Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.  No new drivers here,
  just some driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: rotary-encoder - fix bare use of 'unsigned'
  Input: cm109 - spin_lock in complete() cleanup
  Input: cm109 - fix handling of volume and mute buttons
  Input: byd - don't wipe dynamically allocated memory twice
  Input: twl4030 - fix unsafe macro definition
  Input: twl6040-vibra - remove mutex
  Input: bcm_iproc_tsc - DT spelling s/clock-name/clock-names/
  Input: bcm_iproc_tsc - use syscon to access shared registers
  Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPS
  Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val()
  Input: omap-keypad - drop empty PM stubs
  Input: omap-keypad - remove adjusting of scan delay
  Input: gpio-keys - clean up device tree binding example
  Input: kbtab - stop saving struct usb_device
  Input: gtco - stop saving struct usb_device
  Input: aiptek - stop saving struct usb_device
  Input: acecad - stop saving struct usb_device

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -32,17 +32,17 @@ Optional subnode-properties:
 
 Example nodes:
 
-	gpio_keys {
+	gpio-keys {
 			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			autorepeat;
-			button@21 {
+
+			up {
 				label = "GPIO Key UP";
 				linux,code = <103>;
 				gpios = <&gpio1 0 1>;
 			};
-			button@22 {
+
+			down {
 				label = "GPIO Key DOWN";
 				linux,code = <108>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;

Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt

@@ -2,11 +2,17 @@
 
 Required properties:
 - compatible: must be "brcm,iproc-touchscreen"
-- reg: physical base address of the controller and length of memory mapped
-  region.
+- ts_syscon: handler of syscon node defining physical base
+  address of the controller and length of memory mapped region.
+  If this property is selected please make sure MFD_SYSCON config
+  is enabled in the defconfig file.
 - clocks:  The clock provided by the SOC to driver the tsc
-- clock-name:  name for the clock
+- clock-names:  name for the clock
 - interrupts: The touchscreen controller's interrupt
+- address-cells: Specify the number of u32 entries needed in child nodes.
+  Should set to 1.
+- size-cells: Specify number of u32 entries needed to specify child nodes size
+  in reg property. Should set to 1.
 
 Optional properties:
 - scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
@@ -53,13 +59,18 @@ Optional properties:
 - touchscreen-inverted-x: X axis is inverted (boolean)
 - touchscreen-inverted-y: Y axis is inverted (boolean)
 
-Example:
+Example: An example of touchscreen node
 
-	touchscreen: tsc@0x180A6000 {
+	ts_adc_syscon: ts_adc_syscon@180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	touchscreen: touchscreen@180A6000 {
 		compatible = "brcm,iproc-touchscreen";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x180A6000 0x40>;
+		ts_syscon = <&ts_adc_syscon>;
 		clocks = <&adc_clk>;
 		clock-names = "tsc_clk";
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/bcm-cygnus.dtsi

@@ -351,9 +351,16 @@
 					<&pinctrl 142 10 1>;
 		};
 
-		touchscreen: tsc@180a6000 {
+		ts_adc_syscon: ts_adc_syscon@180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen@180a6000 {
 			compatible = "brcm,iproc-touchscreen";
-			reg = <0x180a6000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
 			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
 			clock-names = "tsc_clk";
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;

drivers/input/keyboard/omap-keypad.c

@@ -64,31 +64,6 @@ static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
 static unsigned int *row_gpios;
 static unsigned int *col_gpios;
 
-#ifdef CONFIG_ARCH_OMAP2
-static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
-{
-	int col;
-
-	for (col = 0; col < omap_kp->cols; col++)
-		gpio_set_value(col_gpios[col], value & (1 << col));
-}
-
-static u8 get_row_gpio_val(struct omap_kp *omap_kp)
-{
-	int row;
-	u8 value = 0;
-
-	for (row = 0; row < omap_kp->rows; row++) {
-		if (gpio_get_value(row_gpios[row]))
-			value |= (1 << row);
-	}
-	return value;
-}
-#else
-#define		set_col_gpio_val(x, y)	do {} while (0)
-#define		get_row_gpio_val(x)	0
-#endif
-
 static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 {
 	/* disable keyboard interrupt and schedule for handling */
@@ -133,7 +108,6 @@ static void omap_kp_tasklet(unsigned long data)
 	unsigned int row_shift = get_count_order(omap_kp_data->cols);
 	unsigned char new_state[8], changed, key_down = 0;
 	int col, row;
-	int spurious = 0;
 
 	/* check for any changes */
 	omap_kp_scan_keypad(omap_kp_data, new_state);
@@ -170,12 +144,9 @@ static void omap_kp_tasklet(unsigned long data)
 	memcpy(keypad_state, new_state, sizeof(keypad_state));
 
 	if (key_down) {
-		int delay = HZ / 20;
 		/* some key is pressed - keep irq disabled and use timer
 		 * to poll the keypad */
-		if (spurious)
-			delay = 2 * HZ;
-		mod_timer(&omap_kp_data->timer, jiffies + delay);
+		mod_timer(&omap_kp_data->timer, jiffies + HZ / 20);
 	} else {
 		/* enable interrupts */
 		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
@@ -216,25 +187,6 @@ static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute
 
 static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store);
 
-#ifdef CONFIG_PM
-static int omap_kp_suspend(struct platform_device *dev, pm_message_t state)
-{
-	/* Nothing yet */
-
-	return 0;
-}
-
-static int omap_kp_resume(struct platform_device *dev)
-{
-	/* Nothing yet */
-
-	return 0;
-}
-#else
-#define omap_kp_suspend	NULL
-#define omap_kp_resume	NULL
-#endif
-
 static int omap_kp_probe(struct platform_device *pdev)
 {
 	struct omap_kp *omap_kp;
@@ -371,8 +323,6 @@ static int omap_kp_remove(struct platform_device *pdev)
 static struct platform_driver omap_kp_driver = {
 	.probe		= omap_kp_probe,
 	.remove		= omap_kp_remove,
-	.suspend	= omap_kp_suspend,
-	.resume		= omap_kp_resume,
 	.driver		= {
 		.name	= "omap-keypad",
 	},

drivers/input/keyboard/twl4030_keypad.c

@@ -61,9 +61,9 @@ struct twl4030_keypad {
 	unsigned short	keymap[TWL4030_KEYMAP_SIZE];
 	u16		kp_state[TWL4030_MAX_ROWS];
 	bool		autorepeat;
-	unsigned	n_rows;
-	unsigned	n_cols;
-	unsigned	irq;
+	unsigned int	n_rows;
+	unsigned int	n_cols;
+	unsigned int	irq;
 
 	struct device *dbg_dev;
 	struct input_dev *input;
@@ -110,7 +110,7 @@ struct twl4030_keypad {
 #define KEYP_CTRL_KBD_ON		BIT(6)
 
 /* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/
-#define KEYP_PERIOD_US(t, prescale)	((t) / (31 << (prescale + 1)) - 1)
+#define KEYP_PERIOD_US(t, prescale)	((t) / (31 << ((prescale) + 1)) - 1)
 
 /* KEYP_LK_PTV_REG Fields */
 #define KEYP_LK_PTV_PTV_SHIFT		5
@@ -162,9 +162,10 @@ static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg)
 
 static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col)
 {
-	/* If all bits in a row are active for all coloumns then
+	/*
+	 * If all bits in a row are active for all columns then
 	 * we have that row line connected to gnd. Mark this
-	 * key on as if it was on matrix position n_cols (ie
+	 * key on as if it was on matrix position n_cols (i.e.
 	 * one higher than the size of the matrix).
 	 */
 	if (col == 0xFF)
@@ -209,9 +210,9 @@ static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
 	u16 new_state[TWL4030_MAX_ROWS];
 	int col, row;
 
-	if (release_all)
+	if (release_all) {
 		memset(new_state, 0, sizeof(new_state));
-	else {
+	} else {
 		/* check for any changes */
 		int ret = twl4030_read_kp_matrix_state(kp, new_state);
 
@@ -262,8 +263,10 @@ static irqreturn_t do_kp_irq(int irq, void *_kp)
 	/* Read & Clear TWL4030 pending interrupt */
 	ret = twl4030_kpread(kp, &reg, KEYP_ISR1, 1);
 
-	/* Release all keys if I2C has gone bad or
-	 * the KEYP has gone to idle state */
+	/*
+	 * Release all keys if I2C has gone bad or
+	 * the KEYP has gone to idle state.
+	 */
 	if (ret >= 0 && (reg & KEYP_IMR1_KP))
 		twl4030_kp_scan(kp, false);
 	else
@@ -283,7 +286,8 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
 	if (twl4030_kpwrite_u8(kp, reg, KEYP_CTRL) < 0)
 		return -EIO;
 
-	/* NOTE:  we could use sih_setup() here to package keypad
+	/*
+	 * NOTE: we could use sih_setup() here to package keypad
 	 * event sources as four different IRQs ... but we don't.
 	 */
 
@@ -312,7 +316,7 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
 
 	/*
 	 * Enable Clear-on-Read; disable remembering events that fire
-	 * after the IRQ but before our handler acks (reads) them,
+	 * after the IRQ but before our handler acks (reads) them.
 	 */
 	reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK;
 	if (twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL) < 0)

drivers/input/misc/cm109.c

@@ -76,8 +76,8 @@ enum {
 
 	BUZZER_ON = 1 << 5,
 
-	/* up to 256 normal keys, up to 16 special keys */
-	KEYMAP_SIZE = 256 + 16,
+	/* up to 256 normal keys, up to 15 special key combinations */
+	KEYMAP_SIZE = 256 + 15,
 };
 
 /* CM109 protocol packet */
@@ -139,7 +139,7 @@ static unsigned short special_keymap(int code)
 {
 	if (code > 0xff) {
 		switch (code - 0xff) {
-		case RECORD_MUTE:	return KEY_MUTE;
+		case RECORD_MUTE:	return KEY_MICMUTE;
 		case PLAYBACK_MUTE:	return KEY_MUTE;
 		case VOLUME_DOWN:	return KEY_VOLUMEDOWN;
 		case VOLUME_UP:		return KEY_VOLUMEUP;
@@ -312,6 +312,32 @@ static void report_key(struct cm109_dev *dev, int key)
 	input_sync(idev);
 }
 
+/*
+ * Converts data of special key presses (volume, mute) into events
+ * for the input subsystem, sends press-n-release for mute keys.
+ */
+static void cm109_report_special(struct cm109_dev *dev)
+{
+	static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE;
+	struct input_dev *idev = dev->idev;
+	u8 data = dev->irq_data->byte[HID_IR0];
+	unsigned short keycode;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		keycode = dev->keymap[0xff + BIT(i)];
+		if (keycode == KEY_RESERVED)
+			continue;
+
+		input_report_key(idev, keycode, data & BIT(i));
+		if (data & autorelease & BIT(i)) {
+			input_sync(idev);
+			input_report_key(idev, keycode, 0);
+		}
+	}
+	input_sync(idev);
+}
+
 /******************************************************************************
  * CM109 usb communication interface
  *****************************************************************************/
@@ -340,6 +366,7 @@ static void cm109_urb_irq_callback(struct urb *urb)
 	struct cm109_dev *dev = urb->context;
 	const int status = urb->status;
 	int error;
+	unsigned long flags;
 
 	dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
 	     dev->irq_data->byte[0],
@@ -357,10 +384,7 @@ static void cm109_urb_irq_callback(struct urb *urb)
 	}
 
 	/* Special keys */
-	if (dev->irq_data->byte[HID_IR0] & 0x0f) {
-		const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
-		report_key(dev, dev->keymap[0xff + code]);
-	}
+	cm109_report_special(dev);
 
 	/* Scan key column */
 	if (dev->keybit == 0xf) {
@@ -381,7 +405,7 @@ static void cm109_urb_irq_callback(struct urb *urb)
 
  out:
 
-	spin_lock(&dev->ctl_submit_lock);
+	spin_lock_irqsave(&dev->ctl_submit_lock, flags);
 
 	dev->irq_urb_pending = 0;
 
@@ -405,7 +429,7 @@ static void cm109_urb_irq_callback(struct urb *urb)
 				__func__, error);
 	}
 
-	spin_unlock(&dev->ctl_submit_lock);
+	spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
 }
 
 static void cm109_urb_ctl_callback(struct urb *urb)
@@ -413,6 +437,7 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 	struct cm109_dev *dev = urb->context;
 	const int status = urb->status;
 	int error;
+	unsigned long flags;
 
 	dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
 	     dev->ctl_data->byte[0],
@@ -427,7 +452,7 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 				    __func__, status);
 	}
 
-	spin_lock(&dev->ctl_submit_lock);
+	spin_lock_irqsave(&dev->ctl_submit_lock, flags);
 
 	dev->ctl_urb_pending = 0;
 
@@ -448,7 +473,7 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 		}
 	}
 
-	spin_unlock(&dev->ctl_submit_lock);
+	spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
 }
 
 static void cm109_toggle_buzzer_async(struct cm109_dev *dev)

drivers/input/misc/rotary_encoder.c

@@ -47,13 +47,13 @@ struct rotary_encoder {
 	bool armed;
 	signed char dir;	/* 1 - clockwise, -1 - CCW */
 
-	unsigned last_stable;
+	unsigned int last_stable;
 };
 
-static unsigned rotary_encoder_get_state(struct rotary_encoder *encoder)
+static unsigned int rotary_encoder_get_state(struct rotary_encoder *encoder)
 {
 	int i;
-	unsigned ret = 0;
+	unsigned int ret = 0;
 
 	for (i = 0; i < encoder->gpios->ndescs; ++i) {
 		int val = gpiod_get_value_cansleep(encoder->gpios->desc[i]);
@@ -100,7 +100,7 @@ static void rotary_encoder_report_event(struct rotary_encoder *encoder)
 static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
 {
 	struct rotary_encoder *encoder = dev_id;
-	unsigned state;
+	unsigned int state;
 
 	mutex_lock(&encoder->access_mutex);
 

drivers/input/misc/twl6040-vibra.c

@@ -46,7 +46,7 @@ struct vibra_info {
 	struct device *dev;
 	struct input_dev *input_dev;
 	struct work_struct play_work;
-	struct mutex mutex;
+
 	int irq;
 
 	bool enabled;
@@ -190,8 +190,6 @@ static void vibra_play_work(struct work_struct *work)
 		return;
 	}
 
-	mutex_lock(&info->mutex);
-
 	if (info->weak_speed || info->strong_speed) {
 		if (!info->enabled)
 			twl6040_vibra_enable(info);
@@ -200,7 +198,6 @@ static void vibra_play_work(struct work_struct *work)
 	} else if (info->enabled)
 		twl6040_vibra_disable(info);
 
-	mutex_unlock(&info->mutex);
 }
 
 static int vibra_play(struct input_dev *input, void *data,
@@ -223,12 +220,8 @@ static void twl6040_vibra_close(struct input_dev *input)
 
 	cancel_work_sync(&info->play_work);
 
-	mutex_lock(&info->mutex);
-
 	if (info->enabled)
 		twl6040_vibra_disable(info);
-
-	mutex_unlock(&info->mutex);
 }
 
 static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
@@ -236,13 +229,11 @@ static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct vibra_info *info = platform_get_drvdata(pdev);
 
-	mutex_lock(&info->mutex);
+	cancel_work_sync(&info->play_work);
 
 	if (info->enabled)
 		twl6040_vibra_disable(info);
 
-	mutex_unlock(&info->mutex);
-
 	return 0;
 }
 
@@ -301,8 +292,6 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	mutex_init(&info->mutex);
-
 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
 					  twl6040_vib_irq_handler,
 					  IRQF_ONESHOT,

drivers/input/mouse/byd.c

@@ -478,7 +478,6 @@ int byd_init(struct psmouse *psmouse)
 	if (!priv)
 		return -ENOMEM;
 
-	memset(priv, 0, sizeof(*priv));
 	setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse);
 
 	psmouse->private = priv;

drivers/input/tablet/acecad.c

@@ -49,7 +49,6 @@ MODULE_LICENSE(DRIVER_LICENSE);
 struct usb_acecad {
 	char name[128];
 	char phys[64];
-	struct usb_device *usbdev;
 	struct usb_interface *intf;
 	struct input_dev *input;
 	struct urb *irq;
@@ -64,6 +63,7 @@ static void usb_acecad_irq(struct urb *urb)
 	unsigned char *data = acecad->data;
 	struct input_dev *dev = acecad->input;
 	struct usb_interface *intf = acecad->intf;
+	struct usb_device *udev = interface_to_usbdev(intf);
 	int prox, status;
 
 	switch (urb->status) {
@@ -110,15 +110,15 @@ resubmit:
 	if (status)
 		dev_err(&intf->dev,
 			"can't resubmit intr, %s-%s/input0, status %d\n",
-			acecad->usbdev->bus->bus_name,
-			acecad->usbdev->devpath, status);
+			udev->bus->bus_name,
+			udev->devpath, status);
 }
 
 static int usb_acecad_open(struct input_dev *dev)
 {
 	struct usb_acecad *acecad = input_get_drvdata(dev);
 
-	acecad->irq->dev = acecad->usbdev;
+	acecad->irq->dev = interface_to_usbdev(acecad->intf);
 	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
 		return -EIO;
 
@@ -172,7 +172,6 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 		goto fail2;
 	}
 
-	acecad->usbdev = dev;
 	acecad->intf = intf;
 	acecad->input = input_dev;
 
@@ -251,12 +250,13 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 static void usb_acecad_disconnect(struct usb_interface *intf)
 {
 	struct usb_acecad *acecad = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
 
 	usb_set_intfdata(intf, NULL);
 
 	input_unregister_device(acecad->input);
 	usb_free_urb(acecad->irq);
-	usb_free_coherent(acecad->usbdev, 8, acecad->data, acecad->data_dma);
+	usb_free_coherent(udev, 8, acecad->data, acecad->data_dma);
 	kfree(acecad);
 }
 

drivers/input/tablet/aiptek.c

@@ -307,7 +307,6 @@ struct aiptek_settings {
 
 struct aiptek {
 	struct input_dev *inputdev;		/* input device struct           */
-	struct usb_device *usbdev;		/* usb device struct             */
 	struct usb_interface *intf;		/* usb interface struct          */
 	struct urb *urb;			/* urb for incoming reports      */
 	dma_addr_t data_dma;			/* our dma stuffage              */
@@ -847,7 +846,7 @@ static int aiptek_open(struct input_dev *inputdev)
 {
 	struct aiptek *aiptek = input_get_drvdata(inputdev);
 
-	aiptek->urb->dev = aiptek->usbdev;
+	aiptek->urb->dev = interface_to_usbdev(aiptek->intf);
 	if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
 		return -EIO;
 
@@ -873,8 +872,10 @@ aiptek_set_report(struct aiptek *aiptek,
 		  unsigned char report_type,
 		  unsigned char report_id, void *buffer, int size)
 {
-	return usb_control_msg(aiptek->usbdev,
-			       usb_sndctrlpipe(aiptek->usbdev, 0),
+	struct usb_device *udev = interface_to_usbdev(aiptek->intf);
+
+	return usb_control_msg(udev,
+			       usb_sndctrlpipe(udev, 0),
 			       USB_REQ_SET_REPORT,
 			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
 			       USB_DIR_OUT, (report_type << 8) + report_id,
@@ -886,8 +887,10 @@ aiptek_get_report(struct aiptek *aiptek,
 		  unsigned char report_type,
 		  unsigned char report_id, void *buffer, int size)
 {
-	return usb_control_msg(aiptek->usbdev,
-			       usb_rcvctrlpipe(aiptek->usbdev, 0),
+	struct usb_device *udev = interface_to_usbdev(aiptek->intf);
+
+	return usb_control_msg(udev,
+			       usb_rcvctrlpipe(udev, 0),
 			       USB_REQ_GET_REPORT,
 			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
 			       USB_DIR_IN, (report_type << 8) + report_id,
@@ -1729,7 +1732,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	}
 
 	aiptek->inputdev = inputdev;
-	aiptek->usbdev = usbdev;
 	aiptek->intf = intf;
 	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
 	aiptek->inDelay = 0;
@@ -1833,8 +1835,8 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	 * input.
 	 */
 	usb_fill_int_urb(aiptek->urb,
-			 aiptek->usbdev,
-			 usb_rcvintpipe(aiptek->usbdev,
+			 usbdev,
+			 usb_rcvintpipe(usbdev,
 					endpoint->bEndpointAddress),
 			 aiptek->data, 8, aiptek_irq, aiptek,
 			 endpoint->bInterval);

drivers/input/tablet/gtco.c

@@ -104,7 +104,6 @@ MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
 struct gtco {
 
 	struct input_dev  *inputdevice; /* input device struct pointer  */
-	struct usb_device *usbdev; /* the usb device for this device */
 	struct usb_interface *intf;	/* the usb interface for this device */
 	struct urb        *urbinfo;	 /* urb for incoming reports      */
 	dma_addr_t        buf_dma;  /* dma addr of the data buffer*/
@@ -540,7 +539,7 @@ static int gtco_input_open(struct input_dev *inputdev)
 {
 	struct gtco *device = input_get_drvdata(inputdev);
 
-	device->urbinfo->dev = device->usbdev;
+	device->urbinfo->dev = interface_to_usbdev(device->intf);
 	if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
 		return -EIO;
 
@@ -824,6 +823,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	int                     result = 0, retry;
 	int			error;
 	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device	*udev = interface_to_usbdev(usbinterface);
 
 	/* Allocate memory for device structure */
 	gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
@@ -838,11 +838,10 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	gtco->inputdevice = input_dev;
 
 	/* Save interface information */
-	gtco->usbdev = interface_to_usbdev(usbinterface);
 	gtco->intf = usbinterface;
 
 	/* Allocate some data for incoming reports */
-	gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+	gtco->buffer = usb_alloc_coherent(udev, REPORT_MAX_SIZE,
 					  GFP_KERNEL, &gtco->buf_dma);
 	if (!gtco->buffer) {
 		dev_err(&usbinterface->dev, "No more memory for us buffers\n");
@@ -907,8 +906,8 @@ static int gtco_probe(struct usb_interface *usbinterface,
 
 	/* Couple of tries to get reply */
 	for (retry = 0; retry < 3; retry++) {
-		result = usb_control_msg(gtco->usbdev,
-					 usb_rcvctrlpipe(gtco->usbdev, 0),
+		result = usb_control_msg(udev,
+					 usb_rcvctrlpipe(udev, 0),
 					 USB_REQ_GET_DESCRIPTOR,
 					 USB_RECIP_INTERFACE | USB_DIR_IN,
 					 REPORT_DEVICE_TYPE << 8,
@@ -936,7 +935,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	}
 
 	/* Create a device file node */
-	usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
+	usb_make_path(udev, gtco->usbpath, sizeof(gtco->usbpath));
 	strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
 
 	/* Set Input device functions */
@@ -953,15 +952,15 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	gtco_setup_caps(input_dev);
 
 	/* Set input device required ID information */
-	usb_to_input_id(gtco->usbdev, &input_dev->id);
+	usb_to_input_id(udev, &input_dev->id);
 	input_dev->dev.parent = &usbinterface->dev;
 
 	/* Setup the URB, it will be posted later on open of input device */
 	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
 
 	usb_fill_int_urb(gtco->urbinfo,
-			 gtco->usbdev,
-			 usb_rcvintpipe(gtco->usbdev,
+			 udev,
+			 usb_rcvintpipe(udev,
 					endpoint->bEndpointAddress),
 			 gtco->buffer,
 			 REPORT_MAX_SIZE,
@@ -985,7 +984,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
  err_free_urb:
 	usb_free_urb(gtco->urbinfo);
  err_free_buf:
-	usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+	usb_free_coherent(udev, REPORT_MAX_SIZE,
 			  gtco->buffer, gtco->buf_dma);
  err_free_devs:
 	input_free_device(input_dev);
@@ -1002,13 +1001,14 @@ static void gtco_disconnect(struct usb_interface *interface)
 {
 	/* Grab private device ptr */
 	struct gtco *gtco = usb_get_intfdata(interface);
+	struct usb_device *udev = interface_to_usbdev(interface);
 
 	/* Now reverse all the registration stuff */
 	if (gtco) {
 		input_unregister_device(gtco->inputdevice);
 		usb_kill_urb(gtco->urbinfo);
 		usb_free_urb(gtco->urbinfo);
-		usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+		usb_free_coherent(udev, REPORT_MAX_SIZE,
 				  gtco->buffer, gtco->buf_dma);
 		kfree(gtco);
 	}

drivers/input/tablet/kbtab.c

@@ -31,7 +31,6 @@ struct kbtab {
 	unsigned char *data;
 	dma_addr_t data_dma;
 	struct input_dev *dev;
-	struct usb_device *usbdev;
 	struct usb_interface *intf;
 	struct urb *irq;
 	char phys[32];
@@ -99,8 +98,9 @@ MODULE_DEVICE_TABLE(usb, kbtab_ids);
 static int kbtab_open(struct input_dev *dev)
 {
 	struct kbtab *kbtab = input_get_drvdata(dev);
+	struct usb_device *udev = interface_to_usbdev(kbtab->intf);
 
-	kbtab->irq->dev = kbtab->usbdev;
+	kbtab->irq->dev = udev;
 	if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
 		return -EIO;
 
@@ -135,7 +135,6 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (!kbtab->irq)
 		goto fail2;
 
-	kbtab->usbdev = dev;
 	kbtab->intf = intf;
 	kbtab->dev = input_dev;
 
@@ -188,12 +187,13 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 static void kbtab_disconnect(struct usb_interface *intf)
 {
 	struct kbtab *kbtab = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
 
 	usb_set_intfdata(intf, NULL);
 
 	input_unregister_device(kbtab->dev);
 	usb_free_urb(kbtab->irq);
-	usb_free_coherent(kbtab->usbdev, 8, kbtab->data, kbtab->data_dma);
+	usb_free_coherent(udev, 8, kbtab->data, kbtab->data_dma);
 	kfree(kbtab);
 }
 

drivers/input/touchscreen/bcm_iproc_tsc.c

@@ -23,6 +23,8 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/serio.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define IPROC_TS_NAME "iproc-ts"
 
@@ -88,7 +90,11 @@
 #define TS_WIRE_MODE_BIT        BIT(1)
 
 #define dbg_reg(dev, priv, reg) \
-	dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+do { \
+	u32 val; \
+	regmap_read(priv->regmap, reg, &val); \
+	dev_dbg(dev, "%20s= 0x%08x\n", #reg, val); \
+} while (0)
 
 struct tsc_param {
 	/* Each step is 1024 us.  Valid 1-256 */
@@ -141,7 +147,7 @@ struct iproc_ts_priv {
 	struct platform_device *pdev;
 	struct input_dev *idev;
 
-	void __iomem *regs;
+	struct regmap *regmap;
 	struct clk *tsc_clk;
 
 	int  pen_status;
@@ -196,22 +202,22 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 	int i;
 	bool needs_sync = false;
 
-	intr_status = readl(priv->regs + INTERRUPT_STATUS);
+	regmap_read(priv->regmap, INTERRUPT_STATUS, &intr_status);
 	intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
 	if (intr_status == 0)
 		return IRQ_NONE;
 
 	/* Clear all interrupt status bits, write-1-clear */
-	writel(intr_status, priv->regs + INTERRUPT_STATUS);
-
+	regmap_write(priv->regmap, INTERRUPT_STATUS, intr_status);
 	/* Pen up/down */
 	if (intr_status & TS_PEN_INTR_MASK) {
-		if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+		regmap_read(priv->regmap, CONTROLLER_STATUS, &priv->pen_status);
+		if (priv->pen_status & TS_PEN_DOWN)
 			priv->pen_status = PEN_DOWN_STATUS;
 		else
 			priv->pen_status = PEN_UP_STATUS;
 
-		input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+		input_report_key(priv->idev, BTN_TOUCH,	priv->pen_status);
 		needs_sync = true;
 
 		dev_dbg(&priv->pdev->dev,
@@ -221,7 +227,7 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 	/* coordinates in FIFO exceed the theshold */
 	if (intr_status & TS_FIFO_INTR_MASK) {
 		for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
-			raw_coordinate = readl(priv->regs + FIFO_DATA);
+			regmap_read(priv->regmap, FIFO_DATA, &raw_coordinate);
 			if (raw_coordinate == INVALID_COORD)
 				continue;
 
@@ -239,7 +245,7 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 			x = (x >> 4) & 0x0FFF;
 			y = (y >> 4) & 0x0FFF;
 
-			/* adjust x y according to lcd tsc mount angle */
+			/* Adjust x y according to LCD tsc mount angle. */
 			if (priv->cfg_params.invert_x)
 				x = priv->cfg_params.max_x - x;
 
@@ -262,9 +268,10 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 
 static int iproc_ts_start(struct input_dev *idev)
 {
-	struct iproc_ts_priv *priv = input_get_drvdata(idev);
 	u32 val;
+	u32 mask;
 	int error;
+	struct iproc_ts_priv *priv = input_get_drvdata(idev);
 
 	/* Enable clock */
 	error = clk_prepare_enable(priv->tsc_clk);
@@ -279,9 +286,10 @@ static int iproc_ts_start(struct input_dev *idev)
 	 *  FIFO reaches the int_th value, and pen event(up/down)
 	 */
 	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
-	writel(val, priv->regs + INTERRUPT_MASK);
+	regmap_update_bits(priv->regmap, INTERRUPT_MASK, val, val);
 
-	writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+	val = priv->cfg_params.fifo_threshold;
+	regmap_write(priv->regmap, INTERRUPT_THRES, val);
 
 	/* Initialize control reg1 */
 	val = 0;
@@ -289,26 +297,23 @@ static int iproc_ts_start(struct input_dev *idev)
 	val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
 	val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
 	val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
-	writel(val, priv->regs + REGCTL1);
+	regmap_write(priv->regmap, REGCTL1, val);
 
 	/* Try to clear all interrupt status */
-	val = readl(priv->regs + INTERRUPT_STATUS);
-	val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
-	writel(val, priv->regs + INTERRUPT_STATUS);
+	val = TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+	regmap_update_bits(priv->regmap, INTERRUPT_STATUS, val, val);
 
 	/* Initialize control reg2 */
-	val = readl(priv->regs + REGCTL2);
-	val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
-
-	val &= ~TS_CONTROLLER_AVGDATA_MASK;
+	val = TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
 	val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
 
-	val &= ~(TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
+	mask = (TS_CONTROLLER_AVGDATA_MASK);
+	mask |= (TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
 		   TS_CONTROLLER_PWR_ADC |	/* PWR up ADC */
 		   TS_CONTROLLER_PWR_BGP |	/* PWR up BGP */
 		   TS_CONTROLLER_PWR_TS);	/* PWR up TS */
-
-	writel(val, priv->regs + REGCTL2);
+	mask |= val;
+	regmap_update_bits(priv->regmap, REGCTL2, mask, val);
 
 	ts_reg_dump(priv);
 
@@ -320,12 +325,17 @@ static void iproc_ts_stop(struct input_dev *dev)
 	u32 val;
 	struct iproc_ts_priv *priv = input_get_drvdata(dev);
 
-	writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+	/*
+	 * Disable FIFO int_th and pen event(up/down)Interrupts only
+	 * as the interrupt mask register is shared between ADC, TS and
+	 * flextimer.
+	 */
+	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	regmap_update_bits(priv->regmap, INTERRUPT_MASK, val, 0);
 
 	/* Only power down touch screen controller */
-	val = readl(priv->regs + REGCTL2);
-	val |= TS_CONTROLLER_PWR_TS;
-	writel(val, priv->regs + REGCTL2);
+	val = TS_CONTROLLER_PWR_TS;
+	regmap_update_bits(priv->regmap, REGCTL2, val, val);
 
 	clk_disable(priv->tsc_clk);
 }
@@ -414,7 +424,6 @@ static int iproc_ts_probe(struct platform_device *pdev)
 {
 	struct iproc_ts_priv *priv;
 	struct input_dev *idev;
-	struct resource *res;
 	int irq;
 	int error;
 
@@ -422,12 +431,12 @@ static int iproc_ts_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	/* touchscreen controller memory mapped regs */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(priv->regs)) {
-		error = PTR_ERR(priv->regs);
-		dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+	/* touchscreen controller memory mapped regs via syscon*/
+	priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"ts_syscon");
+	if (IS_ERR(priv->regmap)) {
+		error = PTR_ERR(priv->regmap);
+		dev_err(&pdev->dev, "unable to map I/O memory:%d\n", error);
 		return error;
 	}
 

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -487,8 +487,7 @@ static int titsc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int titsc_suspend(struct device *dev)
+static int __maybe_unused titsc_suspend(struct device *dev)
 {
 	struct titsc *ts_dev = dev_get_drvdata(dev);
 	struct ti_tscadc_dev *tscadc_dev;
@@ -504,7 +503,7 @@ static int titsc_suspend(struct device *dev)
 	return 0;
 }
 
-static int titsc_resume(struct device *dev)
+static int __maybe_unused titsc_resume(struct device *dev)
 {
 	struct titsc *ts_dev = dev_get_drvdata(dev);
 	struct ti_tscadc_dev *tscadc_dev;
@@ -521,14 +520,7 @@ static int titsc_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops titsc_pm_ops = {
-	.suspend = titsc_suspend,
-	.resume  = titsc_resume,
-};
-#define TITSC_PM_OPS (&titsc_pm_ops)
-#else
-#define TITSC_PM_OPS NULL
-#endif
+static SIMPLE_DEV_PM_OPS(titsc_pm_ops, titsc_suspend, titsc_resume);
 
 static const struct of_device_id ti_tsc_dt_ids[] = {
 	{ .compatible = "ti,am3359-tsc", },
@@ -541,7 +533,7 @@ static struct platform_driver ti_tsc_driver = {
 	.remove	= titsc_remove,
 	.driver	= {
 		.name   = "TI-am335x-tsc",
-		.pm	= TITSC_PM_OPS,
+		.pm	= &titsc_pm_ops,
 		.of_match_table = ti_tsc_dt_ids,
 	},
 };