_region);
 }

arch/nios2/kernel/signal.c

@@ -200,7 +200,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 
 	/* Set up to return from userspace; jump to fixed address sigreturn
 	   trampoline on kuser page.  */
-	regs->ra = (unsigned long) (0x1040);
+	regs->ra = (unsigned long) (0x1044);
 
 	/* Set up registers for signal handler */
 	regs->sp = (unsigned long) frame;

arch/parisc/kernel/module.c

@@ -298,14 +298,10 @@ static inline unsigned long count_stubs(const Elf_Rela *rela, unsigned long n)
 }
 #endif
 
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_arch_freeing_init(struct module *mod)
 {
 	kfree(mod->arch.section);
 	mod->arch.section = NULL;
-
-	vfree(module_region);
 }
 
 /* Additional bytes needed in front of individual sections */

arch/powerpc/crypto/sha1.c

@@ -154,4 +154,5 @@ module_exit(sha1_powerpc_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_ALIAS_CRYPTO("sha1-powerpc");

arch/powerpc/include/asm/thread_info.h

@@ -23,9 +23,9 @@
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 
 #ifdef CONFIG_PPC64
-#define CURRENT_THREAD_INFO(dest, sp)	clrrdi dest, sp, THREAD_SHIFT
+#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(clrrdi dest, sp, THREAD_SHIFT)
 #else
-#define CURRENT_THREAD_INFO(dest, sp)	rlwinm dest, sp, 0, 0, 31-THREAD_SHIFT
+#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(rlwinm dest, sp, 0, 0, 31-THREAD_SHIFT)
 #endif
 
 #ifndef __ASSEMBLY__
@@ -71,12 +71,13 @@ struct thread_info {
 #define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
 
 /* how to get the thread information struct from C */
-register unsigned long __current_r1 asm("r1");
 static inline struct thread_info *current_thread_info(void)
 {
-	/* gcc4, at least, is smart enough to turn this into a single
-	 * rlwinm for ppc32 and clrrdi for ppc64 */
-	return (struct thread_info *)(__current_r1 & ~(THREAD_SIZE-1));
+	unsigned long val;
+
+	asm (CURRENT_THREAD_INFO(%0,1) : "=r" (val));
+
+	return (struct thread_info *)val;
 }
 
 #endif /* __ASSEMBLY__ */

arch/powerpc/kernel/pci-common.c

@@ -1184,6 +1184,8 @@ static void pcibios_allocate_bus_resources(struct pci_bus *bus)
 			 pr, (pr && pr->name) ? pr->name : "nil");
 
 		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+			struct pci_dev *dev = bus->self;
+
 			if (request_resource(pr, res) == 0)
 				continue;
 			/*
@@ -1193,6 +1195,11 @@ static void pcibios_allocate_bus_resources(struct pci_bus *bus)
 			 */
 			if (reparent_resources(pr, res) == 0)
 				continue;
+
+			if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
+			    pci_claim_bridge_resource(dev,
+						i + PCI_BRIDGE_RESOURCES) == 0)
+				continue;
 		}
 		pr_warning("PCI: Cannot allocate resource region "
 			   "%d of PCI bridge %d, will remap\n", i, bus->number);
@@ -1401,7 +1408,10 @@ void pcibios_claim_one_bus(struct pci_bus *bus)
 				 (unsigned long long)r->end,
 				 (unsigned int)r->flags);
 
-			pci_claim_resource(dev, i);
+			if (pci_claim_resource(dev, i) == 0)
+				continue;
+
+			pci_claim_bridge_resource(dev, i);
 		}
 	}
 

arch/powerpc/net/bpf_jit_comp.c

@@ -699,7 +699,7 @@ void bpf_jit_compile(struct bpf_prog *fp)
 void bpf_jit_free(struct bpf_prog *fp)
 {
 	if (fp->jited)
-		module_free(NULL, fp->bpf_func);
+		module_memfree(fp->bpf_func);
 
 	bpf_prog_unlock_free(fp);
 }

arch/powerpc/platforms/powernv/opal-wrappers.S

@@ -40,7 +40,6 @@ BEGIN_FTR_SECTION;						\
 	b	1f;						\
 END_FTR_SECTION(0, 1);						\
 	ld	r12,opal_tracepoint_refcount@toc(r2);		\
-	std	r12,32(r1);					\
 	cmpdi	r12,0;						\
 	bne-	LABEL;						\
 1:

arch/s390/hypfs/hypfs_vm.c

@@ -231,7 +231,7 @@ int hypfs_vm_create_files(struct dentry *root)
 struct dbfs_d2fc_hdr {
 	u64	len;		/* Length of d2fc buffer without header */
 	u16	version;	/* Version of header */
-	char	tod_ext[16];	/* TOD clock for d2fc */
+	char	tod_ext[STORE_CLOCK_EXT_SIZE]; /* TOD clock for d2fc */
 	u64	count;		/* Number of VM guests in d2fc buffer */
 	char	reserved[30];
 } __attribute__ ((packed));

arch/s390/include/asm/irqflags.h

@@ -36,7 +36,7 @@ static inline notrace void __arch_local_irq_ssm(unsigned long flags)
 
 static inline notrace unsigned long arch_local_save_flags(void)
 {
-	return __arch_local_irq_stosm(0x00);
+	return __arch_local_irq_stnsm(0xff);
 }
 
 static inline notrace unsigned long arch_local_irq_save(void)

arch/s390/include/asm/timex.h

@@ -67,20 +67,22 @@ static inline void local_tick_enable(unsigned long long comp)
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+#define CLOCK_TICK_RATE		1193180 /* Underlying HZ */
+#define STORE_CLOCK_EXT_SIZE	16	/* stcke writes 16 bytes */
 
 typedef unsigned long long cycles_t;
 
-static inline void get_tod_clock_ext(char clk[16])
+static inline void get_tod_clock_ext(char *clk)
 {
-	typedef struct { char _[sizeof(clk)]; } addrtype;
+	typedef struct { char _[STORE_CLOCK_EXT_SIZE]; } addrtype;
 
 	asm volatile("stcke %0" : "=Q" (*(addrtype *) clk) : : "cc");
 }
 
 static inline unsigned long long get_tod_clock(void)
 {
-	unsigned char clk[16];
+	unsigned char clk[STORE_CLOCK_EXT_SIZE];
+
 	get_tod_clock_ext(clk);
 	return *((unsigned long long *)&clk[1]);
 }

arch/s390/include/uapi/asm/unistd.h

@@ -289,7 +289,8 @@
 #define __NR_bpf		351
 #define __NR_s390_pci_mmio_write	352
 #define __NR_s390_pci_mmio_read		353
-#define NR_syscalls 354
+#define __NR_execveat		354
+#define NR_syscalls 355
 
 /* 
  * There are some system calls that are not present on 64 bit, some

arch/s390/kernel/module.c

@@ -55,14 +55,10 @@ void *module_alloc(unsigned long size)
 }
 #endif
 
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_arch_freeing_init(struct module *mod)
 {
-	if (mod) {
-		vfree(mod->arch.syminfo);
-		mod->arch.syminfo = NULL;
-	}
-	vfree(module_region);
+	vfree(mod->arch.syminfo);
+	mod->arch.syminfo = NULL;
 }
 
 static void check_rela(Elf_Rela *rela, struct module *me)

arch/s390/kernel/syscalls.S

@@ -362,3 +362,4 @@ SYSCALL(sys_memfd_create,sys_memfd_create,compat_sys_memfd_create) /* 350 */
 SYSCALL(sys_bpf,sys_bpf,compat_sys_bpf)
 SYSCALL(sys_ni_syscall,sys_s390_pci_mmio_write,compat_sys_s390_pci_mmio_write)
 SYSCALL(sys_ni_syscall,sys_s390_pci_mmio_read,compat_sys_s390_pci_mmio_read)
+SYSCALL(sys_execveat,sys_execveat,compat_sys_execveat)

arch/s390/kernel/uprobes.c

@@ -48,6 +48,30 @@ bool arch_uprobe_xol_was_trapped(struct task_struct *tsk)
 	return false;
 }
 
+static int check_per_event(unsigned short cause, unsigned long control,
+			   struct pt_regs *regs)
+{
+	if (!(regs->psw.mask & PSW_MASK_PER))
+		return 0;
+	/* user space single step */
+	if (control == 0)
+		return 1;
+	/* over indication for storage alteration */
+	if ((control & 0x20200000) && (cause & 0x2000))
+		return 1;
+	if (cause & 0x8000) {
+		/* all branches */
+		if ((control & 0x80800000) == 0x80000000)
+			return 1;
+		/* branch into selected range */
+		if (((control & 0x80800000) == 0x80800000) &&
+		    regs->psw.addr >= current->thread.per_user.start &&
+		    regs->psw.addr <= current->thread.per_user.end)
+			return 1;
+	}
+	return 0;
+}
+
 int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
 	int fixup = probe_get_fixup_type(auprobe->insn);
@@ -71,9 +95,13 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 		if (regs->psw.addr - utask->xol_vaddr == ilen)
 			regs->psw.addr = utask->vaddr + ilen;
 	}
-	/* If per tracing was active generate trap */
-	if (regs->psw.mask & PSW_MASK_PER)
-		do_per_trap(regs);
+	if (check_per_event(current->thread.per_event.cause,
+			    current->thread.per_user.control, regs)) {
+		/* fix per address */
+		current->thread.per_event.address = utask->vaddr;
+		/* trigger per event */
+		set_pt_regs_flag(regs, PIF_PER_TRAP);
+	}
 	return 0;
 }
 
@@ -106,6 +134,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	clear_thread_flag(TIF_UPROBE_SINGLESTEP);
 	regs->int_code = auprobe->saved_int_code;
 	regs->psw.addr = current->utask->vaddr;
+	current->thread.per_event.address = current->utask->vaddr;
 }
 
 unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline,
@@ -146,17 +175,20 @@ static void adjust_psw_addr(psw_t *psw, unsigned long len)
 	__rc;						\
 })
 
-#define emu_store_ril(ptr, input)			\
+#define emu_store_ril(regs, ptr, input)			\
 ({							\
 	unsigned int mask = sizeof(*(ptr)) - 1;		\
+	__typeof__(ptr) __ptr = (ptr);			\
 	int __rc = 0;					\
 							\
 	if (!test_facility(34))				\
 		__rc = EMU_ILLEGAL_OP;			\
-	else if ((u64 __force)ptr & mask)		\
+	else if ((u64 __force)__ptr & mask)		\
 		__rc = EMU_SPECIFICATION;		\
-	else if (put_user(*(input), ptr))		\
+	else if (put_user(*(input), __ptr))		\
 		__rc = EMU_ADDRESSING;			\
+	if (__rc == 0)					\
+		sim_stor_event(regs, __ptr, mask + 1);	\
 	__rc;						\
 })
 
@@ -197,6 +229,25 @@ union split_register {
 	s16 s16[4];
 };
 
+/*
+ * If user per registers are setup to trace storage alterations and an
+ * emulated store took place on a fitting address a user trap is generated.
+ */
+static void sim_stor_event(struct pt_regs *regs, void *addr, int len)
+{
+	if (!(regs->psw.mask & PSW_MASK_PER))
+		return;
+	if (!(current->thread.per_user.control & PER_EVENT_STORE))
+		return;
+	if ((void *)current->thread.per_user.start > (addr + len))
+		return;
+	if ((void *)current->thread.per_user.end < addr)
+		return;
+	current->thread.per_event.address = regs->psw.addr;
+	current->thread.per_event.cause = PER_EVENT_STORE >> 16;
+	set_pt_regs_flag(regs, PIF_PER_TRAP);
+}
+
 /*
  * pc relative instructions are emulated, since parameters may not be
  * accessible from the xol area due to range limitations.
@@ -249,13 +300,13 @@ static void handle_insn_ril(struct arch_uprobe *auprobe, struct pt_regs *regs)
 			rc = emu_load_ril((u32 __user *)uptr, &rx->u64);
 			break;
 		case 0x07: /* sthrl */
-			rc = emu_store_ril((u16 __user *)uptr, &rx->u16[3]);
+			rc = emu_store_ril(regs, (u16 __user *)uptr, &rx->u16[3]);
 			break;
 		case 0x0b: /* stgrl */
-			rc = emu_store_ril((u64 __user *)uptr, &rx->u64);
+			rc = emu_store_ril(regs, (u64 __user *)uptr, &rx->u64);
 			break;
 		case 0x0f: /* strl */
-			rc = emu_store_ril((u32 __user *)uptr, &rx->u32[1]);
+			rc = emu_store_ril(regs, (u32 __user *)uptr, &rx->u32[1]);
 			break;
 		}
 		break;

arch/s390/kernel/vtime.c

@@ -128,8 +128,6 @@ void vtime_account_irq_enter(struct task_struct *tsk)
 	struct thread_info *ti = task_thread_info(tsk);
 	u64 timer, system;
 
-	WARN_ON_ONCE(!irqs_disabled());
-
 	timer = S390_lowcore.last_update_timer;
 	S390_lowcore.last_update_timer = get_vtimer();
 	S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;

arch/s390/mm/pgtable.c

@@ -322,11 +322,12 @@ static int gmap_alloc_table(struct gmap *gmap, unsigned long *table,
 static unsigned long __gmap_segment_gaddr(unsigned long *entry)
 {
 	struct page *page;
-	unsigned long offset;
+	unsigned long offset, mask;
 
 	offset = (unsigned long) entry / sizeof(unsigned long);
 	offset = (offset & (PTRS_PER_PMD - 1)) * PMD_SIZE;
-	page = pmd_to_page((pmd_t *) entry);
+	mask = ~(PTRS_PER_PMD * sizeof(pmd_t) - 1);
+	page = virt_to_page((void *)((unsigned long) entry & mask));
 	return page->index + offset;
 }
 

arch/s390/net/bpf_jit.S

@@ -22,8 +22,8 @@
  * skb_copy_bits takes 4 parameters:
  *   %r2 = skb pointer
  *   %r3 = offset into skb data
- *   %r4 = length to copy
- *   %r5 = pointer to temp buffer
+ *   %r4 = pointer to temp buffer
+ *   %r5 = length to copy
  */
 #define SKBDATA	%r8
 
@@ -44,8 +44,9 @@ ENTRY(sk_load_word)
 
 sk_load_word_slow:
 	lgr	%r9,%r2			# save %r2
-	lhi	%r4,4			# 4 bytes
-	la	%r5,160(%r15)		# pointer to temp buffer
+	lgr	%r3,%r1			# offset
+	la	%r4,160(%r15)		# pointer to temp buffer
+	lghi	%r5,4			# 4 bytes
 	brasl	%r14,skb_copy_bits	# get data from skb
 	l	%r5,160(%r15)		# load result from temp buffer
 	ltgr	%r2,%r2			# set cc to (%r2 != 0)
@@ -69,8 +70,9 @@ ENTRY(sk_load_half)
 
 sk_load_half_slow:
 	lgr	%r9,%r2			# save %r2
-	lhi	%r4,2			# 2 bytes
-	la	%r5,162(%r15)		# pointer to temp buffer
+	lgr	%r3,%r1			# offset
+	la	%r4,162(%r15)		# pointer to temp buffer
+	lghi	%r5,2			# 2 bytes
 	brasl	%r14,skb_copy_bits	# get data from skb
 	xc	160(2,%r15),160(%r15)
 	l	%r5,160(%r15)		# load result from temp buffer
@@ -95,8 +97,9 @@ ENTRY(sk_load_byte)
 
 sk_load_byte_slow:
 	lgr	%r9,%r2			# save %r2
-	lhi	%r4,1			# 1 bytes
-	la	%r5,163(%r15)		# pointer to temp buffer
+	lgr	%r3,%r1			# offset
+	la	%r4,163(%r15)		# pointer to temp buffer
+	lghi	%r5,1			# 1 byte
 	brasl	%r14,skb_copy_bits	# get data from skb
 	xc	160(3,%r15),160(%r15)
 	l	%r5,160(%r15)		# load result from temp buffer
@@ -104,11 +107,11 @@ sk_load_byte_slow:
 	lgr	%r2,%r9			# restore %r2
 	br	%r8
 
-	/* A = (*(u8 *)(skb->data+K) & 0xf) << 2 */
+	/* X = (*(u8 *)(skb->data+K) & 0xf) << 2 */
 ENTRY(sk_load_byte_msh)
 	llgfr	%r1,%r3			# extend offset
 	clr	%r11,%r3		# hlen < offset ?
-	jle	sk_load_byte_slow
+	jle	sk_load_byte_msh_slow
 	lhi	%r12,0
 	ic	%r12,0(%r1,%r10)	# get byte from skb
 	nill	%r12,0x0f
@@ -118,8 +121,9 @@ ENTRY(sk_load_byte_msh)
 
 sk_load_byte_msh_slow:
 	lgr	%r9,%r2			# save %r2
-	lhi	%r4,2			# 2 bytes
-	la	%r5,162(%r15)		# pointer to temp buffer
+	lgr	%r3,%r1			# offset
+	la	%r4,163(%r15)		# pointer to temp buffer
+	lghi	%r5,1			# 1 byte
 	brasl	%r14,skb_copy_bits	# get data from skb
 	xc	160(3,%r15),160(%r15)
 	l	%r12,160(%r15)		# load result from temp buffer

arch/s390/net/bpf_jit_comp.c

@@ -431,8 +431,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
 		EMIT4_DISP(0x88500000, K);
 		break;
 	case BPF_ALU | BPF_NEG: /* A = -A */
-		/* lnr %r5,%r5 */
-		EMIT2(0x1155);
+		/* lcr %r5,%r5 */
+		EMIT2(0x1355);
 		break;
 	case BPF_JMP | BPF_JA: /* ip += K */
 		offset = addrs[i + K] + jit->start - jit->prg;
@@ -448,15 +448,12 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
 		mask = 0x800000; /* je */
 kbranch:	/* Emit compare if the branch targets are different */
 		if (filter->jt != filter->jf) {
-			if (K <= 16383)
-				/* chi %r5,<K> */
-				EMIT4_IMM(0xa75e0000, K);
-			else if (test_facility(21))
+			if (test_facility(21))
 				/* clfi %r5,<K> */
 				EMIT6_IMM(0xc25f0000, K);
 			else
-				/* c %r5,<d(K)>(%r13) */
-				EMIT4_DISP(0x5950d000, EMIT_CONST(K));
+				/* cl %r5,<d(K)>(%r13) */
+				EMIT4_DISP(0x5550d000, EMIT_CONST(K));
 		}
 branch:		if (filter->jt == filter->jf) {
 			if (filter->jt == 0)
@@ -502,8 +499,8 @@ branch:		if (filter->jt == filter->jf) {
 xbranch:	/* Emit compare if the branch targets are different */
 		if (filter->jt != filter->jf) {
 			jit->seen |= SEEN_XREG;
-			/* cr %r5,%r12 */
-			EMIT2(0x195c);
+			/* clr %r5,%r12 */
+			EMIT2(0x155c);
 		}
 		goto branch;
 	case BPF_JMP | BPF_JSET | BPF_X: /* ip += (A & X) ? jt : jf */