|
@@ -41,7 +41,7 @@ struct tda998x_priv {
|
|
|
u8 vip_cntrl_0;
|
|
|
u8 vip_cntrl_1;
|
|
|
u8 vip_cntrl_2;
|
|
|
- struct tda998x_encoder_params params;
|
|
|
+ struct tda998x_audio_params audio_params;
|
|
|
|
|
|
wait_queue_head_t wq_edid;
|
|
|
volatile int wq_edid_wait;
|
|
@@ -666,26 +666,16 @@ tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr,
|
|
|
reg_set(priv, REG_DIP_IF_FLAGS, bit);
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
-tda998x_write_aif(struct tda998x_priv *priv, struct tda998x_encoder_params *p)
|
|
|
+static int tda998x_write_aif(struct tda998x_priv *priv,
|
|
|
+ struct hdmi_audio_infoframe *cea)
|
|
|
{
|
|
|
union hdmi_infoframe frame;
|
|
|
|
|
|
- hdmi_audio_infoframe_init(&frame.audio);
|
|
|
-
|
|
|
- frame.audio.channels = p->audio_frame[1] & 0x07;
|
|
|
- frame.audio.channel_allocation = p->audio_frame[4];
|
|
|
- frame.audio.level_shift_value = (p->audio_frame[5] & 0x78) >> 3;
|
|
|
- frame.audio.downmix_inhibit = (p->audio_frame[5] & 0x80) >> 7;
|
|
|
-
|
|
|
- /*
|
|
|
- * L-PCM and IEC61937 compressed audio shall always set sample
|
|
|
- * frequency to "refer to stream". For others, see the HDMI
|
|
|
- * specification.
|
|
|
- */
|
|
|
- frame.audio.sample_frequency = (p->audio_frame[2] & 0x1c) >> 2;
|
|
|
+ frame.audio = *cea;
|
|
|
|
|
|
tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame);
|
|
|
+
|
|
|
+ return 0;
|
|
|
}
|
|
|
|
|
|
static void
|
|
@@ -710,20 +700,21 @@ static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
|
|
|
}
|
|
|
}
|
|
|
|
|
|
-static void
|
|
|
+static int
|
|
|
tda998x_configure_audio(struct tda998x_priv *priv,
|
|
|
- struct drm_display_mode *mode, struct tda998x_encoder_params *p)
|
|
|
+ struct tda998x_audio_params *params,
|
|
|
+ unsigned mode_clock)
|
|
|
{
|
|
|
u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv;
|
|
|
u32 n;
|
|
|
|
|
|
/* Enable audio ports */
|
|
|
- reg_write(priv, REG_ENA_AP, p->audio_cfg);
|
|
|
- reg_write(priv, REG_ENA_ACLK, p->audio_clk_cfg);
|
|
|
+ reg_write(priv, REG_ENA_AP, params->config);
|
|
|
|
|
|
/* Set audio input source */
|
|
|
- switch (p->audio_format) {
|
|
|
+ switch (params->format) {
|
|
|
case AFMT_SPDIF:
|
|
|
+ reg_write(priv, REG_ENA_ACLK, 0);
|
|
|
reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
|
|
|
clksel_aip = AIP_CLKSEL_AIP_SPDIF;
|
|
|
clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
|
|
@@ -731,15 +722,29 @@ tda998x_configure_audio(struct tda998x_priv *priv,
|
|
|
break;
|
|
|
|
|
|
case AFMT_I2S:
|
|
|
+ reg_write(priv, REG_ENA_ACLK, 1);
|
|
|
reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
|
|
|
clksel_aip = AIP_CLKSEL_AIP_I2S;
|
|
|
clksel_fs = AIP_CLKSEL_FS_ACLK;
|
|
|
- cts_n = CTS_N_M(3) | CTS_N_K(3);
|
|
|
+ switch (params->sample_width) {
|
|
|
+ case 16:
|
|
|
+ cts_n = CTS_N_M(3) | CTS_N_K(1);
|
|
|
+ break;
|
|
|
+ case 18:
|
|
|
+ case 20:
|
|
|
+ case 24:
|
|
|
+ cts_n = CTS_N_M(3) | CTS_N_K(2);
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ case 32:
|
|
|
+ cts_n = CTS_N_M(3) | CTS_N_K(3);
|
|
|
+ break;
|
|
|
+ }
|
|
|
break;
|
|
|
|
|
|
default:
|
|
|
BUG();
|
|
|
- return;
|
|
|
+ return -EINVAL;
|
|
|
}
|
|
|
|
|
|
reg_write(priv, REG_AIP_CLKSEL, clksel_aip);
|
|
@@ -755,11 +760,11 @@ tda998x_configure_audio(struct tda998x_priv *priv,
|
|
|
* assume 100MHz requires larger divider.
|
|
|
*/
|
|
|
adiv = AUDIO_DIV_SERCLK_8;
|
|
|
- if (mode->clock > 100000)
|
|
|
+ if (mode_clock > 100000)
|
|
|
adiv++; /* AUDIO_DIV_SERCLK_16 */
|
|
|
|
|
|
/* S/PDIF asks for a larger divider */
|
|
|
- if (p->audio_format == AFMT_SPDIF)
|
|
|
+ if (params->format == AFMT_SPDIF)
|
|
|
adiv++; /* AUDIO_DIV_SERCLK_16 or _32 */
|
|
|
|
|
|
reg_write(priv, REG_AUDIO_DIV, adiv);
|
|
@@ -768,7 +773,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
|
|
|
* This is the approximate value of N, which happens to be
|
|
|
* the recommended values for non-coherent clocks.
|
|
|
*/
|
|
|
- n = 128 * p->audio_sample_rate / 1000;
|
|
|
+ n = 128 * params->sample_rate / 1000;
|
|
|
|
|
|
/* Write the CTS and N values */
|
|
|
buf[0] = 0x44;
|
|
@@ -786,20 +791,21 @@ tda998x_configure_audio(struct tda998x_priv *priv,
|
|
|
reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
|
|
|
reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
|
|
|
|
|
|
- /* Write the channel status */
|
|
|
- buf[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
|
|
|
- buf[1] = 0x00;
|
|
|
- buf[2] = IEC958_AES3_CON_FS_NOTID;
|
|
|
- buf[3] = IEC958_AES4_CON_ORIGFS_NOTID |
|
|
|
- IEC958_AES4_CON_MAX_WORDLEN_24;
|
|
|
+ /* Write the channel status
|
|
|
+ * The REG_CH_STAT_B-registers skip IEC958 AES2 byte, because
|
|
|
+ * there is a separate register for each I2S wire.
|
|
|
+ */
|
|
|
+ buf[0] = params->status[0];
|
|
|
+ buf[1] = params->status[1];
|
|
|
+ buf[2] = params->status[3];
|
|
|
+ buf[3] = params->status[4];
|
|
|
reg_write_range(priv, REG_CH_STAT_B(0), buf, 4);
|
|
|
|
|
|
tda998x_audio_mute(priv, true);
|
|
|
msleep(20);
|
|
|
tda998x_audio_mute(priv, false);
|
|
|
|
|
|
- /* Write the audio information packet */
|
|
|
- tda998x_write_aif(priv, p);
|
|
|
+ return tda998x_write_aif(priv, ¶ms->cea);
|
|
|
}
|
|
|
|
|
|
/* DRM encoder functions */
|
|
@@ -820,7 +826,7 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv,
|
|
|
VIP_CNTRL_2_SWAP_F(p->swap_f) |
|
|
|
(p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
|
|
|
|
|
|
- priv->params = *p;
|
|
|
+ priv->audio_params = p->audio_params;
|
|
|
}
|
|
|
|
|
|
static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
|
|
@@ -1057,9 +1063,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
|
|
|
|
|
|
tda998x_write_avi(priv, adjusted_mode);
|
|
|
|
|
|
- if (priv->params.audio_cfg)
|
|
|
- tda998x_configure_audio(priv, adjusted_mode,
|
|
|
- &priv->params);
|
|
|
+ if (priv->audio_params.format != AFMT_UNUSED) {
|
|
|
+ tda998x_configure_audio(priv,
|
|
|
+ &priv->audio_params,
|
|
|
+ adjusted_mode->clock);
|
|
|
+ }
|
|
|
}
|
|
|
}
|
|
|
|