drm/bridge/sii8620: remove HSIC initialization

HSIC initialization was taken from the vendor code. HSIC in MHL circuit
is not connected, so it is not possible to test it. Tests prove that
without HSIC the device works well. Therefore it can be removed.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511968368-30884-1-git-send-email-m.purski@samsung.com

drivers/gpu/drm/bridge/sil-sii8620.c

@@ -511,50 +511,12 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret)
 		 sink_str[ctx->sink_type], sink_name);
 }
 
-static void sii8620_hsic_init(struct sii8620 *ctx)
-{
-	if (!sii8620_is_mhl3(ctx))
-		return;
-
-	sii8620_write(ctx, REG_FCGC,
-		BIT_FCGC_HSIC_HOSTMODE | BIT_FCGC_HSIC_ENABLE);
-	sii8620_setbits(ctx, REG_HRXCTRL3,
-		BIT_HRXCTRL3_HRX_STAY_RESET | BIT_HRXCTRL3_STATUS_EN, ~0);
-	sii8620_setbits(ctx, REG_TTXNUMB, MSK_TTXNUMB_TTX_NUMBPS, 4);
-	sii8620_setbits(ctx, REG_TRXCTRL, BIT_TRXCTRL_TRX_FROM_SE_COC, ~0);
-	sii8620_setbits(ctx, REG_HTXCTRL, BIT_HTXCTRL_HTX_DRVCONN1, 0);
-	sii8620_setbits(ctx, REG_KEEPER, MSK_KEEPER_MODE, VAL_KEEPER_MODE_HOST);
-	sii8620_write_seq_static(ctx,
-		REG_TDMLLCTL, 0,
-		REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST |
-			BIT_UTSRST_KEEPER_SRST | BIT_UTSRST_FC_SRST,
-		REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST,
-		REG_HRXINTL, 0xff,
-		REG_HRXINTH, 0xff,
-		REG_TTXINTL, 0xff,
-		REG_TTXINTH, 0xff,
-		REG_TRXINTL, 0xff,
-		REG_TRXINTH, 0xff,
-		REG_HTXINTL, 0xff,
-		REG_HTXINTH, 0xff,
-		REG_FCINTR0, 0xff,
-		REG_FCINTR1, 0xff,
-		REG_FCINTR2, 0xff,
-		REG_FCINTR3, 0xff,
-		REG_FCINTR4, 0xff,
-		REG_FCINTR5, 0xff,
-		REG_FCINTR6, 0xff,
-		REG_FCINTR7, 0xff
-	);
-}
-
 static void sii8620_edid_read(struct sii8620 *ctx, int ret)
 {
 	if (ret < 0)
 		return;
 
 	sii8620_set_upstream_edid(ctx);
-	sii8620_hsic_init(ctx);
 	sii8620_enable_hpd(ctx);
 }