mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle

The mailbox framework controls the transmission queue and requires
either its controller implementations or clients to run the state
machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready
interrupt as the equivalent of a Tx-done interrupt to run this Tx
queue state-machine.

The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload
certain PM tasks, like doing the necessary operations for Device
PM suspend/resume or for entering lower c-states during cpuidle.

The CPUIdle on AM33xx requires the messages to be sent without
having to trigger the Tx-ready interrupts, as the interrupt
would immediately terminate the CPUIdle operation. Support for
this has been added by introducing a DT quirk, "ti,mbox-send-noirq"
and using it to modify the normal OMAP mailbox controller behavior
on the sub-mailboxes used to communicate with the WkupM3 remote
processor. This also requires the wkup_m3_ipc driver to adjust
its mailbox usage logic to run the Tx state machine.

NOTE:
- AM43xx does not communicate with WkupM3 for CPU Idle, so is
  not affected by this behavior. But, it uses the same IPC driver
  for PM suspend/resume functionality, so requires the quirk as
  well, because of changes to the common wkup_m3_ipc driver.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[s-anna@ti.com: revise logic and update comments/patch description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Documentation/devicetree/bindings/mailbox/omap-mailbox.txt

@@ -75,6 +75,14 @@ data that represent the following:
     Cell #3 (usr_id)  - mailbox user id for identifying the interrupt line
                         associated with generating a tx/rx fifo interrupt.
 
+Optional Properties:
+--------------------
+- ti,mbox-send-noirq:   Quirk flag to allow the client user of this sub-mailbox
+                        to send messages without triggering a Tx ready interrupt,
+                        and to control the Tx ticker. Should be used only on
+                        sub-mailboxes used to communicate with WkupM3 remote
+                        processor on AM33xx/AM43xx SoCs.
+
 Mailbox Users:
 ==============
 A device needing to communicate with a target processor device should specify

drivers/mailbox/omap-mailbox.c

@@ -38,6 +38,8 @@
 #include <linux/mailbox_controller.h>
 #include <linux/mailbox_client.h>
 
+#include "mailbox.h"
+
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))
 #define MAILBOX_FIFOSTATUS(m)		(0x080 + 4 * (m))
@@ -106,6 +108,7 @@ struct omap_mbox_fifo_info {
 	int rx_irq;
 
 	const char *name;
+	bool send_no_irq;
 };
 
 struct omap_mbox {
@@ -119,6 +122,7 @@ struct omap_mbox {
 	u32			ctx[OMAP4_MBOX_NR_REGS];
 	u32			intr_type;
 	struct mbox_chan	*chan;
+	bool			send_no_irq;
 };
 
 /* global variables for the mailbox devices */
@@ -418,6 +422,9 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 		goto fail_request_irq;
 	}
 
+	if (mbox->send_no_irq)
+		mbox->chan->txdone_method = TXDONE_BY_ACK;
+
 	_omap_mbox_enable_irq(mbox, IRQ_RX);
 
 	return 0;
@@ -586,13 +593,27 @@ static void omap_mbox_chan_shutdown(struct mbox_chan *chan)
 	mutex_unlock(&mdev->cfg_lock);
 }
 
-static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
+static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, void *data)
 {
-	struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
 	int ret = -EBUSY;
 
-	if (!mbox)
-		return -EINVAL;
+	if (!mbox_fifo_full(mbox)) {
+		_omap_mbox_enable_irq(mbox, IRQ_RX);
+		mbox_fifo_write(mbox, (mbox_msg_t)data);
+		ret = 0;
+		_omap_mbox_disable_irq(mbox, IRQ_RX);
+
+		/* we must read and ack the interrupt directly from here */
+		mbox_fifo_read(mbox);
+		ack_mbox_irq(mbox, IRQ_RX);
+	}
+
+	return ret;
+}
+
+static int omap_mbox_chan_send(struct omap_mbox *mbox, void *data)
+{
+	int ret = -EBUSY;
 
 	if (!mbox_fifo_full(mbox)) {
 		mbox_fifo_write(mbox, (mbox_msg_t)data);
@@ -604,6 +625,22 @@ static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
 	return ret;
 }
 
+static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
+{
+	struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
+	int ret;
+
+	if (!mbox)
+		return -EINVAL;
+
+	if (mbox->send_no_irq)
+		ret = omap_mbox_chan_send_noirq(mbox, data);
+	else
+		ret = omap_mbox_chan_send(mbox, data);
+
+	return ret;
+}
+
 static const struct mbox_chan_ops omap_mbox_chan_ops = {
 	.startup        = omap_mbox_chan_startup,
 	.send_data      = omap_mbox_chan_send_data,
@@ -732,6 +769,9 @@ static int omap_mbox_probe(struct platform_device *pdev)
 			finfo->rx_usr = tmp[2];
 
 			finfo->name = child->name;
+
+			if (of_find_property(child, "ti,mbox-send-noirq", NULL))
+				finfo->send_no_irq = true;
 		} else {
 			finfo->tx_id = info->tx_id;
 			finfo->rx_id = info->rx_id;
@@ -791,6 +831,7 @@ static int omap_mbox_probe(struct platform_device *pdev)
 		fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, finfo->rx_usr);
 		fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, finfo->rx_usr);
 
+		mbox->send_no_irq = finfo->send_no_irq;
 		mbox->intr_type = intr_type;
 
 		mbox->parent = mdev;