Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

Documentation/ABI/testing/sysfs-class-net-mesh

@@ -22,6 +22,14 @@ Description:
                 mesh will be fragmented or silently discarded if the
                 packet size exceeds the outgoing interface MTU.
 
+What:		/sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date:		May 2011
+Contact:	Antonio Quartulli <ordex@autistici.org>
+Description:
+		Indicates whether the data traffic going from a
+		wireless client to another wireless client will be
+		silently dropped.
+
 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
 Date:           October 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>

Documentation/DocBook/80211.tmpl

@@ -433,8 +433,18 @@
           Insert notes about VLAN interfaces with hw crypto here or
           in the hw crypto chapter.
         </para>
+      <section id="ps-client">
+        <title>support for powersaving clients</title>
+!Pinclude/net/mac80211.h AP support for powersaving clients
+      </section>
 !Finclude/net/mac80211.h ieee80211_get_buffered_bc
 !Finclude/net/mac80211.h ieee80211_beacon_get
+!Finclude/net/mac80211.h ieee80211_sta_eosp_irqsafe
+!Finclude/net/mac80211.h ieee80211_frame_release_type
+!Finclude/net/mac80211.h ieee80211_sta_ps_transition
+!Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni
+!Finclude/net/mac80211.h ieee80211_sta_set_buffered
+!Finclude/net/mac80211.h ieee80211_sta_block_awake
       </chapter>
 
       <chapter id="multi-iface">
@@ -460,7 +470,6 @@
 !Finclude/net/mac80211.h sta_notify_cmd
 !Finclude/net/mac80211.h ieee80211_find_sta
 !Finclude/net/mac80211.h ieee80211_find_sta_by_ifaddr
-!Finclude/net/mac80211.h ieee80211_sta_block_awake
       </chapter>
 
       <chapter id="hardware-scan-offload">

Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

@@ -1,61 +1,24 @@
-CAN Device Tree Bindings
-------------------------
-2011 Freescale Semiconductor, Inc.
+Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
 
-fsl,flexcan-v1.0 nodes
------------------------
-In addition to the required compatible-, reg- and interrupt-properties, you can
-also specify which clock source shall be used for the controller.
+Required properties:
 
-CPI Clock- Can Protocol Interface Clock
-	This CLK_SRC bit of CTRL(control register) selects the clock source to
-	the CAN Protocol Interface(CPI) to be either the peripheral clock
-	(driven by the PLL) or the crystal oscillator clock. The selected clock
-	is the one fed to the prescaler to generate the Serial Clock (Sclock).
-	The PRESDIV field of CTRL(control register) controls a prescaler that
-	generates the Serial Clock (Sclock), whose period defines the
-	time quantum used to compose the CAN waveform.
+- compatible : Should be "fsl,<processor>-flexcan"
 
-Can Engine Clock Source
-	There are two sources for CAN clock
-	- Platform Clock  It represents the bus clock
-	- Oscillator Clock
+  An implementation should also claim any of the following compatibles
+  that it is fully backwards compatible with:
 
-	Peripheral Clock (PLL)
-	--------------
-		     |
-		    ---------		      -------------
-		    |       |CPI Clock	      | Prescaler |       Sclock
-		    |       |---------------->| (1.. 256) |------------>
-		    ---------		      -------------
-                     |  |
-	--------------  ---------------------CLK_SRC
-	Oscillator Clock
+  - fsl,p1010-flexcan
 
-- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
-			     the peripheral clock. PLL clock is fed to the
-			     prescaler to generate the Serial Clock (Sclock).
-			     Valid values are "oscillator" and "platform"
-			     "oscillator": CAN engine clock source is oscillator clock.
-			     "platform" The CAN engine clock source is the bus clock
-		             (platform clock).
+- reg : Offset and length of the register set for this device
+- interrupts : Interrupt tuple for this device
+- clock-frequency : The oscillator frequency driving the flexcan device
 
-- fsl,flexcan-clock-divider : for the reference and system clock, an additional
-			      clock divider can be specified.
-- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+Example:
 
-Note:
-	- v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
-	- P1010 does not have oscillator as the Clock Source.So the default
-	  Clock Source is platform clock.
-Examples:
-
-	can0@1c000 {
-		compatible = "fsl,flexcan-v1.0";
+	can@1c000 {
+		compatible = "fsl,p1010-flexcan";
 		reg = <0x1c000 0x1000>;
 		interrupts = <48 0x2>;
 		interrupt-parent = <&mpic>;
-		fsl,flexcan-clock-source = "platform";
-		fsl,flexcan-clock-divider = <2>;
-		clock-frequency = <fixed by u-boot>;
+		clock-frequency = <200000000>; // filled in by bootloader
 	};

Documentation/devicetree/bindings/net/smsc911x.txt

@@ -0,0 +1,38 @@
+* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+Required properties:
+- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
+- reg : Address and length of the io space for SMSC LAN
+- interrupts : Should contain SMSC LAN interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- phy-mode : String, operation mode of the PHY interface.
+  Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+  "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+
+Optional properties:
+- reg-shift : Specify the quantity to shift the register offsets by
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+  should be performed on the device.  Valid value for SMSC LAN is
+  2 or 4.  If it's omitted or invalid, the size would be 2.
+- smsc,irq-active-high : Indicates the IRQ polarity is active-high
+- smsc,irq-push-pull : Indicates the IRQ type is push-pull
+- smsc,force-internal-phy : Forces SMSC LAN controller to use
+  internal PHY
+- smsc,force-external-phy : Forces SMSC LAN controller to use
+  external PHY
+- smsc,save-mac-address : Indicates that mac address needs to be saved
+  before resetting the controller
+- local-mac-address : 6 bytes, mac address
+
+Examples:
+
+lan9220@f4000000 {
+	compatible = "smsc,lan9220", "smsc,lan9115";
+	reg = <0xf4000000 0x2000000>;
+	phy-mode = "mii";
+	interrupt-parent = <&gpio1>;
+	interrupts = <31>;
+	reg-io-width = <4>;
+	smsc,irq-push-pull;
+};

Documentation/feature-removal-schedule.txt

@@ -594,9 +594,18 @@ Why:    In 3.0, we can now autodetect internal 3G device and already have
 Who:    Lee, Chun-Yi <jlee@novell.com>
 
 ----------------------------
+
 What:	The XFS nodelaylog mount option
 When:	3.3
 Why:	The delaylog mode that has been the default since 2.6.39 has proven
 	stable, and the old code is in the way of additional improvements in
 	the log code.
 Who:	Christoph Hellwig <hch@lst.de>
+
+----------------------------
+
+What:	iwlagn alias support
+When:	3.5
+Why:	The iwlagn module has been renamed iwlwifi.  The alias will be around
+	for backward compatibility for several cycles and then dropped.
+Who:	Don Fry <donald.h.fry@intel.com>

Documentation/networking/batman-adv.txt

@@ -1,4 +1,4 @@
-[state: 17-04-2011]
+[state: 21-08-2011]
 
 BATMAN-ADV
 ----------
@@ -68,9 +68,9 @@ All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
 #  ls  /sys/class/net/bat0/mesh/
-#  aggregated_ogms  gw_bandwidth  hop_penalty
-#  bonding          gw_mode       orig_interval
-#  fragmentation    gw_sel_class  vis_mode
+# aggregated_ogms   fragmentation gw_sel_class   vis_mode
+# ap_isolation      gw_bandwidth  hop_penalty
+# bonding           gw_mode       orig_interval
 
 
 There is a special folder for debugging information:

Documentation/networking/ip-sysctl.txt

@@ -1045,6 +1045,11 @@ conf/interface/*:
 accept_ra - INTEGER
 	Accept Router Advertisements; autoconfigure using them.
 
+	It also determines whether or not to transmit Router
+	Solicitations. If and only if the functional setting is to
+	accept Router Advertisements, Router Solicitations will be
+	transmitted.
+
 	Possible values are:
 		0 Do not accept Router Advertisements.
 		1 Accept Router Advertisements if forwarding is disabled.
@@ -1115,14 +1120,14 @@ forwarding - INTEGER
 	Possible values are:
 		0 Forwarding disabled
 		1 Forwarding enabled
-		2 Forwarding enabled (Hybrid Mode)
 
 	FALSE (0):
 
 	By default, Host behaviour is assumed.  This means:
 
 	1. IsRouter flag is not set in Neighbour Advertisements.
-	2. Router Solicitations are being sent when necessary.
+	2. If accept_ra is TRUE (default), transmit Router
+	   Solicitations.
 	3. If accept_ra is TRUE (default), accept Router
 	   Advertisements (and do autoconfiguration).
 	4. If accept_redirects is TRUE (default), accept Redirects.
@@ -1133,16 +1138,10 @@ forwarding - INTEGER
 	This means exactly the reverse from the above:
 
 	1. IsRouter flag is set in Neighbour Advertisements.
-	2. Router Solicitations are not sent.
+	2. Router Solicitations are not sent unless accept_ra is 2.
 	3. Router Advertisements are ignored unless accept_ra is 2.
 	4. Redirects are ignored.
 
-	TRUE (2):
-
-	Hybrid mode. Same behaviour as TRUE, except for:
-
-	2. Router Solicitations are being sent when necessary.
-
 	Default: 0 (disabled) if global forwarding is disabled (default),
 		 otherwise 1 (enabled).
 

Documentation/networking/mac80211-injection.txt

@@ -23,6 +23,10 @@ radiotap headers and used to control injection:
    IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the
 			      current fragmentation threshold.
 
+ * IEEE80211_RADIOTAP_TX_FLAGS
+
+   IEEE80211_RADIOTAP_F_TX_NOACK: frame should be sent without waiting for
+				  an ACK even if it is a unicast frame
 
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.

Documentation/networking/netdevices.txt

@@ -73,7 +73,7 @@ dev->hard_start_xmit:
 	has to lock by itself when needed. It is recommended to use a try lock
 	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
-	set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
+	set_rx_mode. Note that the use of NETIF_F_LLTX is deprecated.
 	Don't use it for new drivers.
 
 	Context: Process with BHs disabled or BH (timer),
@@ -92,7 +92,7 @@ dev->tx_timeout:
 	Context: BHs disabled
 	Notes: netif_queue_stopped() is guaranteed true
 
-dev->set_multicast_list:
+dev->set_rx_mode:
 	Synchronization: netif_tx_lock spinlock.
 	Context: BHs disabled
 

Documentation/networking/stmmac.txt

@@ -76,7 +76,16 @@ core.
 
 4.5) DMA descriptors
 Driver handles both normal and enhanced descriptors. The latter has been only
-tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
+tested on DWC Ether MAC 10/100/1000 Universal version 3.41a and later.
+
+STMMAC supports DMA descriptor to operate both in dual buffer (RING)
+and linked-list(CHAINED) mode. In RING each descriptor points to two
+data buffer pointers whereas in CHAINED mode they point to only one data
+buffer pointer. RING mode is the default.
+
+In CHAINED mode each descriptor will have pointer to next descriptor in
+the list, hence creating the explicit chaining in the descriptor itself,
+whereas such explicit chaining is not possible in RING mode.
 
 4.6) Ethtool support
 Ethtool is supported. Driver statistics and internal errors can be taken using:
@@ -235,7 +244,38 @@ reset procedure etc).
  o enh_desc.c: functions for handling enhanced descriptors
  o norm_desc.c: functions for handling normal descriptors
 
-5) TODO:
+5) Debug Information
+
+The driver exports many information i.e. internal statistics,
+debug information, MAC and DMA registers etc.
+
+These can be read in several ways depending on the
+type of the information actually needed.
+
+For example a user can be use the ethtool support
+to get statistics: e.g. using: ethtool -S ethX
+(that shows the Management counters (MMC) if supported)
+or sees the MAC/DMA registers: e.g. using: ethtool -d ethX
+
+Compiling the Kernel with CONFIG_DEBUG_FS and enabling the
+STMMAC_DEBUG_FS option the driver will export the following
+debugfs entries:
+
+/sys/kernel/debug/stmmaceth/descriptors_status
+  To show the DMA TX/RX descriptor rings
+
+Developer can also use the "debug" module parameter to get
+further debug information.
+
+In the end, there are other macros (that cannot be enabled
+via menuconfig) to turn-on the RX/TX DMA debugging,
+specific MAC core debug printk etc. Others to enable the
+debug in the TX and RX processes.
+All these are only useful during the developing stage
+and should never enabled inside the code for general usage.
+In fact, these can generate an huge amount of debug messages.
+
+6) TODO:
  o XGMAC is not supported.
  o Review the timer optimisation code to use an embedded device that will be
   available in new chip generations.

MAINTAINERS

@@ -117,20 +117,20 @@ Maintainers List (try to look for most precise areas first)
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/3c505*
+F:	drivers/net/ethernet/i825xx/3c505*
 
 3C59X NETWORK DRIVER
 M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/vortex.txt
-F:	drivers/net/3c59x.c
+F:	drivers/net/ethernet/3com/3c59x.c
 
 3CR990 NETWORK DRIVER
 M:	David Dillow <dave@thedillows.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/typhoon*
+F:	drivers/net/ethernet/3com/typhoon*
 
 3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
 M:	Adam Radford <linuxraid@lsi.com>
@@ -156,7 +156,7 @@ M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/r8169.c
+F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
@@ -170,8 +170,7 @@ F:	include/linux/serial_8250.h
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
 L:	netdev@vger.kernel.org
 S:	Orphan / Obsolete
-F:	drivers/net/*8390*
-F:	drivers/net/ax88796.c
+F:	drivers/net/ethernet/8390/
 
 9P FILE SYSTEM
 M:	Eric Van Hensbergen <ericvh@gmail.com>
@@ -214,7 +213,7 @@ ACENIC DRIVER
 M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-acenic@sunsite.dk
 S:	Maintained
-F:	drivers/net/acenic*
+F:	drivers/net/ethernet/alteon/acenic*
 
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
 M:	Peter Feuerer <peter@piie.net>
@@ -746,7 +745,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/mach-ebsa110/
-F:	drivers/net/arm/am79c961a.*
+F:	drivers/net/ethernet/amd/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 M:	Daniel Ribeiro <drwyrm@gmail.com>
@@ -1015,7 +1014,8 @@ F:	arch/arm/include/asm/hardware/ioc.h
 F:	arch/arm/include/asm/hardware/iomd.h
 F:	arch/arm/include/asm/hardware/memc.h
 F:	arch/arm/mach-rpc/
-F:	drivers/net/arm/ether*
+F:	drivers/net/ethernet/i825xx/ether1*
+F:	drivers/net/ethernet/seeq/ether3*
 F:	drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
@@ -1127,7 +1127,7 @@ F:	arch/arm/mach-nuc93x/
 F:	drivers/input/keyboard/w90p910_keypad.c
 F:	drivers/input/touchscreen/w90p910_ts.c
 F:	drivers/watchdog/nuc900_wdt.c
-F:	drivers/net/arm/w90p910_ether.c
+F:	drivers/net/ethernet/nuvoton/w90p910_ether.c
 F:	drivers/mtd/nand/nuc900_nand.c
 F:	drivers/rtc/rtc-nuc900.c
 F:	drivers/spi/spi_nuc900.c
@@ -1230,7 +1230,7 @@ F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
 ATHEROS ATH GENERIC UTILITIES
-M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/net/wireless/ath/*
@@ -1238,7 +1238,7 @@ F:	drivers/net/wireless/ath/*
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
-M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
@@ -1246,11 +1246,19 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
+ATHEROS ATH6KL WIRELESS DRIVER
+M:	Kalle Valo <kvalo@qca.qualcomm.com>
+L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
+S:	Supported
+F:	drivers/net/wireless/ath/ath6kl/
+
 ATHEROS ATH9K WIRELESS DRIVER
-M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
-M:	Jouni Malinen <jmalinen@atheros.com>
-M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
-M:	Senthil Balasubramanian <senthilkumar@atheros.com>
+M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
+M:	Jouni Malinen <jouni@qca.qualcomm.com>
+M:	Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
+M:	Senthil Balasubramanian <senthilb@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath9k
@@ -1282,7 +1290,7 @@ L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
 S:	Maintained
-F:	drivers/net/atlx/
+F:	drivers/net/ethernet/atheros/
 
 ATM
 M:	Chas Williams <chas@cmf.nrl.navy.mil>
@@ -1322,7 +1330,7 @@ F:	include/video/atmel_lcdc.h
 ATMEL MACB ETHERNET DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
-F:	drivers/net/macb.*
+F:	drivers/net/ethernet/cadence/
 
 ATMEL SPI DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -1445,7 +1453,7 @@ BLACKFIN EMAC DRIVER
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
-F:	drivers/net/bfin_mac.*
+F:	drivers/net/ethernet/adi/
 
 BLACKFIN RTC DRIVER
 M:	Mike Frysinger <vapier.adi@gmail.com>
@@ -1526,27 +1534,27 @@ BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Gary Zambrano <zambrano@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/b44.*
+F:	drivers/net/ethernet/broadcom/b44.*
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
 M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/bnx2.*
-F:	drivers/net/bnx2_*
+F:	drivers/net/ethernet/broadcom/bnx2.*
+F:	drivers/net/ethernet/broadcom/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
 M:	Eilon Greenstein <eilong@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/bnx2x/
+F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Matt Carlson <mcarlson@broadcom.com>
 M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/tg3.*
+F:	drivers/net/ethernet/broadcom/tg3.*
 
 BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
 M:	Brett Rudley <brudley@broadcom.com>
@@ -1575,7 +1583,7 @@ BROCADE BNA 10 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <rmody@brocade.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/bna/
+F:	drivers/net/ethernet/brocade/bna/
 
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
@@ -1663,7 +1671,7 @@ CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 M:	Urs Thuermann <urs.thuermann@volkswagen.de>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+L:	linux-can@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1675,7 +1683,7 @@ F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+L:	linux-can@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1759,13 +1767,13 @@ M:	Christian Benvenuti <benve@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
 S:	Supported
-F:	drivers/net/enic/
+F:	drivers/net/ethernet/cisco/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/arm/ep93xx_eth.c
+F:	drivers/net/ethernet/cirrus/ep93xx_eth.c
 
 CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -1905,7 +1913,7 @@ CPMAC ETHERNET DRIVER
 M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/cpmac.c
+F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
 M:	Dave Jones <davej@redhat.com>
@@ -1992,7 +2000,7 @@ M:	Divy Le Ray <divy@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
-F:	drivers/net/cxgb3/
+F:	drivers/net/ethernet/chelsio/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
 M:	Steve Wise <swise@chelsio.com>
@@ -2006,7 +2014,7 @@ M:	Dimitris Michailidis <dm@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
-F:	drivers/net/cxgb4/
+F:	drivers/net/ethernet/chelsio/cxgb4/
 
 CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
 M:	Steve Wise <swise@chelsio.com>
@@ -2020,14 +2028,14 @@ M:	Casey Leedom <leedom@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
-F:	drivers/net/cxgb4vf/
+F:	drivers/net/ethernet/chelsio/cxgb4vf/
 
 STMMAC ETHERNET DRIVER
 M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
 L:	netdev@vger.kernel.org
 W:	http://www.stlinux.com
 S:	Supported
-F:	drivers/net/stmmac/
+F:	drivers/net/ethernet/stmicro/stmmac/
 
 CYBERPRO FB DRIVER
 M:	Russell King <linux@arm.linux.org.uk>
@@ -2071,7 +2079,7 @@ DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
 L:	netdev@vger.kernel.org
 S:	Orphan
 F:	Documentation/networking/dmfe.txt
-F:	drivers/net/tulip/dmfe.c
+F:	drivers/net/ethernet/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
 M:	Kurt Garloff <garloff@suse.de>
@@ -2110,7 +2118,7 @@ F:	net/decnet/
 DEFXX FDDI NETWORK DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
-F:	drivers/net/defxx.*
+F:	drivers/net/fddi/defxx.*
 
 DELL LAPTOP DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
@@ -2477,7 +2485,7 @@ EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
 M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ehea/
+F:	drivers/net/ethernet/ibm/ehea/
 
 EMBEDDED LINUX
 M:	Paul Gortmaker <paul.gortmaker@windriver.com>
@@ -2522,7 +2530,7 @@ ETHEREXPRESS-16 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/eexpress.*
+F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
@@ -2536,7 +2544,7 @@ F:	net/bridge/
 ETHERTEAM 16I DRIVER
 M:	Mika Kuoppala <miku@iki.fi>
 S:	Maintained
-F:	drivers/net/eth16i.c
+F:	drivers/net/ethernet/fujitsu/eth16i.c
 
 EXT2 FILE SYSTEM
 M:	Jan Kara <jack@suse.cz>
@@ -2705,7 +2713,7 @@ M:	Vitaly Bordug <vbordug@ru.mvista.com>
 L:	linuxppc-dev@lists.ozlabs.org
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/fs_enet/
+F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
@@ -2727,7 +2735,7 @@ M:	Li Yang <leoli@freescale.com>
 L:	netdev@vger.kernel.org
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
-F:	drivers/net/ucc_geth*
+F:	drivers/net/ethernet/freescale/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
 M:	Timur Tabi <timur@freescale.com>
@@ -3065,6 +3073,7 @@ S:	Maintained
 F:	include/linux/hippidevice.h
 F:	include/linux/if_hippi.h
 F:	net/802/hippi.c
+F:	drivers/net/hippi/
 
 HOST AP DRIVER
 M:	Jouni Malinen <j@w1.fi>
@@ -3082,7 +3091,7 @@ F:	drivers/platform/x86/tc1100-wmi.c
 HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
 M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
-F:	drivers/net/hp100.*
+F:	drivers/net/ethernet/hp/hp100.*
 
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -3180,7 +3189,7 @@ IBM Power Virtual Ethernet Device Driver
 M:	Santiago Leon <santil@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/ibmveth.*
+F:	drivers/net/ethernet/ibm/ibmveth.*
 
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
@@ -3347,7 +3356,7 @@ F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
 F:	arch/arm/mach-ixp4xx/include/mach/npe.h
 F:	arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
 F:	arch/arm/mach-ixp4xx/ixp4xx_npe.c
-F:	drivers/net/arm/ixp4xx_eth.c
+F:	drivers/net/ethernet/xscale/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
@@ -3359,7 +3368,7 @@ INTEL IXP2000 ETHERNET DRIVER
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ixp2000/
+F:	drivers/net/ethernet/xscale/ixp2000/
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
@@ -3368,13 +3377,13 @@ M:	Bruce Allan <bruce.w.allan@intel.com>
 M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
 M:	Don Skidmore <donald.c.skidmore@intel.com>
 M:	Greg Rose <gregory.v.rose@intel.com>
-M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
 M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-2.6.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
 S:	Supported
 F:	Documentation/networking/e100.txt
 F:	Documentation/networking/e1000.txt
@@ -3384,14 +3393,7 @@ F:	Documentation/networking/igbvf.txt
 F:	Documentation/networking/ixgb.txt
 F:	Documentation/networking/ixgbe.txt
 F:	Documentation/networking/ixgbevf.txt
-F:	drivers/net/e100.c
-F:	drivers/net/e1000/
-F:	drivers/net/e1000e/
-F:	drivers/net/igb/
-F:	drivers/net/igbvf/
-F:	drivers/net/ixgb/
-F:	drivers/net/ixgbe/
-F:	drivers/net/ixgbevf/
+F:	drivers/net/ethernet/intel/
 
 INTEL MRST PMU DRIVER
 M:	Len Brown <len.brown@intel.com>
@@ -3443,7 +3445,7 @@ M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://intellinuxwireless.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
 S:	Supported
 F:	drivers/net/wireless/iwlwifi/
 
@@ -3459,7 +3461,7 @@ IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 S:	Maintained
-F:	drivers/net/ioc3-eth.c
+F:	drivers/net/ethernet/sgi/ioc3-eth.c
 
 IOC3 SERIAL DRIVER
 M:	Pat Gefre <pfg@sgi.com>
@@ -3477,7 +3479,7 @@ M:	Francois Romieu <romieu@fr.zoreil.com>
 M:	Sorbica Shieh <sorbica@icplus.com.tw>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ipg.*
+F:	drivers/net/ethernet/icplus/ipg.*
 
 IPATH DRIVER
 M:	Mike Marciniszyn <infinipath@qlogic.com>
@@ -3625,7 +3627,7 @@ JME NETWORK DRIVER
 M:	Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/jme.*
+F:	drivers/net/ethernet/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
 M:	David Woodhouse <dwmw2@infradead.org>
@@ -4156,7 +4158,7 @@ MARVELL MV643XX ETHERNET DRIVER
 M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/mv643xx_eth.*
+F:	drivers/net/ethernet/marvell/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
 MARVELL MWIFIEX WIRELESS DRIVER
@@ -4370,12 +4372,12 @@ M:	Andrew Gallatin <gallatin@myri.com>
 L:	netdev@vger.kernel.org
 W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported
-F:	drivers/net/myri10ge/
+F:	drivers/net/ethernet/myricom/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
 M:	Tim Hockin <thockin@hockin.org>
 S:	Maintained
-F:	drivers/net/natsemi.c
+F:	drivers/net/ethernet/natsemi/natsemi.c
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
 M:	Daniel Mack <zonque@gmail.com>
@@ -4415,9 +4417,8 @@ W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
 S:	Supported
 F:	Documentation/networking/s2io.txt
-F:	drivers/net/s2io*
 F:	Documentation/networking/vxge.txt
-F:	drivers/net/vxge/
+F:	drivers/net/ethernet/neterion/
 
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
@@ -4531,11 +4532,23 @@ F:	include/linux/if_*
 F:	include/linux/*device.h
 
 NETXEN (1/10) GbE SUPPORT
-M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
+M:	Sony Chacko <sony.chacko@qlogic.com>
+M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
 L:	netdev@vger.kernel.org
 W:	http://www.qlogic.com
 S:	Supported
-F:	drivers/net/netxen/
+F:	drivers/net/ethernet/qlogic/netxen/
+
+NFC SUBSYSTEM
+M:	Lauro Ramos Venancio <lauro.venancio@openbossa.org>
+M:	Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
+M:	Samuel Ortiz <sameo@linux.intel.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	net/nfc/
+F:	include/linux/nfc.h
+F:	include/net/nfc/
+F:	drivers/nfc/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
 M:	Trond Myklebust <Trond.Myklebust@netapp.com>
@@ -4556,7 +4569,7 @@ M:	Jan-Pascal van Best <janpascal@vanbest.org>
 M:	Andreas Mohr <andi@lisas.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ni5010.*
+F:	drivers/net/ethernet/racal/ni5010.*
 
 NILFS2 FILESYSTEM
 M:	KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
@@ -4822,7 +4835,7 @@ PA SEMI ETHERNET DRIVER
 M:	Olof Johansson <olof@lixom.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pasemi_mac.*
+F:	drivers/net/ethernet/pasemi/*
 
 PA SEMI SMBUS DRIVER
 M:	Olof Johansson <olof@lixom.net>
@@ -4969,7 +4982,7 @@ PCNET32 NETWORK DRIVER
 M:	Don Fry <pcnet32@frontier.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pcnet32.c
+F:	drivers/net/ethernet/amd/pcnet32.c
 
 PCRYPT PARALLEL CRYPTO ENGINE
 M:	Steffen Klassert <steffen.klassert@secunet.com>
@@ -5101,7 +5114,7 @@ PPP PROTOCOL DRIVERS AND COMPRESSORS
 M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ppp_*
+F:	drivers/net/ppp/ppp_*
 
 PPP OVER ATM (RFC 2364)
 M:	Mitchell Blank Jr <mitch@sfgoth.com>
@@ -5112,8 +5125,8 @@ F:	include/linux/atmppp.h
 PPP OVER ETHERNET
 M:	Michal Ostrowski <mostrows@earthlink.net>
 S:	Maintained
-F:	drivers/net/pppoe.c
-F:	drivers/net/pppox.c
+F:	drivers/net/ppp/pppoe.c
+F:	drivers/net/ppp/pppox.c
 
 PPP OVER L2TP
 M:	James Chapman <jchapman@katalix.com>
@@ -5134,7 +5147,7 @@ PPTP DRIVER
 M:	Dmitry Kozlov <xeb@mail.ru>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pptp.c
+F:	drivers/net/ppp/pptp.c
 W:	http://sourceforge.net/projects/accel-pptp
 
 PREEMPTIBLE KERNEL
@@ -5163,7 +5176,7 @@ M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@lists.ozlabs.org
 S:	Maintained
-F:	drivers/net/ps3_gelic_net.*
+F:	drivers/net/ethernet/toshiba/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
@@ -5281,23 +5294,24 @@ M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
-F:	drivers/net/qla3xxx.*
+F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
 M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
+M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/qlcnic/
+F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
+M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/qlge/
+F:	drivers/net/ethernet/qlogic/qlge/
 
 QNX4 FILESYSTEM
 M:	Anders Larsen <al@alarsen.net>
@@ -5379,7 +5393,7 @@ RDC R6040 FAST ETHERNET DRIVER
 M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/r6040.c
+F:	drivers/net/ethernet/rdc/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
 M:	Andy Grover <andy.grover@oracle.com>
@@ -5783,7 +5797,7 @@ M:	Ajit Khaparde <ajit.khaparde@emulex.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported
-F:	drivers/net/benet/
+F:	drivers/net/ethernet/emulex/benet/
 
 SFC NETWORK DRIVER
 M:	Solarflare linux maintainers <linux-net-drivers@solarflare.com>
@@ -5791,7 +5805,7 @@ M:	Steve Hodgson <shodgson@solarflare.com>
 M:	Ben Hutchings <bhutchings@solarflare.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/sfc/
+F:	drivers/net/ethernet/sfc/
 
 SGI GRU DRIVER
 M:	Jack Steiner <steiner@sgi.com>
@@ -5857,14 +5871,14 @@ SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/sis190.c
+F:	drivers/net/ethernet/sis/sis190.c
 
 SIS 900/7016 FAST ETHERNET DRIVER
 M:	Daniele Venzano <venza@brownhat.org>
 W:	http://www.brownhat.org/sis900.html
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/sis900.*
+F:	drivers/net/ethernet/sis/sis900.*
 
 SIS 96X I2C/SMBUS DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
@@ -5891,8 +5905,7 @@ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/skge.*
-F:	drivers/net/sky2.*
+F:	drivers/net/ethernet/marvell/sk*
 
 SLAB ALLOCATOR
 M:	Christoph Lameter <cl@linux-foundation.org>
@@ -5906,7 +5919,7 @@ F:	mm/sl?b.c
 SMC91x ETHERNET DRIVER
 M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
-F:	drivers/net/smc91x.*
+F:	drivers/net/ethernet/smsc/smc91x.*
 
 SMM665 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
@@ -5941,13 +5954,13 @@ M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	include/linux/smsc911x.h
-F:	drivers/net/smsc911x.*
+F:	drivers/net/ethernet/smsc/smsc911x.*
 
 SMSC9420 PCI ETHERNET DRIVER
 M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/smsc9420.*
+F:	drivers/net/ethernet/smsc/smsc9420.*
 
 SN-IA64 (Itanium) SUB-PLATFORM
 M:	Jes Sorensen <jes@sgi.com>
@@ -5981,7 +5994,7 @@ SONIC NETWORK DRIVER
 M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/sonic.*
+F:	drivers/net/ethernet/natsemi/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
 M:	Michael Buesch <m@bues.ch>
@@ -6122,7 +6135,7 @@ M:	Jens Osterkamp <jens@de.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/spider_net.txt
-F:	drivers/net/spider_net*
+F:	drivers/net/ethernet/toshiba/spider_net*
 
 SPU FILE SYSTEM
 M:	Jeremy Kerr <jk@ozlabs.org>
@@ -6169,12 +6182,6 @@ M:	Jakub Schmidtke <sjakub@gmail.com>
 S:	Odd Fixes
 F:	drivers/staging/asus_oled/
 
-STAGING - ATHEROS ATH6KL WIRELESS DRIVER
-M:	Luis R. Rodriguez <mcgrof@gmail.com>
-M:	Naveen Singh <nsingh@atheros.com>
-S:	Odd Fixes
-F:	drivers/staging/ath6kl/
-
 STAGING - COMEDI
 M:	Ian Abbott <abbotti@mev.co.uk>
 M:	Mori Hess <fmhess@users.sourceforge.net>
@@ -6300,7 +6307,7 @@ F:	drivers/staging/xgifb/
 STARFIRE/DURALAN NETWORK DRIVER
 M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
-F:	drivers/net/starfire*
+F:	drivers/net/ethernet/adaptec/starfire*
 
 SUN3/3X
 M:	Sam Creasey <sammy@sammy.net>
@@ -6309,6 +6316,7 @@ S:	Maintained
 F:	arch/m68k/kernel/*sun3*
 F:	arch/m68k/sun3*/
 F:	arch/m68k/include/asm/sun3*
+F:	drivers/net/ethernet/i825xx/sun3*
 
 SUPERH
 M:	Paul Mundt <lethal@linux-sh.org>
@@ -6396,7 +6404,7 @@ TEHUTI ETHERNET DRIVER
 M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/tehuti*
+F:	drivers/net/ethernet/tehuti/*
 
 Telecom Clock Driver for MCPL0010
 M:	Mark Gross <mark.gross@intel.com>
@@ -6447,7 +6455,7 @@ W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
 F:	drivers/tty/hvc/hvc_tile.c
-F:	drivers/net/tile/
+F:	drivers/net/ethernet/tile/
 F:	drivers/edac/tile_edac.c
 
 TLAN NETWORK DRIVER
@@ -6456,7 +6464,7 @@ L:	tlan-devel@lists.sourceforge.net (subscribers-only)
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
 F:	Documentation/networking/tlan.txt
-F:	drivers/net/tlan.*
+F:	drivers/net/ethernet/ti/tlan.*
 
 TOMOYO SECURITY MODULE
 M:	Kentaro Takeda <takedakn@nttdata.co.jp>
@@ -6550,7 +6558,7 @@ TULIP NETWORK DRIVERS
 M:	Grant Grundler <grundler@parisc-linux.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/tulip/
+F:	drivers/net/ethernet/tulip/
 
 TUN/TAP driver
 M:	Maxim Krasnyansky <maxk@qualcomm.com>
@@ -6596,7 +6604,7 @@ W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
 F:	arch/h8300/
 F:	drivers/ide/ide-h8300.c
-F:	drivers/net/ne-h8300.c
+F:	drivers/net/ethernet/8390/ne-h8300.c
 
 UDF FILESYSTEM
 M:	Jan Kara <jack@suse.cz>
@@ -7024,7 +7032,7 @@ F:	include/linux/vhost.h
 VIA RHINE NETWORK DRIVER
 M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
-F:	drivers/net/via-rhine.c
+F:	drivers/net/ethernet/via/via-rhine.c
 
 VIAPRO SMBUS DRIVER
 M:	Jean Delvare <khali@linux-fr.org>
@@ -7052,7 +7060,7 @@ VIA VELOCITY NETWORK DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/via-velocity.*
+F:	drivers/net/ethernet/via/via-velocity.*
 
 VLAN (802.1Q)
 M:	Patrick McHardy <kaber@trash.net>

arch/cris/arch-v10/drivers/Kconfig

@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet

arch/cris/arch-v32/drivers/Kconfig

@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet

arch/ia64/hp/sim/simeth.c

@@ -172,7 +172,7 @@ static const struct net_device_ops simeth_netdev_ops = {
 	.ndo_stop		= simeth_close,
 	.ndo_start_xmit		= simeth_tx,
 	.ndo_get_stats		= simeth_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list, /* not yet used */
+	.ndo_set_rx_mode	= set_multicast_list, /* not yet used */
 
 };
 

arch/mips/Kconfig

@@ -92,15 +92,8 @@ config BCM47XX
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SSB
-	select SSB_DRIVER_MIPS
-	select SSB_DRIVER_EXTIF
-	select SSB_EMBEDDED
-	select SSB_B43_PCI_BRIDGE if PCI
-	select SSB_PCICORE_HOSTMODE if PCI
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
 	select CFE
@@ -791,6 +784,7 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/ath79/Kconfig"
+source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"

arch/mips/bcm47xx/Kconfig

@@ -0,0 +1,31 @@
+if BCM47XX
+
+config BCM47XX_SSB
+	bool "SSB Support for Broadcom BCM47XX"
+	select SYS_HAS_CPU_MIPS32_R1
+	select SSB
+	select SSB_DRIVER_MIPS
+	select SSB_DRIVER_EXTIF
+	select SSB_EMBEDDED
+	select SSB_B43_PCI_BRIDGE if PCI
+	select SSB_PCICORE_HOSTMODE if PCI
+	default y
+	help
+	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
+
+	 This will generate an image with support for SSB and MIPS32 R1 instruction set.
+
+config BCM47XX_BCMA
+	bool "BCMA Support for Broadcom BCM47XX"
+	select SYS_HAS_CPU_MIPS32_R2
+	select BCMA
+	select BCMA_HOST_SOC
+	select BCMA_DRIVER_MIPS
+	select BCMA_DRIVER_PCI_HOSTMODE if PCI
+	default y
+	help
+	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
+
+	 This will generate an image with support for BCMA and MIPS32 R2 instruction set.
+
+endif

arch/mips/bcm47xx/Makefile

@@ -3,4 +3,5 @@
 # under Linux.
 #
 
-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o

arch/mips/bcm47xx/gpio.c

@@ -20,42 +20,82 @@ static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
 
 int gpio_request(unsigned gpio, const char *tag)
 {
-	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
-	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-		return -EINVAL;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+			return -EINVAL;
 
-	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
-	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-		return -EINVAL;
+		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+			return -EINVAL;
 
-	if (test_and_set_bit(gpio, gpio_in_use))
-		return -EBUSY;
+		if (test_and_set_bit(gpio, gpio_in_use))
+			return -EBUSY;
 
-	return 0;
+		return 0;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+			return -EINVAL;
+
+		if (test_and_set_bit(gpio, gpio_in_use))
+			return -EBUSY;
+
+		return 0;
+#endif
+	}
+	return -EINVAL;
 }
 EXPORT_SYMBOL(gpio_request);
 
 void gpio_free(unsigned gpio)
 {
-	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
-	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-		return;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
+		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+			return;
+
+		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
+		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+			return;
 
-	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
-	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+		clear_bit(gpio, gpio_in_use);
 		return;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
+			return;
 
-	clear_bit(gpio, gpio_in_use);
+		clear_bit(gpio, gpio_in_use);
+		return;
+#endif
+	}
 }
 EXPORT_SYMBOL(gpio_free);
 
 int gpio_to_irq(unsigned gpio)
 {
-	if (ssb_chipco_available(&ssb_bcm47xx.chipco))
-		return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
-	else if (ssb_extif_available(&ssb_bcm47xx.extif))
-		return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
-	else
-		return -EINVAL;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
+			return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
+		else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
+			return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
+		else
+			return -EINVAL;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
+#endif
+	}
+	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(gpio_to_irq);

arch/mips/bcm47xx/irq.c

@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/irq_cpu.h>
+#include <bcm47xx.h>
 
 void plat_irq_dispatch(void)
 {
@@ -51,5 +52,16 @@ void plat_irq_dispatch(void)
 
 void __init arch_init_irq(void)
 {
+#ifdef CONFIG_BCM47XX_BCMA
+	if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
+		bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
+			     BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31);
+		/*
+		 * the kernel reads the timer irq from some register and thinks
+		 * it's #5, but we offset it by 2 and route to #7
+		 */
+		cp0_compare_irq = 7;
+	}
+#endif
 	mips_cpu_irq_init();
 }

arch/mips/bcm47xx/nvram.c

@@ -26,14 +26,35 @@ static char nvram_buf[NVRAM_SPACE];
 /* Probe for NVRAM header */
 static void early_nvram_init(void)
 {
-	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+#ifdef CONFIG_BCM47XX_SSB
+	struct ssb_mipscore *mcore_ssb;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	struct bcma_drv_cc *bcma_cc;
+#endif
 	struct nvram_header *header;
 	int i;
-	u32 base, lim, off;
+	u32 base = 0;
+	u32 lim = 0;
+	u32 off;
 	u32 *src, *dst;
 
-	base = mcore->flash_window;
-	lim = mcore->flash_window_size;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+		base = mcore_ssb->flash_window;
+		lim = mcore_ssb->flash_window_size;
+		break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
+		base = bcma_cc->pflash.window;
+		lim = bcma_cc->pflash.window_size;
+		break;
+#endif
+	}
 
 	off = FLASH_MIN;
 	while (off <= lim) {

arch/mips/bcm47xx/serial.c

@@ -23,10 +23,11 @@ static struct platform_device uart8250_device = {
 	},
 };
 
-static int __init uart8250_init(void)
+#ifdef CONFIG_BCM47XX_SSB
+static int __init uart8250_init_ssb(void)
 {
 	int i;
-	struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore);
+	struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore);
 
 	memset(&uart8250_data, 0,  sizeof(uart8250_data));
 
@@ -44,6 +45,47 @@ static int __init uart8250_init(void)
 	}
 	return platform_device_register(&uart8250_device);
 }
+#endif
+
+#ifdef CONFIG_BCM47XX_BCMA
+static int __init uart8250_init_bcma(void)
+{
+	int i;
+	struct bcma_drv_cc *cc = &(bcm47xx_bus.bcma.bus.drv_cc);
+
+	memset(&uart8250_data, 0,  sizeof(uart8250_data));
+
+	for (i = 0; i < cc->nr_serial_ports; i++) {
+		struct plat_serial8250_port *p = &(uart8250_data[i]);
+		struct bcma_serial_port *bcma_port;
+		bcma_port = &(cc->serial_ports[i]);
+
+		p->mapbase = (unsigned int) bcma_port->regs;
+		p->membase = (void *) bcma_port->regs;
+		p->irq = bcma_port->irq + 2;
+		p->uartclk = bcma_port->baud_base;
+		p->regshift = bcma_port->reg_shift;
+		p->iotype = UPIO_MEM;
+		p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+	}
+	return platform_device_register(&uart8250_device);
+}
+#endif
+
+static int __init uart8250_init(void)
+{
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		return uart8250_init_ssb();
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		return uart8250_init_bcma();
+#endif
+	}
+	return -EINVAL;
+}
 
 module_init(uart8250_init);
 

arch/mips/bcm47xx/setup.c

@@ -29,21 +29,36 @@
 #include <linux/types.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma_soc.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <asm/mach-bcm47xx/nvram.h>
 
-struct ssb_bus ssb_bcm47xx;
-EXPORT_SYMBOL(ssb_bcm47xx);
+union bcm47xx_bus bcm47xx_bus;
+EXPORT_SYMBOL(bcm47xx_bus);
+
+enum bcm47xx_bus_type bcm47xx_bus_type;
+EXPORT_SYMBOL(bcm47xx_bus_type);
 
 static void bcm47xx_machine_restart(char *command)
 {
 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
 	local_irq_disable();
 	/* Set the watchdog timer to reset immediately */
-	ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+		break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
+		break;
+#endif
+	}
 	while (1)
 		cpu_relax();
 }
@@ -52,11 +67,23 @@ static void bcm47xx_machine_halt(void)
 {
 	/* Disable interrupts and watchdog and spin forever */
 	local_irq_disable();
-	ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+		break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
+		break;
+#endif
+	}
 	while (1)
 		cpu_relax();
 }
 
+#ifdef CONFIG_BCM47XX_SSB
 #define READ_FROM_NVRAM(_outvar, name, buf) \
 	if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
 		sprom->_outvar = simple_strtoul(buf, NULL, 0);
@@ -247,7 +274,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	return 0;
 }
 
-void __init plat_mem_setup(void)
+static void __init bcm47xx_register_ssb(void)
 {
 	int err;
 	char buf[100];
@@ -258,12 +285,12 @@ void __init plat_mem_setup(void)
 		printk(KERN_WARNING "bcm47xx: someone else already registered"
 			" a ssb SPROM callback handler (err %d)\n", err);
 
-	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+	err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)
 		panic("Failed to initialize SSB bus (err %d)\n", err);
 
-	mcore = &ssb_bcm47xx.mipscore;
+	mcore = &bcm47xx_bus.ssb.mipscore;
 	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
 		if (strstr(buf, "console=ttyS1")) {
 			struct ssb_serial_port port;
@@ -276,8 +303,57 @@ void __init plat_mem_setup(void)
 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
 		}
 	}
+}
+#endif
+
+#ifdef CONFIG_BCM47XX_BCMA
+static void __init bcm47xx_register_bcma(void)
+{
+	int err;
+
+	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
+	if (err)
+		panic("Failed to initialize BCMA bus (err %d)\n", err);
+}
+#endif
+
+void __init plat_mem_setup(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	if (c->cputype == CPU_74K) {
+		printk(KERN_INFO "bcm47xx: using bcma bus\n");
+#ifdef CONFIG_BCM47XX_BCMA
+		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
+		bcm47xx_register_bcma();
+#endif
+	} else {
+		printk(KERN_INFO "bcm47xx: using ssb bus\n");
+#ifdef CONFIG_BCM47XX_SSB
+		bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
+		bcm47xx_register_ssb();
+#endif
+	}
 
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
 }
+
+static int __init bcm47xx_register_bus_complete(void)
+{
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		/* Nothing to do */
+		break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_bus_register(&bcm47xx_bus.bcma.bus);
+		break;
+#endif
+	}
+	return 0;
+}
+device_initcall(bcm47xx_register_bus_complete);

arch/mips/bcm47xx/time.c

@@ -30,7 +30,7 @@
 
 void __init plat_time_init(void)
 {
-	unsigned long hz;
+	unsigned long hz = 0;
 
 	/*
 	 * Use deterministic values for initial counter interrupt
@@ -39,7 +39,19 @@ void __init plat_time_init(void)
 	write_c0_count(0);
 	write_c0_compare(0xffff);
 
-	hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+		break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
+		break;
+#endif
+	}
+
 	if (!hz)
 		hz = 100000000;
 

arch/mips/bcm47xx/wgt634u.c

@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int irq, void *ignored)
 
 	/* Interrupts are shared, check if the current one is
 	   a GPIO interrupt. */
-	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
 				   SSB_CHIPCO_IRQ_GPIO))
 		return IRQ_NONE;
 
@@ -132,22 +132,26 @@ static int __init wgt634u_init(void)
 	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
 	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
 	 */
+	u8 *et0mac;
 
-	u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
+	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+		return -ENODEV;
+
+	et0mac = bcm47xx_bus.ssb.sprom.et0mac;
 
 	if (et0mac[0] == 0x00 &&
 	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
 	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
-		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
 
 		printk(KERN_INFO "WGT634U machine detected.\n");
 
 		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
 				 gpio_interrupt, IRQF_SHARED,
-				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
 			gpio_direction_input(WGT634U_GPIO_RESET);
 			gpio_intmask(WGT634U_GPIO_RESET, 1);
-			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
 					    SSB_CHIPCO_IRQ_GPIO,
 					    SSB_CHIPCO_IRQ_GPIO);
 		}

arch/mips/include/asm/mach-bcm47xx/bcm47xx.h

@@ -19,7 +19,29 @@
 #ifndef __ASM_BCM47XX_H
 #define __ASM_BCM47XX_H
 
-/* SSB bus */
-extern struct ssb_bus ssb_bcm47xx;
+#include <linux/ssb/ssb.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
+
+enum bcm47xx_bus_type {
+#ifdef CONFIG_BCM47XX_SSB
+	BCM47XX_BUS_TYPE_SSB,
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	BCM47XX_BUS_TYPE_BCMA,
+#endif
+};
+
+union bcm47xx_bus {
+#ifdef CONFIG_BCM47XX_SSB
+	struct ssb_bus ssb;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	struct bcma_soc bcma;
+#endif
+};
+
+extern union bcm47xx_bus bcm47xx_bus;
+extern enum bcm47xx_bus_type bcm47xx_bus_type;
 
 #endif /* __ASM_BCM47XX_H */

arch/mips/include/asm/mach-bcm47xx/gpio.h

@@ -10,6 +10,7 @@
 #define __BCM47XX_GPIO_H
 
 #include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma.h>
 #include <asm/mach-bcm47xx/bcm47xx.h>
 
 #define BCM47XX_EXTIF_GPIO_LINES	5
@@ -21,41 +22,118 @@ extern int gpio_to_irq(unsigned gpio);
 
 static inline int gpio_get_value(unsigned gpio)
 {
-	return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
+					   1 << gpio);
+#endif
+	}
+	return -EINVAL;
 }
 
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+			     value ? 1 << gpio : 0);
+		return;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+				     value ? 1 << gpio : 0);
+		return;
+#endif
+	}
 }
 
 static inline int gpio_direction_input(unsigned gpio)
 {
-	ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
-	return 0;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
+		return 0;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+				       0);
+		return 0;
+#endif
+	}
+	return -EINVAL;
 }
 
 static inline int gpio_direction_output(unsigned gpio, int value)
 {
-	/* first set the gpio out value */
-	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
-	/* then set the gpio mode */
-	ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
-	return 0;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		/* first set the gpio out value */
+		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
+			     value ? 1 << gpio : 0);
+		/* then set the gpio mode */
+		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
+		return 0;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		/* first set the gpio out value */
+		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+				     value ? 1 << gpio : 0);
+		/* then set the gpio mode */
+		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
+				       1 << gpio);
+		return 0;
+#endif
+	}
+	return -EINVAL;
 }
 
 static inline int gpio_intmask(unsigned gpio, int value)
 {
-	ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
-			 value ? 1 << gpio : 0);
-	return 0;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
+				 value ? 1 << gpio : 0);
+		return 0;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
+					 1 << gpio, value ? 1 << gpio : 0);
+		return 0;
+#endif
+	}
+	return -EINVAL;
 }
 
 static inline int gpio_polarity(unsigned gpio, int value)
 {
-	ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
-			  value ? 1 << gpio : 0);
-	return 0;
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
+				  value ? 1 << gpio : 0);
+		return 0;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
+					  1 << gpio, value ? 1 << gpio : 0);
+		return 0;
+#endif
+	}
+	return -EINVAL;
 }
 
 

arch/mips/pci/pci-bcm47xx.c

@@ -25,6 +25,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/ssb/ssb.h>
+#include <bcm47xx.h>
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 int pcibios_plat_dev_init(struct pci_dev *dev)
 {
+#ifdef CONFIG_BCM47XX_SSB
 	int res;
 	u8 slot, pin;
 
+	if (bcm47xx_bus_type !=  BCM47XX_BUS_TYPE_SSB)
+		return 0;
+
 	res = ssb_pcibios_plat_dev_init(dev);
 	if (res < 0) {
 		printk(KERN_ALERT "PCI: Failed to init device %s\n",
@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	}
 
 	dev->irq = res;
+#endif
 	return 0;
 }

arch/mips/txx9/generic/setup_tx4939.c

@@ -321,7 +321,7 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
 static u32 tx4939_get_eth_speed(struct net_device *dev)
 {
 	struct ethtool_cmd cmd;
-	if (dev_ethtool_get_settings(dev, &cmd))
+	if (__ethtool_get_settings(dev, &cmd))
 		return 100;	/* default 100Mbps */
 
 	return ethtool_cmd_speed(&cmd);

arch/powerpc/Kconfig

@@ -656,6 +656,8 @@ config SBUS
 
 config FSL_SOC
 	bool
+	select HAVE_CAN_FLEXCAN if NET && CAN
+	select PPC_CLOCK if CAN_FLEXCAN
 
 config FSL_PCI
  	bool

arch/powerpc/boot/dts/p1010rdb.dts

@@ -23,6 +23,8 @@
 		ethernet2 = &enet2;
 		pci0 = &pci0;
 		pci1 = &pci1;
+		can0 = &can0;
+		can1 = &can1;
 	};
 
 	memory {
@@ -169,14 +171,6 @@
 			};
 		};
 
-		can0@1c000 {
-			fsl,flexcan-clock-source = "platform";
-		};
-
-		can1@1d000 {
-			fsl,flexcan-clock-source = "platform";
-		};
-
 		usb@22000 {
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/p1010si.dtsi

@@ -140,20 +140,18 @@
 			interrupt-parent = <&mpic>;
 		};
 
-		can0@1c000 {
-			compatible = "fsl,flexcan-v1.0";
+		can0: can@1c000 {
+			compatible = "fsl,p1010-flexcan";
 			reg = <0x1c000 0x1000>;
 			interrupts = <48 0x2>;
 			interrupt-parent = <&mpic>;
-			fsl,flexcan-clock-divider = <2>;
 		};
 
-		can1@1d000 {
-			compatible = "fsl,flexcan-v1.0";
+		can1: can@1d000 {
+			compatible = "fsl,p1010-flexcan";
 			reg = <0x1d000 0x1000>;
 			interrupts = <61 0x2>;
 			interrupt-parent = <&mpic>;
-			fsl,flexcan-clock-divider = <2>;
 		};
 
 		L2: l2-cache-controller@20000 {

arch/powerpc/configs/40x/acadia_defconfig

@@ -44,12 +44,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
 CONFIG_MII=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_DEBUG=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
+CONFIG_IBM_EMAC_DEBUG=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/40x/ep405_defconfig

@@ -42,8 +42,9 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/40x/hcu4_defconfig

@@ -43,8 +43,9 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/40x/kilauea_defconfig

@@ -51,10 +51,11 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/40x/makalu_defconfig

@@ -43,10 +43,11 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/40x/walnut_defconfig

@@ -40,8 +40,9 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/44x/arches_defconfig

@@ -44,10 +44,11 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/44x/bamboo_defconfig

@@ -32,8 +32,9 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/44x/bluestone_defconfig

@@ -38,10 +38,11 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2

arch/powerpc/configs/44x/canyonlands_defconfig

@@ -49,10 +49,11 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/44x/ebony_defconfig

@@ -40,8 +40,9 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/44x/eiger_defconfig

@@ -55,10 +55,11 @@ CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
 CONFIG_I2O=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
 CONFIG_E1000E=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/44x/icon_defconfig

@@ -56,8 +56,9 @@ CONFIG_FUSION_SAS=y
 CONFIG_FUSION_CTL=y
 CONFIG_FUSION_LOGGING=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set

arch/powerpc/configs/44x/katmai_defconfig

@@ -42,8 +42,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/44x/redwood_defconfig

@@ -53,11 +53,12 @@ CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
 CONFIG_I2O=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=256
-CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_DEBUG=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
+CONFIG_IBM_EMAC_DEBUG=y
 CONFIG_E1000E=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/44x/sam440ep_defconfig

@@ -44,8 +44,9 @@ CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 CONFIG_SATA_SIL=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_INPUT_FF_MEMLESS=m

arch/powerpc/configs/44x/sequoia_defconfig

@@ -46,8 +46,9 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/44x/taishan_defconfig

@@ -40,8 +40,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set

arch/powerpc/configs/44x/warp_defconfig

@@ -54,9 +54,10 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
 CONFIG_MII=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_EMAC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set

arch/powerpc/configs/ppc40x_defconfig

@@ -50,8 +50,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_XILINX_SYSACE=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 CONFIG_SERIO=m
 # CONFIG_SERIO_I8042 is not set

arch/powerpc/configs/ppc44x_defconfig

@@ -63,8 +63,9 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
+CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_IBM_EMAC=y
 # CONFIG_INPUT is not set
 CONFIG_SERIO=m
 # CONFIG_SERIO_I8042 is not set

arch/powerpc/platforms/40x/Kconfig

@@ -130,21 +130,21 @@ config 405GP
 	bool
 	select IBM405_ERR77
 	select IBM405_ERR51
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_ZMII
 
 config 405EP
 	bool
 
 config 405EX
 	bool
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII
 
 config 405EZ
 	bool
-	select IBM_NEW_EMAC_NO_FLOW_CTRL
-	select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
-	select IBM_NEW_EMAC_MAL_COMMON_ERR
+	select IBM_EMAC_NO_FLOW_CTRL
+	select IBM_EMAC_MAL_CLR_ICINTSTAT
+	select IBM_EMAC_MAL_COMMON_ERR
 
 config 405GPR
 	bool

arch/powerpc/platforms/44x/Kconfig

@@ -23,7 +23,7 @@ config BLUESTONE
 	default n
 	select PPC44x_SIMPLE
 	select APM821xx
-	select IBM_NEW_EMAC_RGMII
+	select IBM_EMAC_RGMII
 	help
 	  This option enables support for the APM APM821xx Evaluation board.
 
@@ -122,8 +122,8 @@ config CANYONLANDS
 	select PPC4xx_PCI_EXPRESS
 	select PCI_MSI
 	select PPC4xx_MSI
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII
 	help
 	  This option enables support for the AMCC PPC460EX evaluation board.
 
@@ -135,8 +135,8 @@ config GLACIER
 	select 460EX # Odd since it uses 460GT but the effects are the same
 	select PCI
 	select PPC4xx_PCI_EXPRESS
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII
 	help
 	  This option enables support for the AMCC PPC460GT evaluation board.
 
@@ -161,7 +161,7 @@ config EIGER
 	select 460SX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
-	select IBM_NEW_EMAC_RGMII
+	select IBM_EMAC_RGMII
 	help
 	  This option enables support for the AMCC PPC460SX evaluation board.
 
@@ -260,59 +260,59 @@ config 440EP
 	bool
 	select PPC_FPU
 	select IBM440EP_ERR42
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_ZMII
 	select USB_ARCH_HAS_OHCI
 
 config 440EPX
 	bool
 	select PPC_FPU
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII
 
 config 440GRX
 	bool
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII
 
 config 440GP
 	bool
-	select IBM_NEW_EMAC_ZMII
+	select IBM_EMAC_ZMII
 
 config 440GX
 	bool
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII #test only
-	select IBM_NEW_EMAC_TAH  #test only
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII #test only
+	select IBM_EMAC_TAH  #test only
 
 config 440SP
 	bool
 
 config 440SPe
 	bool
-	select IBM_NEW_EMAC_EMAC4
+	select IBM_EMAC_EMAC4
 
 config 460EX
 	bool
 	select PPC_FPU
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_TAH
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_TAH
 
 config 460SX
 	bool
 	select PPC_FPU
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
-	select IBM_NEW_EMAC_TAH
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII
+	select IBM_EMAC_TAH
 
 config APM821xx
 	bool
 	select PPC_FPU
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_TAH
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_TAH
 
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42

arch/powerpc/platforms/cell/Kconfig

@@ -17,10 +17,10 @@ config PPC_CELL_NATIVE
 	select PPC_CELL_COMMON
 	select MPIC
 	select PPC_IO_WORKAROUNDS
-	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII #test only
-	select IBM_NEW_EMAC_TAH  #test only
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII
+	select IBM_EMAC_ZMII #test only
+	select IBM_EMAC_TAH  #test only
 	default n
 
 config PPC_IBM_CELL_BLADE

arch/s390/include/asm/qdio.h

@@ -122,6 +122,40 @@ struct slibe {
 	u64 parms;
 };
 
+/**
+ * struct qaob - queue asynchronous operation block
+ * @res0: reserved parameters
+ * @res1: reserved parameter
+ * @res2: reserved parameter
+ * @res3: reserved parameter
+ * @aorc: asynchronous operation return code
+ * @flags: internal flags
+ * @cbtbs: control block type
+ * @sb_count: number of storage blocks
+ * @sba: storage block element addresses
+ * @dcount: size of storage block elements
+ * @user0: user defineable value
+ * @res4: reserved paramater
+ * @user1: user defineable value
+ * @user2: user defineable value
+ */
+struct qaob {
+	u64 res0[6];
+	u8 res1;
+	u8 res2;
+	u8 res3;
+	u8 aorc;
+	u8 flags;
+	u16 cbtbs;
+	u8 sb_count;
+	u64 sba[QDIO_MAX_ELEMENTS_PER_BUFFER];
+	u16 dcount[QDIO_MAX_ELEMENTS_PER_BUFFER];
+	u64 user0;
+	u64 res4[2];
+	u64 user1;
+	u64 user2;
+} __attribute__ ((packed, aligned(256)));
+
 /**
  * struct slib - storage list information block (SLIB)
  * @nsliba: next SLIB address (if any)
@@ -225,6 +259,41 @@ struct slsb {
 #define CHSC_AC2_DATA_DIV_AVAILABLE	0x0010
 #define CHSC_AC2_DATA_DIV_ENABLED	0x0002
 
+/**
+ * struct qdio_outbuf_state - SBAL related asynchronous operation information
+ *   (for communication with upper layer programs)
+ *   (only required for use with completion queues)
+ * @flags: flags indicating state of buffer
+ * @aob: pointer to QAOB used for the particular SBAL
+ * @user: pointer to upper layer program's state information related to SBAL
+ *        (stored in user1 data of QAOB)
+ */
+struct qdio_outbuf_state {
+	u8 flags;
+	struct qaob *aob;
+	void *user;
+};
+
+#define QDIO_OUTBUF_STATE_FLAG_NONE	0x00
+#define QDIO_OUTBUF_STATE_FLAG_PENDING	0x01
+
+#define CHSC_AC1_INITIATE_INPUTQ	0x80
+
+
+/* qdio adapter-characteristics-1 flag */
+#define AC1_SIGA_INPUT_NEEDED		0x40	/* process input queues */
+#define AC1_SIGA_OUTPUT_NEEDED		0x20	/* process output queues */
+#define AC1_SIGA_SYNC_NEEDED		0x10	/* ask hypervisor to sync */
+#define AC1_AUTOMATIC_SYNC_ON_THININT	0x08	/* set by hypervisor */
+#define AC1_AUTOMATIC_SYNC_ON_OUT_PCI	0x04	/* set by hypervisor */
+#define AC1_SC_QEBSM_AVAILABLE		0x02	/* available for subchannel */
+#define AC1_SC_QEBSM_ENABLED		0x01	/* enabled for subchannel */
+
+#define CHSC_AC2_DATA_DIV_AVAILABLE	0x0010
+#define CHSC_AC2_DATA_DIV_ENABLED	0x0002
+
+#define CHSC_AC3_FORMAT2_CQ_AVAILABLE	0x8000
+
 struct qdio_ssqd_desc {
 	u8 flags;
 	u8:8;
@@ -243,8 +312,7 @@ struct qdio_ssqd_desc {
 	u64 sch_token;
 	u8 mro;
 	u8 mri;
-	u8:8;
-	u8 sbalic;
+	u16 qdioac3;
 	u16:16;
 	u8:8;
 	u8 mmwc;
@@ -280,9 +348,11 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
  * @no_output_qs: number of output queues
  * @input_handler: handler to be called for input queues
  * @output_handler: handler to be called for output queues
+ * @queue_start_poll: polling handlers (one per input queue or NULL)
  * @int_parm: interruption parameter
  * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
  * @output_sbal_addr_array: address of no_output_qs * 128 pointers
+ * @output_sbal_state_array: no_output_qs * 128 state info (for CQ or NULL)
  */
 struct qdio_initialize {
 	struct ccw_device *cdev;
@@ -297,11 +367,12 @@ struct qdio_initialize {
 	unsigned int no_output_qs;
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;
-	void (*queue_start_poll) (struct ccw_device *, int, unsigned long);
+	void (**queue_start_poll) (struct ccw_device *, int, unsigned long);
 	int scan_threshold;
 	unsigned long int_parm;
 	void **input_sbal_addr_array;
 	void **output_sbal_addr_array;
+	struct qdio_outbuf_state *output_sbal_state_array;
 };
 
 #define QDIO_STATE_INACTIVE		0x00000002 /* after qdio_cleanup */
@@ -316,6 +387,7 @@ struct qdio_initialize {
 extern int qdio_allocate(struct qdio_initialize *);
 extern int qdio_establish(struct qdio_initialize *);
 extern int qdio_activate(struct ccw_device *);
+extern void qdio_release_aob(struct qaob *);
 extern int do_QDIO(struct ccw_device *, unsigned int, int, unsigned int,
 		   unsigned int);
 extern int qdio_start_irq(struct ccw_device *, int);

arch/um/drivers/net_kern.c

@@ -368,7 +368,7 @@ static const struct net_device_ops uml_netdev_ops = {
 	.ndo_open 		= uml_net_open,
 	.ndo_stop 		= uml_net_close,
 	.ndo_start_xmit 	= uml_net_start_xmit,
-	.ndo_set_multicast_list = uml_net_set_multicast_list,
+	.ndo_set_rx_mode	= uml_net_set_multicast_list,
 	.ndo_tx_timeout 	= uml_net_tx_timeout,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu 	= uml_net_change_mtu,

arch/xtensa/platforms/iss/network.c

@@ -633,7 +633,7 @@ static const struct net_device_ops iss_netdev_ops = {
 	.ndo_set_mac_address	= iss_net_set_mac,
 	//.ndo_do_ioctl		= iss_net_ioctl,
 	.ndo_tx_timeout		= iss_net_tx_timeout,
-	.ndo_set_multicast_list = iss_net_set_multicast_list,
+	.ndo_set_rx_mode	= iss_net_set_multicast_list,
 };
 
 static int iss_net_configure(int index, char *init)

drivers/atm/eni.c

@@ -1134,8 +1134,9 @@ DPRINTK("doing direct send\n"); /* @@@ well, this doesn't work anyway */
 				    skb_headlen(skb));
 			else
 				put_dma(tx->index,eni_dev->dma,&j,(unsigned long)
-				    skb_shinfo(skb)->frags[i].page + skb_shinfo(skb)->frags[i].page_offset,
-				    skb_shinfo(skb)->frags[i].size);
+				    skb_frag_page(&skb_shinfo(skb)->frags[i]) +
+					skb_shinfo(skb)->frags[i].page_offset,
+				    skb_frag_size(&skb_shinfo(skb)->frags[i]));
 	}
 	if (skb->len & 3)
 		put_dma(tx->index,eni_dev->dma,&j,zeroes,4-(skb->len & 3));

drivers/atm/iphase.c

@@ -818,127 +818,152 @@ static void ia_hw_type(IADEV *iadev) {
 
 }
 
-static void IaFrontEndIntr(IADEV *iadev) {
-  volatile IA_SUNI *suni;
-  volatile ia_mb25_t *mb25;
-  volatile suni_pm7345_t *suni_pm7345;
-
-  if(iadev->phy_type & FE_25MBIT_PHY) {
-     mb25 = (ia_mb25_t*)iadev->phy;
-     iadev->carrier_detect =  Boolean(mb25->mb25_intr_status & MB25_IS_GSB);
-  } else if (iadev->phy_type & FE_DS3_PHY) {
-     suni_pm7345 = (suni_pm7345_t *)iadev->phy;
-     /* clear FRMR interrupts */
-     (void) suni_pm7345->suni_ds3_frm_intr_stat; 
-     iadev->carrier_detect =  
-           Boolean(!(suni_pm7345->suni_ds3_frm_stat & SUNI_DS3_LOSV));
-  } else if (iadev->phy_type & FE_E3_PHY ) {
-     suni_pm7345 = (suni_pm7345_t *)iadev->phy;
-     (void) suni_pm7345->suni_e3_frm_maint_intr_ind;
-     iadev->carrier_detect =
-           Boolean(!(suni_pm7345->suni_e3_frm_fram_intr_ind_stat&SUNI_E3_LOS));
-  }
-  else { 
-     suni = (IA_SUNI *)iadev->phy;
-     (void) suni->suni_rsop_status;
-     iadev->carrier_detect = Boolean(!(suni->suni_rsop_status & SUNI_LOSV));
-  }
-  if (iadev->carrier_detect)
-    printk("IA: SUNI carrier detected\n");
-  else
-    printk("IA: SUNI carrier lost signal\n"); 
-  return;
+static u32 ia_phy_read32(struct iadev_priv *ia, unsigned int reg)
+{
+	return readl(ia->phy + (reg >> 2));
+}
+
+static void ia_phy_write32(struct iadev_priv *ia, unsigned int reg, u32 val)
+{
+	writel(val, ia->phy + (reg >> 2));
+}
+
+static void ia_frontend_intr(struct iadev_priv *iadev)
+{
+	u32 status;
+
+	if (iadev->phy_type & FE_25MBIT_PHY) {
+		status = ia_phy_read32(iadev, MB25_INTR_STATUS);
+		iadev->carrier_detect = (status & MB25_IS_GSB) ? 1 : 0;
+	} else if (iadev->phy_type & FE_DS3_PHY) {
+		ia_phy_read32(iadev, SUNI_DS3_FRM_INTR_STAT);
+		status = ia_phy_read32(iadev, SUNI_DS3_FRM_STAT);
+		iadev->carrier_detect = (status & SUNI_DS3_LOSV) ? 0 : 1;
+	} else if (iadev->phy_type & FE_E3_PHY) {
+		ia_phy_read32(iadev, SUNI_E3_FRM_MAINT_INTR_IND);
+		status = ia_phy_read32(iadev, SUNI_E3_FRM_FRAM_INTR_IND_STAT);
+		iadev->carrier_detect = (status & SUNI_E3_LOS) ? 0 : 1;
+	} else {
+		status = ia_phy_read32(iadev, SUNI_RSOP_STATUS);
+		iadev->carrier_detect = (status & SUNI_LOSV) ? 0 : 1;
+	}
+
+	printk(KERN_INFO "IA: SUNI carrier %s\n",
+		iadev->carrier_detect ? "detected" : "lost signal");
 }
 
-static void ia_mb25_init (IADEV *iadev)
+static void ia_mb25_init(struct iadev_priv *iadev)
 {
-   volatile ia_mb25_t  *mb25 = (ia_mb25_t*)iadev->phy;
 #if 0
    mb25->mb25_master_ctrl = MB25_MC_DRIC | MB25_MC_DREC | MB25_MC_ENABLED;
 #endif
-   mb25->mb25_master_ctrl = MB25_MC_DRIC | MB25_MC_DREC;
-   mb25->mb25_diag_control = 0;
-   /*
-    * Initialize carrier detect state
-    */
-   iadev->carrier_detect =  Boolean(mb25->mb25_intr_status & MB25_IS_GSB);
-   return;
-}                   
+	ia_phy_write32(iadev, MB25_MASTER_CTRL, MB25_MC_DRIC | MB25_MC_DREC);
+	ia_phy_write32(iadev, MB25_DIAG_CONTROL, 0);
+
+	iadev->carrier_detect =
+		(ia_phy_read32(iadev, MB25_INTR_STATUS) & MB25_IS_GSB) ? 1 : 0;
+}
 
-static void ia_suni_pm7345_init (IADEV *iadev)
+struct ia_reg {
+	u16 reg;
+	u16 val;
+};
+
+static void ia_phy_write(struct iadev_priv *iadev,
+			 const struct ia_reg *regs, int len)
 {
-   volatile suni_pm7345_t *suni_pm7345 = (suni_pm7345_t *)iadev->phy;
-   if (iadev->phy_type & FE_DS3_PHY)
-   {
-      iadev->carrier_detect = 
-          Boolean(!(suni_pm7345->suni_ds3_frm_stat & SUNI_DS3_LOSV)); 
-      suni_pm7345->suni_ds3_frm_intr_enbl = 0x17;
-      suni_pm7345->suni_ds3_frm_cfg = 1;
-      suni_pm7345->suni_ds3_tran_cfg = 1;
-      suni_pm7345->suni_config = 0;
-      suni_pm7345->suni_splr_cfg = 0;
-      suni_pm7345->suni_splt_cfg = 0;
-   }
-   else 
-   {
-      iadev->carrier_detect = 
-          Boolean(!(suni_pm7345->suni_e3_frm_fram_intr_ind_stat & SUNI_E3_LOS));
-      suni_pm7345->suni_e3_frm_fram_options = 0x4;
-      suni_pm7345->suni_e3_frm_maint_options = 0x20;
-      suni_pm7345->suni_e3_frm_fram_intr_enbl = 0x1d;
-      suni_pm7345->suni_e3_frm_maint_intr_enbl = 0x30;
-      suni_pm7345->suni_e3_tran_stat_diag_options = 0x0;
-      suni_pm7345->suni_e3_tran_fram_options = 0x1;
-      suni_pm7345->suni_config = SUNI_PM7345_E3ENBL;
-      suni_pm7345->suni_splr_cfg = 0x41;
-      suni_pm7345->suni_splt_cfg = 0x41;
-   } 
-   /*
-    * Enable RSOP loss of signal interrupt.
-    */
-   suni_pm7345->suni_intr_enbl = 0x28;
- 
-   /*
-    * Clear error counters
-    */
-   suni_pm7345->suni_id_reset = 0;
-
-   /*
-    * Clear "PMCTST" in master test register.
-    */
-   suni_pm7345->suni_master_test = 0;
-
-   suni_pm7345->suni_rxcp_ctrl = 0x2c;
-   suni_pm7345->suni_rxcp_fctrl = 0x81;
- 
-   suni_pm7345->suni_rxcp_idle_pat_h1 =
-   	suni_pm7345->suni_rxcp_idle_pat_h2 =
-   	suni_pm7345->suni_rxcp_idle_pat_h3 = 0;
-   suni_pm7345->suni_rxcp_idle_pat_h4 = 1;
- 
-   suni_pm7345->suni_rxcp_idle_mask_h1 = 0xff;
-   suni_pm7345->suni_rxcp_idle_mask_h2 = 0xff;
-   suni_pm7345->suni_rxcp_idle_mask_h3 = 0xff;
-   suni_pm7345->suni_rxcp_idle_mask_h4 = 0xfe;
- 
-   suni_pm7345->suni_rxcp_cell_pat_h1 =
-   	suni_pm7345->suni_rxcp_cell_pat_h2 =
-   	suni_pm7345->suni_rxcp_cell_pat_h3 = 0;
-   suni_pm7345->suni_rxcp_cell_pat_h4 = 1;
- 
-   suni_pm7345->suni_rxcp_cell_mask_h1 =
-   	suni_pm7345->suni_rxcp_cell_mask_h2 =
-   	suni_pm7345->suni_rxcp_cell_mask_h3 =
-   	suni_pm7345->suni_rxcp_cell_mask_h4 = 0xff;
- 
-   suni_pm7345->suni_txcp_ctrl = 0xa4;
-   suni_pm7345->suni_txcp_intr_en_sts = 0x10;
-   suni_pm7345->suni_txcp_idle_pat_h5 = 0x55;
- 
-   suni_pm7345->suni_config &= ~(SUNI_PM7345_LLB |
-                                 SUNI_PM7345_CLB |
-                                 SUNI_PM7345_DLB |
-                                  SUNI_PM7345_PLB);
+	while (len--) {
+		ia_phy_write32(iadev, regs->reg, regs->val);
+		regs++;
+	}
+}
+
+static void ia_suni_pm7345_init_ds3(struct iadev_priv *iadev)
+{
+	static const struct ia_reg suni_ds3_init [] = {
+		{ SUNI_DS3_FRM_INTR_ENBL,	0x17 },
+		{ SUNI_DS3_FRM_CFG,		0x01 },
+		{ SUNI_DS3_TRAN_CFG,		0x01 },
+		{ SUNI_CONFIG,			0 },
+		{ SUNI_SPLR_CFG,		0 },
+		{ SUNI_SPLT_CFG,		0 }
+	};
+	u32 status;
+
+	status = ia_phy_read32(iadev, SUNI_DS3_FRM_STAT);
+	iadev->carrier_detect = (status & SUNI_DS3_LOSV) ? 0 : 1;
+
+	ia_phy_write(iadev, suni_ds3_init, ARRAY_SIZE(suni_ds3_init));
+}
+
+static void ia_suni_pm7345_init_e3(struct iadev_priv *iadev)
+{
+	static const struct ia_reg suni_e3_init [] = {
+		{ SUNI_E3_FRM_FRAM_OPTIONS,		0x04 },
+		{ SUNI_E3_FRM_MAINT_OPTIONS,		0x20 },
+		{ SUNI_E3_FRM_FRAM_INTR_ENBL,		0x1d },
+		{ SUNI_E3_FRM_MAINT_INTR_ENBL,		0x30 },
+		{ SUNI_E3_TRAN_STAT_DIAG_OPTIONS,	0 },
+		{ SUNI_E3_TRAN_FRAM_OPTIONS,		0x01 },
+		{ SUNI_CONFIG,				SUNI_PM7345_E3ENBL },
+		{ SUNI_SPLR_CFG,			0x41 },
+		{ SUNI_SPLT_CFG,			0x41 }
+	};
+	u32 status;
+
+	status = ia_phy_read32(iadev, SUNI_E3_FRM_FRAM_INTR_IND_STAT);
+	iadev->carrier_detect = (status & SUNI_E3_LOS) ? 0 : 1;
+	ia_phy_write(iadev, suni_e3_init, ARRAY_SIZE(suni_e3_init));
+}
+
+static void ia_suni_pm7345_init(struct iadev_priv *iadev)
+{
+	static const struct ia_reg suni_init [] = {
+		/* Enable RSOP loss of signal interrupt. */
+		{ SUNI_INTR_ENBL,		0x28 },
+		/* Clear error counters. */
+		{ SUNI_ID_RESET,		0 },
+		/* Clear "PMCTST" in master test register. */
+		{ SUNI_MASTER_TEST,		0 },
+
+		{ SUNI_RXCP_CTRL,		0x2c },
+		{ SUNI_RXCP_FCTRL,		0x81 },
+
+		{ SUNI_RXCP_IDLE_PAT_H1,	0 },
+		{ SUNI_RXCP_IDLE_PAT_H2,	0 },
+		{ SUNI_RXCP_IDLE_PAT_H3,	0 },
+		{ SUNI_RXCP_IDLE_PAT_H4,	0x01 },
+
+		{ SUNI_RXCP_IDLE_MASK_H1,	0xff },
+		{ SUNI_RXCP_IDLE_MASK_H2,	0xff },
+		{ SUNI_RXCP_IDLE_MASK_H3,	0xff },
+		{ SUNI_RXCP_IDLE_MASK_H4,	0xfe },
+
+		{ SUNI_RXCP_CELL_PAT_H1,	0 },
+		{ SUNI_RXCP_CELL_PAT_H2,	0 },
+		{ SUNI_RXCP_CELL_PAT_H3,	0 },
+		{ SUNI_RXCP_CELL_PAT_H4,	0x01 },
+
+		{ SUNI_RXCP_CELL_MASK_H1,	0xff },
+		{ SUNI_RXCP_CELL_MASK_H2,	0xff },
+		{ SUNI_RXCP_CELL_MASK_H3,	0xff },
+		{ SUNI_RXCP_CELL_MASK_H4,	0xff },
+
+		{ SUNI_TXCP_CTRL,		0xa4 },
+		{ SUNI_TXCP_INTR_EN_STS,	0x10 },
+		{ SUNI_TXCP_IDLE_PAT_H5,	0x55 }
+	};
+
+	if (iadev->phy_type & FE_DS3_PHY)
+		ia_suni_pm7345_init_ds3(iadev);
+	else
+		ia_suni_pm7345_init_e3(iadev);
+
+	ia_phy_write(iadev, suni_init, ARRAY_SIZE(suni_init));
+
+	ia_phy_write32(iadev, SUNI_CONFIG, ia_phy_read32(iadev, SUNI_CONFIG) &
+		~(SUNI_PM7345_LLB | SUNI_PM7345_CLB |
+		  SUNI_PM7345_DLB | SUNI_PM7345_PLB));
 #ifdef __SNMP__
    suni_pm7345->suni_rxcp_intr_en_sts |= SUNI_OOCDE;
 #endif /* __SNMP__ */
@@ -1425,10 +1450,10 @@ static int rx_init(struct atm_dev *dev)
 	       iadev->dma + IPHASE5575_RX_LIST_ADDR);  
 	IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n",
                       iadev->dma+IPHASE5575_TX_LIST_ADDR,
-                      *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR));  
+                      readl(iadev->dma + IPHASE5575_TX_LIST_ADDR));
 	printk("Rx Dle list addr: 0x%p value: 0x%0x\n",
                       iadev->dma+IPHASE5575_RX_LIST_ADDR,
-                      *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));)  
+                      readl(iadev->dma + IPHASE5575_RX_LIST_ADDR));)
   
 	writew(0xffff, iadev->reass_reg+REASS_MASK_REG);  
 	writew(0, iadev->reass_reg+MODE_REG);  
@@ -2208,7 +2233,7 @@ static irqreturn_t ia_int(int irq, void *dev_id)
 	if (status & STAT_DLERINT)  
 	{  
 	   /* Clear this bit by writing a 1 to it. */  
-	   *(u_int *)(iadev->reg+IPHASE5575_BUS_STATUS_REG) = STAT_DLERINT;
+	   writel(STAT_DLERINT, iadev->reg + IPHASE5575_BUS_STATUS_REG);
 	   rx_dle_intr(dev);  
 	}  
 	if (status & STAT_SEGINT)  
@@ -2219,13 +2244,13 @@ static irqreturn_t ia_int(int irq, void *dev_id)
 	}  
 	if (status & STAT_DLETINT)  
 	{  
-	   *(u_int *)(iadev->reg+IPHASE5575_BUS_STATUS_REG) = STAT_DLETINT;  
+	   writel(STAT_DLETINT, iadev->reg + IPHASE5575_BUS_STATUS_REG);
 	   tx_dle_intr(dev);  
 	}  
 	if (status & (STAT_FEINT | STAT_ERRINT | STAT_MARKINT))  
 	{  
            if (status & STAT_FEINT) 
-               IaFrontEndIntr(iadev);
+               ia_frontend_intr(iadev);
 	}  
    }
    return IRQ_RETVAL(handled);
@@ -2556,7 +2581,7 @@ static int __devinit ia_start(struct atm_dev *dev)
 				goto err_free_rx;
 		}
 		/* Get iadev->carrier_detect status */
-		IaFrontEndIntr(iadev);
+		ia_frontend_intr(iadev);
 	}
 	return 0;
 
@@ -2827,7 +2852,7 @@ static int ia_ioctl(struct atm_dev *dev, unsigned int cmd, void __user *arg)
 
          case 0xb:
 	    if (!capable(CAP_NET_ADMIN)) return -EPERM;
-            IaFrontEndIntr(iadev);
+            ia_frontend_intr(iadev);
             break;
          case 0xa:
 	    if (!capable(CAP_NET_ADMIN)) return -EPERM;

drivers/atm/iphase.h

@@ -889,79 +889,71 @@ typedef struct ia_rtn_q {
 } IARTN_Q;
 
 #define SUNI_LOSV   	0x04
-typedef struct {
-        u32   suni_master_reset;      /* SUNI Master Reset and Identity     */
-        u32   suni_master_config;     /* SUNI Master Configuration          */
-        u32   suni_master_intr_stat;  /* SUNI Master Interrupt Status       */
-        u32   suni_reserved1;         /* Reserved                           */
-        u32   suni_master_clk_monitor;/* SUNI Master Clock Monitor          */
-        u32   suni_master_control;    /* SUNI Master Clock Monitor          */
-        u32   suni_reserved2[10];     /* Reserved                           */
-
-        u32   suni_rsop_control;      /* RSOP Control/Interrupt Enable      */
-        u32   suni_rsop_status;       /* RSOP Status/Interrupt States       */
-        u32   suni_rsop_section_bip8l;/* RSOP Section BIP-8 LSB             */
-        u32   suni_rsop_section_bip8m;/* RSOP Section BIP-8 MSB             */
-
-        u32   suni_tsop_control;      /* TSOP Control                       */
-        u32   suni_tsop_diag;         /* TSOP Disgnostics                   */
-        u32   suni_tsop_reserved[2];  /* TSOP Reserved                      */
-
-        u32   suni_rlop_cs;           /* RLOP Control/Status                */
-        u32   suni_rlop_intr;         /* RLOP Interrupt Enable/Status       */
-        u32   suni_rlop_line_bip24l;  /* RLOP Line BIP-24 LSB               */
-        u32   suni_rlop_line_bip24;   /* RLOP Line BIP-24                   */
-        u32   suni_rlop_line_bip24m;  /* RLOP Line BIP-24 MSB               */
-        u32   suni_rlop_line_febel;   /* RLOP Line FEBE LSB                 */
-        u32   suni_rlop_line_febe;    /* RLOP Line FEBE                     */
-        u32   suni_rlop_line_febem;   /* RLOP Line FEBE MSB                 */
-
-        u32   suni_tlop_control;      /* TLOP Control                       */
-        u32   suni_tlop_disg;         /* TLOP Disgnostics                   */
-        u32   suni_tlop_reserved[14]; /* TLOP Reserved                      */
-
-        u32   suni_rpop_cs;           /* RPOP Status/Control                */
-        u32   suni_rpop_intr;         /* RPOP Interrupt/Status              */
-        u32   suni_rpop_reserved;     /* RPOP Reserved                      */
-        u32   suni_rpop_intr_ena;     /* RPOP Interrupt Enable              */
-        u32   suni_rpop_reserved1[3]; /* RPOP Reserved                      */
-        u32   suni_rpop_path_sig;     /* RPOP Path Signal Label             */
-        u32   suni_rpop_bip8l;        /* RPOP Path BIP-8 LSB                */
-        u32   suni_rpop_bip8m;        /* RPOP Path BIP-8 MSB                */
-        u32   suni_rpop_febel;        /* RPOP Path FEBE LSB                 */
-        u32   suni_rpop_febem;        /* RPOP Path FEBE MSB                 */
-        u32   suni_rpop_reserved2[4]; /* RPOP Reserved                      */
-
-        u32   suni_tpop_cntrl_daig;   /* TPOP Control/Disgnostics           */
-        u32   suni_tpop_pointer_ctrl; /* TPOP Pointer Control               */
-        u32   suni_tpop_sourcer_ctrl; /* TPOP Source Control                */
-        u32   suni_tpop_reserved1[2]; /* TPOP Reserved                      */
-        u32   suni_tpop_arb_prtl;     /* TPOP Arbitrary Pointer LSB         */
-        u32   suni_tpop_arb_prtm;     /* TPOP Arbitrary Pointer MSB         */
-        u32   suni_tpop_reserved2;    /* TPOP Reserved                      */
-        u32   suni_tpop_path_sig;     /* TPOP Path Signal Lable             */
-        u32   suni_tpop_path_status;  /* TPOP Path Status                   */
-        u32   suni_tpop_reserved3[6]; /* TPOP Reserved                      */              
-
-        u32   suni_racp_cs;           /* RACP Control/Status                */
-        u32   suni_racp_intr;         /* RACP Interrupt Enable/Status       */
-        u32   suni_racp_hdr_pattern;  /* RACP Match Header Pattern          */
-        u32   suni_racp_hdr_mask;     /* RACP Match Header Mask             */
-        u32   suni_racp_corr_hcs;     /* RACP Correctable HCS Error Count   */
-        u32   suni_racp_uncorr_hcs;   /* RACP Uncorrectable HCS Error Count */
-        u32   suni_racp_reserved[10]; /* RACP Reserved                      */
-
-        u32   suni_tacp_control;      /* TACP Control                       */
-        u32   suni_tacp_idle_hdr_pat; /* TACP Idle Cell Header Pattern      */
-        u32   suni_tacp_idle_pay_pay; /* TACP Idle Cell Payld Octet Pattern */
-        u32   suni_tacp_reserved[5];  /* TACP Reserved                      */
-
-        u32   suni_reserved3[24];     /* Reserved                           */
-
-        u32   suni_master_test;       /* SUNI Master Test                   */
-        u32   suni_reserved_test;     /* SUNI Reserved for Test             */
-} IA_SUNI;
-
+enum ia_suni {
+	SUNI_MASTER_RESET	= 0x000, /* SUNI Master Reset and Identity   */
+	SUNI_MASTER_CONFIG	= 0x004, /* SUNI Master Configuration        */
+	SUNI_MASTER_INTR_STAT	= 0x008, /* SUNI Master Interrupt Status     */
+	SUNI_RESERVED1		= 0x00c, /* Reserved                         */
+	SUNI_MASTER_CLK_MONITOR	= 0x010, /* SUNI Master Clock Monitor        */
+	SUNI_MASTER_CONTROL	= 0x014, /* SUNI Master Clock Monitor        */
+					 /* Reserved (10)                    */
+	SUNI_RSOP_CONTROL	= 0x040, /* RSOP Control/Interrupt Enable    */
+	SUNI_RSOP_STATUS	= 0x044, /* RSOP Status/Interrupt States     */
+	SUNI_RSOP_SECTION_BIP8L	= 0x048, /* RSOP Section BIP-8 LSB           */
+	SUNI_RSOP_SECTION_BIP8M	= 0x04c, /* RSOP Section BIP-8 MSB           */
+
+	SUNI_TSOP_CONTROL	= 0x050, /* TSOP Control                     */
+	SUNI_TSOP_DIAG		= 0x054, /* TSOP Disgnostics                 */
+					 /* Reserved (2)                     */
+	SUNI_RLOP_CS		= 0x060, /* RLOP Control/Status              */
+	SUNI_RLOP_INTR		= 0x064, /* RLOP Interrupt Enable/Status     */
+	SUNI_RLOP_LINE_BIP24L	= 0x068, /* RLOP Line BIP-24 LSB             */
+	SUNI_RLOP_LINE_BIP24	= 0x06c, /* RLOP Line BIP-24                 */
+	SUNI_RLOP_LINE_BIP24M	= 0x070, /* RLOP Line BIP-24 MSB             */
+	SUNI_RLOP_LINE_FEBEL	= 0x074, /* RLOP Line FEBE LSB               */
+	SUNI_RLOP_LINE_FEBE	= 0x078, /* RLOP Line FEBE                   */
+	SUNI_RLOP_LINE_FEBEM	= 0x07c, /* RLOP Line FEBE MSB               */
+
+	SUNI_TLOP_CONTROL	= 0x080, /* TLOP Control                     */
+	SUNI_TLOP_DISG		= 0x084, /* TLOP Disgnostics                 */
+					 /* Reserved (14)                    */
+	SUNI_RPOP_CS		= 0x0c0, /* RPOP Status/Control              */
+	SUNI_RPOP_INTR		= 0x0c4, /* RPOP Interrupt/Status            */
+	SUNI_RPOP_RESERVED	= 0x0c8, /* RPOP Reserved                    */
+	SUNI_RPOP_INTR_ENA	= 0x0cc, /* RPOP Interrupt Enable            */
+					 /* Reserved (3)                     */
+	SUNI_RPOP_PATH_SIG	= 0x0dc, /* RPOP Path Signal Label           */
+	SUNI_RPOP_BIP8L		= 0x0e0, /* RPOP Path BIP-8 LSB              */
+	SUNI_RPOP_BIP8M		= 0x0e4, /* RPOP Path BIP-8 MSB              */
+	SUNI_RPOP_FEBEL		= 0x0e8, /* RPOP Path FEBE LSB               */
+	SUNI_RPOP_FEBEM		= 0x0ec, /* RPOP Path FEBE MSB               */
+					 /* Reserved (4)                     */
+	SUNI_TPOP_CNTRL_DAIG	= 0x100, /* TPOP Control/Disgnostics         */
+	SUNI_TPOP_POINTER_CTRL	= 0x104, /* TPOP Pointer Control             */
+	SUNI_TPOP_SOURCER_CTRL	= 0x108, /* TPOP Source Control              */
+					 /* Reserved (2)                     */
+	SUNI_TPOP_ARB_PRTL	= 0x114, /* TPOP Arbitrary Pointer LSB       */
+	SUNI_TPOP_ARB_PRTM	= 0x118, /* TPOP Arbitrary Pointer MSB       */
+	SUNI_TPOP_RESERVED2	= 0x11c, /* TPOP Reserved                    */
+	SUNI_TPOP_PATH_SIG	= 0x120, /* TPOP Path Signal Lable           */
+	SUNI_TPOP_PATH_STATUS	= 0x124, /* TPOP Path Status                 */
+					 /* Reserved (6)                     */
+	SUNI_RACP_CS		= 0x140, /* RACP Control/Status              */
+	SUNI_RACP_INTR		= 0x144, /* RACP Interrupt Enable/Status     */
+	SUNI_RACP_HDR_PATTERN	= 0x148, /* RACP Match Header Pattern        */
+	SUNI_RACP_HDR_MASK	= 0x14c, /* RACP Match Header Mask           */
+	SUNI_RACP_CORR_HCS	= 0x150, /* RACP Correctable HCS Error Count */
+	SUNI_RACP_UNCORR_HCS	= 0x154, /* RACP Uncorrectable HCS Err Count */
+					 /* Reserved (10)                    */
+	SUNI_TACP_CONTROL	= 0x180, /* TACP Control                     */
+	SUNI_TACP_IDLE_HDR_PAT	= 0x184, /* TACP Idle Cell Header Pattern    */
+	SUNI_TACP_IDLE_PAY_PAY	= 0x188, /* TACP Idle Cell Payld Octet Patrn */
+					 /* Reserved (5)                     */
+					 /* Reserved (24)                    */
+	/* FIXME: unused but name conflicts.
+	 * SUNI_MASTER_TEST	= 0x200,    SUNI Master Test                 */
+	SUNI_RESERVED_TEST	= 0x204  /* SUNI Reserved for Test           */
+};
 
 typedef struct _SUNI_STATS_
 {
@@ -993,13 +985,11 @@ typedef struct _SUNI_STATS_
    u32 racp_uchcs_count;            // uncorrectable HCS error count
 } IA_SUNI_STATS; 
 
-typedef struct iadev_t {  
+typedef struct iadev_priv {
 	/*-----base pointers into (i)chipSAR+ address space */   
-	u32 __iomem *phy;		/* base pointer into phy(SUNI) */  
-	u32 __iomem *dma;		/* base pointer into DMA control   
-						registers */  
-	u32 __iomem *reg;		/* base pointer to SAR registers  
-					   - Bus Interface Control Regs */  
+	u32 __iomem *phy;	/* Base pointer into phy (SUNI). */
+	u32 __iomem *dma;	/* Base pointer into DMA control registers. */
+	u32 __iomem *reg;	/* Base pointer to SAR registers. */
 	u32 __iomem *seg_reg;		/* base pointer to segmentation engine  
 						internal registers */  
 	u32 __iomem *reass_reg;		/* base pointer to reassemble engine  
@@ -1071,14 +1061,14 @@ typedef struct iadev_t {
 #define INPH_IA_VCC(v) ((struct ia_vcc *) (v)->dev_data)  
 
 /******************* IDT77105 25MB/s PHY DEFINE *****************************/
-typedef struct {
-	u_int	mb25_master_ctrl;	/* Master control		     */
-	u_int	mb25_intr_status;	/* Interrupt status		     */
-	u_int	mb25_diag_control;	/* Diagnostic control		     */
-	u_int	mb25_led_hec;		/* LED driver and HEC status/control */
-	u_int	mb25_low_byte_counter;	/* Low byte counter		     */
-	u_int	mb25_high_byte_counter;	/* High byte counter		     */
-} ia_mb25_t;
+enum ia_mb25 {
+	MB25_MASTER_CTRL	= 0x00, /* Master control		     */
+	MB25_INTR_STATUS	= 0x04,	/* Interrupt status		     */
+	MB25_DIAG_CONTROL	= 0x08,	/* Diagnostic control		     */
+	MB25_LED_HEC		= 0x0c,	/* LED driver and HEC status/control */
+	MB25_LOW_BYTE_COUNTER	= 0x10,
+	MB25_HIGH_BYTE_COUNTER	= 0x14
+};
 
 /*
  * Master Control
@@ -1127,122 +1117,121 @@ typedef struct {
 #define FE_E3_PHY       0x0090          /* E3 */
 		     
 /*********************** SUNI_PM7345 PHY DEFINE HERE *********************/
-typedef struct _suni_pm7345_t
-{
-    u_int suni_config;     /* SUNI Configuration */
-    u_int suni_intr_enbl;  /* SUNI Interrupt Enable */
-    u_int suni_intr_stat;  /* SUNI Interrupt Status */
-    u_int suni_control;    /* SUNI Control */
-    u_int suni_id_reset;   /* SUNI Reset and Identity */
-    u_int suni_data_link_ctrl;
-    u_int suni_rboc_conf_intr_enbl;
-    u_int suni_rboc_stat;
-    u_int suni_ds3_frm_cfg;
-    u_int suni_ds3_frm_intr_enbl;
-    u_int suni_ds3_frm_intr_stat;
-    u_int suni_ds3_frm_stat;
-    u_int suni_rfdl_cfg;
-    u_int suni_rfdl_enbl_stat;
-    u_int suni_rfdl_stat;
-    u_int suni_rfdl_data;
-    u_int suni_pmon_chng;
-    u_int suni_pmon_intr_enbl_stat;
-    u_int suni_reserved1[0x13-0x11];
-    u_int suni_pmon_lcv_evt_cnt_lsb;
-    u_int suni_pmon_lcv_evt_cnt_msb;
-    u_int suni_pmon_fbe_evt_cnt_lsb;
-    u_int suni_pmon_fbe_evt_cnt_msb;
-    u_int suni_pmon_sez_det_cnt_lsb;
-    u_int suni_pmon_sez_det_cnt_msb;
-    u_int suni_pmon_pe_evt_cnt_lsb;
-    u_int suni_pmon_pe_evt_cnt_msb;
-    u_int suni_pmon_ppe_evt_cnt_lsb;
-    u_int suni_pmon_ppe_evt_cnt_msb;
-    u_int suni_pmon_febe_evt_cnt_lsb;
-    u_int suni_pmon_febe_evt_cnt_msb;
-    u_int suni_ds3_tran_cfg;
-    u_int suni_ds3_tran_diag;
-    u_int suni_reserved2[0x23-0x21];
-    u_int suni_xfdl_cfg;
-    u_int suni_xfdl_intr_st;
-    u_int suni_xfdl_xmit_data;
-    u_int suni_xboc_code;
-    u_int suni_splr_cfg;
-    u_int suni_splr_intr_en;
-    u_int suni_splr_intr_st;
-    u_int suni_splr_status;
-    u_int suni_splt_cfg;
-    u_int suni_splt_cntl;
-    u_int suni_splt_diag_g1;
-    u_int suni_splt_f1;
-    u_int suni_cppm_loc_meters;
-    u_int suni_cppm_chng_of_cppm_perf_meter;
-    u_int suni_cppm_b1_err_cnt_lsb;
-    u_int suni_cppm_b1_err_cnt_msb;
-    u_int suni_cppm_framing_err_cnt_lsb;
-    u_int suni_cppm_framing_err_cnt_msb;
-    u_int suni_cppm_febe_cnt_lsb;
-    u_int suni_cppm_febe_cnt_msb;
-    u_int suni_cppm_hcs_err_cnt_lsb;
-    u_int suni_cppm_hcs_err_cnt_msb;
-    u_int suni_cppm_idle_un_cell_cnt_lsb;
-    u_int suni_cppm_idle_un_cell_cnt_msb;
-    u_int suni_cppm_rcv_cell_cnt_lsb;
-    u_int suni_cppm_rcv_cell_cnt_msb;
-    u_int suni_cppm_xmit_cell_cnt_lsb;
-    u_int suni_cppm_xmit_cell_cnt_msb;
-    u_int suni_rxcp_ctrl;
-    u_int suni_rxcp_fctrl;
-    u_int suni_rxcp_intr_en_sts;
-    u_int suni_rxcp_idle_pat_h1;
-    u_int suni_rxcp_idle_pat_h2;
-    u_int suni_rxcp_idle_pat_h3;
-    u_int suni_rxcp_idle_pat_h4;
-    u_int suni_rxcp_idle_mask_h1;
-    u_int suni_rxcp_idle_mask_h2;
-    u_int suni_rxcp_idle_mask_h3;
-    u_int suni_rxcp_idle_mask_h4;
-    u_int suni_rxcp_cell_pat_h1;
-    u_int suni_rxcp_cell_pat_h2;
-    u_int suni_rxcp_cell_pat_h3;
-    u_int suni_rxcp_cell_pat_h4;
-    u_int suni_rxcp_cell_mask_h1;
-    u_int suni_rxcp_cell_mask_h2;
-    u_int suni_rxcp_cell_mask_h3;
-    u_int suni_rxcp_cell_mask_h4;
-    u_int suni_rxcp_hcs_cs;
-    u_int suni_rxcp_lcd_cnt_threshold;
-    u_int suni_reserved3[0x57-0x54];
-    u_int suni_txcp_ctrl;
-    u_int suni_txcp_intr_en_sts;
-    u_int suni_txcp_idle_pat_h1;
-    u_int suni_txcp_idle_pat_h2;
-    u_int suni_txcp_idle_pat_h3;
-    u_int suni_txcp_idle_pat_h4;
-    u_int suni_txcp_idle_pat_h5;
-    u_int suni_txcp_idle_payload;
-    u_int suni_e3_frm_fram_options;
-    u_int suni_e3_frm_maint_options;
-    u_int suni_e3_frm_fram_intr_enbl;
-    u_int suni_e3_frm_fram_intr_ind_stat;
-    u_int suni_e3_frm_maint_intr_enbl;
-    u_int suni_e3_frm_maint_intr_ind;
-    u_int suni_e3_frm_maint_stat;
-    u_int suni_reserved4;
-    u_int suni_e3_tran_fram_options;
-    u_int suni_e3_tran_stat_diag_options;
-    u_int suni_e3_tran_bip_8_err_mask;
-    u_int suni_e3_tran_maint_adapt_options;
-    u_int suni_ttb_ctrl;
-    u_int suni_ttb_trail_trace_id_stat;
-    u_int suni_ttb_ind_addr;
-    u_int suni_ttb_ind_data;
-    u_int suni_ttb_exp_payload_type;
-    u_int suni_ttb_payload_type_ctrl_stat;
-    u_int suni_pad5[0x7f-0x71];
-    u_int suni_master_test;
-    u_int suni_pad6[0xff-0x80];
-}suni_pm7345_t;
+enum suni_pm7345 {
+	SUNI_CONFIG			= 0x000, /* SUNI Configuration */
+	SUNI_INTR_ENBL			= 0x004, /* SUNI Interrupt Enable */
+	SUNI_INTR_STAT			= 0x008, /* SUNI Interrupt Status */
+	SUNI_CONTROL			= 0x00c, /* SUNI Control */
+	SUNI_ID_RESET			= 0x010, /* SUNI Reset and Identity */
+	SUNI_DATA_LINK_CTRL		= 0x014,
+	SUNI_RBOC_CONF_INTR_ENBL	= 0x018,
+	SUNI_RBOC_STAT			= 0x01c,
+	SUNI_DS3_FRM_CFG		= 0x020,
+	SUNI_DS3_FRM_INTR_ENBL		= 0x024,
+	SUNI_DS3_FRM_INTR_STAT		= 0x028,
+	SUNI_DS3_FRM_STAT		= 0x02c,
+	SUNI_RFDL_CFG			= 0x030,
+	SUNI_RFDL_ENBL_STAT		= 0x034,
+	SUNI_RFDL_STAT			= 0x038,
+	SUNI_RFDL_DATA			= 0x03c,
+	SUNI_PMON_CHNG			= 0x040,
+	SUNI_PMON_INTR_ENBL_STAT	= 0x044,
+	/* SUNI_RESERVED1 (0x13 - 0x11) */
+	SUNI_PMON_LCV_EVT_CNT_LSB	= 0x050,
+	SUNI_PMON_LCV_EVT_CNT_MSB	= 0x054,
+	SUNI_PMON_FBE_EVT_CNT_LSB	= 0x058,
+	SUNI_PMON_FBE_EVT_CNT_MSB	= 0x05c,
+	SUNI_PMON_SEZ_DET_CNT_LSB	= 0x060,
+	SUNI_PMON_SEZ_DET_CNT_MSB	= 0x064,
+	SUNI_PMON_PE_EVT_CNT_LSB	= 0x068,
+	SUNI_PMON_PE_EVT_CNT_MSB	= 0x06c,
+	SUNI_PMON_PPE_EVT_CNT_LSB	= 0x070,
+	SUNI_PMON_PPE_EVT_CNT_MSB	= 0x074,
+	SUNI_PMON_FEBE_EVT_CNT_LSB	= 0x078,
+	SUNI_PMON_FEBE_EVT_CNT_MSB	= 0x07c,
+	SUNI_DS3_TRAN_CFG		= 0x080,
+	SUNI_DS3_TRAN_DIAG		= 0x084,
+	/* SUNI_RESERVED2 (0x23 - 0x21) */
+	SUNI_XFDL_CFG			= 0x090,
+	SUNI_XFDL_INTR_ST		= 0x094,
+	SUNI_XFDL_XMIT_DATA		= 0x098,
+	SUNI_XBOC_CODE			= 0x09c,
+	SUNI_SPLR_CFG			= 0x0a0,
+	SUNI_SPLR_INTR_EN		= 0x0a4,
+	SUNI_SPLR_INTR_ST		= 0x0a8,
+	SUNI_SPLR_STATUS		= 0x0ac,
+	SUNI_SPLT_CFG			= 0x0b0,
+	SUNI_SPLT_CNTL			= 0x0b4,
+	SUNI_SPLT_DIAG_G1		= 0x0b8,
+	SUNI_SPLT_F1			= 0x0bc,
+	SUNI_CPPM_LOC_METERS		= 0x0c0,
+	SUNI_CPPM_CHG_OF_CPPM_PERF_METR	= 0x0c4,
+	SUNI_CPPM_B1_ERR_CNT_LSB	= 0x0c8,
+	SUNI_CPPM_B1_ERR_CNT_MSB	= 0x0cc,
+	SUNI_CPPM_FRAMING_ERR_CNT_LSB	= 0x0d0,
+	SUNI_CPPM_FRAMING_ERR_CNT_MSB	= 0x0d4,
+	SUNI_CPPM_FEBE_CNT_LSB		= 0x0d8,
+	SUNI_CPPM_FEBE_CNT_MSB		= 0x0dc,
+	SUNI_CPPM_HCS_ERR_CNT_LSB	= 0x0e0,
+	SUNI_CPPM_HCS_ERR_CNT_MSB	= 0x0e4,
+	SUNI_CPPM_IDLE_UN_CELL_CNT_LSB	= 0x0e8,
+	SUNI_CPPM_IDLE_UN_CELL_CNT_MSB	= 0x0ec,
+	SUNI_CPPM_RCV_CELL_CNT_LSB	= 0x0f0,
+	SUNI_CPPM_RCV_CELL_CNT_MSB	= 0x0f4,
+	SUNI_CPPM_XMIT_CELL_CNT_LSB	= 0x0f8,
+	SUNI_CPPM_XMIT_CELL_CNT_MSB	= 0x0fc,
+	SUNI_RXCP_CTRL			= 0x100,
+	SUNI_RXCP_FCTRL			= 0x104,
+	SUNI_RXCP_INTR_EN_STS		= 0x108,
+	SUNI_RXCP_IDLE_PAT_H1		= 0x10c,
+	SUNI_RXCP_IDLE_PAT_H2		= 0x110,
+	SUNI_RXCP_IDLE_PAT_H3		= 0x114,
+	SUNI_RXCP_IDLE_PAT_H4		= 0x118,
+	SUNI_RXCP_IDLE_MASK_H1		= 0x11c,
+	SUNI_RXCP_IDLE_MASK_H2		= 0x120,
+	SUNI_RXCP_IDLE_MASK_H3		= 0x124,
+	SUNI_RXCP_IDLE_MASK_H4		= 0x128,
+	SUNI_RXCP_CELL_PAT_H1		= 0x12c,
+	SUNI_RXCP_CELL_PAT_H2		= 0x130,
+	SUNI_RXCP_CELL_PAT_H3		= 0x134,
+	SUNI_RXCP_CELL_PAT_H4		= 0x138,
+	SUNI_RXCP_CELL_MASK_H1		= 0x13c,
+	SUNI_RXCP_CELL_MASK_H2		= 0x140,
+	SUNI_RXCP_CELL_MASK_H3		= 0x144,
+	SUNI_RXCP_CELL_MASK_H4		= 0x148,
+	SUNI_RXCP_HCS_CS		= 0x14c,
+	SUNI_RXCP_LCD_CNT_THRESHOLD	= 0x150,
+	/* SUNI_RESERVED3 (0x57 - 0x54) */
+	SUNI_TXCP_CTRL			= 0x160,
+	SUNI_TXCP_INTR_EN_STS		= 0x164,
+	SUNI_TXCP_IDLE_PAT_H1		= 0x168,
+	SUNI_TXCP_IDLE_PAT_H2		= 0x16c,
+	SUNI_TXCP_IDLE_PAT_H3		= 0x170,
+	SUNI_TXCP_IDLE_PAT_H4		= 0x174,
+	SUNI_TXCP_IDLE_PAT_H5		= 0x178,
+	SUNI_TXCP_IDLE_PAYLOAD		= 0x17c,
+	SUNI_E3_FRM_FRAM_OPTIONS	= 0x180,
+	SUNI_E3_FRM_MAINT_OPTIONS	= 0x184,
+	SUNI_E3_FRM_FRAM_INTR_ENBL	= 0x188,
+	SUNI_E3_FRM_FRAM_INTR_IND_STAT	= 0x18c,
+	SUNI_E3_FRM_MAINT_INTR_ENBL	= 0x190,
+	SUNI_E3_FRM_MAINT_INTR_IND	= 0x194,
+	SUNI_E3_FRM_MAINT_STAT		= 0x198,
+	SUNI_RESERVED4			= 0x19c,
+	SUNI_E3_TRAN_FRAM_OPTIONS	= 0x1a0,
+	SUNI_E3_TRAN_STAT_DIAG_OPTIONS	= 0x1a4,
+	SUNI_E3_TRAN_BIP_8_ERR_MASK	= 0x1a8,
+	SUNI_E3_TRAN_MAINT_ADAPT_OPTS	= 0x1ac,
+	SUNI_TTB_CTRL			= 0x1b0,
+	SUNI_TTB_TRAIL_TRACE_ID_STAT	= 0x1b4,
+	SUNI_TTB_IND_ADDR		= 0x1b8,
+	SUNI_TTB_IND_DATA		= 0x1bc,
+	SUNI_TTB_EXP_PAYLOAD_TYPE	= 0x1c0,
+	SUNI_TTB_PAYLOAD_TYPE_CTRL_STAT	= 0x1c4,
+	/* SUNI_PAD5 (0x7f - 0x71) */
+	SUNI_MASTER_TEST		= 0x200,
+	/* SUNI_PAD6 (0xff - 0x80) */
+};
 
 #define SUNI_PM7345_T suni_pm7345_t
 #define SUNI_PM7345     0x20            /* Suni chip type */

drivers/base/class.c

@@ -47,6 +47,18 @@ static ssize_t class_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
+static const void *class_attr_namespace(struct kobject *kobj,
+					const struct attribute *attr)
+{
+	struct class_attribute *class_attr = to_class_attr(attr);
+	struct subsys_private *cp = to_subsys_private(kobj);
+	const void *ns = NULL;
+
+	if (class_attr->namespace)
+		ns = class_attr->namespace(cp->class, class_attr);
+	return ns;
+}
+
 static void class_release(struct kobject *kobj)
 {
 	struct subsys_private *cp = to_subsys_private(kobj);
@@ -72,8 +84,9 @@ static const struct kobj_ns_type_operations *class_child_ns_type(struct kobject
 }
 
 static const struct sysfs_ops class_sysfs_ops = {
-	.show	= class_attr_show,
-	.store	= class_attr_store,
+	.show	   = class_attr_show,
+	.store	   = class_attr_store,
+	.namespace = class_attr_namespace,
 };
 
 static struct kobj_type class_ktype = {

drivers/bcma/Kconfig

@@ -33,6 +33,19 @@ config BCMA_DRIVER_PCI_HOSTMODE
 	help
 	  PCI core hostmode operation (external PCI bus).
 
+config BCMA_HOST_SOC
+	bool
+	depends on BCMA_DRIVER_MIPS
+
+config BCMA_DRIVER_MIPS
+	bool "BCMA Broadcom MIPS core driver"
+	depends on BCMA && MIPS
+	help
+	  Driver for the Broadcom MIPS core attached to Broadcom specific
+	  Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
 config BCMA_DEBUG
 	bool "BCMA debugging"
 	depends on BCMA

drivers/bcma/Makefile

@@ -2,7 +2,9 @@ bcma-y					+= main.o scan.o core.o sprom.o
 bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
 bcma-y					+= driver_pci.o
 bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
+bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
 bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
 obj-$(CONFIG_BCMA)			+= bcma.o
 
 ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG

drivers/bcma/bcma_private.h

@@ -15,13 +15,29 @@ struct bcma_bus;
 /* main.c */
 int bcma_bus_register(struct bcma_bus *bus);
 void bcma_bus_unregister(struct bcma_bus *bus);
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+				   struct bcma_device *core_cc,
+				   struct bcma_device *core_mips);
 
 /* scan.c */
 int bcma_bus_scan(struct bcma_bus *bus);
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+			       struct bcma_device_id *match,
+			       struct bcma_device *core);
+void bcma_init_bus(struct bcma_bus *bus);
 
 /* sprom.c */
 int bcma_sprom_get(struct bcma_bus *bus);
 
+/* driver_chipcommon.c */
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+/* driver_chipcommon_pmu.c */
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
+
 #ifdef CONFIG_BCMA_HOST_PCI
 /* host_pci.c */
 extern int __init bcma_host_pci_init(void);

drivers/bcma/core.c

@@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
 u32 bcma_core_dma_translation(struct bcma_device *core)
 {
 	switch (core->bus->hosttype) {
+	case BCMA_HOSTTYPE_SOC:
+		return 0;
 	case BCMA_HOSTTYPE_PCI:
 		if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
 			return BCMA_DMA_TRANSLATION_DMA64_CMT;

drivers/bcma/driver_chipcommon.c

@@ -26,6 +26,9 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 	u32 leddc_on = 10;
 	u32 leddc_off = 90;
 
+	if (cc->setup_done)
+		return;
+
 	if (cc->core->id.rev >= 11)
 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
@@ -52,6 +55,8 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
 			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
 	}
+
+	cc->setup_done = true;
 }
 
 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
@@ -101,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
 }
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+{
+	unsigned int irq;
+	u32 baud_base;
+	u32 i;
+	unsigned int ccrev = cc->core->id.rev;
+	struct bcma_serial_port *ports = cc->serial_ports;
+
+	if (ccrev >= 11 && ccrev != 15) {
+		/* Fixed ALP clock */
+		baud_base = bcma_pmu_alp_clock(cc);
+		if (ccrev >= 21) {
+			/* Turn off UART clock before switching clocksource. */
+			bcma_cc_write32(cc, BCMA_CC_CORECTL,
+				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+				       & ~BCMA_CC_CORECTL_UARTCLKEN);
+		}
+		/* Set the override bit so we don't divide it */
+		bcma_cc_write32(cc, BCMA_CC_CORECTL,
+			       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+			       | BCMA_CC_CORECTL_UARTCLK0);
+		if (ccrev >= 21) {
+			/* Re-enable the UART clock. */
+			bcma_cc_write32(cc, BCMA_CC_CORECTL,
+				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+				       | BCMA_CC_CORECTL_UARTCLKEN);
+		}
+	} else {
+		pr_err("serial not supported on this device ccrev: 0x%x\n",
+		       ccrev);
+		return;
+	}
+
+	irq = bcma_core_mips_irq(cc->core);
+
+	/* Determine the registers of the UARTs */
+	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+	for (i = 0; i < cc->nr_serial_ports; i++) {
+		ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
+				(i * 256);
+		ports[i].irq = irq;
+		ports[i].baud_base = baud_base;
+		ports[i].reg_shift = 0;
+	}
+}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */

drivers/bcma/driver_chipcommon_pmu.c

@@ -11,20 +11,47 @@
 #include "bcma_private.h"
 #include <linux/bcma/bcma.h>
 
-static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
-					u32 offset, u32 mask, u32 set)
+static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
 {
-	u32 value;
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+}
 
-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+{
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);
+
+void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+			     u32 set)
+{
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+	bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);
+
+void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+				 u32 offset, u32 mask, u32 set)
+{
 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
-	value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
-	value &= mask;
-	value |= set;
-	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);
+
+void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+				u32 set)
+{
+	bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
+	bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
 
 static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
 {
@@ -83,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
 	}
 }
 
+/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 val;
+
+	val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL);
+	if (enable) {
+		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
+		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
+			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+	} else {
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+	}
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
+}
+
 void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
@@ -92,7 +137,7 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
 		break;
 	case 0x4331:
-		pr_err("Enabling Ext PA lines not implemented\n");
+		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
 		break;
 	case 43224:
 		if (bus->chipinfo.rev == 0) {
@@ -136,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *cc)
 	bcma_pmu_swreg_init(cc);
 	bcma_pmu_workarounds(cc);
 }
+
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4716:
+	case 0x4748:
+	case 47162:
+	case 0x4313:
+	case 0x5357:
+	case 0x4749:
+	case 53572:
+		/* always 20Mhz */
+		return 20000 * 1000;
+	case 0x5356:
+	case 0x5300:
+		/* always 25Mhz */
+		return 25000 * 1000;
+	default:
+		pr_warn("No ALP clock specified for %04X device, "
+			"pmu rev. %d, using default %d Hz\n",
+			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+	}
+	return BCMA_CC_PMU_ALP_CLOCK;
+}
+
+/* Find the output of the "m" pll divider given pll controls that start with
+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
+ */
+static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+{
+	u32 tmp, div, ndiv, p1, p2, fc;
+	struct bcma_bus *bus = cc->core->bus;
+
+	BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));
+
+	BUG_ON(!m || m > 4);
+
+	if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
+		/* Detect failure in clock setting */
+		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+		if (tmp & 0x40000)
+			return 133 * 1000000;
+	}
+
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
+	p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
+	p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;
+
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
+	div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
+		BCMA_CC_PPL_MDIV_MASK;
+
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
+	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
+
+	/* Do calculation in Mhz */
+	fc = bcma_pmu_alp_clock(cc) / 1000000;
+	fc = (p1 * ndiv * fc) / p2;
+
+	/* Return clock in Hertz */
+	return (fc / div) * 1000000;
+}
+
+/* query bus clock frequency for PMU-enabled chipcommon */
+u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4716:
+	case 0x4748:
+	case 47162:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 0x5356:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 0x5357:
+	case 0x4749:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 0x5300:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 53572:
+		return 75000000;
+	default:
+		pr_warn("No backplane clock specified for %04X device, "
+			"pmu rev. %d, using default %d Hz\n",
+			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
+	}
+	return BCMA_CC_PMU_HT_CLOCK;
+}
+
+/* query cpu clock frequency for PMU-enabled chipcommon */
+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	if (bus->chipinfo.id == 53572)
+		return 300000000;
+
+	if (cc->pmu.rev >= 5) {
+		u32 pll;
+		switch (bus->chipinfo.id) {
+		case 0x5356:
+			pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
+			break;
+		case 0x5357:
+		case 0x4749:
+			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
+			break;
+		default:
+			pll = BCMA_CC_PMU4716_MAINPLL_PLL0;
+			break;
+		}
+
+		/* TODO: if (bus->chipinfo.id == 0x5300)
+		  return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
+		return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+	}
+
+	return bcma_pmu_get_clockcontrol(cc);
+}

drivers/bcma/driver_mips.c

@@ -0,0 +1,256 @@
+/*
+ * Broadcom specific AMBA
+ * Broadcom MIPS32 74K core driver
+ *
+ * Copyright 2009, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
+ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+
+/* The 47162a0 hangs when reading MIPS DMP registers registers */
+static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+{
+	return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
+	       dev->id.id == BCMA_CORE_MIPS_74K;
+}
+
+/* The 5357b0 hangs when reading USB20H DMP registers */
+static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
+{
+	return (dev->bus->chipinfo.id == 0x5357 ||
+		dev->bus->chipinfo.id == 0x4749) &&
+	       dev->bus->chipinfo.pkg == 11 &&
+	       dev->id.id == BCMA_CORE_USB20_HOST;
+}
+
+static inline u32 mips_read32(struct bcma_drv_mips *mcore,
+			      u16 offset)
+{
+	return bcma_read32(mcore->core, offset);
+}
+
+static inline void mips_write32(struct bcma_drv_mips *mcore,
+				u16 offset,
+				u32 value)
+{
+	bcma_write32(mcore->core, offset, value);
+}
+
+static const u32 ipsflag_irq_mask[] = {
+	0,
+	BCMA_MIPS_IPSFLAG_IRQ1,
+	BCMA_MIPS_IPSFLAG_IRQ2,
+	BCMA_MIPS_IPSFLAG_IRQ3,
+	BCMA_MIPS_IPSFLAG_IRQ4,
+};
+
+static const u32 ipsflag_irq_shift[] = {
+	0,
+	BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
+	BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
+	BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
+	BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
+};
+
+static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
+{
+	u32 flag;
+
+	if (bcma_core_mips_bcm47162a0_quirk(dev))
+		return dev->core_index;
+	if (bcma_core_mips_bcm5357b0_quirk(dev))
+		return dev->core_index;
+	flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+	return flag & 0x1F;
+}
+
+/* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
+ */
+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+{
+	struct bcma_device *mdev = dev->bus->drv_mips.core;
+	u32 irqflag;
+	unsigned int irq;
+
+	irqflag = bcma_core_mips_irqflag(dev);
+
+	for (irq = 1; irq <= 4; irq++)
+		if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+		    (1 << irqflag))
+			return irq;
+
+	return 0;
+}
+EXPORT_SYMBOL(bcma_core_mips_irq);
+
+static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+{
+	unsigned int oldirq = bcma_core_mips_irq(dev);
+	struct bcma_bus *bus = dev->bus;
+	struct bcma_device *mdev = bus->drv_mips.core;
+	u32 irqflag;
+
+	irqflag = bcma_core_mips_irqflag(dev);
+	BUG_ON(oldirq == 6);
+
+	dev->irq = irq + 2;
+
+	/* clear the old irq */
+	if (oldirq == 0)
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
+			    ~(1 << irqflag));
+	else
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+
+	/* assign the new one */
+	if (irq == 0) {
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+			    (1 << irqflag));
+	} else {
+		u32 oldirqflag = bcma_read32(mdev,
+					     BCMA_MIPS_MIPS74K_INTMASK(irq));
+		if (oldirqflag) {
+			struct bcma_device *core;
+
+			/* backplane irq line is in use, find out who uses
+			 * it and set user to irq 0
+			 */
+			list_for_each_entry_reverse(core, &bus->cores, list) {
+				if ((1 << bcma_core_mips_irqflag(core)) ==
+				    oldirqflag) {
+					bcma_core_mips_set_irq(core, 0);
+					break;
+				}
+			}
+		}
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
+			     1 << irqflag);
+	}
+
+	pr_info("set_irq: core 0x%04x, irq %d => %d\n",
+		dev->id.id, oldirq + 2, irq + 2);
+}
+
+static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
+{
+	int i;
+	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+	printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+	for (i = 0; i <= 6; i++)
+		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+	printk("\n");
+}
+
+static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry_reverse(core, &bus->cores, list) {
+		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
+	}
+}
+
+u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus = mcore->core->bus;
+
+	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
+		return bcma_pmu_get_clockcpu(&bus->drv_cc);
+
+	pr_err("No PMU available, need this to get the cpu clock\n");
+	return 0;
+}
+EXPORT_SYMBOL(bcma_cpu_clock);
+
+static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus = mcore->core->bus;
+
+	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+	case BCMA_CC_FLASHT_STSER:
+	case BCMA_CC_FLASHT_ATSER:
+		pr_err("Serial flash not supported.\n");
+		break;
+	case BCMA_CC_FLASHT_PARA:
+		pr_info("found parallel flash.\n");
+		bus->drv_cc.pflash.window = 0x1c000000;
+		bus->drv_cc.pflash.window_size = 0x02000000;
+
+		if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+		     BCMA_CC_FLASH_CFG_DS) == 0)
+			bus->drv_cc.pflash.buswidth = 1;
+		else
+			bus->drv_cc.pflash.buswidth = 2;
+		break;
+	default:
+		pr_err("flash not supported.\n");
+	}
+}
+
+void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus;
+	struct bcma_device *core;
+	bus = mcore->core->bus;
+
+	pr_info("Initializing MIPS core...\n");
+
+	if (!mcore->setup_done)
+		mcore->assigned_irqs = 1;
+
+	/* Assign IRQs to all cores on the bus */
+	list_for_each_entry_reverse(core, &bus->cores, list) {
+		int mips_irq;
+		if (core->irq)
+			continue;
+
+		mips_irq = bcma_core_mips_irq(core);
+		if (mips_irq > 4)
+			core->irq = 0;
+		else
+			core->irq = mips_irq + 2;
+		if (core->irq > 5)
+			continue;
+		switch (core->id.id) {
+		case BCMA_CORE_PCI:
+		case BCMA_CORE_PCIE:
+		case BCMA_CORE_ETHERNET:
+		case BCMA_CORE_ETHERNET_GBIT:
+		case BCMA_CORE_MAC_GBIT:
+		case BCMA_CORE_80211:
+		case BCMA_CORE_USB20_HOST:
+			/* These devices get their own IRQ line if available,
+			 * the rest goes on IRQ0
+			 */
+			if (mcore->assigned_irqs <= 4)
+				bcma_core_mips_set_irq(core,
+						       mcore->assigned_irqs++);
+			break;
+		}
+	}
+	pr_info("IRQ reconfiguration done\n");
+	bcma_core_mips_dump_irq(bus);
+
+	if (mcore->setup_done)
+		return;
+
+	bcma_chipco_serial_init(&bus->drv_cc);
+	bcma_core_mips_flash_detect(mcore);
+	mcore->setup_done = true;
+}

drivers/bcma/driver_pci.c

@@ -173,7 +173,7 @@ static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
 		return false;
 
 #ifdef CONFIG_SSB_DRIVER_PCICORE
-	if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+	if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI)
 		return false;
 #endif /* CONFIG_SSB_DRIVER_PCICORE */
 
@@ -189,6 +189,9 @@ static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
 
 void bcma_core_pci_init(struct bcma_drv_pci *pc)
 {
+	if (pc->setup_done)
+		return;
+
 	if (bcma_core_pci_is_in_hostmode(pc)) {
 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
 		bcma_core_pci_hostmode_init(pc);
@@ -198,6 +201,8 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc)
 	} else {
 		bcma_core_pci_clientmode_init(pc);
 	}
+
+	pc->setup_done = true;
 }
 
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
@@ -205,7 +210,14 @@ int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
 {
 	struct pci_dev *pdev = pc->core->bus->host_pci;
 	u32 coremask, tmp;
-	int err;
+	int err = 0;
+
+	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+		/* This bcma device is not on a PCI host-bus. So the IRQs are
+		 * not routed through the PCI core.
+		 * So we must not enable routing through the PCI core. */
+		goto out;
+	}
 
 	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
 	if (err)

drivers/bcma/host_soc.c

@@ -0,0 +1,183 @@
+/*
+ * Broadcom specific AMBA
+ * System on Chip (SoC) Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include "scan.h"
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
+
+static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
+{
+	return readb(core->io_addr + offset);
+}
+
+static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
+{
+	return readw(core->io_addr + offset);
+}
+
+static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
+{
+	return readl(core->io_addr + offset);
+}
+
+static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
+				 u8 value)
+{
+	writeb(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
+				 u16 value)
+{
+	writew(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
+				 u32 value)
+{
+	writel(value, core->io_addr + offset);
+}
+
+#ifdef CONFIG_BCMA_BLOCKIO
+static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
+				     size_t count, u16 offset, u8 reg_width)
+{
+	void __iomem *addr = core->io_addr + offset;
+
+	switch (reg_width) {
+	case sizeof(u8): {
+		u8 *buf = buffer;
+
+		while (count) {
+			*buf = __raw_readb(addr);
+			buf++;
+			count--;
+		}
+		break;
+	}
+	case sizeof(u16): {
+		__le16 *buf = buffer;
+
+		WARN_ON(count & 1);
+		while (count) {
+			*buf = (__force __le16)__raw_readw(addr);
+			buf++;
+			count -= 2;
+		}
+		break;
+	}
+	case sizeof(u32): {
+		__le32 *buf = buffer;
+
+		WARN_ON(count & 3);
+		while (count) {
+			*buf = (__force __le32)__raw_readl(addr);
+			buf++;
+			count -= 4;
+		}
+		break;
+	}
+	default:
+		WARN_ON(1);
+	}
+}
+
+static void bcma_host_soc_block_write(struct bcma_device *core,
+				      const void *buffer,
+				      size_t count, u16 offset, u8 reg_width)
+{
+	void __iomem *addr = core->io_addr + offset;
+
+	switch (reg_width) {
+	case sizeof(u8): {
+		const u8 *buf = buffer;
+
+		while (count) {
+			__raw_writeb(*buf, addr);
+			buf++;
+			count--;
+		}
+		break;
+	}
+	case sizeof(u16): {
+		const __le16 *buf = buffer;
+
+		WARN_ON(count & 1);
+		while (count) {
+			__raw_writew((__force u16)(*buf), addr);
+			buf++;
+			count -= 2;
+		}
+		break;
+	}
+	case sizeof(u32): {
+		const __le32 *buf = buffer;
+
+		WARN_ON(count & 3);
+		while (count) {
+			__raw_writel((__force u32)(*buf), addr);
+			buf++;
+			count -= 4;
+		}
+		break;
+	}
+	default:
+		WARN_ON(1);
+	}
+}
+#endif /* CONFIG_BCMA_BLOCKIO */
+
+static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
+{
+	return readl(core->io_wrap + offset);
+}
+
+static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
+				  u32 value)
+{
+	writel(value, core->io_wrap + offset);
+}
+
+const struct bcma_host_ops bcma_host_soc_ops = {
+	.read8		= bcma_host_soc_read8,
+	.read16		= bcma_host_soc_read16,
+	.read32		= bcma_host_soc_read32,
+	.write8		= bcma_host_soc_write8,
+	.write16	= bcma_host_soc_write16,
+	.write32	= bcma_host_soc_write32,
+#ifdef CONFIG_BCMA_BLOCKIO
+	.block_read	= bcma_host_soc_block_read,
+	.block_write	= bcma_host_soc_block_write,
+#endif
+	.aread32	= bcma_host_soc_aread32,
+	.awrite32	= bcma_host_soc_awrite32,
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc)
+{
+	struct bcma_bus *bus = &soc->bus;
+	int err;
+
+	/* iomap only first core. We have to read some register on this core
+	 * to scan the bus.
+	 */
+	bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
+	if (!bus->mmio)
+		return -ENOMEM;
+
+	/* Host specific */
+	bus->hosttype = BCMA_HOSTTYPE_SOC;
+	bus->ops = &bcma_host_soc_ops;
+
+	/* Register */
+	err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
+	if (err)
+		iounmap(bus->mmio);
+
+	return err;
+}

drivers/bcma/main.c

@@ -68,6 +68,10 @@ static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
 static void bcma_release_core_dev(struct device *dev)
 {
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	if (core->io_addr)
+		iounmap(core->io_addr);
+	if (core->io_wrap)
+		iounmap(core->io_wrap);
 	kfree(core);
 }
 
@@ -82,6 +86,7 @@ static int bcma_register_cores(struct bcma_bus *bus)
 		case BCMA_CORE_CHIPCOMMON:
 		case BCMA_CORE_PCI:
 		case BCMA_CORE_PCIE:
+		case BCMA_CORE_MIPS_74K:
 			continue;
 		}
 
@@ -95,7 +100,10 @@ static int bcma_register_cores(struct bcma_bus *bus)
 			core->dma_dev = &bus->host_pci->dev;
 			core->irq = bus->host_pci->irq;
 			break;
-		case BCMA_HOSTTYPE_NONE:
+		case BCMA_HOSTTYPE_SOC:
+			core->dev.dma_mask = &core->dev.coherent_dma_mask;
+			core->dma_dev = &core->dev;
+			break;
 		case BCMA_HOSTTYPE_SDIO:
 			break;
 		}
@@ -142,6 +150,13 @@ int bcma_bus_register(struct bcma_bus *bus)
 		bcma_core_chipcommon_init(&bus->drv_cc);
 	}
 
+	/* Init MIPS core */
+	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+	if (core) {
+		bus->drv_mips.core = core;
+		bcma_core_mips_init(&bus->drv_mips);
+	}
+
 	/* Init PCIE core */
 	core = bcma_find_core(bus, BCMA_CORE_PCIE);
 	if (core) {
@@ -171,6 +186,59 @@ void bcma_bus_unregister(struct bcma_bus *bus)
 	bcma_unregister_cores(bus);
 }
 
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+				   struct bcma_device *core_cc,
+				   struct bcma_device *core_mips)
+{
+	int err;
+	struct bcma_device *core;
+	struct bcma_device_id match;
+
+	bcma_init_bus(bus);
+
+	match.manuf = BCMA_MANUF_BCM;
+	match.id = BCMA_CORE_CHIPCOMMON;
+	match.class = BCMA_CL_SIM;
+	match.rev = BCMA_ANY_REV;
+
+	/* Scan for chip common core */
+	err = bcma_bus_scan_early(bus, &match, core_cc);
+	if (err) {
+		pr_err("Failed to scan for common core: %d\n", err);
+		return -1;
+	}
+
+	match.manuf = BCMA_MANUF_MIPS;
+	match.id = BCMA_CORE_MIPS_74K;
+	match.class = BCMA_CL_SIM;
+	match.rev = BCMA_ANY_REV;
+
+	/* Scan for mips core */
+	err = bcma_bus_scan_early(bus, &match, core_mips);
+	if (err) {
+		pr_err("Failed to scan for mips core: %d\n", err);
+		return -1;
+	}
+
+	/* Init CC core */
+	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_init(&bus->drv_cc);
+	}
+
+	/* Init MIPS core */
+	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+	if (core) {
+		bus->drv_mips.core = core;
+		bcma_core_mips_init(&bus->drv_mips);
+	}
+
+	pr_info("Early bus registered\n");
+
+	return 0;
+}
+
 int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
 {
 	drv->drv.name = drv->name;

drivers/bcma/scan.c

@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
 	return addrl;
 }
 
-int bcma_bus_scan(struct bcma_bus *bus)
+static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
+						   u16 index)
 {
-	u32 erombase;
-	u32 __iomem *eromptr, *eromend;
+	struct bcma_device *core;
 
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->core_index == index)
+			return core;
+	}
+	return NULL;
+}
+
+static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+			      struct bcma_device_id *match, int core_num,
+			      struct bcma_device *core)
+{
+	s32 tmp;
+	u8 i, j;
 	s32 cia, cib;
 	u8 ports[2], wrappers[2];
 
+	/* get CIs */
+	cia = bcma_erom_get_ci(bus, eromptr);
+	if (cia < 0) {
+		bcma_erom_push_ent(eromptr);
+		if (bcma_erom_is_end(bus, eromptr))
+			return -ESPIPE;
+		return -EILSEQ;
+	}
+	cib = bcma_erom_get_ci(bus, eromptr);
+	if (cib < 0)
+		return -EILSEQ;
+
+	/* parse CIs */
+	core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+	core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+	core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+	ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+	ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+	wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+	wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+	core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+	if (((core->id.manuf == BCMA_MANUF_ARM) &&
+	     (core->id.id == 0xFFF)) ||
+	    (ports[1] == 0)) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENXIO;
+	}
+
+	/* check if component is a core at all */
+	if (wrappers[0] + wrappers[1] == 0) {
+		/* we could save addrl of the router
+		if (cid == BCMA_CORE_OOB_ROUTER)
+		 */
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENXIO;
+	}
+
+	if (bcma_erom_is_bridge(bus, eromptr)) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENXIO;
+	}
+
+	if (bcma_find_core_by_index(bus, core_num)) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENODEV;
+	}
+
+	if (match && ((match->manuf != BCMA_ANY_MANUF &&
+	      match->manuf != core->id.manuf) ||
+	     (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
+	     (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
+	     (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
+	    )) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENODEV;
+	}
+
+	/* get & parse master ports */
+	for (i = 0; i < ports[0]; i++) {
+		s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
+		if (mst_port_d < 0)
+			return -EILSEQ;
+	}
+
+	/* get & parse slave ports */
+	for (i = 0; i < ports[1]; i++) {
+		for (j = 0; ; j++) {
+			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+				SCAN_ADDR_TYPE_SLAVE, i);
+			if (tmp < 0) {
+				/* no more entries for port _i_ */
+				/* pr_debug("erom: slave port %d "
+				 * "has %d descriptors\n", i, j); */
+				break;
+			} else {
+				if (i == 0 && j == 0)
+					core->addr = tmp;
+			}
+		}
+	}
+
+	/* get & parse master wrappers */
+	for (i = 0; i < wrappers[0]; i++) {
+		for (j = 0; ; j++) {
+			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+				SCAN_ADDR_TYPE_MWRAP, i);
+			if (tmp < 0) {
+				/* no more entries for port _i_ */
+				/* pr_debug("erom: master wrapper %d "
+				 * "has %d descriptors\n", i, j); */
+				break;
+			} else {
+				if (i == 0 && j == 0)
+					core->wrap = tmp;
+			}
+		}
+	}
+
+	/* get & parse slave wrappers */
+	for (i = 0; i < wrappers[1]; i++) {
+		u8 hack = (ports[1] == 1) ? 0 : 1;
+		for (j = 0; ; j++) {
+			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+				SCAN_ADDR_TYPE_SWRAP, i + hack);
+			if (tmp < 0) {
+				/* no more entries for port _i_ */
+				/* pr_debug("erom: master wrapper %d "
+				 * has %d descriptors\n", i, j); */
+				break;
+			} else {
+				if (wrappers[0] == 0 && !i && !j)
+					core->wrap = tmp;
+			}
+		}
+	}
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE);
+		if (!core->io_addr)
+			return -ENOMEM;
+		core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE);
+		if (!core->io_wrap) {
+			iounmap(core->io_addr);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+void bcma_init_bus(struct bcma_bus *bus)
+{
 	s32 tmp;
-	u8 i, j;
 
-	int err;
+	if (bus->init_done)
+		return;
 
 	INIT_LIST_HEAD(&bus->cores);
 	bus->nr_cores = 0;
@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus)
 	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
 	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
 	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+	bus->init_done = true;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
+
+	int err, core_num = 0;
+
+	bcma_init_bus(bus);
 
 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
-	eromptr = bus->mmio;
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+		if (!eromptr)
+			return -ENOMEM;
+	} else {
+		eromptr = bus->mmio;
+	}
+
 	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
 
 	bcma_scan_switch_core(bus, erombase);
@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus)
 		INIT_LIST_HEAD(&core->list);
 		core->bus = bus;
 
-		/* get CIs */
-		cia = bcma_erom_get_ci(bus, &eromptr);
-		if (cia < 0) {
-			bcma_erom_push_ent(&eromptr);
-			if (bcma_erom_is_end(bus, &eromptr))
-				break;
-			err= -EILSEQ;
-			goto out;
-		}
-		cib = bcma_erom_get_ci(bus, &eromptr);
-		if (cib < 0) {
-			err= -EILSEQ;
-			goto out;
-		}
-
-		/* parse CIs */
-		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
-		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
-		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
-		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
-		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
-		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
-		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
-		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
-
-		if (((core->id.manuf == BCMA_MANUF_ARM) &&
-		     (core->id.id == 0xFFF)) ||
-		    (ports[1] == 0)) {
-			bcma_erom_skip_component(bus, &eromptr);
+		err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
+		if (err == -ENODEV) {
+			core_num++;
 			continue;
-		}
-
-		/* check if component is a core at all */
-		if (wrappers[0] + wrappers[1] == 0) {
-			/* we could save addrl of the router
-			if (cid == BCMA_CORE_OOB_ROUTER)
-			 */
-			bcma_erom_skip_component(bus, &eromptr);
+		} else if (err == -ENXIO)
 			continue;
-		}
+		else if (err == -ESPIPE)
+			break;
+		else if (err < 0)
+			return err;
 
-		if (bcma_erom_is_bridge(bus, &eromptr)) {
-			bcma_erom_skip_component(bus, &eromptr);
-			continue;
-		}
+		core->core_index = core_num++;
+		bus->nr_cores++;
 
-		/* get & parse master ports */
-		for (i = 0; i < ports[0]; i++) {
-			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
-			if (mst_port_d < 0) {
-				err= -EILSEQ;
-				goto out;
-			}
-		}
+		pr_info("Core %d found: %s "
+			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			core->core_index, bcma_device_name(&core->id),
+			core->id.manuf, core->id.id, core->id.rev,
+			core->id.class);
 
-		/* get & parse slave ports */
-		for (i = 0; i < ports[1]; i++) {
-			for (j = 0; ; j++) {
-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
-					SCAN_ADDR_TYPE_SLAVE, i);
-				if (tmp < 0) {
-					/* no more entries for port _i_ */
-					/* pr_debug("erom: slave port %d "
-					 * "has %d descriptors\n", i, j); */
-					break;
-				} else {
-					if (i == 0 && j == 0)
-						core->addr = tmp;
-				}
-			}
-		}
+		list_add(&core->list, &bus->cores);
+	}
 
-		/* get & parse master wrappers */
-		for (i = 0; i < wrappers[0]; i++) {
-			for (j = 0; ; j++) {
-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
-					SCAN_ADDR_TYPE_MWRAP, i);
-				if (tmp < 0) {
-					/* no more entries for port _i_ */
-					/* pr_debug("erom: master wrapper %d "
-					 * "has %d descriptors\n", i, j); */
-					break;
-				} else {
-					if (i == 0 && j == 0)
-						core->wrap = tmp;
-				}
-			}
-		}
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+		iounmap(eromptr);
 
-		/* get & parse slave wrappers */
-		for (i = 0; i < wrappers[1]; i++) {
-			u8 hack = (ports[1] == 1) ? 0 : 1;
-			for (j = 0; ; j++) {
-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
-					SCAN_ADDR_TYPE_SWRAP, i + hack);
-				if (tmp < 0) {
-					/* no more entries for port _i_ */
-					/* pr_debug("erom: master wrapper %d "
-					 * has %d descriptors\n", i, j); */
-					break;
-				} else {
-					if (wrappers[0] == 0 && !i && !j)
-						core->wrap = tmp;
-				}
-			}
-		}
+	return 0;
+}
+
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+			       struct bcma_device_id *match,
+			       struct bcma_device *core)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
+
+	int err = -ENODEV;
+	int core_num = 0;
+
+	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+		if (!eromptr)
+			return -ENOMEM;
+	} else {
+		eromptr = bus->mmio;
+	}
+
+	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+	bcma_scan_switch_core(bus, erombase);
+
+	while (eromptr < eromend) {
+		memset(core, 0, sizeof(*core));
+		INIT_LIST_HEAD(&core->list);
+		core->bus = bus;
 
+		err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
+		if (err == -ENODEV) {
+			core_num++;
+			continue;
+		} else if (err == -ENXIO)
+			continue;
+		else if (err == -ESPIPE)
+			break;
+		else if (err < 0)
+			return err;
+
+		core->core_index = core_num++;
+		bus->nr_cores++;
 		pr_info("Core %d found: %s "
 			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
-			bus->nr_cores, bcma_device_name(&core->id),
+			core->core_index, bcma_device_name(&core->id),
 			core->id.manuf, core->id.id, core->id.rev,
 			core->id.class);
 
-		core->core_index = bus->nr_cores++;
 		list_add(&core->list, &bus->cores);
-		continue;
-out:
-		return err;
+		err = 0;
+		break;
 	}
 
-	return 0;
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+		iounmap(eromptr);
+
+	return err;
 }

drivers/bcma/sprom.c

@@ -133,6 +133,15 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 		v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
 		*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
 	}
+
+	bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+
+	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+
+	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
 }
 
 int bcma_sprom_get(struct bcma_bus *bus)
@@ -152,6 +161,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
 	if (!sprom)
 		return -ENOMEM;
 
+	if (bus->chipinfo.id == 0x4331)
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
 	/* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
 	 * According to brcm80211 this applies to cards with PCIe rev >= 6
 	 * TODO: understand this condition and use it */
@@ -159,6 +171,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
 		BCMA_CC_SPROM_PCIE6;
 	bcma_sprom_read(bus, offset, sprom);
 
+	if (bus->chipinfo.id == 0x4331)
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
 	err = bcma_sprom_valid(sprom);
 	if (err)
 		goto out;

drivers/bluetooth/btusb.c

@@ -60,6 +60,9 @@ static struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
+	/* Broadcom SoftSailing reporting vendor specific */
+	{ USB_DEVICE(0x05ac, 0x21e1) },
+
 	/* Apple MacBookPro 7,1 */
 	{ USB_DEVICE(0x05ac, 0x8213) },
 
@@ -708,8 +711,7 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_ACLDATA_PKT:
-		if (!data->bulk_tx_ep || (hdev->conn_hash.acl_num < 1 &&
-						hdev->conn_hash.le_num < 1))
+		if (!data->bulk_tx_ep)
 			return -ENODEV;
 
 		urb = usb_alloc_urb(0, GFP_ATOMIC);

drivers/connector/cn_proc.c

@@ -205,6 +205,32 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id)
 	cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
 }
 
+void proc_comm_connector(struct task_struct *task)
+{
+	struct cn_msg *msg;
+	struct proc_event *ev;
+	struct timespec ts;
+	__u8 buffer[CN_PROC_MSG_SIZE];
+
+	if (atomic_read(&proc_event_num_listeners) < 1)
+		return;
+
+	msg = (struct cn_msg *)buffer;
+	ev = (struct proc_event *)msg->data;
+	get_seq(&msg->seq, &ev->cpu);
+	ktime_get_ts(&ts); /* get high res monotonic timestamp */
+	put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
+	ev->what = PROC_EVENT_COMM;
+	ev->event_data.comm.process_pid  = task->pid;
+	ev->event_data.comm.process_tgid = task->tgid;
+	get_task_comm(ev->event_data.comm.comm, task);
+
+	memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id));
+	msg->ack = 0; /* not used */
+	msg->len = sizeof(*ev);
+	cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+}
+
 void proc_exit_connector(struct task_struct *task)
 {
 	struct cn_msg *msg;

drivers/infiniband/hw/amso1100/c2.c

@@ -800,13 +800,10 @@ static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	/* Loop thru additional data fragments and queue them */
 	if (skb_shinfo(skb)->nr_frags) {
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-			maplen = frag->size;
-			mapaddr =
-			    pci_map_page(c2dev->pcidev, frag->page,
-					 frag->page_offset, maplen,
-					 PCI_DMA_TODEVICE);
-
+			const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			maplen = skb_frag_size(frag);
+			mapaddr = skb_frag_dma_map(&c2dev->pcidev->dev, frag,
+						   0, maplen, DMA_TO_DEVICE);
 			elem = elem->next;
 			elem->skb = NULL;
 			elem->mapaddr = mapaddr;

drivers/infiniband/hw/cxgb3/Makefile

@@ -1,4 +1,4 @@
-ccflags-y := -Idrivers/net/cxgb3
+ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb3
 
 obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o
 

drivers/infiniband/hw/cxgb4/Makefile

@@ -1,4 +1,4 @@
-ccflags-y := -Idrivers/net/cxgb4
+ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
 
 obj-$(CONFIG_INFINIBAND_CXGB4) += iw_cxgb4.o
 

drivers/infiniband/hw/mlx4/Kconfig

@@ -1,6 +1,7 @@
 config MLX4_INFINIBAND
 	tristate "Mellanox ConnectX HCA support"
-	depends on NETDEVICES && NETDEV_10000 && PCI
+	depends on NETDEVICES && ETHERNET && PCI
+	select NET_VENDOR_MELLANOX
 	select MLX4_CORE
 	---help---
 	  This driver provides low-level InfiniBand support for

drivers/infiniband/hw/nes/nes_nic.c

@@ -441,13 +441,13 @@ static int nes_nic_send(struct sk_buff *skb, struct net_device *netdev)
 		nesnic->tx_skb[nesnic->sq_head] = skb;
 		for (skb_fragment_index = 0; skb_fragment_index < skb_shinfo(skb)->nr_frags;
 				skb_fragment_index++) {
-			bus_address = pci_map_page( nesdev->pcidev,
-					skb_shinfo(skb)->frags[skb_fragment_index].page,
-					skb_shinfo(skb)->frags[skb_fragment_index].page_offset,
-					skb_shinfo(skb)->frags[skb_fragment_index].size,
-					PCI_DMA_TODEVICE);
+			skb_frag_t *frag =
+				&skb_shinfo(skb)->frags[skb_fragment_index];
+			bus_address = skb_frag_dma_map(&nesdev->pcidev->dev,
+						       frag, 0, skb_frag_size(frag),
+						       DMA_TO_DEVICE);
 			wqe_fragment_length[wqe_fragment_index] =
-					cpu_to_le16(skb_shinfo(skb)->frags[skb_fragment_index].size);
+					cpu_to_le16(skb_frag_size(&skb_shinfo(skb)->frags[skb_fragment_index]));
 			set_wqe_64bit_value(nic_sqe->wqe_words, NES_NIC_SQ_WQE_FRAG0_LOW_IDX+(2*wqe_fragment_index),
 				bus_address);
 			wqe_fragment_index++;
@@ -561,11 +561,12 @@ tso_sq_no_longer_full:
 			/* Map all the buffers */
 			for (tso_frag_count=0; tso_frag_count < skb_shinfo(skb)->nr_frags;
 					tso_frag_count++) {
-				tso_bus_address[tso_frag_count] = pci_map_page( nesdev->pcidev,
-						skb_shinfo(skb)->frags[tso_frag_count].page,
-						skb_shinfo(skb)->frags[tso_frag_count].page_offset,
-						skb_shinfo(skb)->frags[tso_frag_count].size,
-						PCI_DMA_TODEVICE);
+				skb_frag_t *frag =
+					&skb_shinfo(skb)->frags[tso_frag_count];
+				tso_bus_address[tso_frag_count] =
+					skb_frag_dma_map(&nesdev->pcidev->dev,
+							 frag, 0, skb_frag_size(frag),
+							 DMA_TO_DEVICE);
 			}
 
 			tso_frag_index = 0;
@@ -636,11 +637,11 @@ tso_sq_no_longer_full:
 				}
 				while (wqe_fragment_index < 5) {
 					wqe_fragment_length[wqe_fragment_index] =
-							cpu_to_le16(skb_shinfo(skb)->frags[tso_frag_index].size);
+							cpu_to_le16(skb_frag_size(&skb_shinfo(skb)->frags[tso_frag_index]));
 					set_wqe_64bit_value(nic_sqe->wqe_words, NES_NIC_SQ_WQE_FRAG0_LOW_IDX+(2*wqe_fragment_index),
 						(u64)tso_bus_address[tso_frag_index]);
 					wqe_fragment_index++;
-					tso_wqe_length += skb_shinfo(skb)->frags[tso_frag_index++].size;
+					tso_wqe_length += skb_frag_size(&skb_shinfo(skb)->frags[tso_frag_index++]);
 					if (wqe_fragment_index < 5)
 						wqe_fragment_length[wqe_fragment_index] = 0;
 					if (tso_frag_index == tso_frag_count)
@@ -1638,7 +1639,7 @@ static const struct net_device_ops nes_netdev_ops = {
 	.ndo_get_stats		= nes_netdev_get_stats,
 	.ndo_tx_timeout		= nes_netdev_tx_timeout,
 	.ndo_set_mac_address	= nes_netdev_set_mac_address,
-	.ndo_set_multicast_list = nes_netdev_set_multicast_list,
+	.ndo_set_rx_mode	= nes_netdev_set_multicast_list,
 	.ndo_change_mtu		= nes_netdev_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_fix_features	= nes_fix_features,

drivers/infiniband/ulp/ipoib/ipoib_cm.c

@@ -169,7 +169,7 @@ static struct sk_buff *ipoib_cm_alloc_rx_skb(struct net_device *dev,
 			goto partial_error;
 		skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
 
-		mapping[i + 1] = ib_dma_map_page(priv->ca, skb_shinfo(skb)->frags[i].page,
+		mapping[i + 1] = ib_dma_map_page(priv->ca, page,
 						 0, PAGE_SIZE, DMA_FROM_DEVICE);
 		if (unlikely(ib_dma_mapping_error(priv->ca, mapping[i + 1])))
 			goto partial_error;
@@ -537,12 +537,13 @@ static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
 
 		if (length == 0) {
 			/* don't need this page */
-			skb_fill_page_desc(toskb, i, frag->page, 0, PAGE_SIZE);
+			skb_fill_page_desc(toskb, i, skb_frag_page(frag),
+					   0, PAGE_SIZE);
 			--skb_shinfo(skb)->nr_frags;
 		} else {
 			size = min(length, (unsigned) PAGE_SIZE);
 
-			frag->size = size;
+			skb_frag_size_set(frag, size);
 			skb->data_len += size;
 			skb->truesize += size;
 			skb->len += size;

drivers/infiniband/ulp/ipoib/ipoib_ib.c

@@ -117,7 +117,7 @@ static void ipoib_ud_skb_put_frags(struct ipoib_dev_priv *priv,
 
 		size = length - IPOIB_UD_HEAD_SIZE;
 
-		frag->size     = size;
+		skb_frag_size_set(frag, size);
 		skb->data_len += size;
 		skb->truesize += size;
 	} else
@@ -182,7 +182,7 @@ static struct sk_buff *ipoib_alloc_rx_skb(struct net_device *dev, int id)
 			goto partial_error;
 		skb_fill_page_desc(skb, 0, page, 0, PAGE_SIZE);
 		mapping[1] =
-			ib_dma_map_page(priv->ca, skb_shinfo(skb)->frags[0].page,
+			ib_dma_map_page(priv->ca, page,
 					0, PAGE_SIZE, DMA_FROM_DEVICE);
 		if (unlikely(ib_dma_mapping_error(priv->ca, mapping[1])))
 			goto partial_error;
@@ -322,9 +322,10 @@ static int ipoib_dma_map_tx(struct ib_device *ca,
 		off = 0;
 
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
-		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		mapping[i + off] = ib_dma_map_page(ca, frag->page,
-						 frag->page_offset, frag->size,
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		mapping[i + off] = ib_dma_map_page(ca,
+						 skb_frag_page(frag),
+						 frag->page_offset, skb_frag_size(frag),
 						 DMA_TO_DEVICE);
 		if (unlikely(ib_dma_mapping_error(ca, mapping[i + off])))
 			goto partial_error;
@@ -333,8 +334,9 @@ static int ipoib_dma_map_tx(struct ib_device *ca,
 
 partial_error:
 	for (; i > 0; --i) {
-		skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
-		ib_dma_unmap_page(ca, mapping[i - !off], frag->size, DMA_TO_DEVICE);
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
+
+		ib_dma_unmap_page(ca, mapping[i - !off], skb_frag_size(frag), DMA_TO_DEVICE);
 	}
 
 	if (off)
@@ -358,8 +360,9 @@ static void ipoib_dma_unmap_tx(struct ib_device *ca,
 		off = 0;
 
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
-		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		ib_dma_unmap_page(ca, mapping[i + off], frag->size,
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		ib_dma_unmap_page(ca, mapping[i + off], skb_frag_size(frag),
 				  DMA_TO_DEVICE);
 	}
 }
@@ -509,7 +512,7 @@ static inline int post_send(struct ipoib_dev_priv *priv,
 
 	for (i = 0; i < nr_frags; ++i) {
 		priv->tx_sge[i + off].addr = mapping[i + off];
-		priv->tx_sge[i + off].length = frags[i].size;
+		priv->tx_sge[i + off].length = skb_frag_size(&frags[i]);
 	}
 	priv->tx_wr.num_sge	     = nr_frags + off;
 	priv->tx_wr.wr_id 	     = wr_id;

drivers/infiniband/ulp/ipoib/ipoib_main.c

@@ -998,7 +998,7 @@ static const struct net_device_ops ipoib_netdev_ops = {
 	.ndo_fix_features	 = ipoib_fix_features,
 	.ndo_start_xmit	 	 = ipoib_start_xmit,
 	.ndo_tx_timeout		 = ipoib_timeout,
-	.ndo_set_multicast_list	 = ipoib_set_mcast_list,
+	.ndo_set_rx_mode	 = ipoib_set_mcast_list,
 	.ndo_neigh_setup	 = ipoib_neigh_setup_dev,
 };
 

drivers/media/dvb/dvb-core/dvb_net.c

@@ -1230,7 +1230,7 @@ static const struct net_device_ops dvb_netdev_ops = {
 	.ndo_open		= dvb_net_open,
 	.ndo_stop		= dvb_net_stop,
 	.ndo_start_xmit		= dvb_net_tx,
-	.ndo_set_multicast_list = dvb_net_set_multicast_list,
+	.ndo_set_rx_mode	= dvb_net_set_multicast_list,
 	.ndo_set_mac_address    = dvb_net_set_mac,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,

drivers/net/Kconfig

@@ -2,9 +2,6 @@
 # Network device configuration
 #
 
-config HAVE_NET_MACB
-	bool
-
 menuconfig NETDEVICES
 	default y if UML
 	depends on NET
@@ -28,18 +25,32 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config IFB
-	tristate "Intermediate Functional Block support"
-	depends on NET_CLS_ACT
+config NET_CORE
+	default y
+	bool "Network core driver support"
 	---help---
-	  This is an intermediate driver that allows sharing of
-	  resources.
+	  You can say N here if you do not intend to use any of the
+	  networking core drivers (i.e. VLAN, bridging, bonding, etc.)
+
+if NET_CORE
+
+config BONDING
+	tristate "Bonding driver support"
+	depends on INET
+	depends on IPV6 || IPV6=n
+	---help---
+	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+	  Channels together. This is called 'Etherchannel' by Cisco,
+	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+	  The driver supports multiple bonding modes to allow for both high
+	  performance and high availability operation.
+
+	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  information.
+
 	  To compile this driver as a module, choose M here: the module
-	  will be called ifb.  If you want to use more than one ifb
-	  device at a time, you need to compile this driver as a module.
-	  Instead of 'ifb', the devices will then be called 'ifb0',
-	  'ifb1' etc.
-	  Look at the iproute2 documentation directory for usage etc
+	  will be called bonding.
 
 config DUMMY
 	tristate "Dummy net driver support"
@@ -60,23 +71,59 @@ config DUMMY
 	  Instead of 'dummy', the devices will then be called 'dummy0',
 	  'dummy1' etc.
 
-config BONDING
-	tristate "Bonding driver support"
-	depends on INET
-	depends on IPV6 || IPV6=n
+config EQUALIZER
+	tristate "EQL (serial line load balancing) support"
 	---help---
-	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
-	  Channels together. This is called 'Etherchannel' by Cisco,
-	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+	  If you have two serial connections to some other computer (this
+	  usually requires two modems and two telephone lines) and you use
+	  SLIP (the protocol for sending Internet traffic over telephone
+	  lines) or PPP (a better SLIP) on them, you can make them behave like
+	  one double speed connection using this driver.  Naturally, this has
+	  to be supported at the other end as well, either with a similar EQL
+	  Linux driver or with a Livingston Portmaster 2e.
 
-	  The driver supports multiple bonding modes to allow for both high
-	  performance and high availability operation.
+	  Say Y if you want this and read
+	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  section 6.2 of the NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
 
-	  Refer to <file:Documentation/networking/bonding.txt> for more
-	  information.
+	  To compile this driver as a module, choose M here: the module
+	  will be called eql.  If unsure, say N.
+
+config NET_FC
+	bool "Fibre Channel driver support"
+	depends on SCSI && PCI
+	help
+	  Fibre Channel is a high speed serial protocol mainly used to connect
+	  large storage devices to the computer; it is compatible with and
+	  intended to replace SCSI.
 
+	  If you intend to use Fibre Channel, you need to have a Fibre channel
+	  adaptor card in your computer; say Y here and to the driver for your
+	  adaptor below. You also should have said Y to "SCSI support" and
+	  "SCSI generic support".
+
+config MII
+	tristate "Generic Media Independent Interface device support"
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lacks MII.
+
+source "drivers/ieee802154/Kconfig"
+
+config IFB
+	tristate "Intermediate Functional Block support"
+	depends on NET_CLS_ACT
+	---help---
+	  This is an intermediate driver that allows sharing of
+	  resources.
 	  To compile this driver as a module, choose M here: the module
-	  will be called bonding.
+	  will be called ifb.  If you want to use more than one ifb
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'ifb', the devices will then be called 'ifb0',
+	  'ifb1' etc.
+	  Look at the iproute2 documentation directory for usage etc
 
 config MACVLAN
 	tristate "MAC-VLAN support (EXPERIMENTAL)"
@@ -105,24 +152,46 @@ config MACVTAP
 	  To compile this driver as a module, choose M here: the module
 	  will be called macvtap.
 
-config EQUALIZER
-	tristate "EQL (serial line load balancing) support"
+config NETCONSOLE
+	tristate "Network console logging support"
 	---help---
-	  If you have two serial connections to some other computer (this
-	  usually requires two modems and two telephone lines) and you use
-	  SLIP (the protocol for sending Internet traffic over telephone
-	  lines) or PPP (a better SLIP) on them, you can make them behave like
-	  one double speed connection using this driver.  Naturally, this has
-	  to be supported at the other end as well, either with a similar EQL
-	  Linux driver or with a Livingston Portmaster 2e.
+	If you want to log kernel messages over the network, enable this.
+	See <file:Documentation/networking/netconsole.txt> for details.
 
-	  Say Y if you want this and read
-	  <file:Documentation/networking/eql.txt>.  You may also want to read
-	  section 6.2 of the NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+config NETCONSOLE_DYNAMIC
+	bool "Dynamic reconfiguration of logging targets"
+	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+			!(NETCONSOLE=y && CONFIGFS_FS=m)
+	help
+	  This option enables the ability to dynamically reconfigure target
+	  parameters (interface, IP addresses, port numbers, MAC addresses)
+	  at runtime through a userspace interface exported using configfs.
+	  See <file:Documentation/networking/netconsole.txt> for details.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called eql.  If unsure, say N.
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NETPOLL_TRAP
+	bool "Netpoll traffic trapping"
+	default n
+	depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
 
 config TUN
 	tristate "Universal TUN/TAP device driver support"
@@ -154,6 +223,28 @@ config VETH
 	  When one end receives the packet it appears on its pair and vice
 	  versa.
 
+config VIRTIO_NET
+	tristate "Virtio network driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && VIRTIO
+	---help---
+	  This is the virtual network driver for virtio.  It can be used with
+	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
+
+endif # NET_CORE
+
+config SUNGEM_PHY
+	tristate
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/net/caif/Kconfig"
+
+source "drivers/net/ethernet/Kconfig"
+
+source "drivers/net/fddi/Kconfig"
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP
@@ -178,3271 +269,65 @@ config NET_SB1000
 
 	  If you don't have this card, of course say N.
 
-source "drivers/net/arcnet/Kconfig"
-
-config MII
-	tristate "Generic Media Independent Interface device support"
-	help
-	  Most ethernet controllers have MII transceiver either as an external
-	  or internal device.  It is safe to say Y or M here even if your
-	  ethernet card lacks MII.
-
 source "drivers/net/phy/Kconfig"
 
-#
-#	Ethernet
-#
-
-menuconfig NET_ETHERNET
-	bool "Ethernet (10 or 100Mbit)"
-	depends on !UML
-	---help---
-	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-	  type of Local Area Network (LAN) in universities and companies.
-
-	  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
-	  coaxial cable, linking computers in a chain), 10BASE-T or twisted
-	  pair (10 Mbps over twisted pair cable, linking computers to central
-	  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
-	  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
-	  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
-	  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
-	  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
-	  Ethernet (1 Gbps over optical fiber or short copper links).
-
-	  If your Linux machine will be connected to an Ethernet and you have
-	  an Ethernet network interface card (NIC) installed in your computer,
-	  say Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. You will then also have
-	  to say Y to the driver for your particular NIC.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Ethernet network cards. If unsure, say N.
-
-if NET_ETHERNET
-
-config MACB
-	tristate "Atmel MACB support"
-	depends on HAVE_NET_MACB
-	select PHYLIB
-	help
-	  The Atmel MACB ethernet interface is found on many AT32 and AT91
-	  parts. Say Y to include support for the MACB chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called macb.
-
-source "drivers/net/arm/Kconfig"
-
-config AX88796
-	tristate "ASIX AX88796 NE2000 clone support"
-	depends on ARM || MIPS || SUPERH
-	select PHYLIB
-	select MDIO_BITBANG
-	help
-	  AX88796 driver, using platform bus to provide
-	  chip detection and resources
-
-config AX88796_93CX6
-	bool "ASIX AX88796 external 93CX6 eeprom support"
-	depends on AX88796
-	select EEPROM_93CX6
-	help
-	  Select this if your platform comes with an external 93CX6 eeprom.
-
-config MACE
-	tristate "MACE (Power Mac ethernet) support"
-	depends on PPC_PMAC && PPC32
-	select CRC32
-	help
-	  Power Macintoshes and clones with Ethernet built-in on the
-	  motherboard will usually use a MACE (Medium Access Control for
-	  Ethernet) interface. Say Y to include support for the MACE chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called mace.
+source "drivers/net/plip/Kconfig"
 
-config MACE_AAUI_PORT
-	bool "Use AAUI port instead of TP by default"
-	depends on MACE
-	help
-	  Some Apple machines (notably the Apple Network Server) which use the
-	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
-	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
-	  Y here if you have such a machine.  If unsure, say N.
-	  The driver will default to AAUI on ANS anyway, and if you use it as
-	  a module, you can provide the port_aaui=0|1 to force the driver.
-
-config BMAC
-	tristate "BMAC (G3 ethernet) support"
-	depends on PPC_PMAC && PPC32
-	select CRC32
-	help
-	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
-	  computers.
+source "drivers/net/ppp/Kconfig"
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called bmac.
+source "drivers/net/slip/Kconfig"
 
-config ARIADNE
-	tristate "Ariadne support"
-	depends on ZORRO
-	help
-	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
-	  Otherwise, say N.
+source "drivers/s390/net/Kconfig"
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called ariadne.
+source "drivers/net/tokenring/Kconfig"
 
-config A2065
-	tristate "A2065 support"
-	depends on ZORRO
-	select CRC32
-	help
-	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
-	  say N.
+source "drivers/net/usb/Kconfig"
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called a2065.
+source "drivers/net/wireless/Kconfig"
 
-config HYDRA
-	tristate "Hydra support"
-	depends on ZORRO
-	select CRC32
-	help
-	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+source "drivers/net/wimax/Kconfig"
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called hydra.
+source "drivers/net/wan/Kconfig"
 
-config ZORRO8390
-	tristate "Zorro NS8390-based Ethernet support"
-	depends on ZORRO
-	select CRC32
+config XEN_NETDEV_FRONTEND
+	tristate "Xen network device frontend driver"
+	depends on XEN
+	select XEN_XENBUS_FRONTEND
+	default y
 	help
-	  This driver is for Zorro Ethernet cards using an NS8390-compatible
-	  chipset, like the Village Tronic Ariadne II and the Individual
-	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
-	  Otherwise, say N.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called zorro8390.
+	  This driver provides support for Xen paravirtual network
+	  devices exported by a Xen network driver domain (often
+	  domain 0).
 
-config APNE
-	tristate "PCMCIA NE2000 support"
-	depends on AMIGA_PCMCIA
-	select CRC32
-	help
-	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
-	  say N.
+	  The corresponding Linux backend driver is enabled by the
+	  CONFIG_XEN_NETDEV_BACKEND option.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called apne.
+	  If you are compiling a kernel for use as Xen guest, you
+	  should say Y here. To compile this driver as a module, chose
+	  M here: the module will be called xen-netfront.
 
-config MAC8390
-	bool "Macintosh NS 8390 based ethernet cards"
-	depends on MAC
-	select CRC32
+config XEN_NETDEV_BACKEND
+	tristate "Xen backend network device"
+	depends on XEN_BACKEND
 	help
-	  If you want to include a driver to support Nubus or LC-PDS
-	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config MAC89x0
-	tristate "Macintosh CS89x0 based ethernet cards"
-	depends on MAC
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards.  If you have a
-	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called mac89x0.
-
-config MACSONIC
-	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
-	depends on MAC
-	---help---
-	  Support for NatSemi SONIC based Ethernet devices.  This includes
-	  the onboard Ethernet in many Quadras as well as some LC-PDS,
-	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
-	  one of these say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called macsonic.
+	  This driver allows the kernel to act as a Xen network driver
+	  domain which exports paravirtual network devices to other
+	  Xen domains. These devices can be accessed by any operating
+	  system that implements a compatible front end.
 
-config MACMACE
-	bool "Macintosh (AV) onboard MACE ethernet"
-	depends on MAC
-	select CRC32
-	help
-	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
-	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  The corresponding Linux frontend driver is enabled by the
+	  CONFIG_XEN_NETDEV_FRONTEND configuration option.
 
-config MVME147_NET
-	tristate "MVME147 (Lance) Ethernet support"
-	depends on MVME147
-	select CRC32
-	help
-	  Support for the on-board Ethernet interface on the Motorola MVME147
-	  single-board computer.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config MVME16x_NET
-	tristate "MVME16x Ethernet support"
-	depends on MVME16x
-	help
-	  This is the driver for the Ethernet interface on the Motorola
-	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config BVME6000_NET
-	tristate "BVME6000 Ethernet support"
-	depends on BVME6000
-	help
-	  This is the driver for the Ethernet interface on BVME4000 and
-	  BVME6000 VME boards.  Say Y here to include the driver for this chip
-	  in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config ATARILANCE
-	tristate "Atari Lance support"
-	depends on ATARI
-	help
-	  Say Y to include support for several Atari Ethernet adapters based
-	  on the AMD Lance chipset: RieblCard (with or without battery), or
-	  PAMCard VME (also the version by Rhotron, with different addresses).
-
-config SUN3LANCE
-	tristate "Sun3/Sun3x on-board LANCE support"
-	depends on SUN3 || SUN3X
-	help
-	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
-	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
-	  here to compile in the Linux driver for this and enable Ethernet.
-	  General Linux information on the Sun 3 and 3x series (now
-	  discontinued) is at
-	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you're not building a kernel for a Sun 3, say N.
-
-config SUN3_82586
-	bool "Sun3 on-board Intel 82586 support"
-	depends on SUN3
-	help
-	  This driver enables support for the on-board Intel 82586 based
-	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
-	  that this driver does not support 82586-based adapters on additional
-	  VME boards.
-
-config HPLANCE
-	bool "HP on-board LANCE support"
-	depends on DIO
-	select CRC32
-	help
-	  If you want to use the builtin "LANCE" Ethernet controller on an
-	  HP300 machine, say Y here.
-
-config LASI_82596
-	tristate "Lasi ethernet"
-	depends on GSC
-	help
-	  Say Y here to support the builtin Intel 82596 ethernet controller
-	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
-
-config SNI_82596
-	tristate "SNI RM ethernet"
-	depends on NET_ETHERNET && SNI_RM
-	help
-	  Say Y here to support the on-board Intel 82596 ethernet controller
-	  built into SNI RM machines.
-
-config KORINA
-	tristate "Korina (IDT RC32434) Ethernet support"
-	depends on NET_ETHERNET && MIKROTIK_RB532
-	help
-	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
-	  based system say Y. Otherwise say N.
-
-config MIPS_JAZZ_SONIC
-	tristate "MIPS JAZZ onboard SONIC Ethernet support"
-	depends on MACH_JAZZ
-	help
-	  This is the driver for the onboard card of MIPS Magnum 4000,
-	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-
-config XTENSA_XT2000_SONIC
-	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
-	depends on XTENSA_PLATFORM_XT2000
-	help
-	  This is the driver for the onboard card of the Xtensa XT2000 board.
-
-config MIPS_AU1X00_ENET
-	tristate "MIPS AU1000 Ethernet support"
-	depends on MIPS_ALCHEMY
-	select PHYLIB
-	select CRC32
-	help
-	  If you have an Alchemy Semi AU1X00 based system
-	  say Y.  Otherwise, say N.
-
-config SGI_IOC3_ETH
-	bool "SGI IOC3 Ethernet"
-	depends on PCI && SGI_IP27
-	select CRC32
-	select MII
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config MIPS_SIM_NET
-	tristate "MIPS simulator Network device"
-	depends on MIPS_SIM
-	help
-	  The MIPSNET device is a simple Ethernet network device which is
-	  emulated by the MIPS Simulator.
-	  If you are not using a MIPSsim or are unsure, say N.
-
-config SGI_O2MACE_ETH
-	tristate "SGI O2 MACE Fast Ethernet support"
-	depends on SGI_IP32=y
-
-config STNIC
-	tristate "National DP83902AV  support"
-	depends on SUPERH
-	select CRC32
-	help
-	  Support for cards based on the National Semiconductor DP83902AV
-	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
-	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
-	  <http://www.national.com/pf/DP/DP83902A.html>.
-
-	  If unsure, say N.
-
-config SH_ETH
-	tristate "Renesas SuperH Ethernet support"
-	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
-		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
-		 CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
-	select CRC32
-	select MII
-	select MDIO_BITBANG
-	select PHYLIB
-	help
-	  Renesas SuperH Ethernet device driver.
-	  This driver supporting CPUs are:
-		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
-
-config SUNLANCE
-	tristate "Sun LANCE support"
-	depends on SBUS
-	select CRC32
-	help
-	  This driver supports the "le" interface present on all 32-bit Sparc
-	  systems, on some older Ultra systems and as an Sbus option.  These
-	  cards are based on the AMD Lance chipset, which is better known
-	  via the NE2100 cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunlance.
-
-config HAPPYMEAL
-	tristate "Sun Happy Meal 10/100baseT support"
-	depends on SBUS || PCI
-	select CRC32
-	help
-	  This driver supports the "hme" interface present on most Ultra
-	  systems and as an option on older Sbus systems. This driver supports
-	  both PCI and Sbus devices. This driver also supports the "qfe" quad
-	  100baseT device available in both PCI and Sbus configurations.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunhme.
-
-config SUNBMAC
-	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
-	depends on SBUS && EXPERIMENTAL
-	select CRC32
-	help
-	  This driver supports the "be" interface available as an Sbus option.
-	  This is Sun's older 100baseT Ethernet device.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunbmac.
-
-config SUNQE
-	tristate "Sun QuadEthernet support"
-	depends on SBUS
-	select CRC32
-	help
-	  This driver supports the "qe" 10baseT Ethernet device, available as
-	  an Sbus option. Note that this is not the same as Quad FastEthernet
-	  "qfe" which is supported by the Happy Meal driver instead.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sunqe.
-
-config SUNGEM
-	tristate "Sun GEM support"
-	depends on PCI
-	select CRC32
-	help
-	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
-	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
-
-config CASSINI
-	tristate "Sun Cassini support"
-	depends on PCI
-	select CRC32
-	help
-	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
-	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
-
-config SUNVNET
-	tristate "Sun Virtual Network support"
-	depends on SUN_LDOMS
-	help
-	  Support for virtual network devices under Sun Logical Domains.
-
-config NET_VENDOR_3COM
-	bool "3COM cards"
-	depends on ISA || EISA || MCA || PCI
-	help
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about 3COM cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-config EL1
-	tristate "3c501 \"EtherLink\" support"
-	depends on NET_VENDOR_3COM && ISA
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Also, consider buying a
-	  new card, since the 3c501 is slow, broken, and obsolete: you will
-	  have problems.  Some people suggest to ping ("man ping") a nearby
-	  machine every minute ("man cron") when using this card.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c501.
-
-config EL2
-	tristate "3c503 \"EtherLink II\" support"
-	depends on NET_VENDOR_3COM && ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c503.
-
-config ELPLUS
-	tristate "3c505 \"EtherLink Plus\" support"
-	depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
-	---help---
-	  Information about this network (Ethernet) card can be found in
-	  <file:Documentation/networking/3c505.txt>.  If you have a card of
-	  this type, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c505.
-
-config EL16
-	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
-	depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c507.
-
-config EL3
-	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
-	depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
-	---help---
-	  If you have a network (Ethernet) card belonging to the 3Com
-	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>.
-
-	  If your card is not working you may need to use the DOS
-	  setup disk to disable Plug & Play mode, and to select the default
-	  media type.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c509.
-
-config 3C515
-	tristate "3c515 ISA \"Fast EtherLink\""
-	depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
-	help
-	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
-	  network card, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c515.
-
-config ELMC
-	tristate "3c523 \"EtherLink/MC\" support"
-	depends on NET_VENDOR_3COM && MCA_LEGACY
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c523.
-
-config ELMC_II
-	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
-	depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c527.
-
-config VORTEX
-	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
-	depends on NET_VENDOR_3COM && (PCI || EISA)
-	select MII
-	---help---
-	  This option enables driver support for a large number of 10Mbps and
-	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
-
-	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
-	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
-	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
-	  "Tornado"   (3c905)                                  PCI
-	  "Hurricane" (3c555/3cSOHO)                           PCI
-
-	  If you have such a card, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>. More
-	  specific information is in
-	  <file:Documentation/networking/vortex.txt> and in the comments at
-	  the beginning of <file:drivers/net/3c59x.c>.
-
-	  To compile this support as a module, choose M here.
-
-config TYPHOON
-	tristate "3cr990 series \"Typhoon\" support"
-	depends on NET_VENDOR_3COM && PCI
-	select CRC32
-	---help---
-	  This option enables driver support for the 3cr990 series of cards:
-
-	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
-	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
-	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
-
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called typhoon.
-
-config LANCE
-	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-	depends on ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
-	  of this type.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called lance.  This is recommended.
-
-config NET_VENDOR_SMC
-	bool "Western Digital/SMC cards"
-	depends on ISA || MCA || EISA || MAC
-	help
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Western Digital cards. If you say Y, you will be
-	  asked for your specific card in the following questions.
-
-config WD80x3
-	tristate "WD80*3 support"
-	depends on NET_VENDOR_SMC && ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called wd.
-
-config ULTRAMCA
-	tristate "SMC Ultra MCA support"
-	depends on NET_VENDOR_SMC && MCA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type and are running
-	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-mca.
-
-config ULTRA
-	tristate "SMC Ultra support"
-	depends on NET_VENDOR_SMC && ISA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Important: There have been many reports that, with some motherboards
-	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
-	  such as some BusLogic models) causes corruption problems with many
-	  operating systems. The Linux smc-ultra driver has a work-around for
-	  this but keep it in mind if you have such a SCSI card and have
-	  problems.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-ultra.
-
-config ULTRA32
-	tristate "SMC Ultra32 EISA support"
-	depends on NET_VENDOR_SMC && EISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc-ultra32.
-
-config BFIN_MAC
-	tristate "Blackfin on-chip MAC support"
-	depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
-	select CRC32
-	select MII
-	select PHYLIB
-	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
-	help
-	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
-	  compiled into the kernel. This driver is also available as a module
-	  ( = code which can be inserted in and removed from the running kernel
-	  whenever you want). The module will be called bfin_mac.
-
-config BFIN_MAC_USE_L1
-	bool "Use L1 memory for rx/tx packets"
-	depends on BFIN_MAC && (BF527 || BF537)
-	default y
-	help
-	  To get maximum network performance, you should use L1 memory as rx/tx buffers.
-	  Say N here if you want to reserve L1 memory for other uses.
-
-config BFIN_TX_DESC_NUM
-	int "Number of transmit buffer packets"
-	depends on BFIN_MAC
-	range 6 10 if BFIN_MAC_USE_L1
-	range 10 100
-	default "10"
-	help
-	  Set the number of buffer packets used in driver.
-
-config BFIN_RX_DESC_NUM
-	int "Number of receive buffer packets"
-	depends on BFIN_MAC
-	range 20 100 if BFIN_MAC_USE_L1
-	range 20 800
-	default "20"
-	help
-	  Set the number of buffer packets used in driver.
-
-config BFIN_MAC_USE_HWSTAMP
-	bool "Use IEEE 1588 hwstamp"
-	depends on BFIN_MAC && BF518
-	default y
-	help
-	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-
-config SMC9194
-	tristate "SMC 9194 support"
-	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
-	select CRC32
-	---help---
-	  This is support for the SMC9xxx based Ethernet cards. Choose this
-	  option if you have a DELL laptop with the docking station, or
-	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
-	  into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smc9194.
-
-config SMC91X
-	tristate "SMC 91C9x/91C1xxx support"
-	select CRC32
-	select MII
-	depends on ARM || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300 || COLDFIRE
-	help
-	  This is a driver for SMC's 91x series of Ethernet chipsets,
-	  including the SMC91C94 and the SMC91C111. Say Y if you want it
-	  compiled into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
-	  available from  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called smc91x.  If you want to compile it as a
-	  module, say M here and read <file:Documentation/kbuild/modules.txt>.
-
-config PXA168_ETH
-	tristate "Marvell pxa168 ethernet support"
-	depends on CPU_PXA168
-	select PHYLIB
-	help
-	  This driver supports the pxa168 Ethernet ports.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pxa168_eth.
-
-config NET_NETX
-	tristate "NetX Ethernet support"
-	select MII
-	depends on ARCH_NETX
-	help
-	  This is support for the Hilscher netX builtin Ethernet ports
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called netx-eth.
-
-config TI_DAVINCI_EMAC
-	tristate "TI DaVinci EMAC Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	select TI_DAVINCI_MDIO
-	select TI_DAVINCI_CPDMA
-	select PHYLIB
-	help
-	  This driver supports TI's DaVinci Ethernet .
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_emac_driver.  This is recommended.
-
-config TI_DAVINCI_MDIO
-	tristate "TI DaVinci MDIO Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	select PHYLIB
-	help
-	  This driver supports TI's DaVinci MDIO module.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_mdio.  This is recommended.
-
-config TI_DAVINCI_CPDMA
-	tristate "TI DaVinci CPDMA Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
-	help
-	  This driver supports TI's DaVinci CPDMA dma engine.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called davinci_cpdma.  This is recommended.
-
-config DM9000
-	tristate "DM9000 support"
-	depends on ARM || BLACKFIN || MIPS
-	select CRC32
-	select MII
-	---help---
-	  Support for DM9000 chipset.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called dm9000.
-
-config DM9000_DEBUGLEVEL
-	int "DM9000 maximum debug level"
-	depends on DM9000
-	default 4
-	help
-	  The maximum level of debugging code compiled into the DM9000
-	  driver.
-
-config DM9000_FORCE_SIMPLE_PHY_POLL
-	bool "Force simple NSR based PHY polling"
-	depends on DM9000
-	---help---
-	  This configuration forces the DM9000 to use the NSR's LinkStatus
-	  bit to determine if the link is up or down instead of the more
-	  costly MII PHY reads. Note, this will not work if the chip is
-	  operating with an external PHY.
-
-config ENC28J60
-	tristate "ENC28J60 support"
-	depends on EXPERIMENTAL && SPI && NET_ETHERNET
-	select CRC32
-	---help---
-	  Support for the Microchip EN28J60 ethernet chip.
-
-	  To compile this driver as a module, choose M here. The module will be
-	  called enc28j60.
-
-config ENC28J60_WRITEVERIFY
-	bool "Enable write verify"
-	depends on ENC28J60
-	---help---
-	  Enable the verify after the buffer write useful for debugging purpose.
-	  If unsure, say N.
-
-config ETHOC
-	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
-	depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
-	select MII
-	select PHYLIB
-	select CRC32
-	select BITREVERSE
-	help
-	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
-
-config GRETH
-	tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
-	depends on SPARC
-	select PHYLIB
-	select CRC32
-	help
-	  Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
-
-config SMC911X
-	tristate "SMSC LAN911[5678] support"
-	select CRC32
-	select MII
-	depends on ARM || SUPERH || MN10300
-	help
-	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
-	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
-	  Say Y if you want it compiled into the kernel, 
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver is also available as a module. The module will be 
-	  called smc911x.  If you want to compile it as a module, say M 
-	  here and read <file:Documentation/kbuild/modules.txt>
-
-config SMSC911X
-	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300
-	select CRC32
-	select MII
-	select PHYLIB
-	---help---
-	  Say Y here if you want support for SMSC LAN911x and LAN921x families
-	  of ethernet controllers.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called smsc911x.
-
-config SMSC911X_ARCH_HOOKS
-	def_bool n
-	depends on SMSC911X
-	help
-	  If the arch enables this, it allows the arch to implement various
-	  hooks for more comprehensive interrupt control and also to override
-	  the source of the MAC address.
-
-config NET_VENDOR_RACAL
-	bool "Racal-Interlan (Micom) NI cards"
-	depends on ISA
-	help
-	  If you have a network (Ethernet) card belonging to this class, such
-	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about NI cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-config NI5010
-	tristate "NI5010 support (EXPERIMENTAL)"
-	depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Note that this is still
-	  experimental code.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni5010.
-
-config NI52
-	tristate "NI5210 support"
-	depends on NET_VENDOR_RACAL && ISA
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni52.
-
-config NI65
-	tristate "NI6510 support"
-	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni65.
-
-config DNET
-	tristate "Dave ethernet support (DNET)"
-	depends on NET_ETHERNET && HAS_IOMEM
-	select PHYLIB
-	help
-	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
-	  Say Y to include support for the DNET chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called dnet.
-
-source "drivers/net/tulip/Kconfig"
-
-config AT1700
-	tristate "AT1700/1720 support (EXPERIMENTAL)"
-	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called at1700.
-
-config DEPCA
-	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-	depends on ISA || EISA || MCA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:drivers/net/depca.c>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called depca.
-
-config HP100
-	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
-	depends on ISA || EISA || PCI
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called hp100.
-
-config NET_ISA
-	bool "Other ISA cards"
-	depends on ISA
-	---help---
-	  If your network (Ethernet) card hasn't been mentioned yet and its
-	  bus system (that's the way the cards talks to the other components
-	  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
-	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  If unsure, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the remaining ISA network card questions. If you say Y, you will be
-	  asked for your specific card in the following questions.
-
-config E2100
-	tristate "Cabletron E21xx support"
-	depends on NET_ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e2100.
-
-config EWRK3
-	tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
-	depends on NET_ISA
-	select CRC32
-	---help---
-	  This driver supports the DE203, DE204 and DE205 network (Ethernet)
-	  cards. If this is for you, say Y and read
-	  <file:Documentation/networking/ewrk3.txt> in the kernel source as
-	  well as the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ewrk3.
-
-config EEXPRESS
-	tristate "EtherExpress 16 support"
-	depends on NET_ISA
-	---help---
-	  If you have an EtherExpress16 network (Ethernet) card, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
-	  EtherExpress16 card used to be regarded as a very poor choice
-	  because the driver was very unreliable. We now have a new driver
-	  that should do better.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eexpress.
-
-config EEXPRESS_PRO
-	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
-	depends on NET_ISA
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y. This
-	  driver supports Intel i82595{FX,TX} based boards. Note however
-	  that the EtherExpress PRO/100 Ethernet card has its own separate
-	  driver.  Please read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eepro.
-
-config HPLAN_PLUS
-	tristate "HP PCLAN+ (27247B and 27252A) support"
-	depends on NET_ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called hp-plus.
-
-config HPLAN
-	tristate "HP PCLAN (27245 and other 27xxx series) support"
-	depends on NET_ISA
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called hp.
-
-config LP486E
-	tristate "LP486E on board Ethernet"
-	depends on NET_ISA
-	help
-	  Say Y here to support the 82596-based on-board Ethernet controller
-	  for the Panther motherboard, which is one of the two shipped in the
-	  Intel Professional Workstation.
-
-config ETH16I
-	tristate "ICL EtherTeam 16i/32 support"
-	depends on NET_ISA
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eth16i.
-
-config NE2000
-	tristate "NE2000/NE1000 support"
-	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
-	  without a specific driver are compatible with NE2000.
-
-	  If you have a PCI NE2000 card however, say N here and Y to "PCI
-	  NE2000 and clone support" under "EISA, VLB, PCI and on board
-	  controllers" below. If you have a NE2000 card and are running on
-	  an MCA system (a bus system used on some IBM PS/2 computers and
-	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
-	  below.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne.
-
-config ZNET
-	tristate "Zenith Z-Note support (EXPERIMENTAL)"
-	depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
-	help
-	  The Zenith Z-Note notebook computer has a built-in network
-	  (Ethernet) card, and this is the Linux driver for it. Note that the
-	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
-	  by this driver. Read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-config SEEQ8005
-	tristate "SEEQ8005 support (EXPERIMENTAL)"
-	depends on NET_ISA && EXPERIMENTAL
-	help
-	  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
-	  is for you, read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called seeq8005.
-
-config NE2_MCA
-	tristate "NE/2 (ne2000 MCA version) support"
-	depends on MCA_LEGACY
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne2.
-
-config IBMLANA
-	tristate "IBM LAN Adapter/A support"
-	depends on MCA
-	---help---
-	  This is a Micro Channel Ethernet adapter.  You need to set
-	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
-	  driver and as a module.
-
-	  To compile this driver as a module, choose M here. The only
-	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
-	  will both support 16K and 32K memory windows, however a 32K window
-	  gives a better security against packet losses.  Usage of multiple
-	  boards with this driver should be possible, but has not been tested
-	  up to now due to lack of hardware.
-
-config IBMVETH
-	tristate "IBM LAN Virtual Ethernet support"
-	depends on PPC_PSERIES
-	---help---
-	  This driver supports virtual ethernet adapters on newer IBM iSeries
-	  and pSeries systems.
-
-	  To compile this driver as a module, choose M here. The module will
-	  be called ibmveth.
-
-source "drivers/net/ibm_newemac/Kconfig"
-
-config NET_PCI
-	bool "EISA, VLB, PCI and on board controllers"
-	depends on ISA || EISA || PCI
-	help
-	  This is another class of network cards which attach directly to the
-	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about this class of network cards. If you say Y, you
-	  will be asked for your specific card in the following questions. If
-	  you are unsure, say Y.
-
-config PCNET32
-	tristate "AMD PCnet32 PCI support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pcnet32.
-
-config AMD8111_ETH
-	tristate "AMD 8111 (new PCI lance) support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have an AMD 8111-based PCI lance ethernet card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called amd8111e.
-
-config ADAPTEC_STARFIRE
-	tristate "Adaptec Starfire/DuraLAN support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
-	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
-	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
-	  driver.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called starfire.  This is recommended.
-
-config AC3200
-	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
-	depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ac3200.
-
-config KSZ884X_PCI
-	tristate "Micrel KSZ8841/2 PCI"
-	depends on NET_PCI && PCI
-	select MII
-	select CRC32
-	help
-	  This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ksz884x.
-
-config APRICOT
-	tristate "Apricot Xen-II on board Ethernet"
-	depends on NET_PCI && ISA
-	help
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called apricot.
-
-config B44
-	tristate "Broadcom 440x/47xx ethernet support"
-	depends on SSB_POSSIBLE && HAS_DMA
-	select SSB
-	select MII
-	help
-	  If you have a network (Ethernet) controller of this type, say Y
-	  or M and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called b44.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B44_PCI_AUTOSELECT
-	bool
-	depends on B44 && SSB_PCIHOST_POSSIBLE
-	select SSB_PCIHOST
-	default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B44_PCICORE_AUTOSELECT
-	bool
-	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
-	select SSB_DRIVER_PCICORE
-	default y
-
-config B44_PCI
-	bool
-	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
-	default y
-
-config FORCEDETH
-	tristate "nForce Ethernet support"
-	depends on NET_PCI && PCI
-	help
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called forcedeth.
-
-config CS89x0
-	tristate "CS89x0 support"
-	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards. If you have a
-	  network (Ethernet) card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:Documentation/networking/cs89x0.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called cs89x0.
-
-config CS89x0_NONISA_IRQ
-	def_bool y
-	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
-
-config TC35815
-	tristate "TOSHIBA TC35815 Ethernet support"
-	depends on NET_PCI && PCI && MIPS
-	select PHYLIB
-
-config E100
-	tristate "Intel(R) PRO/100+ support"
-	depends on NET_PCI && PCI
-	select MII
-	---help---
-	  This driver supports Intel(R) PRO/100 family of adapters.
-	  To verify that your adapter is supported, find the board ID number 
-	  on the adapter. Look for a label that has a barcode and a number 
-	  in the format 123456-001 (six digits hyphen three digits). 
-
-	  Use the above information and the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  to identify the adapter.
-
-	  For the latest Intel PRO/100 network driver for Linux, see:
-
-	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/e100.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e100.
-
-config LNE390
-	tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
-	depends on NET_PCI && EISA && EXPERIMENTAL
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called lne390.
-
-config FEALNX
-	tristate "Myson MTD-8xx PCI Ethernet support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
-	  cards. <http://www.myson.com.tw/>
-
-config NATSEMI
-	tristate "National Semiconductor DP8381x series PCI Ethernet support"
-	depends on NET_PCI && PCI
-	select CRC32
-	help
-	  This driver is for the National Semiconductor DP83810 series,
-	  which is used in cards from PureData, NetGear, Linksys
-	  and others, including the 83815 chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/natsemi.html>.
-
-config NE2K_PCI
-	tristate "PCI NE2000 and clones support (see help)"
-	depends on NET_PCI && PCI
-	select CRC32
-	---help---
-	  This driver is for NE2000 compatible PCI cards. It will not work
-	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
-	  support" below). If you have a PCI NE2000 network (Ethernet) card,
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver also works for the following NE2000 clone cards:
-	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
-	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
-	  Holtek HT80232    Holtek HT80229
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne2k-pci.
-
-config NE3210
-	tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
-	depends on NET_PCI && EISA && EXPERIMENTAL
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
-	  will NOT WORK for NE3200 cards as they are completely different.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ne3210.
-
-config ES3210
-	tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
-	depends on NET_PCI && EISA && EXPERIMENTAL
-	select CRC32
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called es3210.
-
-config 8139CP
-	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL8139C+ chips. If you have one of those, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139cp.  This is recommended.
-
-config 8139TOO
-	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
-	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139too.  This is recommended.
-
-config 8139TOO_PIO
-	bool "Use PIO instead of MMIO"
-	default y
-	depends on 8139TOO
-	help
-	  This instructs the driver to use programmed I/O ports (PIO) instead
-	  of PCI shared memory (MMIO).  This can possibly solve some problems
-	  in case your mainboard has memory consistency issues.  If unsure,
-	  say N.
-
-config 8139TOO_TUNE_TWISTER
-	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
-	depends on 8139TOO
-	help
-	  This implements a function which might come in handy in case you
-	  are using low quality on long cabling. It is required for RealTek
-	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
-	  to match the transceiver to the cable characteristics. This is
-	  experimental since hardly documented by the manufacturer.
-	  If unsure, say Y.
-
-config 8139TOO_8129
-	bool "Support for older RTL-8129/8130 boards"
-	depends on 8139TOO
-	help
-	  This enables support for the older and uncommon RTL-8129 and
-	  RTL-8130 chips, which support MII via an external transceiver,
-	  instead of an internal one.  Disabling this option will save some
-	  memory by making the code size smaller.  If unsure, say Y.
-
-config 8139_OLD_RX_RESET
-	bool "Use older RX-reset method"
-	depends on 8139TOO
-	help
-	  The 8139too driver was recently updated to contain a more rapid
-	  reset sequence, in the face of severe receive errors.  This "new"
-	  RX-reset method should be adequate for all boards.  But if you
-	  experience problems, you can enable this option to restore the
-	  old RX-reset behavior.  If unsure, say N.
-
-config R6040
-	tristate "RDC R6040 Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	select PHYLIB
-	help
-	  This is a driver for the R6040 Fast Ethernet MACs found in the
-	  the RDC R-321x System-on-chips.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called r6040. This is recommended.
-
-config SIS900
-	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-	  SiS 630 and SiS 540 chipsets.
-
-	  This driver also supports AMD 79C901 HomePNA so that you can use
-	  your phone line as a network cable.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sis900.  This is recommended.
-
-config EPIC100
-	tristate "SMC EtherPower II"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
-	  which is based on the SMC83c17x (EPIC/100).
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/epic100.html>.
-
-config SMSC9420
-	tristate "SMSC LAN9420 PCI ethernet adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select PHYLIB
-	select SMSC_PHY
-	help
-	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
-	  Say Y if you want it compiled into the kernel,
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  This driver is also available as a module. The module will be
-	  called smsc9420.  If you want to compile it as a module, say M
-	  here and read <file:Documentation/kbuild/modules.txt>
-
-config SUNDANCE
-	tristate "Sundance Alta support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  This driver is for the Sundance "Alta" chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on SUNDANCE
-	help
-	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
-	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
-	  is known to solve bugs on certain chips.
-
-	  If unsure, say N.
-
-config TLAN
-	tristate "TI ThunderLAN support"
-	depends on NET_PCI && (PCI || EISA)
-	---help---
-	  If you have a PCI Ethernet network card based on the ThunderLAN chip
-	  which is supported by this driver, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Devices currently supported by this driver are Compaq Netelligent,
-	  Compaq NetFlex and Olicom cards.  Please read the file
-	  <file:Documentation/networking/tlan.txt> for more details.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called tlan.
-
-	  Please email feedback to <torben.mathiasen@compaq.com>.
-
-config KS8842
-	tristate "Micrel KSZ8841/42 with generic bus interface"
-	depends on HAS_IOMEM && DMA_ENGINE
-	help
-	  This platform driver is for KSZ8841(1-port) / KS8842(2-port)
-	  ethernet switch chip (managed, VLAN, QoS) from Micrel or
-	  Timberdale(FPGA).
-
-config KS8851
-	tristate "Micrel KS8851 SPI"
-	depends on SPI
-	select MII
-	select CRC32
-	help
-	  SPI driver for Micrel KS8851 SPI attached network chip.
-
-config KS8851_MLL
-	tristate "Micrel KS8851 MLL"
-	depends on HAS_IOMEM
-	select MII
-	help
-	  This platform driver is for Micrel KS8851 Address/data bus
-	  multiplexed network chip.
-
-config VIA_RHINE
-	tristate "VIA Rhine support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
-	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
-	  Ethernet functions can also be found integrated on South Bridges
-	  (e.g. VT8235).
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called via-rhine.
-
-config VIA_RHINE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on VIA_RHINE
-	help
-	  This instructs the driver to use PCI shared memory (MMIO) instead of
-	  programmed I/O ports (PIO). Enabling this gives an improvement in
-	  processing time in parts of the driver.
-
-	  If unsure, say Y.
-
-config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-	  have one of these, say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sc92031.  This is recommended.
-
-config CPMAC
-	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-	depends on NET_ETHERNET && EXPERIMENTAL && AR7
-	select PHYLIB
-	help
-	  TI AR7 CPMAC Ethernet support
-
-config NET_POCKET
-	bool "Pocket and portable adapters"
-	depends on PARPORT
-	---help---
-	  Cute little network (Ethernet) devices which attach to the parallel
-	  port ("pocket adapters"), commonly used with laptops. If you have
-	  one of those, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you want to plug a network (or some other) card into the PCMCIA
-	  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
-	  credit card size extension cards used by all modern laptops), you
-	  need the pcmcia-cs package (location contained in the file
-	  <file:Documentation/Changes>) and you can say N here.
-
-	  Laptop users should read the Linux Laptop home page at
-	  <http://www.linux-on-laptops.com/> or
-	  Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about this class of network devices. If you say Y, you
-	  will be asked for your specific device in the following questions.
-
-config ATP
-	tristate "AT-LAN-TEC/RealTek pocket adapter support"
-	depends on NET_POCKET && PARPORT && X86
-	select CRC32
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>, if you
-	  want to use this.  If you intend to use this driver, you should have
-	  said N to the "Parallel printer support", because the two drivers
-	  don't like each other.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called atp.
-
-config DE600
-	tristate "D-Link DE600 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de600.
-
-config DE620
-	tristate "D-Link DE620 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de620.
-
-config SGISEEQ
-	tristate "SGI Seeq ethernet controller support"
-	depends on SGI_HAS_SEEQ
-	help
-	  Say Y here if you have an Seeq based Ethernet network card. This is
-	  used in many Silicon Graphics machines.
-
-config DECLANCE
-	tristate "DEC LANCE ethernet controller support"
-	depends on MACH_DECSTATION
-	select CRC32
-	help
-	  This driver is for the series of Ethernet controllers produced by
-	  DEC (now Compaq) based on the AMD Lance chipset, including the
-	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
-
-config FEC
-	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
-		IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC
-	default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
-	select PHYLIB
-	help
-	  Say Y here if you want to use the built-in 10/100 Fast ethernet
-	  controller on some Motorola ColdFire and Freescale i.MX processors.
-
-config FEC_MPC52xx
-	tristate "MPC52xx FEC driver"
-	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select CRC32
-	select PHYLIB
-	select PPC_BESTCOMM_FEC
-	---help---
-	  This option enables support for the MPC5200's on-chip
-	  Fast Ethernet Controller
-	  If compiled as module, it will be called fec_mpc52xx.
-
-config FEC_MPC52xx_MDIO
-	bool "MPC52xx FEC MDIO bus driver"
-	depends on FEC_MPC52xx
-	default y
-	---help---
-	  The MPC5200's FEC can connect to the Ethernet either with
-	  an external MII PHY chip or 10 Mbps 7-wire interface
-	  (Motorola? industry standard).
-	  If your board uses an external PHY connected to FEC, enable this.
-	  If not sure, enable.
-	  If compiled as module, it will be called fec_mpc52xx_phy.
-
-config NE_H8300
-	tristate "NE2000 compatible support for H8/300"
-	depends on H8300
-	help
-	  Say Y here if you want to use the NE2000 compatible
-	  controller on the Renesas H8/300 processor.
-
-config ATL2
-	tristate "Atheros L2 Fast Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L2 fast ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl2.
-
-config XILINX_EMACLITE
-	tristate "Xilinx 10/100 Ethernet Lite support"
-	depends on PPC32 || MICROBLAZE
-	select PHYLIB
-	help
-	  This driver supports the 10/100 Ethernet Lite from Xilinx.
-
-config BCM63XX_ENET
-	tristate "Broadcom 63xx internal mac support"
-	depends on BCM63XX
-	select MII
-	select PHYLIB
-	help
-	  This driver supports the ethernet MACs in the Broadcom 63xx
-	  MIPS chipset family (BCM63XX).
-
-config FTMAC100
-	tristate "Faraday FTMAC100 10/100 Ethernet support"
-	depends on ARM
-	select MII
-	help
-	  This driver supports the FTMAC100 10/100 Ethernet controller
-	  from Faraday. It is used on Faraday A320, Andes AG101 and some
-	  other ARM/NDS32 SoC's.
-
-config LANTIQ_ETOP
-	tristate "Lantiq SoC ETOP driver"
-	depends on SOC_TYPE_XWAY
-	help
-	  Support for the MII0 inside the Lantiq SoC
-
-
-source "drivers/net/fs_enet/Kconfig"
-
-source "drivers/net/octeon/Kconfig"
-
-endif # NET_ETHERNET
-
-#
-#	Gigabit Ethernet
-#
-
-menuconfig NETDEV_1000
-	bool "Ethernet (1000 Mbit)"
-	depends on !UML
-	default y
-	---help---
-	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-	  type of Local Area Network (LAN) in universities and companies.
-
-	  Say Y here to get to see options for Gigabit Ethernet drivers.
-	  This option alone does not add any kernel code.
-	  Note that drivers supporting both 100 and 1000 MBit may be listed
-	  under "Ethernet (10 or 100MBit)" instead.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_1000
-
-config ACENIC
-	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
-	depends on PCI
-	---help---
-	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
-	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
-	  adapter. The driver allows for using the Jumbo Frame option (9000
-	  bytes/frame) however it requires that your switches can handle this
-	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
-	  line.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acenic.
-
-config ACENIC_OMIT_TIGON_I
-	bool "Omit support for old Tigon I based AceNICs"
-	depends on ACENIC
-	help
-	  Say Y here if you only have Tigon II based AceNICs and want to leave
-	  out support for the older Tigon I based cards which are no longer
-	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
-	  version)).  This will reduce the size of the driver object by
-	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
-	  Tigon II, say N here.
-
-	  The safe and default value for this is N.
-
-config DL2K
-	tristate "DL2000/TC902x-based Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	help
-	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
-	  which includes
-	  D-Link DGE-550T Gigabit Ethernet Adapter.
-	  D-Link DL2000-based Gigabit Ethernet Adapter.
-	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dl2k.
-
-config E1000
-	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go 
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e1000.
-
-config E1000E
-	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
-	depends on PCI && (!SPARC32 || BROKEN)
-	select CRC32
-	---help---
-	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
-	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
-	  use the regular e1000 driver For more information on how to
-	  identify your adapter, go to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e1000e.
-
-config IP1000
-	tristate "IP1000 Gigabit Ethernet support"
-	depends on PCI && EXPERIMENTAL
-	select MII
-	---help---
-	  This driver supports IP1000 gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ipg.  This is recommended.
-
-config IGB
-	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called igb.
-
-config IGB_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on IGB && DCA && !(IGB=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config IGBVF
-	tristate "Intel(R) 82576 Virtual Function Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) 82576 virtual functions.  For more
-	  information on how to identify your adapter, go to the Adapter &
-	  Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called igbvf.
-
-source "drivers/net/ixp2000/Kconfig"
-
-config NS83820
-	tristate "National Semiconductor DP83820 support"
-	depends on PCI
-	help
-	  This is a driver for the National Semiconductor DP83820 series
-	  of gigabit ethernet MACs.  Cards using this chipset include
-	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
-	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
-	  zero copy.
-
-config HAMACHI
-	tristate "Packet Engines Hamachi GNIC-II support"
-	depends on PCI
-	select MII
-	help
-	  If you have a Gigabit Ethernet card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module will be
-	  called hamachi.
-
-config YELLOWFIN
-	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
-	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
-	  used by the Beowulf Linux cluster project.  See
-	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
-	  information about this driver in particular and Beowulf in general.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called yellowfin.  This is recommended.
-
-config R8169
-	tristate "Realtek 8169 gigabit ethernet support"
-	depends on PCI
-	select FW_LOADER
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called r8169.  This is recommended.
-
-config SB1250_MAC
-	tristate "SB1250 Gigabit Ethernet support"
-	depends on SIBYTE_SB1xxx_SOC
-	select PHYLIB
-	---help---
-	  This driver supports Gigabit Ethernet interfaces based on the
-	  Broadcom SiByte family of System-On-a-Chip parts.  They include
-	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
-	  and BCM1480 chips.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sb1250-mac.
-
-config SIS190
-	tristate "SiS190/SiS191 gigabit ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
-	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
-	  appear in lan on motherboard designs which are based on SiS 965
-	  and SiS 966 south bridge.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sis190.  This is recommended.
-
-config SKGE
-	tristate "Marvell Yukon Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	---help---
-	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-	  and related Gigabit Ethernet adapters. It is a new smaller driver
-	  with better performance and more complete ethtool support.
-
-	  It does not support the link failover and network management 
-	  features that "portable" vendor supplied sk98lin driver does.
-
-	  This driver supports adapters based on the original Yukon chipset:
-	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
-	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
-
-	  It does not support the newer Yukon2 chipset: a separate driver,
-	  sky2, is provided for these adapters.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skge.  This is recommended.
-
-config SKGE_DEBUG
-	bool "Debugging interface"
-	depends on SKGE && DEBUG_FS
-	help
-	  This option adds the ability to dump driver state for debugging.
-	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
-	  transmit and receive rings.
-
-	  If unsure, say N.
-
-config SKGE_GENESIS
-       bool "Support for older SysKonnect Genesis boards"
-       depends on SKGE
-       help
-         This enables support for the older and uncommon SysKonnect Genesis
-	 chips, which support MII via an external transceiver, instead of
-	 an internal one. Disabling this option will save some memory
-	 by making code smaller. If unsure say Y.
-
-config SKY2
-	tristate "Marvell Yukon 2 support"
-	depends on PCI
-	select CRC32
-	---help---
-	  This driver supports Gigabit Ethernet adapters based on the
-	  Marvell Yukon 2 chipset:
-	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
-	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
-
-	  There is companion driver for the older Marvell Yukon and
-	  SysKonnect Genesis based adapters: skge.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sky2.  This is recommended.
-
-config SKY2_DEBUG
-	bool "Debugging interface"
-	depends on SKY2 && DEBUG_FS
-	help
-	  This option adds the ability to dump driver state for debugging.
-	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
-	  transmit and receive rings.
-
-	  If unsure, say N.
-
-config VIA_VELOCITY
-	tristate "VIA Velocity support"
-	depends on PCI
-	select CRC32
-	select CRC_CCITT
-	select MII
-	help
-	  If you have a VIA "Velocity" based network card say Y here.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called via-velocity.
-
-config TIGON3
-	tristate "Broadcom Tigon3 support"
-	depends on PCI
-	select PHYLIB
-	help
-	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called tg3.  This is recommended.
-
-config BNX2
-	tristate "Broadcom NetXtremeII support"
-	depends on PCI
-	select CRC32
-	select FW_LOADER
-	help
-	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called bnx2.  This is recommended.
-
-config CNIC
-	tristate "Broadcom CNIC support"
-	depends on PCI
-	select BNX2
-	select UIO
-	help
-	  This driver supports offload features of Broadcom NetXtremeII
-	  gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called cnic.  This is recommended.
-
-config SPIDER_NET
-	tristate "Spider Gigabit Ethernet driver"
-	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
-	select FW_LOADER
-	help
-	  This driver supports the Gigabit Ethernet chips present on the
-	  Cell Processor-Based Blades from IBM.
-
-config TSI108_ETH
-	tristate "Tundra TSI108 gigabit Ethernet support"
-	depends on TSI108_BRIDGE
-	help
-	  This driver supports Tundra TSI108 gigabit Ethernet ports.
-	  To compile this driver as a module, choose M here: the module
-	  will be called tsi108_eth.
-
-config GELIC_NET
-	tristate "PS3 Gigabit Ethernet driver"
-	depends on PPC_PS3
-	select PS3_SYS_MANAGER
-	help
-	  This driver supports the network device on the PS3 game
-	  console.  This driver has built-in support for Ethernet.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ps3_gelic.
-
-config GELIC_WIRELESS
-	bool "PS3 Wireless support"
-	depends on WLAN
-	depends on GELIC_NET
-	select WIRELESS_EXT
-	help
-	  This option adds the support for the wireless feature of PS3.
-	  If you have the wireless-less model of PS3 or have no plan to
-	  use wireless feature, disabling this option saves memory.  As
-	  the driver automatically distinguishes the models, you can
-	  safely enable this option even if you have a wireless-less model.
-
-config FSL_PQ_MDIO
-	tristate "Freescale PQ MDIO"
-	depends on FSL_SOC
-	select PHYLIB
-	help
-	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
-
-config GIANFAR
-	tristate "Gianfar Ethernet"
-	depends on FSL_SOC
-	select FSL_PQ_MDIO
-	select PHYLIB
-	select CRC32
-	help
-	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
-	  and MPC86xx family of chips, and the FEC on the 8540.
-
-config UCC_GETH
-	tristate "Freescale QE Gigabit Ethernet"
-	depends on QUICC_ENGINE
-	select FSL_PQ_MDIO
-	select PHYLIB
-	help
-	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
-	  which is available on some Freescale SOCs.
-
-config UGETH_TX_ON_DEMAND
-	bool "Transmit on Demand support"
-	depends on UCC_GETH
-
-config MV643XX_ETH
-	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
-	select INET_LRO
-	select PHYLIB
-	help
-	  This driver supports the gigabit ethernet MACs in the
-	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
-	  in the Marvell Orion ARM SoC family.
-
-	  Some boards that use the Discovery chipset are the Momenco
-	  Ocelot C and Jaguar ATX and Pegasos II.
-
-config XILINX_LL_TEMAC
-	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
-	depends on PPC || MICROBLAZE
-	select PHYLIB
-	help
-	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
-	  core used in Xilinx Spartan and Virtex FPGAs
-
-config QLA3XXX
-	tristate "QLogic QLA3XXX Network Driver Support"
-	depends on PCI
-	help
-	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called qla3xxx.
-
-config ATL1
-	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros/Attansic L1 gigabit ethernet
-	  adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1.
-
-config ATL1E
-	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L1E gigabit ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1e.
-
-config ATL1C
-	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L1C gigabit ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1c.
-
-config JME
-	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	---help---
-	  This driver supports the PCI-Express gigabit ethernet adapters
-	  based on JMicron JMC250 chipset.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called jme.
-
-config S6GMAC
-	tristate "S6105 GMAC ethernet support"
-	depends on XTENSA_VARIANT_S6000
-	select PHYLIB
-	help
-	  This driver supports the on chip ethernet device on the
-	  S6105 xtensa processor.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s6gmac.
-
-source "drivers/net/stmmac/Kconfig"
-
-config PCH_GBE
-	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
-	depends on PCI
-	select MII
-	---help---
-	  This is a gigabit ethernet driver for EG20T PCH.
-	  EG20T PCH is the platform controller hub that is used in Intel's
-	  general embedded platform.
-	  EG20T PCH has Gigabit Ethernet interface.
-	  Using this interface, it is able to access system devices connected
-	  to Gigabit Ethernet.
-	  This driver enables Gigabit Ethernet function.
-
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7223/ML7831.
-	  ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general
-	  purpose use.
-	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
-	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
-
-config FTGMAC100
-	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
-	depends on ARM
-	select PHYLIB
-	help
-	  This driver supports the FTGMAC100 Gigabit Ethernet controller
-	  from Faraday. It is used on Faraday A369, Andes AG102 and some
-	  other ARM/NDS32 SoC's.
-
-endif # NETDEV_1000
-
-#
-#	10 Gigabit Ethernet
-#
-
-menuconfig NETDEV_10000
-	bool "Ethernet (10000 Mbit)"
-	depends on !UML
-	default y
-	---help---
-	  Say Y here to get to see options for 10 Gigabit Ethernet drivers.
-	  This option alone does not add any kernel code.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_10000
-
-config MDIO
-	tristate
-
-config CHELSIO_T1
-	tristate "Chelsio 10Gb Ethernet support"
-	depends on PCI
-	select CRC32
-	select MDIO
-	help
-	  This driver supports Chelsio gigabit and 10-gigabit
-	  Ethernet cards. More information about adapter features and
-	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called cxgb.
-
-config CHELSIO_T1_1G
-	bool "Chelsio gigabit Ethernet support"
-	depends on CHELSIO_T1
-	help
-	  Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
-	  are using only 10G cards say 'N' here.
-
-config CHELSIO_T3
-	tristate "Chelsio Communications T3 10Gb Ethernet support"
-	depends on PCI && INET
-	select FW_LOADER
-	select MDIO
-	help
-	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
-	  adapters.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called cxgb3.
-
-config CHELSIO_T4
-	tristate "Chelsio Communications T4 Ethernet support"
-	depends on PCI
-	select FW_LOADER
-	select MDIO
-	help
-	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
-	  adapters.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module choose M here; the module
-	  will be called cxgb4.
-
-config CHELSIO_T4VF
-	tristate "Chelsio Communications T4 Virtual Function Ethernet support"
-	depends on PCI
-	help
-	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
-	  adapters with PCI-E SR-IOV Virtual Functions.
-
-	  For general information about Chelsio and our products, visit
-	  our website at <http://www.chelsio.com>.
-
-	  For customer support, please visit our customer support page at
-	  <http://www.chelsio.com/support.html>.
-
-	  Please send feedback to <linux-bugs@chelsio.com>.
-
-	  To compile this driver as a module choose M here; the module
-	  will be called cxgb4vf.
-
-config EHEA
-	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET && SPARSEMEM
-	select INET_LRO
-	---help---
-	  This driver supports the IBM pSeries eHEA ethernet adapter.
-
-	  To compile the driver as a module, choose M here. The module
-	  will be called ehea.
-
-config ENIC
-	tristate "Cisco VIC Ethernet NIC Support"
-	depends on PCI && INET
-	help
-	  This enables the support for the Cisco VIC Ethernet card.
-
-config IXGBE
-	tristate "Intel(R) 10GbE PCI Express adapters support"
-	depends on PCI && INET
-	select MDIO
-	---help---
-	  This driver supports Intel(R) 10GbE PCI Express family of
-	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgbe.
-
-config IXGBE_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config IXGBE_DCB
-	bool "Data Center Bridging (DCB) Support"
-	default n
-	depends on IXGBE && DCB
-	---help---
-	  Say Y here if you want to use Data Center Bridging (DCB) in the
-	  driver.
-
-	  If unsure, say N.
-
-config IXGBEVF
-	tristate "Intel(R) 82599 Virtual Function Ethernet support"
-	depends on PCI_MSI
-	---help---
-	  This driver supports Intel(R) 82599 virtual functions.  For more
-	  information on how to identify your adapter, go to the Adapter &
-	  Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/sb/CS-008441.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/ixgbevf.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgbevf.  MSI-X interrupt support is required
-	  for this driver to work correctly.
-
-config IXGB
-	tristate "Intel(R) PRO/10GbE support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) PRO/10GbE family of adapters for
-	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
-	  instead. For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/ixgb.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgb.
-
-config S2IO
-	tristate "Exar Xframe 10Gb Ethernet Adapter"
-	depends on PCI
-	---help---
-	  This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/s2io.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s2io.
-
-config VXGE
-	tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
-	depends on PCI && INET
-	---help---
-	  This driver supports Exar Corp's X3100 Series 10 GbE PCIe
-	  I/O Virtualized Server Adapter.
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/vxge.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called vxge.
-
-config VXGE_DEBUG_TRACE_ALL
-	bool "Enabling All Debug trace statments in driver"
-	default n
-	depends on VXGE
-	---help---
-	  Say Y here if you want to enabling all the debug trace statements in
-	  the vxge driver. By default only few debug trace statements are
-	  enabled.
-
-config MYRI10GE
-	tristate "Myricom Myri-10G Ethernet support"
-	depends on PCI && INET
-	select FW_LOADER
-	select CRC32
-	select INET_LRO
-	---help---
-	  This driver supports Myricom Myri-10G Dual Protocol interface in
-	  Ethernet mode. If the eeprom on your board is not recent enough,
-	  you will need a newer firmware image.
-	  You may get this image or more information, at:
-
-	  <http://www.myri.com/scs/download-Myri10GE.html>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called myri10ge.
-
-config MYRI10GE_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config NETXEN_NIC
-	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
-	depends on PCI
-	select FW_LOADER
-	help
-	  This enables the support for NetXen's Gigabit Ethernet card.
-
-config NIU
-	tristate "Sun Neptune 10Gbit Ethernet support"
-	depends on PCI
-	select CRC32
-	help
-	  This enables support for cards based upon Sun's
-	  Neptune chipset.
-
-config PASEMI_MAC
-	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC_PASEMI && PCI && INET
-	select PHYLIB
-	select INET_LRO
-	help
-	  This driver supports the on-chip 1/10Gbit Ethernet controller on
-	  PA Semi's PWRficient line of chips.
-
-config MLX4_EN
-	tristate "Mellanox Technologies 10Gbit Ethernet support"
-	depends on PCI && INET
-	select MLX4_CORE
-	select INET_LRO
-	help
-	  This driver supports Mellanox Technologies ConnectX Ethernet
-	  devices.
-
-config MLX4_CORE
-	tristate
-	depends on PCI
-	default n
-
-config MLX4_DEBUG
-	bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
-	depends on MLX4_CORE
-	default y
-	---help---
-	  This option causes debugging code to be compiled into the
-	  mlx4_core driver.  The output can be turned on via the
-	  debug_level module parameter (which can also be set after
-	  the driver is loaded through sysfs).
-
-config TEHUTI
-	tristate "Tehuti Networks 10G Ethernet"
-	depends on PCI
-	help
-	  Tehuti Networks 10G Ethernet NIC
-
-config BNX2X
-	tristate "Broadcom NetXtremeII 10Gb support"
-	depends on PCI
-	select FW_LOADER
-	select ZLIB_INFLATE
-	select LIBCRC32C
-	select MDIO
-	help
-	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
-	  To compile this driver as a module, choose M here: the module
-	  will be called bnx2x.  This is recommended.
-
-config QLCNIC
-	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
-	depends on PCI
-	select FW_LOADER
-	help
-	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
-	  devices.
-
-config QLGE
-	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
-	depends on PCI
-	help
-	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called qlge.
-
-config BNA
-	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
-	depends on PCI
-	---help---
-	  This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
-	  cards.
-	  To compile this driver as a module, choose M here: the module
-	  will be called bna.
-
-	  For general information and support, go to the Brocade support
-	  website at:
-
-	  <http://support.brocade.com>
-
-source "drivers/net/sfc/Kconfig"
-
-source "drivers/net/benet/Kconfig"
-
-endif # NETDEV_10000
-
-source "drivers/net/tokenring/Kconfig"
-
-source "drivers/net/wireless/Kconfig"
-
-source "drivers/net/wimax/Kconfig"
-
-source "drivers/net/usb/Kconfig"
-
-source "drivers/net/pcmcia/Kconfig"
-
-source "drivers/net/wan/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-source "drivers/ieee802154/Kconfig"
-
-source "drivers/s390/net/Kconfig"
-
-source "drivers/net/caif/Kconfig"
-
-config TILE_NET
-	tristate "Tilera GBE/XGBE network driver support"
-	depends on TILE
-	default y
-	select CRC32
-	help
-	  This is a standard Linux network device driver for the
-	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called tile_net.
-
-config XEN_NETDEV_FRONTEND
-	tristate "Xen network device frontend driver"
-	depends on XEN
-	select XEN_XENBUS_FRONTEND
-	default y
-	help
-	  This driver provides support for Xen paravirtual network
-	  devices exported by a Xen network driver domain (often
-	  domain 0).
-
-	  The corresponding Linux backend driver is enabled by the
-	  CONFIG_XEN_NETDEV_BACKEND option.
-
-	  If you are compiling a kernel for use as Xen guest, you
-	  should say Y here. To compile this driver as a module, chose
-	  M here: the module will be called xen-netfront.
-
-config XEN_NETDEV_BACKEND
-	tristate "Xen backend network device"
-	depends on XEN_BACKEND
-	help
-	  This driver allows the kernel to act as a Xen network driver
-	  domain which exports paravirtual network devices to other
-	  Xen domains. These devices can be accessed by any operating
-	  system that implements a compatible front end.
-
-	  The corresponding Linux frontend driver is enabled by the
-	  CONFIG_XEN_NETDEV_FRONTEND configuration option.
-
-	  The backend driver presents a standard network device
-	  endpoint for each paravirtual network device to the driver
-	  domain network stack. These can then be bridged or routed
-	  etc in order to provide full network connectivity.
+	  The backend driver presents a standard network device
+	  endpoint for each paravirtual network device to the driver
+	  domain network stack. These can then be bridged or routed
+	  etc in order to provide full network connectivity.
 
 	  If you are compiling a kernel to run in a Xen network driver
 	  domain (often this is domain 0) you should say Y here. To
 	  compile this driver as a module, chose M here: the module
 	  will be called xen-netback.
 
-config ISERIES_VETH
-	tristate "iSeries Virtual Ethernet driver support"
-	depends on PPC_ISERIES
-
-config RIONET
-	tristate "RapidIO Ethernet over messaging driver support"
-	depends on RAPIDIO
-
-config RIONET_TX_SIZE
-	int "Number of outbound queue entries"
-	depends on RIONET
-	default "128"
-
-config RIONET_RX_SIZE
-	int "Number of inbound queue entries"
-	depends on RIONET
-	default "128"
-
-config FDDI
-	tristate "FDDI driver support"
-	depends on (PCI || EISA || TC)
-	help
-	  Fiber Distributed Data Interface is a high speed local area network
-	  design; essentially a replacement for high speed Ethernet. FDDI can
-	  run over copper or fiber. If you are connected to such a network and
-	  want a driver for the FDDI card in your computer, say Y here (and
-	  then also Y to the driver for your FDDI card, below). Most people
-	  will say N.
-
-config DEFXX
-	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
-	depends on FDDI && (PCI || EISA || TC)
-	---help---
-	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
-	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
-	  to a local FDDI network.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called defxx.  If unsure, say N.
-
-config DEFXX_MMIO
-	bool
-	prompt "Use MMIO instead of PIO" if PCI || EISA
-	depends on DEFXX
-	default n if PCI || EISA
-	default y
-	---help---
-	  This instructs the driver to use EISA or PCI memory-mapped I/O
-	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
-	  Enabling this gives an improvement in processing time in parts
-	  of the driver, but it may cause problems with EISA (DEFEA)
-	  adapters.  TURBOchannel does not have the concept of I/O ports,
-	  so MMIO is always used for these (DEFTA) adapters.
-
-	  If unsure, say N.
-
-config SKFP
-	tristate "SysKonnect FDDI PCI support"
-	depends on FDDI && PCI
-	select BITREVERSE
-	---help---
-	  Say Y here if you have a SysKonnect FDDI PCI adapter.
-	  The following adapters are supported by this driver:
-	  - SK-5521 (SK-NET FDDI-UP)
-	  - SK-5522 (SK-NET FDDI-UP DAS)
-	  - SK-5541 (SK-NET FDDI-FP)
-	  - SK-5543 (SK-NET FDDI-LP)
-	  - SK-5544 (SK-NET FDDI-LP DAS)
-	  - SK-5821 (SK-NET FDDI-UP64)
-	  - SK-5822 (SK-NET FDDI-UP64 DAS)
-	  - SK-5841 (SK-NET FDDI-FP64)
-	  - SK-5843 (SK-NET FDDI-LP64)
-	  - SK-5844 (SK-NET FDDI-LP64 DAS)
-	  - Netelligent 100 FDDI DAS Fibre SC
-	  - Netelligent 100 FDDI SAS Fibre SC
-	  - Netelligent 100 FDDI DAS UTP
-	  - Netelligent 100 FDDI SAS UTP
-	  - Netelligent 100 FDDI SAS Fibre MIC
-
-	  Read <file:Documentation/networking/skfp.txt> for information about
-	  the driver.
-
-	  Questions concerning this driver can be addressed to:
-	  <linux@syskonnect.de>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skfp.  This is recommended.
-
-config HIPPI
-	bool "HIPPI driver support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && INET && PCI
-	help
-	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
-	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
-	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
-	  single-mode). HIPPI networks are commonly used for clusters and to
-	  connect to super computers. If you are connected to a HIPPI network
-	  and have a HIPPI network card in your computer that you want to use
-	  under Linux, say Y here (you must also remember to enable the driver
-	  for your HIPPI card below). Most people will say N here.
-
-config ROADRUNNER
-	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
-	depends on HIPPI && PCI
-	help
-	  Say Y here if this is your PCI HIPPI network card.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called rrunner.  If unsure, say N.
-
-config ROADRUNNER_LARGE_RINGS
-	bool "Use large TX/RX rings (EXPERIMENTAL)"
-	depends on ROADRUNNER
-	help
-	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
-	  of additional memory to allow for fastest operation, both for
-	  transmitting and receiving. This memory cannot be used by any other
-	  kernel code or by user space programs. Say Y here only if you have
-	  the memory.
-
-config PLIP
-	tristate "PLIP (parallel port) support"
-	depends on PARPORT
-	---help---
-	  PLIP (Parallel Line Internet Protocol) is used to create a
-	  reasonably fast mini network consisting of two (or, rarely, more)
-	  local machines.  A PLIP link from a Linux box is a popular means to
-	  install a Linux distribution on a machine which doesn't have a
-	  CD-ROM drive (a minimal system has to be transferred with floppies
-	  first). The kernels on both machines need to have this PLIP option
-	  enabled for this to work.
-
-	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
-	  ports (the connectors at the computers with 25 holes) are connected
-	  with "null printer" or "Turbo Laplink" cables which can transmit 4
-	  bits at a time (mode 0) or with special PLIP cables, to be used on
-	  bidirectional parallel ports only, which can transmit 8 bits at a
-	  time (mode 1); you can find the wiring of these cables in
-	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
-	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
-	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
-	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
-	  and winsock or NCSA's telnet.
-
-	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
-	  as the NET-3-HOWTO, both available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
-	  protocol has been changed and this PLIP driver won't work together
-	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
-	  your kernel by about 8 KB.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called plip. If unsure, say Y or M, in case you buy
-	  a laptop later.
-
-config PPP
-	tristate "PPP (point-to-point protocol) support"
-	select SLHC
-	---help---
-	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
-	  the same purpose: sending Internet traffic over telephone (and other
-	  serial) lines.  Ask your access provider if they support it, because
-	  otherwise you can't use it; most Internet access providers these
-	  days support PPP rather than SLIP.
-
-	  To use PPP, you need an additional program called pppd as described
-	  in the PPP-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
-	  the version of pppd recommended in <file:Documentation/Changes>.
-	  The PPP option enlarges your kernel by about 16 KB.
-
-	  There are actually two versions of PPP: the traditional PPP for
-	  asynchronous lines, such as regular analog phone lines, and
-	  synchronous PPP which can be used over digital ISDN lines for
-	  example.  If you want to use PPP over phone lines or other
-	  asynchronous serial lines, you need to say Y (or M) here and also to
-	  the next option, "PPP support for async serial ports".  For PPP over
-	  synchronous lines, you should say Y (or M) here and to "Support
-	  synchronous PPP", below.
-
-	  If you said Y to "Version information on all symbols" above, then
-	  you cannot compile the PPP driver into the kernel; you can then only
-	  compile it as a module. To compile this driver as a module, choose M
-	  here. The module will be called ppp_generic.
-
-config PPP_MULTILINK
-	bool "PPP multilink support (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	help
-	  PPP multilink is a protocol (defined in RFC 1990) which allows you
-	  to combine several (logical or physical) lines into one logical PPP
-	  connection, so that you can utilize your full bandwidth.
-
-	  This has to be supported at the other end as well and you need a
-	  version of the pppd daemon which understands the multilink protocol.
-
-	  If unsure, say N.
-
-config PPP_FILTER
-	bool "PPP filtering"
-	depends on PPP
-	help
-	  Say Y here if you want to be able to filter the packets passing over
-	  PPP interfaces.  This allows you to control which packets count as
-	  activity (i.e. which packets will reset the idle timer or bring up
-	  a demand-dialed link) and which packets are to be dropped entirely.
-	  You need to say Y here if you wish to use the pass-filter and
-	  active-filter options to pppd.
-
-	  If unsure, say N.
-
-config PPP_ASYNC
-	tristate "PPP support for async serial ports"
-	depends on PPP
-	select CRC_CCITT
-	---help---
-	  Say Y (or M) here if you want to be able to use PPP over standard
-	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
-	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
-	  need this option.
-
-	  To compile this driver as a module, choose M here.
-
-	  If unsure, say Y.
-
-config PPP_SYNC_TTY
-	tristate "PPP support for sync tty ports"
-	depends on PPP
-	help
-	  Say Y (or M) here if you want to be able to use PPP over synchronous
-	  (HDLC) tty devices, such as the SyncLink adapter. These devices
-	  are often used for high-speed leased lines like T1/E1.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_DEFLATE
-	tristate "PPP Deflate compression"
-	depends on PPP
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	---help---
-	  Support for the Deflate compression method for PPP, which uses the
-	  Deflate algorithm (the same algorithm that gzip uses) to compress
-	  each PPP packet before it is sent over the wire.  The machine at the
-	  other end of the PPP link (usually your ISP) has to support the
-	  Deflate compression method as well for this to be useful.  Even if
-	  they don't support it, it is safe to say Y here.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_BSDCOMP
-	tristate "PPP BSD-Compress compression"
-	depends on PPP
-	---help---
-	  Support for the BSD-Compress compression method for PPP, which uses
-	  the LZW compression method to compress each PPP packet before it is
-	  sent over the wire. The machine at the other end of the PPP link
-	  (usually your ISP) has to support the BSD-Compress compression
-	  method as well for this to be useful. Even if they don't support it,
-	  it is safe to say Y here.
-
-	  The PPP Deflate compression method ("PPP Deflate compression",
-	  above) is preferable to BSD-Compress, because it compresses better
-	  and is patent-free.
-
-	  Note that the BSD compression code will always be compiled as a
-	  module; it is called bsd_comp and will show up in the directory
-	  modules once you have said "make modules". If unsure, say N.
-
-config PPP_MPPE
-	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	select CRYPTO
-	select CRYPTO_SHA1
-	select CRYPTO_ARC4
-	select CRYPTO_ECB
-	---help---
-	  Support for the MPPE Encryption protocol, as employed by the
-	  Microsoft Point-to-Point Tunneling Protocol.
-
-	  See http://pptpclient.sourceforge.net/ for information on
-	  configuring PPTP clients and servers to utilize this method.
-
-config PPPOE
-	tristate "PPP over Ethernet (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP
-	help
-	  Support for PPP over Ethernet.
-
-	  This driver requires the latest version of pppd from the CVS
-	  repository at cvs.samba.org.  Alternatively, see the 
-	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-	  which contains instruction on how to use this driver (under 
-	  the heading "Kernel mode PPPoE").
-
-config PPTP
-	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
-	help
-	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
-
-	  This driver requires pppd plugin to work in client mode or
-	  modified pptpd (poptop) to work in server mode.
-	  See http://accel-pptp.sourceforge.net/ for information how to
-	  utilize this module.
-
-config PPPOATM
-	tristate "PPP over ATM"
-	depends on ATM && PPP
-	help
-	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
-	  This implementation does not yet comply with section 8 of RFC2364,
-	  which can lead to bad results if the ATM peer loses state and
-	  changes its encapsulation unilaterally.
-
-config PPPOL2TP
-	tristate "PPP over L2TP (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && L2TP && PPP
-	help
-	  Support for PPP-over-L2TP socket family. L2TP is a protocol
-	  used by ISPs and enterprises to tunnel PPP traffic over UDP
-	  tunnels. L2TP is replacing PPTP for VPN uses.
-
-config SLIP
-	tristate "SLIP (serial line) support"
-	---help---
-	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
-	  connect to your Internet service provider or to connect to some
-	  other local Unix box or if you want to configure your Linux box as a
-	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
-	  Internet Protocol) is a protocol used to send Internet traffic over
-	  serial connections such as telephone lines or null modem cables;
-	  nowadays, the protocol PPP is more commonly used for this same
-	  purpose.
-
-	  Normally, your access provider has to support SLIP in order for you
-	  to be able to use it, but there is now a SLIP emulator called SLiRP
-	  around (available from
-	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-	  allows you to use SLIP over a regular dial up shell connection. If
-	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
-	  NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, explains how to
-	  configure SLIP. Note that you don't need this option if you just
-	  want to run term (term is a program which gives you almost full
-	  Internet connectivity if you have a regular dial up shell account on
-	  some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
-	  support will enlarge your kernel by about 4 KB. If unsure, say N.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called slip.
-
-config SLIP_COMPRESSED
-	bool "CSLIP compressed headers"
-	depends on SLIP
-	select SLHC
-	---help---
-	  This protocol is faster than SLIP because it uses compression on the
-	  TCP/IP headers (not on the data itself), but it has to be supported
-	  on both ends. Ask your access provider if you are not sure and
-	  answer Y, just in case. You will still be able to use plain SLIP. If
-	  you plan to use SLiRP, the SLIP emulator (available from
-	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-	  allows you to use SLIP over a regular dial up shell connection, you
-	  definitely want to say Y here. The NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, explains how to configure
-	  CSLIP. This won't enlarge your kernel.
-
-config SLHC
-	tristate
-	help
-	  This option enables Van Jacobsen serial line header compression
-	  routines.
-
-config SLIP_SMART
-	bool "Keepalive and linefill"
-	depends on SLIP
-	help
-	  Adds additional capabilities to the SLIP driver to support the
-	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
-	  analogue lines.
-
-config SLIP_MODE_SLIP6
-	bool "Six bit SLIP encapsulation"
-	depends on SLIP
-	help
-	  Just occasionally you may need to run IP over hostile serial
-	  networks that don't pass all control characters or are only seven
-	  bit. Saying Y here adds an extra mode you can use with SLIP:
-	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
-	  the serial device. Naturally, this has to be supported at the other
-	  end of the link as well. It's good enough, for example, to run IP
-	  over the async ports of a Camtec JNT Pad. If unsure, say N.
-
-config NET_FC
-	bool "Fibre Channel driver support"
-	depends on SCSI && PCI
-	help
-	  Fibre Channel is a high speed serial protocol mainly used to connect
-	  large storage devices to the computer; it is compatible with and
-	  intended to replace SCSI.
-
-	  If you intend to use Fibre Channel, you need to have a Fibre channel
-	  adaptor card in your computer; say Y here and to the driver for your
-	  adaptor below. You also should have said Y to "SCSI support" and
-	  "SCSI generic support".
-
-config NETCONSOLE
-	tristate "Network console logging support"
-	---help---
-	If you want to log kernel messages over the network, enable this.
-	See <file:Documentation/networking/netconsole.txt> for details.
-
-config NETCONSOLE_DYNAMIC
-	bool "Dynamic reconfiguration of logging targets"
-	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
-			!(NETCONSOLE=y && CONFIGFS_FS=m)
-	help
-	  This option enables the ability to dynamically reconfigure target
-	  parameters (interface, IP addresses, port numbers, MAC addresses)
-	  at runtime through a userspace interface exported using configfs.
-	  See <file:Documentation/networking/netconsole.txt> for details.
-
-config NETPOLL
-	def_bool NETCONSOLE
-
-config NETPOLL_TRAP
-	bool "Netpoll traffic trapping"
-	default n
-	depends on NETPOLL
-
-config NET_POLL_CONTROLLER
-	def_bool NETPOLL
-
-config VIRTIO_NET
-	tristate "Virtio network driver (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIRTIO
-	---help---
-	  This is the virtual network driver for virtio.  It can be used with
-	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
-
 config VMXNET3
 	tristate "VMware VMXNET3 ethernet driver"
 	depends on PCI && INET

drivers/net/Makefile

@@ -1,278 +1,61 @@
 #
-# Makefile for the Linux network (ethercard) device drivers.
+# Makefile for the Linux network device drivers.
 #
 
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-
-obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
-obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
-obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-
-obj-$(CONFIG_E1000) += e1000/
-obj-$(CONFIG_E1000E) += e1000e/
-obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
-obj-$(CONFIG_IGB) += igb/
-obj-$(CONFIG_IGBVF) += igbvf/
-obj-$(CONFIG_IXGBE) += ixgbe/
-obj-$(CONFIG_IXGBEVF) += ixgbevf/
-obj-$(CONFIG_IXGB) += ixgb/
-obj-$(CONFIG_IP1000) += ipg.o
-obj-$(CONFIG_CHELSIO_T1) += chelsio/
-obj-$(CONFIG_CHELSIO_T3) += cxgb3/
-obj-$(CONFIG_CHELSIO_T4) += cxgb4/
-obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
-obj-$(CONFIG_EHEA) += ehea/
-obj-$(CONFIG_CAN) += can/
-obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_ATL1) += atlx/
-obj-$(CONFIG_ATL2) += atlx/
-obj-$(CONFIG_ATL1E) += atl1e/
-obj-$(CONFIG_ATL1C) += atl1c/
-obj-$(CONFIG_GIANFAR) += gianfar_driver.o
-obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
-obj-$(CONFIG_TEHUTI) += tehuti.o
-obj-$(CONFIG_ENIC) += enic/
-obj-$(CONFIG_JME) += jme.o
-obj-$(CONFIG_BE2NET) += benet/
-obj-$(CONFIG_VMXNET3) += vmxnet3/
-obj-$(CONFIG_BNA) += bna/
-
-gianfar_driver-objs := gianfar.o \
-		gianfar_ethtool.o \
-		gianfar_sysfs.o
-
-obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
-ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
-
-obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
-
-#
-# link order important here
 #
-obj-$(CONFIG_PLIP) += plip.o
-
-obj-$(CONFIG_ROADRUNNER) += rrunner.o
-
-obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-obj-$(CONFIG_SUNLANCE) += sunlance.o
-obj-$(CONFIG_SUNQE) += sunqe.o
-obj-$(CONFIG_SUNBMAC) += sunbmac.o
-obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
-obj-$(CONFIG_CASSINI) += cassini.o
-obj-$(CONFIG_SUNVNET) += sunvnet.o
-
-obj-$(CONFIG_MACE) += mace.o
-obj-$(CONFIG_BMAC) += bmac.o
-
-obj-$(CONFIG_VORTEX) += 3c59x.o
-obj-$(CONFIG_TYPHOON) += typhoon.o
-obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_PCNET32) += pcnet32.o
-obj-$(CONFIG_E100) += e100.o
-obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_EPIC100) += epic100.o
-obj-$(CONFIG_SMSC9420) += smsc9420.o
-obj-$(CONFIG_SIS190) += sis190.o
-obj-$(CONFIG_SIS900) += sis900.o
-obj-$(CONFIG_R6040) += r6040.o
-obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_ACENIC) += acenic.o
-obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
-obj-$(CONFIG_NATSEMI) += natsemi.o
-obj-$(CONFIG_NS83820) += ns83820.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
-obj-$(CONFIG_FEALNX) += fealnx.o
-obj-$(CONFIG_TIGON3) += tg3.o
-obj-$(CONFIG_BNX2) += bnx2.o
-obj-$(CONFIG_CNIC) += cnic.o
-obj-$(CONFIG_BNX2X) += bnx2x/
-spidernet-y += spider_net.o spider_net_ethtool.o
-obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
-obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
-gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
-ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
-obj-$(CONFIG_TC35815) += tc35815.o
-obj-$(CONFIG_SKGE) += skge.o
-obj-$(CONFIG_SKY2) += sky2.o
-obj-$(CONFIG_SKFP) += skfp/
-obj-$(CONFIG_KS8842)	+= ks8842.o
-obj-$(CONFIG_KS8851)	+= ks8851.o
-obj-$(CONFIG_KS8851_MLL)	+= ks8851_mll.o
-obj-$(CONFIG_KSZ884X_PCI)	+= ksz884x.o
-obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
-obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
-obj-$(CONFIG_RIONET) += rionet.o
-obj-$(CONFIG_SH_ETH) += sh_eth.o
-obj-$(CONFIG_STMMAC_ETH) += stmmac/
-
+# Networking Core Drivers
 #
-# end link order section
-#
-
-obj-$(CONFIG_SUNDANCE) += sundance.o
-obj-$(CONFIG_HAMACHI) += hamachi.o
-obj-$(CONFIG_NET) += Space.o loopback.o
-obj-$(CONFIG_SEEQ8005) += seeq8005.o
-obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o
-obj-$(CONFIG_APNE) += apne.o 8390.o
-obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
-obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_SMC9194) += smc9194.o
-obj-$(CONFIG_FEC) += fec.o
-obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
-ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
-	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
-endif
-obj-$(CONFIG_WD80x3) += wd.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_NE2000) += ne.o 8390p.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
-obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_ES3210) += es3210.o 8390.o
-obj-$(CONFIG_LNE390) += lne390.o 8390.o
-obj-$(CONFIG_NE3210) += ne3210.o 8390.o
-obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
-obj-$(CONFIG_B44) += b44.o
-obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o
-obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
-obj-$(CONFIG_FTMAC100) += ftmac100.o
-
-obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
-obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
-ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
-obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
-obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-obj-$(CONFIG_QLA3XXX) += qla3xxx.o
-obj-$(CONFIG_QLCNIC) += qlcnic/
-obj-$(CONFIG_QLGE) += qlge/
-
-obj-$(CONFIG_PPP) += ppp_generic.o
-obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
-obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
-obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
-obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
-obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-obj-$(CONFIG_PPPOL2TP) += pppox.o
-obj-$(CONFIG_PPTP) += pppox.o pptp.o
-
-obj-$(CONFIG_SLIP) += slip.o
-obj-$(CONFIG_SLHC) += slhc.o
-
-obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
-obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
-
+obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_DUMMY) += dummy.o
+obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
-obj-$(CONFIG_LANCE) += lance.o
-obj-$(CONFIG_SUN3_82586) += sun3_82586.o
-obj-$(CONFIG_SUN3LANCE) += sun3lance.o
-obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_SGISEEQ) += sgiseeq.o
-obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
-obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_EL1) += 3c501.o
-obj-$(CONFIG_EL16) += 3c507.o
-obj-$(CONFIG_ELMC) += 3c523.o
-obj-$(CONFIG_IBMLANA) += ibmlana.o
-obj-$(CONFIG_ELMC_II) += 3c527.o
-obj-$(CONFIG_EL3) += 3c509.o
-obj-$(CONFIG_3C515) += 3c515.o
-obj-$(CONFIG_EEXPRESS) += eexpress.o
-obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
-obj-$(CONFIG_8139CP) += 8139cp.o
-obj-$(CONFIG_8139TOO) += 8139too.o
-obj-$(CONFIG_ZNET) += znet.o
-obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_DEPCA) += depca.o
-obj-$(CONFIG_EWRK3) += ewrk3.o
-obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_NI5010) += ni5010.o
-obj-$(CONFIG_NI52) += ni52.o
-obj-$(CONFIG_NI65) += ni65.o
-obj-$(CONFIG_ELPLUS) += 3c505.o
-obj-$(CONFIG_AC3200) += ac3200.o 8390.o
-obj-$(CONFIG_APRICOT) += 82596.o
-obj-$(CONFIG_LASI_82596) += lasi_82596.o
-obj-$(CONFIG_SNI_82596) += sni_82596.o
-obj-$(CONFIG_MVME16x_NET) += 82596.o
-obj-$(CONFIG_BVME6000_NET) += 82596.o
-obj-$(CONFIG_SC92031) += sc92031.o
-
-# This is also a 82596 and should probably be merged
-obj-$(CONFIG_LP486E) += lp486e.o
-
-obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o
-obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
-obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
-obj-$(CONFIG_EQUALIZER) += eql.o
-obj-$(CONFIG_KORINA) += korina.o
-obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_DECLANCE) += declance.o
-obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o
-obj-$(CONFIG_ARIADNE) += ariadne.o
-obj-$(CONFIG_CS89x0) += cs89x0.o
-obj-$(CONFIG_MACSONIC) += macsonic.o
-obj-$(CONFIG_MACMACE) += macmace.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_NET) += Space.o loopback.o
+obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_PHYLIB) += phy/
+obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
-obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
-obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-obj-$(CONFIG_IBMVETH) += ibmveth.o
-obj-$(CONFIG_S2IO) += s2io.o
-obj-$(CONFIG_VXGE) += vxge/
-obj-$(CONFIG_MYRI10GE) += myri10ge/
-obj-$(CONFIG_SMC91X) += smc91x.o
-obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SMSC911X) += smsc911x.o
-obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
-obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
-obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
-pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
-obj-$(CONFIG_MLX4_CORE) += mlx4/
-obj-$(CONFIG_ENC28J60) += enc28j60.o
-obj-$(CONFIG_ETHOC) += ethoc.o
-obj-$(CONFIG_GRETH) += greth.o
-obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-
-obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
-
-obj-$(CONFIG_DNET) += dnet.o
-obj-$(CONFIG_MACB) += macb.o
-obj-$(CONFIG_S6GMAC) += s6gmac.o
+obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 
-obj-$(CONFIG_ARM) += arm/
+#
+# Networking Drivers
+#
+obj-$(CONFIG_ARCNET) += arcnet/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_CAIF) += caif/
+obj-$(CONFIG_CAN) += can/
+obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+obj-$(CONFIG_ETHERNET) += ethernet/
+obj-$(CONFIG_FDDI) += fddi/
+obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_HAMRADIO) += hamradio/
+obj-$(CONFIG_IRDA) += irda/
+obj-$(CONFIG_PLIP) += plip/
+obj-$(CONFIG_PPP) += ppp/
+obj-$(CONFIG_PPP_ASYNC) += ppp/
+obj-$(CONFIG_PPP_BSDCOMP) += ppp/
+obj-$(CONFIG_PPP_DEFLATE) += ppp/
+obj-$(CONFIG_PPP_MPPE) += ppp/
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
+obj-$(CONFIG_PPPOE) += ppp/
+obj-$(CONFIG_PPPOL2TP) += ppp/
+obj-$(CONFIG_PPTP) += ppp/
+obj-$(CONFIG_SLIP) += slip/
+obj-$(CONFIG_SLHC) += slip/
+obj-$(CONFIG_NET_SB1000) += sb1000.o
+obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
-obj-$(CONFIG_ARCNET) += arcnet/
-obj-$(CONFIG_NET_PCMCIA) += pcmcia/
+obj-$(CONFIG_WLAN) += wireless/
+obj-$(CONFIG_WIMAX) += wimax/
+
+obj-$(CONFIG_VMXNET3) += vmxnet3/
+obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
 
 obj-$(CONFIG_USB_CATC)          += usb/
 obj-$(CONFIG_USB_KAWETH)        += usb/
@@ -283,26 +66,3 @@ obj-$(CONFIG_USB_USBNET)        += usb/
 obj-$(CONFIG_USB_ZD1201)        += usb/
 obj-$(CONFIG_USB_IPHETH)        += usb/
 obj-$(CONFIG_USB_CDC_PHONET)   += usb/
-
-obj-$(CONFIG_WLAN) += wireless/
-obj-$(CONFIG_NET_TULIP) += tulip/
-obj-$(CONFIG_HAMRADIO) += hamradio/
-obj-$(CONFIG_IRDA) += irda/
-obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
-
-obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-obj-$(CONFIG_FS_ENET) += fs_enet/
-
-obj-$(CONFIG_NETXEN_NIC) += netxen/
-obj-$(CONFIG_NIU) += niu.o
-obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
-obj-$(CONFIG_SFC) += sfc/
-
-obj-$(CONFIG_WIMAX) += wimax/
-obj-$(CONFIG_CAIF) += caif/
-
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
-obj-$(CONFIG_PCH_GBE) += pch_gbe/
-obj-$(CONFIG_TILE_NET) += tile/

drivers/net/appletalk/cops.c

@@ -264,7 +264,7 @@ static const struct net_device_ops cops_netdev_ops = {
 	.ndo_start_xmit   	= cops_send_packet,
 	.ndo_tx_timeout		= cops_timeout,
         .ndo_do_ioctl           = cops_ioctl,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 };
 
 /*

drivers/net/appletalk/ltpc.c

@@ -1014,7 +1014,7 @@ static int __init ltpc_probe_dma(int base, int dma)
 static const struct net_device_ops ltpc_netdev = {
 	.ndo_start_xmit		= ltpc_xmit,
 	.ndo_do_ioctl		= ltpc_ioctl,
-	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_set_rx_mode	= set_multicast_list,
 };
 
 struct net_device * __init ltpc_probe(void)

drivers/net/arcnet/Kconfig

@@ -3,8 +3,8 @@
 #
 
 menuconfig ARCNET
-	depends on NETDEVICES && (ISA || PCI)
-	tristate "ARCnet support"
+	depends on NETDEVICES && (ISA || PCI || PCMCIA)
+	bool "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in
@@ -123,4 +123,14 @@ config ARCNET_COM20020_PCI
 	tristate "Support for COM20020 on PCI"
 	depends on ARCNET_COM20020 && PCI
 
+config ARCNET_COM20020_CS
+	tristate "COM20020 ARCnet PCMCIA support"
+	depends on ARCNET_COM20020 && PCMCIA
+	help
+	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
+	  to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called com20020_cs.  If unsure, say N.
+
 endif # ARCNET

drivers/net/arcnet/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_ARCNET_RIM_I) += arc-rimi.o
 obj-$(CONFIG_ARCNET_COM20020) += com20020.o
 obj-$(CONFIG_ARCNET_COM20020_ISA) += com20020-isa.o
 obj-$(CONFIG_ARCNET_COM20020_PCI) += com20020-pci.o
+obj-$(CONFIG_ARCNET_COM20020_CS) += com20020_cs.o

drivers/net/arcnet/com20020.c

@@ -154,7 +154,7 @@ const struct net_device_ops com20020_netdev_ops = {
 	.ndo_stop	= arcnet_close,
 	.ndo_start_xmit = arcnet_send_packet,
 	.ndo_tx_timeout = arcnet_timeout,
-	.ndo_set_multicast_list = com20020_set_mc_list,
+	.ndo_set_rx_mode = com20020_set_mc_list,
 };
 
 /* Set up the struct net_device associated with this card.  Called after

drivers/net/arm/Kconfig

@@ -1,74 +0,0 @@
-#
-# Acorn Network device configuration
-#  These are for Acorn's Expansion card network interfaces
-#
-config ARM_AM79C961A
-	bool "ARM EBSA110 AM79C961A support"
-	depends on ARM && ARCH_EBSA110
-	select CRC32
-	help
-	  If you wish to compile a kernel for the EBSA-110, then you should
-	  always answer Y to this.
-
-config ARM_ETHER1
-	tristate "Acorn Ether1 support"
-	depends on ARM && ARCH_ACORN
-	help
-	  If you have an Acorn system with one of these (AKA25) network cards,
-	  you should say Y to this option if you wish to use it with Linux.
-
-config ARM_ETHER3
-	tristate "Acorn/ANT Ether3 support"
-	depends on ARM && ARCH_ACORN
-	help
-	  If you have an Acorn system with one of these network cards, you
-	  should say Y to this option if you wish to use it with Linux.
-
-config ARM_ETHERH
-	tristate "I-cubed EtherH/ANT EtherM support"
-	depends on ARM && ARCH_ACORN
-	select CRC32
-	help
-	  If you have an Acorn system with one of these network cards, you
-	  should say Y to this option if you wish to use it with Linux.
-
-config ARM_AT91_ETHER
-	tristate "AT91RM9200 Ethernet support"
-	depends on ARM && ARCH_AT91RM9200
-	select MII
-	help
-	  If you wish to compile a kernel for the AT91RM9200 and enable
-	  ethernet support, then you should always answer Y to this.
-
-config ARM_KS8695_ETHER
-	tristate "KS8695 Ethernet support"
-	depends on ARM && ARCH_KS8695
-	select MII
-	help
-	  If you wish to compile a kernel for the KS8695 and want to
-	  use the internal ethernet then you should answer Y to this.
-
-config EP93XX_ETH
-	tristate "EP93xx Ethernet support"
-	depends on ARM && ARCH_EP93XX
-	select MII
-	help
-	  This is a driver for the ethernet hardware included in EP93xx CPUs.
-	  Say Y if you are building a kernel for EP93xx based devices.
-
-config IXP4XX_ETH
-	tristate "Intel IXP4xx Ethernet support"
-	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
-	select PHYLIB
-	help
-	  Say Y here if you want to use built-in Ethernet ports
-	  on IXP4xx processor.
-
-config W90P910_ETH
-	tristate "Nuvoton w90p910 Ethernet support"
-	depends on ARM && ARCH_W90X900
-	select PHYLIB
-	select MII
-	help
-	  Say Y here if you want to use built-in Ethernet ports
-	  on w90p910 processor.

drivers/net/arm/Makefile

@@ -1,14 +0,0 @@
-# File: drivers/net/arm/Makefile
-#
-# Makefile for the ARM network device drivers
-#
-
-obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
-obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
-obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
-obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
-obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
-obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
-obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
-obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
-obj-$(CONFIG_W90P910_ETH)	+= w90p910_ether.o

drivers/net/benet/Kconfig

@@ -1,6 +0,0 @@
-config BE2NET
-	tristate "ServerEngines' 10Gbps NIC - BladeEngine"
-	depends on PCI && INET
-	help
-	This driver implements the NIC functionality for ServerEngines'
-	10Gbps network adapter - BladeEngine.

drivers/net/bna/bfa_ioc_ct.c

@@ -1,516 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-
-#include "bfa_ioc.h"
-#include "cna.h"
-#include "bfi.h"
-#include "bfi_ctreg.h"
-#include "bfa_defs.h"
-
-#define bfa_ioc_ct_sync_pos(__ioc)	\
-		((u32) (1 << bfa_ioc_pcifn(__ioc)))
-#define BFA_IOC_SYNC_REQD_SH		16
-#define bfa_ioc_ct_get_sync_ackd(__val) (__val & 0x0000ffff)
-#define bfa_ioc_ct_clear_sync_ackd(__val) (__val & 0xffff0000)
-#define bfa_ioc_ct_get_sync_reqd(__val) (__val >> BFA_IOC_SYNC_REQD_SH)
-#define bfa_ioc_ct_sync_reqd_pos(__ioc) \
-		(bfa_ioc_ct_sync_pos(__ioc) << BFA_IOC_SYNC_REQD_SH)
-
-/*
- * forward declarations
- */
-static bool bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_reg_init(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_map_port(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix);
-static void bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc);
-static bool bfa_ioc_ct_sync_start(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_sync_join(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc);
-static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc);
-static bool bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc);
-static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode);
-
-static struct bfa_ioc_hwif nw_hwif_ct;
-
-/**
- * Called from bfa_ioc_attach() to map asic specific calls.
- */
-void
-bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc)
-{
-	nw_hwif_ct.ioc_pll_init = bfa_ioc_ct_pll_init;
-	nw_hwif_ct.ioc_firmware_lock = bfa_ioc_ct_firmware_lock;
-	nw_hwif_ct.ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock;
-	nw_hwif_ct.ioc_reg_init = bfa_ioc_ct_reg_init;
-	nw_hwif_ct.ioc_map_port = bfa_ioc_ct_map_port;
-	nw_hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set;
-	nw_hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail;
-	nw_hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset;
-	nw_hwif_ct.ioc_sync_start = bfa_ioc_ct_sync_start;
-	nw_hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join;
-	nw_hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave;
-	nw_hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack;
-	nw_hwif_ct.ioc_sync_complete = bfa_ioc_ct_sync_complete;
-
-	ioc->ioc_hwif = &nw_hwif_ct;
-}
-
-/**
- * Return true if firmware of current driver matches the running firmware.
- */
-static bool
-bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc)
-{
-	enum bfi_ioc_state ioc_fwstate;
-	u32 usecnt;
-	struct bfi_ioc_image_hdr fwhdr;
-
-	/**
-	 * Firmware match check is relevant only for CNA.
-	 */
-	if (!ioc->cna)
-		return true;
-
-	/**
-	 * If bios boot (flash based) -- do not increment usage count
-	 */
-	if (bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(ioc)) <
-						BFA_IOC_FWIMG_MINSZ)
-		return true;
-
-	bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
-	usecnt = readl(ioc->ioc_regs.ioc_usage_reg);
-
-	/**
-	 * If usage count is 0, always return TRUE.
-	 */
-	if (usecnt == 0) {
-		writel(1, ioc->ioc_regs.ioc_usage_reg);
-		bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
-		writel(0, ioc->ioc_regs.ioc_fail_sync);
-		return true;
-	}
-
-	ioc_fwstate = readl(ioc->ioc_regs.ioc_fwstate);
-
-	/**
-	 * Use count cannot be non-zero and chip in uninitialized state.
-	 */
-	BUG_ON(!(ioc_fwstate != BFI_IOC_UNINIT));
-
-	/**
-	 * Check if another driver with a different firmware is active
-	 */
-	bfa_nw_ioc_fwver_get(ioc, &fwhdr);
-	if (!bfa_nw_ioc_fwver_cmp(ioc, &fwhdr)) {
-		bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
-		return false;
-	}
-
-	/**
-	 * Same firmware version. Increment the reference count.
-	 */
-	usecnt++;
-	writel(usecnt, ioc->ioc_regs.ioc_usage_reg);
-	bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
-	return true;
-}
-
-static void
-bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc)
-{
-	u32 usecnt;
-
-	/**
-	 * Firmware lock is relevant only for CNA.
-	 */
-	if (!ioc->cna)
-		return;
-
-	/**
-	 * If bios boot (flash based) -- do not decrement usage count
-	 */
-	if (bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(ioc)) <
-						BFA_IOC_FWIMG_MINSZ)
-		return;
-
-	/**
-	 * decrement usage count
-	 */
-	bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
-	usecnt = readl(ioc->ioc_regs.ioc_usage_reg);
-	BUG_ON(!(usecnt > 0));
-
-	usecnt--;
-	writel(usecnt, ioc->ioc_regs.ioc_usage_reg);
-
-	bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
-}
-
-/**
- * Notify other functions on HB failure.
- */
-static void
-bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc)
-{
-	if (ioc->cna) {
-		writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt);
-		writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt);
-		/* Wait for halt to take effect */
-		readl(ioc->ioc_regs.ll_halt);
-		readl(ioc->ioc_regs.alt_ll_halt);
-	} else {
-		writel(__PSS_ERR_STATUS_SET, ioc->ioc_regs.err_set);
-		readl(ioc->ioc_regs.err_set);
-	}
-}
-
-/**
- * Host to LPU mailbox message addresses
- */
-static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = {
-	{ HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 },
-	{ HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 },
-	{ HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2 },
-	{ HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3 }
-};
-
-/**
- * Host <-> LPU mailbox command/status registers - port 0
- */
-static struct { u32 hfn, lpu; } iocreg_mbcmd_p0[] = {
-	{ HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT },
-	{ HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT },
-	{ HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT },
-	{ HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT }
-};
-
-/**
- * Host <-> LPU mailbox command/status registers - port 1
- */
-static struct { u32 hfn, lpu; } iocreg_mbcmd_p1[] = {
-	{ HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT },
-	{ HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT },
-	{ HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT },
-	{ HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT }
-};
-
-static void
-bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
-{
-	void __iomem *rb;
-	int		pcifn = bfa_ioc_pcifn(ioc);
-
-	rb = bfa_ioc_bar0(ioc);
-
-	ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
-	ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
-	ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
-
-	if (ioc->port_id == 0) {
-		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
-		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
-		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG;
-		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
-		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
-		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
-		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
-	} else {
-		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
-		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
-		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG;
-		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
-		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
-		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
-		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
-	}
-
-	/*
-	 * PSS control registers
-	 */
-	ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
-	ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
-	ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
-	ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
-
-	/*
-	 * IOC semaphore registers and serialization
-	 */
-	ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
-	ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
-	ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG);
-	ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
-	ioc->ioc_regs.ioc_fail_sync = (rb + BFA_IOC_FAIL_SYNC);
-
-	/**
-	 * sram memory access
-	 */
-	ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
-	ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
-
-	/*
-	 * err set reg : for notification of hb failure in fcmode
-	 */
-	ioc->ioc_regs.err_set = (rb + ERR_SET_REG);
-}
-
-/**
- * Initialize IOC to port mapping.
- */
-
-#define FNC_PERS_FN_SHIFT(__fn)	((__fn) * 8)
-static void
-bfa_ioc_ct_map_port(struct bfa_ioc *ioc)
-{
-	void __iomem *rb = ioc->pcidev.pci_bar_kva;
-	u32	r32;
-
-	/**
-	 * For catapult, base port id on personality register and IOC type
-	 */
-	r32 = readl(rb + FNC_PERS_REG);
-	r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc));
-	ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH;
-
-}
-
-/**
- * Set interrupt mode for a function: INTX or MSIX
- */
-static void
-bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix)
-{
-	void __iomem *rb = ioc->pcidev.pci_bar_kva;
-	u32	r32, mode;
-
-	r32 = readl(rb + FNC_PERS_REG);
-
-	mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) &
-		__F0_INTX_STATUS;
-
-	/**
-	 * If already in desired mode, do not change anything
-	 */
-	if (!msix && mode)
-		return;
-
-	if (msix)
-		mode = __F0_INTX_STATUS_MSIX;
-	else
-		mode = __F0_INTX_STATUS_INTA;
-
-	r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
-	r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
-
-	writel(r32, rb + FNC_PERS_REG);
-}
-
-/**
- * Cleanup hw semaphore and usecnt registers
- */
-static void
-bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc)
-{
-	if (ioc->cna) {
-		bfa_nw_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
-		writel(0, ioc->ioc_regs.ioc_usage_reg);
-		bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
-	}
-
-	/*
-	 * Read the hw sem reg to make sure that it is locked
-	 * before we clear it. If it is not locked, writing 1
-	 * will lock it instead of clearing it.
-	 */
-	readl(ioc->ioc_regs.ioc_sem_reg);
-	bfa_nw_ioc_hw_sem_release(ioc);
-}
-
-/**
- * Synchronized IOC failure processing routines
- */
-static bool
-bfa_ioc_ct_sync_start(struct bfa_ioc *ioc)
-{
-	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
-	u32 sync_reqd = bfa_ioc_ct_get_sync_reqd(r32);
-
-	/*
-	 * Driver load time.  If the sync required bit for this PCI fn
-	 * is set, it is due to an unclean exit by the driver for this
-	 * PCI fn in the previous incarnation. Whoever comes here first
-	 * should clean it up, no matter which PCI fn.
-	 */
-
-	if (sync_reqd & bfa_ioc_ct_sync_pos(ioc)) {
-		writel(0, ioc->ioc_regs.ioc_fail_sync);
-		writel(1, ioc->ioc_regs.ioc_usage_reg);
-		writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate);
-		writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate);
-		return true;
-	}
-
-	return bfa_ioc_ct_sync_complete(ioc);
-}
-/**
- * Synchronized IOC failure processing routines
- */
-static void
-bfa_ioc_ct_sync_join(struct bfa_ioc *ioc)
-{
-	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
-	u32 sync_pos = bfa_ioc_ct_sync_reqd_pos(ioc);
-
-	writel((r32 | sync_pos), ioc->ioc_regs.ioc_fail_sync);
-}
-
-static void
-bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc)
-{
-	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
-	u32 sync_msk = bfa_ioc_ct_sync_reqd_pos(ioc) |
-					bfa_ioc_ct_sync_pos(ioc);
-
-	writel((r32 & ~sync_msk), ioc->ioc_regs.ioc_fail_sync);
-}
-
-static void
-bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc)
-{
-	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
-
-	writel((r32 | bfa_ioc_ct_sync_pos(ioc)), ioc->ioc_regs.ioc_fail_sync);
-}
-
-static bool
-bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc)
-{
-	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
-	u32 sync_reqd = bfa_ioc_ct_get_sync_reqd(r32);
-	u32 sync_ackd = bfa_ioc_ct_get_sync_ackd(r32);
-	u32 tmp_ackd;
-
-	if (sync_ackd == 0)
-		return true;
-
-	/**
-	 * The check below is to see whether any other PCI fn
-	 * has reinitialized the ASIC (reset sync_ackd bits)
-	 * and failed again while this IOC was waiting for hw
-	 * semaphore (in bfa_iocpf_sm_semwait()).
-	 */
-	tmp_ackd = sync_ackd;
-	if ((sync_reqd &  bfa_ioc_ct_sync_pos(ioc)) &&
-			!(sync_ackd & bfa_ioc_ct_sync_pos(ioc)))
-		sync_ackd |= bfa_ioc_ct_sync_pos(ioc);
-
-	if (sync_reqd == sync_ackd) {
-		writel(bfa_ioc_ct_clear_sync_ackd(r32),
-				ioc->ioc_regs.ioc_fail_sync);
-		writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
-		writel(BFI_IOC_FAIL, ioc->ioc_regs.alt_ioc_fwstate);
-		return true;
-	}
-
-	/**
-	 * If another PCI fn reinitialized and failed again while
-	 * this IOC was waiting for hw sem, the sync_ackd bit for
-	 * this IOC need to be set again to allow reinitialization.
-	 */
-	if (tmp_ackd != sync_ackd)
-		writel((r32 | sync_ackd), ioc->ioc_regs.ioc_fail_sync);
-
-	return false;
-}
-
-static enum bfa_status
-bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode)
-{
-	u32	pll_sclk, pll_fclk, r32;
-
-	pll_sclk = __APP_PLL_312_LRESETN | __APP_PLL_312_ENARST |
-		__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(3U) |
-		__APP_PLL_312_JITLMT0_1(3U) |
-		__APP_PLL_312_CNTLMT0_1(1U);
-	pll_fclk = __APP_PLL_425_LRESETN | __APP_PLL_425_ENARST |
-		__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
-		__APP_PLL_425_JITLMT0_1(3U) |
-		__APP_PLL_425_CNTLMT0_1(1U);
-	if (fcmode) {
-		writel(0, (rb + OP_MODE));
-		writel(__APP_EMS_CMLCKSEL |
-				__APP_EMS_REFCKBUFEN2 |
-				__APP_EMS_CHANNEL_SEL,
-				(rb + ETH_MAC_SER_REG));
-	} else {
-		writel(__GLOBAL_FCOE_MODE, (rb + OP_MODE));
-		writel(__APP_EMS_REFCKBUFEN1,
-				(rb + ETH_MAC_SER_REG));
-	}
-	writel(BFI_IOC_UNINIT, (rb + BFA_IOC0_STATE_REG));
-	writel(BFI_IOC_UNINIT, (rb + BFA_IOC1_STATE_REG));
-	writel(0xffffffffU, (rb + HOSTFN0_INT_MSK));
-	writel(0xffffffffU, (rb + HOSTFN1_INT_MSK));
-	writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS));
-	writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS));
-	writel(0xffffffffU, (rb + HOSTFN0_INT_MSK));
-	writel(0xffffffffU, (rb + HOSTFN1_INT_MSK));
-	writel(pll_sclk |
-		__APP_PLL_312_LOGIC_SOFT_RESET,
-		rb + APP_PLL_312_CTL_REG);
-	writel(pll_fclk |
-		__APP_PLL_425_LOGIC_SOFT_RESET,
-		rb + APP_PLL_425_CTL_REG);
-	writel(pll_sclk |
-		__APP_PLL_312_LOGIC_SOFT_RESET | __APP_PLL_312_ENABLE,
-		rb + APP_PLL_312_CTL_REG);
-	writel(pll_fclk |
-		__APP_PLL_425_LOGIC_SOFT_RESET | __APP_PLL_425_ENABLE,
-		rb + APP_PLL_425_CTL_REG);
-	readl(rb + HOSTFN0_INT_MSK);
-	udelay(2000);
-	writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS));
-	writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS));
-	writel(pll_sclk |
-		__APP_PLL_312_ENABLE,
-		rb + APP_PLL_312_CTL_REG);
-	writel(pll_fclk |
-		__APP_PLL_425_ENABLE,
-		rb + APP_PLL_425_CTL_REG);
-	if (!fcmode) {
-		writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P0));
-		writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P1));
-	}
-	r32 = readl((rb + PSS_CTL_REG));
-	r32 &= ~__PSS_LMEM_RESET;
-	writel(r32, (rb + PSS_CTL_REG));
-	udelay(1000);
-	if (!fcmode) {
-		writel(0, (rb + PMM_1T_RESET_REG_P0));
-		writel(0, (rb + PMM_1T_RESET_REG_P1));
-	}
-
-	writel(__EDRAM_BISTR_START, (rb + MBIST_CTL_REG));
-	udelay(1000);
-	r32 = readl((rb + MBIST_STAT_REG));
-	writel(0, (rb + MBIST_CTL_REG));
-	return BFA_STATUS_OK;
-}

drivers/net/bna/bfi_ctreg.h

@@ -1,646 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-
-/*
- * bfi_ctreg.h catapult host block register definitions
- *
- * !!! Do not edit. Auto generated. !!!
- */
-
-#ifndef __BFI_CTREG_H__
-#define __BFI_CTREG_H__
-
-#define HOSTFN0_LPU_MBOX0_0		0x00019200
-#define HOSTFN1_LPU_MBOX0_8		0x00019260
-#define LPU_HOSTFN0_MBOX0_0		0x00019280
-#define LPU_HOSTFN1_MBOX0_8		0x000192e0
-#define HOSTFN2_LPU_MBOX0_0		0x00019400
-#define HOSTFN3_LPU_MBOX0_8		0x00019460
-#define LPU_HOSTFN2_MBOX0_0		0x00019480
-#define LPU_HOSTFN3_MBOX0_8		0x000194e0
-#define HOSTFN0_INT_STATUS		0x00014000
-#define __HOSTFN0_HALT_OCCURRED		0x01000000
-#define __HOSTFN0_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN0_INT_STATUS_LVL_SH	20
-#define __HOSTFN0_INT_STATUS_LVL(_v)	((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
-#define __HOSTFN0_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN0_INT_STATUS_P_SH	16
-#define __HOSTFN0_INT_STATUS_P(_v)	((_v) << __HOSTFN0_INT_STATUS_P_SH)
-#define __HOSTFN0_INT_STATUS_F		0x0000ffff
-#define HOSTFN0_INT_MSK			0x00014004
-#define HOST_PAGE_NUM_FN0		0x00014008
-#define __HOST_PAGE_NUM_FN		0x000001ff
-#define HOST_MSIX_ERR_INDEX_FN0		0x0001400c
-#define __MSIX_ERR_INDEX_FN		0x000001ff
-#define HOSTFN1_INT_STATUS		0x00014100
-#define __HOSTFN1_HALT_OCCURRED		0x01000000
-#define __HOSTFN1_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN1_INT_STATUS_LVL_SH	20
-#define __HOSTFN1_INT_STATUS_LVL(_v)	((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
-#define __HOSTFN1_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN1_INT_STATUS_P_SH	16
-#define __HOSTFN1_INT_STATUS_P(_v)	((_v) << __HOSTFN1_INT_STATUS_P_SH)
-#define __HOSTFN1_INT_STATUS_F		0x0000ffff
-#define HOSTFN1_INT_MSK			0x00014104
-#define HOST_PAGE_NUM_FN1		0x00014108
-#define HOST_MSIX_ERR_INDEX_FN1		0x0001410c
-#define APP_PLL_425_CTL_REG		0x00014204
-#define __P_425_PLL_LOCK		0x80000000
-#define __APP_PLL_425_SRAM_USE_100MHZ	0x00100000
-#define __APP_PLL_425_RESET_TIMER_MK	0x000e0000
-#define __APP_PLL_425_RESET_TIMER_SH	17
-#define __APP_PLL_425_RESET_TIMER(_v)	((_v) << __APP_PLL_425_RESET_TIMER_SH)
-#define __APP_PLL_425_LOGIC_SOFT_RESET	0x00010000
-#define __APP_PLL_425_CNTLMT0_1_MK	0x0000c000
-#define __APP_PLL_425_CNTLMT0_1_SH	14
-#define __APP_PLL_425_CNTLMT0_1(_v)	((_v) << __APP_PLL_425_CNTLMT0_1_SH)
-#define __APP_PLL_425_JITLMT0_1_MK	0x00003000
-#define __APP_PLL_425_JITLMT0_1_SH	12
-#define __APP_PLL_425_JITLMT0_1(_v)	((_v) << __APP_PLL_425_JITLMT0_1_SH)
-#define __APP_PLL_425_HREF		0x00000800
-#define __APP_PLL_425_HDIV		0x00000400
-#define __APP_PLL_425_P0_1_MK		0x00000300
-#define __APP_PLL_425_P0_1_SH		8
-#define __APP_PLL_425_P0_1(_v)		((_v) << __APP_PLL_425_P0_1_SH)
-#define __APP_PLL_425_Z0_2_MK		0x000000e0
-#define __APP_PLL_425_Z0_2_SH		5
-#define __APP_PLL_425_Z0_2(_v)		((_v) << __APP_PLL_425_Z0_2_SH)
-#define __APP_PLL_425_RSEL200500	0x00000010
-#define __APP_PLL_425_ENARST		0x00000008
-#define __APP_PLL_425_BYPASS		0x00000004
-#define __APP_PLL_425_LRESETN		0x00000002
-#define __APP_PLL_425_ENABLE		0x00000001
-#define APP_PLL_312_CTL_REG		0x00014208
-#define __P_312_PLL_LOCK		0x80000000
-#define __ENABLE_MAC_AHB_1		0x00800000
-#define __ENABLE_MAC_AHB_0		0x00400000
-#define __ENABLE_MAC_1			0x00200000
-#define __ENABLE_MAC_0			0x00100000
-#define __APP_PLL_312_RESET_TIMER_MK	0x000e0000
-#define __APP_PLL_312_RESET_TIMER_SH	17
-#define __APP_PLL_312_RESET_TIMER(_v)	((_v) << __APP_PLL_312_RESET_TIMER_SH)
-#define __APP_PLL_312_LOGIC_SOFT_RESET	0x00010000
-#define __APP_PLL_312_CNTLMT0_1_MK	0x0000c000
-#define __APP_PLL_312_CNTLMT0_1_SH	14
-#define __APP_PLL_312_CNTLMT0_1(_v)	((_v) << __APP_PLL_312_CNTLMT0_1_SH)
-#define __APP_PLL_312_JITLMT0_1_MK	0x00003000
-#define __APP_PLL_312_JITLMT0_1_SH	12
-#define __APP_PLL_312_JITLMT0_1(_v)	((_v) << __APP_PLL_312_JITLMT0_1_SH)
-#define __APP_PLL_312_HREF		0x00000800
-#define __APP_PLL_312_HDIV		0x00000400
-#define __APP_PLL_312_P0_1_MK		0x00000300
-#define __APP_PLL_312_P0_1_SH		8
-#define __APP_PLL_312_P0_1(_v)		((_v) << __APP_PLL_312_P0_1_SH)
-#define __APP_PLL_312_Z0_2_MK		0x000000e0
-#define __APP_PLL_312_Z0_2_SH		5
-#define __APP_PLL_312_Z0_2(_v)		((_v) << __APP_PLL_312_Z0_2_SH)
-#define __APP_PLL_312_RSEL200500	0x00000010
-#define __APP_PLL_312_ENARST		0x00000008
-#define __APP_PLL_312_BYPASS		0x00000004
-#define __APP_PLL_312_LRESETN		0x00000002
-#define __APP_PLL_312_ENABLE		0x00000001
-#define MBIST_CTL_REG			0x00014220
-#define __EDRAM_BISTR_START		0x00000004
-#define __MBIST_RESET			0x00000002
-#define __MBIST_START			0x00000001
-#define MBIST_STAT_REG			0x00014224
-#define __EDRAM_BISTR_STATUS		0x00000008
-#define __EDRAM_BISTR_DONE		0x00000004
-#define __MEM_BIT_STATUS		0x00000002
-#define __MBIST_DONE			0x00000001
-#define HOST_SEM0_REG			0x00014230
-#define __HOST_SEMAPHORE		0x00000001
-#define HOST_SEM1_REG			0x00014234
-#define HOST_SEM2_REG			0x00014238
-#define HOST_SEM3_REG			0x0001423c
-#define HOST_SEM0_INFO_REG		0x00014240
-#define HOST_SEM1_INFO_REG		0x00014244
-#define HOST_SEM2_INFO_REG		0x00014248
-#define HOST_SEM3_INFO_REG		0x0001424c
-#define ETH_MAC_SER_REG			0x00014288
-#define __APP_EMS_CKBUFAMPIN		0x00000020
-#define __APP_EMS_REFCLKSEL		0x00000010
-#define __APP_EMS_CMLCKSEL		0x00000008
-#define __APP_EMS_REFCKBUFEN2		0x00000004
-#define __APP_EMS_REFCKBUFEN1		0x00000002
-#define __APP_EMS_CHANNEL_SEL		0x00000001
-#define HOSTFN2_INT_STATUS		0x00014300
-#define __HOSTFN2_HALT_OCCURRED		0x01000000
-#define __HOSTFN2_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN2_INT_STATUS_LVL_SH	20
-#define __HOSTFN2_INT_STATUS_LVL(_v)	((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
-#define __HOSTFN2_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN2_INT_STATUS_P_SH	16
-#define __HOSTFN2_INT_STATUS_P(_v)	((_v) << __HOSTFN2_INT_STATUS_P_SH)
-#define __HOSTFN2_INT_STATUS_F		0x0000ffff
-#define HOSTFN2_INT_MSK			0x00014304
-#define HOST_PAGE_NUM_FN2		0x00014308
-#define HOST_MSIX_ERR_INDEX_FN2		0x0001430c
-#define HOSTFN3_INT_STATUS		0x00014400
-#define __HALT_OCCURRED			0x01000000
-#define __HOSTFN3_INT_STATUS_LVL_MK	0x00f00000
-#define __HOSTFN3_INT_STATUS_LVL_SH	20
-#define __HOSTFN3_INT_STATUS_LVL(_v)	((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
-#define __HOSTFN3_INT_STATUS_P_MK	0x000f0000
-#define __HOSTFN3_INT_STATUS_P_SH	16
-#define __HOSTFN3_INT_STATUS_P(_v)	((_v) << __HOSTFN3_INT_STATUS_P_SH)
-#define __HOSTFN3_INT_STATUS_F		0x0000ffff
-#define HOSTFN3_INT_MSK			0x00014404
-#define HOST_PAGE_NUM_FN3		0x00014408
-#define HOST_MSIX_ERR_INDEX_FN3		0x0001440c
-#define FNC_ID_REG			0x00014600
-#define __FUNCTION_NUMBER		0x00000007
-#define FNC_PERS_REG			0x00014604
-#define __F3_FUNCTION_ACTIVE		0x80000000
-#define __F3_FUNCTION_MODE		0x40000000
-#define __F3_PORT_MAP_MK		0x30000000
-#define __F3_PORT_MAP_SH		28
-#define __F3_PORT_MAP(_v)		((_v) << __F3_PORT_MAP_SH)
-#define __F3_VM_MODE			0x08000000
-#define __F3_INTX_STATUS_MK		0x07000000
-#define __F3_INTX_STATUS_SH		24
-#define __F3_INTX_STATUS(_v)		((_v) << __F3_INTX_STATUS_SH)
-#define __F2_FUNCTION_ACTIVE		0x00800000
-#define __F2_FUNCTION_MODE		0x00400000
-#define __F2_PORT_MAP_MK		0x00300000
-#define __F2_PORT_MAP_SH		20
-#define __F2_PORT_MAP(_v)		((_v) << __F2_PORT_MAP_SH)
-#define __F2_VM_MODE			0x00080000
-#define __F2_INTX_STATUS_MK		0x00070000
-#define __F2_INTX_STATUS_SH		16
-#define __F2_INTX_STATUS(_v)		((_v) << __F2_INTX_STATUS_SH)
-#define __F1_FUNCTION_ACTIVE		0x00008000
-#define __F1_FUNCTION_MODE		0x00004000
-#define __F1_PORT_MAP_MK		0x00003000
-#define __F1_PORT_MAP_SH		12
-#define __F1_PORT_MAP(_v)		((_v) << __F1_PORT_MAP_SH)
-#define __F1_VM_MODE			0x00000800
-#define __F1_INTX_STATUS_MK		0x00000700
-#define __F1_INTX_STATUS_SH		8
-#define __F1_INTX_STATUS(_v)		((_v) << __F1_INTX_STATUS_SH)
-#define __F0_FUNCTION_ACTIVE		0x00000080
-#define __F0_FUNCTION_MODE		0x00000040
-#define __F0_PORT_MAP_MK		0x00000030
-#define __F0_PORT_MAP_SH		4
-#define __F0_PORT_MAP(_v)		((_v) << __F0_PORT_MAP_SH)
-#define __F0_VM_MODE		0x00000008
-#define __F0_INTX_STATUS		0x00000007
-enum {
-	__F0_INTX_STATUS_MSIX		= 0x0,
-	__F0_INTX_STATUS_INTA		= 0x1,
-	__F0_INTX_STATUS_INTB		= 0x2,
-	__F0_INTX_STATUS_INTC		= 0x3,
-	__F0_INTX_STATUS_INTD		= 0x4,
-};
-#define OP_MODE				0x0001460c
-#define __APP_ETH_CLK_LOWSPEED		0x00000004
-#define __GLOBAL_CORECLK_HALFSPEED	0x00000002
-#define __GLOBAL_FCOE_MODE		0x00000001
-#define HOST_SEM4_REG			0x00014610
-#define HOST_SEM5_REG			0x00014614
-#define HOST_SEM6_REG			0x00014618
-#define HOST_SEM7_REG			0x0001461c
-#define HOST_SEM4_INFO_REG		0x00014620
-#define HOST_SEM5_INFO_REG		0x00014624
-#define HOST_SEM6_INFO_REG		0x00014628
-#define HOST_SEM7_INFO_REG		0x0001462c
-#define HOSTFN0_LPU0_MBOX0_CMD_STAT	0x00019000
-#define __HOSTFN0_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN0_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN0_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN0_LPU1_MBOX0_CMD_STAT	0x00019004
-#define __HOSTFN0_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN0_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN0_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN0_MBOX0_CMD_STAT	0x00019008
-#define __LPU0_HOSTFN0_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN0_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN0_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN0_MBOX0_CMD_STAT	0x0001900c
-#define __LPU1_HOSTFN0_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN0_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN0_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU0_MBOX0_CMD_STAT	0x00019010
-#define __HOSTFN1_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN1_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN1_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN1_LPU1_MBOX0_CMD_STAT	0x00019014
-#define __HOSTFN1_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN1_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN1_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN1_MBOX0_CMD_STAT	0x00019018
-#define __LPU0_HOSTFN1_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN1_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN1_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN1_MBOX0_CMD_STAT	0x0001901c
-#define __LPU1_HOSTFN1_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN1_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN1_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU0_MBOX0_CMD_STAT	0x00019150
-#define __HOSTFN2_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN2_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN2_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN2_LPU1_MBOX0_CMD_STAT	0x00019154
-#define __HOSTFN2_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN2_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN2_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN2_MBOX0_CMD_STAT	0x00019158
-#define __LPU0_HOSTFN2_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN2_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN2_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN2_MBOX0_CMD_STAT	0x0001915c
-#define __LPU1_HOSTFN2_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN2_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN2_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU0_MBOX0_CMD_STAT	0x00019160
-#define __HOSTFN3_LPU0_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN3_LPU0_MBOX0_INFO_SH	1
-#define __HOSTFN3_LPU0_MBOX0_INFO(_v)	((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS 0x00000001
-#define HOSTFN3_LPU1_MBOX0_CMD_STAT	0x00019164
-#define __HOSTFN3_LPU1_MBOX0_INFO_MK	0xfffffffe
-#define __HOSTFN3_LPU1_MBOX0_INFO_SH	1
-#define __HOSTFN3_LPU1_MBOX0_INFO(_v)	((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
-#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS 0x00000001
-#define LPU0_HOSTFN3_MBOX0_CMD_STAT	0x00019168
-#define __LPU0_HOSTFN3_MBOX0_INFO_MK	0xfffffffe
-#define __LPU0_HOSTFN3_MBOX0_INFO_SH	1
-#define __LPU0_HOSTFN3_MBOX0_INFO(_v)	((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
-#define LPU1_HOSTFN3_MBOX0_CMD_STAT	0x0001916c
-#define __LPU1_HOSTFN3_MBOX0_INFO_MK	0xfffffffe
-#define __LPU1_HOSTFN3_MBOX0_INFO_SH	1
-#define __LPU1_HOSTFN3_MBOX0_INFO(_v)	((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
-#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS	0x00000001
-#define FW_INIT_HALT_P0			0x000191ac
-#define __FW_INIT_HALT_P		0x00000001
-#define FW_INIT_HALT_P1			0x000191bc
-#define CPE_PI_PTR_Q0			0x00038000
-#define __CPE_PI_UNUSED_MK		0xffff0000
-#define __CPE_PI_UNUSED_SH		16
-#define __CPE_PI_UNUSED(_v)		((_v) << __CPE_PI_UNUSED_SH)
-#define __CPE_PI_PTR			0x0000ffff
-#define CPE_PI_PTR_Q1			0x00038040
-#define CPE_CI_PTR_Q0			0x00038004
-#define __CPE_CI_UNUSED_MK		0xffff0000
-#define __CPE_CI_UNUSED_SH		16
-#define __CPE_CI_UNUSED(_v)		((_v) << __CPE_CI_UNUSED_SH)
-#define __CPE_CI_PTR			0x0000ffff
-#define CPE_CI_PTR_Q1			0x00038044
-#define CPE_DEPTH_Q0			0x00038008
-#define __CPE_DEPTH_UNUSED_MK		0xf8000000
-#define __CPE_DEPTH_UNUSED_SH		27
-#define __CPE_DEPTH_UNUSED(_v)		((_v) << __CPE_DEPTH_UNUSED_SH)
-#define __CPE_MSIX_VEC_INDEX_MK		0x07ff0000
-#define __CPE_MSIX_VEC_INDEX_SH		16
-#define __CPE_MSIX_VEC_INDEX(_v)	((_v) << __CPE_MSIX_VEC_INDEX_SH)
-#define __CPE_DEPTH			0x0000ffff
-#define CPE_DEPTH_Q1			0x00038048
-#define CPE_QCTRL_Q0			0x0003800c
-#define __CPE_CTRL_UNUSED30_MK		0xfc000000
-#define __CPE_CTRL_UNUSED30_SH		26
-#define __CPE_CTRL_UNUSED30(_v)		((_v) << __CPE_CTRL_UNUSED30_SH)
-#define __CPE_FUNC_INT_CTRL_MK		0x03000000
-#define __CPE_FUNC_INT_CTRL_SH		24
-#define __CPE_FUNC_INT_CTRL(_v)		((_v) << __CPE_FUNC_INT_CTRL_SH)
-enum {
-	__CPE_FUNC_INT_CTRL_DISABLE		= 0x0,
-	__CPE_FUNC_INT_CTRL_F2NF		= 0x1,
-	__CPE_FUNC_INT_CTRL_3QUART		= 0x2,
-	__CPE_FUNC_INT_CTRL_HALF		= 0x3,
-};
-#define __CPE_CTRL_UNUSED20_MK		0x00f00000
-#define __CPE_CTRL_UNUSED20_SH		20
-#define __CPE_CTRL_UNUSED20(_v)		((_v) << __CPE_CTRL_UNUSED20_SH)
-#define __CPE_SCI_TH_MK			0x000f0000
-#define __CPE_SCI_TH_SH			16
-#define __CPE_SCI_TH(_v)		((_v) << __CPE_SCI_TH_SH)
-#define __CPE_CTRL_UNUSED10_MK		0x0000c000
-#define __CPE_CTRL_UNUSED10_SH		14
-#define __CPE_CTRL_UNUSED10(_v)		((_v) << __CPE_CTRL_UNUSED10_SH)
-#define __CPE_ACK_PENDING		0x00002000
-#define __CPE_CTRL_UNUSED40_MK		0x00001c00
-#define __CPE_CTRL_UNUSED40_SH		10
-#define __CPE_CTRL_UNUSED40(_v)		((_v) << __CPE_CTRL_UNUSED40_SH)
-#define __CPE_PCIEID_MK			0x00000300
-#define __CPE_PCIEID_SH			8
-#define __CPE_PCIEID(_v)		((_v) << __CPE_PCIEID_SH)
-#define __CPE_CTRL_UNUSED00_MK		0x000000fe
-#define __CPE_CTRL_UNUSED00_SH		1
-#define __CPE_CTRL_UNUSED00(_v)		((_v) << __CPE_CTRL_UNUSED00_SH)
-#define __CPE_ESIZE			0x00000001
-#define CPE_QCTRL_Q1			0x0003804c
-#define __CPE_CTRL_UNUSED31_MK		0xfc000000
-#define __CPE_CTRL_UNUSED31_SH		26
-#define __CPE_CTRL_UNUSED31(_v)		((_v) << __CPE_CTRL_UNUSED31_SH)
-#define __CPE_CTRL_UNUSED21_MK		0x00f00000
-#define __CPE_CTRL_UNUSED21_SH		20
-#define __CPE_CTRL_UNUSED21(_v)		((_v) << __CPE_CTRL_UNUSED21_SH)
-#define __CPE_CTRL_UNUSED11_MK		0x0000c000
-#define __CPE_CTRL_UNUSED11_SH		14
-#define __CPE_CTRL_UNUSED11(_v)		((_v) << __CPE_CTRL_UNUSED11_SH)
-#define __CPE_CTRL_UNUSED41_MK		0x00001c00
-#define __CPE_CTRL_UNUSED41_SH		10
-#define __CPE_CTRL_UNUSED41(_v)		((_v) << __CPE_CTRL_UNUSED41_SH)
-#define __CPE_CTRL_UNUSED01_MK		0x000000fe
-#define __CPE_CTRL_UNUSED01_SH		1
-#define __CPE_CTRL_UNUSED01(_v)		((_v) << __CPE_CTRL_UNUSED01_SH)
-#define RME_PI_PTR_Q0			0x00038020
-#define __LATENCY_TIME_STAMP_MK		0xffff0000
-#define __LATENCY_TIME_STAMP_SH		16
-#define __LATENCY_TIME_STAMP(_v)	((_v) << __LATENCY_TIME_STAMP_SH)
-#define __RME_PI_PTR			0x0000ffff
-#define RME_PI_PTR_Q1			0x00038060
-#define RME_CI_PTR_Q0			0x00038024
-#define __DELAY_TIME_STAMP_MK		0xffff0000
-#define __DELAY_TIME_STAMP_SH		16
-#define __DELAY_TIME_STAMP(_v)		((_v) << __DELAY_TIME_STAMP_SH)
-#define __RME_CI_PTR			0x0000ffff
-#define RME_CI_PTR_Q1			0x00038064
-#define RME_DEPTH_Q0			0x00038028
-#define __RME_DEPTH_UNUSED_MK		0xf8000000
-#define __RME_DEPTH_UNUSED_SH		27
-#define __RME_DEPTH_UNUSED(_v)		((_v) << __RME_DEPTH_UNUSED_SH)
-#define __RME_MSIX_VEC_INDEX_MK		0x07ff0000
-#define __RME_MSIX_VEC_INDEX_SH		16
-#define __RME_MSIX_VEC_INDEX(_v)	((_v) << __RME_MSIX_VEC_INDEX_SH)
-#define __RME_DEPTH			0x0000ffff
-#define RME_DEPTH_Q1			0x00038068
-#define RME_QCTRL_Q0			0x0003802c
-#define __RME_INT_LATENCY_TIMER_MK	0xff000000
-#define __RME_INT_LATENCY_TIMER_SH	24
-#define __RME_INT_LATENCY_TIMER(_v)	((_v) << __RME_INT_LATENCY_TIMER_SH)
-#define __RME_INT_DELAY_TIMER_MK	0x00ff0000
-#define __RME_INT_DELAY_TIMER_SH	16
-#define __RME_INT_DELAY_TIMER(_v)	((_v) << __RME_INT_DELAY_TIMER_SH)
-#define __RME_INT_DELAY_DISABLE		0x00008000
-#define __RME_DLY_DELAY_DISABLE		0x00004000
-#define __RME_ACK_PENDING		0x00002000
-#define __RME_FULL_INTERRUPT_DISABLE	0x00001000
-#define __RME_CTRL_UNUSED10_MK		0x00000c00
-#define __RME_CTRL_UNUSED10_SH		10
-#define __RME_CTRL_UNUSED10(_v)		((_v) << __RME_CTRL_UNUSED10_SH)
-#define __RME_PCIEID_MK			0x00000300
-#define __RME_PCIEID_SH			8
-#define __RME_PCIEID(_v)		((_v) << __RME_PCIEID_SH)
-#define __RME_CTRL_UNUSED00_MK		0x000000fe
-#define __RME_CTRL_UNUSED00_SH		1
-#define __RME_CTRL_UNUSED00(_v)		((_v) << __RME_CTRL_UNUSED00_SH)
-#define __RME_ESIZE			0x00000001
-#define RME_QCTRL_Q1			0x0003806c
-#define __RME_CTRL_UNUSED11_MK		0x00000c00
-#define __RME_CTRL_UNUSED11_SH		10
-#define __RME_CTRL_UNUSED11(_v)		((_v) << __RME_CTRL_UNUSED11_SH)
-#define __RME_CTRL_UNUSED01_MK		0x000000fe
-#define __RME_CTRL_UNUSED01_SH		1
-#define __RME_CTRL_UNUSED01(_v)		((_v) << __RME_CTRL_UNUSED01_SH)
-#define PSS_CTL_REG			0x00018800
-#define __PSS_I2C_CLK_DIV_MK		0x007f0000
-#define __PSS_I2C_CLK_DIV_SH		16
-#define __PSS_I2C_CLK_DIV(_v)		((_v) << __PSS_I2C_CLK_DIV_SH)
-#define __PSS_LMEM_INIT_DONE		0x00001000
-#define __PSS_LMEM_RESET		0x00000200
-#define __PSS_LMEM_INIT_EN		0x00000100
-#define __PSS_LPU1_RESET		0x00000002
-#define __PSS_LPU0_RESET		0x00000001
-#define PSS_ERR_STATUS_REG		0x00018810
-#define __PSS_LPU1_TCM_READ_ERR		0x00200000
-#define __PSS_LPU0_TCM_READ_ERR		0x00100000
-#define __PSS_LMEM5_CORR_ERR		0x00080000
-#define __PSS_LMEM4_CORR_ERR		0x00040000
-#define __PSS_LMEM3_CORR_ERR		0x00020000
-#define __PSS_LMEM2_CORR_ERR		0x00010000
-#define __PSS_LMEM1_CORR_ERR		0x00008000
-#define __PSS_LMEM0_CORR_ERR		0x00004000
-#define __PSS_LMEM5_UNCORR_ERR		0x00002000
-#define __PSS_LMEM4_UNCORR_ERR		0x00001000
-#define __PSS_LMEM3_UNCORR_ERR		0x00000800
-#define __PSS_LMEM2_UNCORR_ERR		0x00000400
-#define __PSS_LMEM1_UNCORR_ERR		0x00000200
-#define __PSS_LMEM0_UNCORR_ERR		0x00000100
-#define __PSS_BAL_PERR			0x00000080
-#define __PSS_DIP_IF_ERR		0x00000040
-#define __PSS_IOH_IF_ERR		0x00000020
-#define __PSS_TDS_IF_ERR		0x00000010
-#define __PSS_RDS_IF_ERR		0x00000008
-#define __PSS_SGM_IF_ERR		0x00000004
-#define __PSS_LPU1_RAM_ERR		0x00000002
-#define __PSS_LPU0_RAM_ERR		0x00000001
-#define ERR_SET_REG			0x00018818
-#define __PSS_ERR_STATUS_SET		0x003fffff
-#define PMM_1T_RESET_REG_P0		0x0002381c
-#define __PMM_1T_RESET_P		0x00000001
-#define PMM_1T_RESET_REG_P1		0x00023c1c
-#define HQM_QSET0_RXQ_DRBL_P0		0x00038000
-#define __RXQ0_ADD_VECTORS_P		0x80000000
-#define __RXQ0_STOP_P			0x40000000
-#define __RXQ0_PRD_PTR_P		0x0000ffff
-#define HQM_QSET1_RXQ_DRBL_P0		0x00038080
-#define __RXQ1_ADD_VECTORS_P		0x80000000
-#define __RXQ1_STOP_P			0x40000000
-#define __RXQ1_PRD_PTR_P		0x0000ffff
-#define HQM_QSET0_RXQ_DRBL_P1		0x0003c000
-#define HQM_QSET1_RXQ_DRBL_P1		0x0003c080
-#define HQM_QSET0_TXQ_DRBL_P0		0x00038020
-#define __TXQ0_ADD_VECTORS_P		0x80000000
-#define __TXQ0_STOP_P			0x40000000
-#define __TXQ0_PRD_PTR_P		0x0000ffff
-#define HQM_QSET1_TXQ_DRBL_P0		0x000380a0
-#define __TXQ1_ADD_VECTORS_P		0x80000000
-#define __TXQ1_STOP_P			0x40000000
-#define __TXQ1_PRD_PTR_P		0x0000ffff
-#define HQM_QSET0_TXQ_DRBL_P1		0x0003c020
-#define HQM_QSET1_TXQ_DRBL_P1		0x0003c0a0
-#define HQM_QSET0_IB_DRBL_1_P0		0x00038040
-#define __IB1_0_ACK_P			0x80000000
-#define __IB1_0_DISABLE_P		0x40000000
-#define __IB1_0_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB1_0_COALESCING_CFG_P_SH	16
-#define __IB1_0_COALESCING_CFG_P(_v)	((_v) << __IB1_0_COALESCING_CFG_P_SH)
-#define __IB1_0_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET1_IB_DRBL_1_P0		0x000380c0
-#define __IB1_1_ACK_P			0x80000000
-#define __IB1_1_DISABLE_P		0x40000000
-#define __IB1_1_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB1_1_COALESCING_CFG_P_SH	16
-#define __IB1_1_COALESCING_CFG_P(_v)	((_v) << __IB1_1_COALESCING_CFG_P_SH)
-#define __IB1_1_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET0_IB_DRBL_1_P1		0x0003c040
-#define HQM_QSET1_IB_DRBL_1_P1		0x0003c0c0
-#define HQM_QSET0_IB_DRBL_2_P0		0x00038060
-#define __IB2_0_ACK_P			0x80000000
-#define __IB2_0_DISABLE_P		0x40000000
-#define __IB2_0_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB2_0_COALESCING_CFG_P_SH	16
-#define __IB2_0_COALESCING_CFG_P(_v)	((_v) << __IB2_0_COALESCING_CFG_P_SH)
-#define __IB2_0_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET1_IB_DRBL_2_P0		0x000380e0
-#define __IB2_1_ACK_P			0x80000000
-#define __IB2_1_DISABLE_P		0x40000000
-#define __IB2_1_COALESCING_CFG_P_MK	0x00ff0000
-#define __IB2_1_COALESCING_CFG_P_SH	16
-#define __IB2_1_COALESCING_CFG_P(_v)	((_v) << __IB2_1_COALESCING_CFG_P_SH)
-#define __IB2_1_NUM_OF_ACKED_EVENTS_P	0x0000ffff
-#define HQM_QSET0_IB_DRBL_2_P1		0x0003c060
-#define HQM_QSET1_IB_DRBL_2_P1		0x0003c0e0
-
-/*
- * These definitions are either in error/missing in spec. Its auto-generated
- * from hard coded values in regparse.pl.
- */
-#define __EMPHPOST_AT_4G_MK_FIX		0x0000001c
-#define __EMPHPOST_AT_4G_SH_FIX		0x00000002
-#define __EMPHPRE_AT_4G_FIX		0x00000003
-#define __SFP_TXRATE_EN_FIX		0x00000100
-#define __SFP_RXRATE_EN_FIX		0x00000080
-
-/*
- * These register definitions are auto-generated from hard coded values
- * in regparse.pl.
- */
-
-/*
- * These register mapping definitions are auto-generated from mapping tables
- * in regparse.pl.
- */
-#define BFA_IOC0_HBEAT_REG		HOST_SEM0_INFO_REG
-#define BFA_IOC0_STATE_REG		HOST_SEM1_INFO_REG
-#define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG
-#define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG
-#define BFA_FW_USE_COUNT		 HOST_SEM4_INFO_REG
-#define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG
-
-#define CPE_DEPTH_Q(__n) \
-	(CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
-#define CPE_QCTRL_Q(__n) \
-	(CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
-#define CPE_PI_PTR_Q(__n) \
-	(CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
-#define CPE_CI_PTR_Q(__n) \
-	(CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
-#define RME_DEPTH_Q(__n) \
-	(RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
-#define RME_QCTRL_Q(__n) \
-	(RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
-#define RME_PI_PTR_Q(__n) \
-	(RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
-#define RME_CI_PTR_Q(__n) \
-	(RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
-#define HQM_QSET_RXQ_DRBL_P0(__n) \
-	(HQM_QSET0_RXQ_DRBL_P0 + (__n) * \
-		(HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
-#define HQM_QSET_TXQ_DRBL_P0(__n) \
-	(HQM_QSET0_TXQ_DRBL_P0 + (__n) * \
-		(HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
-#define HQM_QSET_IB_DRBL_1_P0(__n) \
-	(HQM_QSET0_IB_DRBL_1_P0 + (__n) * \
-		(HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
-#define HQM_QSET_IB_DRBL_2_P0(__n) \
-	(HQM_QSET0_IB_DRBL_2_P0 + (__n) * \
-		(HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
-#define HQM_QSET_RXQ_DRBL_P1(__n) \
-	(HQM_QSET0_RXQ_DRBL_P1 + (__n) * \
-		(HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
-#define HQM_QSET_TXQ_DRBL_P1(__n) \
-	(HQM_QSET0_TXQ_DRBL_P1 + (__n) * \
-		(HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
-#define HQM_QSET_IB_DRBL_1_P1(__n) \
-	(HQM_QSET0_IB_DRBL_1_P1 + (__n) * \
-		(HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
-#define HQM_QSET_IB_DRBL_2_P1(__n) \
-	(HQM_QSET0_IB_DRBL_2_P1 + (__n) * \
-		(HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
-
-#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
-#define CPE_Q_MASK(__q) ((__q) & 0x3)
-#define RME_Q_MASK(__q) ((__q) & 0x3)
-
-/*
- * PCI MSI-X vector defines
- */
-enum {
-	BFA_MSIX_CPE_Q0 = 0,
-	BFA_MSIX_CPE_Q1 = 1,
-	BFA_MSIX_CPE_Q2 = 2,
-	BFA_MSIX_CPE_Q3 = 3,
-	BFA_MSIX_RME_Q0 = 4,
-	BFA_MSIX_RME_Q1 = 5,
-	BFA_MSIX_RME_Q2 = 6,
-	BFA_MSIX_RME_Q3 = 7,
-	BFA_MSIX_LPU_ERR = 8,
-	BFA_MSIX_CT_MAX = 9,
-};
-
-/*
- * And corresponding host interrupt status bit field defines
- */
-#define __HFN_INT_CPE_Q0		0x00000001U
-#define __HFN_INT_CPE_Q1		0x00000002U
-#define __HFN_INT_CPE_Q2		0x00000004U
-#define __HFN_INT_CPE_Q3		0x00000008U
-#define __HFN_INT_CPE_Q4		0x00000010U
-#define __HFN_INT_CPE_Q5		0x00000020U
-#define __HFN_INT_CPE_Q6		0x00000040U
-#define __HFN_INT_CPE_Q7		0x00000080U
-#define __HFN_INT_RME_Q0		0x00000100U
-#define __HFN_INT_RME_Q1		0x00000200U
-#define __HFN_INT_RME_Q2		0x00000400U
-#define __HFN_INT_RME_Q3		0x00000800U
-#define __HFN_INT_RME_Q4		0x00001000U
-#define __HFN_INT_RME_Q5		0x00002000U
-#define __HFN_INT_RME_Q6		0x00004000U
-#define __HFN_INT_RME_Q7		0x00008000U
-#define __HFN_INT_ERR_EMC		0x00010000U
-#define __HFN_INT_ERR_LPU0		0x00020000U
-#define __HFN_INT_ERR_LPU1		0x00040000U
-#define __HFN_INT_ERR_PSS		0x00080000U
-#define __HFN_INT_MBOX_LPU0		0x00100000U
-#define __HFN_INT_MBOX_LPU1		0x00200000U
-#define __HFN_INT_MBOX1_LPU0		0x00400000U
-#define __HFN_INT_MBOX1_LPU1		0x00800000U
-#define __HFN_INT_LL_HALT		0x01000000U
-#define __HFN_INT_CPE_MASK		0x000000ffU
-#define __HFN_INT_RME_MASK		0x0000ff00U
-
-/*
- * catapult memory map.
- */
-#define LL_PGN_HQM0		0x0096
-#define LL_PGN_HQM1		0x0097
-#define PSS_SMEM_PAGE_START	0x8000
-#define PSS_SMEM_PGNUM(_pg0, _ma)	((_pg0) + ((_ma) >> 15))
-#define PSS_SMEM_PGOFF(_ma)	((_ma) & 0x7fff)
-
-/*
- * End of catapult memory map
- */
-
-#endif /* __BFI_CTREG_H__ */

drivers/net/bna/bfi_ll.h

@@ -1,438 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-#ifndef __BFI_LL_H__
-#define __BFI_LL_H__
-
-#include "bfi.h"
-
-#pragma pack(1)
-
-/**
- * @brief
- *	"enums" for all LL mailbox messages other than IOC
- */
-enum {
-	BFI_LL_H2I_MAC_UCAST_SET_REQ = 1,
-	BFI_LL_H2I_MAC_UCAST_ADD_REQ = 2,
-	BFI_LL_H2I_MAC_UCAST_DEL_REQ = 3,
-
-	BFI_LL_H2I_MAC_MCAST_ADD_REQ = 4,
-	BFI_LL_H2I_MAC_MCAST_DEL_REQ = 5,
-	BFI_LL_H2I_MAC_MCAST_FILTER_REQ = 6,
-	BFI_LL_H2I_MAC_MCAST_DEL_ALL_REQ = 7,
-
-	BFI_LL_H2I_PORT_ADMIN_REQ = 8,
-	BFI_LL_H2I_STATS_GET_REQ = 9,
-	BFI_LL_H2I_STATS_CLEAR_REQ = 10,
-
-	BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ = 11,
-	BFI_LL_H2I_RXF_DEFAULT_SET_REQ = 12,
-
-	BFI_LL_H2I_TXQ_STOP_REQ = 13,
-	BFI_LL_H2I_RXQ_STOP_REQ = 14,
-
-	BFI_LL_H2I_DIAG_LOOPBACK_REQ = 15,
-
-	BFI_LL_H2I_SET_PAUSE_REQ = 16,
-	BFI_LL_H2I_MTU_INFO_REQ = 17,
-
-	BFI_LL_H2I_RX_REQ = 18,
-} ;
-
-enum {
-	BFI_LL_I2H_MAC_UCAST_SET_RSP = BFA_I2HM(1),
-	BFI_LL_I2H_MAC_UCAST_ADD_RSP = BFA_I2HM(2),
-	BFI_LL_I2H_MAC_UCAST_DEL_RSP = BFA_I2HM(3),
-
-	BFI_LL_I2H_MAC_MCAST_ADD_RSP = BFA_I2HM(4),
-	BFI_LL_I2H_MAC_MCAST_DEL_RSP = BFA_I2HM(5),
-	BFI_LL_I2H_MAC_MCAST_FILTER_RSP = BFA_I2HM(6),
-	BFI_LL_I2H_MAC_MCAST_DEL_ALL_RSP = BFA_I2HM(7),
-
-	BFI_LL_I2H_PORT_ADMIN_RSP = BFA_I2HM(8),
-	BFI_LL_I2H_STATS_GET_RSP = BFA_I2HM(9),
-	BFI_LL_I2H_STATS_CLEAR_RSP = BFA_I2HM(10),
-
-	BFI_LL_I2H_RXF_PROMISCUOUS_SET_RSP = BFA_I2HM(11),
-	BFI_LL_I2H_RXF_DEFAULT_SET_RSP = BFA_I2HM(12),
-
-	BFI_LL_I2H_TXQ_STOP_RSP = BFA_I2HM(13),
-	BFI_LL_I2H_RXQ_STOP_RSP = BFA_I2HM(14),
-
-	BFI_LL_I2H_DIAG_LOOPBACK_RSP = BFA_I2HM(15),
-
-	BFI_LL_I2H_SET_PAUSE_RSP = BFA_I2HM(16),
-
-	BFI_LL_I2H_MTU_INFO_RSP = BFA_I2HM(17),
-	BFI_LL_I2H_RX_RSP = BFA_I2HM(18),
-
-	BFI_LL_I2H_LINK_DOWN_AEN = BFA_I2HM(19),
-	BFI_LL_I2H_LINK_UP_AEN = BFA_I2HM(20),
-
-	BFI_LL_I2H_PORT_ENABLE_AEN = BFA_I2HM(21),
-	BFI_LL_I2H_PORT_DISABLE_AEN = BFA_I2HM(22),
-} ;
-
-/**
- * @brief bfi_ll_mac_addr_req is used by:
- *        BFI_LL_H2I_MAC_UCAST_SET_REQ
- *        BFI_LL_H2I_MAC_UCAST_ADD_REQ
- *        BFI_LL_H2I_MAC_UCAST_DEL_REQ
- *        BFI_LL_H2I_MAC_MCAST_ADD_REQ
- *        BFI_LL_H2I_MAC_MCAST_DEL_REQ
- */
-struct bfi_ll_mac_addr_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		rxf_id;
-	u8		rsvd1[3];
-	mac_t		mac_addr;
-	u8		rsvd2[2];
-};
-
-/**
- * @brief bfi_ll_mcast_filter_req is used by:
- *	  BFI_LL_H2I_MAC_MCAST_FILTER_REQ
- */
-struct bfi_ll_mcast_filter_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		rxf_id;
-	u8		enable;
-	u8		rsvd[2];
-};
-
-/**
- * @brief bfi_ll_mcast_del_all is used by:
- *	  BFI_LL_H2I_MAC_MCAST_DEL_ALL_REQ
- */
-struct bfi_ll_mcast_del_all_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		   rxf_id;
-	u8		   rsvd[3];
-};
-
-/**
- * @brief bfi_ll_q_stop_req is used by:
- *	BFI_LL_H2I_TXQ_STOP_REQ
- *	BFI_LL_H2I_RXQ_STOP_REQ
- */
-struct bfi_ll_q_stop_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u32	q_id_mask[2];	/* !< bit-mask for queue ids */
-};
-
-/**
- * @brief bfi_ll_stats_req is used by:
- *    BFI_LL_I2H_STATS_GET_REQ
- *    BFI_LL_I2H_STATS_CLEAR_REQ
- */
-struct bfi_ll_stats_req {
-	struct bfi_mhdr mh;	/*!< common msg header */
-	u16 stats_mask;	/* !< bit-mask for non-function statistics */
-	u8	rsvd[2];
-	u32 rxf_id_mask[2];	/* !< bit-mask for RxF Statistics */
-	u32 txf_id_mask[2];	/* !< bit-mask for TxF Statistics */
-	union bfi_addr_u  host_buffer;	/* !< where statistics are returned */
-};
-
-/**
- * @brief defines for "stats_mask" above.
- */
-#define BFI_LL_STATS_MAC	(1 << 0)	/* !< MAC Statistics */
-#define BFI_LL_STATS_BPC	(1 << 1)	/* !< Pause Stats from BPC */
-#define BFI_LL_STATS_RAD	(1 << 2)	/* !< Rx Admission Statistics */
-#define BFI_LL_STATS_RX_FC	(1 << 3)	/* !< Rx FC Stats from RxA */
-#define BFI_LL_STATS_TX_FC	(1 << 4)	/* !< Tx FC Stats from TxA */
-
-#define BFI_LL_STATS_ALL	0x1f
-
-/**
- * @brief bfi_ll_port_admin_req
- */
-struct bfi_ll_port_admin_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		 up;
-	u8		 rsvd[3];
-};
-
-/**
- * @brief bfi_ll_rxf_req is used by:
- *      BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ
- *      BFI_LL_H2I_RXF_DEFAULT_SET_REQ
- */
-struct bfi_ll_rxf_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		rxf_id;
-	u8		enable;
-	u8		rsvd[2];
-};
-
-/**
- * @brief bfi_ll_rxf_multi_req is used by:
- *	BFI_LL_H2I_RX_REQ
- */
-struct bfi_ll_rxf_multi_req {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u32	rxf_id_mask[2];
-	u8		enable;
-	u8		rsvd[3];
-};
-
-/**
- * @brief enum for Loopback opmodes
- */
-enum {
-	BFI_LL_DIAG_LB_OPMODE_EXT = 0,
-	BFI_LL_DIAG_LB_OPMODE_CBL = 1,
-};
-
-/**
- * @brief bfi_ll_set_pause_req is used by:
- *	BFI_LL_H2I_SET_PAUSE_REQ
- */
-struct bfi_ll_set_pause_req {
-	struct bfi_mhdr mh;
-	u8		tx_pause; /* 1 = enable, 0 =  disable */
-	u8		rx_pause; /* 1 = enable, 0 =  disable */
-	u8		rsvd[2];
-};
-
-/**
- * @brief bfi_ll_mtu_info_req is used by:
- *	BFI_LL_H2I_MTU_INFO_REQ
- */
-struct bfi_ll_mtu_info_req {
-	struct bfi_mhdr mh;
-	u16	mtu;
-	u8		rsvd[2];
-};
-
-/**
- * @brief
- *	  Response header format used by all responses
- *	  For both responses and asynchronous notifications
- */
-struct bfi_ll_rsp {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u8		error;
-	u8		rsvd[3];
-};
-
-/**
- * @brief bfi_ll_cee_aen is used by:
- *	BFI_LL_I2H_LINK_DOWN_AEN
- *	BFI_LL_I2H_LINK_UP_AEN
- */
-struct bfi_ll_aen {
-	struct bfi_mhdr mh;		/*!< common msg header */
-	u32	reason;
-	u8		cee_linkup;
-	u8		prio_map;    /*!< LL priority bit-map */
-	u8		rsvd[2];
-};
-
-/**
- * @brief
- * 	The following error codes can be returned
- *	by the mbox commands
- */
-enum {
-	BFI_LL_CMD_OK 		= 0,
-	BFI_LL_CMD_FAIL 	= 1,
-	BFI_LL_CMD_DUP_ENTRY	= 2,	/* !< Duplicate entry in CAM */
-	BFI_LL_CMD_CAM_FULL	= 3,	/* !< CAM is full */
-	BFI_LL_CMD_NOT_OWNER	= 4,   	/* !< Not permitted, b'cos not owner */
-	BFI_LL_CMD_NOT_EXEC	= 5,   	/* !< Was not sent to f/w at all */
-	BFI_LL_CMD_WAITING	= 6,	/* !< Waiting for completion (VMware) */
-	BFI_LL_CMD_PORT_DISABLED	= 7,	/* !< port in disabled state */
-} ;
-
-/* Statistics */
-#define BFI_LL_TXF_ID_MAX  	64
-#define BFI_LL_RXF_ID_MAX  	64
-
-/* TxF Frame Statistics */
-struct bfi_ll_stats_txf {
-	u64 ucast_octets;
-	u64 ucast;
-	u64 ucast_vlan;
-
-	u64 mcast_octets;
-	u64 mcast;
-	u64 mcast_vlan;
-
-	u64 bcast_octets;
-	u64 bcast;
-	u64 bcast_vlan;
-
-	u64 errors;
-	u64 filter_vlan;      /* frames filtered due to VLAN */
-	u64 filter_mac_sa;    /* frames filtered due to SA check */
-};
-
-/* RxF Frame Statistics */
-struct bfi_ll_stats_rxf {
-	u64 ucast_octets;
-	u64 ucast;
-	u64 ucast_vlan;
-
-	u64 mcast_octets;
-	u64 mcast;
-	u64 mcast_vlan;
-
-	u64 bcast_octets;
-	u64 bcast;
-	u64 bcast_vlan;
-	u64 frame_drops;
-};
-
-/* FC Tx Frame Statistics */
-struct bfi_ll_stats_fc_tx {
-	u64 txf_ucast_octets;
-	u64 txf_ucast;
-	u64 txf_ucast_vlan;
-
-	u64 txf_mcast_octets;
-	u64 txf_mcast;
-	u64 txf_mcast_vlan;
-
-	u64 txf_bcast_octets;
-	u64 txf_bcast;
-	u64 txf_bcast_vlan;
-
-	u64 txf_parity_errors;
-	u64 txf_timeout;
-	u64 txf_fid_parity_errors;
-};
-
-/* FC Rx Frame Statistics */
-struct bfi_ll_stats_fc_rx {
-	u64 rxf_ucast_octets;
-	u64 rxf_ucast;
-	u64 rxf_ucast_vlan;
-
-	u64 rxf_mcast_octets;
-	u64 rxf_mcast;
-	u64 rxf_mcast_vlan;
-
-	u64 rxf_bcast_octets;
-	u64 rxf_bcast;
-	u64 rxf_bcast_vlan;
-};
-
-/* RAD Frame Statistics */
-struct bfi_ll_stats_rad {
-	u64 rx_frames;
-	u64 rx_octets;
-	u64 rx_vlan_frames;
-
-	u64 rx_ucast;
-	u64 rx_ucast_octets;
-	u64 rx_ucast_vlan;
-
-	u64 rx_mcast;
-	u64 rx_mcast_octets;
-	u64 rx_mcast_vlan;
-
-	u64 rx_bcast;
-	u64 rx_bcast_octets;
-	u64 rx_bcast_vlan;
-
-	u64 rx_drops;
-};
-
-/* BPC Tx Registers */
-struct bfi_ll_stats_bpc {
-	/* transmit stats */
-	u64 tx_pause[8];
-	u64 tx_zero_pause[8];	/*!< Pause cancellation */
-	/*!<Pause initiation rather than retention */
-	u64 tx_first_pause[8];
-
-	/* receive stats */
-	u64 rx_pause[8];
-	u64 rx_zero_pause[8];	/*!< Pause cancellation */
-	/*!<Pause initiation rather than retention */
-	u64 rx_first_pause[8];
-};
-
-/* MAC Rx Statistics */
-struct bfi_ll_stats_mac {
-	u64 frame_64;		/* both rx and tx counter */
-	u64 frame_65_127;		/* both rx and tx counter */
-	u64 frame_128_255;		/* both rx and tx counter */
-	u64 frame_256_511;		/* both rx and tx counter */
-	u64 frame_512_1023;	/* both rx and tx counter */
-	u64 frame_1024_1518;	/* both rx and tx counter */
-	u64 frame_1519_1522;	/* both rx and tx counter */
-
-	/* receive stats */
-	u64 rx_bytes;
-	u64 rx_packets;
-	u64 rx_fcs_error;
-	u64 rx_multicast;
-	u64 rx_broadcast;
-	u64 rx_control_frames;
-	u64 rx_pause;
-	u64 rx_unknown_opcode;
-	u64 rx_alignment_error;
-	u64 rx_frame_length_error;
-	u64 rx_code_error;
-	u64 rx_carrier_sense_error;
-	u64 rx_undersize;
-	u64 rx_oversize;
-	u64 rx_fragments;
-	u64 rx_jabber;
-	u64 rx_drop;
-
-	/* transmit stats */
-	u64 tx_bytes;
-	u64 tx_packets;
-	u64 tx_multicast;
-	u64 tx_broadcast;
-	u64 tx_pause;
-	u64 tx_deferral;
-	u64 tx_excessive_deferral;
-	u64 tx_single_collision;
-	u64 tx_muliple_collision;
-	u64 tx_late_collision;
-	u64 tx_excessive_collision;
-	u64 tx_total_collision;
-	u64 tx_pause_honored;
-	u64 tx_drop;
-	u64 tx_jabber;
-	u64 tx_fcs_error;
-	u64 tx_control_frame;
-	u64 tx_oversize;
-	u64 tx_undersize;
-	u64 tx_fragments;
-};
-
-/* Complete statistics */
-struct bfi_ll_stats {
-	struct bfi_ll_stats_mac		mac_stats;
-	struct bfi_ll_stats_bpc		bpc_stats;
-	struct bfi_ll_stats_rad		rad_stats;
-	struct bfi_ll_stats_fc_rx	fc_rx_stats;
-	struct bfi_ll_stats_fc_tx	fc_tx_stats;
-	struct bfi_ll_stats_rxf	rxf_stats[BFI_LL_RXF_ID_MAX];
-	struct bfi_ll_stats_txf	txf_stats[BFI_LL_TXF_ID_MAX];
-};
-
-#pragma pack()
-
-#endif  /* __BFI_LL_H__ */

drivers/net/bna/bna_ctrl.c

@@ -1,3076 +0,0 @@
-/*
- * Linux network driver for Brocade Converged Network Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- */
-#include "bna.h"
-#include "bfa_cs.h"
-
-static void bna_device_cb_port_stopped(void *arg, enum bna_cb_status status);
-
-static void
-bna_port_cb_link_up(struct bna_port *port, struct bfi_ll_aen *aen,
-			int status)
-{
-	int i;
-	u8 prio_map;
-
-	port->llport.link_status = BNA_LINK_UP;
-	if (aen->cee_linkup)
-		port->llport.link_status = BNA_CEE_UP;
-
-	/* Compute the priority */
-	prio_map = aen->prio_map;
-	if (prio_map) {
-		for (i = 0; i < 8; i++) {
-			if ((prio_map >> i) & 0x1)
-				break;
-		}
-		port->priority = i;
-	} else
-		port->priority = 0;
-
-	/* Dispatch events */
-	bna_tx_mod_cee_link_status(&port->bna->tx_mod, aen->cee_linkup);
-	bna_tx_mod_prio_changed(&port->bna->tx_mod, port->priority);
-	port->link_cbfn(port->bna->bnad, port->llport.link_status);
-}
-
-static void
-bna_port_cb_link_down(struct bna_port *port, int status)
-{
-	port->llport.link_status = BNA_LINK_DOWN;
-
-	/* Dispatch events */
-	bna_tx_mod_cee_link_status(&port->bna->tx_mod, BNA_LINK_DOWN);
-	port->link_cbfn(port->bna->bnad, BNA_LINK_DOWN);
-}
-
-static inline int
-llport_can_be_up(struct bna_llport *llport)
-{
-	int ready = 0;
-	if (llport->type == BNA_PORT_T_REGULAR)
-		ready = ((llport->flags & BNA_LLPORT_F_ADMIN_UP) &&
-			 (llport->flags & BNA_LLPORT_F_RX_STARTED) &&
-			 (llport->flags & BNA_LLPORT_F_PORT_ENABLED));
-	else
-		ready = ((llport->flags & BNA_LLPORT_F_ADMIN_UP) &&
-			 (llport->flags & BNA_LLPORT_F_RX_STARTED) &&
-			 !(llport->flags & BNA_LLPORT_F_PORT_ENABLED));
-	return ready;
-}
-
-#define llport_is_up llport_can_be_up
-
-enum bna_llport_event {
-	LLPORT_E_START			= 1,
-	LLPORT_E_STOP			= 2,
-	LLPORT_E_FAIL			= 3,
-	LLPORT_E_UP			= 4,
-	LLPORT_E_DOWN			= 5,
-	LLPORT_E_FWRESP_UP_OK		= 6,
-	LLPORT_E_FWRESP_UP_FAIL		= 7,
-	LLPORT_E_FWRESP_DOWN		= 8
-};
-
-static void
-bna_llport_cb_port_enabled(struct bna_llport *llport)
-{
-	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
-
-	if (llport_can_be_up(llport))
-		bfa_fsm_send_event(llport, LLPORT_E_UP);
-}
-
-static void
-bna_llport_cb_port_disabled(struct bna_llport *llport)
-{
-	int llport_up = llport_is_up(llport);
-
-	llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
-
-	if (llport_up)
-		bfa_fsm_send_event(llport, LLPORT_E_DOWN);
-}
-
-/**
- * MBOX
- */
-static int
-bna_is_aen(u8 msg_id)
-{
-	switch (msg_id) {
-	case BFI_LL_I2H_LINK_DOWN_AEN:
-	case BFI_LL_I2H_LINK_UP_AEN:
-	case BFI_LL_I2H_PORT_ENABLE_AEN:
-	case BFI_LL_I2H_PORT_DISABLE_AEN:
-		return 1;
-
-	default:
-		return 0;
-	}
-}
-
-static void
-bna_mbox_aen_callback(struct bna *bna, struct bfi_mbmsg *msg)
-{
-	struct bfi_ll_aen *aen = (struct bfi_ll_aen *)(msg);
-
-	switch (aen->mh.msg_id) {
-	case BFI_LL_I2H_LINK_UP_AEN:
-		bna_port_cb_link_up(&bna->port, aen, aen->reason);
-		break;
-	case BFI_LL_I2H_LINK_DOWN_AEN:
-		bna_port_cb_link_down(&bna->port, aen->reason);
-		break;
-	case BFI_LL_I2H_PORT_ENABLE_AEN:
-		bna_llport_cb_port_enabled(&bna->port.llport);
-		break;
-	case BFI_LL_I2H_PORT_DISABLE_AEN:
-		bna_llport_cb_port_disabled(&bna->port.llport);
-		break;
-	default:
-		break;
-	}
-}
-
-static void
-bna_ll_isr(void *llarg, struct bfi_mbmsg *msg)
-{
-	struct bna *bna = (struct bna *)(llarg);
-	struct bfi_ll_rsp *mb_rsp = (struct bfi_ll_rsp *)(msg);
-	struct bfi_mhdr *cmd_h, *rsp_h;
-	struct bna_mbox_qe *mb_qe = NULL;
-	int to_post = 0;
-	u8 aen = 0;
-	char message[BNA_MESSAGE_SIZE];
-
-	aen = bna_is_aen(mb_rsp->mh.msg_id);
-
-	if (!aen) {
-		mb_qe = bfa_q_first(&bna->mbox_mod.posted_q);
-		cmd_h = (struct bfi_mhdr *)(&mb_qe->cmd.msg[0]);
-		rsp_h = (struct bfi_mhdr *)(&mb_rsp->mh);
-
-		if ((BFA_I2HM(cmd_h->msg_id) == rsp_h->msg_id) &&
-		    (cmd_h->mtag.i2htok == rsp_h->mtag.i2htok)) {
-			/* Remove the request from posted_q, update state  */
-			list_del(&mb_qe->qe);
-			bna->mbox_mod.msg_pending--;
-			if (list_empty(&bna->mbox_mod.posted_q))
-				bna->mbox_mod.state = BNA_MBOX_FREE;
-			else
-				to_post = 1;
-
-			/* Dispatch the cbfn */
-			if (mb_qe->cbfn)
-				mb_qe->cbfn(mb_qe->cbarg, mb_rsp->error);
-
-			/* Post the next entry, if needed */
-			if (to_post) {
-				mb_qe = bfa_q_first(&bna->mbox_mod.posted_q);
-				bfa_nw_ioc_mbox_queue(&bna->device.ioc,
-							&mb_qe->cmd);
-			}
-		} else {
-			snprintf(message, BNA_MESSAGE_SIZE,
-				       "No matching rsp for [%d:%d:%d]\n",
-				       mb_rsp->mh.msg_class, mb_rsp->mh.msg_id,
-				       mb_rsp->mh.mtag.i2htok);
-		pr_info("%s", message);
-		}
-
-	} else
-		bna_mbox_aen_callback(bna, msg);
-}
-
-static void
-bna_err_handler(struct bna *bna, u32 intr_status)
-{
-	u32 init_halt;
-
-	if (intr_status & __HALT_STATUS_BITS) {
-		init_halt = readl(bna->device.ioc.ioc_regs.ll_halt);
-		init_halt &= ~__FW_INIT_HALT_P;
-		writel(init_halt, bna->device.ioc.ioc_regs.ll_halt);
-	}
-
-	bfa_nw_ioc_error_isr(&bna->device.ioc);
-}
-
-void
-bna_mbox_handler(struct bna *bna, u32 intr_status)
-{
-	if (BNA_IS_ERR_INTR(intr_status)) {
-		bna_err_handler(bna, intr_status);
-		return;
-	}
-	if (BNA_IS_MBOX_INTR(intr_status))
-		bfa_nw_ioc_mbox_isr(&bna->device.ioc);
-}
-
-void
-bna_mbox_send(struct bna *bna, struct bna_mbox_qe *mbox_qe)
-{
-	struct bfi_mhdr *mh;
-
-	mh = (struct bfi_mhdr *)(&mbox_qe->cmd.msg[0]);
-
-	mh->mtag.i2htok = htons(bna->mbox_mod.msg_ctr);
-	bna->mbox_mod.msg_ctr++;
-	bna->mbox_mod.msg_pending++;
-	if (bna->mbox_mod.state == BNA_MBOX_FREE) {
-		list_add_tail(&mbox_qe->qe, &bna->mbox_mod.posted_q);
-		bfa_nw_ioc_mbox_queue(&bna->device.ioc, &mbox_qe->cmd);
-		bna->mbox_mod.state = BNA_MBOX_POSTED;
-	} else {
-		list_add_tail(&mbox_qe->qe, &bna->mbox_mod.posted_q);
-	}
-}
-
-static void
-bna_mbox_flush_q(struct bna *bna, struct list_head *q)
-{
-	struct bna_mbox_qe *mb_qe = NULL;
-	struct list_head			*mb_q;
-	void 			(*cbfn)(void *arg, int status);
-	void 			*cbarg;
-
-	mb_q = &bna->mbox_mod.posted_q;
-
-	while (!list_empty(mb_q)) {
-		bfa_q_deq(mb_q, &mb_qe);
-		cbfn = mb_qe->cbfn;
-		cbarg = mb_qe->cbarg;
-		bfa_q_qe_init(mb_qe);
-		bna->mbox_mod.msg_pending--;
-
-		if (cbfn)
-			cbfn(cbarg, BNA_CB_NOT_EXEC);
-	}
-
-	bna->mbox_mod.state = BNA_MBOX_FREE;
-}
-
-static void
-bna_mbox_mod_start(struct bna_mbox_mod *mbox_mod)
-{
-}
-
-static void
-bna_mbox_mod_stop(struct bna_mbox_mod *mbox_mod)
-{
-	bna_mbox_flush_q(mbox_mod->bna, &mbox_mod->posted_q);
-}
-
-static void
-bna_mbox_mod_init(struct bna_mbox_mod *mbox_mod, struct bna *bna)
-{
-	bfa_nw_ioc_mbox_regisr(&bna->device.ioc, BFI_MC_LL, bna_ll_isr, bna);
-	mbox_mod->state = BNA_MBOX_FREE;
-	mbox_mod->msg_ctr = mbox_mod->msg_pending = 0;
-	INIT_LIST_HEAD(&mbox_mod->posted_q);
-	mbox_mod->bna = bna;
-}
-
-static void
-bna_mbox_mod_uninit(struct bna_mbox_mod *mbox_mod)
-{
-	mbox_mod->bna = NULL;
-}
-
-/**
- * LLPORT
- */
-#define call_llport_stop_cbfn(llport, status)\
-do {\
-	if ((llport)->stop_cbfn)\
-		(llport)->stop_cbfn(&(llport)->bna->port, status);\
-	(llport)->stop_cbfn = NULL;\
-} while (0)
-
-static void bna_fw_llport_up(struct bna_llport *llport);
-static void bna_fw_cb_llport_up(void *arg, int status);
-static void bna_fw_llport_down(struct bna_llport *llport);
-static void bna_fw_cb_llport_down(void *arg, int status);
-static void bna_llport_start(struct bna_llport *llport);
-static void bna_llport_stop(struct bna_llport *llport);
-static void bna_llport_fail(struct bna_llport *llport);
-
-enum bna_llport_state {
-	BNA_LLPORT_STOPPED		= 1,
-	BNA_LLPORT_DOWN			= 2,
-	BNA_LLPORT_UP_RESP_WAIT		= 3,
-	BNA_LLPORT_DOWN_RESP_WAIT	= 4,
-	BNA_LLPORT_UP			= 5,
-	BNA_LLPORT_LAST_RESP_WAIT 	= 6
-};
-
-bfa_fsm_state_decl(bna_llport, stopped, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, down, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, up_resp_wait, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, down_resp_wait, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, up, struct bna_llport,
-			enum bna_llport_event);
-bfa_fsm_state_decl(bna_llport, last_resp_wait, struct bna_llport,
-			enum bna_llport_event);
-
-static struct bfa_sm_table llport_sm_table[] = {
-	{BFA_SM(bna_llport_sm_stopped), BNA_LLPORT_STOPPED},
-	{BFA_SM(bna_llport_sm_down), BNA_LLPORT_DOWN},
-	{BFA_SM(bna_llport_sm_up_resp_wait), BNA_LLPORT_UP_RESP_WAIT},
-	{BFA_SM(bna_llport_sm_down_resp_wait), BNA_LLPORT_DOWN_RESP_WAIT},
-	{BFA_SM(bna_llport_sm_up), BNA_LLPORT_UP},
-	{BFA_SM(bna_llport_sm_last_resp_wait), BNA_LLPORT_LAST_RESP_WAIT}
-};
-
-static void
-bna_llport_sm_stopped_entry(struct bna_llport *llport)
-{
-	llport->bna->port.link_cbfn((llport)->bna->bnad, BNA_LINK_DOWN);
-	call_llport_stop_cbfn(llport, BNA_CB_SUCCESS);
-}
-
-static void
-bna_llport_sm_stopped(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_START:
-		bfa_fsm_set_state(llport, bna_llport_sm_down);
-		break;
-
-	case LLPORT_E_STOP:
-		call_llport_stop_cbfn(llport, BNA_CB_SUCCESS);
-		break;
-
-	case LLPORT_E_FAIL:
-		break;
-
-	case LLPORT_E_DOWN:
-		/* This event is received due to Rx objects failing */
-		/* No-op */
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-	case LLPORT_E_FWRESP_DOWN:
-		/**
-		 * These events are received due to flushing of mbox when
-		 * device fails
-		 */
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_down_entry(struct bna_llport *llport)
-{
-	bnad_cb_port_link_status((llport)->bna->bnad, BNA_LINK_DOWN);
-}
-
-static void
-bna_llport_sm_down(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_UP:
-		bfa_fsm_set_state(llport, bna_llport_sm_up_resp_wait);
-		bna_fw_llport_up(llport);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_up_resp_wait_entry(struct bna_llport *llport)
-{
-	BUG_ON(!llport_can_be_up(llport));
-	/**
-	 * NOTE: Do not call bna_fw_llport_up() here. That will over step
-	 * mbox due to down_resp_wait -> up_resp_wait transition on event
-	 * LLPORT_E_UP
-	 */
-}
-
-static void
-bna_llport_sm_up_resp_wait(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_last_resp_wait);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_down_resp_wait);
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-		bfa_fsm_set_state(llport, bna_llport_sm_up);
-		break;
-
-	case LLPORT_E_FWRESP_UP_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_down);
-		break;
-
-	case LLPORT_E_FWRESP_DOWN:
-		/* down_resp_wait -> up_resp_wait transition on LLPORT_E_UP */
-		bna_fw_llport_up(llport);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_down_resp_wait_entry(struct bna_llport *llport)
-{
-	/**
-	 * NOTE: Do not call bna_fw_llport_down() here. That will over step
-	 * mbox due to up_resp_wait -> down_resp_wait transition on event
-	 * LLPORT_E_DOWN
-	 */
-}
-
-static void
-bna_llport_sm_down_resp_wait(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_last_resp_wait);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_UP:
-		bfa_fsm_set_state(llport, bna_llport_sm_up_resp_wait);
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-		/* up_resp_wait->down_resp_wait transition on LLPORT_E_DOWN */
-		bna_fw_llport_down(llport);
-		break;
-
-	case LLPORT_E_FWRESP_UP_FAIL:
-	case LLPORT_E_FWRESP_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_down);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_up_entry(struct bna_llport *llport)
-{
-}
-
-static void
-bna_llport_sm_up(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_STOP:
-		bfa_fsm_set_state(llport, bna_llport_sm_last_resp_wait);
-		bna_fw_llport_down(llport);
-		break;
-
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_down_resp_wait);
-		bna_fw_llport_down(llport);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_llport_sm_last_resp_wait_entry(struct bna_llport *llport)
-{
-}
-
-static void
-bna_llport_sm_last_resp_wait(struct bna_llport *llport,
-			enum bna_llport_event event)
-{
-	switch (event) {
-	case LLPORT_E_FAIL:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	case LLPORT_E_DOWN:
-		/**
-		 * This event is received due to Rx objects stopping in
-		 * parallel to llport
-		 */
-		/* No-op */
-		break;
-
-	case LLPORT_E_FWRESP_UP_OK:
-		/* up_resp_wait->last_resp_wait transition on LLPORT_T_STOP */
-		bna_fw_llport_down(llport);
-		break;
-
-	case LLPORT_E_FWRESP_UP_FAIL:
-	case LLPORT_E_FWRESP_DOWN:
-		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_fw_llport_admin_up(struct bna_llport *llport)
-{
-	struct bfi_ll_port_admin_req ll_req;
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_PORT_ADMIN_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-
-	ll_req.up = BNA_STATUS_T_ENABLED;
-
-	bna_mbox_qe_fill(&llport->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_fw_cb_llport_up, llport);
-
-	bna_mbox_send(llport->bna, &llport->mbox_qe);
-}
-
-static void
-bna_fw_llport_up(struct bna_llport *llport)
-{
-	if (llport->type == BNA_PORT_T_REGULAR)
-		bna_fw_llport_admin_up(llport);
-}
-
-static void
-bna_fw_cb_llport_up(void *arg, int status)
-{
-	struct bna_llport *llport = (struct bna_llport *)arg;
-
-	bfa_q_qe_init(&llport->mbox_qe.qe);
-	if (status == BFI_LL_CMD_FAIL) {
-		if (llport->type == BNA_PORT_T_REGULAR)
-			llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
-		else
-			llport->flags &= ~BNA_LLPORT_F_ADMIN_UP;
-		bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP_FAIL);
-	} else
-		bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP_OK);
-}
-
-static void
-bna_fw_llport_admin_down(struct bna_llport *llport)
-{
-	struct bfi_ll_port_admin_req ll_req;
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_PORT_ADMIN_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-
-	ll_req.up = BNA_STATUS_T_DISABLED;
-
-	bna_mbox_qe_fill(&llport->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_fw_cb_llport_down, llport);
-
-	bna_mbox_send(llport->bna, &llport->mbox_qe);
-}
-
-static void
-bna_fw_llport_down(struct bna_llport *llport)
-{
-	if (llport->type == BNA_PORT_T_REGULAR)
-		bna_fw_llport_admin_down(llport);
-}
-
-static void
-bna_fw_cb_llport_down(void *arg, int status)
-{
-	struct bna_llport *llport = (struct bna_llport *)arg;
-
-	bfa_q_qe_init(&llport->mbox_qe.qe);
-	bfa_fsm_send_event(llport, LLPORT_E_FWRESP_DOWN);
-}
-
-static void
-bna_port_cb_llport_stopped(struct bna_port *port,
-				enum bna_cb_status status)
-{
-	bfa_wc_down(&port->chld_stop_wc);
-}
-
-static void
-bna_llport_init(struct bna_llport *llport, struct bna *bna)
-{
-	llport->flags |= BNA_LLPORT_F_ADMIN_UP;
-	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
-	llport->type = BNA_PORT_T_REGULAR;
-	llport->bna = bna;
-
-	llport->link_status = BNA_LINK_DOWN;
-
-	llport->rx_started_count = 0;
-
-	llport->stop_cbfn = NULL;
-
-	bfa_q_qe_init(&llport->mbox_qe.qe);
-
-	bfa_fsm_set_state(llport, bna_llport_sm_stopped);
-}
-
-static void
-bna_llport_uninit(struct bna_llport *llport)
-{
-	llport->flags &= ~BNA_LLPORT_F_ADMIN_UP;
-	llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
-
-	llport->bna = NULL;
-}
-
-static void
-bna_llport_start(struct bna_llport *llport)
-{
-	bfa_fsm_send_event(llport, LLPORT_E_START);
-}
-
-static void
-bna_llport_stop(struct bna_llport *llport)
-{
-	llport->stop_cbfn = bna_port_cb_llport_stopped;
-
-	bfa_fsm_send_event(llport, LLPORT_E_STOP);
-}
-
-static void
-bna_llport_fail(struct bna_llport *llport)
-{
-	/* Reset the physical port status to enabled */
-	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
-	bfa_fsm_send_event(llport, LLPORT_E_FAIL);
-}
-
-static int
-bna_llport_state_get(struct bna_llport *llport)
-{
-	return bfa_sm_to_state(llport_sm_table, llport->fsm);
-}
-
-void
-bna_llport_rx_started(struct bna_llport *llport)
-{
-	llport->rx_started_count++;
-
-	if (llport->rx_started_count == 1) {
-
-		llport->flags |= BNA_LLPORT_F_RX_STARTED;
-
-		if (llport_can_be_up(llport))
-			bfa_fsm_send_event(llport, LLPORT_E_UP);
-	}
-}
-
-void
-bna_llport_rx_stopped(struct bna_llport *llport)
-{
-	int llport_up = llport_is_up(llport);
-
-	llport->rx_started_count--;
-
-	if (llport->rx_started_count == 0) {
-
-		llport->flags &= ~BNA_LLPORT_F_RX_STARTED;
-
-		if (llport_up)
-			bfa_fsm_send_event(llport, LLPORT_E_DOWN);
-	}
-}
-
-/**
- * PORT
- */
-#define bna_port_chld_start(port)\
-do {\
-	enum bna_tx_type tx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_TX_T_REGULAR : BNA_TX_T_LOOPBACK;\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bna_llport_start(&(port)->llport);\
-	bna_tx_mod_start(&(port)->bna->tx_mod, tx_type);\
-	bna_rx_mod_start(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define bna_port_chld_stop(port)\
-do {\
-	enum bna_tx_type tx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_TX_T_REGULAR : BNA_TX_T_LOOPBACK;\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bna_llport_stop(&(port)->llport);\
-	bna_tx_mod_stop(&(port)->bna->tx_mod, tx_type);\
-	bna_rx_mod_stop(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define bna_port_chld_fail(port)\
-do {\
-	bna_llport_fail(&(port)->llport);\
-	bna_tx_mod_fail(&(port)->bna->tx_mod);\
-	bna_rx_mod_fail(&(port)->bna->rx_mod);\
-} while (0)
-
-#define bna_port_rx_start(port)\
-do {\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bna_rx_mod_start(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define bna_port_rx_stop(port)\
-do {\
-	enum bna_rx_type rx_type = ((port)->type == BNA_PORT_T_REGULAR) ?\
-					BNA_RX_T_REGULAR : BNA_RX_T_LOOPBACK;\
-	bfa_wc_up(&(port)->chld_stop_wc);\
-	bna_rx_mod_stop(&(port)->bna->rx_mod, rx_type);\
-} while (0)
-
-#define call_port_stop_cbfn(port, status)\
-do {\
-	if ((port)->stop_cbfn)\
-		(port)->stop_cbfn((port)->stop_cbarg, status);\
-	(port)->stop_cbfn = NULL;\
-	(port)->stop_cbarg = NULL;\
-} while (0)
-
-#define call_port_pause_cbfn(port, status)\
-do {\
-	if ((port)->pause_cbfn)\
-		(port)->pause_cbfn((port)->bna->bnad, status);\
-	(port)->pause_cbfn = NULL;\
-} while (0)
-
-#define call_port_mtu_cbfn(port, status)\
-do {\
-	if ((port)->mtu_cbfn)\
-		(port)->mtu_cbfn((port)->bna->bnad, status);\
-	(port)->mtu_cbfn = NULL;\
-} while (0)
-
-static void bna_fw_pause_set(struct bna_port *port);
-static void bna_fw_cb_pause_set(void *arg, int status);
-static void bna_fw_mtu_set(struct bna_port *port);
-static void bna_fw_cb_mtu_set(void *arg, int status);
-
-enum bna_port_event {
-	PORT_E_START			= 1,
-	PORT_E_STOP			= 2,
-	PORT_E_FAIL			= 3,
-	PORT_E_PAUSE_CFG		= 4,
-	PORT_E_MTU_CFG			= 5,
-	PORT_E_CHLD_STOPPED		= 6,
-	PORT_E_FWRESP_PAUSE		= 7,
-	PORT_E_FWRESP_MTU		= 8
-};
-
-enum bna_port_state {
-	BNA_PORT_STOPPED		= 1,
-	BNA_PORT_MTU_INIT_WAIT		= 2,
-	BNA_PORT_PAUSE_INIT_WAIT	= 3,
-	BNA_PORT_LAST_RESP_WAIT		= 4,
-	BNA_PORT_STARTED		= 5,
-	BNA_PORT_PAUSE_CFG_WAIT		= 6,
-	BNA_PORT_RX_STOP_WAIT		= 7,
-	BNA_PORT_MTU_CFG_WAIT 		= 8,
-	BNA_PORT_CHLD_STOP_WAIT		= 9
-};
-
-bfa_fsm_state_decl(bna_port, stopped, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, mtu_init_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, pause_init_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, last_resp_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, started, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, pause_cfg_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, rx_stop_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, mtu_cfg_wait, struct bna_port,
-			enum bna_port_event);
-bfa_fsm_state_decl(bna_port, chld_stop_wait, struct bna_port,
-			enum bna_port_event);
-
-static struct bfa_sm_table port_sm_table[] = {
-	{BFA_SM(bna_port_sm_stopped), BNA_PORT_STOPPED},
-	{BFA_SM(bna_port_sm_mtu_init_wait), BNA_PORT_MTU_INIT_WAIT},
-	{BFA_SM(bna_port_sm_pause_init_wait), BNA_PORT_PAUSE_INIT_WAIT},
-	{BFA_SM(bna_port_sm_last_resp_wait), BNA_PORT_LAST_RESP_WAIT},
-	{BFA_SM(bna_port_sm_started), BNA_PORT_STARTED},
-	{BFA_SM(bna_port_sm_pause_cfg_wait), BNA_PORT_PAUSE_CFG_WAIT},
-	{BFA_SM(bna_port_sm_rx_stop_wait), BNA_PORT_RX_STOP_WAIT},
-	{BFA_SM(bna_port_sm_mtu_cfg_wait), BNA_PORT_MTU_CFG_WAIT},
-	{BFA_SM(bna_port_sm_chld_stop_wait), BNA_PORT_CHLD_STOP_WAIT}
-};
-
-static void
-bna_port_sm_stopped_entry(struct bna_port *port)
-{
-	call_port_pause_cbfn(port, BNA_CB_SUCCESS);
-	call_port_mtu_cbfn(port, BNA_CB_SUCCESS);
-	call_port_stop_cbfn(port, BNA_CB_SUCCESS);
-}
-
-static void
-bna_port_sm_stopped(struct bna_port *port, enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_START:
-		bfa_fsm_set_state(port, bna_port_sm_mtu_init_wait);
-		break;
-
-	case PORT_E_STOP:
-		call_port_stop_cbfn(port, BNA_CB_SUCCESS);
-		break;
-
-	case PORT_E_FAIL:
-		/* No-op */
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		call_port_pause_cbfn(port, BNA_CB_SUCCESS);
-		break;
-
-	case PORT_E_MTU_CFG:
-		call_port_mtu_cbfn(port, BNA_CB_SUCCESS);
-		break;
-
-	case PORT_E_CHLD_STOPPED:
-		/**
-		 * This event is received due to LLPort, Tx and Rx objects
-		 * failing
-		 */
-		/* No-op */
-		break;
-
-	case PORT_E_FWRESP_PAUSE:
-	case PORT_E_FWRESP_MTU:
-		/**
-		 * These events are received due to flushing of mbox when
-		 * device fails
-		 */
-		/* No-op */
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_mtu_init_wait_entry(struct bna_port *port)
-{
-	bna_fw_mtu_set(port);
-}
-
-static void
-bna_port_sm_mtu_init_wait(struct bna_port *port, enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_STOP:
-		bfa_fsm_set_state(port, bna_port_sm_last_resp_wait);
-		break;
-
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		/* No-op */
-		break;
-
-	case PORT_E_MTU_CFG:
-		port->flags |= BNA_PORT_F_MTU_CHANGED;
-		break;
-
-	case PORT_E_FWRESP_MTU:
-		if (port->flags & BNA_PORT_F_MTU_CHANGED) {
-			port->flags &= ~BNA_PORT_F_MTU_CHANGED;
-			bna_fw_mtu_set(port);
-		} else {
-			bfa_fsm_set_state(port, bna_port_sm_pause_init_wait);
-		}
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_pause_init_wait_entry(struct bna_port *port)
-{
-	bna_fw_pause_set(port);
-}
-
-static void
-bna_port_sm_pause_init_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_STOP:
-		bfa_fsm_set_state(port, bna_port_sm_last_resp_wait);
-		break;
-
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		port->flags |= BNA_PORT_F_PAUSE_CHANGED;
-		break;
-
-	case PORT_E_MTU_CFG:
-		port->flags |= BNA_PORT_F_MTU_CHANGED;
-		break;
-
-	case PORT_E_FWRESP_PAUSE:
-		if (port->flags & BNA_PORT_F_PAUSE_CHANGED) {
-			port->flags &= ~BNA_PORT_F_PAUSE_CHANGED;
-			bna_fw_pause_set(port);
-		} else if (port->flags & BNA_PORT_F_MTU_CHANGED) {
-			port->flags &= ~BNA_PORT_F_MTU_CHANGED;
-			bfa_fsm_set_state(port, bna_port_sm_mtu_init_wait);
-		} else {
-			bfa_fsm_set_state(port, bna_port_sm_started);
-			bna_port_chld_start(port);
-		}
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_last_resp_wait_entry(struct bna_port *port)
-{
-}
-
-static void
-bna_port_sm_last_resp_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-	case PORT_E_FWRESP_PAUSE:
-	case PORT_E_FWRESP_MTU:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_started_entry(struct bna_port *port)
-{
-	/**
-	 * NOTE: Do not call bna_port_chld_start() here, since it will be
-	 * inadvertently called during pause_cfg_wait->started transition
-	 * as well
-	 */
-	call_port_pause_cbfn(port, BNA_CB_SUCCESS);
-	call_port_mtu_cbfn(port, BNA_CB_SUCCESS);
-}
-
-static void
-bna_port_sm_started(struct bna_port *port,
-			enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_STOP:
-		bfa_fsm_set_state(port, bna_port_sm_chld_stop_wait);
-		break;
-
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_PAUSE_CFG:
-		bfa_fsm_set_state(port, bna_port_sm_pause_cfg_wait);
-		break;
-
-	case PORT_E_MTU_CFG:
-		bfa_fsm_set_state(port, bna_port_sm_rx_stop_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_pause_cfg_wait_entry(struct bna_port *port)
-{
-	bna_fw_pause_set(port);
-}
-
-static void
-bna_port_sm_pause_cfg_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_FWRESP_PAUSE:
-		bfa_fsm_set_state(port, bna_port_sm_started);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_rx_stop_wait_entry(struct bna_port *port)
-{
-	bna_port_rx_stop(port);
-}
-
-static void
-bna_port_sm_rx_stop_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_CHLD_STOPPED:
-		bfa_fsm_set_state(port, bna_port_sm_mtu_cfg_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_mtu_cfg_wait_entry(struct bna_port *port)
-{
-	bna_fw_mtu_set(port);
-}
-
-static void
-bna_port_sm_mtu_cfg_wait(struct bna_port *port, enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_FWRESP_MTU:
-		bfa_fsm_set_state(port, bna_port_sm_started);
-		bna_port_rx_start(port);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_port_sm_chld_stop_wait_entry(struct bna_port *port)
-{
-	bna_port_chld_stop(port);
-}
-
-static void
-bna_port_sm_chld_stop_wait(struct bna_port *port,
-				enum bna_port_event event)
-{
-	switch (event) {
-	case PORT_E_FAIL:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		bna_port_chld_fail(port);
-		break;
-
-	case PORT_E_CHLD_STOPPED:
-		bfa_fsm_set_state(port, bna_port_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_fw_pause_set(struct bna_port *port)
-{
-	struct bfi_ll_set_pause_req ll_req;
-
-	memset(&ll_req, 0, sizeof(ll_req));
-	ll_req.mh.msg_class = BFI_MC_LL;
-	ll_req.mh.msg_id = BFI_LL_H2I_SET_PAUSE_REQ;
-	ll_req.mh.mtag.h2i.lpu_id = 0;
-
-	ll_req.tx_pause = port->pause_config.tx_pause;
-	ll_req.rx_pause = port->pause_config.rx_pause;
-
-	bna_mbox_qe_fill(&port->mbox_qe, &ll_req, sizeof(ll_req),
-			bna_fw_cb_pause_set, port);
-
-	bna_mbox_send(port->bna, &port->mbox_qe);
-}
-
-static void
-bna_fw_cb_pause_set(void *arg, int status)
-{
-	struct bna_port *port = (struct bna_port *)arg;
-
-	bfa_q_qe_init(&port->mbox_qe.qe);
-	bfa_fsm_send_event(port, PORT_E_FWRESP_PAUSE);
-}
-
-void
-bna_fw_mtu_set(struct bna_port *port)
-{
-	struct bfi_ll_mtu_info_req ll_req;
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_MTU_INFO_REQ, 0);
-	ll_req.mtu = htons((u16)port->mtu);
-
-	bna_mbox_qe_fill(&port->mbox_qe, &ll_req, sizeof(ll_req),
-				bna_fw_cb_mtu_set, port);
-	bna_mbox_send(port->bna, &port->mbox_qe);
-}
-
-void
-bna_fw_cb_mtu_set(void *arg, int status)
-{
-	struct bna_port *port = (struct bna_port *)arg;
-
-	bfa_q_qe_init(&port->mbox_qe.qe);
-	bfa_fsm_send_event(port, PORT_E_FWRESP_MTU);
-}
-
-static void
-bna_port_cb_chld_stopped(void *arg)
-{
-	struct bna_port *port = (struct bna_port *)arg;
-
-	bfa_fsm_send_event(port, PORT_E_CHLD_STOPPED);
-}
-
-static void
-bna_port_init(struct bna_port *port, struct bna *bna)
-{
-	port->bna = bna;
-	port->flags = 0;
-	port->mtu = 0;
-	port->type = BNA_PORT_T_REGULAR;
-
-	port->link_cbfn = bnad_cb_port_link_status;
-
-	port->chld_stop_wc.wc_resume = bna_port_cb_chld_stopped;
-	port->chld_stop_wc.wc_cbarg = port;
-	port->chld_stop_wc.wc_count = 0;
-
-	port->stop_cbfn = NULL;
-	port->stop_cbarg = NULL;
-
-	port->pause_cbfn = NULL;
-
-	port->mtu_cbfn = NULL;
-
-	bfa_q_qe_init(&port->mbox_qe.qe);
-
-	bfa_fsm_set_state(port, bna_port_sm_stopped);
-
-	bna_llport_init(&port->llport, bna);
-}
-
-static void
-bna_port_uninit(struct bna_port *port)
-{
-	bna_llport_uninit(&port->llport);
-
-	port->flags = 0;
-
-	port->bna = NULL;
-}
-
-static int
-bna_port_state_get(struct bna_port *port)
-{
-	return bfa_sm_to_state(port_sm_table, port->fsm);
-}
-
-static void
-bna_port_start(struct bna_port *port)
-{
-	port->flags |= BNA_PORT_F_DEVICE_READY;
-	if (port->flags & BNA_PORT_F_ENABLED)
-		bfa_fsm_send_event(port, PORT_E_START);
-}
-
-static void
-bna_port_stop(struct bna_port *port)
-{
-	port->stop_cbfn = bna_device_cb_port_stopped;
-	port->stop_cbarg = &port->bna->device;
-
-	port->flags &= ~BNA_PORT_F_DEVICE_READY;
-	bfa_fsm_send_event(port, PORT_E_STOP);
-}
-
-static void
-bna_port_fail(struct bna_port *port)
-{
-	port->flags &= ~BNA_PORT_F_DEVICE_READY;
-	bfa_fsm_send_event(port, PORT_E_FAIL);
-}
-
-void
-bna_port_cb_tx_stopped(struct bna_port *port, enum bna_cb_status status)
-{
-	bfa_wc_down(&port->chld_stop_wc);
-}
-
-void
-bna_port_cb_rx_stopped(struct bna_port *port, enum bna_cb_status status)
-{
-	bfa_wc_down(&port->chld_stop_wc);
-}
-
-int
-bna_port_mtu_get(struct bna_port *port)
-{
-	return port->mtu;
-}
-
-void
-bna_port_enable(struct bna_port *port)
-{
-	if (port->fsm != (bfa_sm_t)bna_port_sm_stopped)
-		return;
-
-	port->flags |= BNA_PORT_F_ENABLED;
-
-	if (port->flags & BNA_PORT_F_DEVICE_READY)
-		bfa_fsm_send_event(port, PORT_E_START);
-}
-
-void
-bna_port_disable(struct bna_port *port, enum bna_cleanup_type type,
-		 void (*cbfn)(void *, enum bna_cb_status))
-{
-	if (type == BNA_SOFT_CLEANUP) {
-		(*cbfn)(port->bna->bnad, BNA_CB_SUCCESS);
-		return;
-	}
-
-	port->stop_cbfn = cbfn;
-	port->stop_cbarg = port->bna->bnad;
-
-	port->flags &= ~BNA_PORT_F_ENABLED;
-
-	bfa_fsm_send_event(port, PORT_E_STOP);
-}
-
-void
-bna_port_pause_config(struct bna_port *port,
-		      struct bna_pause_config *pause_config,
-		      void (*cbfn)(struct bnad *, enum bna_cb_status))
-{
-	port->pause_config = *pause_config;
-
-	port->pause_cbfn = cbfn;
-
-	bfa_fsm_send_event(port, PORT_E_PAUSE_CFG);
-}
-
-void
-bna_port_mtu_set(struct bna_port *port, int mtu,
-		 void (*cbfn)(struct bnad *, enum bna_cb_status))
-{
-	port->mtu = mtu;
-
-	port->mtu_cbfn = cbfn;
-
-	bfa_fsm_send_event(port, PORT_E_MTU_CFG);
-}
-
-void
-bna_port_mac_get(struct bna_port *port, mac_t *mac)
-{
-	*mac = bfa_nw_ioc_get_mac(&port->bna->device.ioc);
-}
-
-/**
- * DEVICE
- */
-#define enable_mbox_intr(_device)\
-do {\
-	u32 intr_status;\
-	bna_intr_status_get((_device)->bna, intr_status);\
-	bnad_cb_device_enable_mbox_intr((_device)->bna->bnad);\
-	bna_mbox_intr_enable((_device)->bna);\
-} while (0)
-
-#define disable_mbox_intr(_device)\
-do {\
-	bna_mbox_intr_disable((_device)->bna);\
-	bnad_cb_device_disable_mbox_intr((_device)->bna->bnad);\
-} while (0)
-
-static const struct bna_chip_regs_offset reg_offset[] =
-{{HOST_PAGE_NUM_FN0, HOSTFN0_INT_STATUS,
-	HOSTFN0_INT_MASK, HOST_MSIX_ERR_INDEX_FN0},
-{HOST_PAGE_NUM_FN1, HOSTFN1_INT_STATUS,
-	HOSTFN1_INT_MASK, HOST_MSIX_ERR_INDEX_FN1},
-{HOST_PAGE_NUM_FN2, HOSTFN2_INT_STATUS,
-	HOSTFN2_INT_MASK, HOST_MSIX_ERR_INDEX_FN2},
-{HOST_PAGE_NUM_FN3, HOSTFN3_INT_STATUS,
-	HOSTFN3_INT_MASK, HOST_MSIX_ERR_INDEX_FN3},
-};
-
-enum bna_device_event {
-	DEVICE_E_ENABLE			= 1,
-	DEVICE_E_DISABLE		= 2,
-	DEVICE_E_IOC_READY		= 3,
-	DEVICE_E_IOC_FAILED		= 4,
-	DEVICE_E_IOC_DISABLED		= 5,
-	DEVICE_E_IOC_RESET		= 6,
-	DEVICE_E_PORT_STOPPED		= 7,
-};
-
-enum bna_device_state {
-	BNA_DEVICE_STOPPED		= 1,
-	BNA_DEVICE_IOC_READY_WAIT 	= 2,
-	BNA_DEVICE_READY		= 3,
-	BNA_DEVICE_PORT_STOP_WAIT 	= 4,
-	BNA_DEVICE_IOC_DISABLE_WAIT 	= 5,
-	BNA_DEVICE_FAILED		= 6
-};
-
-bfa_fsm_state_decl(bna_device, stopped, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, ioc_ready_wait, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, ready, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, port_stop_wait, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, ioc_disable_wait, struct bna_device,
-			enum bna_device_event);
-bfa_fsm_state_decl(bna_device, failed, struct bna_device,
-			enum bna_device_event);
-
-static struct bfa_sm_table device_sm_table[] = {
-	{BFA_SM(bna_device_sm_stopped), BNA_DEVICE_STOPPED},
-	{BFA_SM(bna_device_sm_ioc_ready_wait), BNA_DEVICE_IOC_READY_WAIT},
-	{BFA_SM(bna_device_sm_ready), BNA_DEVICE_READY},
-	{BFA_SM(bna_device_sm_port_stop_wait), BNA_DEVICE_PORT_STOP_WAIT},
-	{BFA_SM(bna_device_sm_ioc_disable_wait), BNA_DEVICE_IOC_DISABLE_WAIT},
-	{BFA_SM(bna_device_sm_failed), BNA_DEVICE_FAILED},
-};
-
-static void
-bna_device_sm_stopped_entry(struct bna_device *device)
-{
-	if (device->stop_cbfn)
-		device->stop_cbfn(device->stop_cbarg, BNA_CB_SUCCESS);
-
-	device->stop_cbfn = NULL;
-	device->stop_cbarg = NULL;
-}
-
-static void
-bna_device_sm_stopped(struct bna_device *device,
-			enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_ENABLE:
-		if (device->intr_type == BNA_INTR_T_MSIX)
-			bna_mbox_msix_idx_set(device);
-		bfa_nw_ioc_enable(&device->ioc);
-		bfa_fsm_set_state(device, bna_device_sm_ioc_ready_wait);
-		break;
-
-	case DEVICE_E_DISABLE:
-		bfa_fsm_set_state(device, bna_device_sm_stopped);
-		break;
-
-	case DEVICE_E_IOC_RESET:
-		enable_mbox_intr(device);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		bfa_fsm_set_state(device, bna_device_sm_failed);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_ioc_ready_wait_entry(struct bna_device *device)
-{
-	/**
-	 * Do not call bfa_ioc_enable() here. It must be called in the
-	 * previous state due to failed -> ioc_ready_wait transition.
-	 */
-}
-
-static void
-bna_device_sm_ioc_ready_wait(struct bna_device *device,
-				enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_DISABLE:
-		if (device->ready_cbfn)
-			device->ready_cbfn(device->ready_cbarg,
-						BNA_CB_INTERRUPT);
-		device->ready_cbfn = NULL;
-		device->ready_cbarg = NULL;
-		bfa_fsm_set_state(device, bna_device_sm_ioc_disable_wait);
-		break;
-
-	case DEVICE_E_IOC_READY:
-		bfa_fsm_set_state(device, bna_device_sm_ready);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		bfa_fsm_set_state(device, bna_device_sm_failed);
-		break;
-
-	case DEVICE_E_IOC_RESET:
-		enable_mbox_intr(device);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_ready_entry(struct bna_device *device)
-{
-	bna_mbox_mod_start(&device->bna->mbox_mod);
-	bna_port_start(&device->bna->port);
-
-	if (device->ready_cbfn)
-		device->ready_cbfn(device->ready_cbarg,
-					BNA_CB_SUCCESS);
-	device->ready_cbfn = NULL;
-	device->ready_cbarg = NULL;
-}
-
-static void
-bna_device_sm_ready(struct bna_device *device, enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_DISABLE:
-		bfa_fsm_set_state(device, bna_device_sm_port_stop_wait);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		bfa_fsm_set_state(device, bna_device_sm_failed);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_port_stop_wait_entry(struct bna_device *device)
-{
-	bna_port_stop(&device->bna->port);
-}
-
-static void
-bna_device_sm_port_stop_wait(struct bna_device *device,
-				enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_PORT_STOPPED:
-		bna_mbox_mod_stop(&device->bna->mbox_mod);
-		bfa_fsm_set_state(device, bna_device_sm_ioc_disable_wait);
-		break;
-
-	case DEVICE_E_IOC_FAILED:
-		disable_mbox_intr(device);
-		bna_port_fail(&device->bna->port);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_ioc_disable_wait_entry(struct bna_device *device)
-{
-	bfa_nw_ioc_disable(&device->ioc);
-}
-
-static void
-bna_device_sm_ioc_disable_wait(struct bna_device *device,
-				enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_IOC_DISABLED:
-		disable_mbox_intr(device);
-		bfa_fsm_set_state(device, bna_device_sm_stopped);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-static void
-bna_device_sm_failed_entry(struct bna_device *device)
-{
-	disable_mbox_intr(device);
-	bna_port_fail(&device->bna->port);
-	bna_mbox_mod_stop(&device->bna->mbox_mod);
-
-	if (device->ready_cbfn)
-		device->ready_cbfn(device->ready_cbarg,
-					BNA_CB_FAIL);
-	device->ready_cbfn = NULL;
-	device->ready_cbarg = NULL;
-}
-
-static void
-bna_device_sm_failed(struct bna_device *device,
-			enum bna_device_event event)
-{
-	switch (event) {
-	case DEVICE_E_DISABLE:
-		bfa_fsm_set_state(device, bna_device_sm_ioc_disable_wait);
-		break;
-
-	case DEVICE_E_IOC_RESET:
-		enable_mbox_intr(device);
-		bfa_fsm_set_state(device, bna_device_sm_ioc_ready_wait);
-		break;
-
-	default:
-		bfa_sm_fault(event);
-	}
-}
-
-/* IOC callback functions */
-
-static void
-bna_device_cb_iocll_ready(void *dev, enum bfa_status error)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	if (error)
-		bfa_fsm_send_event(device, DEVICE_E_IOC_FAILED);
-	else
-		bfa_fsm_send_event(device, DEVICE_E_IOC_READY);
-}
-
-static void
-bna_device_cb_iocll_disabled(void *dev)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	bfa_fsm_send_event(device, DEVICE_E_IOC_DISABLED);
-}
-
-static void
-bna_device_cb_iocll_failed(void *dev)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	bfa_fsm_send_event(device, DEVICE_E_IOC_FAILED);
-}
-
-static void
-bna_device_cb_iocll_reset(void *dev)
-{
-	struct bna_device *device = (struct bna_device *)dev;
-
-	bfa_fsm_send_event(device, DEVICE_E_IOC_RESET);
-}
-
-static struct bfa_ioc_cbfn bfa_iocll_cbfn = {
-	bna_device_cb_iocll_ready,
-	bna_device_cb_iocll_disabled,
-	bna_device_cb_iocll_failed,
-	bna_device_cb_iocll_reset
-};
-
-/* device */
-static void
-bna_adv_device_init(struct bna_device *device, struct bna *bna,
-		struct bna_res_info *res_info)
-{
-	u8 *kva;
-	u64 dma;
-
-	device->bna = bna;
-
-	kva = res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mdl[0].kva;
-
-	/**
-	 * Attach common modules (Diag, SFP, CEE, Port) and claim respective
-	 * DMA memory.
-	 */
-	BNA_GET_DMA_ADDR(
-		&res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mdl[0].dma, dma);
-	kva = res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mdl[0].kva;
-
-	bfa_nw_cee_attach(&bna->cee, &device->ioc, bna);
-	bfa_nw_cee_mem_claim(&bna->cee, kva, dma);
-	kva += bfa_nw_cee_meminfo();
-	dma += bfa_nw_cee_meminfo();
-
-}
-
-static void
-bna_device_init(struct bna_device *device, struct bna *bna,
-		struct bna_res_info *res_info)
-{
-	u64 dma;
-
-	device->bna = bna;
-
-	/**
-	 * Attach IOC and claim:
-	 *	1. DMA memory for IOC attributes
-	 *	2. Kernel memory for FW trace
-	 */
-	bfa_nw_ioc_attach(&device->ioc, device, &bfa_iocll_cbfn);
-	bfa_nw_ioc_pci_init(&device->ioc, &bna->pcidev, BFI_MC_LL);
-
-	BNA_GET_DMA_ADDR(
-		&res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mdl[0].dma, dma);
-	bfa_nw_ioc_mem_claim(&device->ioc,
-		res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mdl[0].kva,
-			  dma);
-
-	bna_adv_device_init(device, bna, res_info);
-	/*
-	 * Initialize mbox_mod only after IOC, so that mbox handler
-	 * registration goes through
-	 */
-	device->intr_type =
-		res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.intr_type;
-	device->vector =
-		res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.idl[0].vector;
-	bna_mbox_mod_init(&bna->mbox_mod, bna);
-
-	device->ready_cbfn = device->stop_cbfn = NULL;
-	device->ready_cbarg = device->stop_cbarg = NULL;
-
-	bfa_fsm_set_state(device, bna_device_sm_stopped);
-}
-
-static void
-bna_device_uninit(struct bna_device *device)
-{
-	bna_mbox_mod_uninit(&device->bna->mbox_mod);
-
-	bfa_nw_ioc_detach(&device->ioc);
-
-	device->bna = NULL;
-}
-
-static void
-bna_device_cb_port_stopped(void *arg, enum bna_cb_status status)
-{
-	struct bna_device *device = (struct bna_device *)arg;
-
-	bfa_fsm_send_event(device, DEVICE_E_PORT_STOPPED);
-}
-
-static int
-bna_device_status_get(struct bna_device *device)
-{
-	return device->fsm == (bfa_fsm_t)bna_device_sm_ready;
-}
-
-void
-bna_device_enable(struct bna_device *device)
-{
-	if (device->fsm != (bfa_fsm_t)bna_device_sm_stopped) {
-		bnad_cb_device_enabled(device->bna->bnad, BNA_CB_BUSY);
-		return;
-	}
-
-	device->ready_cbfn = bnad_cb_device_enabled;
-	device->ready_cbarg = device->bna->bnad;
-
-	bfa_fsm_send_event(device, DEVICE_E_ENABLE);
-}
-
-void
-bna_device_disable(struct bna_device *device, enum bna_cleanup_type type)
-{
-	if (type == BNA_SOFT_CLEANUP) {
-		bnad_cb_device_disabled(device->bna->bnad, BNA_CB_SUCCESS);
-		return;
-	}
-
-	device->stop_cbfn = bnad_cb_device_disabled;
-	device->stop_cbarg = device->bna->bnad;
-
-	bfa_fsm_send_event(device, DEVICE_E_DISABLE);
-}
-
-static int
-bna_device_state_get(struct bna_device *device)
-{
-	return bfa_sm_to_state(device_sm_table, device->fsm);
-}
-
-const u32 bna_napi_dim_vector[BNA_LOAD_T_MAX][BNA_BIAS_T_MAX] = {
-	{12, 12},
-	{6, 10},
-	{5, 10},
-	{4, 8},
-	{3, 6},
-	{3, 6},
-	{2, 4},
-	{1, 2},
-};
-
-/* utils */
-
-static void
-bna_adv_res_req(struct bna_res_info *res_info)
-{
-	/* DMA memory for COMMON_MODULE */
-	res_info[BNA_RES_MEM_T_COM].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_COM].res_u.mem_info.len = ALIGN(
-				bfa_nw_cee_meminfo(), PAGE_SIZE);
-
-	/* Virtual memory for retreiving fw_trc */
-	res_info[BNA_RES_MEM_T_FWTRC].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mem_type = BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.num = 0;
-	res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.len = 0;
-
-	/* DMA memory for retreiving stats */
-	res_info[BNA_RES_MEM_T_STATS].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.len =
-				ALIGN(BFI_HW_STATS_SIZE, PAGE_SIZE);
-
-	/* Virtual memory for soft stats */
-	res_info[BNA_RES_MEM_T_SWSTATS].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.mem_type = BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.len =
-				sizeof(struct bna_sw_stats);
-}
-
-static void
-bna_sw_stats_get(struct bna *bna, struct bna_sw_stats *sw_stats)
-{
-	struct bna_tx *tx;
-	struct bna_txq *txq;
-	struct bna_rx *rx;
-	struct bna_rxp *rxp;
-	struct list_head *qe;
-	struct list_head *txq_qe;
-	struct list_head *rxp_qe;
-	struct list_head *mac_qe;
-	int i;
-
-	sw_stats->device_state = bna_device_state_get(&bna->device);
-	sw_stats->port_state = bna_port_state_get(&bna->port);
-	sw_stats->port_flags = bna->port.flags;
-	sw_stats->llport_state = bna_llport_state_get(&bna->port.llport);
-	sw_stats->priority = bna->port.priority;
-
-	i = 0;
-	list_for_each(qe, &bna->tx_mod.tx_active_q) {
-		tx = (struct bna_tx *)qe;
-		sw_stats->tx_stats[i].tx_state = bna_tx_state_get(tx);
-		sw_stats->tx_stats[i].tx_flags = tx->flags;
-
-		sw_stats->tx_stats[i].num_txqs = 0;
-		sw_stats->tx_stats[i].txq_bmap[0] = 0;
-		sw_stats->tx_stats[i].txq_bmap[1] = 0;
-		list_for_each(txq_qe, &tx->txq_q) {
-			txq = (struct bna_txq *)txq_qe;
-			if (txq->txq_id < 32)
-				sw_stats->tx_stats[i].txq_bmap[0] |=
-						((u32)1 << txq->txq_id);
-			else
-				sw_stats->tx_stats[i].txq_bmap[1] |=
-						((u32)
-						 1 << (txq->txq_id - 32));
-			sw_stats->tx_stats[i].num_txqs++;
-		}
-
-		sw_stats->tx_stats[i].txf_id = tx->txf.txf_id;
-
-		i++;
-	}
-	sw_stats->num_active_tx = i;
-
-	i = 0;
-	list_for_each(qe, &bna->rx_mod.rx_active_q) {
-		rx = (struct bna_rx *)qe;
-		sw_stats->rx_stats[i].rx_state = bna_rx_state_get(rx);
-		sw_stats->rx_stats[i].rx_flags = rx->rx_flags;
-
-		sw_stats->rx_stats[i].num_rxps = 0;
-		sw_stats->rx_stats[i].num_rxqs = 0;
-		sw_stats->rx_stats[i].rxq_bmap[0] = 0;
-		sw_stats->rx_stats[i].rxq_bmap[1] = 0;
-		sw_stats->rx_stats[i].cq_bmap[0] = 0;
-		sw_stats->rx_stats[i].cq_bmap[1] = 0;
-		list_for_each(rxp_qe, &rx->rxp_q) {
-			rxp = (struct bna_rxp *)rxp_qe;
-
-			sw_stats->rx_stats[i].num_rxqs += 1;
-
-			if (rxp->type == BNA_RXP_SINGLE) {
-				if (rxp->rxq.single.only->rxq_id < 32) {
-					sw_stats->rx_stats[i].rxq_bmap[0] |=
-					((u32)1 <<
-					rxp->rxq.single.only->rxq_id);
-				} else {
-					sw_stats->rx_stats[i].rxq_bmap[1] |=
-					((u32)1 <<
-					(rxp->rxq.single.only->rxq_id - 32));
-				}
-			} else {
-				if (rxp->rxq.slr.large->rxq_id < 32) {
-					sw_stats->rx_stats[i].rxq_bmap[0] |=
-					((u32)1 <<
-					rxp->rxq.slr.large->rxq_id);
-				} else {
-					sw_stats->rx_stats[i].rxq_bmap[1] |=
-					((u32)1 <<
-					(rxp->rxq.slr.large->rxq_id - 32));
-				}
-
-				if (rxp->rxq.slr.small->rxq_id < 32) {
-					sw_stats->rx_stats[i].rxq_bmap[0] |=
-					((u32)1 <<
-					rxp->rxq.slr.small->rxq_id);
-				} else {
-					sw_stats->rx_stats[i].rxq_bmap[1] |=
-				((u32)1 <<
-				 (rxp->rxq.slr.small->rxq_id - 32));
-				}
-				sw_stats->rx_stats[i].num_rxqs += 1;
-			}
-
-			if (rxp->cq.cq_id < 32)
-				sw_stats->rx_stats[i].cq_bmap[0] |=
-					(1 << rxp->cq.cq_id);
-			else
-				sw_stats->rx_stats[i].cq_bmap[1] |=
-					(1 << (rxp->cq.cq_id - 32));
-
-			sw_stats->rx_stats[i].num_rxps++;
-		}
-
-		sw_stats->rx_stats[i].rxf_id = rx->rxf.rxf_id;
-		sw_stats->rx_stats[i].rxf_state = bna_rxf_state_get(&rx->rxf);
-		sw_stats->rx_stats[i].rxf_oper_state = rx->rxf.rxf_oper_state;
-
-		sw_stats->rx_stats[i].num_active_ucast = 0;
-		if (rx->rxf.ucast_active_mac)
-			sw_stats->rx_stats[i].num_active_ucast++;
-		list_for_each(mac_qe, &rx->rxf.ucast_active_q)
-			sw_stats->rx_stats[i].num_active_ucast++;
-
-		sw_stats->rx_stats[i].num_active_mcast = 0;
-		list_for_each(mac_qe, &rx->rxf.mcast_active_q)
-			sw_stats->rx_stats[i].num_active_mcast++;
-
-		sw_stats->rx_stats[i].rxmode_active = rx->rxf.rxmode_active;
-		sw_stats->rx_stats[i].vlan_filter_status =
-						rx->rxf.vlan_filter_status;
-		memcpy(sw_stats->rx_stats[i].vlan_filter_table,
-				rx->rxf.vlan_filter_table,
-				sizeof(u32) * ((BFI_MAX_VLAN + 1) / 32));
-
-		sw_stats->rx_stats[i].rss_status = rx->rxf.rss_status;
-		sw_stats->rx_stats[i].hds_status = rx->rxf.hds_status;
-
-		i++;
-	}
-	sw_stats->num_active_rx = i;
-}
-
-static void
-bna_fw_cb_stats_get(void *arg, int status)
-{
-	struct bna *bna = (struct bna *)arg;
-	u64 *p_stats;
-	int i, count;
-	int rxf_count, txf_count;
-	u64 rxf_bmap, txf_bmap;
-
-	bfa_q_qe_init(&bna->mbox_qe.qe);
-
-	if (status == 0) {
-		p_stats = (u64 *)bna->stats.hw_stats;
-		count = sizeof(struct bfi_ll_stats) / sizeof(u64);
-		for (i = 0; i < count; i++)
-			p_stats[i] = cpu_to_be64(p_stats[i]);
-
-		rxf_count = 0;
-		rxf_bmap = (u64)bna->stats.rxf_bmap[0] |
-			((u64)bna->stats.rxf_bmap[1] << 32);
-		for (i = 0; i < BFI_LL_RXF_ID_MAX; i++)
-			if (rxf_bmap & ((u64)1 << i))
-				rxf_count++;
-
-		txf_count = 0;
-		txf_bmap = (u64)bna->stats.txf_bmap[0] |
-			((u64)bna->stats.txf_bmap[1] << 32);
-		for (i = 0; i < BFI_LL_TXF_ID_MAX; i++)
-			if (txf_bmap & ((u64)1 << i))
-				txf_count++;
-
-		p_stats = (u64 *)&bna->stats.hw_stats->rxf_stats[0] +
-				((rxf_count * sizeof(struct bfi_ll_stats_rxf) +
-				txf_count * sizeof(struct bfi_ll_stats_txf))/
-				sizeof(u64));
-
-		/* Populate the TXF stats from the firmware DMAed copy */
-		for (i = (BFI_LL_TXF_ID_MAX - 1); i >= 0; i--)
-			if (txf_bmap & ((u64)1 << i)) {
-				p_stats -= sizeof(struct bfi_ll_stats_txf)/
-						sizeof(u64);
-				memcpy(&bna->stats.hw_stats->txf_stats[i],
-					p_stats,
-					sizeof(struct bfi_ll_stats_txf));
-			}
-
-		/* Populate the RXF stats from the firmware DMAed copy */
-		for (i = (BFI_LL_RXF_ID_MAX - 1); i >= 0; i--)
-			if (rxf_bmap & ((u64)1 << i)) {
-				p_stats -= sizeof(struct bfi_ll_stats_rxf)/
-						sizeof(u64);
-				memcpy(&bna->stats.hw_stats->rxf_stats[i],
-					p_stats,
-					sizeof(struct bfi_ll_stats_rxf));
-			}
-
-		bna_sw_stats_get(bna, bna->stats.sw_stats);
-		bnad_cb_stats_get(bna->bnad, BNA_CB_SUCCESS, &bna->stats);
-	} else
-		bnad_cb_stats_get(bna->bnad, BNA_CB_FAIL, &bna->stats);
-}
-
-static void
-bna_fw_stats_get(struct bna *bna)
-{
-	struct bfi_ll_stats_req ll_req;
-
-	bfi_h2i_set(ll_req.mh, BFI_MC_LL, BFI_LL_H2I_STATS_GET_REQ, 0);
-	ll_req.stats_mask = htons(BFI_LL_STATS_ALL);
-
-	ll_req.rxf_id_mask[0] = htonl(bna->rx_mod.rxf_bmap[0]);
-	ll_req.rxf_id_mask[1] =	htonl(bna->rx_mod.rxf_bmap[1]);
-	ll_req.txf_id_mask[0] =	htonl(bna->tx_mod.txf_bmap[0]);
-	ll_req.txf_id_mask[1] =	htonl(bna->tx_mod.txf_bmap[1]);
-
-	ll_req.host_buffer.a32.addr_hi = bna->hw_stats_dma.msb;
-	ll_req.host_buffer.a32.addr_lo = bna->hw_stats_dma.lsb;
-
-	bna_mbox_qe_fill(&bna->mbox_qe, &ll_req, sizeof(ll_req),
-				bna_fw_cb_stats_get, bna);
-	bna_mbox_send(bna, &bna->mbox_qe);
-
-	bna->stats.rxf_bmap[0] = bna->rx_mod.rxf_bmap[0];
-	bna->stats.rxf_bmap[1] = bna->rx_mod.rxf_bmap[1];
-	bna->stats.txf_bmap[0] = bna->tx_mod.txf_bmap[0];
-	bna->stats.txf_bmap[1] = bna->tx_mod.txf_bmap[1];
-}
-
-void
-bna_stats_get(struct bna *bna)
-{
-	if (bna_device_status_get(&bna->device))
-		bna_fw_stats_get(bna);
-	else
-		bnad_cb_stats_get(bna->bnad, BNA_CB_FAIL, &bna->stats);
-}
-
-/* IB */
-static void
-bna_ib_coalescing_timeo_set(struct bna_ib *ib, u8 coalescing_timeo)
-{
-	ib->ib_config.coalescing_timeo = coalescing_timeo;
-
-	if (ib->start_count)
-		ib->door_bell.doorbell_ack = BNA_DOORBELL_IB_INT_ACK(
-				(u32)ib->ib_config.coalescing_timeo, 0);
-}
-
-/* RxF */
-void
-bna_rxf_adv_init(struct bna_rxf *rxf,
-		struct bna_rx *rx,
-		struct bna_rx_config *q_config)
-{
-	switch (q_config->rxp_type) {
-	case BNA_RXP_SINGLE:
-		/* No-op */
-		break;
-	case BNA_RXP_SLR:
-		rxf->ctrl_flags |= BNA_RXF_CF_SM_LG_RXQ;
-		break;
-	case BNA_RXP_HDS:
-		rxf->hds_cfg.hdr_type = q_config->hds_config.hdr_type;
-		rxf->hds_cfg.header_size =
-				q_config->hds_config.header_size;
-		rxf->forced_offset = 0;
-		break;
-	default:
-		break;
-	}
-
-	if (q_config->rss_status == BNA_STATUS_T_ENABLED) {
-		rxf->ctrl_flags |= BNA_RXF_CF_RSS_ENABLE;
-		rxf->rss_cfg.hash_type = q_config->rss_config.hash_type;
-		rxf->rss_cfg.hash_mask = q_config->rss_config.hash_mask;
-		memcpy(&rxf->rss_cfg.toeplitz_hash_key[0],
-			&q_config->rss_config.toeplitz_hash_key[0],
-			sizeof(rxf->rss_cfg.toeplitz_hash_key));
-	}
-}
-
-static void
-rxf_fltr_mbox_cmd(struct bna_rxf *rxf, u8 cmd, enum bna_status status)
-{
-	struct bfi_ll_rxf_req req;
-
-	bfi_h2i_set(req.mh, BFI_MC_LL, cmd, 0);
-
-	req.rxf_id = rxf->rxf_id;
-	req.enable = status;
-
-	bna_mbox_qe_fill(&rxf->mbox_qe, &req, sizeof(req),
-			rxf_cb_cam_fltr_mbox_cmd, rxf);
-
-	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
-}
-
-int
-rxf_process_packet_filter_ucast(struct bna_rxf *rxf)
-{
-	struct bna_mac *mac = NULL;
-	struct list_head *qe;
-
-	/* Add additional MAC entries */
-	if (!list_empty(&rxf->ucast_pending_add_q)) {
-		bfa_q_deq(&rxf->ucast_pending_add_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_ADD_REQ, mac);
-		list_add_tail(&mac->qe, &rxf->ucast_active_q);
-		return 1;
-	}
-
-	/* Delete MAC addresses previousely added */
-	if (!list_empty(&rxf->ucast_pending_del_q)) {
-		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_DEL_REQ, mac);
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_process_packet_filter_promisc(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* Enable/disable promiscuous mode */
-	if (is_promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move promisc configuration from pending -> active */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active |= BNA_RXMODE_PROMISC;
-
-		/* Disable VLAN filter to allow all VLANs */
-		__rxf_vlan_filter_set(rxf, BNA_STATUS_T_DISABLED);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_ENABLED);
-		return 1;
-	} else if (is_promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move promisc configuration from pending -> active */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_process_packet_filter_allmulti(struct bna_rxf *rxf)
-{
-	/* Enable/disable allmulti mode */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move allmulti configuration from pending -> active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active |= BNA_RXMODE_ALLMULTI;
-
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_ENABLED);
-		return 1;
-	} else if (is_allmulti_disable(rxf->rxmode_pending,
-					rxf->rxmode_pending_bitmask)) {
-		/* move allmulti configuration from pending -> active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_clear_packet_filter_ucast(struct bna_rxf *rxf)
-{
-	struct bna_mac *mac = NULL;
-	struct list_head *qe;
-
-	/* 1. delete pending ucast entries */
-	if (!list_empty(&rxf->ucast_pending_del_q)) {
-		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_DEL_REQ, mac);
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-		return 1;
-	}
-
-	/* 2. clear active ucast entries; move them to pending_add_q */
-	if (!list_empty(&rxf->ucast_active_q)) {
-		bfa_q_deq(&rxf->ucast_active_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		rxf_cam_mbox_cmd(rxf, BFI_LL_H2I_MAC_UCAST_DEL_REQ, mac);
-		list_add_tail(&mac->qe, &rxf->ucast_pending_add_q);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_clear_packet_filter_promisc(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* 6. Execute pending promisc mode disable command */
-	if (is_promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move promisc configuration from pending -> active */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	/* 7. Clear active promisc mode; move it to pending enable */
-	if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
-		/* move promisc configuration from active -> pending */
-		promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_PROMISCUOUS_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
-rxf_clear_packet_filter_allmulti(struct bna_rxf *rxf)
-{
-	/* 10. Execute pending allmulti mode disable command */
-	if (is_allmulti_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move allmulti configuration from pending -> active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	/* 11. Clear active allmulti mode; move it to pending enable */
-	if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
-		/* move allmulti configuration from active -> pending */
-		allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_MAC_MCAST_FILTER_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-void
-rxf_reset_packet_filter_ucast(struct bna_rxf *rxf)
-{
-	struct list_head *qe;
-	struct bna_mac *mac;
-
-	/* 1. Move active ucast entries to pending_add_q */
-	while (!list_empty(&rxf->ucast_active_q)) {
-		bfa_q_deq(&rxf->ucast_active_q, &qe);
-		bfa_q_qe_init(qe);
-		list_add_tail(qe, &rxf->ucast_pending_add_q);
-	}
-
-	/* 2. Throw away delete pending ucast entries */
-	while (!list_empty(&rxf->ucast_pending_del_q)) {
-		bfa_q_deq(&rxf->ucast_pending_del_q, &qe);
-		bfa_q_qe_init(qe);
-		mac = (struct bna_mac *)qe;
-		bna_ucam_mod_mac_put(&rxf->rx->bna->ucam_mod, mac);
-	}
-}
-
-void
-rxf_reset_packet_filter_promisc(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* 6. Clear pending promisc mode disable */
-	if (is_promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-	}
-
-	/* 7. Move promisc mode config from active -> pending */
-	if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
-		promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_PROMISC;
-	}
-
-}
-
-void
-rxf_reset_packet_filter_allmulti(struct bna_rxf *rxf)
-{
-	/* 10. Clear pending allmulti mode disable */
-	if (is_allmulti_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-	}
-
-	/* 11. Move allmulti mode config from active -> pending */
-	if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
-		allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_ALLMULTI;
-	}
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_promisc_enable(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	int ret = 0;
-
-	/* There can not be any pending disable command */
-
-	/* Do nothing if pending enable or already enabled */
-	if (is_promisc_enable(rxf->rxmode_pending,
-			rxf->rxmode_pending_bitmask) ||
-			(rxf->rxmode_active & BNA_RXMODE_PROMISC)) {
-		/* Schedule enable */
-	} else {
-		/* Promisc mode should not be active in the system */
-		promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		bna->rxf_promisc_id = rxf->rxf_id;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_promisc_disable(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	int ret = 0;
-
-	/* There can not be any pending disable */
-
-	/* Turn off pending enable command , if any */
-	if (is_promisc_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* Promisc mode should not be active */
-		/* system promisc state should be pending */
-		promisc_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		/* Remove the promisc state from the system */
-		bna->rxf_promisc_id = BFI_MAX_RXF;
-
-		/* Schedule disable */
-	} else if (rxf->rxmode_active & BNA_RXMODE_PROMISC) {
-		/* Promisc mode should be active in the system */
-		promisc_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-
-	/* Do nothing if already disabled */
-	} else {
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_allmulti_enable(struct bna_rxf *rxf)
-{
-	int ret = 0;
-
-	/* There can not be any pending disable command */
-
-	/* Do nothing if pending enable or already enabled */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-			rxf->rxmode_pending_bitmask) ||
-			(rxf->rxmode_active & BNA_RXMODE_ALLMULTI)) {
-		/* Schedule enable */
-	} else {
-		allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_allmulti_disable(struct bna_rxf *rxf)
-{
-	int ret = 0;
-
-	/* There can not be any pending disable */
-
-	/* Turn off pending enable command , if any */
-	if (is_allmulti_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* Allmulti mode should not be active */
-		allmulti_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-
-	/* Schedule disable */
-	} else if (rxf->rxmode_active & BNA_RXMODE_ALLMULTI) {
-		allmulti_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/* RxF <- bnad */
-enum bna_cb_status
-bna_rx_mode_set(struct bna_rx *rx, enum bna_rxmode new_mode,
-		enum bna_rxmode bitmask,
-		void (*cbfn)(struct bnad *, struct bna_rx *,
-			     enum bna_cb_status))
-{
-	struct bna_rxf *rxf = &rx->rxf;
-	int need_hw_config = 0;
-
-	/* Process the commands */
-
-	if (is_promisc_enable(new_mode, bitmask)) {
-		/* If promisc mode is already enabled elsewhere in the system */
-		if ((rx->bna->rxf_promisc_id != BFI_MAX_RXF) &&
-			(rx->bna->rxf_promisc_id != rxf->rxf_id))
-			goto err_return;
-		if (rxf_promisc_enable(rxf))
-			need_hw_config = 1;
-	} else if (is_promisc_disable(new_mode, bitmask)) {
-		if (rxf_promisc_disable(rxf))
-			need_hw_config = 1;
-	}
-
-	if (is_allmulti_enable(new_mode, bitmask)) {
-		if (rxf_allmulti_enable(rxf))
-			need_hw_config = 1;
-	} else if (is_allmulti_disable(new_mode, bitmask)) {
-		if (rxf_allmulti_disable(rxf))
-			need_hw_config = 1;
-	}
-
-	/* Trigger h/w if needed */
-
-	if (need_hw_config) {
-		rxf->cam_fltr_cbfn = cbfn;
-		rxf->cam_fltr_cbarg = rx->bna->bnad;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	} else if (cbfn)
-		(*cbfn)(rx->bna->bnad, rx, BNA_CB_SUCCESS);
-
-	return BNA_CB_SUCCESS;
-
-err_return:
-	return BNA_CB_FAIL;
-}
-
-void
-/* RxF <- bnad */
-bna_rx_vlanfilter_enable(struct bna_rx *rx)
-{
-	struct bna_rxf *rxf = &rx->rxf;
-
-	if (rxf->vlan_filter_status == BNA_STATUS_T_DISABLED) {
-		rxf->rxf_flags |= BNA_RXF_FL_VLAN_CONFIG_PENDING;
-		rxf->vlan_filter_status = BNA_STATUS_T_ENABLED;
-		bfa_fsm_send_event(rxf, RXF_E_CAM_FLTR_MOD);
-	}
-}
-
-/* Rx */
-
-/* Rx <- bnad */
-void
-bna_rx_coalescing_timeo_set(struct bna_rx *rx, int coalescing_timeo)
-{
-	struct bna_rxp *rxp;
-	struct list_head *qe;
-
-	list_for_each(qe, &rx->rxp_q) {
-		rxp = (struct bna_rxp *)qe;
-		rxp->cq.ccb->rx_coalescing_timeo = coalescing_timeo;
-		bna_ib_coalescing_timeo_set(rxp->cq.ib, coalescing_timeo);
-	}
-}
-
-/* Rx <- bnad */
-void
-bna_rx_dim_reconfig(struct bna *bna, const u32 vector[][BNA_BIAS_T_MAX])
-{
-	int i, j;
-
-	for (i = 0; i < BNA_LOAD_T_MAX; i++)
-		for (j = 0; j < BNA_BIAS_T_MAX; j++)
-			bna->rx_mod.dim_vector[i][j] = vector[i][j];
-}
-
-/* Rx <- bnad */
-void
-bna_rx_dim_update(struct bna_ccb *ccb)
-{
-	struct bna *bna = ccb->cq->rx->bna;
-	u32 load, bias;
-	u32 pkt_rt, small_rt, large_rt;
-	u8 coalescing_timeo;
-
-	if ((ccb->pkt_rate.small_pkt_cnt == 0) &&
-		(ccb->pkt_rate.large_pkt_cnt == 0))
-		return;
-
-	/* Arrive at preconfigured coalescing timeo value based on pkt rate */
-
-	small_rt = ccb->pkt_rate.small_pkt_cnt;
-	large_rt = ccb->pkt_rate.large_pkt_cnt;
-
-	pkt_rt = small_rt + large_rt;
-
-	if (pkt_rt < BNA_PKT_RATE_10K)
-		load = BNA_LOAD_T_LOW_4;
-	else if (pkt_rt < BNA_PKT_RATE_20K)
-		load = BNA_LOAD_T_LOW_3;
-	else if (pkt_rt < BNA_PKT_RATE_30K)
-		load = BNA_LOAD_T_LOW_2;
-	else if (pkt_rt < BNA_PKT_RATE_40K)
-		load = BNA_LOAD_T_LOW_1;
-	else if (pkt_rt < BNA_PKT_RATE_50K)
-		load = BNA_LOAD_T_HIGH_1;
-	else if (pkt_rt < BNA_PKT_RATE_60K)
-		load = BNA_LOAD_T_HIGH_2;
-	else if (pkt_rt < BNA_PKT_RATE_80K)
-		load = BNA_LOAD_T_HIGH_3;
-	else
-		load = BNA_LOAD_T_HIGH_4;
-
-	if (small_rt > (large_rt << 1))
-		bias = 0;
-	else
-		bias = 1;
-
-	ccb->pkt_rate.small_pkt_cnt = 0;
-	ccb->pkt_rate.large_pkt_cnt = 0;
-
-	coalescing_timeo = bna->rx_mod.dim_vector[load][bias];
-	ccb->rx_coalescing_timeo = coalescing_timeo;
-
-	/* Set it to IB */
-	bna_ib_coalescing_timeo_set(ccb->cq->ib, coalescing_timeo);
-}
-
-/* Tx */
-/* TX <- bnad */
-void
-bna_tx_coalescing_timeo_set(struct bna_tx *tx, int coalescing_timeo)
-{
-	struct bna_txq *txq;
-	struct list_head *qe;
-
-	list_for_each(qe, &tx->txq_q) {
-		txq = (struct bna_txq *)qe;
-		bna_ib_coalescing_timeo_set(txq->ib, coalescing_timeo);
-	}
-}
-
-/*
- * Private data
- */
-
-struct bna_ritseg_pool_cfg {
-	u32	pool_size;
-	u32	pool_entry_size;
-};
-init_ritseg_pool(ritseg_pool_cfg);
-
-/*
- * Private functions
- */
-static void
-bna_ucam_mod_init(struct bna_ucam_mod *ucam_mod, struct bna *bna,
-		  struct bna_res_info *res_info)
-{
-	int i;
-
-	ucam_mod->ucmac = (struct bna_mac *)
-		res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	INIT_LIST_HEAD(&ucam_mod->free_q);
-	for (i = 0; i < BFI_MAX_UCMAC; i++) {
-		bfa_q_qe_init(&ucam_mod->ucmac[i].qe);
-		list_add_tail(&ucam_mod->ucmac[i].qe, &ucam_mod->free_q);
-	}
-
-	ucam_mod->bna = bna;
-}
-
-static void
-bna_ucam_mod_uninit(struct bna_ucam_mod *ucam_mod)
-{
-	struct list_head *qe;
-	int i = 0;
-
-	list_for_each(qe, &ucam_mod->free_q)
-		i++;
-
-	ucam_mod->bna = NULL;
-}
-
-static void
-bna_mcam_mod_init(struct bna_mcam_mod *mcam_mod, struct bna *bna,
-		  struct bna_res_info *res_info)
-{
-	int i;
-
-	mcam_mod->mcmac = (struct bna_mac *)
-		res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.mdl[0].kva;
-
-	INIT_LIST_HEAD(&mcam_mod->free_q);
-	for (i = 0; i < BFI_MAX_MCMAC; i++) {
-		bfa_q_qe_init(&mcam_mod->mcmac[i].qe);
-		list_add_tail(&mcam_mod->mcmac[i].qe, &mcam_mod->free_q);
-	}
-
-	mcam_mod->bna = bna;
-}
-
-static void
-bna_mcam_mod_uninit(struct bna_mcam_mod *mcam_mod)
-{
-	struct list_head *qe;
-	int i = 0;
-
-	list_for_each(qe, &mcam_mod->free_q)
-		i++;
-
-	mcam_mod->bna = NULL;
-}
-
-static void
-bna_rit_mod_init(struct bna_rit_mod *rit_mod,
-		struct bna_res_info *res_info)
-{
-	int i;
-	int j;
-	int count;
-	int offset;
-
-	rit_mod->rit = (struct bna_rit_entry *)
-		res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.mdl[0].kva;
-	rit_mod->rit_segment = (struct bna_rit_segment *)
-		res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.mdl[0].kva;
-
-	count = 0;
-	offset = 0;
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		INIT_LIST_HEAD(&rit_mod->rit_seg_pool[i]);
-		for (j = 0; j < ritseg_pool_cfg[i].pool_size; j++) {
-			bfa_q_qe_init(&rit_mod->rit_segment[count].qe);
-			rit_mod->rit_segment[count].max_rit_size =
-					ritseg_pool_cfg[i].pool_entry_size;
-			rit_mod->rit_segment[count].rit_offset = offset;
-			rit_mod->rit_segment[count].rit =
-					&rit_mod->rit[offset];
-			list_add_tail(&rit_mod->rit_segment[count].qe,
-				&rit_mod->rit_seg_pool[i]);
-			count++;
-			offset += ritseg_pool_cfg[i].pool_entry_size;
-		}
-	}
-}
-
-/*
- * Public functions
- */
-
-/* Called during probe(), before calling bna_init() */
-void
-bna_res_req(struct bna_res_info *res_info)
-{
-	bna_adv_res_req(res_info);
-
-	/* DMA memory for retrieving IOC attributes */
-	res_info[BNA_RES_MEM_T_ATTR].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.len =
-				ALIGN(bfa_nw_ioc_meminfo(), PAGE_SIZE);
-
-	/* DMA memory for index segment of an IB */
-	res_info[BNA_RES_MEM_T_IBIDX].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.mem_type = BNA_MEM_T_DMA;
-	res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.len =
-				BFI_IBIDX_SIZE * BFI_IBIDX_MAX_SEGSIZE;
-	res_info[BNA_RES_MEM_T_IBIDX].res_u.mem_info.num = BFI_MAX_IB;
-
-	/* Virtual memory for IB objects - stored by IB module */
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_IB_ARRAY].res_u.mem_info.len =
-				BFI_MAX_IB * sizeof(struct bna_ib);
-
-	/* Virtual memory for intr objects - stored by IB module */
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_INTR_ARRAY].res_u.mem_info.len =
-				BFI_MAX_IB * sizeof(struct bna_intr);
-
-	/* Virtual memory for idx_seg objects - stored by IB module */
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_IDXSEG_ARRAY].res_u.mem_info.len =
-			BFI_IBIDX_TOTAL_SEGS * sizeof(struct bna_ibidx_seg);
-
-	/* Virtual memory for Tx objects - stored by Tx module */
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_TX_ARRAY].res_u.mem_info.len =
-			BFI_MAX_TXQ * sizeof(struct bna_tx);
-
-	/* Virtual memory for TxQ - stored by Tx module */
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_TXQ_ARRAY].res_u.mem_info.len =
-			BFI_MAX_TXQ * sizeof(struct bna_txq);
-
-	/* Virtual memory for Rx objects - stored by Rx module */
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RX_ARRAY].res_u.mem_info.len =
-			BFI_MAX_RXQ * sizeof(struct bna_rx);
-
-	/* Virtual memory for RxPath - stored by Rx module */
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RXP_ARRAY].res_u.mem_info.len =
-			BFI_MAX_RXQ * sizeof(struct bna_rxp);
-
-	/* Virtual memory for RxQ - stored by Rx module */
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RXQ_ARRAY].res_u.mem_info.len =
-			BFI_MAX_RXQ * sizeof(struct bna_rxq);
-
-	/* Virtual memory for Unicast MAC address - stored by ucam module */
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_UCMAC_ARRAY].res_u.mem_info.len =
-			BFI_MAX_UCMAC * sizeof(struct bna_mac);
-
-	/* Virtual memory for Multicast MAC address - stored by mcam module */
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_MCMAC_ARRAY].res_u.mem_info.len =
-			BFI_MAX_MCMAC * sizeof(struct bna_mac);
-
-	/* Virtual memory for RIT entries */
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RIT_ENTRY].res_u.mem_info.len =
-			BFI_MAX_RIT_SIZE * sizeof(struct bna_rit_entry);
-
-	/* Virtual memory for RIT segment table */
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_type = BNA_RES_T_MEM;
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.mem_type =
-								BNA_MEM_T_KVA;
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.num = 1;
-	res_info[BNA_RES_MEM_T_RIT_SEGMENT].res_u.mem_info.len =
-			BFI_RIT_TOTAL_SEGS * sizeof(struct bna_rit_segment);
-
-	/* Interrupt resource for mailbox interrupt */
-	res_info[BNA_RES_INTR_T_MBOX].res_type = BNA_RES_T_INTR;
-	res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.intr_type =
-							BNA_INTR_T_MSIX;
-	res_info[BNA_RES_INTR_T_MBOX].res_u.intr_info.num = 1;
-}
-
-/* Called during probe() */
-void
-bna_init(struct bna *bna, struct bnad *bnad, struct bfa_pcidev *pcidev,
-		struct bna_res_info *res_info)
-{
-	bna->bnad = bnad;
-	bna->pcidev = *pcidev;
-
-	bna->stats.hw_stats = (struct bfi_ll_stats *)
-		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].kva;
-	bna->hw_stats_dma.msb =
-		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].dma.msb;
-	bna->hw_stats_dma.lsb =
-		res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mdl[0].dma.lsb;
-	bna->stats.sw_stats = (struct bna_sw_stats *)
-		res_info[BNA_RES_MEM_T_SWSTATS].res_u.mem_info.mdl[0].kva;
-
-	bna->regs.page_addr = bna->pcidev.pci_bar_kva +
-				reg_offset[bna->pcidev.pci_func].page_addr;
-	bna->regs.fn_int_status = bna->pcidev.pci_bar_kva +
-				reg_offset[bna->pcidev.pci_func].fn_int_status;
-	bna->regs.fn_int_mask = bna->pcidev.pci_bar_kva +
-				reg_offset[bna->pcidev.pci_func].fn_int_mask;
-
-	if (bna->pcidev.pci_func < 3)
-		bna->port_num = 0;
-	else
-		bna->port_num = 1;
-
-	/* Also initializes diag, cee, sfp, phy_port and mbox_mod */
-	bna_device_init(&bna->device, bna, res_info);
-
-	bna_port_init(&bna->port, bna);
-
-	bna_tx_mod_init(&bna->tx_mod, bna, res_info);
-
-	bna_rx_mod_init(&bna->rx_mod, bna, res_info);
-
-	bna_ib_mod_init(&bna->ib_mod, bna, res_info);
-
-	bna_rit_mod_init(&bna->rit_mod, res_info);
-
-	bna_ucam_mod_init(&bna->ucam_mod, bna, res_info);
-
-	bna_mcam_mod_init(&bna->mcam_mod, bna, res_info);
-
-	bna->rxf_promisc_id = BFI_MAX_RXF;
-
-	/* Mbox q element for posting stat request to f/w */
-	bfa_q_qe_init(&bna->mbox_qe.qe);
-}
-
-void
-bna_uninit(struct bna *bna)
-{
-	bna_mcam_mod_uninit(&bna->mcam_mod);
-
-	bna_ucam_mod_uninit(&bna->ucam_mod);
-
-	bna_ib_mod_uninit(&bna->ib_mod);
-
-	bna_rx_mod_uninit(&bna->rx_mod);
-
-	bna_tx_mod_uninit(&bna->tx_mod);
-
-	bna_port_uninit(&bna->port);
-
-	bna_device_uninit(&bna->device);
-
-	bna->bnad = NULL;
-}
-
-struct bna_mac *
-bna_ucam_mod_mac_get(struct bna_ucam_mod *ucam_mod)
-{
-	struct list_head *qe;
-
-	if (list_empty(&ucam_mod->free_q))
-		return NULL;
-
-	bfa_q_deq(&ucam_mod->free_q, &qe);
-
-	return (struct bna_mac *)qe;
-}
-
-void
-bna_ucam_mod_mac_put(struct bna_ucam_mod *ucam_mod, struct bna_mac *mac)
-{
-	list_add_tail(&mac->qe, &ucam_mod->free_q);
-}
-
-struct bna_mac *
-bna_mcam_mod_mac_get(struct bna_mcam_mod *mcam_mod)
-{
-	struct list_head *qe;
-
-	if (list_empty(&mcam_mod->free_q))
-		return NULL;
-
-	bfa_q_deq(&mcam_mod->free_q, &qe);
-
-	return (struct bna_mac *)qe;
-}
-
-void
-bna_mcam_mod_mac_put(struct bna_mcam_mod *mcam_mod, struct bna_mac *mac)
-{
-	list_add_tail(&mac->qe, &mcam_mod->free_q);
-}
-
-/**
- * Note: This should be called in the same locking context as the call to
- * bna_rit_mod_seg_get()
- */
-int
-bna_rit_mod_can_satisfy(struct bna_rit_mod *rit_mod, int seg_size)
-{
-	int i;
-
-	/* Select the pool for seg_size */
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		if (seg_size <= ritseg_pool_cfg[i].pool_entry_size)
-			break;
-	}
-
-	if (i == BFI_RIT_SEG_TOTAL_POOLS)
-		return 0;
-
-	if (list_empty(&rit_mod->rit_seg_pool[i]))
-		return 0;
-
-	return 1;
-}
-
-struct bna_rit_segment *
-bna_rit_mod_seg_get(struct bna_rit_mod *rit_mod, int seg_size)
-{
-	struct bna_rit_segment *seg;
-	struct list_head *qe;
-	int i;
-
-	/* Select the pool for seg_size */
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		if (seg_size <= ritseg_pool_cfg[i].pool_entry_size)
-			break;
-	}
-
-	if (i == BFI_RIT_SEG_TOTAL_POOLS)
-		return NULL;
-
-	if (list_empty(&rit_mod->rit_seg_pool[i]))
-		return NULL;
-
-	bfa_q_deq(&rit_mod->rit_seg_pool[i], &qe);
-	seg = (struct bna_rit_segment *)qe;
-	bfa_q_qe_init(&seg->qe);
-	seg->rit_size = seg_size;
-
-	return seg;
-}
-
-void
-bna_rit_mod_seg_put(struct bna_rit_mod *rit_mod,
-			struct bna_rit_segment *seg)
-{
-	int i;
-
-	/* Select the pool for seg->max_rit_size */
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		if (seg->max_rit_size == ritseg_pool_cfg[i].pool_entry_size)
-			break;
-	}
-
-	seg->rit_size = 0;
-	list_add_tail(&seg->qe, &rit_mod->rit_seg_pool[i]);
-}