Merge tag 'v4.10-rc8' into drm-next

Linux 4.10-rc8

Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -15,6 +15,9 @@ Properties:
   Second cell specifies the irq distribution mode to cores
      0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
 
+  The second cell in interrupts property is deprecated and may be ignored by
+  the kernel.
+
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
 

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.

Documentation/devicetree/bindings/net/phy.txt

@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  If the PHY reports an incorrect ID (or none at all) then the
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as

Documentation/media/uapi/cec/cec-func-close.rst

@@ -33,11 +33,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 Closes the cec device. Resources associated with the file descriptor are
 freed. The device configuration remain unchanged.
 

Documentation/media/uapi/cec/cec-func-ioctl.rst

@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 The :c:func:`ioctl()` function manipulates cec device parameters. The
 argument ``fd`` must be an open file descriptor.
 

Documentation/media/uapi/cec/cec-func-open.rst

@@ -46,11 +46,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To open a cec device applications call :c:func:`open()` with the
 desired device name. The function has no side effects; the device
 configuration remain unchanged.

Documentation/media/uapi/cec/cec-func-poll.rst

@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 With the :c:func:`poll()` function applications can wait for CEC
 events.
 

Documentation/media/uapi/cec/cec-intro.rst

@@ -3,11 +3,6 @@
 Introduction
 ============
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 HDMI connectors provide a single pin for use by the Consumer Electronics
 Control protocol. This protocol allows different devices connected by an
 HDMI cable to communicate. The protocol for CEC version 1.4 is defined
@@ -31,3 +26,15 @@ control just the CEC pin.
 Drivers that support CEC will create a CEC device node (/dev/cecX) to
 give userspace access to the CEC adapter. The
 :ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do.
+
+In order to check the support and test it, it is suggested to download
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It
+provides three tools to handle CEC:
+
+- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit
+  and monitor CEC messages.
+
+- cec-compliance: does a CEC compliance test of a remote CEC device to
+  determine how compliant the CEC implementation is.
+
+- cec-follower: emulates a CEC follower.

Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst

@@ -29,11 +29,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query
 device information, applications call the ioctl with a pointer to a
 struct :c:type:`cec_caps`. The driver fills the structure and

Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst

@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current CEC logical addresses, applications call
 :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
 struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.

Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst

@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current physical address applications call
 :ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
 driver stores the physical address.

Documentation/media/uapi/cec/cec-ioc-dqevent.rst

@@ -30,11 +30,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 CEC devices can send asynchronous events. These can be retrieved by
 calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
 non-blocking mode and no event is pending, then it will return -1 and

Documentation/media/uapi/cec/cec-ioc-g-mode.rst

@@ -31,11 +31,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent
 applications from stepping on each others toes it must be possible to
 obtain exclusive access to the CEC adapter. This ioctl sets the

Documentation/media/uapi/cec/cec-ioc-receive.rst

@@ -34,11 +34,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To receive a CEC message the application has to fill in the
 ``timeout`` field of struct :c:type:`cec_msg` and pass it to
 :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.

Documentation/power/states.txt

@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.
 

MAINTAINERS

@@ -1091,7 +1091,7 @@ F:	arch/arm/boot/dts/aspeed-*
 F:	drivers/*/*aspeed*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1773,7 +1773,7 @@ F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
 
 ARM/SOCFPGA ARCHITECTURE
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
@@ -1783,7 +1783,7 @@ W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
@@ -2175,56 +2175,56 @@ F:	include/linux/atm*
 F:	include/uapi/linux/atm*
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 
 ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/power/reset/at91-sama5d2_shdwc.c
 
 ATMEL SAMA5D2 ADC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/adc/at91-sama5d2_adc.c
 
 ATMEL Audio ALSA driver
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/atmel
 
 ATMEL XDMA DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	dmaengine@vger.kernel.org
 S:	Supported
 F:	drivers/dma/at_xdmac.c
 
 ATMEL I2C DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
 F:	drivers/i2c/busses/i2c-at91.c
 
 ATMEL ISI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 F:	drivers/media/platform/soc_camera/atmel-isi.c
 F:	include/media/atmel-isi.h
 
 ATMEL LCDFB DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -2236,32 +2236,32 @@ S:	Supported
 F:	drivers/mtd/nand/atmel_nand*
 
 ATMEL SDMMC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
 F:	drivers/mmc/host/sdhci-of-at91.c
 
 ATMEL SPI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/spi/spi-atmel.*
 
 ATMEL SSC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel-ssc.c
 F:	include/linux/atmel-ssc.h
 
 ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel_tclib.c
 F:	drivers/clocksource/tcb_clksrc.c
 
 ATMEL USBA UDC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
@@ -3567,7 +3567,7 @@ F:	drivers/infiniband/hw/cxgb3/
 F:	include/uapi/rdma/cxgb3-abi.h
 
 CXGB4 ETHERNET DRIVER (CXGB4)
-M:	Hariprasad S <hariprasad@chelsio.com>
+M:	Ganesh Goudar <ganeshgr@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
@@ -4154,7 +4154,7 @@ F:	Documentation/gpu/i915.rst
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:      Zhenyu Wang <zhenyuw@linux.intel.com>
 M:      Zhi Wang <zhi.a.wang@intel.com>
-L:      igvt-g-dev@lists.01.org
+L:      intel-gvt-dev@lists.freedesktop.org
 L:      intel-gfx@lists.freedesktop.org
 W:      https://01.org/igvt-g
 T:      git https://github.com/01org/gvt-linux.git
@@ -9743,7 +9743,7 @@ S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.*
 
 PIN CONTROLLER - ATMEL AT91 PIO4
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-gpio@vger.kernel.org
 S:	Supported
@@ -10202,7 +10202,6 @@ F:	drivers/media/tuners/qt1010*
 QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
-L:	ath9k-devel@lists.ath9k.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
@@ -13073,7 +13072,7 @@ F:	drivers/input/serio/userio.c
 F:	include/uapi/linux/userio.h
 
 VIRTIO CONSOLE DRIVER
-M:	Amit Shah <amit.shah@redhat.com>
+M:	Amit Shah <amit@kernel.org>
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	drivers/char/virtio_console.c

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Anniversary Edition
+EXTRAVERSION = -rc8
+NAME = Fearless Coyote
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -797,7 +797,7 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 KBUILD_ARFLAGS := $(call ar-option,D)
 
 # check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
 	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
 endif

arch/arc/include/asm/delay.h

@@ -26,7 +26,9 @@ static inline void __delay(unsigned long loops)
 	"	lp  1f			\n"
 	"	nop			\n"
 	"1:				\n"
-	: : "r"(loops));
+	:
+        : "r"(loops)
+        : "lp_count");
 }
 
 extern void __bad_udelay(void);

arch/arc/kernel/head.S

@@ -71,14 +71,14 @@ ENTRY(stext)
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	mov.nz	r0, r5
-#ifdef CONFIG_ARC_SMP_HALT_ON_RESET
-	; Non-Master can proceed as system would be booted sufficiently
-	jnz	first_lines_of_secondary
-#else
+	bz	.Lmaster_proceed
+
 	; Non-Masters wait for Master to boot enough and bring them up
-	jnz	arc_platform_smp_wait_to_boot
-#endif
-	; Master falls thru
+	; when they resume, tail-call to entry point
+	mov	blink, @first_lines_of_secondary
+	j	arc_platform_smp_wait_to_boot
+
+.Lmaster_proceed:
 #endif
 
 	; Clear BSS before updating any globals

arch/arc/kernel/mcip.c

@@ -93,11 +93,10 @@ static void mcip_probe_n_setup(void)
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	sprintf(smp_cpuinfo_buf,
-		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
 		mp.ver, mp.num_cores,
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
-		IS_AVAIL1(mp.llm, "LLM "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
@@ -175,7 +174,6 @@ static void idu_irq_unmask(struct irq_data *data)
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
-#ifdef CONFIG_SMP
 static int
 idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 		     bool force)
@@ -205,12 +203,27 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 
 	return IRQ_SET_MASK_OK;
 }
-#endif
+
+static void idu_irq_enable(struct irq_data *data)
+{
+	/*
+	 * By default send all common interrupts to all available online CPUs.
+	 * The affinity of common interrupts in IDU must be set manually since
+	 * in some cases the kernel will not call irq_set_affinity() by itself:
+	 *   1. When the kernel is not configured with support of SMP.
+	 *   2. When the kernel is configured with support of SMP but upper
+	 *      interrupt controllers does not support setting of the affinity
+	 *      and cannot propagate it to IDU.
+	 */
+	idu_irq_set_affinity(data, cpu_online_mask, false);
+	idu_irq_unmask(data);
+}
 
 static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
 	.irq_mask		= idu_irq_mask,
 	.irq_unmask		= idu_irq_unmask,
+	.irq_enable		= idu_irq_enable,
 #ifdef CONFIG_SMP
 	.irq_set_affinity       = idu_irq_set_affinity,
 #endif
@@ -243,36 +256,14 @@ static int idu_irq_xlate(struct irq_domain *d, struct device_node *n,
 			 const u32 *intspec, unsigned int intsize,
 			 irq_hw_number_t *out_hwirq, unsigned int *out_type)
 {
-	irq_hw_number_t hwirq = *out_hwirq = intspec[0];
-	int distri = intspec[1];
-	unsigned long flags;
-
+	/*
+	 * Ignore value of interrupt distribution mode for common interrupts in
+	 * IDU which resides in intspec[1] since setting an affinity using value
+	 * from Device Tree is deprecated in ARC.
+	 */
+	*out_hwirq = intspec[0];
 	*out_type = IRQ_TYPE_NONE;
 
-	/* XXX: validate distribution scheme again online cpu mask */
-	if (distri == 0) {
-		/* 0 - Round Robin to all cpus, otherwise 1 bit per core */
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		idu_set_dest(hwirq, BIT(num_online_cpus()) - 1);
-		idu_set_mode(hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	} else {
-		/*
-		 * DEST based distribution for Level Triggered intr can only
-		 * have 1 CPU, so generalize it to always contain 1 cpu
-		 */
-		int cpu = ffs(distri);
-
-		if (cpu != fls(distri))
-			pr_warn("IDU irq %lx distri mode set to cpu %x\n",
-				hwirq, cpu);
-
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		idu_set_dest(hwirq, cpu);
-		idu_set_mode(hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_DEST);
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	}
-
 	return 0;
 }
 

arch/arc/kernel/smp.c

@@ -90,22 +90,37 @@ void __init smp_cpus_done(unsigned int max_cpus)
  */
 static volatile int wake_flag;
 
+#ifdef CONFIG_ISA_ARCOMPACT
+
+#define __boot_read(f)		f
+#define __boot_write(f, v)	f = v
+
+#else
+
+#define __boot_read(f)		arc_read_uncached_32(&f)
+#define __boot_write(f, v)	arc_write_uncached_32(&f, v)
+
+#endif
+
 static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
 {
 	BUG_ON(cpu == 0);
-	wake_flag = cpu;
+
+	__boot_write(wake_flag, cpu);
 }
 
 void arc_platform_smp_wait_to_boot(int cpu)
 {
-	while (wake_flag != cpu)
+	/* for halt-on-reset, we've waited already */
+	if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
+		return;
+
+	while (__boot_read(wake_flag) != cpu)
 		;
 
-	wake_flag = 0;
-	__asm__ __volatile__("j @first_lines_of_secondary	\n");
+	__boot_write(wake_flag, 0);
 }
 
-
 const char *arc_platform_smp_cpuinfo(void)
 {
 	return plat_smp_ops.info ? : "";

arch/arc/kernel/unaligned.c

@@ -241,8 +241,9 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
+	/* clear any remanants of delay slot */
 	if (delay_mode(regs)) {
-		regs->ret = regs->bta;
+		regs->ret = regs->bta & ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;

arch/arm/boot/dts/Makefile

@@ -617,7 +617,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-linkstation-lsgl.dtb \
 	orion5x-linkstation-lswtgl.dtb \
-	orion5x-lschl.dtb \
+	orion5x-linkstation-lschl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-netgear-wnr854t.dtb \

arch/arm/boot/dts/imx1.dtsi

@@ -18,6 +18,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/imx23.dtsi

@@ -16,6 +16,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio0;

arch/arm/boot/dts/imx25.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx27.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx28.dtsi

@@ -17,6 +17,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &mac0;

arch/arm/boot/dts/imx31.dtsi

@@ -12,6 +12,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		serial0 = &uart1;

arch/arm/boot/dts/imx35.dtsi

@@ -13,6 +13,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx50.dtsi

@@ -17,6 +17,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx51.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx53.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6dl.dtsi

@@ -137,7 +137,7 @@
 &gpio4 {
 	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
 		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
-		      <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
 		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
 		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -16,6 +16,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6sl.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6sx.dtsi

@@ -15,6 +15,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		can0 = &flexcan1;

arch/arm/boot/dts/imx6ul.dtsi

@@ -15,6 +15,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec1;

arch/arm/boot/dts/imx7s.dtsi

@@ -50,6 +50,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/orion5x-lschl.dts → arch/arm/boot/dts/orion5x-linkstation-lschl.dts

@@ -2,7 +2,7 @@
  * Device Tree file for Buffalo Linkstation LS-CHLv3
  *
  * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
- * Copyright (C) 2015, 2016
+ * Copyright (C) 2015-2017
  * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
@@ -52,7 +52,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Buffalo Linkstation Live v3 (LS-CHL)";
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
 	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory { /* 128 MB */

arch/arm/boot/dts/stih407-family.dtsi

@@ -680,6 +680,7 @@
 				phy-names	= "usb2-phy", "usb3-phy";
 				phys		= <&usb2_picophy0>,
 						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
 			};
 		};
 

arch/arm/configs/ezx_defconfig

@@ -64,8 +64,8 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/configs/imote2_defconfig

@@ -56,8 +56,8 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/kernel/ptrace.c

@@ -600,7 +600,7 @@ static int gpr_set(struct task_struct *target,
 		   const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	struct pt_regs newregs;
+	struct pt_regs newregs = *task_pt_regs(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &newregs,

arch/arm/mach-imx/mmdc.c

@@ -60,7 +60,6 @@
 
 #define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
 
-static enum cpuhp_state cpuhp_mmdc_state;
 static int ddr_type;
 
 struct fsl_mmdc_devtype_data {
@@ -82,6 +81,7 @@ static const struct of_device_id imx_mmdc_dt_ids[] = {
 
 #ifdef CONFIG_PERF_EVENTS
 
+static enum cpuhp_state cpuhp_mmdc_state;
 static DEFINE_IDA(mmdc_ida);
 
 PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")

arch/arm/mm/fault.c

@@ -610,9 +610,9 @@ static int __init early_abort_handler(unsigned long addr, unsigned int fsr,
 
 void __init early_abt_enable(void)
 {
-	fsr_info[22].fn = early_abort_handler;
+	fsr_info[FSR_FS_AEA].fn = early_abort_handler;
 	local_abt_enable();
-	fsr_info[22].fn = do_bad;
+	fsr_info[FSR_FS_AEA].fn = do_bad;
 }
 
 #ifndef CONFIG_ARM_LPAE

arch/arm/mm/fault.h

@@ -11,11 +11,15 @@
 #define FSR_FS5_0		(0x3f)
 
 #ifdef CONFIG_ARM_LPAE
+#define FSR_FS_AEA		17
+
 static inline int fsr_fs(unsigned int fsr)
 {
 	return fsr & FSR_FS5_0;
 }
 #else
+#define FSR_FS_AEA		22
+
 static inline int fsr_fs(unsigned int fsr)
 {
 	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -55,6 +55,24 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -151,6 +151,18 @@
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
 };
 
 &ir {

arch/arm64/crypto/aes-modes.S

@@ -193,15 +193,16 @@ AES_ENTRY(aes_cbc_encrypt)
 	cbz		w6, .Lcbcencloop
 
 	ld1		{v0.16b}, [x5]			/* get iv */
-	enc_prepare	w3, x2, x5
+	enc_prepare	w3, x2, x6
 
 .Lcbcencloop:
 	ld1		{v1.16b}, [x1], #16		/* get next pt block */
 	eor		v0.16b, v0.16b, v1.16b		/* ..and xor with iv */
-	encrypt_block	v0, w3, x2, x5, w6
+	encrypt_block	v0, w3, x2, x6, w7
 	st1		{v0.16b}, [x0], #16
 	subs		w4, w4, #1
 	bne		.Lcbcencloop
+	st1		{v0.16b}, [x5]			/* return iv */
 	ret
 AES_ENDPROC(aes_cbc_encrypt)
 
@@ -211,7 +212,7 @@ AES_ENTRY(aes_cbc_decrypt)
 	cbz		w6, .LcbcdecloopNx
 
 	ld1		{v7.16b}, [x5]			/* get iv */
-	dec_prepare	w3, x2, x5
+	dec_prepare	w3, x2, x6
 
 .LcbcdecloopNx:
 #if INTERLEAVE >= 2
@@ -248,7 +249,7 @@ AES_ENTRY(aes_cbc_decrypt)
 .Lcbcdecloop:
 	ld1		{v1.16b}, [x1], #16		/* get next ct block */
 	mov		v0.16b, v1.16b			/* ...and copy to v0 */
-	decrypt_block	v0, w3, x2, x5, w6
+	decrypt_block	v0, w3, x2, x6, w7
 	eor		v0.16b, v0.16b, v7.16b		/* xor with iv => pt */
 	mov		v7.16b, v1.16b			/* ct is next iv */
 	st1		{v0.16b}, [x0], #16
@@ -256,6 +257,7 @@ AES_ENTRY(aes_cbc_decrypt)
 	bne		.Lcbcdecloop
 .Lcbcdecout:
 	FRAME_POP
+	st1		{v7.16b}, [x5]			/* return iv */
 	ret
 AES_ENDPROC(aes_cbc_decrypt)
 
@@ -267,24 +269,15 @@ AES_ENDPROC(aes_cbc_decrypt)
 
 AES_ENTRY(aes_ctr_encrypt)
 	FRAME_PUSH
-	cbnz		w6, .Lctrfirst		/* 1st time around? */
-	umov		x5, v4.d[1]		/* keep swabbed ctr in reg */
-	rev		x5, x5
-#if INTERLEAVE >= 2
-	cmn		w5, w4			/* 32 bit overflow? */
-	bcs		.Lctrinc
-	add		x5, x5, #1		/* increment BE ctr */
-	b		.LctrincNx
-#else
-	b		.Lctrinc
-#endif
-.Lctrfirst:
+	cbz		w6, .Lctrnotfirst	/* 1st time around? */
 	enc_prepare	w3, x2, x6
 	ld1		{v4.16b}, [x5]
-	umov		x5, v4.d[1]		/* keep swabbed ctr in reg */
-	rev		x5, x5
+
+.Lctrnotfirst:
+	umov		x8, v4.d[1]		/* keep swabbed ctr in reg */
+	rev		x8, x8
 #if INTERLEAVE >= 2
-	cmn		w5, w4			/* 32 bit overflow? */
+	cmn		w8, w4			/* 32 bit overflow? */
 	bcs		.Lctrloop
 .LctrloopNx:
 	subs		w4, w4, #INTERLEAVE
@@ -292,11 +285,11 @@ AES_ENTRY(aes_ctr_encrypt)
 #if INTERLEAVE == 2
 	mov		v0.8b, v4.8b
 	mov		v1.8b, v4.8b
-	rev		x7, x5
-	add		x5, x5, #1
+	rev		x7, x8
+	add		x8, x8, #1
 	ins		v0.d[1], x7
-	rev		x7, x5
-	add		x5, x5, #1
+	rev		x7, x8
+	add		x8, x8, #1
 	ins		v1.d[1], x7
 	ld1		{v2.16b-v3.16b}, [x1], #32	/* get 2 input blocks */
 	do_encrypt_block2x
@@ -305,7 +298,7 @@ AES_ENTRY(aes_ctr_encrypt)
 	st1		{v0.16b-v1.16b}, [x0], #32
 #else
 	ldr		q8, =0x30000000200000001	/* addends 1,2,3[,0] */
-	dup		v7.4s, w5
+	dup		v7.4s, w8
 	mov		v0.16b, v4.16b
 	add		v7.4s, v7.4s, v8.4s
 	mov		v1.16b, v4.16b
@@ -323,18 +316,12 @@ AES_ENTRY(aes_ctr_encrypt)
 	eor		v2.16b, v7.16b, v2.16b
 	eor		v3.16b, v5.16b, v3.16b
 	st1		{v0.16b-v3.16b}, [x0], #64
-	add		x5, x5, #INTERLEAVE
+	add		x8, x8, #INTERLEAVE
 #endif
-	cbz		w4, .LctroutNx
-.LctrincNx:
-	rev		x7, x5
+	rev		x7, x8
 	ins		v4.d[1], x7
+	cbz		w4, .Lctrout
 	b		.LctrloopNx
-.LctroutNx:
-	sub		x5, x5, #1
-	rev		x7, x5
-	ins		v4.d[1], x7
-	b		.Lctrout
 .Lctr1x:
 	adds		w4, w4, #INTERLEAVE
 	beq		.Lctrout
@@ -342,30 +329,39 @@ AES_ENTRY(aes_ctr_encrypt)
 .Lctrloop:
 	mov		v0.16b, v4.16b
 	encrypt_block	v0, w3, x2, x6, w7
+
+	adds		x8, x8, #1		/* increment BE ctr */
+	rev		x7, x8
+	ins		v4.d[1], x7
+	bcs		.Lctrcarry		/* overflow? */
+
+.Lctrcarrydone:
 	subs		w4, w4, #1
 	bmi		.Lctrhalfblock		/* blocks < 0 means 1/2 block */
 	ld1		{v3.16b}, [x1], #16
 	eor		v3.16b, v0.16b, v3.16b
 	st1		{v3.16b}, [x0], #16
-	beq		.Lctrout
-.Lctrinc:
-	adds		x5, x5, #1		/* increment BE ctr */
-	rev		x7, x5
-	ins		v4.d[1], x7
-	bcc		.Lctrloop		/* no overflow? */
-	umov		x7, v4.d[0]		/* load upper word of ctr  */
-	rev		x7, x7			/* ... to handle the carry */
-	add		x7, x7, #1
-	rev		x7, x7
-	ins		v4.d[0], x7
-	b		.Lctrloop
+	bne		.Lctrloop
+
+.Lctrout:
+	st1		{v4.16b}, [x5]		/* return next CTR value */
+	FRAME_POP
+	ret
+
 .Lctrhalfblock:
 	ld1		{v3.8b}, [x1]
 	eor		v3.8b, v0.8b, v3.8b
 	st1		{v3.8b}, [x0]
-.Lctrout:
 	FRAME_POP
 	ret
+
+.Lctrcarry:
+	umov		x7, v4.d[0]		/* load upper word of ctr  */
+	rev		x7, x7			/* ... to handle the carry */
+	add		x7, x7, #1
+	rev		x7, x7
+	ins		v4.d[0], x7
+	b		.Lctrcarrydone
 AES_ENDPROC(aes_ctr_encrypt)
 	.ltorg
 

arch/arm64/kernel/topology.c

@@ -11,6 +11,7 @@
  * for more details.
  */
 
+#include <linux/acpi.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/init.h>
@@ -209,7 +210,12 @@ static struct notifier_block init_cpu_capacity_notifier = {
 
 static int __init register_cpufreq_notifier(void)
 {
-	if (cap_parsing_failed)
+	/*
+	 * on ACPI-based systems we need to use the default cpu capacity
+	 * until we have the necessary code to parse the cpu capacity, so
+	 * skip registering cpufreq notifier.
+	 */
+	if (!acpi_disabled || cap_parsing_failed)
 		return -EINVAL;
 
 	if (!alloc_cpumask_var(&cpus_to_visit, GFP_KERNEL)) {

arch/parisc/include/asm/bitops.h

@@ -6,7 +6,7 @@
 #endif
 
 #include <linux/compiler.h>
-#include <asm/types.h>		/* for BITS_PER_LONG/SHIFT_PER_LONG */
+#include <asm/types.h>
 #include <asm/byteorder.h>
 #include <asm/barrier.h>
 #include <linux/atomic.h>
@@ -17,6 +17,12 @@
  * to include/asm-i386/bitops.h or kerneldoc
  */
 
+#if __BITS_PER_LONG == 64
+#define SHIFT_PER_LONG 6
+#else
+#define SHIFT_PER_LONG 5
+#endif
+
 #define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
 
 

arch/parisc/include/uapi/asm/bitsperlong.h

@@ -3,10 +3,8 @@
 
 #if defined(__LP64__)
 #define __BITS_PER_LONG 64
-#define SHIFT_PER_LONG 6
 #else
 #define __BITS_PER_LONG 32
-#define SHIFT_PER_LONG 5
 #endif
 
 #include <asm-generic/bitsperlong.h>

arch/parisc/include/uapi/asm/swab.h

@@ -1,6 +1,7 @@
 #ifndef _PARISC_SWAB_H
 #define _PARISC_SWAB_H
 
+#include <asm/bitsperlong.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
 
@@ -38,7 +39,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 }
 #define __arch_swab32 __arch_swab32
 
-#if BITS_PER_LONG > 32
+#if __BITS_PER_LONG > 32
 /*
 ** From "PA-RISC 2.0 Architecture", HP Professional Books.
 ** See Appendix I page 8 , "Endian Byte Swapping".
@@ -61,6 +62,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* BITS_PER_LONG > 32 */
+#endif /* __BITS_PER_LONG > 32 */
 
 #endif /* _PARISC_SWAB_H */

arch/powerpc/Kconfig

@@ -164,7 +164,6 @@ config PPC
 	select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE
 	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_KERNEL_GZIP
-	select HAVE_CC_STACKPROTECTOR
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -484,6 +483,7 @@ config RELOCATABLE
 	bool "Build a relocatable kernel"
 	depends on (PPC64 && !COMPILE_TEST) || (FLATMEM && (44x || FSL_BOOKE))
 	select NONSTATIC_KERNEL
+	select MODULE_REL_CRCS if MODVERSIONS
 	help
 	  This builds a kernel image that is capable of running at the
 	  location the kernel is loaded at. For ppc32, there is no any

arch/powerpc/include/asm/cpu_has_feature.h

@@ -23,7 +23,9 @@ static __always_inline bool cpu_has_feature(unsigned long feature)
 {
 	int i;
 
+#ifndef __clang__ /* clang can't cope with this */
 	BUILD_BUG_ON(!__builtin_constant_p(feature));
+#endif
 
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
 	if (!static_key_initialized) {

arch/powerpc/include/asm/mmu.h

@@ -160,7 +160,9 @@ static __always_inline bool mmu_has_feature(unsigned long feature)
 {
 	int i;
 
+#ifndef __clang__ /* clang can't cope with this */
 	BUILD_BUG_ON(!__builtin_constant_p(feature));
+#endif
 
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG
 	if (!static_key_initialized) {

arch/powerpc/include/asm/module.h

@@ -90,9 +90,5 @@ static inline int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sec
 }
 #endif
 
-#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
-#define ARCH_RELOCATES_KCRCTAB
-#define reloc_start PHYSICAL_START
-#endif
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MODULE_H */

arch/powerpc/include/asm/reg.h

@@ -649,9 +649,10 @@
 #define   SRR1_ISI_N_OR_G	0x10000000 /* ISI: Access is no-exec or G */
 #define   SRR1_ISI_PROT		0x08000000 /* ISI: Other protection fault */
 #define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
-#define   SRR1_WAKEMASK_P8	0x003c0000 /* reason for wakeup on POWER8 */
+#define   SRR1_WAKEMASK_P8	0x003c0000 /* reason for wakeup on POWER8 and 9 */
 #define   SRR1_WAKESYSERR	0x00300000 /* System error */
 #define   SRR1_WAKEEE		0x00200000 /* External interrupt */
+#define   SRR1_WAKEHVI		0x00240000 /* Hypervisor Virtualization Interrupt (P9) */
 #define   SRR1_WAKEMT		0x00280000 /* mtctrl */
 #define	  SRR1_WAKEHMI		0x00280000 /* Hypervisor maintenance */
 #define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */

arch/powerpc/include/asm/stackprotector.h

@@ -1,40 +0,0 @@
-/*
- * GCC stack protector support.
- *
- * Stack protector works by putting predefined pattern at the start of
- * the stack frame and verifying that it hasn't been overwritten when
- * returning from the function.  The pattern is called stack canary
- * and gcc expects it to be defined by a global variable called
- * "__stack_chk_guard" on PPC.  This unfortunately means that on SMP
- * we cannot have a different canary value per task.
- */
-
-#ifndef _ASM_STACKPROTECTOR_H
-#define _ASM_STACKPROTECTOR_H
-
-#include <linux/random.h>
-#include <linux/version.h>
-#include <asm/reg.h>
-
-extern unsigned long __stack_chk_guard;
-
-/*
- * Initialize the stackprotector canary value.
- *
- * NOTE: this must only be called from functions that never return,
- * and it must always be inlined.
- */
-static __always_inline void boot_init_stack_canary(void)
-{
-	unsigned long canary;
-
-	/* Try to get a semi random initial value. */
-	get_random_bytes(&canary, sizeof(canary));
-	canary ^= mftb();
-	canary ^= LINUX_VERSION_CODE;
-
-	current->stack_canary = canary;
-	__stack_chk_guard = current->stack_canary;
-}
-
-#endif	/* _ASM_STACKPROTECTOR_H */

arch/powerpc/include/asm/xics.h

@@ -44,6 +44,7 @@ static inline int icp_hv_init(void) { return -ENODEV; }
 
 #ifdef CONFIG_PPC_POWERNV
 extern int icp_opal_init(void);
+extern void icp_opal_flush_interrupt(void);
 #else
 static inline int icp_opal_init(void) { return -ENODEV; }
 #endif

arch/powerpc/kernel/Makefile

@@ -19,10 +19,6 @@ CFLAGS_init.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_btext.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_prom.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 
-# -fstack-protector triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-CFLAGS_prom_init.o += $(call cc-option, -fno-stack-protector)
-
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace early boot code
 CFLAGS_REMOVE_cputable.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)

arch/powerpc/kernel/asm-offsets.c

@@ -91,9 +91,6 @@ int main(void)
 	DEFINE(TI_livepatch_sp, offsetof(struct thread_info, livepatch_sp));
 #endif
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-	DEFINE(TSK_STACK_CANARY, offsetof(struct task_struct, stack_canary));
-#endif
 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
 #ifdef CONFIG_BOOKE

arch/powerpc/kernel/eeh_driver.c

@@ -545,7 +545,7 @@ static void *eeh_pe_detach_dev(void *data, void *userdata)
 static void *__eeh_clear_pe_frozen_state(void *data, void *flag)
 {
 	struct eeh_pe *pe = (struct eeh_pe *)data;
-	bool *clear_sw_state = flag;
+	bool clear_sw_state = *(bool *)flag;
 	int i, rc = 1;
 
 	for (i = 0; rc && i < 3; i++)

arch/powerpc/kernel/entry_32.S

@@ -674,11 +674,7 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_SPEFSCR,r0		/* restore SPEFSCR reg */
 END_FTR_SECTION_IFSET(CPU_FTR_SPE)
 #endif /* CONFIG_SPE */
-#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	lwz	r0,TSK_STACK_CANARY(r2)
-	lis	r4,__stack_chk_guard@ha
-	stw	r0,__stack_chk_guard@l(r4)
-#endif
+
 	lwz	r0,_CCR(r1)
 	mtcrf	0xFF,r0
 	/* r3-r12 are destroyed -- Cort */

arch/powerpc/kernel/module_64.c

@@ -286,14 +286,6 @@ static void dedotify_versions(struct modversion_info *vers,
 	for (end = (void *)vers + size; vers < end; vers++)
 		if (vers->name[0] == '.') {
 			memmove(vers->name, vers->name+1, strlen(vers->name));
-#ifdef ARCH_RELOCATES_KCRCTAB
-			/* The TOC symbol has no CRC computed. To avoid CRC
-			 * check failing, we must force it to the expected
-			 * value (see CRC check in module.c).
-			 */
-			if (!strcmp(vers->name, "TOC."))
-				vers->crc = -(unsigned long)reloc_start;
-#endif
 		}
 }
 

arch/powerpc/kernel/process.c

@@ -64,12 +64,6 @@
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-#include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
-EXPORT_SYMBOL(__stack_chk_guard);
-#endif
-
 /* Transactional Memory debug */
 #ifdef TM_DEBUG_SW
 #define TM_DEBUG(x...) printk(KERN_INFO x)

arch/powerpc/kernel/prom_init.c

@@ -2834,6 +2834,9 @@ static void __init prom_find_boot_cpu(void)
 
 	cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
 
+	if (!PHANDLE_VALID(cpu_pkg))
+		return;
+
 	prom_getprop(cpu_pkg, "reg", &rval, sizeof(rval));
 	prom.cpu = be32_to_cpu(rval);
 

arch/powerpc/mm/fault.c

@@ -253,8 +253,11 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (unlikely(debugger_fault_handler(regs)))
 		goto bail;
 
-	/* On a kernel SLB miss we can only check for a valid exception entry */
-	if (!user_mode(regs) && (address >= TASK_SIZE)) {
+	/*
+	 * The kernel should never take an execute fault nor should it
+	 * take a page fault to a kernel address.
+	 */
+	if (!user_mode(regs) && (is_exec || (address >= TASK_SIZE))) {
 		rc = SIGSEGV;
 		goto bail;
 	}
@@ -390,20 +393,6 @@ good_area:
 #endif /* CONFIG_8xx */
 
 	if (is_exec) {
-		/*
-		 * An execution fault + no execute ?
-		 *
-		 * On CPUs that don't have CPU_FTR_COHERENT_ICACHE we
-		 * deliberately create NX mappings, and use the fault to do the
-		 * cache flush. This is usually handled in hash_page_do_lazy_icache()
-		 * but we could end up here if that races with a concurrent PTE
-		 * update. In that case we need to fall through here to the VMA
-		 * check below.
-		 */
-		if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
-			(regs->msr & SRR1_ISI_N_OR_G))
-			goto bad_area;
-
 		/*
 		 * Allow execution from readable areas if the MMU does not
 		 * provide separate controls over reading and executing.

arch/powerpc/mm/pgtable-radix.c

@@ -65,7 +65,7 @@ int radix__map_kernel_page(unsigned long ea, unsigned long pa,
 		if (!pmdp)
 			return -ENOMEM;
 		if (map_page_size == PMD_SIZE) {
-			ptep = (pte_t *)pudp;
+			ptep = pmdp_ptep(pmdp);
 			goto set_the_pte;
 		}
 		ptep = pte_alloc_kernel(pmdp, ea);
@@ -90,7 +90,7 @@ int radix__map_kernel_page(unsigned long ea, unsigned long pa,
 		}
 		pmdp = pmd_offset(pudp, ea);
 		if (map_page_size == PMD_SIZE) {
-			ptep = (pte_t *)pudp;
+			ptep = pmdp_ptep(pmdp);
 			goto set_the_pte;
 		}
 		if (!pmd_present(*pmdp)) {

arch/powerpc/mm/tlb-radix.c

@@ -50,9 +50,7 @@ static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
 	for (set = 0; set < POWER9_TLB_SETS_RADIX ; set++) {
 		__tlbiel_pid(pid, set, ric);
 	}
-	if (cpu_has_feature(CPU_FTR_POWER9_DD1))
-		asm volatile(PPC_INVALIDATE_ERAT : : :"memory");
-	return;
+	asm volatile(PPC_INVALIDATE_ERAT "; isync" : : :"memory");
 }
 
 static inline void _tlbie_pid(unsigned long pid, unsigned long ric)
@@ -85,8 +83,6 @@ static inline void _tlbiel_va(unsigned long va, unsigned long pid,
 	asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
 		     : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory");
 	asm volatile("ptesync": : :"memory");
-	if (cpu_has_feature(CPU_FTR_POWER9_DD1))
-		asm volatile(PPC_INVALIDATE_ERAT : : :"memory");
 }
 
 static inline void _tlbie_va(unsigned long va, unsigned long pid,

arch/powerpc/platforms/powernv/smp.c

@@ -155,8 +155,10 @@ static void pnv_smp_cpu_kill_self(void)
 		wmask = SRR1_WAKEMASK_P8;
 
 	idle_states = pnv_get_supported_cpuidle_states();
+
 	/* We don't want to take decrementer interrupts while we are offline,
-	 * so clear LPCR:PECE1. We keep PECE2 enabled.
+	 * so clear LPCR:PECE1. We keep PECE2 (and LPCR_PECE_HVEE on P9)
+	 * enabled as to let IPIs in.
 	 */
 	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
 
@@ -206,8 +208,12 @@ static void pnv_smp_cpu_kill_self(void)
 		 * contains 0.
 		 */
 		if (((srr1 & wmask) == SRR1_WAKEEE) ||
+		    ((srr1 & wmask) == SRR1_WAKEHVI) ||
 		    (local_paca->irq_happened & PACA_IRQ_EE)) {
-			icp_native_flush_interrupt();
+			if (cpu_has_feature(CPU_FTR_ARCH_300))
+				icp_opal_flush_interrupt();
+			else
+				icp_native_flush_interrupt();
 		} else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
 			unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
 			asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
@@ -221,6 +227,8 @@ static void pnv_smp_cpu_kill_self(void)
 		if (srr1 && !generic_check_cpu_restart(cpu))
 			DBG("CPU%d Unexpected exit while offline !\n", cpu);
 	}
+
+	/* Re-enable decrementer interrupts */
 	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
 	DBG("CPU%d coming online...\n", cpu);
 }

arch/powerpc/sysdev/xics/icp-opal.c

@@ -120,18 +120,49 @@ static void icp_opal_cause_ipi(int cpu, unsigned long data)
 {
 	int hw_cpu = get_hard_smp_processor_id(cpu);
 
+	kvmppc_set_host_ipi(cpu, 1);
 	opal_int_set_mfrr(hw_cpu, IPI_PRIORITY);
 }
 
 static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id)
 {
-	int hw_cpu = hard_smp_processor_id();
+	int cpu = smp_processor_id();
 
-	opal_int_set_mfrr(hw_cpu, 0xff);
+	kvmppc_set_host_ipi(cpu, 0);
+	opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff);
 
 	return smp_ipi_demux();
 }
 
+/*
+ * Called when an interrupt is received on an off-line CPU to
+ * clear the interrupt, so that the CPU can go back to nap mode.
+ */
+void icp_opal_flush_interrupt(void)
+{
+	unsigned int xirr;
+	unsigned int vec;
+
+	do {
+		xirr = icp_opal_get_xirr();
+		vec = xirr & 0x00ffffff;
+		if (vec == XICS_IRQ_SPURIOUS)
+			break;
+		if (vec == XICS_IPI) {
+			/* Clear pending IPI */
+			int cpu = smp_processor_id();
+			kvmppc_set_host_ipi(cpu, 0);
+			opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff);
+		} else {
+			pr_err("XICS: hw interrupt 0x%x to offline cpu, "
+			       "disabling\n", vec);
+			xics_mask_unknown_vec(vec);
+		}
+
+		/* EOI the interrupt */
+	} while (opal_int_eoi(xirr) > 0);
+}
+
 #endif /* CONFIG_SMP */
 
 static const struct icp_ops icp_opal_ops = {

arch/s390/kernel/ptrace.c

@@ -963,6 +963,11 @@ static int s390_fpregs_set(struct task_struct *target,
 	if (target == current)
 		save_fpu_regs();
 
+	if (MACHINE_HAS_VX)
+		convert_vx_to_fp(fprs, target->thread.fpu.vxrs);
+	else
+		memcpy(&fprs, target->thread.fpu.fprs, sizeof(fprs));
+
 	/* If setting FPC, must validate it first. */
 	if (count > 0 && pos < offsetof(s390_fp_regs, fprs)) {
 		u32 ufpc[2] = { target->thread.fpu.fpc, 0 };
@@ -1067,6 +1072,9 @@ static int s390_vxrs_low_set(struct task_struct *target,
 	if (target == current)
 		save_fpu_regs();
 
+	for (i = 0; i < __NUM_VXRS_LOW; i++)
+		vxrs[i] = *((__u64 *)(target->thread.fpu.vxrs + i) + 1);
+
 	rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, vxrs, 0, -1);
 	if (rc == 0)
 		for (i = 0; i < __NUM_VXRS_LOW; i++)

arch/s390/mm/pgtable.c

@@ -202,7 +202,7 @@ static inline pgste_t ptep_xchg_start(struct mm_struct *mm,
 	return pgste;
 }
 
-static inline void ptep_xchg_commit(struct mm_struct *mm,
+static inline pte_t ptep_xchg_commit(struct mm_struct *mm,
 				    unsigned long addr, pte_t *ptep,
 				    pgste_t pgste, pte_t old, pte_t new)
 {
@@ -220,6 +220,7 @@ static inline void ptep_xchg_commit(struct mm_struct *mm,
 	} else {
 		*ptep = new;
 	}
+	return old;
 }
 
 pte_t ptep_xchg_direct(struct mm_struct *mm, unsigned long addr,
@@ -231,7 +232,7 @@ pte_t ptep_xchg_direct(struct mm_struct *mm, unsigned long addr,
 	preempt_disable();
 	pgste = ptep_xchg_start(mm, addr, ptep);
 	old = ptep_flush_direct(mm, addr, ptep);
-	ptep_xchg_commit(mm, addr, ptep, pgste, old, new);
+	old = ptep_xchg_commit(mm, addr, ptep, pgste, old, new);
 	preempt_enable();
 	return old;
 }
@@ -246,7 +247,7 @@ pte_t ptep_xchg_lazy(struct mm_struct *mm, unsigned long addr,
 	preempt_disable();
 	pgste = ptep_xchg_start(mm, addr, ptep);
 	old = ptep_flush_lazy(mm, addr, ptep);
-	ptep_xchg_commit(mm, addr, ptep, pgste, old, new);
+	old = ptep_xchg_commit(mm, addr, ptep, pgste, old, new);
 	preempt_enable();
 	return old;
 }

arch/sparc/include/asm/mmu_context_64.h

@@ -35,15 +35,15 @@ void __tsb_context_switch(unsigned long pgd_pa,
 static inline void tsb_context_switch(struct mm_struct *mm)
 {
 	__tsb_context_switch(__pa(mm->pgd),
-			     &mm->context.tsb_block[0],
+			     &mm->context.tsb_block[MM_TSB_BASE],
 #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
-			     (mm->context.tsb_block[1].tsb ?
-			      &mm->context.tsb_block[1] :
+			     (mm->context.tsb_block[MM_TSB_HUGE].tsb ?
+			      &mm->context.tsb_block[MM_TSB_HUGE] :
 			      NULL)
 #else
 			     NULL
 #endif
-			     , __pa(&mm->context.tsb_descr[0]));
+			     , __pa(&mm->context.tsb_descr[MM_TSB_BASE]));
 }
 
 void tsb_grow(struct mm_struct *mm,

arch/sparc/kernel/irq_64.c

@@ -1021,7 +1021,7 @@ static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
 	unsigned long order = get_order(size);
 	unsigned long p;
 
-	p = __get_free_pages(GFP_KERNEL, order);
+	p = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
 	if (!p) {
 		prom_printf("SUN4V: Error, cannot allocate queue.\n");
 		prom_halt();

arch/sparc/kernel/sstate.c

@@ -43,8 +43,8 @@ static const char poweroff_msg[32] __attribute__((aligned(32))) =
 	"Linux powering off";
 static const char rebooting_msg[32] __attribute__((aligned(32))) =
 	"Linux rebooting";
-static const char panicing_msg[32] __attribute__((aligned(32))) =
-	"Linux panicing";
+static const char panicking_msg[32] __attribute__((aligned(32))) =
+	"Linux panicking";
 
 static int sstate_reboot_call(struct notifier_block *np, unsigned long type, void *_unused)
 {
@@ -76,7 +76,7 @@ static struct notifier_block sstate_reboot_notifier = {
 
 static int sstate_panic_event(struct notifier_block *n, unsigned long event, void *ptr)
 {
-	do_set_sstate(HV_SOFT_STATE_TRANSITION, panicing_msg);
+	do_set_sstate(HV_SOFT_STATE_TRANSITION, panicking_msg);
 
 	return NOTIFY_DONE;
 }

arch/sparc/kernel/traps_64.c

@@ -2051,6 +2051,73 @@ void sun4v_resum_overflow(struct pt_regs *regs)
 	atomic_inc(&sun4v_resum_oflow_cnt);
 }
 
+/* Given a set of registers, get the virtual addressi that was being accessed
+ * by the faulting instructions at tpc.
+ */
+static unsigned long sun4v_get_vaddr(struct pt_regs *regs)
+{
+	unsigned int insn;
+
+	if (!copy_from_user(&insn, (void __user *)regs->tpc, 4)) {
+		return compute_effective_address(regs, insn,
+						 (insn >> 25) & 0x1f);
+	}
+	return 0;
+}
+
+/* Attempt to handle non-resumable errors generated from userspace.
+ * Returns true if the signal was handled, false otherwise.
+ */
+bool sun4v_nonresum_error_user_handled(struct pt_regs *regs,
+				  struct sun4v_error_entry *ent) {
+
+	unsigned int attrs = ent->err_attrs;
+
+	if (attrs & SUN4V_ERR_ATTRS_MEMORY) {
+		unsigned long addr = ent->err_raddr;
+		siginfo_t info;
+
+		if (addr == ~(u64)0) {
+			/* This seems highly unlikely to ever occur */
+			pr_emerg("SUN4V NON-RECOVERABLE ERROR: Memory error detected in unknown location!\n");
+		} else {
+			unsigned long page_cnt = DIV_ROUND_UP(ent->err_size,
+							      PAGE_SIZE);
+
+			/* Break the unfortunate news. */
+			pr_emerg("SUN4V NON-RECOVERABLE ERROR: Memory failed at %016lX\n",
+				 addr);
+			pr_emerg("SUN4V NON-RECOVERABLE ERROR:   Claiming %lu ages.\n",
+				 page_cnt);
+
+			while (page_cnt-- > 0) {
+				if (pfn_valid(addr >> PAGE_SHIFT))
+					get_page(pfn_to_page(addr >> PAGE_SHIFT));
+				addr += PAGE_SIZE;
+			}
+		}
+		info.si_signo = SIGKILL;
+		info.si_errno = 0;
+		info.si_trapno = 0;
+		force_sig_info(info.si_signo, &info, current);
+
+		return true;
+	}
+	if (attrs & SUN4V_ERR_ATTRS_PIO) {
+		siginfo_t info;
+
+		info.si_signo = SIGBUS;
+		info.si_code = BUS_ADRERR;
+		info.si_addr = (void __user *)sun4v_get_vaddr(regs);
+		force_sig_info(info.si_signo, &info, current);
+
+		return true;
+	}
+
+	/* Default to doing nothing */
+	return false;
+}
+
 /* We run with %pil set to PIL_NORMAL_MAX and PSTATE_IE enabled in %pstate.
  * Log the event, clear the first word of the entry, and die.
  */
@@ -2075,6 +2142,12 @@ void sun4v_nonresum_error(struct pt_regs *regs, unsigned long offset)
 
 	put_cpu();
 
+	if (!(regs->tstate & TSTATE_PRIV) &&
+	    sun4v_nonresum_error_user_handled(regs, &local_copy)) {
+		/* DON'T PANIC: This userspace error was handled. */
+		return;
+	}
+
 #ifdef CONFIG_PCI
 	/* Check for the special PCI poke sequence. */
 	if (pci_poke_in_progress && pci_poke_cpu == cpu) {

arch/x86/crypto/aesni-intel_glue.c

@@ -1085,9 +1085,9 @@ static void aesni_free_simds(void)
 		    aesni_simd_skciphers[i]; i++)
 		simd_skcipher_free(aesni_simd_skciphers[i]);
 
-	for (i = 0; i < ARRAY_SIZE(aesni_simd_skciphers2) &&
-		    aesni_simd_skciphers2[i].simd; i++)
-		simd_skcipher_free(aesni_simd_skciphers2[i].simd);
+	for (i = 0; i < ARRAY_SIZE(aesni_simd_skciphers2); i++)
+		if (aesni_simd_skciphers2[i].simd)
+			simd_skcipher_free(aesni_simd_skciphers2[i].simd);
 }
 
 static int __init aesni_init(void)
@@ -1168,7 +1168,7 @@ static int __init aesni_init(void)
 		simd = simd_skcipher_create_compat(algname, drvname, basename);
 		err = PTR_ERR(simd);
 		if (IS_ERR(simd))
-			goto unregister_simds;
+			continue;
 
 		aesni_simd_skciphers2[i].simd = simd;
 	}

arch/x86/events/intel/rapl.c

@@ -161,7 +161,13 @@ static u64 rapl_timer_ms;
 
 static inline struct rapl_pmu *cpu_to_rapl_pmu(unsigned int cpu)
 {
-	return rapl_pmus->pmus[topology_logical_package_id(cpu)];
+	unsigned int pkgid = topology_logical_package_id(cpu);
+
+	/*
+	 * The unsigned check also catches the '-1' return value for non
+	 * existent mappings in the topology map.
+	 */
+	return pkgid < rapl_pmus->maxpkg ? rapl_pmus->pmus[pkgid] : NULL;
 }
 
 static inline u64 rapl_read_counter(struct perf_event *event)
@@ -402,6 +408,8 @@ static int rapl_pmu_event_init(struct perf_event *event)
 
 	/* must be done before validate_group */
 	pmu = cpu_to_rapl_pmu(event->cpu);
+	if (!pmu)
+		return -EINVAL;
 	event->cpu = pmu->cpu;
 	event->pmu_private = pmu;
 	event->hw.event_base = msr;
@@ -585,6 +593,20 @@ static int rapl_cpu_online(unsigned int cpu)
 	struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
 	int target;
 
+	if (!pmu) {
+		pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu));
+		if (!pmu)
+			return -ENOMEM;
+
+		raw_spin_lock_init(&pmu->lock);
+		INIT_LIST_HEAD(&pmu->active_list);
+		pmu->pmu = &rapl_pmus->pmu;
+		pmu->timer_interval = ms_to_ktime(rapl_timer_ms);
+		rapl_hrtimer_init(pmu);
+
+		rapl_pmus->pmus[topology_logical_package_id(cpu)] = pmu;
+	}
+
 	/*
 	 * Check if there is an online cpu in the package which collects rapl
 	 * events already.
@@ -598,27 +620,6 @@ static int rapl_cpu_online(unsigned int cpu)
 	return 0;
 }
 
-static int rapl_cpu_prepare(unsigned int cpu)
-{
-	struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
-
-	if (pmu)
-		return 0;
-
-	pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu));
-	if (!pmu)
-		return -ENOMEM;
-
-	raw_spin_lock_init(&pmu->lock);
-	INIT_LIST_HEAD(&pmu->active_list);
-	pmu->pmu = &rapl_pmus->pmu;
-	pmu->timer_interval = ms_to_ktime(rapl_timer_ms);
-	pmu->cpu = -1;
-	rapl_hrtimer_init(pmu);
-	rapl_pmus->pmus[topology_logical_package_id(cpu)] = pmu;
-	return 0;
-}
-
 static int rapl_check_hw_unit(bool apply_quirk)
 {
 	u64 msr_rapl_power_unit_bits;
@@ -803,29 +804,21 @@ static int __init rapl_pmu_init(void)
 	/*
 	 * Install callbacks. Core will call them for each online cpu.
 	 */
-
-	ret = cpuhp_setup_state(CPUHP_PERF_X86_RAPL_PREP, "perf/x86/rapl:prepare",
-				rapl_cpu_prepare, NULL);
-	if (ret)
-		goto out;
-
 	ret = cpuhp_setup_state(CPUHP_AP_PERF_X86_RAPL_ONLINE,
 				"perf/x86/rapl:online",
 				rapl_cpu_online, rapl_cpu_offline);
 	if (ret)
-		goto out1;
+		goto out;
 
 	ret = perf_pmu_register(&rapl_pmus->pmu, "power", -1);
 	if (ret)
-		goto out2;
+		goto out1;
 
 	rapl_advertise();
 	return 0;
 
-out2:
-	cpuhp_remove_state(CPUHP_AP_PERF_X86_RAPL_ONLINE);
 out1:
-	cpuhp_remove_state(CPUHP_PERF_X86_RAPL_PREP);
+	cpuhp_remove_state(CPUHP_AP_PERF_X86_RAPL_ONLINE);
 out:
 	pr_warn("Initialization failed (%d), disabled\n", ret);
 	cleanup_rapl_pmus();
@@ -836,7 +829,6 @@ module_init(rapl_pmu_init);
 static void __exit intel_rapl_exit(void)
 {
 	cpuhp_remove_state_nocalls(CPUHP_AP_PERF_X86_RAPL_ONLINE);
-	cpuhp_remove_state_nocalls(CPUHP_PERF_X86_RAPL_PREP);
 	perf_pmu_unregister(&rapl_pmus->pmu);
 	cleanup_rapl_pmus();
 }

arch/x86/events/intel/uncore.c

@@ -100,7 +100,13 @@ ssize_t uncore_event_show(struct kobject *kobj,
 
 struct intel_uncore_box *uncore_pmu_to_box(struct intel_uncore_pmu *pmu, int cpu)
 {
-	return pmu->boxes[topology_logical_package_id(cpu)];
+	unsigned int pkgid = topology_logical_package_id(cpu);
+
+	/*
+	 * The unsigned check also catches the '-1' return value for non
+	 * existent mappings in the topology map.
+	 */
+	return pkgid < max_packages ? pmu->boxes[pkgid] : NULL;
 }
 
 u64 uncore_msr_read_counter(struct intel_uncore_box *box, struct perf_event *event)
@@ -764,30 +770,6 @@ static void uncore_pmu_unregister(struct intel_uncore_pmu *pmu)
 	pmu->registered = false;
 }
 
-static void __uncore_exit_boxes(struct intel_uncore_type *type, int cpu)
-{
-	struct intel_uncore_pmu *pmu = type->pmus;
-	struct intel_uncore_box *box;
-	int i, pkg;
-
-	if (pmu) {
-		pkg = topology_physical_package_id(cpu);
-		for (i = 0; i < type->num_boxes; i++, pmu++) {
-			box = pmu->boxes[pkg];
-			if (box)
-				uncore_box_exit(box);
-		}
-	}
-}
-
-static void uncore_exit_boxes(void *dummy)
-{
-	struct intel_uncore_type **types;
-
-	for (types = uncore_msr_uncores; *types; types++)
-		__uncore_exit_boxes(*types++, smp_processor_id());
-}
-
 static void uncore_free_boxes(struct intel_uncore_pmu *pmu)
 {
 	int pkg;
@@ -1058,86 +1040,6 @@ static void uncore_pci_exit(void)
 	}
 }
 
-static int uncore_cpu_dying(unsigned int cpu)
-{
-	struct intel_uncore_type *type, **types = uncore_msr_uncores;
-	struct intel_uncore_pmu *pmu;
-	struct intel_uncore_box *box;
-	int i, pkg;
-
-	pkg = topology_logical_package_id(cpu);
-	for (; *types; types++) {
-		type = *types;
-		pmu = type->pmus;
-		for (i = 0; i < type->num_boxes; i++, pmu++) {
-			box = pmu->boxes[pkg];
-			if (box && atomic_dec_return(&box->refcnt) == 0)
-				uncore_box_exit(box);
-		}
-	}
-	return 0;
-}
-
-static int first_init;
-
-static int uncore_cpu_starting(unsigned int cpu)
-{
-	struct intel_uncore_type *type, **types = uncore_msr_uncores;
-	struct intel_uncore_pmu *pmu;
-	struct intel_uncore_box *box;
-	int i, pkg, ncpus = 1;
-
-	if (first_init) {
-		/*
-		 * On init we get the number of online cpus in the package
-		 * and set refcount for all of them.
-		 */
-		ncpus = cpumask_weight(topology_core_cpumask(cpu));
-	}
-
-	pkg = topology_logical_package_id(cpu);
-	for (; *types; types++) {
-		type = *types;
-		pmu = type->pmus;
-		for (i = 0; i < type->num_boxes; i++, pmu++) {
-			box = pmu->boxes[pkg];
-			if (!box)
-				continue;
-			/* The first cpu on a package activates the box */
-			if (atomic_add_return(ncpus, &box->refcnt) == ncpus)
-				uncore_box_init(box);
-		}
-	}
-
-	return 0;
-}
-
-static int uncore_cpu_prepare(unsigned int cpu)
-{
-	struct intel_uncore_type *type, **types = uncore_msr_uncores;
-	struct intel_uncore_pmu *pmu;
-	struct intel_uncore_box *box;
-	int i, pkg;
-
-	pkg = topology_logical_package_id(cpu);
-	for (; *types; types++) {
-		type = *types;
-		pmu = type->pmus;
-		for (i = 0; i < type->num_boxes; i++, pmu++) {
-			if (pmu->boxes[pkg])
-				continue;
-			/* First cpu of a package allocates the box */
-			box = uncore_alloc_box(type, cpu_to_node(cpu));
-			if (!box)
-				return -ENOMEM;
-			box->pmu = pmu;
-			box->pkgid = pkg;
-			pmu->boxes[pkg] = box;
-		}
-	}
-	return 0;
-}
-
 static void uncore_change_type_ctx(struct intel_uncore_type *type, int old_cpu,
 				   int new_cpu)
 {
@@ -1177,12 +1079,14 @@ static void uncore_change_context(struct intel_uncore_type **uncores,
 
 static int uncore_event_cpu_offline(unsigned int cpu)
 {
-	int target;
+	struct intel_uncore_type *type, **types = uncore_msr_uncores;
+	struct intel_uncore_pmu *pmu;
+	struct intel_uncore_box *box;
+	int i, pkg, target;
 
 	/* Check if exiting cpu is used for collecting uncore events */
 	if (!cpumask_test_and_clear_cpu(cpu, &uncore_cpu_mask))
-		return 0;
-
+		goto unref;
 	/* Find a new cpu to collect uncore events */
 	target = cpumask_any_but(topology_core_cpumask(cpu), cpu);
 
@@ -1194,12 +1098,82 @@ static int uncore_event_cpu_offline(unsigned int cpu)
 
 	uncore_change_context(uncore_msr_uncores, cpu, target);
 	uncore_change_context(uncore_pci_uncores, cpu, target);
+
+unref:
+	/* Clear the references */
+	pkg = topology_logical_package_id(cpu);
+	for (; *types; types++) {
+		type = *types;
+		pmu = type->pmus;
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			box = pmu->boxes[pkg];
+			if (box && atomic_dec_return(&box->refcnt) == 0)
+				uncore_box_exit(box);
+		}
+	}
 	return 0;
 }
 
+static int allocate_boxes(struct intel_uncore_type **types,
+			 unsigned int pkg, unsigned int cpu)
+{
+	struct intel_uncore_box *box, *tmp;
+	struct intel_uncore_type *type;
+	struct intel_uncore_pmu *pmu;
+	LIST_HEAD(allocated);
+	int i;
+
+	/* Try to allocate all required boxes */
+	for (; *types; types++) {
+		type = *types;
+		pmu = type->pmus;
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			if (pmu->boxes[pkg])
+				continue;
+			box = uncore_alloc_box(type, cpu_to_node(cpu));
+			if (!box)
+				goto cleanup;
+			box->pmu = pmu;
+			box->pkgid = pkg;
+			list_add(&box->active_list, &allocated);
+		}
+	}
+	/* Install them in the pmus */
+	list_for_each_entry_safe(box, tmp, &allocated, active_list) {
+		list_del_init(&box->active_list);
+		box->pmu->boxes[pkg] = box;
+	}
+	return 0;
+
+cleanup:
+	list_for_each_entry_safe(box, tmp, &allocated, active_list) {
+		list_del_init(&box->active_list);
+		kfree(box);
+	}
+	return -ENOMEM;
+}
+
 static int uncore_event_cpu_online(unsigned int cpu)
 {
-	int target;
+	struct intel_uncore_type *type, **types = uncore_msr_uncores;
+	struct intel_uncore_pmu *pmu;
+	struct intel_uncore_box *box;
+	int i, ret, pkg, target;
+
+	pkg = topology_logical_package_id(cpu);
+	ret = allocate_boxes(types, pkg, cpu);
+	if (ret)
+		return ret;
+
+	for (; *types; types++) {
+		type = *types;
+		pmu = type->pmus;
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			box = pmu->boxes[pkg];
+			if (!box && atomic_inc_return(&box->refcnt) == 1)
+				uncore_box_init(box);
+		}
+	}
 
 	/*
 	 * Check if there is an online cpu in the package
@@ -1389,38 +1363,16 @@ static int __init intel_uncore_init(void)
 	if (cret && pret)
 		return -ENODEV;
 
-	/*
-	 * Install callbacks. Core will call them for each online cpu.
-	 *
-	 * The first online cpu of each package allocates and takes
-	 * the refcounts for all other online cpus in that package.
-	 * If msrs are not enabled no allocation is required and
-	 * uncore_cpu_prepare() is not called for each online cpu.
-	 */
-	if (!cret) {
-	       ret = cpuhp_setup_state(CPUHP_PERF_X86_UNCORE_PREP,
-				       "perf/x86/intel/uncore:prepare",
-				       uncore_cpu_prepare, NULL);
-		if (ret)
-			goto err;
-	} else {
-		cpuhp_setup_state_nocalls(CPUHP_PERF_X86_UNCORE_PREP,
-					  "perf/x86/intel/uncore:prepare",
-					  uncore_cpu_prepare, NULL);
-	}
-	first_init = 1;
-	cpuhp_setup_state(CPUHP_AP_PERF_X86_UNCORE_STARTING,
-			  "perf/x86/uncore:starting",
-			  uncore_cpu_starting, uncore_cpu_dying);
-	first_init = 0;
-	cpuhp_setup_state(CPUHP_AP_PERF_X86_UNCORE_ONLINE,
-			  "perf/x86/uncore:online",
-			  uncore_event_cpu_online, uncore_event_cpu_offline);
+	/* Install hotplug callbacks to setup the targets for each package */
+	ret = cpuhp_setup_state(CPUHP_AP_PERF_X86_UNCORE_ONLINE,
+				"perf/x86/intel/uncore:online",
+				uncore_event_cpu_online,
+				uncore_event_cpu_offline);
+	if (ret)
+		goto err;
 	return 0;
 
 err:
-	/* Undo box->init_box() */
-	on_each_cpu_mask(&uncore_cpu_mask, uncore_exit_boxes, NULL, 1);
 	uncore_types_exit(uncore_msr_uncores);
 	uncore_pci_exit();
 	return ret;
@@ -1429,9 +1381,7 @@ module_init(intel_uncore_init);
 
 static void __exit intel_uncore_exit(void)
 {
-	cpuhp_remove_state_nocalls(CPUHP_AP_PERF_X86_UNCORE_ONLINE);
-	cpuhp_remove_state_nocalls(CPUHP_AP_PERF_X86_UNCORE_STARTING);
-	cpuhp_remove_state_nocalls(CPUHP_PERF_X86_UNCORE_PREP);
+	cpuhp_remove_state(CPUHP_AP_PERF_X86_UNCORE_ONLINE);
 	uncore_types_exit(uncore_msr_uncores);
 	uncore_pci_exit();
 }

arch/x86/include/asm/microcode.h

@@ -140,6 +140,7 @@ extern void __init load_ucode_bsp(void);
 extern void load_ucode_ap(void);
 void reload_early_microcode(void);
 extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
+extern bool initrd_gone;
 #else
 static inline int __init microcode_init(void)			{ return 0; };
 static inline void __init load_ucode_bsp(void)			{ }

arch/x86/include/asm/processor.h

@@ -104,6 +104,7 @@ struct cpuinfo_x86 {
 	__u8			x86_phys_bits;
 	/* CPUID returned core id bits: */
 	__u8			x86_coreid_bits;
+	__u8			cu_id;
 	/* Max extended CPUID function supported: */
 	__u32			extended_cpuid_level;
 	/* Maximum supported CPUID level, -1=no CPUID: */

arch/x86/kernel/apic/io_apic.c

@@ -1875,7 +1875,6 @@ static struct irq_chip ioapic_chip __read_mostly = {
 	.irq_ack		= irq_chip_ack_parent,
 	.irq_eoi		= ioapic_ack_level,
 	.irq_set_affinity	= ioapic_set_affinity,
-	.irq_retrigger		= irq_chip_retrigger_hierarchy,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -1887,7 +1886,6 @@ static struct irq_chip ioapic_ir_chip __read_mostly = {
 	.irq_ack		= irq_chip_ack_parent,
 	.irq_eoi		= ioapic_ir_ack_level,
 	.irq_set_affinity	= ioapic_set_affinity,
-	.irq_retrigger		= irq_chip_retrigger_hierarchy,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -2117,6 +2115,7 @@ static inline void __init check_timer(void)
 			if (idx != -1 && irq_trigger(idx))
 				unmask_ioapic_irq(irq_get_chip_data(0));
 		}
+		irq_domain_deactivate_irq(irq_data);
 		irq_domain_activate_irq(irq_data);
 		if (timer_irq_works()) {
 			if (disable_timer_pin_1 > 0)
@@ -2138,6 +2137,7 @@ static inline void __init check_timer(void)
 		 * legacy devices should be connected to IO APIC #0
 		 */
 		replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
+		irq_domain_deactivate_irq(irq_data);
 		irq_domain_activate_irq(irq_data);
 		legacy_pic->unmask(0);
 		if (timer_irq_works()) {

arch/x86/kernel/cpu/amd.c

@@ -309,8 +309,22 @@ static void amd_get_topology(struct cpuinfo_x86 *c)
 
 	/* get information required for multi-node processors */
 	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
+		u32 eax, ebx, ecx, edx;
 
-		node_id = cpuid_ecx(0x8000001e) & 7;
+		cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
+
+		node_id  = ecx & 0xff;
+		smp_num_siblings = ((ebx >> 8) & 0xff) + 1;
+
+		if (c->x86 == 0x15)
+			c->cu_id = ebx & 0xff;
+
+		if (c->x86 >= 0x17) {
+			c->cpu_core_id = ebx & 0xff;
+
+			if (smp_num_siblings > 1)
+				c->x86_max_cores /= smp_num_siblings;
+		}
 
 		/*
 		 * We may have multiple LLCs if L3 caches exist, so check if we

arch/x86/kernel/cpu/common.c

@@ -1015,6 +1015,7 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	c->x86_model_id[0] = '\0';  /* Unset */
 	c->x86_max_cores = 1;
 	c->x86_coreid_bits = 0;
+	c->cu_id = 0xff;
 #ifdef CONFIG_X86_64
 	c->x86_clflush_size = 64;
 	c->x86_phys_bits = 36;

arch/x86/kernel/cpu/mcheck/mce.c

@@ -1373,20 +1373,15 @@ static unsigned long mce_adjust_timer_default(unsigned long interval)
 
 static unsigned long (*mce_adjust_timer)(unsigned long interval) = mce_adjust_timer_default;
 
-static void __restart_timer(struct timer_list *t, unsigned long interval)
+static void __start_timer(struct timer_list *t, unsigned long interval)
 {
 	unsigned long when = jiffies + interval;
 	unsigned long flags;
 
 	local_irq_save(flags);
 
-	if (timer_pending(t)) {
-		if (time_before(when, t->expires))
-			mod_timer(t, when);
-	} else {
-		t->expires = round_jiffies(when);
-		add_timer_on(t, smp_processor_id());
-	}
+	if (!timer_pending(t) || time_before(when, t->expires))
+		mod_timer(t, round_jiffies(when));
 
 	local_irq_restore(flags);
 }
@@ -1421,7 +1416,7 @@ static void mce_timer_fn(unsigned long data)
 
 done:
 	__this_cpu_write(mce_next_interval, iv);
-	__restart_timer(t, iv);
+	__start_timer(t, iv);
 }
 
 /*
@@ -1432,7 +1427,7 @@ void mce_timer_kick(unsigned long interval)
 	struct timer_list *t = this_cpu_ptr(&mce_timer);
 	unsigned long iv = __this_cpu_read(mce_next_interval);
 
-	__restart_timer(t, interval);
+	__start_timer(t, interval);
 
 	if (interval < iv)
 		__this_cpu_write(mce_next_interval, interval);
@@ -1779,17 +1774,15 @@ static void __mcheck_cpu_clear_vendor(struct cpuinfo_x86 *c)
 	}
 }
 
-static void mce_start_timer(unsigned int cpu, struct timer_list *t)
+static void mce_start_timer(struct timer_list *t)
 {
 	unsigned long iv = check_interval * HZ;
 
 	if (mca_cfg.ignore_ce || !iv)
 		return;
 
-	per_cpu(mce_next_interval, cpu) = iv;
-
-	t->expires = round_jiffies(jiffies + iv);
-	add_timer_on(t, cpu);
+	this_cpu_write(mce_next_interval, iv);
+	__start_timer(t, iv);
 }
 
 static void __mcheck_cpu_setup_timer(void)
@@ -1806,7 +1799,7 @@ static void __mcheck_cpu_init_timer(void)
 	unsigned int cpu = smp_processor_id();
 
 	setup_pinned_timer(t, mce_timer_fn, cpu);
-	mce_start_timer(cpu, t);
+	mce_start_timer(t);
 }
 
 /* Handle unconfigured int18 (should never happen) */
@@ -2566,7 +2559,7 @@ static int mce_cpu_dead(unsigned int cpu)
 
 static int mce_cpu_online(unsigned int cpu)
 {
-	struct timer_list *t = &per_cpu(mce_timer, cpu);
+	struct timer_list *t = this_cpu_ptr(&mce_timer);
 	int ret;
 
 	mce_device_create(cpu);
@@ -2577,13 +2570,13 @@ static int mce_cpu_online(unsigned int cpu)
 		return ret;
 	}
 	mce_reenable_cpu();
-	mce_start_timer(cpu, t);
+	mce_start_timer(t);
 	return 0;
 }
 
 static int mce_cpu_pre_down(unsigned int cpu)
 {
-	struct timer_list *t = &per_cpu(mce_timer, cpu);
+	struct timer_list *t = this_cpu_ptr(&mce_timer);
 
 	mce_disable_cpu();
 	del_timer_sync(t);

arch/x86/kernel/cpu/microcode/amd.c

@@ -384,8 +384,9 @@ void load_ucode_amd_ap(unsigned int family)
 reget:
 		if (!get_builtin_microcode(&cp, family)) {
 #ifdef CONFIG_BLK_DEV_INITRD
-			cp = find_cpio_data(ucode_path, (void *)initrd_start,
-					    initrd_end - initrd_start, NULL);
+			if (!initrd_gone)
+				cp = find_cpio_data(ucode_path, (void *)initrd_start,
+						    initrd_end - initrd_start, NULL);
 #endif
 			if (!(cp.data && cp.size)) {
 				/*

arch/x86/kernel/cpu/microcode/core.c

@@ -46,6 +46,8 @@
 static struct microcode_ops	*microcode_ops;
 static bool dis_ucode_ldr = true;
 
+bool initrd_gone;
+
 LIST_HEAD(microcode_cache);
 
 /*
@@ -190,21 +192,24 @@ void load_ucode_ap(void)
 static int __init save_microcode_in_initrd(void)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
+	int ret = -EINVAL;
 
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
 		if (c->x86 >= 6)
-			return save_microcode_in_initrd_intel();
+			ret = save_microcode_in_initrd_intel();
 		break;
 	case X86_VENDOR_AMD:
 		if (c->x86 >= 0x10)
-			return save_microcode_in_initrd_amd(c->x86);
+			ret = save_microcode_in_initrd_amd(c->x86);
 		break;
 	default:
 		break;
 	}
 
-	return -EINVAL;
+	initrd_gone = true;
+
+	return ret;
 }
 
 struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
@@ -247,9 +252,16 @@ struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
 	 * has the virtual address of the beginning of the initrd. It also
 	 * possibly relocates the ramdisk. In either case, initrd_start contains
 	 * the updated address so use that instead.
+	 *
+	 * initrd_gone is for the hotplug case where we've thrown out initrd
+	 * already.
 	 */
-	if (!use_pa && initrd_start)
-		start = initrd_start;
+	if (!use_pa) {
+		if (initrd_gone)
+			return (struct cpio_data){ NULL, 0, "" };
+		if (initrd_start)
+			start = initrd_start;
+	}
 
 	return find_cpio_data(path, (void *)start, size, NULL);
 #else /* !CONFIG_BLK_DEV_INITRD */

arch/x86/kernel/cpu/microcode/intel.c

@@ -41,7 +41,7 @@
 
 static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin";
 
-/* Current microcode patch used in early patching */
+/* Current microcode patch used in early patching on the APs. */
 struct microcode_intel *intel_ucode_patch;
 
 static inline bool cpu_signatures_match(unsigned int s1, unsigned int p1,
@@ -607,12 +607,6 @@ int __init save_microcode_in_initrd_intel(void)
 	struct ucode_cpu_info uci;
 	struct cpio_data cp;
 
-	/*
-	 * AP loading didn't find any microcode patch, no need to save anything.
-	 */
-	if (!intel_ucode_patch || IS_ERR(intel_ucode_patch))
-		return 0;
-
 	if (!load_builtin_intel_microcode(&cp))
 		cp = find_microcode_in_initrd(ucode_path, false);
 
@@ -628,7 +622,6 @@ int __init save_microcode_in_initrd_intel(void)
 	return 0;
 }
 
-
 /*
  * @res_patch, output: a pointer to the patch we found.
  */

arch/x86/kernel/fpu/core.c

@@ -9,6 +9,7 @@
 #include <asm/fpu/regset.h>
 #include <asm/fpu/signal.h>
 #include <asm/fpu/types.h>
+#include <asm/fpu/xstate.h>
 #include <asm/traps.h>
 
 #include <linux/hardirq.h>
@@ -183,7 +184,8 @@ void fpstate_init(union fpregs_state *state)
 	 * it will #GP. Make sure it is replaced after the memset().
 	 */
 	if (static_cpu_has(X86_FEATURE_XSAVES))
-		state->xsave.header.xcomp_bv = XCOMP_BV_COMPACTED_FORMAT;
+		state->xsave.header.xcomp_bv = XCOMP_BV_COMPACTED_FORMAT |
+					       xfeatures_mask;
 
 	if (static_cpu_has(X86_FEATURE_FXSR))
 		fpstate_init_fxstate(&state->fxsave);

arch/x86/kernel/hpet.c

@@ -352,6 +352,7 @@ static int hpet_resume(struct clock_event_device *evt, int timer)
 	} else {
 		struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 
+		irq_domain_deactivate_irq(irq_get_irq_data(hdev->irq));
 		irq_domain_activate_irq(irq_get_irq_data(hdev->irq));
 		disable_irq(hdev->irq);
 		irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));

arch/x86/kernel/smpboot.c

@@ -433,9 +433,15 @@ static bool match_smt(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 		int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
 
 		if (c->phys_proc_id == o->phys_proc_id &&
-		    per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2) &&
-		    c->cpu_core_id == o->cpu_core_id)
-			return topology_sane(c, o, "smt");
+		    per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2)) {
+			if (c->cpu_core_id == o->cpu_core_id)
+				return topology_sane(c, o, "smt");
+
+			if ((c->cu_id != 0xff) &&
+			    (o->cu_id != 0xff) &&
+			    (c->cu_id == o->cu_id))
+				return topology_sane(c, o, "smt");
+		}
 
 	} else if (c->phys_proc_id == o->phys_proc_id &&
 		   c->cpu_core_id == o->cpu_core_id) {

arch/x86/kernel/tsc.c

@@ -1356,6 +1356,9 @@ void __init tsc_init(void)
 		(unsigned long)cpu_khz / 1000,
 		(unsigned long)cpu_khz % 1000);
 
+	/* Sanitize TSC ADJUST before cyc2ns gets initialized */
+	tsc_store_and_check_tsc_adjust(true);
+
 	/*
 	 * Secondary CPUs do not run through tsc_init(), so set up
 	 * all the scale factors for all CPUs, assuming the same
@@ -1386,8 +1389,6 @@ void __init tsc_init(void)
 
 	if (unsynchronized_tsc())
 		mark_tsc_unstable("TSCs unsynchronized");
-	else
-		tsc_store_and_check_tsc_adjust(true);
 
 	check_system_tsc_reliable();
 

arch/x86/kernel/tsc_sync.c

@@ -286,13 +286,6 @@ void check_tsc_sync_source(int cpu)
 	if (unsynchronized_tsc())
 		return;
 
-	if (tsc_clocksource_reliable) {
-		if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING)
-			pr_info(
-			"Skipped synchronization checks as TSC is reliable.\n");
-		return;
-	}
-
 	/*
 	 * Set the maximum number of test runs to
 	 *  1 if the CPU does not provide the TSC_ADJUST MSR
@@ -380,14 +373,19 @@ void check_tsc_sync_target(void)
 	int cpus = 2;
 
 	/* Also aborts if there is no TSC. */
-	if (unsynchronized_tsc() || tsc_clocksource_reliable)
+	if (unsynchronized_tsc())
 		return;
 
 	/*
 	 * Store, verify and sanitize the TSC adjust register. If
 	 * successful skip the test.
+	 *
+	 * The test is also skipped when the TSC is marked reliable. This
+	 * is true for SoCs which have no fallback clocksource. On these
+	 * SoCs the TSC is frequency synchronized, but still the TSC ADJUST
+	 * register might have been wreckaged by the BIOS..
 	 */
-	if (tsc_store_and_check_tsc_adjust(false)) {
+	if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) {
 		atomic_inc(&skip_test);
 		return;
 	}

arch/x86/kvm/x86.c

@@ -3182,6 +3182,7 @@ static void fill_xsave(u8 *dest, struct kvm_vcpu *vcpu)
 	memcpy(dest, xsave, XSAVE_HDR_OFFSET);
 
 	/* Set XSTATE_BV */
+	xstate_bv &= vcpu->arch.guest_supported_xcr0 | XFEATURE_MASK_FPSSE;
 	*(u64 *)(dest + XSAVE_HDR_OFFSET) = xstate_bv;
 
 	/*

arch/x86/mm/dump_pagetables.c

@@ -15,6 +15,7 @@
 #include <linux/debugfs.h>
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 
 #include <asm/pgtable.h>
@@ -406,6 +407,7 @@ static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
 		} else
 			note_page(m, &st, __pgprot(0), 1);
 
+		cond_resched();
 		start++;
 	}
 

arch/x86/platform/efi/efi_64.c

@@ -268,6 +268,22 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 
 	efi_scratch.use_pgd = true;
 
+	/*
+	 * Certain firmware versions are way too sentimential and still believe
+	 * they are exclusive and unquestionable owners of the first physical page,
+	 * even though they explicitly mark it as EFI_CONVENTIONAL_MEMORY
+	 * (but then write-access it later during SetVirtualAddressMap()).
+	 *
+	 * Create a 1:1 mapping for this page, to avoid triple faults during early
+	 * boot with such firmware. We are free to hand this page to the BIOS,
+	 * as trim_bios_range() will reserve the first page and isolate it away
+	 * from memory allocators anyway.
+	 */
+	if (kernel_map_pages_in_pgd(pgd, 0x0, 0x0, 1, _PAGE_RW)) {
+		pr_err("Failed to create 1:1 mapping for the first page!\n");
+		return 1;
+	}
+
 	/*
 	 * When making calls to the firmware everything needs to be 1:1
 	 * mapped and addressable with 32-bit pointers. Map the kernel

arch/xtensa/kernel/setup.c

@@ -419,7 +419,7 @@ subsys_initcall(topology_init);
 
 void cpu_reset(void)
 {
-#if XCHAL_HAVE_PTP_MMU
+#if XCHAL_HAVE_PTP_MMU && IS_ENABLED(CONFIG_MMU)
 	local_irq_disable();
 	/*
 	 * We have full MMU: all autoload ways, ways 7, 8 and 9 of DTLB must