Blackfin: defconfigs: update after misc devices defaulted to N

The default value for misc devices was changed from Y to N which
causes problems for mini defconfigs that were relying on this
defaulting to Y.  So update all of the defconfigs accordingly.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

arch/blackfin/configs/BF527-AD7160-EVAL_defconfig

@@ -46,7 +46,6 @@ CONFIG_UNIX=y
 # CONFIG_WIRELESS is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -70,7 +70,6 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_NAND=m
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=y
 CONFIG_SMSC_PHY=y

arch/blackfin/configs/BF561-ACVILON_defconfig

@@ -63,7 +63,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y

arch/blackfin/configs/BlackStamp_defconfig

@@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y

arch/blackfin/configs/CM-BF527_defconfig

@@ -64,7 +64,6 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_GPIO_ADDR=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set

arch/blackfin/configs/CM-BF533_defconfig

@@ -44,7 +44,6 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set

arch/blackfin/configs/CM-BF548_defconfig

@@ -63,7 +63,6 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set

arch/blackfin/configs/DNP5370_defconfig

@@ -55,7 +55,6 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_NET_ETHERNET=y

arch/blackfin/configs/H8606_defconfig

@@ -45,6 +45,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_M25P80=y
 # CONFIG_M25PXX_USE_FAST_READ is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y

arch/blackfin/configs/SRV1_defconfig

@@ -48,6 +48,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_MTD_NAND=m
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=m
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set