tty: replace ->proc_fops with ->proc_show

Just set up the show callback in the tty_operations, and use
proc_create_single_data to create the file without additional
boilerplace code.

Signed-off-by: Christoph Hellwig <hch@lst.de>

arch/ia64/hp/sim/simserial.c

@@ -435,19 +435,6 @@ static int rs_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int rs_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rs_proc_show, NULL);
-}
-
-static const struct file_operations rs_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= rs_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static const struct tty_operations hp_ops = {
 	.open = rs_open,
 	.close = rs_close,
@@ -462,7 +449,7 @@ static const struct tty_operations hp_ops = {
 	.unthrottle = rs_unthrottle,
 	.send_xchar = rs_send_xchar,
 	.hangup = rs_hangup,
-	.proc_fops = &rs_proc_fops,
+	.proc_show = rs_proc_show,
 };
 
 static const struct tty_port_operations hp_port_ops = {

arch/xtensa/platforms/iss/console.c

@@ -153,19 +153,6 @@ static int rs_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int rs_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rs_proc_show, NULL);
-}
-
-static const struct file_operations rs_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= rs_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static const struct tty_operations serial_ops = {
 	.open = rs_open,
 	.close = rs_close,
@@ -176,7 +163,7 @@ static const struct tty_operations serial_ops = {
 	.chars_in_buffer = rs_chars_in_buffer,
 	.hangup = rs_hangup,
 	.wait_until_sent = rs_wait_until_sent,
-	.proc_fops = &rs_proc_fops,
+	.proc_show = rs_proc_show,
 };
 
 int __init rs_init(void)

drivers/char/pcmcia/synclink_cs.c

@@ -2616,19 +2616,6 @@ static int mgslpc_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int mgslpc_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mgslpc_proc_show, NULL);
-}
-
-static const struct file_operations mgslpc_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= mgslpc_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static int rx_alloc_buffers(MGSLPC_INFO *info)
 {
 	/* each buffer has header and data */
@@ -2815,7 +2802,7 @@ static const struct tty_operations mgslpc_ops = {
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
 	.get_icount = mgslpc_get_icount,
-	.proc_fops = &mgslpc_proc_fops,
+	.proc_show = mgslpc_proc_show,
 };
 
 static int __init synclink_cs_init(void)

drivers/mmc/core/sdio_uart.c

@@ -1008,19 +1008,6 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int sdio_uart_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, sdio_uart_proc_show, NULL);
-}
-
-static const struct file_operations sdio_uart_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= sdio_uart_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static const struct tty_port_operations sdio_uart_port_ops = {
 	.dtr_rts = uart_dtr_rts,
 	.carrier_raised = uart_carrier_raised,
@@ -1045,7 +1032,7 @@ static const struct tty_operations sdio_uart_ops = {
 	.tiocmset		= sdio_uart_tiocmset,
 	.install		= sdio_uart_install,
 	.cleanup		= sdio_uart_cleanup,
-	.proc_fops		= &sdio_uart_proc_fops,
+	.proc_show		= sdio_uart_proc_show,
 };
 
 static struct tty_driver *sdio_uart_tty_driver;

drivers/staging/fwserial/fwserial.c

@@ -1506,11 +1506,6 @@ static int fwtty_debugfs_peers_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int fwtty_proc_open(struct inode *inode, struct file *fp)
-{
-	return single_open(fp, fwtty_proc_show, NULL);
-}
-
 static int fwtty_stats_open(struct inode *inode, struct file *fp)
 {
 	return single_open(fp, fwtty_debugfs_stats_show, inode->i_private);
@@ -1537,14 +1532,6 @@ static const struct file_operations fwtty_peers_fops = {
 	.release =	single_release,
 };
 
-static const struct file_operations fwtty_proc_fops = {
-	.owner =        THIS_MODULE,
-	.open =         fwtty_proc_open,
-	.read =         seq_read,
-	.llseek =       seq_lseek,
-	.release =      single_release,
-};
-
 static const struct tty_port_operations fwtty_port_ops = {
 	.dtr_rts =		fwtty_port_dtr_rts,
 	.carrier_raised =	fwtty_port_carrier_raised,
@@ -1570,7 +1557,7 @@ static const struct tty_operations fwtty_ops = {
 	.tiocmget =		fwtty_tiocmget,
 	.tiocmset =		fwtty_tiocmset,
 	.get_icount =		fwtty_get_icount,
-	.proc_fops =		&fwtty_proc_fops,
+	.proc_show =		fwtty_proc_show,
 };
 
 static const struct tty_operations fwloop_ops = {

drivers/tty/amiserial.c

@@ -1566,19 +1566,6 @@ static int rs_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int rs_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rs_proc_show, NULL);
-}
-
-static const struct file_operations rs_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= rs_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 /*
  * ---------------------------------------------------------------------
  * rs_init() and friends
@@ -1620,7 +1607,7 @@ static const struct tty_operations serial_ops = {
 	.tiocmget = rs_tiocmget,
 	.tiocmset = rs_tiocmset,
 	.get_icount = rs_get_icount,
-	.proc_fops = &rs_proc_fops,
+	.proc_show = rs_proc_show,
 };
 
 static int amiga_carrier_raised(struct tty_port *port)

drivers/tty/cyclades.c

@@ -3972,19 +3972,6 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int cyclades_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cyclades_proc_show, NULL);
-}
-
-static const struct file_operations cyclades_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cyclades_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 /* The serial driver boot-time initialization code!
     Hardware I/O ports are mapped to character special devices on a
     first found, first allocated manner.  That is, this code searches
@@ -4024,7 +4011,7 @@ static const struct tty_operations cy_ops = {
 	.tiocmget = cy_tiocmget,
 	.tiocmset = cy_tiocmset,
 	.get_icount = cy_get_icount,
-	.proc_fops = &cyclades_proc_fops,
+	.proc_show = cyclades_proc_show,
 };
 
 static int __init cy_init(void)

drivers/tty/serial/serial_core.c

@@ -1829,19 +1829,6 @@ static int uart_proc_show(struct seq_file *m, void *v)
 		uart_line_info(m, drv, i);
 	return 0;
 }
-
-static int uart_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, uart_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations uart_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= uart_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
 #endif
 
 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2415,7 +2402,7 @@ static const struct tty_operations uart_ops = {
 	.break_ctl	= uart_break_ctl,
 	.wait_until_sent= uart_wait_until_sent,
 #ifdef CONFIG_PROC_FS
-	.proc_fops	= &uart_proc_fops,
+	.proc_show	= uart_proc_show,
 #endif
 	.tiocmget	= uart_tiocmget,
 	.tiocmset	= uart_tiocmset,

drivers/tty/synclink.c

@@ -3534,19 +3534,6 @@ static int mgsl_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int mgsl_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mgsl_proc_show, NULL);
-}
-
-static const struct file_operations mgsl_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= mgsl_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 /* mgsl_allocate_dma_buffers()
  * 
  * 	Allocate and format DMA buffers (ISA adapter)
@@ -4298,7 +4285,7 @@ static const struct tty_operations mgsl_ops = {
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
 	.get_icount = msgl_get_icount,
-	.proc_fops = &mgsl_proc_fops,
+	.proc_show = mgsl_proc_show,
 };
 
 /*

drivers/tty/synclink_gt.c

@@ -1316,19 +1316,6 @@ static int synclink_gt_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int synclink_gt_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, synclink_gt_proc_show, NULL);
-}
-
-static const struct file_operations synclink_gt_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= synclink_gt_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 /*
  * return count of bytes in transmit buffer
  */
@@ -3721,7 +3708,7 @@ static const struct tty_operations ops = {
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
 	.get_icount = get_icount,
-	.proc_fops = &synclink_gt_proc_fops,
+	.proc_show = synclink_gt_proc_show,
 };
 
 static void slgt_cleanup(void)

drivers/tty/synclinkmp.c

@@ -1421,19 +1421,6 @@ static int synclinkmp_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int synclinkmp_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, synclinkmp_proc_show, NULL);
-}
-
-static const struct file_operations synclinkmp_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= synclinkmp_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 /* Return the count of bytes in transmit buffer
  */
 static int chars_in_buffer(struct tty_struct *tty)
@@ -3899,7 +3886,7 @@ static const struct tty_operations ops = {
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
 	.get_icount = get_icount,
-	.proc_fops = &synclinkmp_proc_fops,
+	.proc_show = synclinkmp_proc_show,
 };
 
 

drivers/usb/serial/usb-serial.c

@@ -476,19 +476,6 @@ static int serial_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int serial_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, serial_proc_show, NULL);
-}
-
-static const struct file_operations serial_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= serial_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static int serial_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -1192,7 +1179,7 @@ static const struct tty_operations serial_ops = {
 	.get_icount =		serial_get_icount,
 	.cleanup =		serial_cleanup,
 	.install =		serial_install,
-	.proc_fops =		&serial_proc_fops,
+	.proc_show =		serial_proc_show,
 };
 
 

fs/proc/proc_tty.c

@@ -135,11 +135,11 @@ void proc_tty_register_driver(struct tty_driver *driver)
 	struct proc_dir_entry *ent;
 		
 	if (!driver->driver_name || driver->proc_entry ||
-	    !driver->ops->proc_fops)
+	    !driver->ops->proc_show)
 		return;
 
-	ent = proc_create_data(driver->driver_name, 0, proc_tty_driver,
-			       driver->ops->proc_fops, driver);
+	ent = proc_create_single_data(driver->driver_name, 0, proc_tty_driver,
+			       driver->ops->proc_show, driver);
 	driver->proc_entry = ent;
 }
 

include/linux/tty_driver.h

@@ -293,7 +293,7 @@ struct tty_operations {
 	int (*poll_get_char)(struct tty_driver *driver, int line);
 	void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
 #endif
-	const struct file_operations *proc_fops;
+	int (*proc_show)(struct seq_file *, void *);
 } __randomize_layout;
 
 struct tty_driver {