Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Resync, and we need all the fancy new drm_mm stuff to implement more
efficient evict algorithms for softpin.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

CREDITS

@@ -9,7 +9,7 @@
 			Linus
 ----------
 
-M: Matt Mackal
+N: Matt Mackal
 E: mpm@selenic.com
 D: SLOB slab allocator
 
@@ -1910,7 +1910,7 @@ S: Ra'annana, Israel
 
 N: Andi Kleen
 E: andi@firstfloor.org
-U: http://www.halobates.de
+W: http://www.halobates.de
 D: network, x86, NUMA, various hacks
 S: Schwalbenstr. 96
 S: 85551 Ottobrunn
@@ -2089,8 +2089,8 @@ D: ST Microelectronics SPEAr13xx PCI host bridge driver
 D: Synopsys Designware PCI host bridge driver
 
 N: Gabor Kuti
-M: seasons@falcon.sch.bme.hu
-M: seasons@makosteszta.sote.hu
+E: seasons@falcon.sch.bme.hu
+E: seasons@makosteszta.sote.hu
 D: Original author of software suspend
 
 N: Jaroslav Kysela

Documentation/ABI/testing/sysfs-devices-system-ibm-rtl

@@ -1,4 +1,4 @@
-What:           state
+What:           /sys/devices/system/ibm_rtl/state
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>
@@ -10,7 +10,7 @@ Description:    The state file allows a means by which to change in and
 Users:          The ibm-prtm userspace daemon uses this interface.
 
 
-What:           version
+What:           /sys/devices/system/ibm_rtl/version
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>

Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt

@@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
 - Video port 0 for RGB input
 - Video port 1 for VGA output
 
+Optional properties:
+- vdd-supply: Power supply for DAC
 
 Example
 -------

Documentation/devicetree/bindings/display/ti/ti,tfp410.txt → Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt

@@ -6,10 +6,15 @@ Required properties:
 
 Optional properties:
 - powerdown-gpios: power-down gpio
+- reg: I2C address. If and only if present the device node
+       should be placed into the i2c controller node where the
+       tfp410 i2c is connected to.
 
 Required nodes:
-- Video port 0 for DPI input
-- Video port 1 for DVI output
+- Video port 0 for DPI input [1].
+- Video port 1 for DVI output [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example
 -------

Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt

@@ -1,7 +1,9 @@
 Device-Tree bindings for tilcdc DRM driver
 
 Required properties:
- - compatible: value should be "ti,am33xx-tilcdc".
+ - compatible: value should be one of the following:
+    - "ti,am33xx-tilcdc" for AM335x based boards
+    - "ti,da850-tilcdc" for DA850/AM18x/OMAP-L138 based boards
  - interrupts: the interrupt number
  - reg: base address and size of the LCDC device
 
@@ -51,7 +53,7 @@ Optional nodes:
 Example:
 
 	fb: fb@4830e000 {
-		compatible = "ti,am33xx-tilcdc";
+		compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc";
 		reg = <0x4830e000 0x1000>;
 		interrupt-parent = <&intc>;
 		interrupts = <36>;

Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt → Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt

@@ -6,7 +6,7 @@ perform in-band IPMI communication with their host.
 
 Required properties:
 
-- compatible : should be "aspeed,ast2400-bt-bmc"
+- compatible : should be "aspeed,ast2400-ibt-bmc"
 - reg: physical address and size of the registers
 
 Optional properties:
@@ -17,7 +17,7 @@ Optional properties:
 Example:
 
 	ibt@1e789140 {
-		compatible = "aspeed,ast2400-bt-bmc";
+		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
 	};

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -43,6 +43,9 @@ Optional properties:
   reset signal present internally in some host controller IC designs.
   See Documentation/devicetree/bindings/reset/reset.txt for details.
 
+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
   bus interface unit clock and the card interface unit clock.
 
@@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};
 
 [board specific internal DMA resources]

Documentation/devicetree/bindings/net/ethernet.txt

@@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers:
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in ePAPR).
-- phy-mode: string, operation mode of the PHY interface; supported values are
-  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
-  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a
-  de-facto standard property;
+- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
+  standard property; supported values are:
+  * "mii"
+  * "gmii"
+  * "sgmii"
+  * "qsgmii"
+  * "tbi"
+  * "rev-mii"
+  * "rmii"
+  * "rgmii" (RX and TX delays are added by the MAC when required)
+  * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
+     MAC should not add the RX or TX delays in this case)
+  * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
+     should not add an RX delay in this case)
+  * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
+     should not add an TX delay in this case)
+  * "rtbi"
+  * "smii"
+  * "xgmii"
+  * "trgmii"
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
   device; this property is described in ePAPR and so preferred;

Documentation/devicetree/bindings/pci/rockchip-pcie.txt

@@ -26,13 +26,16 @@ Required properties:
 	- "sys"
 	- "legacy"
 	- "client"
-- resets: Must contain five entries for each entry in reset-names.
+- resets: Must contain seven entries for each entry in reset-names.
 	   See ../reset/reset.txt for details.
 - reset-names: Must include the following names
 	- "core"
 	- "mgmt"
 	- "mgmt-sticky"
 	- "pipe"
+	- "pm"
+	- "aclk"
+	- "pclk"
 - pinctrl-names : The pin control state names
 - pinctrl-0: The "default" pinctrl state
 - #interrupt-cells: specifies the number of cells needed to encode an
@@ -86,8 +89,10 @@ pcie0: pcie@f8000000 {
 	reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
 	reg-names = "axi-base", "apb-base";
 	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+		      "pm", "pclk", "aclk";
 	phys = <&pcie_phy>;
 	phy-names = "pcie-phy";
 	pinctrl-names = "default";

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt

@@ -14,11 +14,6 @@ Required properies:
  - #size-cells	: The value of this property must be 1
  - ranges	: defines mapping between pin controller node (parent) to
    gpio-bank node (children).
- - interrupt-parent: phandle of the interrupt parent to which the external
-   GPIO interrupts are forwarded to.
- - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
-   which includes IRQ mux selection register, and the offset of the IRQ mux
-   selection register.
  - pins-are-numbered: Specify the subnodes are using numbered pinmux to
    specify pins.
 
@@ -37,6 +32,11 @@ Required properties:
 
 Optional properties:
  - reset:	  : Reference to the reset controller
+ - interrupt-parent: phandle of the interrupt parent to which the external
+   GPIO interrupts are forwarded to.
+ - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
+   which includes IRQ mux selection register, and the offset of the IRQ mux
+   selection register.
 
 Example:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>

Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt

@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:

Documentation/filesystems/Locking

@@ -447,7 +447,6 @@ prototypes:
 	int (*flush) (struct file *);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t start, loff_t end, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*readv) (struct file *, const struct iovec *, unsigned long,

Documentation/filesystems/vfs.txt

@@ -828,7 +828,6 @@ struct file_operations {
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);

Documentation/gpu/drm-kms-helpers.rst

@@ -63,6 +63,9 @@ Atomic State Reset and Initialization
 .. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
    :doc: atomic state reset and initialization
 
+Helper Functions Reference
+--------------------------
+
 .. kernel-doc:: include/drm/drm_atomic_helper.h
    :internal:
 

Documentation/gpu/drm-kms.rst

@@ -260,6 +260,12 @@ Property Types and Blob Property Support
 .. kernel-doc:: drivers/gpu/drm/drm_property.c
    :export:
 
+Standard Connector Properties
+-----------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: standard connector properties
+
 Plane Composition Properties
 ----------------------------
 
@@ -287,6 +293,12 @@ Tile Group Property
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: Tile group
 
+Explicit Fencing Properties
+---------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_atomic.c
+   :doc: explicit fencing properties
+
 Existing KMS Properties
 -----------------------
 

Documentation/i2c/i2c-topology

@@ -326,7 +326,7 @@ Two parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |  parent- |--'  '--------'
                 .--|  locked  |     .--------.
@@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |   mux-   |--'  '--------'
                 .--|  locked  |     .--------.

Documentation/networking/dsa/dsa.txt

@@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
 Switch tagging protocols
 ------------------------
 
-DSA currently supports 4 different tagging protocols, and a tag-less mode as
+DSA currently supports 5 different tagging protocols, and a tag-less mode as
 well. The different protocols are implemented in:
 
 net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
 net/dsa/tag_dsa.c: Marvell's original DSA tag
 net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
 net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
+net/dsa/tag_qca.c: Qualcomm's 2 bytes tag
 
 The exact format of the tag protocol is vendor specific, but in general, they
 all contain something which:

Documentation/networking/nf_conntrack-sysctl.txt

@@ -62,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds)
 	protocols.
 
 nf_conntrack_helper - BOOLEAN
-	0 - disabled
-	not 0 - enabled (default)
+	0 - disabled (default)
+	not 0 - enabled
 
 	Enable automatic conntrack helper assignment.
+	If disabled it is required to set up iptables rules to assign
+	helpers to connections.  See the CT target description in the
+	iptables-extensions(8) man page for further information.
 
 nf_conntrack_icmp_timeout - INTEGER (seconds)
 	default 30

Documentation/virtual/kvm/api.txt

@@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
 conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
 such as migration.
 
+When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
+set of bits that KVM can return in struct kvm_clock_data's flag member.
+
+The only flag defined now is KVM_CLOCK_TSC_STABLE.  If set, the returned
+value is the exact kvmclock value seen by all VCPUs at the instant
+when KVM_GET_CLOCK was called.  If clear, the returned value is simply
+CLOCK_MONOTONIC plus a constant offset; the offset can be modified
+with KVM_SET_CLOCK.  KVM will try to make all VCPUs follow this clock,
+but the exact value read by each VCPU could differ, because the host
+TSC is not stable.
+
 struct kvm_clock_data {
 	__u64 clock;  /* kvmclock current value */
 	__u32 flags;

MAINTAINERS

@@ -77,6 +77,7 @@ Descriptions of section entries:
 	Q: Patchwork web based patch tracking system site
 	T: SCM tree type and location.
 	   Type is one of: git, hg, quilt, stgit, topgit
+	B: Bug tracking system location.
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -281,6 +282,7 @@ L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/
 F:	drivers/pnp/pnpacpi/
@@ -304,6 +306,8 @@ W:	https://acpica.org/
 W:	https://github.com/acpica/acpica/
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
+B:	https://bugs.acpica.org
 S:	Supported
 F:	drivers/acpi/acpica/
 F:	include/acpi/
@@ -313,6 +317,7 @@ ACPI FAN DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/fan.c
 
@@ -328,6 +333,7 @@ ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/*thermal*
 
@@ -335,6 +341,7 @@ ACPI VIDEO DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/acpi_video.c
 
@@ -3911,7 +3918,7 @@ F:	include/linux/dma-buf*
 F:	include/linux/reservation.h
 F:	include/linux/*fence.h
 F:	Documentation/dma-buf-sharing.txt
-T:	git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 SYNC FILE FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
@@ -3924,7 +3931,7 @@ F:	drivers/dma-buf/sw_sync.c
 F:	include/linux/sync_file.h
 F:	include/uapi/linux/sync_file.h
 F:	Documentation/sync_file.txt
-T:	git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
 M:	Vinod Koul <vinod.koul@intel.com>
@@ -4022,11 +4029,30 @@ F:	Documentation/gpu/
 F:	include/drm/
 F:	include/uapi/drm/
 
+DRM DRIVERS AND MISC GPU PATCHES
+M:	Daniel Vetter <daniel.vetter@intel.com>
+M:	Jani Nikula <jani.nikula@linux.intel.com>
+M:	Sean Paul <seanpaul@chromium.org>
+W:	https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/gpu/
+F:	drivers/gpu/vga/
+F:	drivers/gpu/drm/*
+F:	include/drm/drm*
+F:	include/uapi/drm/drm*
+
 DRM DRIVER FOR AST SERVER GRAPHICS CHIPS
 M:	Dave Airlie <airlied@redhat.com>
 S:	Odd Fixes
 F:	drivers/gpu/drm/ast/
 
+DRM DRIVERS FOR BRIDGE CHIPS
+M:	Archit Taneja <architt@codeaurora.org>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/bridge/
+
 DRM DRIVER FOR BOCHS VIRTUAL GPU
 M:	Gerd Hoffmann <kraxel@redhat.com>
 S:	Odd Fixes
@@ -4134,6 +4160,7 @@ F:	drivers/gpu/drm/gma500/
 
 DRM DRIVERS FOR HISILICON
 M:	Xinliang Liu <z.liuxinliang@hisilicon.com>
+M:	Rongrong Zou <zourongrong@gmail.com>
 R:	Xinwei Kong <kong.kongxinwei@hisilicon.com>
 R:	Chen Feng <puck.chen@hisilicon.com>
 L:	dri-devel@lists.freedesktop.org
@@ -5681,6 +5708,7 @@ HIBERNATION (aka Software Suspend, aka swsusp)
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	arch/x86/power/
 F:	drivers/base/power/
@@ -7102,6 +7130,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Richard Purdie <rpurdie@rpsys.net>
 M:	Jacek Anaszewski <j.anaszewski@samsung.com>
+M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
 S:	Maintained
@@ -8075,6 +8104,7 @@ F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
 
 MELLANOX MLX5 core VPI driver
+M:	Saeed Mahameed <saeedm@mellanox.com>
 M:	Matan Barak <matanb@mellanox.com>
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	netdev@vger.kernel.org
@@ -9265,11 +9295,12 @@ S:	Maintained
 F:	drivers/pci/host/*layerscape*
 
 PCI DRIVER FOR IMX6
-M:	Richard Zhu <Richard.Zhu@freescale.com>
+M:	Richard Zhu <hongxing.zhu@nxp.com>
 M:	Lucas Stach <l.stach@pengutronix.de>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
 F:	drivers/pci/host/*imx6*
 
 PCI DRIVER FOR TI KEYSTONE
@@ -9328,17 +9359,11 @@ F:	drivers/pci/host/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSIS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Pratyush Anand <pratyush.anand@gmail.com>
-L:	linux-pci@vger.kernel.org
-S:	Maintained
-F:	drivers/pci/host/*designware*
-
-PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
-M:	Jose Abreu <Jose.Abreu@synopsys.com>
+M:	Joao Pinto <Joao.Pinto@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
-F:	drivers/pci/host/pcie-designware-plat.c
+F:	drivers/pci/host/*designware*
 
 PCI DRIVER FOR GENERIC OF HOSTS
 M:	Will Deacon <will.deacon@arm.com>
@@ -9353,7 +9378,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
 M:	Keith Busch <keith.busch@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	arch/x86/pci/vmd.c
+F:	drivers/pci/host/vmd.c
 
 PCIE DRIVER FOR ST SPEAR13XX
 M:	Pratyush Anand <pratyush.anand@gmail.com>
@@ -9640,6 +9665,7 @@ POWER MANAGEMENT CORE
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/base/power/
 F:	include/linux/pm.h
@@ -11629,6 +11655,7 @@ M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Len Brown <len.brown@intel.com>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	Documentation/power/
 F:	arch/x86/kernel/acpi/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc8
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -370,7 +370,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 LDFLAGS_vmlinux =
-CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
 CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)
 
 
@@ -399,11 +399,12 @@ KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
-		   -std=gnu89
+		   -std=gnu89 $(call cc-option,-fno-PIE)
+
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 KBUILD_AFLAGS_MODULE  := -DMODULE
 KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
@@ -606,6 +607,13 @@ else
 include/config/auto.conf: ;
 endif # $(dot-config)
 
+# For the kernel to actually contain only the needed exported symbols,
+# we have to build modules as well to determine what those symbols are.
+# (this can be evaluated only once include/config/auto.conf has been included)
+ifdef CONFIG_TRIM_UNUSED_KSYMS
+  KBUILD_MODULES := 1
+endif
+
 # The all: target is the default when no target is given on the
 # command line.
 # This allow a user to issue only 'make' to build a kernel including modules
@@ -620,7 +628,6 @@ ARCH_CFLAGS :=
 include arch/$(SRCARCH)/Makefile
 
 KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
-KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,)
 KBUILD_CFLAGS	+= $(call cc-disable-warning,frame-address,)
 
 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
@@ -629,15 +636,18 @@ KBUILD_CFLAGS	+= $(call cc-option,-fdata-sections,)
 endif
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os
+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
 else
 ifdef CONFIG_PROFILE_ALL_BRANCHES
-KBUILD_CFLAGS	+= -O2
+KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
 else
 KBUILD_CFLAGS   += -O2
 endif
 endif
 
+KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
+			$(call cc-disable-warning,maybe-uninitialized,))
+
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 
@@ -941,7 +951,7 @@ ifdef CONFIG_GDB_SCRIPTS
 endif
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) KBUILD_MODULES=1 -f $(srctree)/Makefile vmlinux_prereq"
+	  "$(MAKE) -f $(srctree)/Makefile vmlinux"
 endif
 
 # standalone target for easier testing
@@ -1016,8 +1026,6 @@ prepare2: prepare3 prepare-compiler-check outputmakefile asm-generic
 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
                    include/config/auto.conf
 	$(cmd_crmodverdir)
-	$(Q)test -e include/generated/autoksyms.h || \
-	    touch   include/generated/autoksyms.h
 
 archprepare: archheaders archscripts prepare1 scripts_basic
 

arch/arc/Makefile

@@ -50,6 +50,9 @@ atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)
 
 cflags-$(atleast_gcc44)			+= -fsection-anchors
 
+cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
+cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
+
 ifdef CONFIG_ISA_ARCV2
 
 ifndef CONFIG_ARC_HAS_LL64
@@ -68,7 +71,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
 # Note: No need to add to cflags-y as that happens anyways
-ARCH_CFLAGS += -O3
+#
+# Disable the false maybe-uninitialized warings gcc spits out at -O3
+ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,)
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it

arch/arc/boot/dts/axc001.dtsi

@@ -71,7 +71,7 @@
 			reg-io-width = <4>;
 		};
 
-		arcpmu0: pmu {
+		arcpct0: pct {
 			compatible = "snps,arc700-pct";
 		};
 	};

arch/arc/boot/dts/nsim_700.dts

@@ -69,7 +69,7 @@
 			};
 		};
 
-		arcpmu0: pmu {
+		arcpct0: pct {
 			compatible = "snps,arc700-pct";
 		};
 	};

arch/arc/boot/dts/nsimosci.dts

@@ -83,5 +83,9 @@
 			reg = <0xf0003000 0x44>;
 			interrupts = <7>;
 		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
 	};
 };

arch/arc/configs/nsim_700_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsim_hs_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsim_hs_smp_defconfig

@@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsimosci_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsimosci_hs_defconfig

@@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
+CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
@@ -34,7 +35,6 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=y
 CONFIG_DRM_ARCPGU=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set

arch/arc/include/asm/arcregs.h

@@ -43,12 +43,14 @@
 #define STATUS_AE_BIT		5	/* Exception active */
 #define STATUS_DE_BIT		6	/* PC is in delay slot */
 #define STATUS_U_BIT		7	/* User/Kernel mode */
+#define STATUS_Z_BIT            11
 #define STATUS_L_BIT		12	/* Loop inhibit */
 
 /* These masks correspond to the status word(STATUS_32) bits */
 #define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
 #define STATUS_DE_MASK		(1<<STATUS_DE_BIT)
 #define STATUS_U_MASK		(1<<STATUS_U_BIT)
+#define STATUS_Z_MASK		(1<<STATUS_Z_BIT)
 #define STATUS_L_MASK		(1<<STATUS_L_BIT)
 
 /*

arch/arc/include/asm/delay.h

@@ -22,10 +22,11 @@
 static inline void __delay(unsigned long loops)
 {
 	__asm__ __volatile__(
-	"	lp  1f	\n"
-	"	nop	\n"
-	"1:		\n"
-	: "+l"(loops));
+	"	mov lp_count, %0	\n"
+	"	lp  1f			\n"
+	"	nop			\n"
+	"1:				\n"
+	: : "r"(loops));
 }
 
 extern void __bad_udelay(void);

arch/arc/include/asm/pgtable.h

@@ -280,7 +280,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
 
 /* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)

arch/arc/include/asm/smp.h

@@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void);
  * API expected BY platform smp code (FROM arch smp code)
  *
  * smp_ipi_irq_setup:
- *	Takes @cpu and @irq to which the arch-common ISR is hooked up
+ *	Takes @cpu and @hwirq to which the arch-common ISR is hooked up
  */
-extern int smp_ipi_irq_setup(int cpu, int irq);
+extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq);
 
 /*
  * struct plat_smp_ops	- SMP callbacks provided by platform to ARC SMP

arch/arc/kernel/devtree.c

@@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
 		arc_base_baud = 166666666;	/* Fixed 166.6MHz clk (TB10x) */
 	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
 		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x) */
+	else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
+		arc_base_baud = 800000000;      /* Fixed 800MHz clk (NPS) */
 	else
 		arc_base_baud = 50000000;	/* Fixed default 50MHz */
 }

arch/arc/kernel/mcip.c

@@ -181,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 {
 	unsigned long flags;
 	cpumask_t online;
+	unsigned int destination_bits;
+	unsigned int distribution_mode;
 
 	/* errout if no online cpu per @cpumask */
 	if (!cpumask_and(&online, cpumask, cpu_online_mask))
@@ -188,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 
 	raw_spin_lock_irqsave(&mcip_lock, flags);
 
-	idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
-	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+	destination_bits = cpumask_bits(&online)[0];
+	idu_set_dest(data->hwirq, destination_bits);
+
+	if (ffs(destination_bits) == fls(destination_bits))
+		distribution_mode = IDU_M_DISTRI_DEST;
+	else
+		distribution_mode = IDU_M_DISTRI_RR;
+
+	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode);
 
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 
@@ -207,16 +216,15 @@ static struct irq_chip idu_irq_chip = {
 
 };
 
-static int idu_first_irq;
+static irq_hw_number_t idu_first_hwirq;
 
 static void idu_cascade_isr(struct irq_desc *desc)
 {
-	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	unsigned int core_irq = irq_desc_get_irq(desc);
-	unsigned int idu_irq;
+	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
+	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
 
-	idu_irq = core_irq - idu_first_irq;
-	generic_handle_irq(irq_find_mapping(domain, idu_irq));
+	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@@ -282,7 +290,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 	struct irq_domain *domain;
 	/* Read IDU BCR to confirm nr_irqs */
 	int nr_irqs = of_irq_count(intc);
-	int i, irq;
+	int i, virq;
 	struct mcip_bcr mp;
 
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
@@ -303,11 +311,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 		 * however we need it to get the parent virq and set IDU handler
 		 * as first level isr
 		 */
-		irq = irq_of_parse_and_map(intc, i);
+		virq = irq_of_parse_and_map(intc, i);
 		if (!i)
-			idu_first_irq = irq;
+			idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq));
 
-		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
+		irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
 	}
 
 	__mcip_cmd(CMD_IDU_ENABLE, 0);

arch/arc/kernel/process.c

@@ -43,8 +43,8 @@ SYSCALL_DEFINE0(arc_gettls)
 
 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 {
-	int uval;
-	int ret;
+	struct pt_regs *regs = current_pt_regs();
+	int uval = -EFAULT;
 
 	/*
 	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
@@ -54,24 +54,26 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 	 */
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
 
+	/* Z indicates to userspace if operation succeded */
+	regs->status32 &= ~STATUS_Z_MASK;
+
 	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
 		return -EFAULT;
 
 	preempt_disable();
 
-	ret = __get_user(uval, uaddr);
-	if (ret)
+	if (__get_user(uval, uaddr))
 		goto done;
 
-	if (uval != expected)
-		ret = -EAGAIN;
-	else
-		ret = __put_user(new, uaddr);
+	if (uval == expected) {
+		if (!__put_user(new, uaddr))
+			regs->status32 |= STATUS_Z_MASK;
+	}
 
 done:
 	preempt_enable();
 
-	return ret;
+	return uval;
 }
 
 void arch_cpu_idle(void)

arch/arc/kernel/smp.c

@@ -22,6 +22,7 @@
 #include <linux/atomic.h>
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
+#include <linux/irqdomain.h>
 #include <asm/processor.h>
 #include <asm/setup.h>
 #include <asm/mach_desc.h>
@@ -67,11 +68,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	int i;
 
 	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
+	 * if platform didn't set the present map already, do it now
+	 * boot cpu is set to present already by init/main.c
 	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
+	if (num_present_cpus() <= 1) {
+		for (i = 0; i < max_cpus; i++)
+			set_cpu_present(i, true);
+	}
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -351,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  */
 static DEFINE_PER_CPU(int, ipi_dev);
 
-int smp_ipi_irq_setup(int cpu, int irq)
+int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
 {
 	int *dev = per_cpu_ptr(&ipi_dev, cpu);
+	unsigned int virq = irq_find_mapping(NULL, hwirq);
+
+	if (!virq)
+		panic("Cannot find virq for root domain and hwirq=%lu", hwirq);
 
 	/* Boot cpu calls request, all call enable */
 	if (!cpu) {
 		int rc;
 
-		rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev);
+		rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev);
 		if (rc)
-			panic("Percpu IRQ request failed for %d\n", irq);
+			panic("Percpu IRQ request failed for %u\n", virq);
 	}
 
-	enable_percpu_irq(irq, 0);
+	enable_percpu_irq(virq, 0);
 
 	return 0;
 }

arch/arc/kernel/time.c

@@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs)
 		cycle_t  full;
 	} stamp;
 
-
-	__asm__ __volatile(
-	"1:						\n"
-	"	lr		%0, [AUX_RTC_LOW]	\n"
-	"	lr		%1, [AUX_RTC_HIGH]	\n"
-	"	lr		%2, [AUX_RTC_CTRL]	\n"
-	"	bbit0.nt	%2, 31, 1b		\n"
-	: "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
+	/*
+	 * hardware has an internal state machine which tracks readout of
+	 * low/high and updates the CTRL.status if
+	 *  - interrupt/exception taken between the two reads
+	 *  - high increments after low has been read
+	 */
+	do {
+		stamp.low = read_aux_reg(AUX_RTC_LOW);
+		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		status = read_aux_reg(AUX_RTC_CTRL);
+	} while (!(status & _BITUL(31)));
 
 	return stamp.full;
 }

arch/arc/mm/cache.c

@@ -23,7 +23,7 @@
 
 static int l2_line_sz;
 static int ioc_exists;
-int slc_enable = 1, ioc_enable = 1;
+int slc_enable = 1, ioc_enable = 0;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 

arch/arc/mm/dma.c

@@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr,
 	__free_pages(page, get_order(size));
 }
 
+static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+			void *cpu_addr, dma_addr_t dma_addr, size_t size,
+			unsigned long attrs)
+{
+	unsigned long user_count = vma_pages(vma);
+	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr));
+	unsigned long off = vma->vm_pgoff;
+	int ret = -ENXIO;
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
+
+	if (off < count && user_count <= (count - off)) {
+		ret = remap_pfn_range(vma, vma->vm_start,
+				      pfn + off,
+				      user_count << PAGE_SHIFT,
+				      vma->vm_page_prot);
+	}
+
+	return ret;
+}
+
 /*
  * streaming DMA Mapping API...
  * CPU accesses page via normal paddr, thus needs to explicitly made
@@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask)
 struct dma_map_ops arc_dma_ops = {
 	.alloc			= arc_dma_alloc,
 	.free			= arc_dma_free,
+	.mmap			= arc_dma_mmap,
 	.map_page		= arc_dma_map_page,
 	.map_sg			= arc_dma_map_sg,
 	.sync_single_for_device	= arc_dma_sync_single_for_device,

arch/arc/plat-eznps/smp.c

@@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu)
 	mtm_enable_core(cpu);
 }
 
-static void eznps_ipi_clear(int irq)
-{
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-}
-
 struct plat_smp_ops plat_smp_ops = {
 	.info		= smp_cpuinfo_buf,
 	.init_early_smp	= eznps_init_cpumasks,
 	.cpu_kick	= eznps_smp_wakeup_cpu,
 	.ipi_send	= eznps_ipi_send,
 	.init_per_cpu	= eznps_init_per_cpu,
-	.ipi_clear	= eznps_ipi_clear,
 };

arch/arm/boot/dts/Makefile

@@ -745,7 +745,6 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-pcduino2.dtb \
 	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
-	ntc-gr8-evb.dtb \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
@@ -761,6 +760,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-evb.dtb \
 	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \

arch/arm/boot/dts/imx53-qsb.dts

@@ -64,8 +64,8 @@
 			};
 
 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
@@ -76,8 +76,8 @@
 			};
 
 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
@@ -100,14 +100,14 @@
 			};
 
 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	wl12xx_vmmc: wl12xx_vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -13,9 +13,9 @@
 		};
 	};
 
-	memory@0 {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x80000000 0>;
 	};
 
 	leds {

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -124,6 +124,7 @@
 		compatible = "ti,abe-twl6040";
 		ti,model = "omap5-uevm";
 
+		ti,jack-detection;
 		ti,mclk-freq = <19200000>;
 
 		ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
 			ti,backup-battery-charge-high-current;
 		};
 
-		gpadc {
+		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
 			interrupts = <18 0
 				      16 0
@@ -475,8 +476,8 @@
 				smps6_reg: smps6 {
 					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

arch/arm/boot/dts/stih407-family.dtsi

@@ -283,6 +283,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -296,6 +298,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -309,6 +313,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -322,6 +328,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -335,6 +343,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -348,6 +358,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -363,6 +375,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -376,6 +390,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};

arch/arm/boot/dts/stih410-b2260.dts

@@ -74,7 +74,7 @@
 		/* Low speed expansion connector */
 		spi0: spi@9844000 {
 			label = "LS-SPI0";
-			cs-gpio = <&pio30 3 0>;
+			cs-gpios = <&pio30 3 0>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/ntc-gr8-evb.dts → arch/arm/boot/dts/sun5i-gr8-evb.dts

@@ -44,7 +44,7 @@
  */
 
 /dts-v1/;
-#include "ntc-gr8.dtsi"
+#include "sun5i-gr8.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -282,11 +282,15 @@
 			uart1_pins_a: uart1@0 {
 				allwinner,pins = "PG6", "PG7";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
 				allwinner,pins = "PG8", "PG9";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {

arch/arm/include/asm/Kbuild

@@ -8,7 +8,6 @@ generic-y += early_ioremap.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
-generic-y += export.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h

arch/arm/include/asm/kvm_asm.h

@@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[];
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
+extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
 
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
 

arch/arm/include/asm/kvm_host.h

@@ -57,6 +57,9 @@ struct kvm_arch {
 	/* VTTBR value associated with below pgd and vmid */
 	u64    vttbr;
 
+	/* The last vcpu id that ran on each physical CPU */
+	int __percpu *last_vcpu_ran;
+
 	/* Timer */
 	struct arch_timer_kvm	timer;
 

arch/arm/include/asm/kvm_hyp.h

@@ -71,6 +71,7 @@
 #define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
 #define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
 #define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
+#define TLBIALL		__ACCESS_CP15(c8, 0, c7, 0)
 #define TLBIALLNSNHIS	__ACCESS_CP15(c8, 4, c3, 4)
 #define PRRR		__ACCESS_CP15(c10, 0, c2, 0)
 #define NMRR		__ACCESS_CP15(c10, 0, c2, 1)

arch/arm/kernel/Makefile

@@ -33,7 +33,7 @@ endif
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
-obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARM_MODULE_PLTS)	+= module-plts.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o

arch/arm/kernel/armksyms.c

@@ -0,0 +1,183 @@
+/*
+ *  linux/arch/arm/kernel/armksyms.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/arm-smccc.h>
+
+#include <asm/checksum.h>
+#include <asm/ftrace.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler...  (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __do_div64(void);
+extern void __bswapsi2(void);
+extern void __bswapdi2(void);
+
+extern void __aeabi_idiv(void);
+extern void __aeabi_idivmod(void);
+extern void __aeabi_lasr(void);
+extern void __aeabi_llsl(void);
+extern void __aeabi_llsr(void);
+extern void __aeabi_lmul(void);
+extern void __aeabi_uidiv(void);
+extern void __aeabi_uidivmod(void);
+extern void __aeabi_ulcmp(void);
+
+extern void fpundefinstr(void);
+
+void mmioset(void *, unsigned int, size_t);
+void mmiocpy(void *, const void *, size_t);
+
+	/* platform dependent support */
+EXPORT_SYMBOL(arm_delay_ops);
+
+	/* networking */
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_ipv6_magic);
+
+	/* io */
+#ifndef __raw_readsb
+EXPORT_SYMBOL(__raw_readsb);
+#endif
+#ifndef __raw_readsw
+EXPORT_SYMBOL(__raw_readsw);
+#endif
+#ifndef __raw_readsl
+EXPORT_SYMBOL(__raw_readsl);
+#endif
+#ifndef __raw_writesb
+EXPORT_SYMBOL(__raw_writesb);
+#endif
+#ifndef __raw_writesw
+EXPORT_SYMBOL(__raw_writesw);
+#endif
+#ifndef __raw_writesl
+EXPORT_SYMBOL(__raw_writesl);
+#endif
+
+	/* string / mem functions */
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(__memzero);
+
+EXPORT_SYMBOL(mmioset);
+EXPORT_SYMBOL(mmiocpy);
+
+#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
+EXPORT_SYMBOL(arm_copy_from_user);
+EXPORT_SYMBOL(arm_copy_to_user);
+EXPORT_SYMBOL(arm_clear_user);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__get_user_8);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(__get_user_64t_1);
+EXPORT_SYMBOL(__get_user_64t_2);
+EXPORT_SYMBOL(__get_user_64t_4);
+EXPORT_SYMBOL(__get_user_32t_8);
+#endif
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+#endif
+
+	/* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__do_div64);
+EXPORT_SYMBOL(__bswapsi2);
+EXPORT_SYMBOL(__bswapdi2);
+
+#ifdef CONFIG_AEABI
+EXPORT_SYMBOL(__aeabi_idiv);
+EXPORT_SYMBOL(__aeabi_idivmod);
+EXPORT_SYMBOL(__aeabi_lasr);
+EXPORT_SYMBOL(__aeabi_llsl);
+EXPORT_SYMBOL(__aeabi_llsr);
+EXPORT_SYMBOL(__aeabi_lmul);
+EXPORT_SYMBOL(__aeabi_uidiv);
+EXPORT_SYMBOL(__aeabi_uidivmod);
+EXPORT_SYMBOL(__aeabi_ulcmp);
+#endif
+
+	/* bitops */
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
+EXPORT_SYMBOL(_find_first_zero_bit_le);
+EXPORT_SYMBOL(_find_next_zero_bit_le);
+EXPORT_SYMBOL(_find_first_bit_le);
+EXPORT_SYMBOL(_find_next_bit_le);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(_find_first_zero_bit_be);
+EXPORT_SYMBOL(_find_next_zero_bit_be);
+EXPORT_SYMBOL(_find_first_bit_be);
+EXPORT_SYMBOL(_find_next_bit_be);
+#endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_OLD_MCOUNT
+EXPORT_SYMBOL(mcount);
+#endif
+EXPORT_SYMBOL(__gnu_mcount_nc);
+#endif
+
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+EXPORT_SYMBOL(__pv_phys_pfn_offset);
+EXPORT_SYMBOL(__pv_offset);
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SMCCC
+EXPORT_SYMBOL(arm_smccc_smc);
+EXPORT_SYMBOL(arm_smccc_hvc);
+#endif

arch/arm/kernel/entry-ftrace.S

@@ -7,7 +7,6 @@
 #include <asm/assembler.h>
 #include <asm/ftrace.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #include "entry-header.S"
 
@@ -154,7 +153,6 @@ ENTRY(mcount)
 	__mcount _old
 #endif
 ENDPROC(mcount)
-EXPORT_SYMBOL(mcount)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller_old)
@@ -207,7 +205,6 @@ UNWIND(.fnstart)
 #endif
 UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
-EXPORT_SYMBOL(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)

arch/arm/kernel/head.S

@@ -22,7 +22,6 @@
 #include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/pgtable.h>
-#include <asm/export.h>
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
 #include CONFIG_DEBUG_LL_INCLUDE
@@ -728,8 +727,6 @@ __pv_phys_pfn_offset:
 __pv_offset:
 	.quad	0
 	.size	__pv_offset, . -__pv_offset
-EXPORT_SYMBOL(__pv_phys_pfn_offset)
-EXPORT_SYMBOL(__pv_offset)
 #endif
 
 #include "head-common.S"

arch/arm/kernel/smccc-call.S

@@ -16,7 +16,6 @@
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 	/*
 	 * Wrap c macros in asm macros to delay expansion until after the
@@ -52,7 +51,6 @@ UNWIND(	.fnend)
 ENTRY(arm_smccc_smc)
 	SMCCC SMCCC_SMC
 ENDPROC(arm_smccc_smc)
-EXPORT_SYMBOL(arm_smccc_smc)
 
 /*
  * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
@@ -62,4 +60,3 @@ EXPORT_SYMBOL(arm_smccc_smc)
 ENTRY(arm_smccc_hvc)
 	SMCCC SMCCC_HVC
 ENDPROC(arm_smccc_hvc)
-EXPORT_SYMBOL(arm_smccc_hvc)

arch/arm/kernel/traps.c

@@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
+void dump_backtrace_stm(u32 *stack, u32 instruction)
+{
+	char str[80], *p;
+	unsigned int x;
+	int reg;
+
+	for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
+		if (instruction & BIT(reg)) {
+			p += sprintf(p, " r%d:%08x", reg, *stack--);
+			if (++x == 6) {
+				x = 0;
+				p = str;
+				printk("%s\n", str);
+			}
+		}
+	}
+	if (p != str)
+		printk("%s\n", str);
+}
+
 #ifndef CONFIG_ARM_UNWIND
 /*
  * Stack pointers should always be within the kernels view of

arch/arm/kernel/vmlinux-xip.lds.S

@@ -3,6 +3,9 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
  */
 
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
@@ -223,6 +226,8 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 
+		*(.data..ro_after_init)
+
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)

arch/arm/kvm/arm.c

@@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn)
  */
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 {
-	int ret = 0;
+	int ret, cpu;
 
 	if (type)
 		return -EINVAL;
 
+	kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran));
+	if (!kvm->arch.last_vcpu_ran)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu)
+		*per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1;
+
 	ret = kvm_alloc_stage2_pgd(kvm);
 	if (ret)
 		goto out_fail_alloc;
@@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 out_free_stage2_pgd:
 	kvm_free_stage2_pgd(kvm);
 out_fail_alloc:
+	free_percpu(kvm->arch.last_vcpu_ran);
+	kvm->arch.last_vcpu_ran = NULL;
 	return ret;
 }
 
@@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
+	free_percpu(kvm->arch.last_vcpu_ran);
+	kvm->arch.last_vcpu_ran = NULL;
+
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);
@@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
+	int *last_ran;
+
+	last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran);
+
+	/*
+	 * We might get preempted before the vCPU actually runs, but
+	 * over-invalidation doesn't affect correctness.
+	 */
+	if (*last_ran != vcpu->vcpu_id) {
+		kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu);
+		*last_ran = vcpu->vcpu_id;
+	}
+
 	vcpu->cpu = cpu;
 	vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);
 

arch/arm/kvm/hyp/tlb.c

@@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 	__kvm_tlb_flush_vmid(kvm);
 }
 
+void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
+
+	/* Switch to requested VMID */
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	isb();
+
+	write_sysreg(0, TLBIALL);
+	dsb(nsh);
+	isb();
+
+	write_sysreg(0, VTTBR);
+}
+
 void __hyp_text __kvm_flush_vm_context(void)
 {
 	write_sysreg(0, TLBIALLNSNHIS);

arch/arm/lib/ashldi3.S

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_llsl)
 
 ENDPROC(__ashldi3)
 ENDPROC(__aeabi_llsl)
-EXPORT_SYMBOL(__ashldi3)
-EXPORT_SYMBOL(__aeabi_llsl)

arch/arm/lib/ashrdi3.S

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_lasr)
 
 ENDPROC(__ashrdi3)
 ENDPROC(__aeabi_lasr)
-EXPORT_SYMBOL(__ashrdi3)
-EXPORT_SYMBOL(__aeabi_lasr)

arch/arm/lib/backtrace.S

@@ -10,6 +10,7 @@
  * 27/03/03 Ian Molton Clean up CONFIG_CPU
  *
  */
+#include <linux/kern_levels.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text
@@ -83,13 +84,13 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
 		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 		teq	sv_fp, #0		@ zero saved fp means
 		beq	no_frame		@ no further frames
@@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
 		.long	1004b, 1006b
 		.popsection
 
-#define instr r4
-#define reg   r5
-#define stack r6
-
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #10
-		mov	r7, #0
-1:		mov	r3, #1
- ARM(		tst	instr, r3, lsl reg	)
- THUMB(		lsl	r3, reg			)
- THUMB(		tst	instr, r3		)
-		beq	2f
-		add	r7, r7, #1
-		teq	r7, #6
-		moveq	r7, #0
-		adr	r3, .Lcr
-		addne	r3, r3, #1		@ skip newline
-		ldr	r2, [stack], #-4
-		mov	r1, reg
-		adr	r0, .Lfp
-		bl	printk
-2:		subs	reg, reg, #1
-		bpl	1b
-		teq	r7, #0
-		adrne	r0, .Lcr
-		blne	printk
-		ldmfd	sp!, {instr, reg, stack, r7, pc}
-
-.Lfp:		.asciz	" r%d:%08x%s"
-.Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}

arch/arm/lib/bitops.h

@@ -1,6 +1,5 @@
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #if __LINUX_ARM_ARCH__ >= 6
 	.macro	bitop, name, instr
@@ -26,7 +25,6 @@ UNWIND(	.fnstart	)
 	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 	.macro	testop, name, instr, store
@@ -57,7 +55,6 @@ UNWIND(	.fnstart	)
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #else
 	.macro	bitop, name, instr
@@ -77,7 +74,6 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 /**
@@ -106,6 +102,5 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #endif

arch/arm/lib/bswapsdi2.S

@@ -1,6 +1,5 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #if __LINUX_ARM_ARCH__ >= 6
 ENTRY(__bswapsi2)
@@ -36,5 +35,3 @@ ENTRY(__bswapdi2)
 	ret lr
 ENDPROC(__bswapdi2)
 #endif
-EXPORT_SYMBOL(__bswapsi2)
-EXPORT_SYMBOL(__bswapdi2)

arch/arm/lib/clear_user.S

@@ -10,7 +10,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 		.text
 
@@ -51,9 +50,6 @@ USER(		strnebt	r2, [r0])
 UNWIND(.fnend)
 ENDPROC(arm_clear_user)
 ENDPROC(__clear_user_std)
-#ifndef CONFIG_UACCESS_WITH_MEMCPY
-EXPORT_SYMBOL(arm_clear_user)
-#endif
 
 		.pushsection .text.fixup,"ax"
 		.align	0

arch/arm/lib/copy_from_user.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 /*
  * Prototype:
@@ -95,7 +94,6 @@ ENTRY(arm_copy_from_user)
 #include "copy_template.S"
 
 ENDPROC(arm_copy_from_user)
-EXPORT_SYMBOL(arm_copy_from_user)
 
 	.pushsection .fixup,"ax"
 	.align 0

arch/arm/lib/copy_page.S

@@ -13,7 +13,6 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
-#include <asm/export.h>
 
 #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
 
@@ -46,4 +45,3 @@ ENTRY(copy_page)
 	PLD(	beq	2b			)
 		ldmfd	sp!, {r4, pc}			@	3
 ENDPROC(copy_page)
-EXPORT_SYMBOL(copy_page)

arch/arm/lib/copy_to_user.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 /*
  * Prototype:
@@ -100,9 +99,6 @@ WEAK(arm_copy_to_user)
 
 ENDPROC(arm_copy_to_user)
 ENDPROC(__copy_to_user_std)
-#ifndef CONFIG_UACCESS_WITH_MEMCPY
-EXPORT_SYMBOL(arm_copy_to_user)
-#endif
 
 	.pushsection .text.fixup,"ax"
 	.align 0

arch/arm/lib/csumipv6.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.text
 
@@ -31,4 +30,4 @@ ENTRY(__csum_ipv6_magic)
 		adcs	r0, r0, #0
 		ldmfd	sp!, {pc}
 ENDPROC(__csum_ipv6_magic)
-EXPORT_SYMBOL(__csum_ipv6_magic)
+

arch/arm/lib/csumpartial.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.text
 
@@ -141,4 +140,3 @@ ENTRY(csum_partial)
 		bne	4b
 		b	.Lless4
 ENDPROC(csum_partial)
-EXPORT_SYMBOL(csum_partial)

arch/arm/lib/csumpartialcopy.S

@@ -49,6 +49,5 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
 #define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_nocheck)
 
 #include "csumpartialcopygeneric.S"

arch/arm/lib/csumpartialcopygeneric.S

@@ -8,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 /*
  * unsigned int
@@ -332,4 +331,3 @@ FN_ENTRY
 		mov	r5, r4, get_byte_1
 		b	.Lexit
 FN_EXIT
-FN_EXPORT

arch/arm/lib/csumpartialcopyuser.S

@@ -73,7 +73,6 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
 #define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_from_user)
 
 #include "csumpartialcopygeneric.S"
 

arch/arm/lib/delay.c

@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/export.h>
 #include <linux/timex.h>
 
 /*
@@ -35,7 +34,6 @@ struct arm_delay_ops arm_delay_ops __ro_after_init = {
 	.const_udelay	= __loop_const_udelay,
 	.udelay		= __loop_udelay,
 };
-EXPORT_SYMBOL(arm_delay_ops);
 
 static const struct delay_timer *delay_timer;
 static bool delay_calibrated;

arch/arm/lib/div64.S

@@ -15,7 +15,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define xh r0
@@ -211,4 +210,3 @@ Ldiv0_64:
 
 UNWIND(.fnend)
 ENDPROC(__do_div64)
-EXPORT_SYMBOL(__do_div64)

arch/arm/lib/findbit.S

@@ -15,7 +15,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
                 .text
 
 /*
@@ -38,7 +37,6 @@ ENTRY(_find_first_zero_bit_le)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_zero_bit_le)
-EXPORT_SYMBOL(_find_first_zero_bit_le)
 
 /*
  * Purpose  : Find next 'zero' bit
@@ -59,7 +57,6 @@ ENTRY(_find_next_zero_bit_le)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_zero_bit_le)
-EXPORT_SYMBOL(_find_next_zero_bit_le)
 
 /*
  * Purpose  : Find a 'one' bit
@@ -81,7 +78,6 @@ ENTRY(_find_first_bit_le)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_bit_le)
-EXPORT_SYMBOL(_find_first_bit_le)
 
 /*
  * Purpose  : Find next 'one' bit
@@ -101,7 +97,6 @@ ENTRY(_find_next_bit_le)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_bit_le)
-EXPORT_SYMBOL(_find_next_bit_le)
 
 #ifdef __ARMEB__
 
@@ -121,7 +116,6 @@ ENTRY(_find_first_zero_bit_be)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_zero_bit_be)
-EXPORT_SYMBOL(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
 		teq	r1, #0
@@ -139,7 +133,6 @@ ENTRY(_find_next_zero_bit_be)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_zero_bit_be)
-EXPORT_SYMBOL(_find_next_zero_bit_be)
 
 ENTRY(_find_first_bit_be)
 		teq	r1, #0
@@ -157,7 +150,6 @@ ENTRY(_find_first_bit_be)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_bit_be)
-EXPORT_SYMBOL(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
 		teq	r1, #0
@@ -174,7 +166,6 @@ ENTRY(_find_next_bit_be)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_bit_be)
-EXPORT_SYMBOL(_find_next_bit_be)
 
 #endif
 

arch/arm/lib/getuser.S

@@ -31,7 +31,6 @@
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
-#include <asm/export.h>
 
 ENTRY(__get_user_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad
@@ -39,7 +38,6 @@ ENTRY(__get_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_1)
-EXPORT_SYMBOL(__get_user_1)
 
 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
@@ -60,7 +58,6 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
-EXPORT_SYMBOL(__get_user_2)
 
 ENTRY(__get_user_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad
@@ -68,7 +65,6 @@ ENTRY(__get_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_4)
-EXPORT_SYMBOL(__get_user_4)
 
 ENTRY(__get_user_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad
@@ -82,7 +78,6 @@ ENTRY(__get_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_8)
-EXPORT_SYMBOL(__get_user_8)
 
 #ifdef __ARMEB__
 ENTRY(__get_user_32t_8)
@@ -96,7 +91,6 @@ ENTRY(__get_user_32t_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_32t_8)
-EXPORT_SYMBOL(__get_user_32t_8)
 
 ENTRY(__get_user_64t_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad8
@@ -104,7 +98,6 @@ ENTRY(__get_user_64t_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_1)
-EXPORT_SYMBOL(__get_user_64t_1)
 
 ENTRY(__get_user_64t_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad8
@@ -121,7 +114,6 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_2)
-EXPORT_SYMBOL(__get_user_64t_2)
 
 ENTRY(__get_user_64t_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad8
@@ -129,7 +121,6 @@ ENTRY(__get_user_64t_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_4)
-EXPORT_SYMBOL(__get_user_64t_4)
 #endif
 
 __get_user_bad8:

arch/arm/lib/io-readsb.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 .Linsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
@@ -122,4 +121,3 @@ ENTRY(__raw_readsb)
 
 		ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(__raw_readsb)
-EXPORT_SYMBOL(__raw_readsb)

arch/arm/lib/io-readsl.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 ENTRY(__raw_readsl)
 		teq	r2, #0		@ do we have to check for the zero len?
@@ -78,4 +77,3 @@ ENTRY(__raw_readsl)
 		strb	r3, [r1, #0]
 		ret	lr
 ENDPROC(__raw_readsl)
-EXPORT_SYMBOL(__raw_readsl)

arch/arm/lib/io-readsw-armv3.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
@@ -104,4 +103,4 @@ ENTRY(__raw_readsw)
 
 		ldmfd	sp!, {r4, r5, r6, pc}
 
-EXPORT_SYMBOL(__raw_readsw)
+

arch/arm/lib/io-readsw-armv4.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.macro	pack, rd, hw1, hw2
 #ifndef __ARMEB__
@@ -130,4 +129,3 @@ ENTRY(__raw_readsw)
 		strneb	ip, [r1]
 		ldmfd	sp!, {r4, pc}
 ENDPROC(__raw_readsw)
-EXPORT_SYMBOL(__raw_readsw)

arch/arm/lib/io-writesb.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.macro	outword, rd
 #ifndef __ARMEB__
@@ -93,4 +92,3 @@ ENTRY(__raw_writesb)
 
 		ldmfd	sp!, {r4, r5, pc}
 ENDPROC(__raw_writesb)
-EXPORT_SYMBOL(__raw_writesb)

arch/arm/lib/io-writesl.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 ENTRY(__raw_writesl)
 		teq	r2, #0		@ do we have to check for the zero len?
@@ -66,4 +65,3 @@ ENTRY(__raw_writesl)
 		bne	6b
 		ret	lr
 ENDPROC(__raw_writesl)
-EXPORT_SYMBOL(__raw_writesl)

arch/arm/lib/io-writesw-armv3.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
@@ -125,4 +124,3 @@ ENTRY(__raw_writesw)
 		strne	ip, [r0]
 
 		ldmfd	sp!, {r4, r5, r6, pc}
-EXPORT_SYMBOL(__raw_writesw)

arch/arm/lib/io-writesw-armv4.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.macro	outword, rd
 #ifndef __ARMEB__
@@ -99,4 +98,3 @@ ENTRY(__raw_writesw)
 		strneh	ip, [r0]
 		ret	lr
 ENDPROC(__raw_writesw)
-EXPORT_SYMBOL(__raw_writesw)

arch/arm/lib/lib1funcs.S

@@ -36,7 +36,6 @@ Boston, MA 02111-1307, USA.  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 .macro ARM_DIV_BODY dividend, divisor, result, curbit
 
@@ -239,8 +238,6 @@ UNWIND(.fnstart)
 UNWIND(.fnend)
 ENDPROC(__udivsi3)
 ENDPROC(__aeabi_uidiv)
-EXPORT_SYMBOL(__udivsi3)
-EXPORT_SYMBOL(__aeabi_uidiv)
 
 ENTRY(__umodsi3)
 UNWIND(.fnstart)
@@ -259,7 +256,6 @@ UNWIND(.fnstart)
 
 UNWIND(.fnend)
 ENDPROC(__umodsi3)
-EXPORT_SYMBOL(__umodsi3)
 
 #ifdef CONFIG_ARM_PATCH_IDIV
 	.align 3
@@ -307,8 +303,6 @@ UNWIND(.fnstart)
 UNWIND(.fnend)
 ENDPROC(__divsi3)
 ENDPROC(__aeabi_idiv)
-EXPORT_SYMBOL(__divsi3)
-EXPORT_SYMBOL(__aeabi_idiv)
 
 ENTRY(__modsi3)
 UNWIND(.fnstart)
@@ -333,7 +327,6 @@ UNWIND(.fnstart)
 
 UNWIND(.fnend)
 ENDPROC(__modsi3)
-EXPORT_SYMBOL(__modsi3)
 
 #ifdef CONFIG_AEABI
 
@@ -350,7 +343,6 @@ UNWIND(.save {r0, r1, ip, lr}	)
 
 UNWIND(.fnend)
 ENDPROC(__aeabi_uidivmod)
-EXPORT_SYMBOL(__aeabi_uidivmod)
 
 ENTRY(__aeabi_idivmod)
 UNWIND(.fnstart)
@@ -364,7 +356,6 @@ UNWIND(.save {r0, r1, ip, lr}	)
 
 UNWIND(.fnend)
 ENDPROC(__aeabi_idivmod)
-EXPORT_SYMBOL(__aeabi_idivmod)
 
 #endif
 

arch/arm/lib/lshrdi3.S

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_llsr)
 
 ENDPROC(__lshrdi3)
 ENDPROC(__aeabi_llsr)
-EXPORT_SYMBOL(__lshrdi3)
-EXPORT_SYMBOL(__aeabi_llsr)

arch/arm/lib/memchr.S

@@ -11,7 +11,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 	.text
 	.align	5
@@ -25,4 +24,3 @@ ENTRY(memchr)
 2:	movne	r0, #0
 	ret	lr
 ENDPROC(memchr)
-EXPORT_SYMBOL(memchr)

arch/arm/lib/memcpy.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #define LDR1W_SHIFT	0
 #define STR1W_SHIFT	0
@@ -69,5 +68,3 @@ ENTRY(memcpy)
 
 ENDPROC(memcpy)
 ENDPROC(mmiocpy)
-EXPORT_SYMBOL(memcpy)
-EXPORT_SYMBOL(mmiocpy)

arch/arm/lib/memmove.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 		.text
 
@@ -226,4 +225,3 @@ ENTRY(memmove)
 18:		backward_copy_shift	push=24	pull=8
 
 ENDPROC(memmove)
-EXPORT_SYMBOL(memmove)

arch/arm/lib/memset.S

@@ -12,7 +12,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 	.text
 	.align	5
@@ -136,5 +135,3 @@ UNWIND( .fnstart            )
 UNWIND( .fnend   )
 ENDPROC(memset)
 ENDPROC(mmioset)
-EXPORT_SYMBOL(memset)
-EXPORT_SYMBOL(mmioset)

arch/arm/lib/memzero.S

@@ -10,7 +10,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 	.text
 	.align	5
@@ -136,4 +135,3 @@ UNWIND(	.fnstart			)
 	ret	lr			@ 1
 UNWIND(	.fnend				)
 ENDPROC(__memzero)
-EXPORT_SYMBOL(__memzero)

arch/arm/lib/muldi3.S

@@ -12,7 +12,6 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define xh r0
@@ -47,5 +46,3 @@ ENTRY(__aeabi_lmul)
 
 ENDPROC(__muldi3)
 ENDPROC(__aeabi_lmul)
-EXPORT_SYMBOL(__muldi3)
-EXPORT_SYMBOL(__aeabi_lmul)