iio: pressure: st_pressure: inline per-sensor data

We have #defines for all the individual sensor registers and
value/mask pairs #defined at the top of the file and used at
exactly one spot.

This is usually good if the #defines give a meaning to the
opaque magic numbers.

However in this case, the semantic meaning is inherent in the
name of the C99-addressable fields, and that means duplication
of information, and only makes the code hard to maintain since
you every time have to add a new #define AND update the site
where it is to be used.

Get rid of the #defines and just open code the values into the
appropriate struct elements. Make sure to explicitly address
the .hz and .value fields in the st_sensor_odr_avl struct
so that the meaning of all values is clear.

This patch is purely syntactic should have no semantic effect.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/pressure/st_pressure_core.c

@@ -112,115 +112,24 @@
 #define ST_PRESS_1_OUT_XL_ADDR			0x28
 #define ST_TEMP_1_OUT_L_ADDR			0x2b
 
-/*
- * CUSTOM VALUES FOR LPS331AP SENSOR
- * See LPS331AP datasheet:
- * http://www2.st.com/resource/en/datasheet/lps331ap.pdf
- */
-#define ST_PRESS_LPS331AP_WAI_EXP		0xbb
-#define ST_PRESS_LPS331AP_ODR_ADDR		0x20
-#define ST_PRESS_LPS331AP_ODR_MASK		0x70
-#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL	0x01
-#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL	0x05
-#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL	0x06
-#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL	0x07
-#define ST_PRESS_LPS331AP_PW_ADDR		0x20
-#define ST_PRESS_LPS331AP_PW_MASK		0x80
-#define ST_PRESS_LPS331AP_FS_ADDR		0x23
-#define ST_PRESS_LPS331AP_FS_MASK		0x30
-#define ST_PRESS_LPS331AP_BDU_ADDR		0x20
-#define ST_PRESS_LPS331AP_BDU_MASK		0x04
-#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR		0x22
-#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK	0x04
-#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK	0x20
-#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR		0x22
-#define ST_PRESS_LPS331AP_IHL_IRQ_MASK		0x80
-#define ST_PRESS_LPS331AP_OD_IRQ_ADDR		0x22
-#define ST_PRESS_LPS331AP_OD_IRQ_MASK		0x40
-#define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
-
-/*
- * CUSTOM VALUES FOR THE OBSOLETE LPS001WP SENSOR
- */
-
 /* LPS001WP pressure resolution */
 #define ST_PRESS_LPS001WP_LSB_PER_MBAR		16UL
 /* LPS001WP temperature resolution */
 #define ST_PRESS_LPS001WP_LSB_PER_CELSIUS	64UL
-
-#define ST_PRESS_LPS001WP_WAI_EXP		0xba
-#define ST_PRESS_LPS001WP_ODR_ADDR		0x20
-#define ST_PRESS_LPS001WP_ODR_MASK		0x30
-#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL	0x01
-#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL	0x02
-#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL	0x03
-#define ST_PRESS_LPS001WP_PW_ADDR		0x20
-#define ST_PRESS_LPS001WP_PW_MASK		0x40
+/* LPS001WP pressure gain */
 #define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \
 	(100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR)
-#define ST_PRESS_LPS001WP_BDU_ADDR		0x20
-#define ST_PRESS_LPS001WP_BDU_MASK		0x04
-#define ST_PRESS_LPS001WP_MULTIREAD_BIT		true
+/* LPS001WP pressure and temp L addresses */
 #define ST_PRESS_LPS001WP_OUT_L_ADDR		0x28
 #define ST_TEMP_LPS001WP_OUT_L_ADDR		0x2a
 
-/*
- * CUSTOM VALUES FOR LPS25H SENSOR
- * See LPS25H datasheet:
- * http://www2.st.com/resource/en/datasheet/lps25h.pdf
- */
-#define ST_PRESS_LPS25H_WAI_EXP			0xbd
-#define ST_PRESS_LPS25H_ODR_ADDR		0x20
-#define ST_PRESS_LPS25H_ODR_MASK		0x70
-#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL		0x01
-#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL		0x02
-#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL	0x03
-#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL	0x04
-#define ST_PRESS_LPS25H_PW_ADDR			0x20
-#define ST_PRESS_LPS25H_PW_MASK			0x80
-#define ST_PRESS_LPS25H_BDU_ADDR		0x20
-#define ST_PRESS_LPS25H_BDU_MASK		0x04
-#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR		0x23
-#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK	0x01
-#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK	0x10
-#define ST_PRESS_LPS25H_IHL_IRQ_ADDR		0x22
-#define ST_PRESS_LPS25H_IHL_IRQ_MASK		0x80
-#define ST_PRESS_LPS25H_OD_IRQ_ADDR		0x22
-#define ST_PRESS_LPS25H_OD_IRQ_MASK		0x40
-#define ST_PRESS_LPS25H_MULTIREAD_BIT		true
+/* LPS25H pressure and temp L addresses */
 #define ST_PRESS_LPS25H_OUT_XL_ADDR		0x28
 #define ST_TEMP_LPS25H_OUT_L_ADDR		0x2b
 
-/*
- * CUSTOM VALUES FOR LPS22HB SENSOR
- * See LPS22HB datasheet:
- * http://www2.st.com/resource/en/datasheet/lps22hb.pdf
- */
-
 /* LPS22HB temperature sensitivity */
 #define ST_PRESS_LPS22HB_LSB_PER_CELSIUS	100UL
 
-#define ST_PRESS_LPS22HB_WAI_EXP		0xb1
-#define ST_PRESS_LPS22HB_ODR_ADDR		0x10
-#define ST_PRESS_LPS22HB_ODR_MASK		0x70
-#define ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL	0x01
-#define ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL	0x02
-#define ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL	0x03
-#define ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL	0x04
-#define ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL	0x05
-#define ST_PRESS_LPS22HB_PW_ADDR		0x10
-#define ST_PRESS_LPS22HB_PW_MASK		0x70
-#define ST_PRESS_LPS22HB_BDU_ADDR		0x10
-#define ST_PRESS_LPS22HB_BDU_MASK		0x02
-#define ST_PRESS_LPS22HB_DRDY_IRQ_ADDR		0x12
-#define ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK	0x04
-#define ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK	0x08
-#define ST_PRESS_LPS22HB_IHL_IRQ_ADDR		0x12
-#define ST_PRESS_LPS22HB_IHL_IRQ_MASK		0x80
-#define ST_PRESS_LPS22HB_OD_IRQ_ADDR		0x12
-#define ST_PRESS_LPS22HB_OD_IRQ_MASK		0x40
-#define ST_PRESS_LPS22HB_MULTIREAD_BIT		true
-
 static const struct iio_chan_spec st_press_1_channels[] = {
 	{
 		.type = IIO_PRESSURE,
@@ -321,7 +230,12 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = {
 
 static const struct st_sensor_settings st_press_sensors_settings[] = {
 	{
-		.wai = ST_PRESS_LPS331AP_WAI_EXP,
+		/*
+		 * CUSTOM VALUES FOR LPS331AP SENSOR
+		 * See LPS331AP datasheet:
+		 * http://www2.st.com/resource/en/datasheet/lps331ap.pdf
+		 */
+		.wai = 0xbb,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LPS331AP_PRESS_DEV_NAME,
@@ -329,24 +243,24 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.ch = (struct iio_chan_spec *)st_press_1_channels,
 		.num_ch = ARRAY_SIZE(st_press_1_channels),
 		.odr = {
-			.addr = ST_PRESS_LPS331AP_ODR_ADDR,
-			.mask = ST_PRESS_LPS331AP_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x70,
 			.odr_avl = {
-				{ 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, },
-				{ 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, },
-				{ 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, },
-				{ 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, },
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 7, .value = 0x05 },
+				{ .hz = 13, .value = 0x06 },
+				{ .hz = 25, .value = 0x07 },
 			},
 		},
 		.pw = {
-			.addr = ST_PRESS_LPS331AP_PW_ADDR,
-			.mask = ST_PRESS_LPS331AP_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x80,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.fs = {
-			.addr = ST_PRESS_LPS331AP_FS_ADDR,
-			.mask = ST_PRESS_LPS331AP_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				/*
 				 * Pressure and temperature sensitivity values
@@ -360,24 +274,27 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			},
 		},
 		.bdu = {
-			.addr = ST_PRESS_LPS331AP_BDU_ADDR,
-			.mask = ST_PRESS_LPS331AP_BDU_MASK,
+			.addr = 0x20,
+			.mask = 0x04,
 		},
 		.drdy_irq = {
-			.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
-			.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
-			.addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
-			.mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x04,
+			.mask_int2 = 0x20,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.addr_od = 0x22,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_PRESS_LPS001WP_WAI_EXP,
+		/*
+		 * CUSTOM VALUES FOR LPS001WP SENSOR
+		 */
+		.wai = 0xba,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LPS001WP_PRESS_DEV_NAME,
@@ -385,17 +302,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.ch = (struct iio_chan_spec *)st_press_lps001wp_channels,
 		.num_ch = ARRAY_SIZE(st_press_lps001wp_channels),
 		.odr = {
-			.addr = ST_PRESS_LPS001WP_ODR_ADDR,
-			.mask = ST_PRESS_LPS001WP_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x30,
 			.odr_avl = {
-				{ 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, },
-				{ 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, },
-				{ 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, },
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 7, .value = 0x02 },
+				{ .hz = 13, .value = 0x03 },
 			},
 		},
 		.pw = {
-			.addr = ST_PRESS_LPS001WP_PW_ADDR,
-			.mask = ST_PRESS_LPS001WP_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x40,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -413,17 +330,22 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			},
 		},
 		.bdu = {
-			.addr = ST_PRESS_LPS001WP_BDU_ADDR,
-			.mask = ST_PRESS_LPS001WP_BDU_MASK,
+			.addr = 0x20,
+			.mask = 0x04,
 		},
 		.drdy_irq = {
 			.addr = 0,
 		},
-		.multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_PRESS_LPS25H_WAI_EXP,
+		/*
+		 * CUSTOM VALUES FOR LPS25H SENSOR
+		 * See LPS25H datasheet:
+		 * http://www2.st.com/resource/en/datasheet/lps25h.pdf
+		 */
+		.wai = 0xbd,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LPS25H_PRESS_DEV_NAME,
@@ -431,18 +353,18 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.ch = (struct iio_chan_spec *)st_press_1_channels,
 		.num_ch = ARRAY_SIZE(st_press_1_channels),
 		.odr = {
-			.addr = ST_PRESS_LPS25H_ODR_ADDR,
-			.mask = ST_PRESS_LPS25H_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x70,
 			.odr_avl = {
-				{ 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, },
-				{ 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, },
-				{ 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, },
-				{ 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, },
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 7, .value = 0x02 },
+				{ .hz = 13, .value = 0x03 },
+				{ .hz = 25, .value = 0x04 },
 			},
 		},
 		.pw = {
-			.addr = ST_PRESS_LPS25H_PW_ADDR,
-			.mask = ST_PRESS_LPS25H_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x80,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -460,24 +382,29 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			},
 		},
 		.bdu = {
-			.addr = ST_PRESS_LPS25H_BDU_ADDR,
-			.mask = ST_PRESS_LPS25H_BDU_MASK,
+			.addr = 0x20,
+			.mask = 0x04,
 		},
 		.drdy_irq = {
-			.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
-			.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
-			.addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
-			.mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
+			.addr = 0x23,
+			.mask_int1 = 0x01,
+			.mask_int2 = 0x10,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.addr_od = 0x22,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_PRESS_LPS22HB_WAI_EXP,
+		/*
+		 * CUSTOM VALUES FOR LPS22HB SENSOR
+		 * See LPS22HB datasheet:
+		 * http://www2.st.com/resource/en/datasheet/lps22hb.pdf
+		 */
+		.wai = 0xb1,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LPS22HB_PRESS_DEV_NAME,
@@ -485,19 +412,19 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
 		.num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
 		.odr = {
-			.addr = ST_PRESS_LPS22HB_ODR_ADDR,
-			.mask = ST_PRESS_LPS22HB_ODR_MASK,
+			.addr = 0x10,
+			.mask = 0x70,
 			.odr_avl = {
-				{ 1, ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL, },
-				{ 10, ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL, },
-				{ 25, ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL, },
-				{ 75, ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL, },
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 10, .value = 0x02 },
+				{ .hz = 25, .value = 0x03 },
+				{ .hz = 50, .value = 0x04 },
+				{ .hz = 75, .value = 0x05 },
 			},
 		},
 		.pw = {
-			.addr = ST_PRESS_LPS22HB_PW_ADDR,
-			.mask = ST_PRESS_LPS22HB_PW_MASK,
+			.addr = 0x10,
+			.mask = 0x70,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.fs = {
@@ -514,20 +441,20 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			},
 		},
 		.bdu = {
-			.addr = ST_PRESS_LPS22HB_BDU_ADDR,
-			.mask = ST_PRESS_LPS22HB_BDU_MASK,
+			.addr = 0x10,
+			.mask = 0x02,
 		},
 		.drdy_irq = {
-			.addr = ST_PRESS_LPS22HB_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_PRESS_LPS22HB_IHL_IRQ_ADDR,
-			.mask_ihl = ST_PRESS_LPS22HB_IHL_IRQ_MASK,
-			.addr_od = ST_PRESS_LPS22HB_OD_IRQ_ADDR,
-			.mask_od = ST_PRESS_LPS22HB_OD_IRQ_MASK,
+			.addr = 0x12,
+			.mask_int1 = 0x04,
+			.mask_int2 = 0x08,
+			.addr_ihl = 0x12,
+			.mask_ihl = 0x80,
+			.addr_od = 0x12,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_PRESS_LPS22HB_MULTIREAD_BIT,
+		.multi_read_bit = true,
 	},
 };