Merge tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.17. Rough overview:

   (1) generic platform: Add support for Microsemi Ocelot SoCs

   (2) crypto: Add CRC32 and CRC32C HW acceleration module

   (3) Various cleanups and misc improvements

  More detailed summary:

  Miscellaneous:
   - hang more efficiently on halt/powerdown/restart
   - pm-cps: Block system suspend when a JTAG probe is present
   - expand make help text for generic defconfigs
   - refactor handling of legacy defconfigs
   - determine the entry point from the ELF file header to fix microMIPS
     for certain toolchains
   - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code

  Minor cleanups:
   - DTS: boston/ci20: Unit name cleanups and correction
   - kdump: Make the default for PHYSICAL_START always 64-bit
   - constify gpio_led in Alchemy, AR7, and TXX9
   - silence a couple of W=1 warnings
   - remove duplicate includes

  Platform support:
  Generic platform:
   - add support for Microsemi Ocelot
   - dt-bindings: Add vendor prefix for Microsemi Corporation
   - dt-bindings: Add bindings for Microsemi SoCs
   - add ocelot SoC & PCB123 board DTS files
   - MAINTAINERS: Add entry for Microsemi MIPS SoCs
   - enable crc32-mips on r6 configs

  ath79:
   - fix AR724X_PLL_REG_PCIE_CONFIG offset

  BCM47xx:
   - firmware: Use mac_pton() for MAC address parsing
   - add Luxul XAP1500/XWR1750 WiFi LEDs
   - use standard reset button for Luxul XWR-1750

  BMIPS:
   - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
   - add STB PM, wake-up timer, watchdog DT nodes

  Octeon:
   - drop '.' after newlines in printk calls

  ralink:
   - pci-mt7621: Enable PCIe on MT7688"

* tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits)
  MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750
  MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
  MIPS: Make the default for PHYSICAL_START always 64-bit
  MIPS: Use the entry point from the ELF file header
  MAINTAINERS: Add entry for Microsemi MIPS SoCs
  MIPS: generic: Add support for Microsemi Ocelot
  MIPS: mscc: Add ocelot PCB123 device tree
  MIPS: mscc: Add ocelot dtsi
  dt-bindings: mips: Add bindings for Microsemi SoCs
  dt-bindings: Add vendor prefix for Microsemi Corporation
  MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
  MIPS: pci-mt7620: Enable PCIe on MT7688
  MIPS: pm-cps: Block system suspend when a JTAG probe is present
  MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
  MIPS: Hang more efficiently on halt/powerdown/restart
  FIRMWARE: bcm47xx_nvram: Replace mac address parsing
  MIPS: BMIPS: Add Broadcom STB watchdog nodes
  ...

Documentation/devicetree/bindings/mips/mscc.txt

@@ -0,0 +1,43 @@
+* Microsemi MIPS CPUs
+
+Boards with a SoC of the Microsemi MIPS family shall have the following
+properties:
+
+Required properties:
+- compatible: "mscc,ocelot"
+
+
+* Other peripherals:
+
+o CPU chip regs:
+
+The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous
+functionalities: chip ID, general purpose register for software use, reset
+controller, hardware status and configuration, efuses.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@71070000 {
+		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
+		reg = <0x71070000 0x1c>;
+	};
+
+
+o CPU system control:
+
+The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
+the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
+endianness, CPU bus control, CPU status.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@70000000 {
+		compatible = "mscc,ocelot-cpu-syscon", "syscon";
+		reg = <0x70000000 0x2c>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -225,6 +225,7 @@ motorola	Motorola, Inc.
 moxa	Moxa Inc.
 mpl	MPL AG
 mqmaker	mqmaker Inc.
+mscc	Microsemi Corporation
 msi	Micro-Star International Co. Ltd.
 mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
 multi-inno	Multi-Inno Technology Co.,Ltd

MAINTAINERS

@@ -9230,6 +9230,15 @@ S:	Maintained
 F:	drivers/usb/misc/usb251xb.c
 F:	Documentation/devicetree/bindings/usb/usb251xb.txt
 
+MICROSEMI MIPS SOCS
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
+L:	linux-mips@linux-mips.org
+S:	Maintained
+F:	arch/mips/generic/board-ocelot.c
+F:	arch/mips/configs/generic/board-ocelot.config
+F:	arch/mips/boot/dts/mscc/
+F:	Documentation/devicetree/bindings/mips/mscc.txt
+
 MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
 M:	Don Brace <don.brace@microsemi.com>
 L:	esc.storagedev@microsemi.com

arch/mips/Kconfig

@@ -2029,6 +2029,7 @@ config CPU_MIPSR6
 	select CPU_HAS_RIXI
 	select HAVE_ARCH_BITREVERSE
 	select MIPS_ASID_BITS_VARIABLE
+	select MIPS_CRC_SUPPORT
 	select MIPS_SPRAM
 
 config EVA
@@ -2502,6 +2503,9 @@ config MIPS_ASID_BITS
 config MIPS_ASID_BITS_VARIABLE
 	bool
 
+config MIPS_CRC_SUPPORT
+	bool
+
 #
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
@@ -2850,8 +2854,7 @@ config CRASH_DUMP
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded"
-	default "0xffffffff84000000" if 64BIT
-	default "0x84000000" if 32BIT
+	default "0xffffffff84000000"
 	depends on CRASH_DUMP
 	help
 	  This gives the CKSEG0 or KSEG0 address where the kernel is loaded.

arch/mips/Makefile

@@ -222,6 +222,8 @@ xpa-cflags-y				:= $(mips-cflags)
 xpa-cflags-$(micromips-ase)		+= -mmicromips -Wa$(comma)-fatal-warnings
 toolchain-xpa				:= $(call cc-option-yn,$(xpa-cflags-y) -mxpa)
 cflags-$(toolchain-xpa)			+= -DTOOLCHAIN_SUPPORTS_XPA
+toolchain-crc				:= $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mcrc)
+cflags-$(toolchain-crc)			+= -DTOOLCHAIN_SUPPORTS_CRC
 
 #
 # Firmware support
@@ -249,20 +251,12 @@ ifdef CONFIG_PHYSICAL_START
 load-y					= $(CONFIG_PHYSICAL_START)
 endif
 
-entry-noisa-y				= 0x$(shell $(NM) vmlinux 2>/dev/null \
-					| grep "\bkernel_entry\b" | cut -f1 -d \ )
-ifdef CONFIG_CPU_MICROMIPS
-  #
-  # Set the ISA bit, since the kernel_entry symbol in the ELF will have it
-  # clear which would lead to images containing addresses which bootloaders may
-  # jump to as MIPS32 code.
-  #
-  entry-y = $(patsubst %0,%1,$(patsubst %2,%3,$(patsubst %4,%5, \
-              $(patsubst %6,%7,$(patsubst %8,%9,$(patsubst %a,%b, \
-              $(patsubst %c,%d,$(patsubst %e,%f,$(entry-noisa-y)))))))))
-else
-  entry-y = $(entry-noisa-y)
-endif
+# Sign-extend the entry point to 64 bits if retrieved as a 32-bit number.
+entry-y		= $(shell $(OBJDUMP) -f vmlinux 2>/dev/null \
+			| sed -n '/^start address / { \
+				s/^.* //; \
+				s/0x\([0-7].......\)$$/0x00000000\1/; \
+				s/0x\(........\)$$/0xffffffff\1/; p }')
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
@@ -330,6 +324,7 @@ libs-y			+= arch/mips/math-emu/
 # See arch/mips/Kbuild for content of core part of the kernel
 core-y += arch/mips/
 
+drivers-$(CONFIG_MIPS_CRC_SUPPORT) += arch/mips/crypto/
 drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
 # suspend and hibernation support
@@ -473,6 +468,21 @@ define archhelp
 	echo
 	echo '  {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
 	echo
+	echo '  Where BOARDS is some subset of the following:'
+	for board in $(sort $(BOARDS)); do echo "    $${board}"; done
+	echo
+	echo '  Specifically the following generic default configurations are'
+	echo '  supported:'
+	echo
+	$(foreach cfg,$(generic_defconfigs),
+	  printf "  %-24s - Build generic kernel for $(call describe_generic_defconfig,$(cfg))\n" $(cfg);)
+	echo
+	echo '  The following legacy default configurations have been converted to'
+	echo '  generic and can still be used:'
+	echo
+	$(foreach cfg,$(sort $(legacy_defconfigs)),
+	  printf "  %-24s - Build $($(cfg)-y)\n" $(cfg);)
+	echo
 	echo '  Otherwise, the following default configurations are available:'
 endef
 
@@ -507,6 +517,10 @@ endef
 $(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
 $(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
 
+define describe_generic_defconfig
+$(subst 32r,MIPS32 r,$(subst 64r,MIPS64 r,$(subst el, little endian,$(patsubst %_defconfig,%,$(1)))))
+endef
+
 .PHONY: $(generic_defconfigs)
 $(generic_defconfigs):
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
@@ -543,14 +557,18 @@ generic_defconfig:
 # now that the boards have been converted to use the generic kernel they are
 # wrappers around the generic rules above.
 #
-.PHONY: sead3_defconfig
-sead3_defconfig:
-	$(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=sead-3
+legacy_defconfigs		+= ocelot_defconfig
+ocelot_defconfig-y		:= 32r2el_defconfig BOARDS=ocelot
+
+legacy_defconfigs		+= sead3_defconfig
+sead3_defconfig-y		:= 32r2el_defconfig BOARDS=sead-3
+
+legacy_defconfigs		+= sead3micro_defconfig
+sead3micro_defconfig-y		:= micro32r2el_defconfig BOARDS=sead-3
 
-.PHONY: sead3micro_defconfig
-sead3micro_defconfig:
-	$(Q)$(MAKE) -f $(srctree)/Makefile micro32r2el_defconfig BOARDS=sead-3
+legacy_defconfigs		+= xilfpga_defconfig
+xilfpga_defconfig-y		:= 32r2el_defconfig BOARDS=xilfpga
 
-.PHONY: xilfpga_defconfig
-xilfpga_defconfig:
-	$(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=xilfpga
+.PHONY: $(legacy_defconfigs)
+$(legacy_defconfigs):
+	$(Q)$(MAKE) -f $(srctree)/Makefile $($@-y)

arch/mips/alchemy/board-gpr.c

@@ -190,7 +190,7 @@ static struct platform_device gpr_mtd_device = {
 /*
  * LEDs
  */
-static struct gpio_led gpr_gpio_leds[] = {
+static const struct gpio_led gpr_gpio_leds[] = {
 	{	/* green */
 		.name			= "gpr:green",
 		.gpio			= 4,

arch/mips/alchemy/board-mtx1.c

@@ -145,7 +145,7 @@ static struct platform_device mtx1_wdt = {
 	.resource = mtx1_wdt_res,
 };
 
-static struct gpio_led default_leds[] = {
+static const struct gpio_led default_leds[] = {
 	{
 		.name	= "mtx1:green",
 		.gpio = 211,

arch/mips/ar7/platform.c

@@ -346,7 +346,7 @@ static struct platform_device ar7_udc = {
 /*****************************************************************************
  * LEDs
  ****************************************************************************/
-static struct gpio_led default_leds[] = {
+static const struct gpio_led default_leds[] = {
 	{
 		.name			= "status",
 		.gpio			= 8,
@@ -354,12 +354,12 @@ static struct gpio_led default_leds[] = {
 	},
 };
 
-static struct gpio_led titan_leds[] = {
+static const struct gpio_led titan_leds[] = {
 	{ .name = "status", .gpio = 8, .active_low = 1, },
 	{ .name = "wifi", .gpio = 13, .active_low = 1, },
 };
 
-static struct gpio_led dsl502t_leds[] = {
+static const struct gpio_led dsl502t_leds[] = {
 	{
 		.name			= "status",
 		.gpio			= 9,
@@ -377,7 +377,7 @@ static struct gpio_led dsl502t_leds[] = {
 	},
 };
 
-static struct gpio_led dg834g_leds[] = {
+static const struct gpio_led dg834g_leds[] = {
 	{
 		.name			= "ppp",
 		.gpio			= 6,
@@ -406,7 +406,7 @@ static struct gpio_led dg834g_leds[] = {
 	},
 };
 
-static struct gpio_led fb_sl_leds[] = {
+static const struct gpio_led fb_sl_leds[] = {
 	{
 		.name			= "1",
 		.gpio			= 7,
@@ -433,7 +433,7 @@ static struct gpio_led fb_sl_leds[] = {
 	},
 };
 
-static struct gpio_led fb_fon_leds[] = {
+static const struct gpio_led fb_fon_leds[] = {
 	{
 		.name			= "1",
 		.gpio			= 8,
@@ -459,7 +459,7 @@ static struct gpio_led fb_fon_leds[] = {
 	},
 };
 
-static struct gpio_led gt701_leds[] = {
+static const struct gpio_led gt701_leds[] = {
 	{
 		.name			= "inet:green",
 		.gpio			= 13,

arch/mips/bcm47xx/buttons.c

@@ -355,7 +355,7 @@ bcm47xx_buttons_luxul_xwr_600_v1[] = {
 
 static const struct gpio_keys_button
 bcm47xx_buttons_luxul_xwr_1750_v1[] = {
-	BCM47XX_GPIO_KEY(14, BTN_TASK),
+	BCM47XX_GPIO_KEY(14, KEY_RESTART),
 };
 
 /* Microsoft */

arch/mips/bcm47xx/leds.c

@@ -408,6 +408,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initconst = {
 	BCM47XX_GPIO_LED_TRIGGER(13, "green", "status", 1, "timer"),
 };
 
+static const struct gpio_led
+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
+	BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
 	BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -435,6 +441,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initconst = {
 	BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+static const struct gpio_led
+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
+	BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 /* Microsoft */
 
 static const struct gpio_led
@@ -528,6 +539,12 @@ static struct gpio_led_platform_data bcm47xx_leds_pdata;
 	bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);		\
 } while (0)
 
+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
+#define bcm47xx_set_pdata_extra(dev_leds) do {				\
+	bcm47xx_leds_pdata_extra.leds = dev_leds;			\
+	bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds);	\
+} while (0)
+
 void __init bcm47xx_leds_register(void)
 {
 	enum bcm47xx_board board = bcm47xx_board_get();
@@ -705,6 +722,7 @@ void __init bcm47xx_leds_register(void)
 		break;
 	case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
+		bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
 		break;
 	case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
@@ -717,6 +735,7 @@ void __init bcm47xx_leds_register(void)
 		break;
 	case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
+		bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
 		break;
 
 	case BCM47XX_BOARD_MICROSOFT_MN700:
@@ -760,4 +779,6 @@ void __init bcm47xx_leds_register(void)
 	}
 
 	gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+	if (bcm47xx_leds_pdata_extra.num_leds)
+		gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
 }

arch/mips/boot/dts/Makefile

@@ -4,6 +4,7 @@ subdir-y	+= cavium-octeon
 subdir-y	+= img
 subdir-y	+= ingenic
 subdir-y	+= lantiq
+subdir-y	+= mscc
 subdir-y	+= mti
 subdir-y	+= netlogic
 subdir-y	+= ni

arch/mips/boot/dts/brcm/bcm7125.dtsi

@@ -198,6 +198,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x80>;

arch/mips/boot/dts/brcm/bcm7346.dtsi

@@ -233,6 +233,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
@@ -243,6 +250,17 @@
 			brcm,irq-can-wake;
 		};
 
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@4067c0 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x4067c0 0x40>;
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x60>;
@@ -483,5 +501,49 @@
 			interrupt-names = "mspi_done";
 			status = "disabled";
 		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7358.dtsi

@@ -217,6 +217,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408240 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408240 0x30>;
@@ -362,5 +369,15 @@
 			interrupt-names = "mspi_done";
 			status = "disabled";
 		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7360.dtsi

@@ -209,6 +209,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
@@ -219,6 +226,17 @@
 			brcm,irq-can-wake;
 		};
 
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@406680 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x406680 0x40>;
+		};
+
 		upg_gio: gpio@406500 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406500 0xa0>;
@@ -402,5 +420,49 @@
 			interrupt-names = "mspi_done";
 			status = "disabled";
 		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7362.dtsi

@@ -205,6 +205,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
@@ -215,6 +222,17 @@
 			brcm,irq-can-wake;
 		};
 
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@406680 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x406680 0x40>;
+		};
+
 		upg_gio: gpio@406500 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406500 0xa0>;
@@ -398,5 +416,49 @@
 			interrupt-names = "mspi_done";
 			status = "disabled";
 		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7420.dtsi

@@ -214,6 +214,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x80>;

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -232,6 +232,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
@@ -242,6 +249,17 @@
 			brcm,irq-can-wake;
 		};
 
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@4067c0 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x4067c0 0x40>;
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x80>;
@@ -494,5 +512,76 @@
 			interrupt-names = "mspi_done";
 			status = "disabled";
 		};
+
+		waketimer: waketimer@409580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x409580 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0x1a000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+
+		memory-controller@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x10000 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -247,6 +247,13 @@
 			status = "disabled";
 		};
 
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
 		aon_pm_l2_intc: interrupt-controller@408440 {
 			compatible = "brcm,l2-intc";
 			reg = <0x408440 0x30>;
@@ -257,6 +264,17 @@
 			brcm,irq-can-wake;
 		};
 
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@4067c0 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x4067c0 0x40>;
+		};
+
 		upg_gio: gpio@406700 {
 			compatible = "brcm,brcmstb-gpio";
 			reg = <0x406700 0x80>;
@@ -509,5 +527,76 @@
 			interrupt-names = "mspi_done";
 			status = "disabled";
 		};
+
+		waketimer: waketimer@409580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x409580 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0x1a000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+
+		memory-controller@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x10000 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm97125cbmb.dts

@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";

arch/mips/boot/dts/brcm/bcm97346dbsmb.dts

@@ -59,6 +59,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -114,3 +118,7 @@
 &mspi {
 	status = "okay";
 };
+
+&waketimer {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97358svmb.dts

@@ -55,6 +55,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -106,3 +110,7 @@
 &mspi {
 	status = "okay";
 };
+
+&waketimer {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97360svmb.dts

@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -109,3 +113,7 @@
 &mspi {
 	status = "okay";
 };
+
+&waketimer {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97362svmb.dts

@@ -47,6 +47,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -78,3 +82,7 @@
 &mspi {
 	status = "okay";
 };
+
+&waketimer {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97420c.dts

@@ -60,6 +60,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";

arch/mips/boot/dts/brcm/bcm97425svmb.dts

@@ -61,6 +61,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -144,3 +148,7 @@
 &mspi {
 	status = "okay";
 };
+
+&waketimer {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97435svmb.dts

@@ -61,6 +61,10 @@
 	status = "okay";
 };
 
+&watchdog {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -120,3 +124,7 @@
 &mspi {
 	status = "okay";
 };
+
+&waketimer {
+	status = "okay";
+};

arch/mips/boot/dts/img/boston.dts

@@ -157,7 +157,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					rtc@0x68 {
+					rtc@68 {
 						compatible = "st,m41t81s";
 						reg = <0x68>;
 					};

arch/mips/boot/dts/ingenic/ci20.dts

@@ -110,22 +110,22 @@
 					reg = <0x0 0x0 0x0 0x800000>;
 				};
 
-				partition@0x800000 {
+				partition@800000 {
 					label = "u-boot";
 					reg = <0x0 0x800000 0x0 0x200000>;
 				};
 
-				partition@0xa00000 {
+				partition@a00000 {
 					label = "u-boot-env";
 					reg = <0x0 0xa00000 0x0 0x200000>;
 				};
 
-				partition@0xc00000 {
+				partition@c00000 {
 					label = "boot";
 					reg = <0x0 0xc00000 0x0 0x4000000>;
 				};
 
-				partition@0x8c00000 {
+				partition@4c00000 {
 					label = "system";
 					reg = <0x0 0x4c00000 0x1 0xfb400000>;
 				};

arch/mips/boot/dts/mscc/Makefile

@@ -0,0 +1,3 @@
+dtb-$(CONFIG_LEGACY_BOARD_OCELOT)	+= ocelot_pcb123.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))

arch/mips/boot/dts/mscc/ocelot.dtsi

@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,ocelot";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb@70000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x70000000 0x2000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@0 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x0 0x2c>;
+		};
+
+		intc: interrupt-controller@70 {
+			compatible = "mscc,ocelot-icpu-intr";
+			reg = <0x70 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		uart2: serial@100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		reset@1070008 {
+			compatible = "mscc,ocelot-chip-reset";
+			reg = <0x1070008 0x4>;
+		};
+
+		gpio: pinctrl@1070034 {
+			compatible = "mscc,ocelot-pinctrl";
+			reg = <0x1070034 0x68>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 22>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_6", "GPIO_7";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_12", "GPIO_13";
+				function = "uart2";
+			};
+		};
+	};
+};

arch/mips/boot/dts/mscc/ocelot_pcb123.dts

@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};

arch/mips/cavium-octeon/octeon-irq.c

@@ -2271,7 +2271,7 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 
 	parent_irq = irq_of_parse_and_map(ciu_node, 0);
 	if (!parent_irq) {
-		pr_err("ERROR: Couldn't acquire parent_irq for %s\n.",
+		pr_err("ERROR: Couldn't acquire parent_irq for %s\n",
 			ciu_node->name);
 		return -EINVAL;
 	}
@@ -2283,7 +2283,7 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 
 	addr = of_get_address(ciu_node, 0, NULL, NULL);
 	if (!addr) {
-		pr_err("ERROR: Couldn't acquire reg(0) %s\n.", ciu_node->name);
+		pr_err("ERROR: Couldn't acquire reg(0) %s\n", ciu_node->name);
 		return -EINVAL;
 	}
 	host_data->raw_reg = (u64)phys_to_virt(
@@ -2291,7 +2291,7 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 
 	addr = of_get_address(ciu_node, 1, NULL, NULL);
 	if (!addr) {
-		pr_err("ERROR: Couldn't acquire reg(1) %s\n.", ciu_node->name);
+		pr_err("ERROR: Couldn't acquire reg(1) %s\n", ciu_node->name);
 		return -EINVAL;
 	}
 	host_data->en_reg = (u64)phys_to_virt(
@@ -2299,7 +2299,7 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 
 	r = of_property_read_u32(ciu_node, "cavium,max-bits", &val);
 	if (r) {
-		pr_err("ERROR: Couldn't read cavium,max-bits from %s\n.",
+		pr_err("ERROR: Couldn't read cavium,max-bits from %s\n",
 			ciu_node->name);
 		return r;
 	}
@@ -2309,7 +2309,7 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 					   &octeon_irq_domain_cib_ops,
 					   host_data);
 	if (!cib_domain) {
-		pr_err("ERROR: Couldn't irq_domain_add_linear()\n.");
+		pr_err("ERROR: Couldn't irq_domain_add_linear()\n");
 		return -ENOMEM;
 	}
 

arch/mips/configs/bmips_stb_defconfig

@@ -72,6 +72,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_SOC_BRCMSTB=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y

arch/mips/configs/generic/32r6.config

@@ -1,2 +1,4 @@
 CONFIG_CPU_MIPS32_R6=y
 CONFIG_HIGHMEM=y
+
+CONFIG_CRYPTO_CRC32_MIPS=y

arch/mips/configs/generic/64r6.config

@@ -2,3 +2,5 @@ CONFIG_CPU_MIPS64_R6=y
 CONFIG_64BIT=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
+
+CONFIG_CRYPTO_CRC32_MIPS=y

arch/mips/configs/generic/board-ocelot.config

@@ -0,0 +1,35 @@
+# require CONFIG_CPU_MIPS32_R2=y
+
+CONFIG_LEGACY_BOARD_OCELOT=y
+
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_GPIO_SYSFS=y
+
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_SPIDEV=y
+
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_OCELOT_RESET=y
+
+CONFIG_MAGIC_SYSRQ=y

arch/mips/crypto/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for MIPS crypto files..
+#
+
+obj-$(CONFIG_CRYPTO_CRC32_MIPS) += crc32-mips.o

arch/mips/crypto/crc32-mips.c

@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * crc32-mips.c - CRC32 and CRC32C using optional MIPSr6 instructions
+ *
+ * Module based on arm64/crypto/crc32-arm.c
+ *
+ * Copyright (C) 2014 Linaro Ltd <yazen.ghannam@linaro.org>
+ * Copyright (C) 2018 MIPS Tech, LLC
+ */
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/cpufeature.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <asm/mipsregs.h>
+
+#include <crypto/internal/hash.h>
+
+enum crc_op_size {
+	b, h, w, d,
+};
+
+enum crc_type {
+	crc32,
+	crc32c,
+};
+
+#ifndef TOOLCHAIN_SUPPORTS_CRC
+#define _ASM_MACRO_CRC32(OP, SZ, TYPE)					  \
+_ASM_MACRO_3R(OP, rt, rs, rt2,						  \
+	".ifnc	\\rt, \\rt2\n\t"					  \
+	".error	\"invalid operands \\\"" #OP " \\rt,\\rs,\\rt2\\\"\"\n\t" \
+	".endif\n\t"							  \
+	_ASM_INSN_IF_MIPS(0x7c00000f | (__rt << 16) | (__rs << 21) |	  \
+			  ((SZ) <<  6) | ((TYPE) << 8))			  \
+	_ASM_INSN32_IF_MM(0x00000030 | (__rs << 16) | (__rt << 21) |	  \
+			  ((SZ) << 14) | ((TYPE) << 3)))
+_ASM_MACRO_CRC32(crc32b,  0, 0);
+_ASM_MACRO_CRC32(crc32h,  1, 0);
+_ASM_MACRO_CRC32(crc32w,  2, 0);
+_ASM_MACRO_CRC32(crc32d,  3, 0);
+_ASM_MACRO_CRC32(crc32cb, 0, 1);
+_ASM_MACRO_CRC32(crc32ch, 1, 1);
+_ASM_MACRO_CRC32(crc32cw, 2, 1);
+_ASM_MACRO_CRC32(crc32cd, 3, 1);
+#define _ASM_SET_CRC ""
+#else /* !TOOLCHAIN_SUPPORTS_CRC */
+#define _ASM_SET_CRC ".set\tcrc\n\t"
+#endif
+
+#define _CRC32(crc, value, size, type)		\
+do {						\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		_ASM_SET_CRC			\
+		#type #size "	%0, %1, %0\n\t"	\
+		".set	pop"			\
+		: "+r" (crc)			\
+		: "r" (value));			\
+} while (0)
+
+#define CRC32(crc, value, size) \
+	_CRC32(crc, value, size, crc32)
+
+#define CRC32C(crc, value, size) \
+	_CRC32(crc, value, size, crc32c)
+
+static u32 crc32_mips_le_hw(u32 crc_, const u8 *p, unsigned int len)
+{
+	u32 crc = crc_;
+
+#ifdef CONFIG_64BIT
+	while (len >= sizeof(u64)) {
+		u64 value = get_unaligned_le64(p);
+
+		CRC32(crc, value, d);
+		p += sizeof(u64);
+		len -= sizeof(u64);
+	}
+
+	if (len & sizeof(u32)) {
+#else /* !CONFIG_64BIT */
+	while (len >= sizeof(u32)) {
+#endif
+		u32 value = get_unaligned_le32(p);
+
+		CRC32(crc, value, w);
+		p += sizeof(u32);
+		len -= sizeof(u32);
+	}
+
+	if (len & sizeof(u16)) {
+		u16 value = get_unaligned_le16(p);
+
+		CRC32(crc, value, h);
+		p += sizeof(u16);
+	}
+
+	if (len & sizeof(u8)) {
+		u8 value = *p++;
+
+		CRC32(crc, value, b);
+	}
+
+	return crc;
+}
+
+static u32 crc32c_mips_le_hw(u32 crc_, const u8 *p, unsigned int len)
+{
+	u32 crc = crc_;
+
+#ifdef CONFIG_64BIT
+	while (len >= sizeof(u64)) {
+		u64 value = get_unaligned_le64(p);
+
+		CRC32C(crc, value, d);
+		p += sizeof(u64);
+		len -= sizeof(u64);
+	}
+
+	if (len & sizeof(u32)) {
+#else /* !CONFIG_64BIT */
+	while (len >= sizeof(u32)) {
+#endif
+		u32 value = get_unaligned_le32(p);
+
+		CRC32C(crc, value, w);
+		p += sizeof(u32);
+		len -= sizeof(u32);
+	}
+
+	if (len & sizeof(u16)) {
+		u16 value = get_unaligned_le16(p);
+
+		CRC32C(crc, value, h);
+		p += sizeof(u16);
+	}
+
+	if (len & sizeof(u8)) {
+		u8 value = *p++;
+
+		CRC32C(crc, value, b);
+	}
+	return crc;
+}
+
+#define CHKSUM_BLOCK_SIZE	1
+#define CHKSUM_DIGEST_SIZE	4
+
+struct chksum_ctx {
+	u32 key;
+};
+
+struct chksum_desc_ctx {
+	u32 crc;
+};
+
+static int chksum_init(struct shash_desc *desc)
+{
+	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	ctx->crc = mctx->key;
+
+	return 0;
+}
+
+/*
+ * Setting the seed allows arbitrary accumulators and flexible XOR policy
+ * If your algorithm starts with ~0, then XOR with ~0 before you set
+ * the seed.
+ */
+static int chksum_setkey(struct crypto_shash *tfm, const u8 *key,
+			 unsigned int keylen)
+{
+	struct chksum_ctx *mctx = crypto_shash_ctx(tfm);
+
+	if (keylen != sizeof(mctx->key)) {
+		crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+		return -EINVAL;
+	}
+	mctx->key = get_unaligned_le32(key);
+	return 0;
+}
+
+static int chksum_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int length)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	ctx->crc = crc32_mips_le_hw(ctx->crc, data, length);
+	return 0;
+}
+
+static int chksumc_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int length)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	ctx->crc = crc32c_mips_le_hw(ctx->crc, data, length);
+	return 0;
+}
+
+static int chksum_final(struct shash_desc *desc, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	put_unaligned_le32(ctx->crc, out);
+	return 0;
+}
+
+static int chksumc_final(struct shash_desc *desc, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	put_unaligned_le32(~ctx->crc, out);
+	return 0;
+}
+
+static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
+{
+	put_unaligned_le32(crc32_mips_le_hw(crc, data, len), out);
+	return 0;
+}
+
+static int __chksumc_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
+{
+	put_unaligned_le32(~crc32c_mips_le_hw(crc, data, len), out);
+	return 0;
+}
+
+static int chksum_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	return __chksum_finup(ctx->crc, data, len, out);
+}
+
+static int chksumc_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	return __chksumc_finup(ctx->crc, data, len, out);
+}
+
+static int chksum_digest(struct shash_desc *desc, const u8 *data,
+			 unsigned int length, u8 *out)
+{
+	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
+
+	return __chksum_finup(mctx->key, data, length, out);
+}
+
+static int chksumc_digest(struct shash_desc *desc, const u8 *data,
+			 unsigned int length, u8 *out)
+{
+	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
+
+	return __chksumc_finup(mctx->key, data, length, out);
+}
+
+static int chksum_cra_init(struct crypto_tfm *tfm)
+{
+	struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
+
+	mctx->key = ~0;
+	return 0;
+}
+
+static struct shash_alg crc32_alg = {
+	.digestsize		=	CHKSUM_DIGEST_SIZE,
+	.setkey			=	chksum_setkey,
+	.init			=	chksum_init,
+	.update			=	chksum_update,
+	.final			=	chksum_final,
+	.finup			=	chksum_finup,
+	.digest			=	chksum_digest,
+	.descsize		=	sizeof(struct chksum_desc_ctx),
+	.base			=	{
+		.cra_name		=	"crc32",
+		.cra_driver_name	=	"crc32-mips-hw",
+		.cra_priority		=	300,
+		.cra_flags		=	CRYPTO_ALG_OPTIONAL_KEY,
+		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
+		.cra_alignmask		=	0,
+		.cra_ctxsize		=	sizeof(struct chksum_ctx),
+		.cra_module		=	THIS_MODULE,
+		.cra_init		=	chksum_cra_init,
+	}
+};
+
+static struct shash_alg crc32c_alg = {
+	.digestsize		=	CHKSUM_DIGEST_SIZE,
+	.setkey			=	chksum_setkey,
+	.init			=	chksum_init,
+	.update			=	chksumc_update,
+	.final			=	chksumc_final,
+	.finup			=	chksumc_finup,
+	.digest			=	chksumc_digest,
+	.descsize		=	sizeof(struct chksum_desc_ctx),
+	.base			=	{
+		.cra_name		=	"crc32c",
+		.cra_driver_name	=	"crc32c-mips-hw",
+		.cra_priority		=	300,
+		.cra_flags		=	CRYPTO_ALG_OPTIONAL_KEY,
+		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
+		.cra_alignmask		=	0,
+		.cra_ctxsize		=	sizeof(struct chksum_ctx),
+		.cra_module		=	THIS_MODULE,
+		.cra_init		=	chksum_cra_init,
+	}
+};
+
+static int __init crc32_mod_init(void)
+{
+	int err;
+
+	err = crypto_register_shash(&crc32_alg);
+
+	if (err)
+		return err;
+
+	err = crypto_register_shash(&crc32c_alg);
+
+	if (err) {
+		crypto_unregister_shash(&crc32_alg);
+		return err;
+	}
+
+	return 0;
+}
+
+static void __exit crc32_mod_exit(void)
+{
+	crypto_unregister_shash(&crc32_alg);
+	crypto_unregister_shash(&crc32c_alg);
+}
+
+MODULE_AUTHOR("Marcin Nowakowski <marcin.nowakowski@mips.com");
+MODULE_DESCRIPTION("CRC32 and CRC32C using optional MIPS instructions");
+MODULE_LICENSE("GPL v2");
+
+module_cpu_feature_match(MIPS_CRC32, crc32_mod_init);
+module_exit(crc32_mod_exit);

arch/mips/generic/Kconfig

@@ -27,6 +27,22 @@ config LEGACY_BOARD_SEAD3
 	  Enable this to include support for booting on MIPS SEAD-3 FPGA-based
 	  development boards, which boot using a legacy boot protocol.
 
+comment "MSCC Ocelot doesn't work with SEAD3 enabled"
+	depends on LEGACY_BOARD_SEAD3
+
+config LEGACY_BOARD_OCELOT
+	bool "Support MSCC Ocelot boards"
+	depends on LEGACY_BOARD_SEAD3=n
+	select LEGACY_BOARDS
+	select MSCC_OCELOT
+
+config MSCC_OCELOT
+	bool
+	select GPIOLIB
+	select MSCC_OCELOT_IRQ
+	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
+
 comment "FIT/UHI Boards"
 
 config FIT_IMAGE_FDT_BOSTON

arch/mips/generic/Makefile

@@ -14,5 +14,6 @@ obj-y += proc.o
 
 obj-$(CONFIG_YAMON_DT_SHIM)		+= yamon-dt.o
 obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o
+obj-$(CONFIG_LEGACY_BOARD_OCELOT)	+= board-ocelot.o
 obj-$(CONFIG_KEXEC)			+= kexec.o
 obj-$(CONFIG_VIRT_BOARD_RANCHU)		+= board-ranchu.o

arch/mips/generic/board-ocelot.c

@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi MIPS SoC support
+ *
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <asm/machine.h>
+#include <asm/prom.h>
+
+#define DEVCPU_GCB_CHIP_REGS_CHIP_ID	0x71070000
+#define CHIP_ID_PART_ID			GENMASK(27, 12)
+
+#define OCELOT_PART_ID			(0x7514 << 12)
+
+#define UART_UART			0x70100000
+
+static __init bool ocelot_detect(void)
+{
+	u32 rev;
+	int idx;
+
+	/* Look for the TLB entry set up by redboot before trying to use it */
+	write_c0_entryhi(DEVCPU_GCB_CHIP_REGS_CHIP_ID);
+	mtc0_tlbw_hazard();
+	tlb_probe();
+	tlb_probe_hazard();
+	idx = read_c0_index();
+	if (idx < 0)
+		return 0;
+
+	/* A TLB entry exists, lets assume its usable and check the CHIP ID */
+	rev = __raw_readl((void __iomem *)DEVCPU_GCB_CHIP_REGS_CHIP_ID);
+
+	if ((rev & CHIP_ID_PART_ID) != OCELOT_PART_ID)
+		return 0;
+
+	/* Copy command line from bootloader early for Initrd detection */
+	if (fw_arg0 < 10 && (fw_arg1 & 0xFFF00000) == 0x80000000) {
+		unsigned int prom_argc = fw_arg0;
+		const char **prom_argv = (const char **)fw_arg1;
+
+		if (prom_argc > 1 && strlen(prom_argv[1]) > 0)
+			/* ignore all built-in args if any f/w args given */
+			strcpy(arcs_cmdline, prom_argv[1]);
+	}
+
+	return 1;
+}
+
+static void __init ocelot_earlyprintk_init(void)
+{
+	void __iomem *uart_base;
+
+	uart_base = ioremap_nocache(UART_UART, 0x20);
+	setup_8250_early_printk_port((unsigned long)uart_base, 2, 50000);
+}
+
+static void __init ocelot_late_init(void)
+{
+	ocelot_earlyprintk_init();
+}
+
+static __init const void *ocelot_fixup_fdt(const void *fdt,
+					   const void *match_data)
+{
+	/* This has to be done so late because ioremap needs to work */
+	late_time_init = ocelot_late_init;
+
+	return fdt;
+}
+
+extern char __dtb_ocelot_pcb123_begin[];
+
+MIPS_MACHINE(ocelot) = {
+	.fdt = __dtb_ocelot_pcb123_begin,
+	.fixup_fdt = ocelot_fixup_fdt,
+	.detect = ocelot_detect,
+};

arch/mips/include/asm/cpu-features.h

@@ -11,6 +11,7 @@
 
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
+#include <asm/isa-rev.h>
 #include <cpu-feature-overrides.h>
 
 /*
@@ -493,7 +494,7 @@
 # define cpu_has_perf		(cpu_data[0].options & MIPS_CPU_PERF)
 #endif
 
-#if defined(CONFIG_SMP) && defined(__mips_isa_rev) && (__mips_isa_rev >= 6)
+#if defined(CONFIG_SMP) && (MIPS_ISA_REV >= 6)
 /*
  * Some systems share FTLB RAMs between threads within a core (siblings in
  * kernel parlance). This means that FTLB entries may become invalid at almost
@@ -525,7 +526,7 @@
 #  define cpu_has_shared_ftlb_entries \
 	(current_cpu_data.options & MIPS_CPU_SHARED_FTLB_ENTRIES)
 # endif
-#endif /* SMP && __mips_isa_rev >= 6 */
+#endif /* SMP && MIPS_ISA_REV >= 6 */
 
 #ifndef cpu_has_shared_ftlb_ram
 # define cpu_has_shared_ftlb_ram 0

arch/mips/include/asm/isa-rev.h

@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MIPS Tech, LLC
+ * Author: Matt Redfearn <matt.redfearn@mips.com>
+ */
+
+#ifndef __MIPS_ASM_ISA_REV_H__
+#define __MIPS_ASM_ISA_REV_H__
+
+/*
+ * The ISA revision level. This is 0 for MIPS I to V and N for
+ * MIPS{32,64}rN.
+ */
+
+/* If the compiler has defined __mips_isa_rev, believe it. */
+#ifdef __mips_isa_rev
+#define MIPS_ISA_REV __mips_isa_rev
+#else
+/* The compiler hasn't defined the isa rev so assume it's MIPS I - V (0) */
+#define MIPS_ISA_REV 0
+#endif
+
+
+#endif /* __MIPS_ASM_ISA_REV_H__ */

arch/mips/include/asm/mach-ath79/ar71xx_regs.h

@@ -167,7 +167,7 @@
 #define AR71XX_AHB_DIV_MASK		0x7
 
 #define AR724X_PLL_REG_CPU_CONFIG	0x00
-#define AR724X_PLL_REG_PCIE_CONFIG	0x18
+#define AR724X_PLL_REG_PCIE_CONFIG	0x10
 
 #define AR724X_PLL_FB_SHIFT		0
 #define AR724X_PLL_FB_MASK		0x3ff

arch/mips/include/asm/mipsregs.h

@@ -664,6 +664,7 @@
 #define MIPS_CONF5_FRE		(_ULCAST_(1) << 8)
 #define MIPS_CONF5_UFE		(_ULCAST_(1) << 9)
 #define MIPS_CONF5_CA2		(_ULCAST_(1) << 14)
+#define MIPS_CONF5_CRCP		(_ULCAST_(1) << 18)
 #define MIPS_CONF5_MSAEN	(_ULCAST_(1) << 27)
 #define MIPS_CONF5_EVA		(_ULCAST_(1) << 28)
 #define MIPS_CONF5_CV		(_ULCAST_(1) << 29)

arch/mips/include/uapi/asm/hwcap.h

@@ -5,5 +5,6 @@
 /* HWCAP flags */
 #define HWCAP_MIPS_R6		(1 << 0)
 #define HWCAP_MIPS_MSA		(1 << 1)
+#define HWCAP_MIPS_CRC32	(1 << 2)
 
 #endif /* _UAPI_ASM_HWCAP_H */

arch/mips/kernel/cpu-probe.c

@@ -848,6 +848,9 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
 	if (config5 & MIPS_CONF5_CA2)
 		c->ases |= MIPS_ASE_MIPS16E2;
 
+	if (config5 & MIPS_CONF5_CRCP)
+		elf_hwcap |= HWCAP_MIPS_CRC32;
+
 	return config5 & MIPS_CONF_M;
 }
 

arch/mips/kernel/pm-cps.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
+#include <linux/suspend.h>
 
 #include <asm/asm-offsets.h>
 #include <asm/cacheflush.h>
@@ -670,6 +671,34 @@ static int cps_pm_online_cpu(unsigned int cpu)
 	return 0;
 }
 
+static int cps_pm_power_notifier(struct notifier_block *this,
+				 unsigned long event, void *ptr)
+{
+	unsigned int stat;
+
+	switch (event) {
+	case PM_SUSPEND_PREPARE:
+		stat = read_cpc_cl_stat_conf();
+		/*
+		 * If we're attempting to suspend the system and power down all
+		 * of the cores, the JTAG detect bit indicates that the CPC will
+		 * instead put the cores into clock-off state. In this state
+		 * a connected debugger can cause the CPU to attempt
+		 * interactions with the powered down system. At best this will
+		 * fail. At worst, it can hang the NoC, requiring a hard reset.
+		 * To avoid this, just block system suspend if a JTAG probe
+		 * is detected.
+		 */
+		if (stat & CPC_Cx_STAT_CONF_EJTAG_PROBE) {
+			pr_warn("JTAG probe is connected - abort suspend\n");
+			return NOTIFY_BAD;
+		}
+		return NOTIFY_DONE;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
 static int __init cps_pm_init(void)
 {
 	/* A CM is required for all non-coherent states */
@@ -705,6 +734,8 @@ static int __init cps_pm_init(void)
 		pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");
 	}
 
+	pm_notifier(cps_pm_power_notifier, 0);
+
 	return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mips/cps_pm:online",
 				 cps_pm_online_cpu, NULL);
 }

arch/mips/kernel/reset.c

@@ -13,6 +13,9 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 
+#include <asm/compiler.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
 #include <asm/reboot.h>
 
 /*
@@ -26,6 +29,62 @@ void (*pm_power_off)(void);
 
 EXPORT_SYMBOL(pm_power_off);
 
+static void machine_hang(void)
+{
+	/*
+	 * We're hanging the system so we don't want to be interrupted anymore.
+	 * Any interrupt handlers that ran would at best be useless & at worst
+	 * go awry because the system isn't in a functional state.
+	 */
+	local_irq_disable();
+
+	/*
+	 * Mask all interrupts, giving us a better chance of remaining in the
+	 * low power wait state.
+	 */
+	clear_c0_status(ST0_IM);
+
+	while (true) {
+		if (cpu_has_mips_r) {
+			/*
+			 * We know that the wait instruction is supported so
+			 * make use of it directly, leaving interrupts
+			 * disabled.
+			 */
+			asm volatile(
+				".set	push\n\t"
+				".set	" MIPS_ISA_ARCH_LEVEL "\n\t"
+				"wait\n\t"
+				".set	pop");
+		} else if (cpu_wait) {
+			/*
+			 * Try the cpu_wait() callback. This isn't ideal since
+			 * it'll re-enable interrupts, but that ought to be
+			 * harmless given that they're all masked.
+			 */
+			cpu_wait();
+			local_irq_disable();
+		} else {
+			/*
+			 * We're going to burn some power running round the
+			 * loop, but we don't really have a choice. This isn't
+			 * a path we should expect to run for long during
+			 * typical use anyway.
+			 */
+		}
+
+		/*
+		 * In most modern MIPS CPUs interrupts will cause the wait
+		 * instruction to graduate even when disabled, and in some
+		 * cases even when masked. In order to prevent a timer
+		 * interrupt from continuously taking us out of the low power
+		 * wait state, we clear any pending timer interrupt here.
+		 */
+		if (cpu_has_counter)
+			write_c0_compare(0);
+	}
+}
+
 void machine_restart(char *command)
 {
 	if (_machine_restart)
@@ -38,8 +97,7 @@ void machine_restart(char *command)
 	do_kernel_restart(command);
 	mdelay(1000);
 	pr_emerg("Reboot failed -- System halted\n");
-	local_irq_disable();
-	while (1);
+	machine_hang();
 }
 
 void machine_halt(void)
@@ -51,8 +109,7 @@ void machine_halt(void)
 	preempt_disable();
 	smp_send_stop();
 #endif
-	local_irq_disable();
-	while (1);
+	machine_hang();
 }
 
 void machine_power_off(void)
@@ -64,6 +121,5 @@ void machine_power_off(void)
 	preempt_disable();
 	smp_send_stop();
 #endif
-	local_irq_disable();
-	while (1);
+	machine_hang();
 }

arch/mips/kernel/setup.c

@@ -155,7 +155,8 @@ void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_add
 	add_memory_region(start, size, BOOT_MEM_RAM);
 }
 
-bool __init memory_region_available(phys_addr_t start, phys_addr_t size)
+static bool __init __maybe_unused memory_region_available(phys_addr_t start,
+							  phys_addr_t size)
 {
 	int i;
 	bool in_ram = false, free = true;
@@ -453,7 +454,7 @@ static void __init bootmem_init(void)
 		pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
 			(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
 			min_low_pfn - ARCH_PFN_OFFSET);
-	} else if (min_low_pfn < ARCH_PFN_OFFSET) {
+	} else if (ARCH_PFN_OFFSET - min_low_pfn > 0UL) {
 		pr_info("%lu free pages won't be used\n",
 			ARCH_PFN_OFFSET - min_low_pfn);
 	}

arch/mips/mm/init.c

@@ -30,7 +30,6 @@
 #include <linux/hardirq.h>
 #include <linux/gfp.h>
 #include <linux/kcore.h>
-#include <linux/export.h>
 #include <linux/initrd.h>
 
 #include <asm/asm-offsets.h>
@@ -46,7 +45,6 @@
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
 #include <asm/fixmap.h>
-#include <asm/maar.h>
 
 /*
  * We have up to 8 empty zeroed pages so we can map one of the right colour

arch/mips/net/bpf_jit_asm.S

@@ -11,6 +11,7 @@
  */
 
 #include <asm/asm.h>
+#include <asm/isa-rev.h>
 #include <asm/regdef.h>
 #include "bpf_jit.h"
 
@@ -65,7 +66,7 @@ FEXPORT(sk_load_word_positive)
 	lw	$r_A, 0(t1)
 	.set	noreorder
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
-# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
+# if MIPS_ISA_REV >= 2
 	wsbh	t0, $r_A
 	rotr	$r_A, t0, 16
 # else
@@ -92,7 +93,7 @@ FEXPORT(sk_load_half_positive)
 	PTR_ADDU t1, $r_skb_data, offset
 	lhu	$r_A, 0(t1)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
-# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
+# if MIPS_ISA_REV >= 2
 	wsbh	$r_A, $r_A
 # else
 	sll	t0, $r_A, 8
@@ -170,7 +171,7 @@ FEXPORT(sk_load_byte_positive)
 NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
 	bpf_slow_path_common(4)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
-# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
+# if MIPS_ISA_REV >= 2
 	wsbh	t0, $r_s0
 	jr	$r_ra
 	 rotr	$r_A, t0, 16
@@ -196,7 +197,7 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
 NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
 	bpf_slow_path_common(2)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
-# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
+# if MIPS_ISA_REV >= 2
 	jr	$r_ra
 	 wsbh	$r_A, $r_s0
 # else

arch/mips/pci/pci-mt7620.c

@@ -315,6 +315,7 @@ static int mt7620_pci_probe(struct platform_device *pdev)
 		break;
 
 	case MT762X_SOC_MT7628AN:
+	case MT762X_SOC_MT7688:
 		if (mt7628_pci_hw_init(pdev))
 			return -1;
 		break;

arch/mips/txx9/rbtx4927/setup.c

@@ -319,7 +319,7 @@ static void __init rbtx4927_mtd_init(void)
 
 static void __init rbtx4927_gpioled_init(void)
 {
-	static struct gpio_led leds[] = {
+	static const struct gpio_led leds[] = {
 		{ .name = "gpioled:green:0", .gpio = 0, .active_low = 1, },
 		{ .name = "gpioled:green:1", .gpio = 1, .active_low = 1, },
 	};

arch/mips/vdso/elf.S

@@ -10,6 +10,8 @@
 
 #include "vdso.h"
 
+#include <asm/isa-rev.h>
+
 #include <linux/elfnote.h>
 #include <linux/version.h>
 
@@ -40,11 +42,7 @@ __mips_abiflags:
 	.byte	__mips		/* isa_level */
 
 	/* isa_rev */
-#ifdef __mips_isa_rev
-	.byte	__mips_isa_rev
-#else
-	.byte	0
-#endif
+	.byte	MIPS_ISA_REV
 
 	/* gpr_size */
 #ifdef __mips64
@@ -54,7 +52,7 @@ __mips_abiflags:
 #endif
 
 	/* cpr1_size */
-#if (defined(__mips_isa_rev) && __mips_isa_rev >= 6) || defined(__mips64)
+#if (MIPS_ISA_REV >= 6) || defined(__mips64)
 	.byte	2		/* AFL_REG_64 */
 #else
 	.byte	1		/* AFL_REG_32 */

crypto/Kconfig

@@ -500,6 +500,15 @@ config CRYPTO_CRC32_PCLMUL
 	  which will enable any routine to use the CRC-32-IEEE 802.3 checksum
 	  and gain better performance as compared with the table implementation.
 
+config CRYPTO_CRC32_MIPS
+	tristate "CRC32c and CRC32 CRC algorithm (MIPS)"
+	depends on MIPS_CRC_SUPPORT
+	select CRYPTO_HASH
+	help
+	  CRC32c and CRC32 CRC algorithms implemented using mips crypto
+	  instructions, when available.
+
+
 config CRYPTO_CRCT10DIF
 	tristate "CRCT10DIF algorithm"
 	select CRYPTO_HASH

drivers/firmware/broadcom/Kconfig

@@ -13,6 +13,7 @@ config BCM47XX_NVRAM
 config BCM47XX_SPROM
 	bool "Broadcom SPROM driver"
 	depends on BCM47XX_NVRAM
+	select GENERIC_NET_UTILS
 	help
 	  Broadcom devices store configuration data in SPROM. Accessing it is
 	  specific to the bus host type, e.g. PCI(e) devices have it mapped in

drivers/firmware/broadcom/bcm47xx_sprom.c

@@ -137,20 +137,6 @@ static void nvram_read_leddc(const char *prefix, const char *name,
 	*leddc_off_time = (val >> 16) & 0xff;
 }
 
-static void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
-{
-	if (strchr(buf, ':'))
-		sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
-			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
-			&macaddr[5]);
-	else if (strchr(buf, '-'))
-		sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
-			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
-			&macaddr[5]);
-	else
-		pr_warn("Can not parse mac address: %s\n", buf);
-}
-
 static void nvram_read_macaddr(const char *prefix, const char *name,
 			       u8 val[6], bool fallback)
 {
@@ -161,7 +147,9 @@ static void nvram_read_macaddr(const char *prefix, const char *name,
 	if (err < 0)
 		return;
 
-	bcm47xx_nvram_parse_macaddr(buf, val);
+	strreplace(buf, '-', ':');
+	if (!mac_pton(buf, val))
+		pr_warn("Can not parse mac address: %s\n", buf);
 }
 
 static void nvram_read_alpha2(const char *prefix, const char *name,