ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support

Imx6q sabrelite board uses ecspi1 to connect a spi flash sst25vf016b,
we need to add pinctrl information for it in the dts, otherwise the
ecspi1 driver can't work and the connected flash is wrongly
detected as a mr25h256 flash like this:

m25p80 spi32766.0: found mr25h256, expected sst25vf016b
m25p80 spi32766.0: mr25h256 (32 Kbytes)

Cc: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -27,6 +27,8 @@
 				ecspi@02008000 { /* eCSPI1 */
 					fsl,spi-num-chipselects = <1>;
 					cs-gpios = <&gpio3 19 0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					status = "okay";
 
 					flash: m25p80@0 {
@@ -50,6 +52,7 @@
 					pinctrl_gpio_hog: gpiohog {
 						fsl,pins = <
 							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+							   121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
 							   >;
 					};
 				};

arch/arm/boot/dts/imx6q.dtsi

@@ -581,6 +581,14 @@
 							    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
 					};
 				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <101 0x100b1		/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+							    109 0x100b1		/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+							    94  0x100b1>;	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+					};
+				};
 			};
 
 			dcic@020e4000 { /* DCIC1 */