drm/sun4i: Use values calculated by atomic check

Now that we have properly clipped coordinates in plane state structure,
use them.

This also fixes bug where source x and y were adjusted for negative
value, but width and height weren't. It wasn't discovered because
primary plane usually doesn't have negative coordinates.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-13-jernej.skrabec@siol.net

drivers/gpu/drm/sun4i/sun8i_layer.c

@@ -69,6 +69,12 @@ static void sun8i_mixer_layer_atomic_update(struct drm_plane *plane,
 	struct sun8i_layer *layer = plane_to_sun8i_layer(plane);
 	struct sun8i_mixer *mixer = layer->mixer;
 
+	if (!plane->state->visible) {
+		sun8i_mixer_layer_enable(mixer, layer->channel,
+					 layer->overlay, false);
+		return;
+	}
+
 	sun8i_mixer_update_layer_coord(mixer, layer->channel,
 				       layer->overlay, plane);
 	sun8i_mixer_update_layer_formats(mixer, layer->channel,

drivers/gpu/drm/sun4i/sun8i_mixer.c

@@ -92,28 +92,34 @@ int sun8i_mixer_update_layer_coord(struct sun8i_mixer *mixer, int channel,
 {
 	struct drm_plane_state *state = plane->state;
 	struct drm_framebuffer *fb = state->fb;
+	u32 width, height, size;
 
 	DRM_DEBUG_DRIVER("Updating channel %d overlay %d\n", channel, overlay);
 
+	/*
+	 * Same source and destination width and height are guaranteed
+	 * by atomic check function.
+	 */
+	width = drm_rect_width(&state->dst);
+	height = drm_rect_height(&state->dst);
+	size = SUN8I_MIXER_SIZE(width, height);
+
 	if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
 		DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n",
-				 state->crtc_w, state->crtc_h);
-		regmap_write(mixer->engine.regs, SUN8I_MIXER_GLOBAL_SIZE,
-			     SUN8I_MIXER_SIZE(state->crtc_w,
-					      state->crtc_h));
+				 width, height);
+		regmap_write(mixer->engine.regs,
+			     SUN8I_MIXER_GLOBAL_SIZE,
+			     size);
 		DRM_DEBUG_DRIVER("Updating blender size\n");
 		regmap_write(mixer->engine.regs,
 			     SUN8I_MIXER_BLEND_ATTR_INSIZE(channel),
-			     SUN8I_MIXER_SIZE(state->crtc_w,
-					      state->crtc_h));
+			     size);
 		regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_OUTSIZE,
-			     SUN8I_MIXER_SIZE(state->crtc_w,
-					      state->crtc_h));
+			     size);
 		DRM_DEBUG_DRIVER("Updating channel size\n");
 		regmap_write(mixer->engine.regs,
 			     SUN8I_MIXER_CHAN_UI_OVL_SIZE(channel),
-			     SUN8I_MIXER_SIZE(state->crtc_w,
-					      state->crtc_h));
+			     size);
 	}
 
 	/* Set the line width */
@@ -123,18 +129,17 @@ int sun8i_mixer_update_layer_coord(struct sun8i_mixer *mixer, int channel,
 		     fb->pitches[0]);
 
 	/* Set height and width */
-	DRM_DEBUG_DRIVER("Layer size W: %u H: %u\n",
-			 state->crtc_w, state->crtc_h);
+	DRM_DEBUG_DRIVER("Layer size W: %u H: %u\n", width, height);
 	regmap_write(mixer->engine.regs,
 		     SUN8I_MIXER_CHAN_UI_LAYER_SIZE(channel, overlay),
-		     SUN8I_MIXER_SIZE(state->crtc_w, state->crtc_h));
+		     size);
 
 	/* Set base coordinates */
 	DRM_DEBUG_DRIVER("Layer coordinates X: %d Y: %d\n",
-			 state->crtc_x, state->crtc_y);
+			 state->dst.x1, state->dst.y1);
 	regmap_write(mixer->engine.regs,
 		     SUN8I_MIXER_BLEND_ATTR_COORD(channel),
-		     SUN8I_MIXER_COORD(state->crtc_x, state->crtc_y));
+		     SUN8I_MIXER_COORD(state->dst.x1, state->dst.y1));
 
 	return 0;
 }
@@ -194,21 +199,8 @@ int sun8i_mixer_update_layer_buffer(struct sun8i_mixer *mixer, int channel,
 	paddr = gem->paddr + fb->offsets[0];
 
 	/* Fixup framebuffer address for src coordinates */
-	paddr += (state->src_x >> 16) * bpp;
-	paddr += (state->src_y >> 16) * fb->pitches[0];
-
-	/*
-	 * The hardware cannot correctly deal with negative crtc
-	 * coordinates, the display is cropped to the requested size,
-	 * but the display content is not moved.
-	 * Manually move the display content by fixup the framebuffer
-	 * address when crtc_x or crtc_y is negative, like what we
-	 * have did for src_x and src_y.
-	 */
-	if (state->crtc_x < 0)
-		paddr += -state->crtc_x * bpp;
-	if (state->crtc_y < 0)
-		paddr += -state->crtc_y * fb->pitches[0];
+	paddr += (state->src.x1 >> 16) * bpp;
+	paddr += (state->src.y1 >> 16) * fb->pitches[0];
 
 	DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);