Merge branch 'topic/bcm' into for-linus

Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt

@@ -12,6 +12,10 @@ Required properties:
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain the DMA interrupts associated
 		to the DMA channels in ascending order.
+- interrupt-names: Should contain the names of the interrupt
+		   in the form "dmaXX".
+		   Use "dma-shared-all" for the common interrupt line
+		   that is shared by all dma channels.
 - #dma-cells: Must be <1>, the cell in the dmas property of the
 		client device represents the DREQ number.
 - brcm,dma-channel-mask: Bit mask representing the channels
@@ -34,13 +38,35 @@ dma: dma@7e007000 {
 		     <1 24>,
 		     <1 25>,
 		     <1 26>,
+		     /* dma channel 11-14 share one irq */
 		     <1 27>,
+		     <1 27>,
+		     <1 27>,
+		     <1 27>,
+		     /* unused shared irq for all channels */
 		     <1 28>;
+	interrupt-names = "dma0",
+			  "dma1",
+			  "dma2",
+			  "dma3",
+			  "dma4",
+			  "dma5",
+			  "dma6",
+			  "dma7",
+			  "dma8",
+			  "dma9",
+			  "dma10",
+			  "dma11",
+			  "dma12",
+			  "dma13",
+			  "dma14",
+			  "dma-shared-all";
 
 	#dma-cells = <1>;
 	brcm,dma-channel-mask = <0x7f35>;
 };
 
+
 DMA clients connected to the BCM2835 DMA controller must use the format
 described in the dma.txt file, using a two-cell specifier for each channel.
 

arch/arm/boot/dts/bcm283x.dtsi

@@ -47,9 +47,29 @@
 				     <1 24>,
 				     <1 25>,
 				     <1 26>,
+				     /* dma channel 11-14 share one irq */
 				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
 				     <1 28>;
-
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
 			#dma-cells = <1>;
 			brcm,dma-channel-mask = <0x7f35>;
 		};

drivers/dma/bcm2835-dma.c

@@ -46,6 +46,9 @@
 
 #include "virt-dma.h"
 
+#define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
+#define BCM2835_DMA_CHAN_NAME_SIZE 8
+
 struct bcm2835_dmadev {
 	struct dma_device ddev;
 	spinlock_t lock;
@@ -73,7 +76,6 @@ struct bcm2835_chan {
 	struct list_head node;
 
 	struct dma_slave_config	cfg;
-	bool cyclic;
 	unsigned int dreq;
 
 	int ch;
@@ -82,6 +84,9 @@ struct bcm2835_chan {
 
 	void __iomem *chan_base;
 	int irq_number;
+	unsigned int irq_flags;
+
+	bool is_lite_channel;
 };
 
 struct bcm2835_desc {
@@ -89,47 +94,104 @@ struct bcm2835_desc {
 	struct virt_dma_desc vd;
 	enum dma_transfer_direction dir;
 
-	struct bcm2835_cb_entry *cb_list;
-
 	unsigned int frames;
 	size_t size;
+
+	bool cyclic;
+
+	struct bcm2835_cb_entry cb_list[];
 };
 
 #define BCM2835_DMA_CS		0x00
 #define BCM2835_DMA_ADDR	0x04
+#define BCM2835_DMA_TI		0x08
 #define BCM2835_DMA_SOURCE_AD	0x0c
 #define BCM2835_DMA_DEST_AD	0x10
-#define BCM2835_DMA_NEXTCB	0x1C
+#define BCM2835_DMA_LEN		0x14
+#define BCM2835_DMA_STRIDE	0x18
+#define BCM2835_DMA_NEXTCB	0x1c
+#define BCM2835_DMA_DEBUG	0x20
 
 /* DMA CS Control and Status bits */
-#define BCM2835_DMA_ACTIVE	BIT(0)
-#define BCM2835_DMA_INT	BIT(2)
+#define BCM2835_DMA_ACTIVE	BIT(0)  /* activate the DMA */
+#define BCM2835_DMA_END		BIT(1)  /* current CB has ended */
+#define BCM2835_DMA_INT		BIT(2)  /* interrupt status */
+#define BCM2835_DMA_DREQ	BIT(3)  /* DREQ state */
 #define BCM2835_DMA_ISPAUSED	BIT(4)  /* Pause requested or not active */
 #define BCM2835_DMA_ISHELD	BIT(5)  /* Is held by DREQ flow control */
-#define BCM2835_DMA_ERR	BIT(8)
+#define BCM2835_DMA_WAITING_FOR_WRITES BIT(6) /* waiting for last
+					       * AXI-write to ack
+					       */
+#define BCM2835_DMA_ERR		BIT(8)
+#define BCM2835_DMA_PRIORITY(x) ((x & 15) << 16) /* AXI priority */
+#define BCM2835_DMA_PANIC_PRIORITY(x) ((x & 15) << 20) /* panic priority */
+/* current value of TI.BCM2835_DMA_WAIT_RESP */
+#define BCM2835_DMA_WAIT_FOR_WRITES BIT(28)
+#define BCM2835_DMA_DIS_DEBUG	BIT(29) /* disable debug pause signal */
 #define BCM2835_DMA_ABORT	BIT(30) /* Stop current CB, go to next, WO */
 #define BCM2835_DMA_RESET	BIT(31) /* WO, self clearing */
 
+/* Transfer information bits - also bcm2835_cb.info field */
 #define BCM2835_DMA_INT_EN	BIT(0)
+#define BCM2835_DMA_TDMODE	BIT(1) /* 2D-Mode */
+#define BCM2835_DMA_WAIT_RESP	BIT(3) /* wait for AXI-write to be acked */
 #define BCM2835_DMA_D_INC	BIT(4)
-#define BCM2835_DMA_D_DREQ	BIT(6)
+#define BCM2835_DMA_D_WIDTH	BIT(5) /* 128bit writes if set */
+#define BCM2835_DMA_D_DREQ	BIT(6) /* enable DREQ for destination */
+#define BCM2835_DMA_D_IGNORE	BIT(7) /* ignore destination writes */
 #define BCM2835_DMA_S_INC	BIT(8)
-#define BCM2835_DMA_S_DREQ	BIT(10)
-
-#define BCM2835_DMA_PER_MAP(x)	((x) << 16)
+#define BCM2835_DMA_S_WIDTH	BIT(9) /* 128bit writes if set */
+#define BCM2835_DMA_S_DREQ	BIT(10) /* enable SREQ for source */
+#define BCM2835_DMA_S_IGNORE	BIT(11) /* ignore source reads - read 0 */
+#define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12)
+#define BCM2835_DMA_PER_MAP(x)	((x & 31) << 16) /* REQ source */
+#define BCM2835_DMA_WAIT(x)	((x & 31) << 21) /* add DMA-wait cycles */
+#define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */
+
+/* debug register bits */
+#define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR	BIT(0)
+#define BCM2835_DMA_DEBUG_FIFO_ERR		BIT(1)
+#define BCM2835_DMA_DEBUG_READ_ERR		BIT(2)
+#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_SHIFT 4
+#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_BITS 4
+#define BCM2835_DMA_DEBUG_ID_SHIFT		16
+#define BCM2835_DMA_DEBUG_ID_BITS		9
+#define BCM2835_DMA_DEBUG_STATE_SHIFT		16
+#define BCM2835_DMA_DEBUG_STATE_BITS		9
+#define BCM2835_DMA_DEBUG_VERSION_SHIFT		25
+#define BCM2835_DMA_DEBUG_VERSION_BITS		3
+#define BCM2835_DMA_DEBUG_LITE			BIT(28)
+
+/* shared registers for all dma channels */
+#define BCM2835_DMA_INT_STATUS         0xfe0
+#define BCM2835_DMA_ENABLE             0xff0
 
 #define BCM2835_DMA_DATA_TYPE_S8	1
 #define BCM2835_DMA_DATA_TYPE_S16	2
 #define BCM2835_DMA_DATA_TYPE_S32	4
 #define BCM2835_DMA_DATA_TYPE_S128	16
 
-#define BCM2835_DMA_BULK_MASK	BIT(0)
-#define BCM2835_DMA_FIQ_MASK	(BIT(2) | BIT(3))
-
 /* Valid only for channels 0 - 14, 15 has its own base address */
 #define BCM2835_DMA_CHAN(n)	((n) << 8) /* Base address */
 #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
 
+/* the max dma length for different channels */
+#define MAX_DMA_LEN SZ_1G
+#define MAX_LITE_DMA_LEN (SZ_64K - 4)
+
+static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c)
+{
+	/* lite and normal channels have different max frame length */
+	return c->is_lite_channel ? MAX_LITE_DMA_LEN : MAX_DMA_LEN;
+}
+
+/* how many frames of max_len size do we need to transfer len bytes */
+static inline size_t bcm2835_dma_frames_for_length(size_t len,
+						   size_t max_len)
+{
+	return DIV_ROUND_UP(len, max_len);
+}
+
 static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d)
 {
 	return container_of(d, struct bcm2835_dmadev, ddev);
@@ -146,19 +208,209 @@ static inline struct bcm2835_desc *to_bcm2835_dma_desc(
 	return container_of(t, struct bcm2835_desc, vd.tx);
 }
 
-static void bcm2835_dma_desc_free(struct virt_dma_desc *vd)
+static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc)
 {
-	struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd);
-	int i;
+	size_t i;
 
 	for (i = 0; i < desc->frames; i++)
 		dma_pool_free(desc->c->cb_pool, desc->cb_list[i].cb,
 			      desc->cb_list[i].paddr);
 
-	kfree(desc->cb_list);
 	kfree(desc);
 }
 
+static void bcm2835_dma_desc_free(struct virt_dma_desc *vd)
+{
+	bcm2835_dma_free_cb_chain(
+		container_of(vd, struct bcm2835_desc, vd));
+}
+
+static void bcm2835_dma_create_cb_set_length(
+	struct bcm2835_chan *chan,
+	struct bcm2835_dma_cb *control_block,
+	size_t len,
+	size_t period_len,
+	size_t *total_len,
+	u32 finalextrainfo)
+{
+	size_t max_len = bcm2835_dma_max_frame_length(chan);
+
+	/* set the length taking lite-channel limitations into account */
+	control_block->length = min_t(u32, len, max_len);
+
+	/* finished if we have no period_length */
+	if (!period_len)
+		return;
+
+	/*
+	 * period_len means: that we need to generate
+	 * transfers that are terminating at every
+	 * multiple of period_len - this is typically
+	 * used to set the interrupt flag in info
+	 * which is required during cyclic transfers
+	 */
+
+	/* have we filled in period_length yet? */
+	if (*total_len + control_block->length < period_len)
+		return;
+
+	/* calculate the length that remains to reach period_length */
+	control_block->length = period_len - *total_len;
+
+	/* reset total_length for next period */
+	*total_len = 0;
+
+	/* add extrainfo bits in info */
+	control_block->info |= finalextrainfo;
+}
+
+static inline size_t bcm2835_dma_count_frames_for_sg(
+	struct bcm2835_chan *c,
+	struct scatterlist *sgl,
+	unsigned int sg_len)
+{
+	size_t frames = 0;
+	struct scatterlist *sgent;
+	unsigned int i;
+	size_t plength = bcm2835_dma_max_frame_length(c);
+
+	for_each_sg(sgl, sgent, sg_len, i)
+		frames += bcm2835_dma_frames_for_length(
+			sg_dma_len(sgent), plength);
+
+	return frames;
+}
+
+/**
+ * bcm2835_dma_create_cb_chain - create a control block and fills data in
+ *
+ * @chan:           the @dma_chan for which we run this
+ * @direction:      the direction in which we transfer
+ * @cyclic:         it is a cyclic transfer
+ * @info:           the default info bits to apply per controlblock
+ * @frames:         number of controlblocks to allocate
+ * @src:            the src address to assign (if the S_INC bit is set
+ *                  in @info, then it gets incremented)
+ * @dst:            the dst address to assign (if the D_INC bit is set
+ *                  in @info, then it gets incremented)
+ * @buf_len:        the full buffer length (may also be 0)
+ * @period_len:     the period length when to apply @finalextrainfo
+ *                  in addition to the last transfer
+ *                  this will also break some control-blocks early
+ * @finalextrainfo: additional bits in last controlblock
+ *                  (or when period_len is reached in case of cyclic)
+ * @gfp:            the GFP flag to use for allocation
+ */
+static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
+	struct dma_chan *chan, enum dma_transfer_direction direction,
+	bool cyclic, u32 info, u32 finalextrainfo, size_t frames,
+	dma_addr_t src, dma_addr_t dst, size_t buf_len,
+	size_t period_len, gfp_t gfp)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	size_t len = buf_len, total_len;
+	size_t frame;
+	struct bcm2835_desc *d;
+	struct bcm2835_cb_entry *cb_entry;
+	struct bcm2835_dma_cb *control_block;
+
+	if (!frames)
+		return NULL;
+
+	/* allocate and setup the descriptor. */
+	d = kzalloc(sizeof(*d) + frames * sizeof(struct bcm2835_cb_entry),
+		    gfp);
+	if (!d)
+		return NULL;
+
+	d->c = c;
+	d->dir = direction;
+	d->cyclic = cyclic;
+
+	/*
+	 * Iterate over all frames, create a control block
+	 * for each frame and link them together.
+	 */
+	for (frame = 0, total_len = 0; frame < frames; d->frames++, frame++) {
+		cb_entry = &d->cb_list[frame];
+		cb_entry->cb = dma_pool_alloc(c->cb_pool, gfp,
+					      &cb_entry->paddr);
+		if (!cb_entry->cb)
+			goto error_cb;
+
+		/* fill in the control block */
+		control_block = cb_entry->cb;
+		control_block->info = info;
+		control_block->src = src;
+		control_block->dst = dst;
+		control_block->stride = 0;
+		control_block->next = 0;
+		/* set up length in control_block if requested */
+		if (buf_len) {
+			/* calculate length honoring period_length */
+			bcm2835_dma_create_cb_set_length(
+				c, control_block,
+				len, period_len, &total_len,
+				cyclic ? finalextrainfo : 0);
+
+			/* calculate new remaining length */
+			len -= control_block->length;
+		}
+
+		/* link this the last controlblock */
+		if (frame)
+			d->cb_list[frame - 1].cb->next = cb_entry->paddr;
+
+		/* update src and dst and length */
+		if (src && (info & BCM2835_DMA_S_INC))
+			src += control_block->length;
+		if (dst && (info & BCM2835_DMA_D_INC))
+			dst += control_block->length;
+
+		/* Length of total transfer */
+		d->size += control_block->length;
+	}
+
+	/* the last frame requires extra flags */
+	d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
+
+	/* detect a size missmatch */
+	if (buf_len && (d->size != buf_len))
+		goto error_cb;
+
+	return d;
+error_cb:
+	bcm2835_dma_free_cb_chain(d);
+
+	return NULL;
+}
+
+static void bcm2835_dma_fill_cb_chain_with_sg(
+	struct dma_chan *chan,
+	enum dma_transfer_direction direction,
+	struct bcm2835_cb_entry *cb,
+	struct scatterlist *sgl,
+	unsigned int sg_len)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	size_t max_len = bcm2835_dma_max_frame_length(c);
+	unsigned int i, len;
+	dma_addr_t addr;
+	struct scatterlist *sgent;
+
+	for_each_sg(sgl, sgent, sg_len, i) {
+		for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent);
+		     len > 0;
+		     addr += cb->cb->length, len -= cb->cb->length, cb++) {
+			if (direction == DMA_DEV_TO_MEM)
+				cb->cb->dst = addr;
+			else
+				cb->cb->src = addr;
+			cb->cb->length = min(len, max_len);
+		}
+	}
+}
+
 static int bcm2835_dma_abort(void __iomem *chan_base)
 {
 	unsigned long cs;
@@ -218,6 +470,15 @@ static irqreturn_t bcm2835_dma_callback(int irq, void *data)
 	struct bcm2835_desc *d;
 	unsigned long flags;
 
+	/* check the shared interrupt */
+	if (c->irq_flags & IRQF_SHARED) {
+		/* check if the interrupt is enabled */
+		flags = readl(c->chan_base + BCM2835_DMA_CS);
+		/* if not set then we are not the reason for the irq */
+		if (!(flags & BCM2835_DMA_INT))
+			return IRQ_NONE;
+	}
+
 	spin_lock_irqsave(&c->vc.lock, flags);
 
 	/* Acknowledge interrupt */
@@ -226,12 +487,18 @@ static irqreturn_t bcm2835_dma_callback(int irq, void *data)
 	d = c->desc;
 
 	if (d) {
-		/* TODO Only works for cyclic DMA */
-		vchan_cyclic_callback(&d->vd);
-	}
+		if (d->cyclic) {
+			/* call the cyclic callback */
+			vchan_cyclic_callback(&d->vd);
 
-	/* Keep the DMA engine running */
-	writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
+			/* Keep the DMA engine running */
+			writel(BCM2835_DMA_ACTIVE,
+			       c->chan_base + BCM2835_DMA_CS);
+		} else {
+			vchan_cookie_complete(&c->desc->vd);
+			bcm2835_dma_start_desc(c);
+		}
+	}
 
 	spin_unlock_irqrestore(&c->vc.lock, flags);
 
@@ -252,8 +519,8 @@ static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan)
 		return -ENOMEM;
 	}
 
-	return request_irq(c->irq_number,
-			bcm2835_dma_callback, 0, "DMA IRQ", c);
+	return request_irq(c->irq_number, bcm2835_dma_callback,
+			   c->irq_flags, "DMA IRQ", c);
 }
 
 static void bcm2835_dma_free_chan_resources(struct dma_chan *chan)
@@ -339,8 +606,6 @@ static void bcm2835_dma_issue_pending(struct dma_chan *chan)
 	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
 	unsigned long flags;
 
-	c->cyclic = true; /* Nothing else is implemented */
-
 	spin_lock_irqsave(&c->vc.lock, flags);
 	if (vchan_issue_pending(&c->vc) && !c->desc)
 		bcm2835_dma_start_desc(c);
@@ -348,122 +613,160 @@ static void bcm2835_dma_issue_pending(struct dma_chan *chan)
 	spin_unlock_irqrestore(&c->vc.lock, flags);
 }
 
-static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
-	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
-	size_t period_len, enum dma_transfer_direction direction,
-	unsigned long flags)
+struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_memcpy(
+	struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
+	size_t len, unsigned long flags)
 {
 	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
-	enum dma_slave_buswidth dev_width;
 	struct bcm2835_desc *d;
-	dma_addr_t dev_addr;
-	unsigned int es, sync_type;
-	unsigned int frame;
-	int i;
+	u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC;
+	u32 extra = BCM2835_DMA_INT_EN | BCM2835_DMA_WAIT_RESP;
+	size_t max_len = bcm2835_dma_max_frame_length(c);
+	size_t frames;
+
+	/* if src, dst or len is not given return with an error */
+	if (!src || !dst || !len)
+		return NULL;
+
+	/* calculate number of frames */
+	frames = bcm2835_dma_frames_for_length(len, max_len);
+
+	/* allocate the CB chain - this also fills in the pointers */
+	d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false,
+					info, extra, frames,
+					src, dst, len, 0, GFP_KERNEL);
+	if (!d)
+		return NULL;
+
+	return vchan_tx_prep(&c->vc, &d->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *bcm2835_dma_prep_slave_sg(
+	struct dma_chan *chan,
+	struct scatterlist *sgl, unsigned int sg_len,
+	enum dma_transfer_direction direction,
+	unsigned long flags, void *context)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	struct bcm2835_desc *d;
+	dma_addr_t src = 0, dst = 0;
+	u32 info = BCM2835_DMA_WAIT_RESP;
+	u32 extra = BCM2835_DMA_INT_EN;
+	size_t frames;
 
-	/* Grab configuration */
 	if (!is_slave_direction(direction)) {
-		dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
+		dev_err(chan->device->dev,
+			"%s: bad direction?\n", __func__);
 		return NULL;
 	}
 
+	if (c->dreq != 0)
+		info |= BCM2835_DMA_PER_MAP(c->dreq);
+
 	if (direction == DMA_DEV_TO_MEM) {
-		dev_addr = c->cfg.src_addr;
-		dev_width = c->cfg.src_addr_width;
-		sync_type = BCM2835_DMA_S_DREQ;
+		if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
+			return NULL;
+		src = c->cfg.src_addr;
+		info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC;
 	} else {
-		dev_addr = c->cfg.dst_addr;
-		dev_width = c->cfg.dst_addr_width;
-		sync_type = BCM2835_DMA_D_DREQ;
+		if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
+			return NULL;
+		dst = c->cfg.dst_addr;
+		info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC;
 	}
 
-	/* Bus width translates to the element size (ES) */
-	switch (dev_width) {
-	case DMA_SLAVE_BUSWIDTH_4_BYTES:
-		es = BCM2835_DMA_DATA_TYPE_S32;
-		break;
-	default:
-		return NULL;
-	}
+	/* count frames in sg list */
+	frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len);
 
-	/* Now allocate and setup the descriptor. */
-	d = kzalloc(sizeof(*d), GFP_NOWAIT);
+	/* allocate the CB chain */
+	d = bcm2835_dma_create_cb_chain(chan, direction, false,
+					info, extra,
+					frames, src, dst, 0, 0,
+					GFP_KERNEL);
 	if (!d)
 		return NULL;
 
-	d->c = c;
-	d->dir = direction;
-	d->frames = buf_len / period_len;
+	/* fill in frames with scatterlist pointers */
+	bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list,
+					  sgl, sg_len);
 
-	d->cb_list = kcalloc(d->frames, sizeof(*d->cb_list), GFP_KERNEL);
-	if (!d->cb_list) {
-		kfree(d);
+	return vchan_tx_prep(&c->vc, &d->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
+	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+	size_t period_len, enum dma_transfer_direction direction,
+	unsigned long flags)
+{
+	struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+	struct bcm2835_desc *d;
+	dma_addr_t src, dst;
+	u32 info = BCM2835_DMA_WAIT_RESP;
+	u32 extra = BCM2835_DMA_INT_EN;
+	size_t max_len = bcm2835_dma_max_frame_length(c);
+	size_t frames;
+
+	/* Grab configuration */
+	if (!is_slave_direction(direction)) {
+		dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
 		return NULL;
 	}
-	/* Allocate memory for control blocks */
-	for (i = 0; i < d->frames; i++) {
-		struct bcm2835_cb_entry *cb_entry = &d->cb_list[i];
 
-		cb_entry->cb = dma_pool_zalloc(c->cb_pool, GFP_ATOMIC,
-					       &cb_entry->paddr);
-		if (!cb_entry->cb)
-			goto error_cb;
+	if (!buf_len) {
+		dev_err(chan->device->dev,
+			"%s: bad buffer length (= 0)\n", __func__);
+		return NULL;
 	}
 
 	/*
-	 * Iterate over all frames, create a control block
-	 * for each frame and link them together.
+	 * warn if buf_len is not a multiple of period_len - this may leed
+	 * to unexpected latencies for interrupts and thus audiable clicks
 	 */
-	for (frame = 0; frame < d->frames; frame++) {
-		struct bcm2835_dma_cb *control_block = d->cb_list[frame].cb;
-
-		/* Setup adresses */
-		if (d->dir == DMA_DEV_TO_MEM) {
-			control_block->info = BCM2835_DMA_D_INC;
-			control_block->src = dev_addr;
-			control_block->dst = buf_addr + frame * period_len;
-		} else {
-			control_block->info = BCM2835_DMA_S_INC;
-			control_block->src = buf_addr + frame * period_len;
-			control_block->dst = dev_addr;
-		}
+	if (buf_len % period_len)
+		dev_warn_once(chan->device->dev,
+			      "%s: buffer_length (%zd) is not a multiple of period_len (%zd)\n",
+			      __func__, buf_len, period_len);
 
-		/* Enable interrupt */
-		control_block->info |= BCM2835_DMA_INT_EN;
+	/* Setup DREQ channel */
+	if (c->dreq != 0)
+		info |= BCM2835_DMA_PER_MAP(c->dreq);
 
-		/* Setup synchronization */
-		if (sync_type != 0)
-			control_block->info |= sync_type;
+	if (direction == DMA_DEV_TO_MEM) {
+		if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
+			return NULL;
+		src = c->cfg.src_addr;
+		dst = buf_addr;
+		info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC;
+	} else {
+		if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
+			return NULL;
+		dst = c->cfg.dst_addr;
+		src = buf_addr;
+		info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC;
+	}
 
-		/* Setup DREQ channel */
-		if (c->dreq != 0)
-			control_block->info |=
-				BCM2835_DMA_PER_MAP(c->dreq);
+	/* calculate number of frames */
+	frames = /* number of periods */
+		 DIV_ROUND_UP(buf_len, period_len) *
+		 /* number of frames per period */
+		 bcm2835_dma_frames_for_length(period_len, max_len);
 
-		/* Length of a frame */
-		control_block->length = period_len;
-		d->size += control_block->length;
+	/*
+	 * allocate the CB chain
+	 * note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine
+	 * implementation calls prep_dma_cyclic with interrupts disabled.
+	 */
+	d = bcm2835_dma_create_cb_chain(chan, direction, true,
+					info, extra,
+					frames, src, dst, buf_len,
+					period_len, GFP_NOWAIT);
+	if (!d)
+		return NULL;
 
-		/*
-		 * Next block is the next frame.
-		 * This DMA engine driver currently only supports cyclic DMA.
-		 * Therefore, wrap around at number of frames.
-		 */
-		control_block->next = d->cb_list[((frame + 1) % d->frames)].paddr;
-	}
+	/* wrap around into a loop */
+	d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr;
 
 	return vchan_tx_prep(&c->vc, &d->vd, flags);
-error_cb:
-	i--;
-	for (; i >= 0; i--) {
-		struct bcm2835_cb_entry *cb_entry = &d->cb_list[i];
-
-		dma_pool_free(c->cb_pool, cb_entry->cb, cb_entry->paddr);
-	}
-
-	kfree(d->cb_list);
-	kfree(d);
-	return NULL;
 }
 
 static int bcm2835_dma_slave_config(struct dma_chan *chan,
@@ -529,7 +832,8 @@ static int bcm2835_dma_terminate_all(struct dma_chan *chan)
 	return 0;
 }
 
-static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq)
+static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id,
+				 int irq, unsigned int irq_flags)
 {
 	struct bcm2835_chan *c;
 
@@ -544,6 +848,12 @@ static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq)
 	c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id);
 	c->ch = chan_id;
 	c->irq_number = irq;
+	c->irq_flags = irq_flags;
+
+	/* check in DEBUG register if this is a LITE channel */
+	if (readl(c->chan_base + BCM2835_DMA_DEBUG) &
+		BCM2835_DMA_DEBUG_LITE)
+		c->is_lite_channel = true;
 
 	return 0;
 }
@@ -587,9 +897,11 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *base;
 	int rc;
-	int i;
-	int irq;
+	int i, j;
+	int irq[BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1];
+	int irq_flags;
 	uint32_t chans_available;
+	char chan_name[BCM2835_DMA_CHAN_NAME_SIZE];
 
 	if (!pdev->dev.dma_mask)
 		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
@@ -615,16 +927,22 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
 	dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
 	dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
+	dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
+	dma_cap_set(DMA_MEMCPY, od->ddev.cap_mask);
 	od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources;
 	od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
 	od->ddev.device_tx_status = bcm2835_dma_tx_status;
 	od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
 	od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
+	od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg;
+	od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy;
 	od->ddev.device_config = bcm2835_dma_slave_config;
 	od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
 	od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
 	od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
-	od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) |
+			      BIT(DMA_MEM_TO_MEM);
+	od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 	od->ddev.dev = &pdev->dev;
 	INIT_LIST_HEAD(&od->ddev.channels);
 	spin_lock_init(&od->lock);
@@ -640,22 +958,48 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
 		goto err_no_dma;
 	}
 
-	/*
-	 * Do not use the FIQ and BULK channels,
-	 * because they are used by the GPU.
-	 */
-	chans_available &= ~(BCM2835_DMA_FIQ_MASK | BCM2835_DMA_BULK_MASK);
+	/* get irqs for each channel that we support */
+	for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+		/* skip masked out channels */
+		if (!(chans_available & (1 << i))) {
+			irq[i] = -1;
+			continue;
+		}
 
-	for (i = 0; i < pdev->num_resources; i++) {
-		irq = platform_get_irq(pdev, i);
-		if (irq < 0)
-			break;
+		/* get the named irq */
+		snprintf(chan_name, sizeof(chan_name), "dma%i", i);
+		irq[i] = platform_get_irq_byname(pdev, chan_name);
+		if (irq[i] >= 0)
+			continue;
 
-		if (chans_available & (1 << i)) {
-			rc = bcm2835_dma_chan_init(od, i, irq);
-			if (rc)
-				goto err_no_dma;
-		}
+		/* legacy device tree case handling */
+		dev_warn_once(&pdev->dev,
+			      "missing interrupt-names property in device tree - legacy interpretation is used\n");
+		/*
+		 * in case of channel >= 11
+		 * use the 11th interrupt and that is shared
+		 */
+		irq[i] = platform_get_irq(pdev, i < 11 ? i : 11);
+	}
+
+	/* get irqs for each channel */
+	for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+		/* skip channels without irq */
+		if (irq[i] < 0)
+			continue;
+
+		/* check if there are other channels that also use this irq */
+		irq_flags = 0;
+		for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++)
+			if ((i != j) && (irq[j] == irq[i])) {
+				irq_flags = IRQF_SHARED;
+				break;
+			}
+
+		/* initialize the channel */
+		rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags);
+		if (rc)
+			goto err_no_dma;
 	}
 
 	dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i);