mtd: nand: sunxi: switch from manual to automated timing config

The NAND framework is now able to select the best NAND timings for us.
All we have to do is implement a ->setup_data_interface() function to
apply those timings and remove the timing selection code from the sunxi
driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drivers/mtd/nand/sunxi_nand.c

@@ -1572,14 +1572,22 @@ static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration,
 #define sunxi_nand_lookup_timing(l, p, c) \
 			_sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
 
-static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
-				       const struct nand_sdr_timings *timings)
+static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd,
+					const struct nand_data_interface *conf,
+					bool check_only)
 {
+	struct nand_chip *nand = mtd_to_nand(mtd);
+	struct sunxi_nand_chip *chip = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller);
+	const struct nand_sdr_timings *timings;
 	u32 min_clk_period = 0;
 	s32 tWB, tADL, tWHR, tRHW, tCAD;
 	long real_clk_rate;
 
+	timings = nand_get_sdr_timings(conf);
+	if (IS_ERR(timings))
+		return -ENOTSUPP;
+
 	/* T1 <=> tCLS */
 	if (timings->tCLS_min > min_clk_period)
 		min_clk_period = timings->tCLS_min;
@@ -1679,6 +1687,9 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 		return tRHW;
 	}
 
+	if (check_only)
+		return 0;
+
 	/*
 	 * TODO: according to ONFI specs this value only applies for DDR NAND,
 	 * but Allwinner seems to set this to 0x7. Mimic them for now.
@@ -1712,44 +1723,6 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 	return 0;
 }
 
-static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
-					struct device_node *np)
-{
-	struct mtd_info *mtd = nand_to_mtd(&chip->nand);
-	const struct nand_sdr_timings *timings;
-	int ret;
-	int mode;
-
-	mode = onfi_get_async_timing_mode(&chip->nand);
-	if (mode == ONFI_TIMING_MODE_UNKNOWN) {
-		mode = chip->nand.onfi_timing_mode_default;
-	} else {
-		uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
-		int i;
-
-		mode = fls(mode) - 1;
-		if (mode < 0)
-			mode = 0;
-
-		feature[0] = mode;
-		for (i = 0; i < chip->nsels; i++) {
-			chip->nand.select_chip(mtd, i);
-			ret = chip->nand.onfi_set_features(mtd,	&chip->nand,
-						ONFI_FEATURE_ADDR_TIMING_MODE,
-						feature);
-			chip->nand.select_chip(mtd, -1);
-			if (ret)
-				return ret;
-		}
-	}
-
-	timings = onfi_async_timing_mode_to_sdr_timings(mode);
-	if (IS_ERR(timings))
-		return PTR_ERR(timings);
-
-	return sunxi_nand_chip_set_timings(chip, timings);
-}
-
 static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
 				    struct mtd_oob_region *oobregion)
 {
@@ -1975,7 +1948,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
 static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 				struct device_node *np)
 {
-	const struct nand_sdr_timings *timings;
 	struct sunxi_nand_chip *chip;
 	struct mtd_info *mtd;
 	struct nand_chip *nand;
@@ -2065,25 +2037,11 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 	nand->read_buf = sunxi_nfc_read_buf;
 	nand->write_buf = sunxi_nfc_write_buf;
 	nand->read_byte = sunxi_nfc_read_byte;
+	nand->setup_data_interface = sunxi_nfc_setup_data_interface;
 
 	mtd = nand_to_mtd(nand);
 	mtd->dev.parent = dev;
 
-	timings = onfi_async_timing_mode_to_sdr_timings(0);
-	if (IS_ERR(timings)) {
-		ret = PTR_ERR(timings);
-		dev_err(dev,
-			"could not retrieve timings for ONFI mode 0: %d\n",
-			ret);
-		return ret;
-	}
-
-	ret = sunxi_nand_chip_set_timings(chip, timings);
-	if (ret) {
-		dev_err(dev, "could not configure chip timings: %d\n", ret);
-		return ret;
-	}
-
 	ret = nand_scan_ident(mtd, nsels, NULL);
 	if (ret)
 		return ret;
@@ -2096,12 +2054,6 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 
 	nand->options |= NAND_SUBPAGE_READ;
 
-	ret = sunxi_nand_chip_init_timings(chip, np);
-	if (ret) {
-		dev_err(dev, "could not configure chip timings: %d\n", ret);
-		return ret;
-	}
-
 	ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
 	if (ret) {
 		dev_err(dev, "ECC init failed: %d\n", ret);