Merge tag 'at91-drivers' of git://github.com/at91linux/linux-at91 into next/drivers

From Nicolas Ferre:

AT91 crypto drivers DT support:
- add DT to sha/des/aes existing drivers
- add DMA DT
- all documentation added to crypto/atmel-crypto.txt file

* tag 'at91-drivers' of git://github.com/at91linux/linux-at91:
  crypto: atmel-sha - add sha information to the log
  crypto: atmel-sha - add support for Device Tree
  crypto: atmel-tdes - add support for Device Tree
  crypto: atmel-aes - add support for Device Tree

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/crypto/atmel-crypto.txt

@@ -0,0 +1,68 @@
+* Atmel HW cryptographic accelerators
+
+These are the HW cryptographic accelerators found on some Atmel products.
+
+* Advanced Encryption Standard (AES)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-aes".
+- reg: Should contain AES registers location and length.
+- interrupts: Should contain the IRQ line for the AES.
+- dmas: List of two DMA specifiers as described in
+        atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+             in the dmas property.
+
+Example:
+aes@f8038000 {
+	compatible = "atmel,at91sam9g46-aes";
+	reg = <0xf8038000 0x100>;
+	interrupts = <43 4 0>;
+	dmas = <&dma1 2 18>,
+	       <&dma1 2 19>;
+	dma-names = "tx", "rx";
+
+* Triple Data Encryption Standard (Triple DES)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-tdes".
+- reg: Should contain TDES registers location and length.
+- interrupts: Should contain the IRQ line for the TDES.
+
+Optional properties:
+- dmas: List of two DMA specifiers as described in
+        atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+             in the dmas property.
+
+Example:
+tdes@f803c000 {
+	compatible = "atmel,at91sam9g46-tdes";
+	reg = <0xf803c000 0x100>;
+	interrupts = <44 4 0>;
+	dmas = <&dma1 2 20>,
+	       <&dma1 2 21>;
+	dma-names = "tx", "rx";
+};
+
+* Secure Hash Algorithm (SHA)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-sha".
+- reg: Should contain SHA registers location and length.
+- interrupts: Should contain the IRQ line for the SHA.
+
+Optional properties:
+- dmas: One DMA specifiers as described in
+        atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+             in the dmas property. Only one "tx" string needed.
+
+Example:
+sha@f8034000 {
+	compatible = "atmel,at91sam9g46-sha";
+	reg = <0xf8034000 0x100>;
+	interrupts = <42 4 0>;
+	dmas = <&dma1 2 17>;
+	dma-names = "tx";
+};

drivers/crypto/atmel-aes.c

@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_device.h>
 #include <linux/delay.h>
 #include <linux/crypto.h>
 #include <linux/cryptohash.h>
@@ -39,6 +40,7 @@
 #include <crypto/hash.h>
 #include <crypto/internal/hash.h>
 #include <linux/platform_data/crypto-atmel.h>
+#include <dt-bindings/dma/at91.h>
 #include "atmel-aes-regs.h"
 
 #define CFB8_BLOCK_SIZE		1
@@ -747,59 +749,50 @@ static int atmel_aes_dma_init(struct atmel_aes_dev *dd,
 	struct crypto_platform_data *pdata)
 {
 	int err = -ENOMEM;
-	dma_cap_mask_t mask_in, mask_out;
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* Try to grab 2 DMA channels */
+	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask,
+			atmel_aes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
+	if (!dd->dma_lch_in.chan)
+		goto err_dma_in;
+
+	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
+	dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
+		AES_IDATAR(0);
+	dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size;
+	dd->dma_lch_in.dma_conf.src_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size;
+	dd->dma_lch_in.dma_conf.dst_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.device_fc = false;
+
+	dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask,
+			atmel_aes_filter, &pdata->dma_slave->txdata, dd->dev, "rx");
+	if (!dd->dma_lch_out.chan)
+		goto err_dma_out;
+
+	dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
+	dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
+		AES_ODATAR(0);
+	dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size;
+	dd->dma_lch_out.dma_conf.src_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size;
+	dd->dma_lch_out.dma_conf.dst_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_out.dma_conf.device_fc = false;
 
-	if (pdata && pdata->dma_slave->txdata.dma_dev &&
-		pdata->dma_slave->rxdata.dma_dev) {
-
-		/* Try to grab 2 DMA channels */
-		dma_cap_zero(mask_in);
-		dma_cap_set(DMA_SLAVE, mask_in);
-
-		dd->dma_lch_in.chan = dma_request_channel(mask_in,
-				atmel_aes_filter, &pdata->dma_slave->rxdata);
-
-		if (!dd->dma_lch_in.chan)
-			goto err_dma_in;
-
-		dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
-		dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
-			AES_IDATAR(0);
-		dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size;
-		dd->dma_lch_in.dma_conf.src_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size;
-		dd->dma_lch_in.dma_conf.dst_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.device_fc = false;
-
-		dma_cap_zero(mask_out);
-		dma_cap_set(DMA_SLAVE, mask_out);
-		dd->dma_lch_out.chan = dma_request_channel(mask_out,
-				atmel_aes_filter, &pdata->dma_slave->txdata);
-
-		if (!dd->dma_lch_out.chan)
-			goto err_dma_out;
-
-		dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
-		dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
-			AES_ODATAR(0);
-		dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size;
-		dd->dma_lch_out.dma_conf.src_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size;
-		dd->dma_lch_out.dma_conf.dst_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_out.dma_conf.device_fc = false;
-
-		return 0;
-	} else {
-		return -ENODEV;
-	}
+	return 0;
 
 err_dma_out:
 	dma_release_channel(dd->dma_lch_in.chan);
 err_dma_in:
+	dev_warn(dd->dev, "no DMA channel available\n");
 	return err;
 }
 
@@ -1261,6 +1254,47 @@ static void atmel_aes_get_cap(struct atmel_aes_dev *dd)
 	}
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_aes_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g46-aes" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_aes_dt_ids);
+
+static struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct crypto_platform_data *pdata;
+
+	if (!np) {
+		dev_err(&pdev->dev, "device node not found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pdata->dma_slave = devm_kzalloc(&pdev->dev,
+					sizeof(*(pdata->dma_slave)),
+					GFP_KERNEL);
+	if (!pdata->dma_slave) {
+		dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
+		devm_kfree(&pdev->dev, pdata);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return pdata;
+}
+#else
+static inline struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
 static int atmel_aes_probe(struct platform_device *pdev)
 {
 	struct atmel_aes_dev *aes_dd;
@@ -1272,6 +1306,14 @@ static int atmel_aes_probe(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata) {
+		pdata = atmel_aes_of_init(pdev);
+		if (IS_ERR(pdata)) {
+			err = PTR_ERR(pdata);
+			goto aes_dd_err;
+		}
+	}
+
+	if (!pdata->dma_slave) {
 		err = -ENXIO;
 		goto aes_dd_err;
 	}
@@ -1358,7 +1400,9 @@ static int atmel_aes_probe(struct platform_device *pdev)
 	if (err)
 		goto err_algs;
 
-	dev_info(dev, "Atmel AES\n");
+	dev_info(dev, "Atmel AES - Using %s, %s for DMA transfers\n",
+			dma_chan_name(aes_dd->dma_lch_in.chan),
+			dma_chan_name(aes_dd->dma_lch_out.chan));
 
 	return 0;
 
@@ -1424,6 +1468,7 @@ static struct platform_driver atmel_aes_driver = {
 	.driver		= {
 		.name	= "atmel_aes",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(atmel_aes_dt_ids),
 	},
 };
 

drivers/crypto/atmel-sha.c

@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_device.h>
 #include <linux/delay.h>
 #include <linux/crypto.h>
 #include <linux/cryptohash.h>
@@ -1263,32 +1264,29 @@ static int atmel_sha_dma_init(struct atmel_sha_dev *dd,
 	int err = -ENOMEM;
 	dma_cap_mask_t mask_in;
 
-	if (pdata && pdata->dma_slave->rxdata.dma_dev) {
-		/* Try to grab DMA channel */
-		dma_cap_zero(mask_in);
-		dma_cap_set(DMA_SLAVE, mask_in);
+	/* Try to grab DMA channel */
+	dma_cap_zero(mask_in);
+	dma_cap_set(DMA_SLAVE, mask_in);
 
-		dd->dma_lch_in.chan = dma_request_channel(mask_in,
-				atmel_sha_filter, &pdata->dma_slave->rxdata);
-
-		if (!dd->dma_lch_in.chan)
-			return err;
-
-		dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
-		dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
-			SHA_REG_DIN(0);
-		dd->dma_lch_in.dma_conf.src_maxburst = 1;
-		dd->dma_lch_in.dma_conf.src_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.dst_maxburst = 1;
-		dd->dma_lch_in.dma_conf.dst_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.device_fc = false;
-
-		return 0;
+	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in,
+			atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
+	if (!dd->dma_lch_in.chan) {
+		dev_warn(dd->dev, "no DMA channel available\n");
+		return err;
 	}
 
-	return -ENODEV;
+	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
+	dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
+		SHA_REG_DIN(0);
+	dd->dma_lch_in.dma_conf.src_maxburst = 1;
+	dd->dma_lch_in.dma_conf.src_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.dst_maxburst = 1;
+	dd->dma_lch_in.dma_conf.dst_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.device_fc = false;
+
+	return 0;
 }
 
 static void atmel_sha_dma_cleanup(struct atmel_sha_dev *dd)
@@ -1326,6 +1324,48 @@ static void atmel_sha_get_cap(struct atmel_sha_dev *dd)
 	}
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_sha_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g46-sha" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_sha_dt_ids);
+
+static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct crypto_platform_data *pdata;
+
+	if (!np) {
+		dev_err(&pdev->dev, "device node not found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pdata->dma_slave = devm_kzalloc(&pdev->dev,
+					sizeof(*(pdata->dma_slave)),
+					GFP_KERNEL);
+	if (!pdata->dma_slave) {
+		dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
+		devm_kfree(&pdev->dev, pdata);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct crypto_platform_data *atmel_sha_of_init(struct platform_device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
 static int atmel_sha_probe(struct platform_device *pdev)
 {
 	struct atmel_sha_dev *sha_dd;
@@ -1402,13 +1442,23 @@ static int atmel_sha_probe(struct platform_device *pdev)
 	if (sha_dd->caps.has_dma) {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
-			dev_err(&pdev->dev, "platform data not available\n");
+			pdata = atmel_sha_of_init(pdev);
+			if (IS_ERR(pdata)) {
+				dev_err(&pdev->dev, "platform data not available\n");
+				err = PTR_ERR(pdata);
+				goto err_pdata;
+			}
+		}
+		if (!pdata->dma_slave) {
 			err = -ENXIO;
 			goto err_pdata;
 		}
 		err = atmel_sha_dma_init(sha_dd, pdata);
 		if (err)
 			goto err_sha_dma;
+
+		dev_info(dev, "using %s for DMA transfers\n",
+				dma_chan_name(sha_dd->dma_lch_in.chan));
 	}
 
 	spin_lock(&atmel_sha.lock);
@@ -1419,7 +1469,9 @@ static int atmel_sha_probe(struct platform_device *pdev)
 	if (err)
 		goto err_algs;
 
-	dev_info(dev, "Atmel SHA1/SHA256\n");
+	dev_info(dev, "Atmel SHA1/SHA256%s%s\n",
+			sha_dd->caps.has_sha224 ? "/SHA224" : "",
+			sha_dd->caps.has_sha_384_512 ? "/SHA384/SHA512" : "");
 
 	return 0;
 
@@ -1483,6 +1535,7 @@ static struct platform_driver atmel_sha_driver = {
 	.driver		= {
 		.name	= "atmel_sha",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(atmel_sha_dt_ids),
 	},
 };
 

drivers/crypto/atmel-tdes.c

@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_device.h>
 #include <linux/delay.h>
 #include <linux/crypto.h>
 #include <linux/cryptohash.h>
@@ -716,59 +717,50 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 			struct crypto_platform_data *pdata)
 {
 	int err = -ENOMEM;
-	dma_cap_mask_t mask_in, mask_out;
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* Try to grab 2 DMA channels */
+	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask,
+			atmel_tdes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
+	if (!dd->dma_lch_in.chan)
+		goto err_dma_in;
+
+	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
+	dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
+		TDES_IDATA1R;
+	dd->dma_lch_in.dma_conf.src_maxburst = 1;
+	dd->dma_lch_in.dma_conf.src_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.dst_maxburst = 1;
+	dd->dma_lch_in.dma_conf.dst_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.device_fc = false;
+
+	dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask,
+			atmel_tdes_filter, &pdata->dma_slave->txdata, dd->dev, "rx");
+	if (!dd->dma_lch_out.chan)
+		goto err_dma_out;
+
+	dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
+	dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
+		TDES_ODATA1R;
+	dd->dma_lch_out.dma_conf.src_maxburst = 1;
+	dd->dma_lch_out.dma_conf.src_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_out.dma_conf.dst_maxburst = 1;
+	dd->dma_lch_out.dma_conf.dst_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_out.dma_conf.device_fc = false;
 
-	if (pdata && pdata->dma_slave->txdata.dma_dev &&
-		pdata->dma_slave->rxdata.dma_dev) {
-
-		/* Try to grab 2 DMA channels */
-		dma_cap_zero(mask_in);
-		dma_cap_set(DMA_SLAVE, mask_in);
-
-		dd->dma_lch_in.chan = dma_request_channel(mask_in,
-				atmel_tdes_filter, &pdata->dma_slave->rxdata);
-
-		if (!dd->dma_lch_in.chan)
-			goto err_dma_in;
-
-		dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
-		dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
-			TDES_IDATA1R;
-		dd->dma_lch_in.dma_conf.src_maxburst = 1;
-		dd->dma_lch_in.dma_conf.src_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.dst_maxburst = 1;
-		dd->dma_lch_in.dma_conf.dst_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.device_fc = false;
-
-		dma_cap_zero(mask_out);
-		dma_cap_set(DMA_SLAVE, mask_out);
-		dd->dma_lch_out.chan = dma_request_channel(mask_out,
-				atmel_tdes_filter, &pdata->dma_slave->txdata);
-
-		if (!dd->dma_lch_out.chan)
-			goto err_dma_out;
-
-		dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
-		dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
-			TDES_ODATA1R;
-		dd->dma_lch_out.dma_conf.src_maxburst = 1;
-		dd->dma_lch_out.dma_conf.src_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_out.dma_conf.dst_maxburst = 1;
-		dd->dma_lch_out.dma_conf.dst_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_out.dma_conf.device_fc = false;
-
-		return 0;
-	} else {
-		return -ENODEV;
-	}
+	return 0;
 
 err_dma_out:
 	dma_release_channel(dd->dma_lch_in.chan);
 err_dma_in:
+	dev_warn(dd->dev, "no DMA channel available\n");
 	return err;
 }
 
@@ -1317,6 +1309,47 @@ static void atmel_tdes_get_cap(struct atmel_tdes_dev *dd)
 	}
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_tdes_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g46-tdes" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_tdes_dt_ids);
+
+static struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct crypto_platform_data *pdata;
+
+	if (!np) {
+		dev_err(&pdev->dev, "device node not found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pdata->dma_slave = devm_kzalloc(&pdev->dev,
+					sizeof(*(pdata->dma_slave)),
+					GFP_KERNEL);
+	if (!pdata->dma_slave) {
+		dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
+		devm_kfree(&pdev->dev, pdata);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *pdev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
 static int atmel_tdes_probe(struct platform_device *pdev)
 {
 	struct atmel_tdes_dev *tdes_dd;
@@ -1399,13 +1432,24 @@ static int atmel_tdes_probe(struct platform_device *pdev)
 	if (tdes_dd->caps.has_dma) {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
-			dev_err(&pdev->dev, "platform data not available\n");
+			pdata = atmel_tdes_of_init(pdev);
+			if (IS_ERR(pdata)) {
+				dev_err(&pdev->dev, "platform data not available\n");
+				err = PTR_ERR(pdata);
+				goto err_pdata;
+			}
+		}
+		if (!pdata->dma_slave) {
 			err = -ENXIO;
 			goto err_pdata;
 		}
 		err = atmel_tdes_dma_init(tdes_dd, pdata);
 		if (err)
 			goto err_tdes_dma;
+
+		dev_info(dev, "using %s, %s for DMA transfers\n",
+				dma_chan_name(tdes_dd->dma_lch_in.chan),
+				dma_chan_name(tdes_dd->dma_lch_out.chan));
 	}
 
 	spin_lock(&atmel_tdes.lock);
@@ -1487,6 +1531,7 @@ static struct platform_driver atmel_tdes_driver = {
 	.driver		= {
 		.name	= "atmel_tdes",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(atmel_tdes_dt_ids),
 	},
 };