staging: fbtft: Use standard MIPI DCS command defines for ili9481

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fbtft/fb_ili9481.c

@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -29,7 +30,7 @@
 static int default_init_sequence[] = {
 
 	/* SLP_OUT - Sleep out */
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 50,
 	/* Power setting */
 	-1, 0xD0, 0x07, 0x42, 0x18,
@@ -42,25 +43,24 @@ static int default_init_sequence[] = {
 	/* Frame rate & inv. */
 	-1, 0xC5, 0x03,
 	/* Pixel format */
-	-1, 0x3A, 0x55,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
 	/* Gamma */
 	-1, 0xC8, 0x00, 0x32, 0x36, 0x45, 0x06, 0x16,
 		  0x37, 0x75, 0x77, 0x54, 0x0C, 0x00,
 	/* DISP_ON */
-	-1, 0x29,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
 	-3
 };
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* column address */
-	write_reg(par, 0x2a, xs >> 8, xs & 0xff, xe >> 8, xe & 0xff);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xff, xe >> 8, xe & 0xff);
 
-	/* Row address */
-	write_reg(par, 0x2b, ys >> 8, ys & 0xff, ye >> 8, ye & 0xff);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xff, ye >> 8, ye & 0xff);
 
-	/* memory write */
-	write_reg(par, 0x2c);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define HFLIP 0x01
@@ -70,16 +70,20 @@ static int set_var(struct fbtft_par *par)
 {
 	switch (par->info->var.rotate) {
 	case 270:
-		write_reg(par, 0x36, ROWxCOL | HFLIP | VFLIP | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  ROWxCOL | HFLIP | VFLIP | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, VFLIP | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  VFLIP | (par->bgr << 3));
 		break;
 	case 90:
-		write_reg(par, 0x36, ROWxCOL | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  ROWxCOL | (par->bgr << 3));
 		break;
 	default:
-		write_reg(par, 0x36, HFLIP | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  HFLIP | (par->bgr << 3));
 		break;
 	}