arm64: dts: marvell: add sdhci support for Armada 7K/8K

Also enable it on the Armada 7040 DB and Armada 8040 DB boards.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -147,6 +147,20 @@
 	status = "okay";
 };
 
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cpm_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
 &cpm_mdio {
 	phy0: ethernet-phy@0 {
 		reg = <0>;

arch/arm64/boot/dts/marvell/armada-8040-db.dts

@@ -164,3 +164,15 @@
 &cps_usb3_1 {
 	status = "okay";
 };
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+};
+
+&cpm_sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+};

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -229,6 +229,17 @@
 
 			};
 
+			ap_sdhci0: sdhci@6e0000 {
+				compatible = "marvell,armada-ap806-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&ap_syscon 4>;
+				dma-coherent;
+				marvell,xenon-phy-slow-mode;
+				status = "disabled";
+			};
+
 			ap_syscon: system-controller@6f4000 {
 				compatible = "marvell,ap806-system-controller",
 					     "syscon";

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -217,6 +217,17 @@
 				clocks = <&cpm_syscon0 1 25>;
 				status = "okay";
 			};
+
+			cpm_sdhci0: sdhci@780000 {
+				compatible = "marvell,armada-cp110-sdhci";
+				reg = <0x780000 0x300>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&cpm_syscon0 1 4>;
+				dma-coherent;
+				status = "disabled";
+			};
+
 		};
 
 		cpm_pcie0: pcie@f2600000 {