Merge 'net-next/master'

Needed by the upcoming merge of iwlwifi-next-for-kalle-2016-03-02 tag.

Documentation/ABI/obsolete/sysfs-class-rfkill

@@ -1,29 +0,0 @@
-rfkill - radio frequency (RF) connector kill switch support
-
-For details to this subsystem look at Documentation/rfkill.txt.
-
-What:		/sys/class/rfkill/rfkill[0-9]+/state
-Date:		09-Jul-2007
-KernelVersion	v2.6.22
-Contact:	linux-wireless@vger.kernel.org
-Description: 	Current state of the transmitter.
-		This file is deprecated and scheduled to be removed in 2014,
-		because its not possible to express the 'soft and hard block'
-		state of the rfkill driver.
-Values: 	A numeric value.
-		0: RFKILL_STATE_SOFT_BLOCKED
-			transmitter is turned off by software
-		1: RFKILL_STATE_UNBLOCKED
-			transmitter is (potentially) active
-		2: RFKILL_STATE_HARD_BLOCKED
-			transmitter is forced off by something outside of
-			the driver's control.
-
-What:		/sys/class/rfkill/rfkill[0-9]+/claim
-Date:		09-Jul-2007
-KernelVersion	v2.6.22
-Contact:	linux-wireless@vger.kernel.org
-Description:	This file is deprecated because there no longer is a way to
-		claim just control over a single rfkill instance.
-		This file is scheduled to be removed in 2012.
-Values: 	0: Kernel handles events

Documentation/ABI/removed/sysfs-class-rfkill

@@ -0,0 +1,13 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/claim
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description:	This file was deprecated because there no longer was a way to
+		claim just control over a single rfkill instance.
+		This file was scheduled to be removed in 2012, and was removed
+		in 2016.
+Values: 	0: Kernel handles events

Documentation/ABI/stable/sysfs-class-rfkill

@@ -2,9 +2,8 @@ rfkill - radio frequency (RF) connector kill switch support
 
 For details to this subsystem look at Documentation/rfkill.txt.
 
-For the deprecated /sys/class/rfkill/*/state and
-/sys/class/rfkill/*/claim knobs of this interface look in
-Documentation/ABI/obsolete/sysfs-class-rfkill.
+For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
 
 What: 		/sys/class/rfkill
 Date:		09-Jul-2007
@@ -42,6 +41,28 @@ Values: 	A numeric value.
 		1: true
 
 
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file was scheduled to be removed in 2014, but due to its
+		large number of users it will be sticking around for a bit
+		longer. Despite it being marked as stabe, the newer "hard" and
+		"soft" interfaces should be preffered, since it is not possible
+		to express the 'soft and hard block' state of the rfkill driver
+		through this interface. There will likely be another attempt to
+		remove it in the future.
+Values: 	A numeric value.
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+
 What:		/sys/class/rfkill/rfkill[0-9]+/hard
 Date:		12-March-2010
 KernelVersion	v2.6.34

Documentation/ABI/testing/sysfs-class-net-batman-adv

@@ -1,4 +1,20 @@
 
+What:		/sys/class/net/<iface>/batman-adv/throughput_override
+Date:		Feb 2014
+Contact:	Antonio Quartulli <antonio@meshcoding.com>
+description:
+		Defines the throughput value to be used by B.A.T.M.A.N. V
+		when estimating the link throughput using this interface.
+		If the value is set to 0 then batman-adv will try to
+		estimate the throughput by itself.
+
+What:           /sys/class/net/<iface>/batman-adv/elp_interval
+Date:           Feb 2014
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its probing packets for link quality measurements.
+
 What:           /sys/class/net/<iface>/batman-adv/iface_status
 Date:           May 2010
 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
@@ -12,4 +28,3 @@ Description:
                 The /sys/class/net/<iface>/batman-adv/mesh_iface file
                 displays the batman mesh interface this <iface>
                 currently is associated with.
-

Documentation/cgroup-v2.txt

@@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
 conventions of cgroup v2.  It describes all userland-visible aspects
 of cgroup including core and specific controller behaviors.  All
 future changes must be reflected in this document.  Documentation for
-v1 is available under Documentation/cgroup-legacy/.
+v1 is available under Documentation/cgroup-v1/.
 
 CONTENTS
 
@@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.
 
+	  sock
+
+		Amount of memory used in network transmission buffers
+
 	  file_mapped
 
 		Amount of cached filesystem data mapped with mmap()

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
 clock-output-names:
  - "xin24m" - crystal input - required,
  - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
 
 Example: Clock controller node:
 

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:

Documentation/devicetree/bindings/net/can/ifi_canfd.txt

@@ -0,0 +1,15 @@
+IFI CANFD controller
+--------------------
+
+Required properties:
+  - compatible: Should be "ifi,canfd-1.0"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	canfd0: canfd@ff220000 {
+		compatible = "ifi,canfd-1.0";
+		reg = <0xff220000 0x00001000>;
+		interrupts = <0 43 0>;
+	};

Documentation/devicetree/bindings/net/can/rcar_can.txt

@@ -6,6 +6,15 @@ Required properties:
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
 	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+	      "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
+	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
+	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
+	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
+	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device.
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
 - clocks: phandles and clock specifiers for 3 CAN clock inputs.
@@ -25,7 +34,7 @@ Example
 SoC common .dtsi file:
 
 	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791";
+		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e80000 0 0x1000>;
 		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,

Documentation/devicetree/bindings/net/can/sja1000.txt

@@ -2,7 +2,7 @@ Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
 
 Required properties:
 
-- compatible : should be "nxp,sja1000".
+- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
 
 - reg : should specify the chip select, address offset and size required
 	to map the registers of the SJA1000. The size is usually 0x80.
@@ -14,6 +14,7 @@ Optional properties:
 
 - reg-io-width : Specify the size (in bytes) of the IO accesses that
 	should be performed on the device.  Valid value is 1, 2 or 4.
+	This property is ignored for technologic version.
 	Default to 1 (8 bits).
 
 - nxp,external-clock-frequency : Frequency of the external oscillator

Documentation/devicetree/bindings/net/macb.txt

@@ -25,7 +25,7 @@ Required properties:
 
 Optional properties for PHY child node:
 - reset-gpios : Should specify the gpio for phy reset
-- cdns,magic-packet : If present, indicates that the hardware supports waking
+- magic-packet : If present, indicates that the hardware supports waking
   up via magic packet.
 
 Examples:

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -82,8 +82,8 @@ Example:
 				  "ch16", "ch17", "ch18", "ch19",
 				  "ch20", "ch21", "ch22", "ch23",
 				  "ch24";
-		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
-		power-domains = <&cpg_clocks>;
+		clocks = <&cpg CPG_MOD 812>;
+		power-domains = <&cpg>;
 		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 

Documentation/devicetree/bindings/net/stmmac.txt

@@ -17,7 +17,25 @@ Required properties:
 	The 1st cell is reset pre-delay in micro seconds.
 	The 2nd cell is reset pulse in micro seconds.
 	The 3rd cell is reset post-delay in micro seconds.
+
+Optional properties:
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+	reset phandle is given
+- max-frame-size: See ethernet.txt file in the same directory
+- clocks: If present, the first clock should be the GMAC main clock and
+  the second clock should be peripheral's register interface clock. Further
+  clocks may be specified in derived bindings.
+- clock-names: One name for each entry in the clocks property, the
+  first one should be "stmmaceth" and the second one should be "pclk".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
+- tx-fifo-depth: See ethernet.txt file in the same directory
+- rx-fifo-depth: See ethernet.txt file in the same directory
 - snps,pbl		Programmable Burst Length
+- snps,aal		Address-Aligned Beats
 - snps,fixed-burst	Program the DMA to use the fixed burst mode
 - snps,mixed-burst	Program the DMA to use the mixed burst mode
 - snps,force_thresh_dma_mode	Force DMA to use the threshold mode for
@@ -29,27 +47,28 @@ Required properties:
 				supported by this device instance
 - snps,perfect-filter-entries:	Number of perfect filter entries supported
 				by this device instance
-
-Optional properties:
-- resets: Should contain a phandle to the STMMAC reset signal, if any
-- reset-names: Should contain the reset signal name "stmmaceth", if a
-	reset phandle is given
-- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock
-  The optional second clock should be peripheral's register interface clock.
-  The third optional clock should be the ptp reference clock.
-  Further clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property.
-  The first one should be "stmmaceth".
-  The optional second one should be "pclk".
-  The optional third one should be "clk_ptp_ref".
-- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
-- tx-fifo-depth: See ethernet.txt file in the same directory
-- rx-fifo-depth: See ethernet.txt file in the same directory
+- AXI BUS Mode parameters: below the list of all the parameters to program the
+			   AXI register inside the DMA module:
+	- snps,lpi_en: enable Low Power Interface
+	- snps,xit_frm: unlock on WoL
+	- snps,wr_osr_lmt: max write oustanding req. limit
+	- snps,rd_osr_lmt: max read oustanding req. limit
+	- snps,kbbe: do not cross 1KiB boundary.
+	- snps,axi_all: align address
+	- snps,blen: this is a vector of supported burst length.
+	- snps,fb: fixed-burst
+	- snps,mb: mixed-burst
+	- snps,rb: rebuild INCRx Burst
 - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
 
 Examples:
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <256 128 64 32 0 0 0>;
+	};
+
 	gmac0: ethernet@e0800000 {
 		compatible = "st,spear600-gmac";
 		reg = <0xe0800000 0x8000>;
@@ -65,6 +84,7 @@ Examples:
 		tx-fifo-depth = <16384>;
 		clocks = <&clock>;
 		clock-names = "stmmaceth";
+		snps,axi-config = <&stmmac_axi_setup>;
 		mdio0 {
 			#address-cells = <1>;
 			#size-cells = <0>;

Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt

@@ -8,6 +8,7 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
+	      "renesas,pci-r8a7793" for the R8A7793 SoC;
 	      "renesas,pci-r8a7794" for the R8A7794 SoC;
 	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
 

Documentation/devicetree/bindings/pci/rcar-pci.txt

@@ -4,6 +4,7 @@ Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
 

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -14,6 +14,10 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
@@ -21,4 +25,6 @@ Example:
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

@@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
  "fsl,imx-audio-sgtl5000"
  (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
 
+ "fsl,imx-audio-wm8960"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.

Documentation/devicetree/bindings/thermal/rcar-thermal.txt

@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <115000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-gen2-thermal",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -111,6 +111,7 @@ hp	Hewlett Packard
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
+ifi	Ingenieurburo Fur Ic-Technologie (I/F/I)
 iom	Iomega Corporation
 img	Imagination Technologies Ltd.
 ingenic	Ingenic Semiconductor

Documentation/filesystems/efivarfs.txt

@@ -14,3 +14,10 @@ filesystem.
 efivarfs is typically mounted like this,
 
 	mount -t efivarfs none /sys/firmware/efi/efivars
+
+Due to the presence of numerous firmware bugs where removing non-standard
+UEFI variables causes the system firmware to fail to POST, efivarfs
+files that are not well-known standardized variables are created
+as immutable files.  This doesn't prevent removal - "chattr -i" will work -
+but it does prevent this kind of failure from being accomplished
+accidentally.

Documentation/filesystems/proc.txt

@@ -240,8 +240,8 @@ Table 1-2: Contents of the status files (as of 4.1)
  RssFile                     size of resident file mappings
  RssShmem                    size of resident shmem memory (includes SysV shm,
                              mapping of tmpfs and shared anonymous mappings)
- VmData                      size of data, stack, and text segments
- VmStk                       size of data, stack, and text segments
+ VmData                      size of private data segments
+ VmStk                       size of stack segments
  VmExe                       size of text segment
  VmLib                       size of shared library code
  VmPTE                       size of page table entries
@@ -356,7 +356,7 @@ address           perms offset  dev   inode      pathname
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack:1001]
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
 a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
 a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
@@ -388,7 +388,6 @@ is not associated with a file:
 
  [heap]                   = the heap of the program
  [stack]                  = the stack of the main process
- [stack:1001]             = the stack of the thread with tid 1001
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
 
@@ -396,10 +395,8 @@ is not associated with a file:
 
 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
 of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. This is a key difference from the
-content of /proc/PID/maps, where you will see all mappings that are being used
-as stack by all of those tasks. Hence, for the example above, the task-level
-map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+as [stack] if that task sees it as a stack. Hence, for the example above, the
+task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
 
 08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test

Documentation/kernel-parameters.txt

@@ -1496,6 +1496,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			could change it dynamically, usually by
 			/sys/module/printk/parameters/ignore_loglevel.
 
+	ignore_rlimit_data
+			Ignore RLIMIT_DATA setting for data mappings,
+			print warning at first misuse.  Can be changed via
+			/sys/module/kernel/parameters/ignore_rlimit_data.
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
@@ -4230,6 +4235,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The default value of this parameter is determined by
 			the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
 
+	workqueue.debug_force_rr_cpu
+			Workqueue used to implicitly guarantee that work
+			items queued without explicit CPU specified are put
+			on the local CPU.  This guarantee is no longer true
+			and while local CPU is still preferred work items
+			may be put on foreign CPUs.  This debug option
+			forces round-robin CPU selection to flush out
+			usages which depend on the now broken guarantee.
+			When enabled, memory and cache locality will be
+			impacted.
+
 	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
 			default x2apic cluster mode on platforms
 			supporting x2apic.

Documentation/networking/dsa/dsa.txt

@@ -524,17 +524,14 @@ Bridge layer
 - port_join_bridge: bridge layer function invoked when a given switch port is
   added to a bridge, this function should be doing the necessary at the switch
   level to permit the joining port from being added to the relevant logical
-  domain for it to ingress/egress traffic with other members of the bridge. DSA
-  does nothing but calculate a bitmask of switch ports currently members of the
-  specified bridge being requested the join
+  domain for it to ingress/egress traffic with other members of the bridge.
 
 - port_leave_bridge: bridge layer function invoked when a given switch port is
   removed from a bridge, this function should be doing the necessary at the
   switch level to deny the leaving port from ingress/egress traffic from the
   remaining bridge members. When the port leaves the bridge, it should be aged
   out at the switch hardware for the switch to (re) learn MAC addresses behind
-  this port. DSA calculates the bitmask of ports still members of the bridge
-  being left
+  this port.
 
 - port_stp_update: bridge layer function invoked when a given switch port STP
   state is computed by the bridge layer and should be propagated to switch
@@ -545,20 +542,15 @@ Bridge layer
 Bridge VLAN filtering
 ---------------------
 
-- port_pvid_get: bridge layer function invoked when a Port-based VLAN ID is
-  queried for the given switch port
-
-- port_pvid_set: bridge layer function invoked when a Port-based VLAN ID needs
-  to be configured on the given switch port
-
 - port_vlan_add: bridge layer function invoked when a VLAN is configured
   (tagged or untagged) for the given switch port
 
 - port_vlan_del: bridge layer function invoked when a VLAN is removed from the
   given switch port
 
-- vlan_getnext: bridge layer function invoked to query the next configured VLAN
-  in the switch, i.e. returns the bitmaps of members and untagged ports
+- port_vlan_dump: bridge layer function invoked with a switchdev callback
+  function that the driver has to call for each VLAN the given port is a member
+  of. A switchdev object is used to carry the VID and bridge flags.
 
 - port_fdb_add: bridge layer function invoked when the bridge wants to install a
   Forwarding Database entry, the switch hardware should be programmed with the

Documentation/networking/ip-sysctl.txt

@@ -1563,6 +1563,15 @@ temp_prefered_lft - INTEGER
 	Preferred lifetime (in seconds) for temporary addresses.
 	Default: 86400 (1 day)
 
+keep_addr_on_down - INTEGER
+	Keep all IPv6 addresses on an interface down event. If set static
+	global addresses with no expiration time are not flushed.
+	  >0 : enabled
+	   0 : system default
+	  <0 : disabled
+
+	Default: 0 (addresses are removed)
+
 max_desync_factor - INTEGER
 	Maximum value for DESYNC_FACTOR, which is a random value
 	that ensures that clients don't synchronize with each

Documentation/networking/mac80211-injection.txt

@@ -28,6 +28,23 @@ radiotap headers and used to control injection:
    IEEE80211_RADIOTAP_F_TX_NOACK: frame should be sent without waiting for
 				  an ACK even if it is a unicast frame
 
+ * IEEE80211_RADIOTAP_RATE
+
+   legacy rate for the transmission (only for devices without own rate control)
+
+ * IEEE80211_RADIOTAP_MCS
+
+   HT rate for the transmission (only for devices without own rate control).
+   Also some flags are parsed
+
+   IEEE80211_TX_RC_SHORT_GI: use short guard interval
+   IEEE80211_TX_RC_40_MHZ_WIDTH: send in HT40 mode
+
+ * IEEE80211_RADIOTAP_DATA_RETRIES
+
+   number of retries when either IEEE80211_RADIOTAP_RATE or
+   IEEE80211_RADIOTAP_MCS was used
+
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.
 

Documentation/networking/rds.txt

@@ -19,9 +19,7 @@ to N*N if you use a connection-oriented socket transport like TCP.
 
 RDS is not Infiniband-specific; it was designed to support different
 transports.  The current implementation used to support RDS over TCP as well
-as IB. Work is in progress to support RDS over iWARP, and using DCE to
-guarantee no dropped packets on Ethernet, it may be possible to use RDS over
-UDP in the future.
+as IB.
 
 The high-level semantics of RDS from the application's point of view are
 

Documentation/rfkill.txt

@@ -83,6 +83,8 @@ rfkill drivers that control devices that can be hard-blocked unless they also
 assign the poll_hw_block() callback (then the rfkill core will poll the
 device). Don't do this unless you cannot get the event in any other way.
 
+RFKill provides per-switch LED triggers, which can be used to drive LEDs
+according to the switch state (LED_FULL when blocked, LED_OFF otherwise).
 
 
 5. Userspace support

Documentation/timers/hpet.txt

@@ -1,9 +1,7 @@
 		High Precision Event Timer Driver for Linux
 
 The High Precision Event Timer (HPET) hardware follows a specification
-by Intel and Microsoft which can be found at
-
-	http://www.intel.com/hardwaredesign/hpetspec_1.pdf
+by Intel and Microsoft, revision 1.
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,

MAINTAINERS

@@ -151,7 +151,7 @@ S:	Maintained
 F:	drivers/scsi/53c700*
 
 6LOWPAN GENERIC (BTLE/IEEE 802.15.4)
-M:	Alexander Aring <alex.aring@gmail.com>
+M:	Alexander Aring <aar@pengutronix.de>
 M:	Jukka Rissanen <jukka.rissanen@linux.intel.com>
 L:	linux-bluetooth@vger.kernel.org
 L:	linux-wpan@vger.kernel.org
@@ -223,9 +223,7 @@ F:	drivers/scsi/aacraid/
 
 ABI/API
 L:	linux-api@vger.kernel.org
-F:	Documentation/ABI/
 F:	include/linux/syscalls.h
-F:	include/uapi/
 F:	kernel/sys_ni.c
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
@@ -686,13 +684,6 @@ M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/macintosh/ams/
 
-AMSO1100 RNIC DRIVER
-M:	Tom Tucker <tom@opengridcomputing.com>
-M:	Steve Wise <swise@opengridcomputing.com>
-L:	linux-rdma@vger.kernel.org
-S:	Maintained
-F:	drivers/infiniband/hw/amso1100/
-
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
@@ -967,6 +958,8 @@ M:	Rob Herring <robh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-highbank/
+F:	arch/arm/boot/dts/highbank.dts
+F:	arch/arm/boot/dts/ecx-*.dts*
 
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
@@ -1042,6 +1035,7 @@ M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/prima2*
 F:	arch/arm/mach-prima2/
 F:	drivers/clk/sirf/
 F:	drivers/clocksource/timer-prima2.c
@@ -1143,6 +1137,10 @@ W:	http://www.hisilicon.com
 S:	Supported
 T:	git git://github.com/hisilicon/linux-hisi.git
 F:	arch/arm/mach-hisi/
+F:	arch/arm/boot/dts/hi3*
+F:	arch/arm/boot/dts/hip*
+F:	arch/arm/boot/dts/hisi*
+F:	arch/arm64/boot/dts/hisilicon/
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
@@ -1219,6 +1217,7 @@ M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
+F:	arch/arm/boot/dts/k2*
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
 
 ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
@@ -1287,6 +1286,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-berlin/
 F:	arch/arm/boot/dts/berlin*
+F:	arch/arm64/boot/dts/marvell/berlin*
 
 
 ARM/Marvell Dove/MV78xx0/Orion SOC support
@@ -1425,6 +1425,7 @@ S:	Maintained
 F:	arch/arm/boot/dts/qcom-*.dts
 F:	arch/arm/boot/dts/qcom-*.dtsi
 F:	arch/arm/mach-qcom/
+F:	arch/arm64/boot/dts/qcom/*
 F:	drivers/soc/qcom/
 F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
@@ -1441,8 +1442,8 @@ S:	Maintained
 ARM/RENESAS ARM64 ARCHITECTURE
 M:	Simon Horman <horms@verge.net.au>
 M:	Magnus Damm <magnus.damm@gmail.com>
-L:	linux-sh@vger.kernel.org
-Q:	http://patchwork.kernel.org/project/linux-sh/list/
+L:	linux-renesas-soc@vger.kernel.org
+Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported
 F:	arch/arm64/boot/dts/renesas/
@@ -1484,6 +1485,8 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
+F:	arch/arm/boot/dts/s5p*
+F:	arch/arm/boot/dts/samsung*
 F:	arch/arm/boot/dts/exynos*
 F:	arch/arm64/boot/dts/exynos/
 F:	arch/arm/plat-samsung/
@@ -1563,6 +1566,7 @@ S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
 F:	arch/arm/configs/socfpga_defconfig
+F:	arch/arm64/boot/dts/altera/
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
@@ -1716,7 +1720,7 @@ M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
-F:	arch/arm64/boot/dts/arm/vexpress*
+F:	arch/arm64/boot/dts/arm/
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
@@ -2148,6 +2152,7 @@ M:	Simon Wunderlich <sw@simonwunderlich.de>
 M:	Antonio Quartulli <a@unstable.cc>
 L:	b.a.t.m.a.n@lists.open-mesh.org
 W:	https://www.open-mesh.org/
+Q:	https://patchwork.open-mesh.org/project/batman/list/
 S:	Maintained
 F:	net/batman-adv/
 
@@ -2343,6 +2348,7 @@ F:	arch/arm/mach-bcm/
 F:	arch/arm/boot/dts/bcm113*
 F:	arch/arm/boot/dts/bcm216*
 F:	arch/arm/boot/dts/bcm281*
+F:	arch/arm64/boot/dts/broadcom/
 F:	arch/arm/configs/bcm_defconfig
 F:	drivers/mmc/host/sdhci-bcm-kona.c
 F:	drivers/clocksource/bcm_kona_timer.c
@@ -2357,14 +2363,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
 S:	Maintained
 N:	bcm2835
 
-BROADCOM BCM33XX MIPS ARCHITECTURE
-M:	Kevin Cernekee <cernekee@gmail.com>
-L:	linux-mips@linux-mips.org
-S:	Maintained
-F:	arch/mips/bcm3384/*
-F:	arch/mips/include/asm/mach-bcm3384/*
-F:	arch/mips/kernel/*bmips*
-
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
@@ -3446,7 +3444,7 @@ S:	Maintained
 F:	drivers/usb/dwc2/
 
 DESIGNWARE USB3 DRD IP DRIVER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -3502,6 +3500,14 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 F:	include/uapi/linux/dm-*.h
 
+DEVLINK
+M:	Jiri Pirko <jiri@mellanox.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	net/core/devlink.c
+F:	include/net/devlink.h
+F:	include/uapi/linux/devlink.h
+
 DIALOG SEMICONDUCTOR DRIVERS
 M:	Support Opensource <support.opensource@diasemi.com>
 W:	http://www.dialog-semiconductor.com/products
@@ -4185,13 +4191,6 @@ W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
 F:	fs/efs/
 
-EHCA (IBM GX bus InfiniBand adapter) DRIVER
-M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
-M:	Christoph Raisch <raisch@de.ibm.com>
-L:	linux-rdma@vger.kernel.org
-S:	Supported
-F:	drivers/infiniband/hw/ehca/
-
 EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
 M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
@@ -5425,10 +5424,11 @@ S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 802.15.4 SUBSYSTEM
-M:	Alexander Aring <alex.aring@gmail.com>
+M:	Alexander Aring <aar@pengutronix.de>
 L:	linux-wpan@vger.kernel.org
-W:	https://github.com/linux-wpan
-T:	git git://github.com/linux-wpan/linux-wpan-next.git
+W:	http://wpan.cakelab.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	net/ieee802154/
 F:	net/mac802154/
@@ -5810,12 +5810,6 @@ M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c
 
-IPATH DRIVER
-M:	Mike Marciniszyn <infinipath@intel.com>
-L:	linux-rdma@vger.kernel.org
-S:	Maintained
-F:	drivers/staging/rdma/ipath/
-
 IPMI SUBSYSTEM
 M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
@@ -6145,7 +6139,7 @@ F:	include/uapi/linux/sunrpc/
 
 KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuahkh@osg.samsung.com>
-L:	linux-api@vger.kernel.org
+L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/shuah/linux-kselftest
 S:	Maintained
 F:	tools/testing/selftests
@@ -7371,7 +7365,7 @@ F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -7507,7 +7501,6 @@ F:	net/netrom/
 
 NETRONOME ETHERNET DRIVERS
 M:	Jakub Kicinski <jakub.kicinski@netronome.com>
-M:	Rolf Neugebauer <rolf.neugebauer@netronome.com>
 L:	oss-drivers@netronome.com
 S:	Maintained
 F:	drivers/net/ethernet/netronome/
@@ -7940,7 +7933,7 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -8819,6 +8812,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://github.com/rjarzmik/linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/pxa*
 F:	arch/arm/mach-pxa/
 F:	drivers/dma/pxa*
 F:	drivers/pcmcia/pxa2xx*
@@ -8848,6 +8842,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
 
 PXA MMCI DRIVER
@@ -9081,10 +9076,14 @@ S:	Maintained
 F:	drivers/net/ethernet/rdc/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-M:	Chien Yen <chien.yen@oracle.com>
+M:	Santosh Shilimkar <santosh.shilimkar@oracle.com>
+L:	netdev@vger.kernel.org
+L:	linux-rdma@vger.kernel.org
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
+W:	https://oss.oracle.com/projects/rds/
 S:	Supported
 F:	net/rds/
+F:	Documentation/networking/rds.txt
 
 READ-COPY UPDATE (RCU)
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
@@ -9794,10 +9793,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/
 
 Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
-M:	Sathya Perla <sathya.perla@avagotech.com>
-M:	Ajit Khaparde <ajit.khaparde@avagotech.com>
-M:	Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
-M:	Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
+M:	Sathya Perla <sathya.perla@broadcom.com>
+M:	Ajit Khaparde <ajit.khaparde@broadcom.com>
+M:	Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
+M:	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
+M:	Somnath Kotur <somnath.kotur@broadcom.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported
@@ -10159,6 +10159,7 @@ S:	Supported
 F:	drivers/media/pci/solo6x10/
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
+M:	Shaohua Li <shli@kernel.org>
 L:	linux-raid@vger.kernel.org
 T:	git git://neil.brown.name/md
 S:	Supported
@@ -10292,6 +10293,7 @@ L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
+F:	arch/arm/boot/dts/spear*
 F:	arch/arm/mach-spear/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
@@ -11319,7 +11321,7 @@ F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -11343,6 +11345,13 @@ S:	Maintained
 F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
+USB LAN78XX ETHERNET DRIVER
+M:	Woojung Huh <woojung.huh@microchip.com>
+M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/usb/lan78xx.*
+
 USB MASS STORAGE DRIVER
 M:	Matthew Dharm <mdharm-usb@one-eyed-alien.net>
 L:	linux-usb@vger.kernel.org
@@ -11395,7 +11404,7 @@ S:	Maintained
 F:	drivers/net/usb/pegasus.*
 
 USB PHY LAYER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -12025,7 +12034,6 @@ F:	arch/arm64/xen/
 F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
-M:	Ian Campbell <ian.campbell@citrix.com>
 M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
@@ -12134,7 +12142,7 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
 
 ZBUD COMPRESSED PAGE ALLOCATOR
-M:	Seth Jennings <sjennings@variantweb.net>
+M:	Seth Jennings <sjenning@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zbud.c
@@ -12189,7 +12197,7 @@ F:	include/linux/zsmalloc.h
 F:	Documentation/vm/zsmalloc.txt
 
 ZSWAP COMPRESSED SWAP CACHING
-M:	Seth Jennings <sjennings@variantweb.net>
+M:	Seth Jennings <sjenning@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/alpha/include/uapi/asm/socket.h

@@ -95,4 +95,6 @@
 #define SO_ATTACH_REUSEPORT_CBPF	51
 #define SO_ATTACH_REUSEPORT_EBPF	52
 
+#define SO_CNX_ADVICE		53
+
 #endif /* _UAPI_ASM_SOCKET_H */

arch/arc/Kconfig

@@ -338,6 +338,19 @@ config ARC_PAGE_SIZE_4K
 
 endchoice
 
+choice
+	prompt "MMU Super Page Size"
+	depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
+	default ARC_HUGEPAGE_2M
+
+config ARC_HUGEPAGE_2M
+	bool "2MB"
+
+config ARC_HUGEPAGE_16M
+	bool "16MB"
+
+endchoice
+
 if ISA_ARCOMPACT
 
 config ARC_COMPACT_IRQ_LEVELS
@@ -410,7 +423,7 @@ config ARC_HAS_RTC
 	default n
 	depends on !SMP
 
-config ARC_HAS_GRTC
+config ARC_HAS_GFRC
 	bool "SMP synchronized 64-bit cycle counter"
 	default y
 	depends on SMP
@@ -566,6 +579,12 @@ endmenu
 endmenu	 # "ARC Architecture Configuration"
 
 source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "12" if ARC_HUGEPAGE_16M
+	default "11"
+
 source "net/Kconfig"
 source "drivers/Kconfig"
 source "fs/Kconfig"

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_HAS_GRTC is not set
+# CONFIG_ARC_HAS_GFRC is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y

arch/arc/include/asm/arcregs.h

@@ -349,14 +349,13 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
 	struct bcr_isa isa;
-	struct bcr_timer timers;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
 			     fpu_sp:1, fpu_dp:1, pad2:6,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
-			     pad4:8;
+			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
 	struct bcr_extn_xymem extn_xymem;

arch/arc/include/asm/irqflags-arcv2.h

@@ -30,8 +30,11 @@
 /* Was Intr taken in User Mode */
 #define AUX_IRQ_ACT_BIT_U	31
 
-/* 0 is highest level, but taken by FIRQs, if present in design */
-#define ARCV2_IRQ_DEF_PRIO		0
+/*
+ * User space should be interruptable even by lowest prio interrupt
+ * Safe even if actual interrupt priorities is fewer or even one
+ */
+#define ARCV2_IRQ_DEF_PRIO	15
 
 /* seed value for status register */
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \

arch/arc/include/asm/mcip.h

@@ -39,8 +39,8 @@ struct mcip_cmd {
 #define CMD_DEBUG_SET_MASK		0x34
 #define CMD_DEBUG_SET_SELECT		0x36
 
-#define CMD_GRTC_READ_LO		0x42
-#define CMD_GRTC_READ_HI		0x43
+#define CMD_GFRC_READ_LO		0x42
+#define CMD_GFRC_READ_HI		0x43
 
 #define CMD_IDU_ENABLE			0x71
 #define CMD_IDU_DISABLE			0x72

arch/arc/include/asm/pgtable.h

@@ -179,37 +179,44 @@
 #define __S111  PAGE_U_X_W_R
 
 /****************************************************************
- * Page Table Lookup split
+ * 2 tier (PGD:PTE) software page walker
  *
- * We implement 2 tier paging and since this is all software, we are free
- * to customize the span of a PGD / PTE entry to suit us
- *
- *			32 bit virtual address
+ * [31]		    32 bit virtual address              [0]
  * -------------------------------------------------------
- * | BITS_FOR_PGD    |  BITS_FOR_PTE    |  BITS_IN_PAGE  |
+ * |               | <------------ PGDIR_SHIFT ----------> |
+ * |		   |					 |
+ * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
  * -------------------------------------------------------
  *       |                  |                |
  *       |                  |                --> off in page frame
- *       |		    |
  *       |                  ---> index into Page Table
- *       |
  *       ----> index into Page Directory
+ *
+ * In a single page size configuration, only PAGE_SHIFT is fixed
+ * So both PGD and PTE sizing can be tweaked
+ *  e.g. 8K page (PAGE_SHIFT 13) can have
+ *  - PGDIR_SHIFT 21  -> 11:8:13 address split
+ *  - PGDIR_SHIFT 24  -> 8:11:13 address split
+ *
+ * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
+ * so the sizing flexibility is gone.
  */
 
-#define BITS_IN_PAGE	PAGE_SHIFT
-
-/* Optimal Sizing of Pg Tbl - based on MMU page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_8K)
-#define BITS_FOR_PTE	8		/* 11:8:13 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define BITS_FOR_PTE	8		/* 10:8:14 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define BITS_FOR_PTE	9		/* 11:9:12 */
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT	24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT	21
+#else
+/*
+ * Only Normal page support so "hackable" (see comment above)
+ * Default value provides 11:8:13 (8K), 11:9:12 (4K)
+ */
+#define PGDIR_SHIFT	21
 #endif
 
-#define BITS_FOR_PGD	(32 - BITS_FOR_PTE - BITS_IN_PAGE)
+#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
+#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)
 
-#define PGDIR_SHIFT	(32 - BITS_FOR_PGD)
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)	/* vaddr span, not PDG sz */
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 

arch/arc/kernel/entry-arcv2.S

@@ -211,7 +211,11 @@ debug_marker_syscall:
 ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
 ; entry was via Exception in DS which got preempted in kernel).
 ;
-; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
+;
+; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
+; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
+
 .Lintr_ret_to_delay_slot:
 debug_marker_ds:
 
@@ -222,18 +226,23 @@ debug_marker_ds:
 	ld	r2, [sp, PT_ret]
 	ld	r3, [sp, PT_status32]
 
+	; STAT32 for Int return created from scratch
+	; (No delay dlot, disable Further intr in trampoline)
+
 	bic  	r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
 	st	r0, [sp, PT_status32]
 
 	mov	r1, .Lintr_ret_to_delay_slot_2
 	st	r1, [sp, PT_ret]
 
+	; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
 	st	r2, [sp, 0]
 	st	r3, [sp, 4]
 
 	b	.Lisr_ret_fast_path
 
 .Lintr_ret_to_delay_slot_2:
+	; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
 	sub	sp, sp, SZ_PT_REGS
 	st	r9, [sp, -4]
 
@@ -243,11 +252,19 @@ debug_marker_ds:
 	ld	r9, [sp, 4]
 	sr	r9, [erstatus]
 
+	; restore AUX_USER_SP if returning to U mode
+	bbit0	r9, STATUS_U_BIT, 1f
+	ld	r9, [sp, PT_sp]
+	sr	r9, [AUX_USER_SP]
+
+1:
 	ld	r9, [sp, 8]
 	sr	r9, [erbta]
 
 	ld	r9, [sp, -4]
 	add	sp, sp, SZ_PT_REGS
+
+	; return from pure kernel mode to delay slot
 	rtie
 
 END(ret_from_exception)

arch/arc/kernel/intc-arcv2.c

@@ -14,6 +14,8 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>
 
+static int irq_prio;
+
 /*
  * Early Hardware specific Interrupt setup
  * -Called very early (start_kernel -> setup_arch -> setup_processor)
@@ -24,6 +26,14 @@ void arc_init_IRQ(void)
 {
 	unsigned int tmp;
 
+	struct irq_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
+#else
+		unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
+#endif
+	} irq_bcr;
+
 	struct aux_irq_ctrl {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int res3:18, save_idx_regs:1, res2:1,
@@ -46,28 +56,25 @@ void arc_init_IRQ(void)
 
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
-	/* setup status32, don't enable intr yet as kernel doesn't want */
-	tmp = read_aux_reg(0xa);
-	tmp |= ISA_INIT_STATUS_BITS;
-	tmp &= ~STATUS_IE_MASK;
-	asm volatile("flag %0	\n"::"r"(tmp));
-
 	/*
 	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
-	 *
-	 * Read the intc BCR to confirm that Linux default priority is avail
-	 * in h/w
-	 *
-	 * Note:
-	 *  IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
-	 *  is 0 based.
 	 */
-	tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
-	if (ARCV2_IRQ_DEF_PRIO > tmp)
-		panic("Linux default irq prio incorrect\n");
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+
+	irq_prio = irq_bcr.prio;	/* Encoded as N-1 for N levels */
+	pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
+		irq_prio + 1, irq_prio,
+		irq_bcr.firq ? " FIRQ (not used)":"");
+
+	/* setup status32, don't enable intr yet as kernel doesn't want */
+	tmp = read_aux_reg(0xa);
+	tmp |= STATUS_AD_MASK | (irq_prio << 1);
+	tmp &= ~STATUS_IE_MASK;
+	asm volatile("flag %0	\n"::"r"(tmp));
 }
 
 static void arcv2_irq_mask(struct irq_data *data)
@@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
-	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+	write_aux_reg(AUX_IRQ_PRIORITY, irq_prio);
 
 	/*
 	 * hw auto enables (linux unmask) all by default

arch/arc/kernel/mcip.c

@@ -96,13 +96,13 @@ static void mcip_probe_n_setup(void)
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int pad3:8,
 			     idu:1, llm:1, num_cores:6,
-			     iocoh:1,  grtc:1, dbg:1, pad2:1,
+			     iocoh:1,  gfrc:1, dbg:1, pad2:1,
 			     msg:1, sem:1, ipi:1, pad:1,
 			     ver:8;
 #else
 		unsigned int ver:8,
 			     pad:1, ipi:1, sem:1, msg:1,
-			     pad2:1, dbg:1, grtc:1, iocoh:1,
+			     pad2:1, dbg:1, gfrc:1, iocoh:1,
 			     num_cores:6, llm:1, idu:1,
 			     pad3:8;
 #endif
@@ -116,7 +116,7 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
-		IS_AVAIL1(mp.grtc, "GRTC"));
+		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	idu_detected = mp.idu;
 
@@ -125,8 +125,8 @@ static void mcip_probe_n_setup(void)
 		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
 	}
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
-		panic("kernel trying to use non-existent GRTC\n");
+	if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
+		panic("kernel trying to use non-existent GFRC\n");
 }
 
 struct plat_smp_ops plat_smp_ops = {

arch/arc/kernel/setup.c

@@ -45,6 +45,7 @@ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 static void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
+	struct bcr_timer timer;
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	unsigned long perip_space;
@@ -53,7 +54,11 @@ static void read_arc_build_cfg_regs(void)
 	READ_BCR(AUX_IDENTITY, cpu->core);
 	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
-	READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	cpu->extn.timer0 = timer.t0;
+	cpu->extn.timer1 = timer.t1;
+	cpu->extn.rtc = timer.rtc;
+
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
@@ -208,9 +213,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       (unsigned int)(arc_get_core_freq() / 10000) % 100);
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->timers.t0, "Timer0 "),
-		       IS_AVAIL1(cpu->timers.t1, "Timer1 "),
-		       IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
+		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
+		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
+		       IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
 				 CONFIG_ARC_HAS_RTC));
 
 	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
@@ -293,13 +298,13 @@ static void arc_chk_core_config(void)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	int fpu_enabled;
 
-	if (!cpu->timers.t0)
+	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");
 
-	if (!cpu->timers.t1)
+	if (!cpu->extn.timer1)
 		panic("Timer1 is not present!\n");
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
+	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
 		panic("RTC is not present\n");
 
 #ifdef CONFIG_ARC_HAS_DCCM
@@ -334,6 +339,7 @@ static void arc_chk_core_config(void)
 		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
 
 	if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
+	    IS_ENABLED(CONFIG_ARC_HAS_LLSC) &&
 	    !IS_ENABLED(CONFIG_ARC_STAR_9000923308))
 		panic("llock/scond livelock workaround missing\n");
 }

arch/arc/kernel/time.c

@@ -62,7 +62,7 @@
 
 /********** Clock Source Device *********/
 
-#ifdef CONFIG_ARC_HAS_GRTC
+#ifdef CONFIG_ARC_HAS_GFRC
 
 static int arc_counter_setup(void)
 {
@@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 
 	local_irq_save(flags);
 
-	__mcip_cmd(CMD_GRTC_READ_LO, 0);
+	__mcip_cmd(CMD_GFRC_READ_LO, 0);
 	stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
 
-	__mcip_cmd(CMD_GRTC_READ_HI, 0);
+	__mcip_cmd(CMD_GFRC_READ_HI, 0);
 	stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	local_irq_restore(flags);
@@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 }
 
 static struct clocksource arc_counter = {
-	.name   = "ARConnect GRTC",
+	.name   = "ARConnect GFRC",
 	.rating = 400,
 	.read   = arc_counter_read,
 	.mask   = CLOCKSOURCE_MASK(64),

arch/arm/boot/dts/am33xx.dtsi

@@ -439,6 +439,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};

arch/arm/boot/dts/am4372.dtsi

@@ -73,7 +73,7 @@
 	global_timer: timer@48240200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
 		clocks = <&mpu_periphclk>;
 	};
@@ -81,7 +81,7 @@
 	local_timer: timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
 		clocks = <&mpu_periphclk>;
 	};
@@ -290,6 +290,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -590,8 +590,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
@@ -599,7 +597,7 @@
 		 * 0x264 represents the offset of padconf register of
 		 * gpio3_22 from am43xx_pinmux base.
 		 */
-		interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
 				      <&am43xx_pinmux 0x264>;
 		interrupt-names = "tsc", "wakeup";
 

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -491,7 +491,7 @@
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
 
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -167,7 +167,7 @@
 			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
 			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
 			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
 		>;
 	};
 
@@ -492,14 +492,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_pins>;
 
-	spi-max-frequency = <20000000>;
+	spi-max-frequency = <48000000>;
 
 	spi_flash: spi_flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spansion,m25p80", "jedec,spi-nor";
 		reg = <0>;				/* CS0 */
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <48000000>;
 
 		partition@0 {
 			label = "uboot";
@@ -559,13 +559,13 @@
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
@@ -588,7 +588,7 @@
 };
 
 &usb2 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };
 
 &mcasp3 {

arch/arm/boot/dts/am57xx-sbc-am57x.dts

@@ -25,8 +25,8 @@
 &dra7_pmx_core {
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2)	/* uart2_ctsn.uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1)	/* uart2_rtsn.uart3_txd */
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
 		>;
 	};
 
@@ -108,9 +108,9 @@
 	pinctrl-0 = <&i2c5_pins_default>;
 	clock-frequency = <400000>;
 
-	eeprom_base: atmel@50 {
+	eeprom_base: atmel@54 {
 		compatible = "atmel,24c08";
-		reg = <0x50>;
+		reg = <0x54>;
 		pagesize = <16>;
 	};
 

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -152,6 +152,7 @@
 				nand-on-flash-bbt;
 
 				partitions {
+					compatible = "fixed-partitions";
 					#address-cells = <1>;
 					#size-cells = <1>;
 

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -114,9 +114,15 @@
 
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default>;
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			pdmic@f8018000 {
@@ -300,6 +306,10 @@
 					bias-disable;
 				};
 
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+				};
+
 				pinctrl_pdmic_default: pdmic_default {
 					pinmux = <PIN_PB26__PDMIC_DAT>,
 						<PIN_PB27__PDMIC_CLK>;

arch/arm/boot/dts/at91-sama5d4_xplained.dts

@@ -86,10 +86,12 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@@ -152,6 +154,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};

arch/arm/boot/dts/at91-sama5d4ek.dts

@@ -160,8 +160,15 @@
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -193,6 +200,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -215,7 +215,7 @@
 	};
 
 	panel: panel {
-		compatible = "qd,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40", "simple-panel";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;

arch/arm/boot/dts/kirkwood-lswvl.dts

@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WVL/VL
  *
- * Copyright (C) 2015, rogershimizu@gmail.com
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -156,21 +157,21 @@
 		button@1 {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
 
 		button@2 {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 
 		button@3 {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -185,38 +186,38 @@
 
 		led@1 {
 			label = "lswvl:red:alarm";
-			gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@2 {
 			label = "lswvl:red:func";
-			gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@3 {
 			label = "lswvl:amber:info";
-			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@4 {
 			label = "lswvl:blue:func";
-			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@5 {
 			label = "lswvl:blue:power";
-			gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
 		led@6 {
 			label = "lswvl:red:hdderr0";
-			gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@7 {
 			label = "lswvl:red:hdderr1";
-			gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -233,7 +234,7 @@
 				3250 1
 				5000 0>;
 
-		alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
 
 	restart_poweroff {

arch/arm/boot/dts/kirkwood-lswxl.dts

@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
  *
- * Copyright (C) 2015, rogershimizu@gmail.com
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -156,21 +157,21 @@
 		button@1 {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
 		button@2 {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
 		button@3 {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -185,12 +186,12 @@
 
 		led@1 {
 			label = "lswxl:blue:func";
-			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
 		led@2 {
 			label = "lswxl:red:alarm";
-			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
 
 		led@3 {
@@ -200,23 +201,23 @@
 
 		led@4 {
 			label = "lswxl:blue:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 
 		led@5 {
 			label = "lswxl:red:func";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@6 {
 			label = "lswxl:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@7 {
 			label = "lswxl:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -225,15 +226,15 @@
 		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
 		pinctrl-names = "default";
 
-		gpios = <&gpio0 47 GPIO_ACTIVE_LOW
-			 &gpio0 48 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
 		gpio-fan,speed-map = <0 3
 				1500 2
 				3250 1
 				5000 0>;
 
-		alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
 	restart_poweroff {
@@ -256,7 +257,7 @@
 			enable-active-high;
 			regulator-always-on;
 			regulator-boot-on;
-			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 		hdd_power0: regulator@2 {
 			compatible = "regulator-fixed";

arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts

@@ -131,6 +131,7 @@
 	chip-delay = <40>;
 	status = "okay";
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -112,14 +112,6 @@
 	clock-frequency = <400000>;
 };
 
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
 /*
  * Only found on the wireless SOM. For the SOM without wireless, the pins for
  * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
@@ -143,6 +135,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };
 

arch/arm/boot/dts/ls1021a.dtsi

@@ -457,6 +457,18 @@
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		ptp_clock@2d10e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x0 0x2d10e00 0x0 0xb0>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc    = <2>;
+			fsl,tmr-add     = <0xaaaaaaab>;
+			fsl,tmr-fiper1  = <999999990>;
+			fsl,tmr-fiper2  = <99990>;
+			fsl,max-adj     = <499999999>;
+		};
+
 		enet0: ethernet@2d10000 {
 			compatible = "fsl,etsec2";
 			device_type = "network";

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -130,6 +130,16 @@
 	};
 };
 
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
 &omap5_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
@@ -213,6 +223,13 @@
 		>;
 	};
 
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
 	usbhost_pins: pinmux_usbhost_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@@ -278,6 +295,12 @@
 			&usbhost_wkup_pins
 	>;
 
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@@ -345,6 +368,8 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
@@ -358,6 +383,14 @@
 			#clock-cells = <0>;
 		};
 
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;

arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts

@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WTGL
  *
- * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -69,8 +70,6 @@
 
 		internal-regs {
 			pinctrl: pinctrl@10000 {
-				pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
-					&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
 				pinctrl-names = "default";
 
 				pmx_led_power: pmx-leds {
@@ -162,6 +161,7 @@
 		led@1 {
 			label = "lswtgl:blue:power";
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
 		};
 
 		led@2 {
@@ -188,7 +188,7 @@
 				3250 1
 				5000 0>;
 
-		alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	};
 
 	restart_poweroff {

arch/arm/boot/dts/sama5d4.dtsi

@@ -1342,7 +1342,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -127,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@@ -802,10 +794,21 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;

arch/arm/common/icst.c

@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);
@@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)

arch/arm/configs/multi_v7_defconfig

@@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y

arch/arm/configs/omap2plus_defconfig

@@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_KERNMEM_PERMS=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_ARM_ERRATA_430973=y
 CONFIG_SMP=y
@@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y
 CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
@@ -290,24 +292,23 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP5_DSS_HDMI=y
+CONFIG_FB_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_FB_OMAP2_ENCODER_TFP410=m
+CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
+CONFIG_FB_OMAP2_CONNECTOR_DVI=m
+CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
+CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
+CONFIG_FB_OMAP2_PANEL_DPI=m
+CONFIG_FB_OMAP2_PANEL_DSI_CM=m
+CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
+CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
+CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
@@ -354,6 +355,11 @@ CONFIG_USB_MUSB_DSPS=m
 CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_TEST=m
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=m
@@ -387,6 +393,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -449,6 +456,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_SPLIT=y
+CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y

arch/arm/crypto/aes-ce-glue.c

@@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_blkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ce_aes_setkey,
 		.encrypt	= ecb_encrypt,
 		.decrypt	= ecb_decrypt,
@@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_ablkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ablk_set_key,
 		.encrypt	= ablk_encrypt,
 		.decrypt	= ablk_decrypt,

arch/arm/mach-omap2/devices.c

@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -66,32 +65,6 @@ static int __init omap3_l3_init(void)
 }
 omap_postcore_initcall(omap3_l3_init);
 
-#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
-static inline void __init omap_init_mbox(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	struct omap_mbox_pdata *pdata;
-
-	oh = omap_hwmod_lookup("mailbox");
-	if (!oh) {
-		pr_err("%s: unable to find hwmod\n", __func__);
-		return;
-	}
-	if (!oh->dev_attr) {
-		pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
-		return;
-	}
-
-	pdata = (struct omap_mbox_pdata *)oh->dev_attr;
-	pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
-	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
-						__func__, PTR_ERR(pdev));
-}
-#else
-static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP2PLUS_MBOX */
-
 static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
@@ -229,7 +202,6 @@ static int __init omap2_init_devices(void)
 		 * please keep these calls, and their implementations above,
 		 * in alphabetical order so they're easier to sort through.
 		 */
-		omap_init_mbox();
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();

arch/arm/mach-omap2/pdata-quirks.c

@@ -23,6 +23,8 @@
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
+#include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <plat/dmtimer.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }
 
+/* Dual mode timer PWM callbacks platdata */
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.write_counter = omap_dm_timer_write_counter,
+};
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
 		       &wkup_m3_data),
 #endif
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
+#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
 		       &omap4_iommu_pdata),

arch/arm/mach-omap2/sleep34xx.S

@@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
+	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	ldr	r2, [r3]		@ value for offset
+	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
-	.text
-/* Function to call rom code to save secure ram context */
+/*
+ * Function to call rom code to save secure ram context. This gets
+ * relocated to SRAM, so it can be all in .data section. Otherwise
+ * we need to initialize api_params separately.
+ */
+	.data
 	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
@@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
+	.text
+
 /*
  * ======================
  * == Idle entry point ==
@@ -289,12 +296,6 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -302,11 +303,7 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bne	exit_nonoff_modes	@ Return if locked
 	/* wait till dll locks */
-	adr	r7, kick_counter
 wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -330,9 +327,6 @@ kick_dll:
 	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
 exit_nonoff_modes:
@@ -360,15 +354,6 @@ sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi
 
@@ -437,7 +422,9 @@ ENTRY(omap3_restore)
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
 	bne	logic_l1_restore
 
-	ldr	r0, l2dis_3630
+	adr	r1, l2dis_3630_offset	@ address for offset
+	ldr	r0, [r1]		@ value for offset
+	ldr	r0, [r1, r0]		@ value at l2dis_3630
 	cmp	r0, #0x1	@ should we disable L2 on 3630?
 	bne	skipl2dis
 	mrc	p15, 0, r0, c1, c0, 1
@@ -449,12 +436,14 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
+	adr	r0, l2_inv_api_params_offset
+	ldr	r3, [r0]
+	add	r3, r3, r0		@ r3 points to dummy parameters
 	mov	r0, #40			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	dsb				@ data write barrier
 	dmb				@ data memory barrier
 	smc	#1			@ call SMI monitor (smi #1)
@@ -488,8 +477,8 @@ skipl2dis:
 	b	logic_l1_restore
 
 	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
+l2_inv_api_params_offset:
+	.long	l2_inv_api_params - .
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
@@ -506,7 +495,9 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	ldr	r1, l2dis_3630
+	adr	r0, l2dis_3630_offset	@ adress for offset
+	ldr	r1, [r0]		@ value for offset
+	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
@@ -535,9 +526,17 @@ control_stat:
 	.word	CONTROL_STAT
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630_offset:
+	.long	l2dis_3630 - .
+
+	.data
 l2dis_3630:
 	.word	0
 
+	.data
+l2_inv_api_params:
+	.word	0x1, 0x00
+
 /*
  * Internal functions
  */

arch/arm/mach-omap2/sleep44xx.S

@@ -29,12 +29,6 @@
 	dsb
 .endm
 
-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
 #ifdef CONFIG_ARCH_OMAP4
 
 /*
@@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
 	beq	skip_ns_smp_enable
 ppa_actrl_retry:
 	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
+	adr	r1, ppa_zero_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_zero_params
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
 	mov	r6, #0xff
@@ -303,7 +299,9 @@ skip_ns_smp_enable:
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
+	adr     r1, ppa_por_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
@@ -328,6 +326,8 @@ skip_l2en:
 #endif
 
 	b	cpu_resume			@ Jump to generic resume
+ppa_por_params_offset:
+	.long	ppa_por_params - .
 ENDPROC(omap4_cpu_resume)
 #endif	/* CONFIG_ARCH_OMAP4 */
 
@@ -380,4 +380,13 @@ ENTRY(omap_do_wfi)
 	nop
 
 	ldmfd	sp!, {pc}
+ppa_zero_params_offset:
+	.long	ppa_zero_params - .
 ENDPROC(omap_do_wfi)
+
+	.data
+ppa_zero_params:
+	.word		0
+
+ppa_por_params:
+	.word		1, 0

arch/arm/mach-realview/Kconfig

@@ -1,5 +1,6 @@
 menuconfig ARCH_REALVIEW
-	bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	bool "ARM Ltd. RealView family"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE

arch/arm/mach-realview/platsmp-dt.c

@@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		     virt_to_phys(versatile_secondary_startup));
 }
 
-struct smp_operations realview_dt_smp_ops __initdata = {
+static const struct smp_operations realview_dt_smp_ops __initconst = {
 	.smp_prepare_cpus	= realview_smp_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
 	.smp_boot_secondary	= versatile_boot_secondary,

arch/arm/mach-tango/Kconfig

@@ -1,5 +1,6 @@
 config ARCH_TANGO
-	bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7
+	bool "Sigma Designs Tango4 (SMP87xx)"
+	depends on ARCH_MULTI_V7
 	# Cortex-A9 MPCore r3p0, PL310 r3p2
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARM_ERRATA_754322

arch/arm/mach-tango/platsmp.c

@@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-static struct smp_operations tango_smp_ops __initdata = {
+static const struct smp_operations tango_smp_ops __initconst = {
 	.smp_boot_secondary	= tango_boot_secondary,
 };
 

arch/arm/mach-tegra/board-paz00.c

@@ -17,23 +17,25 @@
  *
  */
 
+#include <linux/property.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
-#include <linux/rfkill-gpio.h>
 
 #include "board.h"
 
-static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
-	.name	= "wifi_rfkill",
-	.type	= RFKILL_TYPE_WLAN,
+static struct property_entry __initdata wifi_rfkill_prop[] = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	{ },
+};
+
+static struct property_set __initdata wifi_rfkill_pset = {
+	.properties = wifi_rfkill_prop,
 };
 
 static struct platform_device wifi_rfkill_device = {
 	.name	= "rfkill_gpio",
 	.id	= -1,
-	.dev	= {
-		.platform_data = &wifi_rfkill_platform_data,
-	},
 };
 
 static struct gpiod_lookup_table wifi_gpio_lookup = {
@@ -47,6 +49,7 @@ static struct gpiod_lookup_table wifi_gpio_lookup = {
 
 void __init tegra_paz00_wifikill_init(void)
 {
+	platform_device_add_properties(&wifi_rfkill_device, &wifi_rfkill_pset);
 	gpiod_add_lookup_table(&wifi_gpio_lookup);
 	platform_device_register(&wifi_rfkill_device);
 }

arch/arm64/Makefile

@@ -88,7 +88,7 @@ Image: vmlinux
 Image.%: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-zinstall install: vmlinux
+zinstall install:
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
 %.dtb: scripts

arch/arm64/boot/Makefile

@@ -34,10 +34,10 @@ $(obj)/Image.lzma: $(obj)/Image FORCE
 $(obj)/Image.lzo: $(obj)/Image FORCE
 	$(call if_changed,lzo)
 
-install: $(obj)/Image
+install:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/Image.gz
+zinstall:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image.gz System.map "$(INSTALL_PATH)"

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -115,6 +115,7 @@
 			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/nvidia/tegra132-norrin.dts

@@ -12,6 +12,8 @@
 		rtc1 = "/rtc@0,7000e000";
 	};
 
+	chosen { };
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;

arch/arm64/boot/install.sh

@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi

arch/arm64/crypto/aes-glue.c

@@ -294,7 +294,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_blkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= aes_setkey,
 		.encrypt	= ecb_encrypt,
 		.decrypt	= ecb_decrypt,
@@ -371,7 +371,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_ablkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ablk_set_key,
 		.encrypt	= ablk_encrypt,
 		.decrypt	= ablk_decrypt,

arch/arm64/include/asm/arch_gicv3.h

@@ -103,6 +103,7 @@ static inline u64 gic_read_iar_common(void)
 	u64 irqstat;
 
 	asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }
 

arch/arm64/include/asm/futex.h

@@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 "	prfm	pstl1strm, %2\n"
 "1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
@@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "	.align	3\n"
 "	.quad	1b, 4b, 2b, 4b\n"
 "	.popsection\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
 	: "memory");

arch/arm64/include/asm/kvm_arm.h

@@ -107,8 +107,6 @@
 #define TCR_EL2_MASK	(TCR_EL2_TG0 | TCR_EL2_SH0 | \
 			 TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ)
 
-#define TCR_EL2_FLAGS	(TCR_EL2_RES1 | TCR_EL2_PS_40B)
-
 /* VTCR_EL2 Registers bits */
 #define VTCR_EL2_RES1		(1 << 31)
 #define VTCR_EL2_PS_MASK	(7 << 16)
@@ -182,6 +180,7 @@
 #define CPTR_EL2_TCPAC	(1 << 31)
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
+#define CPTR_EL2_DEFAULT	0x000033ff
 
 /* Hyp Debug Configuration Register bits */
 #define MDCR_EL2_TDRA		(1 << 11)

arch/arm64/include/asm/kvm_emulate.h

@@ -127,10 +127,14 @@ static inline unsigned long *vcpu_spsr(const struct kvm_vcpu *vcpu)
 
 static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
 {
-	u32 mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
+	u32 mode;
 
-	if (vcpu_mode_is_32bit(vcpu))
+	if (vcpu_mode_is_32bit(vcpu)) {
+		mode = *vcpu_cpsr(vcpu) & COMPAT_PSR_MODE_MASK;
 		return mode > COMPAT_PSR_MODE_USR;
+	}
+
+	mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
 
 	return mode != PSR_MODE_EL0t;
 }

arch/arm64/include/asm/page.h

@@ -39,6 +39,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/personality.h> /* for READ_IMPLIES_EXEC */
 #include <asm/pgtable-types.h>
 
 extern void __cpu_clear_user_page(void *p, unsigned long user);

arch/arm64/kernel/debug-monitors.c

@@ -226,11 +226,28 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr)
 	return retval;
 }
 
+static void send_user_sigtrap(int si_code)
+{
+	struct pt_regs *regs = current_pt_regs();
+	siginfo_t info = {
+		.si_signo	= SIGTRAP,
+		.si_errno	= 0,
+		.si_code	= si_code,
+		.si_addr	= (void __user *)instruction_pointer(regs),
+	};
+
+	if (WARN_ON(!user_mode(regs)))
+		return;
+
+	if (interrupts_enabled(regs))
+		local_irq_enable();
+
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static int single_step_handler(unsigned long addr, unsigned int esr,
 			       struct pt_regs *regs)
 {
-	siginfo_t info;
-
 	/*
 	 * If we are stepping a pending breakpoint, call the hw_breakpoint
 	 * handler first.
@@ -239,11 +256,7 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
 		return 0;
 
 	if (user_mode(regs)) {
-		info.si_signo = SIGTRAP;
-		info.si_errno = 0;
-		info.si_code  = TRAP_HWBKPT;
-		info.si_addr  = (void __user *)instruction_pointer(regs);
-		force_sig_info(SIGTRAP, &info, current);
+		send_user_sigtrap(TRAP_HWBKPT);
 
 		/*
 		 * ptrace will disable single step unless explicitly
@@ -307,17 +320,8 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
 static int brk_handler(unsigned long addr, unsigned int esr,
 		       struct pt_regs *regs)
 {
-	siginfo_t info;
-
 	if (user_mode(regs)) {
-		info = (siginfo_t) {
-			.si_signo = SIGTRAP,
-			.si_errno = 0,
-			.si_code  = TRAP_BRKPT,
-			.si_addr  = (void __user *)instruction_pointer(regs),
-		};
-
-		force_sig_info(SIGTRAP, &info, current);
+		send_user_sigtrap(TRAP_BRKPT);
 	} else if (call_break_hook(regs, esr) != DBG_HOOK_HANDLED) {
 		pr_warning("Unexpected kernel BRK exception at EL1\n");
 		return -EFAULT;
@@ -328,7 +332,6 @@ static int brk_handler(unsigned long addr, unsigned int esr,
 
 int aarch32_break_handler(struct pt_regs *regs)
 {
-	siginfo_t info;
 	u32 arm_instr;
 	u16 thumb_instr;
 	bool bp = false;
@@ -359,14 +362,7 @@ int aarch32_break_handler(struct pt_regs *regs)
 	if (!bp)
 		return -EFAULT;
 
-	info = (siginfo_t) {
-		.si_signo = SIGTRAP,
-		.si_errno = 0,
-		.si_code  = TRAP_BRKPT,
-		.si_addr  = pc,
-	};
-
-	force_sig_info(SIGTRAP, &info, current);
+	send_user_sigtrap(TRAP_BRKPT);
 	return 0;
 }
 

arch/arm64/kernel/image.h

@@ -89,6 +89,7 @@ __efistub_memcpy		= KALLSYMS_HIDE(__pi_memcpy);
 __efistub_memmove		= KALLSYMS_HIDE(__pi_memmove);
 __efistub_memset		= KALLSYMS_HIDE(__pi_memset);
 __efistub_strlen		= KALLSYMS_HIDE(__pi_strlen);
+__efistub_strnlen		= KALLSYMS_HIDE(__pi_strnlen);
 __efistub_strcmp		= KALLSYMS_HIDE(__pi_strcmp);
 __efistub_strncmp		= KALLSYMS_HIDE(__pi_strncmp);
 __efistub___flush_dcache_area	= KALLSYMS_HIDE(__pi___flush_dcache_area);

arch/arm64/kernel/stacktrace.c

@@ -44,14 +44,13 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 	unsigned long irq_stack_ptr;
 
 	/*
-	 * Use raw_smp_processor_id() to avoid false-positives from
-	 * CONFIG_DEBUG_PREEMPT. get_wchan() calls unwind_frame() on sleeping
-	 * task stacks, we can be pre-empted in this case, so
-	 * {raw_,}smp_processor_id() may give us the wrong value. Sleeping
-	 * tasks can't ever be on an interrupt stack, so regardless of cpu,
-	 * the checks will always fail.
+	 * Switching between stacks is valid when tracing current and in
+	 * non-preemptible context.
 	 */
-	irq_stack_ptr = IRQ_STACK_PTR(raw_smp_processor_id());
+	if (tsk == current && !preemptible())
+		irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
+	else
+		irq_stack_ptr = 0;
 
 	low  = frame->sp;
 	/* irq stacks are not THREAD_SIZE aligned */
@@ -64,8 +63,8 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 		return -EINVAL;
 
 	frame->sp = fp + 0x10;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = *(unsigned long *)(fp + 8);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (tsk && tsk->ret_stack &&

arch/arm64/kernel/traps.c

@@ -146,9 +146,18 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 {
 	struct stackframe frame;
-	unsigned long irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
+	unsigned long irq_stack_ptr;
 	int skip;
 
+	/*
+	 * Switching between stacks is valid when tracing current and in
+	 * non-preemptible context.
+	 */
+	if (tsk == current && !preemptible())
+		irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
+	else
+		irq_stack_ptr = 0;
+
 	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
 
 	if (!tsk)

arch/arm64/kvm/hyp-init.S

@@ -64,7 +64,7 @@ __do_hyp_init:
 	mrs	x4, tcr_el1
 	ldr	x5, =TCR_EL2_MASK
 	and	x4, x4, x5
-	ldr	x5, =TCR_EL2_FLAGS
+	mov	x5, #TCR_EL2_RES1
 	orr	x4, x4, x5
 
 #ifndef CONFIG_ARM64_VA_BITS_48
@@ -85,15 +85,17 @@ __do_hyp_init:
 	ldr_l	x5, idmap_t0sz
 	bfi	x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
 #endif
-	msr	tcr_el2, x4
-
-	ldr	x4, =VTCR_EL2_FLAGS
 	/*
 	 * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
-	 * VTCR_EL2.
+	 * TCR_EL2 and VTCR_EL2.
 	 */
 	mrs	x5, ID_AA64MMFR0_EL1
 	bfi	x4, x5, #16, #3
+
+	msr	tcr_el2, x4
+
+	ldr	x4, =VTCR_EL2_FLAGS
+	bfi	x4, x5, #16, #3
 	/*
 	 * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS bit in
 	 * VTCR_EL2.

arch/arm64/kvm/hyp/switch.c

@@ -36,7 +36,11 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
 	write_sysreg(val, hcr_el2);
 	/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
 	write_sysreg(1 << 15, hstr_el2);
-	write_sysreg(CPTR_EL2_TTA | CPTR_EL2_TFP, cptr_el2);
+
+	val = CPTR_EL2_DEFAULT;
+	val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
+	write_sysreg(val, cptr_el2);
+
 	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 }
 
@@ -45,7 +49,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
 	write_sysreg(HCR_RW, hcr_el2);
 	write_sysreg(0, hstr_el2);
 	write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2);
-	write_sysreg(0, cptr_el2);
+	write_sysreg(CPTR_EL2_DEFAULT, cptr_el2);
 }
 
 static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)

arch/arm64/kvm/inject_fault.c

@@ -27,7 +27,11 @@
 
 #define PSTATE_FAULT_BITS_64 	(PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \
 				 PSR_I_BIT | PSR_D_BIT)
-#define EL1_EXCEPT_SYNC_OFFSET	0x200
+
+#define CURRENT_EL_SP_EL0_VECTOR	0x0
+#define CURRENT_EL_SP_ELx_VECTOR	0x200
+#define LOWER_EL_AArch64_VECTOR		0x400
+#define LOWER_EL_AArch32_VECTOR		0x600
 
 static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
 {
@@ -97,6 +101,34 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt,
 		*fsr = 0x14;
 }
 
+enum exception_type {
+	except_type_sync	= 0,
+	except_type_irq		= 0x80,
+	except_type_fiq		= 0x100,
+	except_type_serror	= 0x180,
+};
+
+static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type)
+{
+	u64 exc_offset;
+
+	switch (*vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT)) {
+	case PSR_MODE_EL1t:
+		exc_offset = CURRENT_EL_SP_EL0_VECTOR;
+		break;
+	case PSR_MODE_EL1h:
+		exc_offset = CURRENT_EL_SP_ELx_VECTOR;
+		break;
+	case PSR_MODE_EL0t:
+		exc_offset = LOWER_EL_AArch64_VECTOR;
+		break;
+	default:
+		exc_offset = LOWER_EL_AArch32_VECTOR;
+	}
+
+	return vcpu_sys_reg(vcpu, VBAR_EL1) + exc_offset + type;
+}
+
 static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
 {
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
@@ -108,8 +140,8 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 	*vcpu_spsr(vcpu) = cpsr;
 	*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);
 
+	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
-	*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;
 
 	vcpu_sys_reg(vcpu, FAR_EL1) = addr;
 
@@ -143,8 +175,8 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 	*vcpu_spsr(vcpu) = cpsr;
 	*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);
 
+	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
-	*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;
 
 	/*
 	 * Build an unknown exception, depending on the instruction

arch/arm64/kvm/sys_regs.c

@@ -1007,10 +1007,9 @@ static int emulate_cp(struct kvm_vcpu *vcpu,
 		if (likely(r->access(vcpu, params, r))) {
 			/* Skip instruction, since it was emulated */
 			kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+			/* Handled */
+			return 0;
 		}
-
-		/* Handled */
-		return 0;
 	}
 
 	/* Not handled */
@@ -1043,7 +1042,7 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu,
 }
 
 /**
- * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access
  * @vcpu: The VCPU pointer
  * @run:  The kvm_run struct
  */
@@ -1095,7 +1094,7 @@ out:
 }
 
 /**
- * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access
  * @vcpu: The VCPU pointer
  * @run:  The kvm_run struct
  */

arch/arm64/lib/strnlen.S

@@ -168,4 +168,4 @@ CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
 .Lhit_limit:
 	mov	len, limit
 	ret
-ENDPROC(strnlen)
+ENDPIPROC(strnlen)

arch/arm64/mm/dma-mapping.c

@@ -933,6 +933,10 @@ static int __init __iommu_dma_init(void)
 		ret = register_iommu_dma_ops_notifier(&platform_bus_type);
 	if (!ret)
 		ret = register_iommu_dma_ops_notifier(&amba_bustype);
+
+	/* handle devices queued before this arch_initcall */
+	if (!ret)
+		__iommu_attach_notifier(NULL, BUS_NOTIFY_ADD_DEVICE, NULL);
 	return ret;
 }
 arch_initcall(__iommu_dma_init);

arch/arm64/mm/fault.c

@@ -371,6 +371,13 @@ static int __kprobes do_translation_fault(unsigned long addr,
 	return 0;
 }
 
+static int do_alignment_fault(unsigned long addr, unsigned int esr,
+			      struct pt_regs *regs)
+{
+	do_bad_area(addr, esr, regs);
+	return 0;
+}
+
 /*
  * This abort handler always returns "fault".
  */
@@ -418,7 +425,7 @@ static struct fault_info {
 	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk)" },
 	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk)" },
 	{ do_bad,		SIGBUS,  0,		"unknown 32"			},
-	{ do_bad,		SIGBUS,  BUS_ADRALN,	"alignment fault"		},
+	{ do_alignment_fault,	SIGBUS,  BUS_ADRALN,	"alignment fault"		},
 	{ do_bad,		SIGBUS,  0,		"unknown 34"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 35"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 36"			},

arch/arm64/mm/pageattr.c

@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
@@ -44,6 +45,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	unsigned long end = start + size;
 	int ret;
 	struct page_change_data data;
+	struct vm_struct *area;
 
 	if (!PAGE_ALIGNED(addr)) {
 		start &= PAGE_MASK;
@@ -51,10 +53,23 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
-	if (start < MODULES_VADDR || start >= MODULES_END)
-		return -EINVAL;
-
-	if (end < MODULES_VADDR || end >= MODULES_END)
+	/*
+	 * Kernel VA mappings are always live, and splitting live section
+	 * mappings into page mappings may cause TLB conflicts. This means
+	 * we have to ensure that changing the permission bits of the range
+	 * we are operating on does not result in such splitting.
+	 *
+	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
+	 * Those are guaranteed to consist entirely of page mappings, and
+	 * splitting is never needed.
+	 *
+	 * So check whether the [addr, addr + size) interval is entirely
+	 * covered by precisely one VM area that has the VM_ALLOC flag set.
+	 */
+	area = find_vm_area((void *)addr);
+	if (!area ||
+	    end > (unsigned long)area->addr + area->size ||
+	    !(area->flags & VM_ALLOC))
 		return -EINVAL;
 
 	if (!numpages)

arch/avr32/include/uapi/asm/socket.h

@@ -88,4 +88,6 @@
 #define SO_ATTACH_REUSEPORT_CBPF	51
 #define SO_ATTACH_REUSEPORT_EBPF	52
 
+#define SO_CNX_ADVICE		53
+
 #endif /* _UAPI__ASM_AVR32_SOCKET_H */