Merge remote-tracking branches 'regulator/topic/arizona', 'regulator/topic/axp20' and 'regulator/topic/bcm590xx' into regulator-next

Documentation/devicetree/bindings/mfd/bcm590xx.txt

@@ -19,7 +19,9 @@ Optional child nodes:
   The valid regulator node names for BCM59056 are:
   	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
 	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
-	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr
+	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
+	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
+	vbus
 
 Example:
 	pmu: bcm59056@8 {

drivers/mfd/arizona-core.c

@@ -508,19 +508,31 @@ int arizona_of_get_type(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(arizona_of_get_type);
 
+int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
+			      bool mandatory)
+{
+	int gpio;
+
+	gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0);
+	if (gpio < 0) {
+		if (mandatory)
+			dev_err(arizona->dev,
+				"Mandatory DT gpio %s missing/malformed: %d\n",
+				prop, gpio);
+
+		gpio = 0;
+	}
+
+	return gpio;
+}
+EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
+
 static int arizona_of_get_core_pdata(struct arizona *arizona)
 {
+	struct arizona_pdata *pdata = &arizona->pdata;
 	int ret, i;
 
-	arizona->pdata.reset = of_get_named_gpio(arizona->dev->of_node,
-						 "wlf,reset", 0);
-	if (arizona->pdata.reset < 0)
-		arizona->pdata.reset = 0;
-
-	arizona->pdata.ldoena = of_get_named_gpio(arizona->dev->of_node,
-						  "wlf,ldoena", 0);
-	if (arizona->pdata.ldoena < 0)
-		arizona->pdata.ldoena = 0;
+	pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
 
 	ret = of_property_read_u32_array(arizona->dev->of_node,
 					 "wlf,gpio-defaults",
@@ -652,6 +664,9 @@ int arizona_dev_init(struct arizona *arizona)
 		return -EINVAL;
 	}
 
+	/* Mark DCVDD as external, LDO1 driver will clear if internal */
+	arizona->external_dcvdd = true;
+
 	ret = mfd_add_devices(arizona->dev, -1, early_devs,
 			      ARRAY_SIZE(early_devs), NULL, 0, NULL);
 	if (ret != 0) {
@@ -851,14 +866,6 @@ int arizona_dev_init(struct arizona *arizona)
 			     arizona->pdata.gpio_defaults[i]);
 	}
 
-	/*
-	 * LDO1 can only be used to supply DCVDD so if it has no
-	 * consumers then DCVDD is supplied externally.
-	 */
-	if (arizona->pdata.ldo1 &&
-	    arizona->pdata.ldo1->num_consumer_supplies == 0)
-		arizona->external_dcvdd = true;
-
 	pm_runtime_set_autosuspend_delay(arizona->dev, 100);
 	pm_runtime_use_autosuspend(arizona->dev);
 	pm_runtime_enable(arizona->dev);

drivers/mfd/bcm590xx.c

@@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = {
 	},
 };
 
-static const struct regmap_config bcm590xx_regmap_config = {
+static const struct regmap_config bcm590xx_regmap_config_pri = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
-	.max_register	= BCM590XX_MAX_REGISTER,
+	.max_register	= BCM590XX_MAX_REGISTER_PRI,
 	.cache_type	= REGCACHE_RBTREE,
 };
 
-static int bcm590xx_i2c_probe(struct i2c_client *i2c,
+static const struct regmap_config bcm590xx_regmap_config_sec = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= BCM590XX_MAX_REGISTER_SEC,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
 			      const struct i2c_device_id *id)
 {
 	struct bcm590xx *bcm590xx;
 	int ret;
 
-	bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
+	bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
 	if (!bcm590xx)
 		return -ENOMEM;
 
-	i2c_set_clientdata(i2c, bcm590xx);
-	bcm590xx->dev = &i2c->dev;
-	bcm590xx->i2c_client = i2c;
+	i2c_set_clientdata(i2c_pri, bcm590xx);
+	bcm590xx->dev = &i2c_pri->dev;
+	bcm590xx->i2c_pri = i2c_pri;
 
-	bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
-	if (IS_ERR(bcm590xx->regmap)) {
-		ret = PTR_ERR(bcm590xx->regmap);
-		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+	bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
+						 &bcm590xx_regmap_config_pri);
+	if (IS_ERR(bcm590xx->regmap_pri)) {
+		ret = PTR_ERR(bcm590xx->regmap_pri);
+		dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
 		return ret;
 	}
 
-	ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
+	/* Secondary I2C slave address is the base address with A(2) asserted */
+	bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
+					  i2c_pri->addr | BIT(2));
+	if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) {
+		dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
+		return -ENODEV;
+	}
+	i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
+
+	bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
+						&bcm590xx_regmap_config_sec);
+	if (IS_ERR(bcm590xx->regmap_sec)) {
+		ret = PTR_ERR(bcm590xx->regmap_sec);
+		dev_err(&bcm590xx->i2c_sec->dev,
+			"secondary regmap init failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
 			      ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
-	if (ret < 0)
-		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+	if (ret < 0) {
+		dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
 
+err:
+	i2c_unregister_device(bcm590xx->i2c_sec);
 	return ret;
 }
 

drivers/mfd/tps65090.c

@@ -32,14 +32,6 @@
 #define NUM_INT_REG 2
 #define TOTAL_NUM_REG 0x18
 
-/* interrupt status registers */
-#define TPS65090_INT_STS	0x0
-#define TPS65090_INT_STS2	0x1
-
-/* interrupt mask registers */
-#define TPS65090_INT_MSK	0x2
-#define TPS65090_INT_MSK2	0x3
-
 #define TPS65090_INT1_MASK_VAC_STATUS_CHANGE		1
 #define TPS65090_INT1_MASK_VSYS_STATUS_CHANGE		2
 #define TPS65090_INT1_MASK_BAT_STATUS_CHANGE		3
@@ -64,11 +56,16 @@ static struct resource charger_resources[] = {
 	}
 };
 
-static const struct mfd_cell tps65090s[] = {
-	{
+enum tps65090_cells {
+	PMIC = 0,
+	CHARGER = 1,
+};
+
+static struct mfd_cell tps65090s[] = {
+	[PMIC] = {
 		.name = "tps65090-pmic",
 	},
-	{
+	[CHARGER] = {
 		.name = "tps65090-charger",
 		.num_resources = ARRAY_SIZE(charger_resources),
 		.resources = &charger_resources[0],
@@ -139,17 +136,26 @@ static struct regmap_irq_chip tps65090_irq_chip = {
 	.irqs = tps65090_irqs,
 	.num_irqs = ARRAY_SIZE(tps65090_irqs),
 	.num_regs = NUM_INT_REG,
-	.status_base = TPS65090_INT_STS,
-	.mask_base = TPS65090_INT_MSK,
+	.status_base = TPS65090_REG_INTR_STS,
+	.mask_base = TPS65090_REG_INTR_MASK,
 	.mask_invert = true,
 };
 
 static bool is_volatile_reg(struct device *dev, unsigned int reg)
 {
-	if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS2))
-		return true;
-	else
+	/* Nearly all registers have status bits mixed in, except a few */
+	switch (reg) {
+	case TPS65090_REG_INTR_MASK:
+	case TPS65090_REG_INTR_MASK2:
+	case TPS65090_REG_CG_CTRL0:
+	case TPS65090_REG_CG_CTRL1:
+	case TPS65090_REG_CG_CTRL2:
+	case TPS65090_REG_CG_CTRL3:
+	case TPS65090_REG_CG_CTRL4:
+	case TPS65090_REG_CG_CTRL5:
 		return false;
+	}
+	return true;
 }
 
 static const struct regmap_config tps65090_regmap_config = {
@@ -211,6 +217,9 @@ static int tps65090_i2c_probe(struct i2c_client *client,
 					"IRQ init failed with err: %d\n", ret);
 			return ret;
 		}
+	} else {
+		/* Don't tell children they have an IRQ that'll never fire */
+		tps65090s[CHARGER].num_resources = 0;
 	}
 
 	ret = mfd_add_devices(tps65090->dev, -1, tps65090s,

drivers/power/tps65090-charger.c

@@ -28,17 +28,6 @@
 
 #include <linux/mfd/tps65090.h>
 
-#define TPS65090_REG_INTR_STS	0x00
-#define TPS65090_REG_INTR_MASK	0x02
-#define TPS65090_REG_CG_CTRL0	0x04
-#define TPS65090_REG_CG_CTRL1	0x05
-#define TPS65090_REG_CG_CTRL2	0x06
-#define TPS65090_REG_CG_CTRL3	0x07
-#define TPS65090_REG_CG_CTRL4	0x08
-#define TPS65090_REG_CG_CTRL5	0x09
-#define TPS65090_REG_CG_STATUS1	0x0a
-#define TPS65090_REG_CG_STATUS2	0x0b
-
 #define TPS65090_CHARGER_ENABLE	BIT(0)
 #define TPS65090_VACG		BIT(1)
 #define TPS65090_NOITERM	BIT(5)

drivers/regulator/Kconfig

@@ -139,6 +139,13 @@ config REGULATOR_AS3722
 	  AS3722 PMIC. This will enable support for all the software
 	  controllable DCDC/LDO regulators.
 
+config REGULATOR_AXP20X
+	tristate "X-POWERS AXP20X PMIC Regulators"
+	depends on MFD_AXP20X
+	help
+	  This driver provides support for the voltage regulators on the
+	  AXP20X PMIC.
+
 config REGULATOR_BCM590XX
 	tristate "Broadcom BCM590xx PMU Regulators"
 	depends on MFD_BCM590XX

drivers/regulator/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
 obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o

drivers/regulator/arizona-ldo1.c

@@ -16,9 +16,11 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/err.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
@@ -178,6 +180,42 @@ static const struct regulator_init_data arizona_ldo1_default = {
 	.num_consumer_supplies = 1,
 };
 
+static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
+				     struct regulator_config *config)
+{
+	struct arizona_pdata *pdata = &arizona->pdata;
+	struct arizona_ldo1 *ldo1 = config->driver_data;
+	struct device_node *init_node, *dcvdd_node;
+	struct regulator_init_data *init_data;
+
+	pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
+
+	init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
+	dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
+
+	if (init_node) {
+		config->of_node = init_node;
+
+		init_data = of_get_regulator_init_data(arizona->dev, init_node);
+
+		if (init_data) {
+			init_data->consumer_supplies = &ldo1->supply;
+			init_data->num_consumer_supplies = 1;
+
+			if (dcvdd_node && dcvdd_node != init_node)
+				arizona->external_dcvdd = true;
+
+			pdata->ldo1 = init_data;
+		}
+	} else if (dcvdd_node) {
+		arizona->external_dcvdd = true;
+	}
+
+	of_node_put(dcvdd_node);
+
+	return 0;
+}
+
 static int arizona_ldo1_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@@ -186,6 +224,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	struct arizona_ldo1 *ldo1;
 	int ret;
 
+	arizona->external_dcvdd = false;
+
 	ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
 	if (!ldo1)
 		return -ENOMEM;
@@ -216,6 +256,15 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	config.dev = arizona->dev;
 	config.driver_data = ldo1;
 	config.regmap = arizona->regmap;
+
+	if (IS_ENABLED(CONFIG_OF)) {
+		if (!dev_get_platdata(arizona->dev)) {
+			ret = arizona_ldo1_of_get_pdata(arizona, &config);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
 	config.ena_gpio = arizona->pdata.ldoena;
 
 	if (arizona->pdata.ldo1)
@@ -223,6 +272,13 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	else
 		config.init_data = &ldo1->init_data;
 
+	/*
+	 * LDO1 can only be used to supply DCVDD so if it has no
+	 * consumers then DCVDD is supplied externally.
+	 */
+	if (config.init_data->num_consumer_supplies == 0)
+		arizona->external_dcvdd = true;
+
 	ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
 	if (IS_ERR(ldo1->regulator)) {
 		ret = PTR_ERR(ldo1->regulator);
@@ -231,6 +287,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	of_node_put(config.of_node);
+
 	platform_set_drvdata(pdev, ldo1);
 
 	return 0;

drivers/regulator/arizona-micsupp.c

@@ -16,9 +16,11 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/err.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
@@ -195,6 +197,32 @@ static const struct regulator_init_data arizona_micsupp_ext_default = {
 	.num_consumer_supplies = 1,
 };
 
+static int arizona_micsupp_of_get_pdata(struct arizona *arizona,
+					struct regulator_config *config)
+{
+	struct arizona_pdata *pdata = &arizona->pdata;
+	struct arizona_micsupp *micsupp = config->driver_data;
+	struct device_node *np;
+	struct regulator_init_data *init_data;
+
+	np = of_get_child_by_name(arizona->dev->of_node, "micvdd");
+
+	if (np) {
+		config->of_node = np;
+
+		init_data = of_get_regulator_init_data(arizona->dev, np);
+
+		if (init_data) {
+			init_data->consumer_supplies = &micsupp->supply;
+			init_data->num_consumer_supplies = 1;
+
+			pdata->micvdd = init_data;
+		}
+	}
+
+	return 0;
+}
+
 static int arizona_micsupp_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@@ -234,6 +262,14 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 	config.driver_data = micsupp;
 	config.regmap = arizona->regmap;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		if (!dev_get_platdata(arizona->dev)) {
+			ret = arizona_micsupp_of_get_pdata(arizona, &config);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
 	if (arizona->pdata.micvdd)
 		config.init_data = arizona->pdata.micvdd;
 	else
@@ -253,6 +289,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	of_node_put(config.of_node);
+
 	platform_set_drvdata(pdev, micsupp);
 
 	return 0;

drivers/regulator/axp20x-regulator.c

@@ -0,0 +1,286 @@
+/*
+ * AXP20x regulators driver.
+ *
+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define AXP20X_IO_ENABLED		0x03
+#define AXP20X_IO_DISABLED		0x07
+
+#define AXP20X_WORKMODE_DCDC2_MASK	BIT(2)
+#define AXP20X_WORKMODE_DCDC3_MASK	BIT(1)
+
+#define AXP20X_FREQ_DCDC_MASK		0x0f
+
+#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg,   \
+		       _emask, _enable_val, _disable_val)			\
+	[AXP20X_##_id] = {							\
+		.name		= #_id,						\
+		.supply_name	= (_supply),					\
+		.type		= REGULATOR_VOLTAGE,				\
+		.id		= AXP20X_##_id,					\
+		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
+		.owner		= THIS_MODULE,					\
+		.min_uV		= (_min) * 1000,				\
+		.uV_step	= (_step) * 1000,				\
+		.vsel_reg	= (_vreg),					\
+		.vsel_mask	= (_vmask),					\
+		.enable_reg	= (_ereg),					\
+		.enable_mask	= (_emask),					\
+		.enable_val	= (_enable_val),				\
+		.disable_val	= (_disable_val),				\
+		.ops		= &axp20x_ops,					\
+	}
+
+#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg,	\
+		    _emask) 							\
+	[AXP20X_##_id] = {							\
+		.name		= #_id,						\
+		.supply_name	= (_supply),					\
+		.type		= REGULATOR_VOLTAGE,				\
+		.id		= AXP20X_##_id,					\
+		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
+		.owner		= THIS_MODULE,					\
+		.min_uV		= (_min) * 1000,				\
+		.uV_step	= (_step) * 1000,				\
+		.vsel_reg	= (_vreg),					\
+		.vsel_mask	= (_vmask),					\
+		.enable_reg	= (_ereg),					\
+		.enable_mask	= (_emask),					\
+		.ops		= &axp20x_ops,					\
+	}
+
+#define AXP20X_DESC_FIXED(_id, _supply, _volt)					\
+	[AXP20X_##_id] = {							\
+		.name		= #_id,						\
+		.supply_name	= (_supply),					\
+		.type		= REGULATOR_VOLTAGE,				\
+		.id		= AXP20X_##_id,					\
+		.n_voltages	= 1,						\
+		.owner		= THIS_MODULE,					\
+		.min_uV		= (_volt) * 1000,				\
+		.ops		= &axp20x_ops_fixed				\
+	}
+
+#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask)	\
+	[AXP20X_##_id] = {							\
+		.name		= #_id,						\
+		.supply_name	= (_supply),					\
+		.type		= REGULATOR_VOLTAGE,				\
+		.id		= AXP20X_##_id,					\
+		.n_voltages	= ARRAY_SIZE(_table),				\
+		.owner		= THIS_MODULE,					\
+		.vsel_reg	= (_vreg),					\
+		.vsel_mask	= (_vmask),					\
+		.enable_reg	= (_ereg),					\
+		.enable_mask	= (_emask),					\
+		.volt_table	= (_table),					\
+		.ops		= &axp20x_ops_table,				\
+	}
+
+static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000,
+					1700000, 1800000, 1900000, 2000000, 2500000,
+					2700000, 2800000, 3000000, 3100000, 3200000,
+					3300000 };
+
+static struct regulator_ops axp20x_ops_fixed = {
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+static struct regulator_ops axp20x_ops_table = {
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_ascend,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops axp20x_ops = {
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static const struct regulator_desc axp20x_regulators[] = {
+	AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
+		    AXP20X_PWR_OUT_CTRL, 0x10),
+	AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
+		    AXP20X_PWR_OUT_CTRL, 0x02),
+	AXP20X_DESC_FIXED(LDO1, "acin", 1300),
+	AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
+		    AXP20X_PWR_OUT_CTRL, 0x04),
+	AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
+		    AXP20X_PWR_OUT_CTRL, 0x40),
+	AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
+			  AXP20X_PWR_OUT_CTRL, 0x08),
+	AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
+		       AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
+		       AXP20X_IO_DISABLED),
+};
+
+#define AXP_MATCH(_name, _id) \
+	[AXP20X_##_id] = { \
+		.name		= #_name, \
+		.driver_data	= (void *) &axp20x_regulators[AXP20X_##_id], \
+	}
+
+static struct of_regulator_match axp20x_matches[] = {
+	AXP_MATCH(dcdc2, DCDC2),
+	AXP_MATCH(dcdc3, DCDC3),
+	AXP_MATCH(ldo1, LDO1),
+	AXP_MATCH(ldo2, LDO2),
+	AXP_MATCH(ldo3, LDO3),
+	AXP_MATCH(ldo4, LDO4),
+	AXP_MATCH(ldo5, LDO5),
+};
+
+static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
+{
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+	if (dcdcfreq < 750) {
+		dcdcfreq = 750;
+		dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n");
+	}
+
+	if (dcdcfreq > 1875) {
+		dcdcfreq = 1875;
+		dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n");
+	}
+
+	dcdcfreq = (dcdcfreq - 750) / 75;
+
+	return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
+				  AXP20X_FREQ_DCDC_MASK, dcdcfreq);
+}
+
+static int axp20x_regulator_parse_dt(struct platform_device *pdev)
+{
+	struct device_node *np, *regulators;
+	int ret;
+	u32 dcdcfreq;
+
+	np = of_node_get(pdev->dev.parent->of_node);
+	if (!np)
+		return 0;
+
+	regulators = of_get_child_by_name(np, "regulators");
+	if (!regulators) {
+		dev_warn(&pdev->dev, "regulators node not found\n");
+	} else {
+		ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
+					 ARRAY_SIZE(axp20x_matches));
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
+			return ret;
+		}
+
+		dcdcfreq = 1500;
+		of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
+		ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
+			return ret;
+		}
+
+		of_node_put(regulators);
+	}
+
+	return 0;
+}
+
+static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
+{
+	unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
+
+	if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
+		return -EINVAL;
+
+	if (id == AXP20X_DCDC3)
+		mask = AXP20X_WORKMODE_DCDC3_MASK;
+
+	workmode <<= ffs(mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
+}
+
+static int axp20x_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev;
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+	struct regulator_init_data *init_data;
+	int ret, i;
+	u32 workmode;
+
+	ret = axp20x_regulator_parse_dt(pdev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
+		init_data = axp20x_matches[i].init_data;
+
+		config.dev = &pdev->dev;
+		config.init_data = init_data;
+		config.regmap = axp20x->regmap;
+		config.of_node = axp20x_matches[i].of_node;
+
+		rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register %s\n",
+				axp20x_regulators[i].name);
+
+			return PTR_ERR(rdev);
+		}
+
+		ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode",
+					   &workmode);
+		if (!ret) {
+			if (axp20x_set_dcdc_workmode(rdev, i, workmode))
+				dev_err(&pdev->dev, "Failed to set workmode on %s\n",
+					axp20x_regulators[i].name);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver axp20x_regulator_driver = {
+	.probe	= axp20x_regulator_probe,
+	.driver	= {
+		.name		= "axp20x-regulator",
+		.owner		= THIS_MODULE,
+	},
+};
+
+module_platform_driver(axp20x_regulator_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");

drivers/regulator/bcm590xx-regulator.c

@@ -22,7 +22,7 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/slab.h>
 
-/* Register defs */
+/* I2C slave 0 registers */
 #define BCM590XX_RFLDOPMCTRL1	0x60
 #define BCM590XX_IOSR1PMCTRL1	0x7a
 #define BCM590XX_IOSR2PMCTRL1	0x7c
@@ -31,13 +31,34 @@
 #define BCM590XX_SDSR2PMCTRL1	0x86
 #define BCM590XX_MSRPMCTRL1	0x8a
 #define BCM590XX_VSRPMCTRL1	0x8e
-#define BCM590XX_REG_ENABLE	BIT(7)
-
 #define BCM590XX_RFLDOCTRL	0x96
 #define BCM590XX_CSRVOUT1	0xc0
+
+/* I2C slave 1 registers */
+#define BCM590XX_GPLDO5PMCTRL1	0x16
+#define BCM590XX_GPLDO6PMCTRL1	0x18
+#define BCM590XX_GPLDO1CTRL	0x1a
+#define BCM590XX_GPLDO2CTRL	0x1b
+#define BCM590XX_GPLDO3CTRL	0x1c
+#define BCM590XX_GPLDO4CTRL	0x1d
+#define BCM590XX_GPLDO5CTRL	0x1e
+#define BCM590XX_GPLDO6CTRL	0x1f
+#define BCM590XX_OTG_CTRL	0x40
+#define BCM590XX_GPLDO1PMCTRL1	0x57
+#define BCM590XX_GPLDO2PMCTRL1	0x59
+#define BCM590XX_GPLDO3PMCTRL1	0x5b
+#define BCM590XX_GPLDO4PMCTRL1	0x5d
+
+#define BCM590XX_REG_ENABLE	BIT(7)
+#define BCM590XX_VBUS_ENABLE	BIT(2)
 #define BCM590XX_LDO_VSEL_MASK	GENMASK(5, 3)
 #define BCM590XX_SR_VSEL_MASK	GENMASK(5, 0)
 
+/*
+ * RFLDO to VSR regulators are
+ * accessed via I2C slave 0
+ */
+
 /* LDO regulator IDs */
 #define BCM590XX_REG_RFLDO	0
 #define BCM590XX_REG_CAMLDO1	1
@@ -62,9 +83,25 @@
 #define BCM590XX_REG_SDSR2	18
 #define BCM590XX_REG_VSR	19
 
-#define BCM590XX_NUM_REGS	20
+/*
+ * GPLDO1 to VBUS regulators are
+ * accessed via I2C slave 1
+ */
+
+#define BCM590XX_REG_GPLDO1	20
+#define BCM590XX_REG_GPLDO2	21
+#define BCM590XX_REG_GPLDO3	22
+#define BCM590XX_REG_GPLDO4	23
+#define BCM590XX_REG_GPLDO5	24
+#define BCM590XX_REG_GPLDO6	25
+#define BCM590XX_REG_VBUS	26
+
+#define BCM590XX_NUM_REGS	27
 
 #define BCM590XX_REG_IS_LDO(n)	(n < BCM590XX_REG_CSR)
+#define BCM590XX_REG_IS_GPLDO(n) \
+	((n > BCM590XX_REG_VSR) && (n < BCM590XX_REG_VBUS))
+#define BCM590XX_REG_IS_VBUS(n)	(n == BCM590XX_REG_VBUS)
 
 struct bcm590xx_board {
 	struct regulator_init_data *bcm590xx_pmu_init_data[BCM590XX_NUM_REGS];
@@ -149,6 +186,12 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 	BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges),
 	BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges),
 	BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges),
+	BCM590XX_REG_TABLE(gpldo1, ldo_a_table),
+	BCM590XX_REG_TABLE(gpldo2, ldo_a_table),
+	BCM590XX_REG_TABLE(gpldo3, ldo_a_table),
+	BCM590XX_REG_TABLE(gpldo4, ldo_a_table),
+	BCM590XX_REG_TABLE(gpldo5, ldo_a_table),
+	BCM590XX_REG_TABLE(gpldo6, ldo_a_table),
 };
 
 struct bcm590xx_reg {
@@ -161,6 +204,8 @@ static int bcm590xx_get_vsel_register(int id)
 {
 	if (BCM590XX_REG_IS_LDO(id))
 		return BCM590XX_RFLDOCTRL + id;
+	else if (BCM590XX_REG_IS_GPLDO(id))
+		return BCM590XX_GPLDO1CTRL + id;
 	else
 		return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3;
 }
@@ -171,6 +216,8 @@ static int bcm590xx_get_enable_register(int id)
 
 	if (BCM590XX_REG_IS_LDO(id))
 		reg = BCM590XX_RFLDOPMCTRL1 + id * 2;
+	else if (BCM590XX_REG_IS_GPLDO(id))
+		reg = BCM590XX_GPLDO1PMCTRL1 + id * 2;
 	else
 		switch (id) {
 		case BCM590XX_REG_CSR:
@@ -191,8 +238,11 @@ static int bcm590xx_get_enable_register(int id)
 		case BCM590XX_REG_SDSR2:
 			reg = BCM590XX_SDSR2PMCTRL1;
 			break;
+		case BCM590XX_REG_VBUS:
+			reg = BCM590XX_OTG_CTRL;
 		};
 
+
 	return reg;
 }
 
@@ -216,6 +266,12 @@ static struct regulator_ops bcm590xx_ops_dcdc = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
+static struct regulator_ops bcm590xx_ops_vbus = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+};
+
 #define BCM590XX_MATCH(_name, _id) \
 	{ \
 		.name = #_name, \
@@ -243,6 +299,13 @@ static struct of_regulator_match bcm590xx_matches[] = {
 	BCM590XX_MATCH(sdsr1, SDSR1),
 	BCM590XX_MATCH(sdsr2, SDSR2),
 	BCM590XX_MATCH(vsr, VSR),
+	BCM590XX_MATCH(gpldo1, GPLDO1),
+	BCM590XX_MATCH(gpldo2, GPLDO2),
+	BCM590XX_MATCH(gpldo3, GPLDO3),
+	BCM590XX_MATCH(gpldo4, GPLDO4),
+	BCM590XX_MATCH(gpldo5, GPLDO5),
+	BCM590XX_MATCH(gpldo6, GPLDO6),
+	BCM590XX_MATCH(vbus, VBUS),
 };
 
 static struct bcm590xx_board *bcm590xx_parse_dt_reg_data(
@@ -353,17 +416,23 @@ static int bcm590xx_probe(struct platform_device *pdev)
 		pmu->desc[i].linear_ranges = info->linear_ranges;
 		pmu->desc[i].n_linear_ranges = info->n_linear_ranges;
 
-		if (BCM590XX_REG_IS_LDO(i)) {
+		if ((BCM590XX_REG_IS_LDO(i)) || (BCM590XX_REG_IS_GPLDO(i))) {
 			pmu->desc[i].ops = &bcm590xx_ops_ldo;
 			pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK;
-		} else {
+		} else if (BCM590XX_REG_IS_VBUS(i))
+			pmu->desc[i].ops = &bcm590xx_ops_vbus;
+		else {
 			pmu->desc[i].ops = &bcm590xx_ops_dcdc;
 			pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK;
 		}
 
-		pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i);
-		pmu->desc[i].enable_is_inverted = true;
-		pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE;
+		if (BCM590XX_REG_IS_VBUS(i))
+			pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE;
+		else {
+			pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i);
+			pmu->desc[i].enable_is_inverted = true;
+			pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE;
+		}
 		pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i);
 		pmu->desc[i].type = REGULATOR_VOLTAGE;
 		pmu->desc[i].owner = THIS_MODULE;
@@ -371,7 +440,10 @@ static int bcm590xx_probe(struct platform_device *pdev)
 		config.dev = bcm590xx->dev;
 		config.init_data = reg_data;
 		config.driver_data = pmu;
-		config.regmap = bcm590xx->regmap;
+		if (BCM590XX_REG_IS_GPLDO(i) || BCM590XX_REG_IS_VBUS(i))
+			config.regmap = bcm590xx->regmap_sec;
+		else
+			config.regmap = bcm590xx->regmap_pri;
 
 		if (bcm590xx_reg_matches)
 			config.of_node = bcm590xx_reg_matches[i].of_node;

include/linux/mfd/arizona/core.h

@@ -124,4 +124,7 @@ int wm5102_patch(struct arizona *arizona);
 int wm5110_patch(struct arizona *arizona);
 int wm8997_patch(struct arizona *arizona);
 
+extern int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
+				     bool mandatory);
+
 #endif

include/linux/mfd/bcm590xx.h

@@ -19,12 +19,15 @@
 #include <linux/regmap.h>
 
 /* max register address */
-#define BCM590XX_MAX_REGISTER	0xe7
+#define BCM590XX_MAX_REGISTER_PRI	0xe7
+#define BCM590XX_MAX_REGISTER_SEC	0xf0
 
 struct bcm590xx {
 	struct device *dev;
-	struct i2c_client *i2c_client;
-	struct regmap *regmap;
+	struct i2c_client *i2c_pri;
+	struct i2c_client *i2c_sec;
+	struct regmap *regmap_pri;
+	struct regmap *regmap_sec;
 	unsigned int id;
 };
 

include/linux/mfd/tps65090.h

@@ -64,6 +64,20 @@ enum {
 	TPS65090_REGULATOR_MAX,
 };
 
+/* Register addresses */
+#define TPS65090_REG_INTR_STS	0x00
+#define TPS65090_REG_INTR_STS2	0x01
+#define TPS65090_REG_INTR_MASK	0x02
+#define TPS65090_REG_INTR_MASK2	0x03
+#define TPS65090_REG_CG_CTRL0	0x04
+#define TPS65090_REG_CG_CTRL1	0x05
+#define TPS65090_REG_CG_CTRL2	0x06
+#define TPS65090_REG_CG_CTRL3	0x07
+#define TPS65090_REG_CG_CTRL4	0x08
+#define TPS65090_REG_CG_CTRL5	0x09
+#define TPS65090_REG_CG_STATUS1	0x0a
+#define TPS65090_REG_CG_STATUS2	0x0b
+
 struct tps65090 {
 	struct device		*dev;
 	struct regmap		*rmap;