powerpc/fsl_pci: Convert PCI to use generic config accessors

Convert the fsl_pci driver to use the generic config access functions.

This changes accesses from (in|out)_(8|le16|le32) to readX/writeX variants.
I believe these should be equivalent for PCI config space accesses, but
confirmation would be nice.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: linuxppc-dev@lists.ozlabs.org

arch/powerpc/sysdev/fsl_pci.c

@@ -645,61 +645,21 @@ mapped:
 	return pcie->cfg_type1 + offset;
 }
 
-static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
-				    int offset, int len, u32 *val)
-{
-	void __iomem *cfg_addr;
-
-	cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
-	if (!cfg_addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_addr);
-		break;
-	case 2:
-		*val = in_le16(cfg_addr);
-		break;
-	default:
-		*val = in_le32(cfg_addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
 static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
 				     int offset, int len, u32 val)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
-	void __iomem *cfg_addr;
-
-	cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
-	if (!cfg_addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
 	if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
 		val &= 0xffffff00;
 
-	switch (len) {
-	case 1:
-		out_8(cfg_addr, val);
-		break;
-	case 2:
-		out_le16(cfg_addr, val);
-		break;
-	default:
-		out_le32(cfg_addr, val);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
+	return pci_generic_config_write(bus, devfn, offset, len, val);
 }
 
 static struct pci_ops mpc83xx_pcie_ops = {
-	.read = mpc83xx_pcie_read_config,
+	.map_bus = mpc83xx_pcie_remap_cfg,
+	.read = pci_generic_config_read,
 	.write = mpc83xx_pcie_write_config,
 };