Merge tag 'renesas-dt-du-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Pull "Renesas ARM Based SoC DT DU Updates for v3.19" from Simon Horman:

* Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791

* tag 'renesas-dt-du-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: koelsch: Enable DU device in DT
  ARM: shmobile: koelsch-reference: Remove DU platform device
  ARM: shmobile: lager: Enable DU device in DT
  ARM: shmobile: lager-reference: Remove DU platform device
  ARM: shmobile: marzen: Enable DU device in DT
  ARM: shmobile: dts: Add common file for AA104XD12 panel
  ARM: shmobile: r8a7791: Add DU node to device tree
  ARM: shmobile: r8a7790: Add DU node to device tree
  ARM: shmobile: r8a7779: Add DU node to device tree

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/r8a7779-marzen.dts

@@ -68,6 +68,78 @@
 			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				vga_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				vga_enc_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&vga_enc_out>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_connector: endpoint {
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&vga_enc_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lvds_enc_in>;
+			};
+		};
+	};
 };
 
 &irqpin0 {
@@ -83,6 +155,17 @@
 };
 
 &pfc {
+	du_pins: du {
+		du0 {
+			renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+			renesas,function = "du0";
+		};
+		du1 {
+			renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+			renesas,function = "du1";
+		};
+	};
+
 	lan0_pins: lan0 {
 		intc {
 			renesas,groups = "intc_irq1_b";

arch/arm/boot/dts/r8a7779.dtsi

@@ -379,6 +379,30 @@
 		status = "disabled";
 	};
 
+	du: display@fff80000 {
+		compatible = "renesas,du-r8a7779";
+		reg = <0 0xfff80000 0 0x40000>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb0: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_rgb1: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/r8a7790-lager.dts

@@ -144,6 +144,56 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+		port@2 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
 };
 
 &extal_clk {
@@ -151,9 +201,6 @@
 };
 
 &pfc {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
 	du_pins: du {
 		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 		renesas,function = "du";

arch/arm/boot/dts/r8a7790.dtsi

@@ -600,6 +600,96 @@
 		status = "disabled";
 	};
 
+	vsp1@fe920000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe920000 0 0x8000>;
+		interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe938000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe938000 0 0x8000>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+			 <&mstp7_clks R8A7790_CLK_DU1>,
+			 <&mstp7_clks R8A7790_CLK_DU2>,
+			 <&mstp7_clks R8A7790_CLK_LVDS0>,
+			 <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+			port@2 {
+				reg = <2>;
+				du_out_lvds1: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -211,14 +211,24 @@
 	};
 };
 
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
 &pfc {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
 	i2c2_pins: i2c2 {
 		renesas,groups = "i2c2";
 		renesas,function = "i2c2";

arch/arm/boot/dts/r8a7791.dtsi

@@ -637,6 +637,75 @@
 		status = "disabled";
 	};
 
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe938000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe938000 0 0x8000>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7791";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+			 <&mstp7_clks R8A7791_CLK_DU1>,
+			 <&mstp7_clks R8A7791_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi

@@ -0,0 +1,41 @@
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa104xd12", "panel-dpi";
+
+		width-mm = <210>;
+		height-mm = <158>;
+
+		panel-timing {
+			/* 1024x768 @65Hz */
+			clock-frequency = <65000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hsync-len = <136>;
+			hfront-porch = <20>;
+			hback-porch = <160>;
+			vfront-porch = <3>;
+			vback-porch = <29>;
+			vsync-len = <6>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};

arch/arm/mach-shmobile/board-koelsch-reference.c

@@ -15,87 +15,15 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/rcar-du.h>
 
 #include <asm/mach/arch.h>
 
-#include "clock.h"
 #include "common.h"
-#include "irqs.h"
 #include "r8a7791.h"
 #include "rcar-gen2.h"
 
-/* DU */
-static struct rcar_du_encoder_data koelsch_du_encoders[] = {
-	{
-		.type = RCAR_DU_ENCODER_NONE,
-		.output = RCAR_DU_OUTPUT_LVDS0,
-		.connector.lvds.panel = {
-			.width_mm = 210,
-			.height_mm = 158,
-			.mode = {
-				.pixelclock = 65000000,
-				.hactive = 1024,
-				.hfront_porch = 20,
-				.hback_porch = 160,
-				.hsync_len = 136,
-				.vactive = 768,
-				.vfront_porch = 3,
-				.vback_porch = 29,
-				.vsync_len = 6,
-			},
-		},
-	},
-};
-
-static struct rcar_du_platform_data koelsch_du_pdata = {
-	.encoders = koelsch_du_encoders,
-	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
-	DEFINE_RES_MEM(0xfeb00000, 0x40000),
-	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
-	DEFINE_RES_IRQ(gic_spi(256)),
-	DEFINE_RES_IRQ(gic_spi(268)),
-};
-
-static void __init koelsch_add_du_device(void)
-{
-	struct platform_device_info info = {
-		.name = "rcar-du-r8a7791",
-		.id = -1,
-		.res = du_resources,
-		.num_res = ARRAY_SIZE(du_resources),
-		.data = &koelsch_du_pdata,
-		.size_data = sizeof(koelsch_du_pdata),
-		.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	platform_device_register_full(&info);
-}
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
-	{ "du0", "du.0", "rcar-du-r8a7791" },
-	{ "du1", "du.1", "rcar-du-r8a7791" },
-	{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
-};
-
-static void __init koelsch_add_standard_devices(void)
-{
-	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	koelsch_add_du_device();
-}
-
 static const char * const koelsch_boards_compat_dt[] __initconst = {
 	"renesas,koelsch",
 	"renesas,koelsch-reference",
@@ -106,7 +34,6 @@ DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
-	.init_machine	= koelsch_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.reserve	= rcar_gen2_reserve,
 	.dt_compat	= koelsch_boards_compat_dt,

arch/arm/mach-shmobile/board-lager-reference.c

@@ -14,94 +14,15 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/rcar-du.h>
 
 #include <asm/mach/arch.h>
 
-#include "clock.h"
 #include "common.h"
-#include "irqs.h"
 #include "r8a7790.h"
 #include "rcar-gen2.h"
 
-/* DU */
-static struct rcar_du_encoder_data lager_du_encoders[] = {
-	{
-		.type = RCAR_DU_ENCODER_VGA,
-		.output = RCAR_DU_OUTPUT_DPAD0,
-	}, {
-		.type = RCAR_DU_ENCODER_NONE,
-		.output = RCAR_DU_OUTPUT_LVDS1,
-		.connector.lvds.panel = {
-			.width_mm = 210,
-			.height_mm = 158,
-			.mode = {
-				.pixelclock = 65000000,
-				.hactive = 1024,
-				.hfront_porch = 20,
-				.hback_porch = 160,
-				.hsync_len = 136,
-				.vactive = 768,
-				.vfront_porch = 3,
-				.vback_porch = 29,
-				.vsync_len = 6,
-			},
-		},
-	},
-};
-
-static struct rcar_du_platform_data lager_du_pdata = {
-	.encoders = lager_du_encoders,
-	.num_encoders = ARRAY_SIZE(lager_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
-	DEFINE_RES_MEM(0xfeb00000, 0x70000),
-	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
-	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
-	DEFINE_RES_IRQ(gic_spi(256)),
-	DEFINE_RES_IRQ(gic_spi(268)),
-	DEFINE_RES_IRQ(gic_spi(269)),
-};
-
-static void __init lager_add_du_device(void)
-{
-	struct platform_device_info info = {
-		.name = "rcar-du-r8a7790",
-		.id = -1,
-		.res = du_resources,
-		.num_res = ARRAY_SIZE(du_resources),
-		.data = &lager_du_pdata,
-		.size_data = sizeof(lager_du_pdata),
-		.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	platform_device_register_full(&info);
-}
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
-	{ "du0", "du.0", "rcar-du-r8a7790" },
-	{ "du1", "du.1", "rcar-du-r8a7790" },
-	{ "du2", "du.2", "rcar-du-r8a7790" },
-	{ "lvds0", "lvds.0", "rcar-du-r8a7790" },
-	{ "lvds1", "lvds.1", "rcar-du-r8a7790" },
-};
-
-static void __init lager_add_standard_devices(void)
-{
-	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	lager_add_du_device();
-}
-
 static const char *lager_boards_compat_dt[] __initdata = {
 	"renesas,lager",
 	"renesas,lager-reference",
@@ -112,7 +33,6 @@ DT_MACHINE_START(LAGER_DT, "lager")
 	.smp		= smp_ops(r8a7790_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
-	.init_machine	= lager_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.reserve	= rcar_gen2_reserve,
 	.dt_compat	= lager_boards_compat_dt,