gpio: dwapb: Use "stride" rather than "size" for register distance

This terminology is more precise. Also cut the stride calculation
in the preprocessor, it confuses more than it helps when reading
the driver.

Acked-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/gpio/gpio-dwapb.c

@@ -53,9 +53,9 @@
 #define GPIO_EXT_PORTD		0x5c
 
 #define DWAPB_MAX_PORTS		4
-#define GPIO_EXT_PORT_SIZE	(GPIO_EXT_PORTB - GPIO_EXT_PORTA)
-#define GPIO_SWPORT_DR_SIZE	(GPIO_SWPORTB_DR - GPIO_SWPORTA_DR)
-#define GPIO_SWPORT_DDR_SIZE	(GPIO_SWPORTB_DDR - GPIO_SWPORTA_DDR)
+#define GPIO_EXT_PORT_STRIDE	0x04 /* register stride 32 bits */
+#define GPIO_SWPORT_DR_STRIDE	0x0c /* register stride 3*32 bits */
+#define GPIO_SWPORT_DDR_STRIDE	0x0c /* register stride 3*32 bits */
 
 #define GPIO_REG_OFFSET_V2	1
 
@@ -476,10 +476,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 		return -ENOMEM;
 #endif
 
-	dat = gpio->regs + GPIO_EXT_PORTA + (pp->idx * GPIO_EXT_PORT_SIZE);
-	set = gpio->regs + GPIO_SWPORTA_DR + (pp->idx * GPIO_SWPORT_DR_SIZE);
+	dat = gpio->regs + GPIO_EXT_PORTA + (pp->idx * GPIO_EXT_PORT_STRIDE);
+	set = gpio->regs + GPIO_SWPORTA_DR + (pp->idx * GPIO_SWPORT_DR_STRIDE);
 	dirout = gpio->regs + GPIO_SWPORTA_DDR +
-		(pp->idx * GPIO_SWPORT_DDR_SIZE);
+		(pp->idx * GPIO_SWPORT_DDR_STRIDE);
 
 	err = bgpio_init(&port->gc, gpio->dev, 4, dat, set, NULL, dirout,
 			 NULL, 0);
@@ -710,13 +710,13 @@ static int dwapb_gpio_suspend(struct device *dev)
 
 		BUG_ON(!ctx);
 
-		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_SIZE;
+		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE;
 		ctx->dir = dwapb_read(gpio, offset);
 
-		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_SIZE;
+		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE;
 		ctx->data = dwapb_read(gpio, offset);
 
-		offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_SIZE;
+		offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_STRIDE;
 		ctx->ext = dwapb_read(gpio, offset);
 
 		/* Only port A can provide interrupts */
@@ -753,13 +753,13 @@ static int dwapb_gpio_resume(struct device *dev)
 
 		BUG_ON(!ctx);
 
-		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_SIZE;
+		offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_STRIDE;
 		dwapb_write(gpio, offset, ctx->data);
 
-		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_SIZE;
+		offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_STRIDE;
 		dwapb_write(gpio, offset, ctx->dir);
 
-		offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_SIZE;
+		offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_STRIDE;
 		dwapb_write(gpio, offset, ctx->ext);
 
 		/* Only port A can provide interrupts */