|
|
@@ -0,0 +1,79 @@
|
|
|
+* Dialog DA9062 Power Management Integrated Circuit (PMIC)
|
|
|
+
|
|
|
+DA9062 consists of a large and varied group of sub-devices:
|
|
|
+
|
|
|
+Device Supply Names Description
|
|
|
+------ ------------ -----------
|
|
|
+da9062-regulator : : LDOs & BUCKs
|
|
|
+da9062-watchdog : : Watchdog Timer
|
|
|
+
|
|
|
+======
|
|
|
+
|
|
|
+Required properties:
|
|
|
+
|
|
|
+- compatible : Should be "dlg,da9062".
|
|
|
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
|
|
|
+ modified to match the chip's OTP settings).
|
|
|
+- interrupt-parent : Specifies the reference to the interrupt controller for
|
|
|
+ the DA9062.
|
|
|
+- interrupts : IRQ line information.
|
|
|
+- interrupt-controller
|
|
|
+
|
|
|
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
|
|
|
+further information on IRQ bindings.
|
|
|
+
|
|
|
+Sub-nodes:
|
|
|
+
|
|
|
+- regulators : This node defines the settings for the LDOs and BUCKs. The
|
|
|
+ DA9062 regulators are bound using their names listed below:
|
|
|
+
|
|
|
+ buck1 : BUCK_1
|
|
|
+ buck2 : BUCK_2
|
|
|
+ buck3 : BUCK_3
|
|
|
+ buck4 : BUCK_4
|
|
|
+ ldo1 : LDO_1
|
|
|
+ ldo2 : LDO_2
|
|
|
+ ldo3 : LDO_3
|
|
|
+ ldo4 : LDO_4
|
|
|
+
|
|
|
+ The component follows the standard regulator framework and the bindings
|
|
|
+ details of individual regulator device can be found in:
|
|
|
+ Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
+
|
|
|
+
|
|
|
+- watchdog: This node defines the settings for the watchdog driver associated
|
|
|
+ with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added
|
|
|
+ if a node is created.
|
|
|
+
|
|
|
+
|
|
|
+Example:
|
|
|
+
|
|
|
+ pmic0: da9062@58 {
|
|
|
+ compatible = "dlg,da9062";
|
|
|
+ reg = <0x58>;
|
|
|
+ interrupt-parent = <&gpio6>;
|
|
|
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ interrupt-controller;
|
|
|
+
|
|
|
+ watchdog {
|
|
|
+ compatible = "dlg,da9062-watchdog";
|
|
|
+ };
|
|
|
+
|
|
|
+ regulators {
|
|
|
+ DA9062_BUCK1: buck1 {
|
|
|
+ regulator-name = "BUCK1";
|
|
|
+ regulator-min-microvolt = <300000>;
|
|
|
+ regulator-max-microvolt = <1570000>;
|
|
|
+ regulator-min-microamp = <500000>;
|
|
|
+ regulator-max-microamp = <2000000>;
|
|
|
+ regulator-boot-on;
|
|
|
+ };
|
|
|
+ DA9062_LDO1: ldo1 {
|
|
|
+ regulator-name = "LDO_1";
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <3600000>;
|
|
|
+ regulator-boot-on;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
S Twiss