mtd: gpmi: add gpmi support for imx6sx

The gpmi's IP for imx6sx is nearly the same as the gpmi's IP for imx6q,
except the following two new features:

     (1) the new BCH contoller has 62-BIT correcting ECC strength
            (The BCH for imx6q only has 40-BIT ECC strength).

     (2) add the hardware Randomizer support.

This patch does the follow changes:

     (1) add a new macro GPMI_IS_MX6SX to represent the imx6sx's gpmi.

     (2) add a new macro GPMI_IS_MX6.
           We use this macro to initialize the same registers for both
         imx6sx and imx6q, and so on.

     (3) add a new gpmi_devdata instance, the gpmi_devdata_imx6sx, for
         imx6sx.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drivers/mtd/nand/gpmi-nand/bch-regs.h

@@ -54,7 +54,7 @@
 #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
 #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
-	(GPMI_IS_MX6Q(x)					\
+	(GPMI_IS_MX6(x)					\
 		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
 		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
@@ -65,7 +65,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14			\
 				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
 #define BF_BCH_FLASH0LAYOUT0_GF(v, x)				\
-	((GPMI_IS_MX6Q(x) && ((v) == 14))			\
+	((GPMI_IS_MX6(x) && ((v) == 14))			\
 		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14)	\
 		: 0						\
@@ -77,7 +77,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
 			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
 #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
-	(GPMI_IS_MX6Q(x)						\
+	(GPMI_IS_MX6(x)						\
 		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
 		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
 	)
@@ -96,7 +96,7 @@
 #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
 #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
-	(GPMI_IS_MX6Q(x)					\
+	(GPMI_IS_MX6(x)					\
 		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
 		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
@@ -107,7 +107,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14			\
 				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
 #define BF_BCH_FLASH0LAYOUT1_GF(v, x)				\
-	((GPMI_IS_MX6Q(x) && ((v) == 14))			\
+	((GPMI_IS_MX6(x) && ((v) == 14))			\
 		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14)	\
 		: 0						\
@@ -119,7 +119,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
 			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
 #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
-	(GPMI_IS_MX6Q(x)						\
+	(GPMI_IS_MX6(x)						\
 		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
 		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
 	)

drivers/mtd/nand/gpmi-nand/gpmi-lib.c

@@ -971,7 +971,7 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
 	struct nand_chip *chip = &this->nand;
 
 	/* Enable the asynchronous EDO feature. */
-	if (GPMI_IS_MX6Q(this) && chip->onfi_version) {
+	if (GPMI_IS_MX6(this) && chip->onfi_version) {
 		int mode = onfi_get_async_timing_mode(chip);
 
 		/* We only support the timing mode 4 and mode 5. */
@@ -1093,12 +1093,12 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
 	if (GPMI_IS_MX23(this)) {
 		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
 		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
-	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
 		/*
 		 * In the imx6, all the ready/busy pins are bound
 		 * together. So we only need to check chip 0.
 		 */
-		if (GPMI_IS_MX6Q(this))
+		if (GPMI_IS_MX6(this))
 			chip = 0;
 
 		/* MX28 shares the same R/B register as MX6Q. */

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -71,6 +71,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6q = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx6sx = {
+	.type = IS_MX6SX,
+	.bch_max_ecc_strength = 62,
+	.max_chain_delay = 12,
+};
+
 static irqreturn_t bch_irq(int irq, void *cookie)
 {
 	struct gpmi_nand_data *this = cookie;
@@ -583,7 +589,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 	}
 
 	/* Get extra clocks */
-	if (GPMI_IS_MX6Q(this))
+	if (GPMI_IS_MX6(this))
 		extra_clks = extra_clks_for_mx6q;
 	if (!extra_clks)
 		return 0;
@@ -601,9 +607,9 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 		r->clock[i] = clk;
 	}
 
-	if (GPMI_IS_MX6Q(this))
+	if (GPMI_IS_MX6(this))
 		/*
-		 * Set the default value for the gpmi clock in mx6q:
+		 * Set the default value for the gpmi clock.
 		 *
 		 * If you want to use the ONFI nand which is in the
 		 * Synchronous Mode, you should change the clock as you need.
@@ -1666,7 +1672,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	 *  (1) the chip is imx6, and
 	 *  (2) the size of the ECC parity is byte aligned.
 	 */
-	if (GPMI_IS_MX6Q(this) &&
+	if (GPMI_IS_MX6(this) &&
 		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
 		ecc->read_subpage = gpmi_ecc_read_subpage;
 		chip->options |= NAND_SUBPAGE_READ;
@@ -1722,7 +1728,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
-	ret = nand_scan_ident(mtd, GPMI_IS_MX6Q(this) ? 2 : 1, NULL);
+	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
 	if (ret)
 		goto err_out;
 
@@ -1761,6 +1767,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 	}, {
 		.compatible = "fsl,imx6q-gpmi-nand",
 		.data = (void *)&gpmi_devdata_imx6q,
+	}, {
+		.compatible = "fsl,imx6sx-gpmi-nand",
+		.data = (void *)&gpmi_devdata_imx6sx,
 	}, {}
 };
 MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);

drivers/mtd/nand/gpmi-nand/gpmi-nand.h

@@ -122,7 +122,8 @@ struct nand_timing {
 enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
-	IS_MX6Q
+	IS_MX6Q,
+	IS_MX6SX
 };
 
 struct gpmi_devdata {
@@ -298,4 +299,7 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
 #define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
+#define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
+
+#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
 #endif