staging: wilc1000: remove unnecessary header file inclusion for wilc

Remove the unnecessary file inclusion in the source code. Also follow
the convension to first include the system header then project specific
header files.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/wilc1000/coreconfigurator.c

@@ -1,9 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "coreconfigurator.h"
-#include "wilc_wlan_if.h"
-#include "wilc_wlan.h"
-#include <linux/errno.h>
-#include <linux/slab.h>
+
 #define TAG_PARAM_OFFSET	(MAC_HDR_LEN + TIME_STAMP_LEN + \
 				 BEACON_INTERVAL_LEN + CAP_INFO_LEN)
 

drivers/staging/wilc1000/host_interface.c

@@ -1,18 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/kthread.h>
-#include <linux/delay.h>
-#include <linux/completion.h>
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include "host_interface.h"
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include "coreconfigurator.h"
-#include "wilc_wlan.h"
-#include "wilc_wlan_if.h"
-#include <linux/etherdevice.h>
 #include "wilc_wfi_netdevice.h"
 
 #define HOST_IF_MSG_SCAN                        0

drivers/staging/wilc1000/linux_mon.c

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "wilc_wfi_cfgoperations.h"
-#include "wilc_wlan_if.h"
-#include "wilc_wlan.h"
 
 struct wilc_wfi_radiotap_hdr {
 	struct ieee80211_radiotap_header hdr;

drivers/staging/wilc1000/linux_wlan.c

@@ -1,28 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "wilc_wfi_cfgoperations.h"
-#include "wilc_wlan_if.h"
-#include "wilc_wlan.h"
-
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-
 #include <linux/kthread.h>
 #include <linux/firmware.h>
-
-#include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/inetdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
+
+#include "wilc_wfi_cfgoperations.h"
 
 bool wilc_enable_ps = true;
 

drivers/staging/wilc1000/wilc_debugfs.c

@@ -13,8 +13,6 @@
 #if defined(WILC_DEBUGFS)
 #include <linux/module.h>
 #include <linux/debugfs.h>
-#include <linux/poll.h>
-#include <linux/sched.h>
 
 #include "wilc_wlan_if.h"
 

drivers/staging/wilc1000/wilc_sdio.c

@@ -5,17 +5,11 @@
  * Module Name:  wilc_sdio.c
  */
 
-#include <linux/string.h>
-#include "wilc_wlan_if.h"
-#include "wilc_wlan.h"
-#include "wilc_wfi_netdevice.h"
 #include <linux/mmc/sdio_func.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/mmc/sdio.h>
-#include <linux/mmc/host.h>
 #include <linux/of_gpio.h>
 
+#include "wilc_wfi_netdevice.h"
+
 #define SDIO_MODALIAS "wilc1000_sdio"
 
 #define SDIO_VENDOR_ID_WILC 0x0296

drivers/staging/wilc1000/wilc_spi.c

@@ -5,21 +5,9 @@
  * Module Name:  wilc_spi.c
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/cdev.h>
-#include <linux/uaccess.h>
-#include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/of_gpio.h>
 
-#include <linux/string.h>
-#include "wilc_wlan_if.h"
-#include "wilc_wlan.h"
 #include "wilc_wfi_netdevice.h"
 
 struct wilc_spi {

drivers/staging/wilc1000/wilc_wfi_cfgoperations.c

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "wilc_wfi_cfgoperations.h"
-#include "host_interface.h"
-#include <linux/errno.h>
 
 #define NO_ENCRYPT		0
 #define ENCRYPT_ENABLED		BIT(0)

drivers/staging/wilc1000/wilc_wfi_netdevice.h

@@ -7,33 +7,14 @@
 #define PMKID_FOUND 1
  #define NUM_STA_ASSOCIATED 8
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
 #include <linux/tcp.h>
-#include <linux/skbuff.h>
 #include <linux/ieee80211.h>
 #include <net/cfg80211.h>
 #include <net/ieee80211_radiotap.h>
 #include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <asm/checksum.h>
+
 #include "host_interface.h"
 #include "wilc_wlan.h"
-#include <linux/wireless.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
 
 #define FLOW_CONTROL_LOWER_THRESHOLD	128
 #define FLOW_CONTROL_UPPER_THRESHOLD	256

drivers/staging/wilc1000/wilc_wlan.c

@@ -1,7 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/completion.h>
-#include "wilc_wlan_if.h"
-#include "wilc_wlan.h"
 #include "wilc_wfi_netdevice.h"
 #include "wilc_wlan_cfg.h"
 

drivers/staging/wilc1000/wilc_wlan_cfg.c

@@ -8,7 +8,6 @@
 /*  */
 /* ///////////////////////////////////////////////////////////////////////// */
 
-#include <linux/string.h>
 #include "wilc_wlan_if.h"
 #include "wilc_wlan.h"
 #include "wilc_wlan_cfg.h"