xhci: Set SCT field for Set TR dequeue on streams

Nec XHCI controllers don't seem to care, but without this Intel XHCI
controllers reject Set TR dequeue commands with a COMP_TRB_ERR, leading
to the following warning:

WARN Set TR Deq Ptr cmd invalid because of stream ID configuration

And very shortly after this the system completely freezes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

drivers/usb/host/xhci-ring.c

@@ -4073,6 +4073,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
 	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
 	u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
+	u32 trb_sct = 0;
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
 	struct xhci_virt_ep *ep;
 
@@ -4091,7 +4092,9 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	}
 	ep->queued_deq_seg = deq_seg;
 	ep->queued_deq_ptr = deq_ptr;
-	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+	if (stream_id)
+		trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
+	return queue_command(xhci, lower_32_bits(addr) | trb_sct | cycle_state,
 			upper_32_bits(addr), trb_stream_id,
 			trb_slot_id | trb_ep_index | type, false);
 }

drivers/usb/host/xhci.h

@@ -1118,9 +1118,10 @@ enum xhci_setup_dev {
 #define TRB_TO_SUSPEND_PORT(p)		(((p) & (1 << 23)) >> 23)
 #define LAST_EP_INDEX			30
 
-/* Set TR Dequeue Pointer command TRB fields */
+/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
 #define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
 #define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
+#define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
 
 
 /* Port Status Change Event TRB fields */