Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dt

* 'dt' of git://github.com/hzhuang1/linux:
  Documentation: update docs for mmp dt
  ARM: dts: refresh dts file for arch mmp
  ARM: mmp: support pxa910 with device tree
  ARM: mmp: support mmp2 with device tree
  gpio: pxa: parse gpio from DTS file
  ARM: mmp: support DT in timer
  ARM: mmp: support DT in irq
  ARM: mmp: append CONFIG_MACH_MMP2_DT
  ARM: mmp: fix build issue on mmp with device tree

Includes an update to v3-4-rc5

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/ABI/testing/sysfs-bus-hsi

@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

Documentation/devicetree/bindings/arm/mrvl/intc.txt

@@ -0,0 +1,40 @@
+* Marvell MMP Interrupt controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
+  "mrvl,mmp2-mux-intc"
+- reg : Address and length of the register set of the interrupt controller.
+  If the interrupt controller is intc, address and length means the range
+  of the whold interrupt controller. If the interrupt controller is mux-intc,
+  address and length means one register. Since address of mux-intc is in the
+  range of intc. mux-intc is secondary interrupt controller.
+- reg-names : Name of the register set of the interrupt controller. It's
+  only required in mux-intc interrupt controller.
+- interrupts : Should be the port interrupt shared by mux interrupts. It's
+  only required in mux-intc interrupt controller.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.
+- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
+  controller.
+- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
+  detection first.
+
+Example:
+	intc: interrupt-controller@d4282000 {
+		compatible = "mrvl,mmp2-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xd4282000 0x1000>;
+		mrvl,intc-nr-irqs = <64>;
+	};
+
+	intcmux4@d4282150 {
+		compatible = "mrvl,mmp2-mux-intc";
+		interrupts = <4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x150 0x4>, <0x168 0x4>;
+		reg-names = "mux status", "mux mask";
+		mrvl,intc-nr-irqs = <2>;
+	};

Documentation/devicetree/bindings/arm/mrvl.txt → Documentation/devicetree/bindings/arm/mrvl/mrvl.txt

@@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings
 PXA168 Aspenite Board
 Required root node properties:
 	- compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+PXA910 DKB Board
+Required root node properties:
+	- compatible = "mrvl,pxa910-dkb";
+
+MMP2 Brownstone Board
+Required root node properties:
+	- compatible = "mrvl,mmp2-brownstone";

Documentation/devicetree/bindings/arm/mrvl/timer.txt

@@ -0,0 +1,13 @@
+* Marvell MMP Timer controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-timer".
+- reg : Address and length of the register set of timer controller.
+- interrupts : Should be the interrupt number.
+
+Example:
+	timer0: timer@d4014000 {
+		compatible = "mrvl,mmp-timer";
+		reg = <0xd4014000 0x100>;
+		interrupts = <13>;
+	};

Documentation/devicetree/bindings/gpio/mrvl-gpio.txt

@@ -3,19 +3,25 @@
 Required properties:
 - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
 - reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins, if
-- interrupt-name : Should be the name of irq resource.
-  one number.
+- interrupts : Should be the port interrupt shared by all gpio pins.
+  There're three gpio interrupts in arch-pxa, and they're gpio0,
+  gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
+  gpio_mux.
+- interrupt-name : Should be the name of irq resource. Each interrupt
+  binds its interrupt-name.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source.
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be one.  It is the pin number.
 
 Example:
 
 	gpio: gpio@d4019000 {
-		compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+		compatible = "mrvl,mmp-gpio";
 		reg = <0xd4019000 0x1000>;
-		interrupts = <49>, <17>, <18>;
-		interrupt-name = "gpio_mux", "gpio0", "gpio1";
+		interrupts = <49>;
+		interrupt-name = "gpio_mux";
 		gpio-controller;
 		#gpio-cells = <1>;
 		interrupt-controller;

Documentation/devicetree/bindings/i2c/mrvl-i2c.txt

@@ -3,34 +3,31 @@
 Required properties :
 
  - reg : Offset and length of the register set for the device
- - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+ - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
    compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
    For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
    as shown in the example below.
 
 Recommended properties :
 
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
+ - interrupts : the interrupt number
  - interrupt-parent : the phandle for the interrupt controller that
-   services interrupts for this device.
+   services interrupts for this device. If the parent is the default
+   interrupt controller in device tree, it could be ignored.
  - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
    status register of i2c controller instead.
  - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
 
 Examples:
 	twsi1: i2c@d4011000 {
-		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		compatible = "mrvl,mmp-twsi";
 		reg = <0xd4011000 0x1000>;
 		interrupts = <7>;
 		mrvl,i2c-fast-mode;
 	};
 	
 	twsi2: i2c@d4025000 {
-		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		compatible = "mrvl,mmp-twsi";
 		reg = <0xd4025000 0x1000>;
 		interrupts = <58>;
 	};

Documentation/power/freezing-of-tasks.txt

@@ -9,7 +9,7 @@ architectures).
 
 II. How does it work?
 
-There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
 PF_NOFREEZE unset (all user space processes and some kernel threads) are
 regarded as 'freezable' and treated in a special way before the system enters a
@@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows
 we only consider hibernation, but the description also applies to suspend).
 
 Namely, as the first step of the hibernation procedure the function
-freeze_processes() (defined in kernel/power/process.c) is called.  It executes
-try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
-either wakes them up, if they are kernel threads, or sends fake signals to them,
-if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called __refrigerator() (defined in
-kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
-to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
-Then, we say that the task is 'frozen' and therefore the set of functions
-handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
-User space processes are generally frozen before kernel threads.
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
-the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
-flag is set.
+if the task is to be frozen and makes the task enter __refrigerator().
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if TIF_FREEZE is set and calling
-try_to_freeze().  The main loop of a freezable kernel thread may look like the
-following one:
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one:
 
 	set_freezable();
 	do {
@@ -53,7 +54,7 @@ following one:
 (from drivers/usb/core/hub.c::hub_thread()).
 
 If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-set TIF_FREEZE for it, the freezing of tasks will fail and the entire
+initiated a freezing operation, the freezing of tasks will fail and the entire
 hibernation operation will be cancelled.  For this reason, freezable kernel
 threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.

Documentation/security/keys.txt

@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines two special key types:
+ (*) The key service defines three special key types:
 
      (+) "keyring"
 
@@ -137,6 +137,18 @@ The key service provides a number of features besides keys:
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
+     (+) "logon"
+
+	 Like a "user" key, a "logon" key has a payload that is an arbitrary
+	 blob of data. It is intended as a place to store secrets which are
+	 accessible to the kernel but not to userspace programs.
+
+	 The description can be arbitrary, but must be prefixed with a non-zero
+	 length string that describes the key "subclass". The subclass is
+	 separated from the rest of the description by a ':'. "logon" keys can
+	 be created and updated from userspace, but the payload is only
+	 readable from kernel space.
+
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 

MAINTAINERS

@@ -3592,6 +3592,7 @@ S:	Supported
 F:	drivers/net/wireless/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
+M:	Johannes Berg <johannes.berg@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -7578,8 +7579,8 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
-M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+M:	Anirudha Sarangi <anirudh@xilinx.com>
+M:	John Linn <John.Linn@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -633,6 +633,7 @@ config ARCH_MMP
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select IRQ_DOMAIN
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ

arch/arm/boot/dts/mmp2-brownstone.dts

@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Aspenite Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart3: uart@d4018000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/mmp2.dtsi

@@ -0,0 +1,220 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			uart1: uart@d4030000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			uart4: uart@d4016000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1 0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/msm8660-surf.dts

@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };

arch/arm/boot/dts/pxa168.dtsi

@@ -18,13 +18,6 @@
 		i2c1 = &twsi2;
 	};
 
-	intc: intc-interrupt-controller@d4282000 {
-		compatible = "mrvl,mmp-intc", "mrvl,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xd4282000 0x1000>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -32,6 +25,23 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
 		apb@d4000000 {	/* APB */
 			compatible = "mrvl,apb-bus", "simple-bus";
 			#address-cells = <1>;
@@ -39,40 +49,65 @@
 			reg = <0xd4000000 0x00200000>;
 			ranges;
 
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
 			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4017000 0x1000>;
 				interrupts = <27>;
 				status = "disabled";
 			};
 
 			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4018000 0x1000>;
 				interrupts = <28>;
 				status = "disabled";
 			};
 
 			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4026000 0x1000>;
 				interrupts = <29>;
 				status = "disabled";
 			};
 
-			gpio: gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
 				interrupts = <49>;
 				interrupt-names = "gpio_mux";
-				gpio-controller;
-				#gpio-cells = <1>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
 			};
 
 			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				mrvl,i2c-fast-mode;
@@ -80,7 +115,7 @@
 			};
 
 			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4025000 0x1000>;
 				interrupts = <58>;
 				status = "disabled";

arch/arm/boot/dts/pxa910-dkb.dts

@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart1: uart@d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/pxa910.dtsi

@@ -0,0 +1,140 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			timer1: timer@d4016000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4016000 0x100>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			uart1: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4036000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4036000 0x1000>;
+				interrupts = <59>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4037000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4037000 0x1000>;
+				interrupts = <54>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5 6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/configs/mini2440_defconfig

@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y

arch/arm/kernel/smp_twd.c

@@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
-	 *
-	 * Only wait for it to finish, if the cpu is active to avoid
-	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
-	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-					 NULL, cpu_active(freqs->cpu));
+			NULL, 1);
 
 	return NOTIFY_OK;
 }

arch/arm/mach-exynos/clock-exynos4.c

@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),

arch/arm/mach-exynos/clock-exynos5.c

@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),

arch/arm/mach-exynos/common.c

@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),

arch/arm/mach-exynos/dev-dwmci.c

@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {

arch/arm/mach-exynos/mach-nuri.c

@@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };

arch/arm/mach-exynos/mach-universal_c210.c

@@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };

arch/arm/mach-mmp/Kconfig

@@ -2,16 +2,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implmentations"
 
-config MACH_MMP_DT
-	bool "Support MMP2 platforms from device tree"
-	select CPU_PXA168
-	select CPU_PXA910
-	select USE_OF
-	help
-	  Include support for Marvell MMP2 based platforms using
-	  the device tree. Needn't select any other machine while
-	  MACH_MMP_DT is enabled.
-
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	select CPU_PXA168
@@ -94,6 +84,25 @@ config MACH_GPLUGD
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
 
+config MACH_MMP_DT
+	bool "Support MMP (ARMv5) platforms from device tree"
+	select CPU_PXA168
+	select CPU_PXA910
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
+config MACH_MMP2_DT
+	bool "Support MMP2 (ARMv7) platforms from device tree"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree.
+
 endmenu
 
 config CPU_PXA168

arch/arm/mach-mmp/Makefile

@@ -2,12 +2,12 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o time.o
+obj-y				+= common.o clock.o devices.o time.o irq.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o sram.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
@@ -19,5 +19,6 @@ obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
+obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
 obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o

arch/arm/mach-mmp/include/mach/entry-macro.S

@@ -6,13 +6,15 @@
  * published by the Free Software Foundation.
  */
 
+#include <asm/irq.h>
 #include <mach/regs-icu.h>
 
 	.macro	get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
 	and	\tmp, \tmp, #0xff00
 	cmp	\tmp, #0x5800
-	ldr	\base, =ICU_VIRT_BASE
+	ldr	\base, =mmp_icu_base
+	ldr	\base, [\base, #0]
 	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
 	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
 	.endm

arch/arm/mach-mmp/include/mach/irqs.h

@@ -125,7 +125,7 @@
 #define IRQ_MMP2_RTC_MUX		5
 #define IRQ_MMP2_TWSI1			7
 #define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD			9
+#define IRQ_MMP2_KEYPAD_MUX		9
 #define IRQ_MMP2_ROTARY			10
 #define IRQ_MMP2_TRACKBALL		11
 #define IRQ_MMP2_ONEWIRE		12
@@ -163,11 +163,11 @@
 #define IRQ_MMP2_DMA_FIQ		47
 #define IRQ_MMP2_DMA_RIQ		48
 #define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_SSP_MUX		51
+#define IRQ_MMP2_MIPI_HSI1_MUX		51
 #define IRQ_MMP2_MMC2			52
 #define IRQ_MMP2_MMC3			53
 #define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI		55
+#define IRQ_MMP2_MIPI_HSI0_MUX		55
 #define IRQ_MMP2_MSP			58
 #define IRQ_MMP2_MIPI_SLIM_DMA		59
 #define IRQ_MMP2_PJ4_FREQ_CHG		60
@@ -186,8 +186,14 @@
 #define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
 #define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
 
+/* secondary interrupt of INT #9 */
+#define IRQ_MMP2_KEYPAD_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_KPC			(IRQ_MMP2_KEYPAD_BASE + 0)
+#define IRQ_MMP2_ROTORY			(IRQ_MMP2_KEYPAD_BASE + 1)
+#define IRQ_MMP2_TBALL			(IRQ_MMP2_KEYPAD_BASE + 2)
+
 /* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_KEYPAD_BASE + 3)
 #define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
 #define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
 #define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
@@ -212,11 +218,16 @@
 #define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
 
 /* secondary interrupt of INT #51 */
-#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
-#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
+#define IRQ_MMP2_MIPI_HSI1_BASE		(IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_HSI1_CAWAKE		(IRQ_MMP2_MIPI_HSI1_BASE + 0)
+#define IRQ_MMP2_MIPI_HSI_INT1		(IRQ_MMP2_MIPI_HSI1_BASE + 1)
+
+/* secondary interrupt of INT #55 */
+#define IRQ_MMP2_MIPI_HSI0_BASE		(IRQ_MMP2_MIPI_HSI1_BASE + 2)
+#define IRQ_MMP2_HSI0_CAWAKE		(IRQ_MMP2_MIPI_HSI0_BASE + 0)
+#define IRQ_MMP2_MIPI_HSI_INT0		(IRQ_MMP2_MIPI_HSI0_BASE + 1)
 
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
+#define IRQ_MMP2_MUX_END		(IRQ_MMP2_MIPI_HSI0_BASE + 2)
 
 #define IRQ_GPIO_START			128
 #define MMP_NR_BUILTIN_GPIO		192

arch/arm/mach-mmp/irq-mmp2.c

@@ -1,158 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq-mmp2.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-icu.h>
-#include <mach/mmp2.h>
-
-#include "common.h"
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r |= ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_mask	= icu_mask_irq,
-	.irq_mask_ack	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-static void pmic_irq_ack(struct irq_data *d)
-{
-	if (d->irq == IRQ_MMP2_PMIC)
-		mmp2_clear_pmic_int();
-}
-
-#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
-static void _name_##_mask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) | (1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
-static void _name_##_unmask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) & ~(1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
-static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
-{									\
-	unsigned long status, mask, n;					\
-	mask = __raw_readl(prefix##_MASK);				\
-	while (1) {							\
-		status = __raw_readl(prefix##_STATUS) & ~mask;		\
-		if (status == 0)					\
-			break;						\
-		n = find_first_bit(&status, BITS_PER_LONG);		\
-		while (n < BITS_PER_LONG) {				\
-			generic_handle_irq(irq_base + n);		\
-			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
-		}							\
-	}								\
-}
-
-#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
-SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
-static struct irq_chip _name_##_irq_chip = {				\
-	.name		= #_name_,					\
-	.irq_mask	= _name_##_mask_irq,				\
-	.irq_unmask	= _name_##_unmask_irq,				\
-}
-
-SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
-SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
-SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
-SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
-SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
-
-static void init_mux_irq(struct irq_chip *chip, int start, int num)
-{
-	int irq;
-
-	for (irq = start; num > 0; irq++, num--) {
-		struct irq_data *d = irq_get_irq_data(irq);
-
-		/* mask and clear the IRQ */
-		chip->irq_mask(d);
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		irq_set_chip(irq, chip);
-		set_irq_flags(irq, IRQF_VALID);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
-void __init mmp2_init_icu(void)
-{
-	int irq;
-
-	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip(irq, &icu_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-
-		switch (irq) {
-		case IRQ_MMP2_PMIC_MUX:
-		case IRQ_MMP2_RTC_MUX:
-		case IRQ_MMP2_TWSI_MUX:
-		case IRQ_MMP2_MISC_MUX:
-		case IRQ_MMP2_SSP_MUX:
-			break;
-		default:
-			irq_set_handler(irq, handle_level_irq);
-			break;
-		}
-	}
-
-	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
-	 * to be written to clear the interrupt
-	 */
-	pmic_irq_chip.irq_ack = pmic_irq_ack;
-
-	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
-	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
-	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
-	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
-	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
-
-	irq_set_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
-}

arch/arm/mach-mmp/irq-pxa168.c

@@ -1,54 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Bin Yang <bin.yang@marvell.com>
- *  Created:	Sep 30, 2008
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/regs-icu.h>
-
-#include "common.h"
-
-#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
-
-#define PRIORITY_DEFAULT	0x1
-#define PRIORITY_NONE		0x0	/* means IRQ disabled */
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_ack	= icu_mask_irq,
-	.irq_mask	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-void __init icu_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < 64; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}

arch/arm/mach-mmp/irq.c

@@ -0,0 +1,445 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *  Copyright (C) 2008 - 2012 Marvell Technology Group Ltd.
+ *
+ *  Author:	Bin Yang <bin.yang@marvell.com>
+ *              Haojian Zhuang <haojian.zhuang@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <mach/irqs.h>
+
+#include "common.h"
+
+#define MAX_ICU_NR		16
+
+struct icu_chip_data {
+	int			nr_irqs;
+	unsigned int		virq_base;
+	unsigned int		cascade_irq;
+	void __iomem		*reg_status;
+	void __iomem		*reg_mask;
+	unsigned int		conf_enable;
+	unsigned int		conf_disable;
+	unsigned int		conf_mask;
+	unsigned int		clr_mfp_irq_base;
+	unsigned int		clr_mfp_hwirq;
+	struct irq_domain	*domain;
+};
+
+struct mmp_intc_conf {
+	unsigned int	conf_enable;
+	unsigned int	conf_disable;
+	unsigned int	conf_mask;
+};
+
+void __iomem *mmp_icu_base;
+static struct icu_chip_data icu_data[MAX_ICU_NR];
+static int max_icu_nr;
+
+extern void mmp2_clear_pmic_int(void);
+
+static void icu_mask_ack_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_disable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+#ifdef CONFIG_CPU_MMP2
+		if ((data->virq_base == data->clr_mfp_irq_base)
+			&& (hwirq == data->clr_mfp_hwirq))
+			mmp2_clear_pmic_int();
+#endif
+		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static void icu_mask_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_disable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static void icu_unmask_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_enable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+		r = readl_relaxed(data->reg_mask) & ~(1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name		= "icu_irq",
+	.irq_mask	= icu_mask_irq,
+	.irq_mask_ack	= icu_mask_ack_irq,
+	.irq_unmask	= icu_unmask_irq,
+};
+
+static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_domain *domain;
+	struct icu_chip_data *data;
+	int i;
+	unsigned long mask, status, n;
+
+	for (i = 1; i < max_icu_nr; i++) {
+		if (irq == icu_data[i].cascade_irq) {
+			domain = icu_data[i].domain;
+			data = (struct icu_chip_data *)domain->host_data;
+			break;
+		}
+	}
+	if (i >= max_icu_nr) {
+		pr_err("Spurious irq %d in MMP INTC\n", irq);
+		return;
+	}
+
+	mask = readl_relaxed(data->reg_mask);
+	while (1) {
+		status = readl_relaxed(data->reg_status) & ~mask;
+		if (status == 0)
+			break;
+		n = find_first_bit(&status, BITS_PER_LONG);
+		while (n < BITS_PER_LONG) {
+			generic_handle_irq(icu_data[i].virq_base + n);
+			n = find_next_bit(&status, BITS_PER_LONG, n + 1);
+		}
+	}
+}
+
+static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID);
+	return 0;
+}
+
+static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
+{
+	*out_hwirq = intspec[0];
+	return 0;
+}
+
+const struct irq_domain_ops mmp_irq_domain_ops = {
+	.map		= mmp_irq_domain_map,
+	.xlate		= mmp_irq_domain_xlate,
+};
+
+static struct mmp_intc_conf mmp_conf = {
+	.conf_enable	= 0x51,
+	.conf_disable	= 0x0,
+	.conf_mask	= 0x7f,
+};
+
+static struct mmp_intc_conf mmp2_conf = {
+	.conf_enable	= 0x20,
+	.conf_disable	= 0x0,
+	.conf_mask	= 0x7f,
+};
+
+/* MMP (ARMv5) */
+void __init icu_init_irq(void)
+{
+	int irq;
+
+	max_icu_nr = 1;
+	mmp_icu_base = ioremap(0xd4282000, 0x1000);
+	icu_data[0].conf_enable = mmp_conf.conf_enable;
+	icu_data[0].conf_disable = mmp_conf.conf_disable;
+	icu_data[0].conf_mask = mmp_conf.conf_mask;
+	icu_data[0].nr_irqs = 64;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[0]);
+	for (irq = 0; irq < 64; irq++) {
+		icu_mask_irq(irq_get_irq_data(irq));
+		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	irq_set_default_host(icu_data[0].domain);
+}
+
+/* MMP2 (ARMv7) */
+void __init mmp2_init_icu(void)
+{
+	int irq;
+
+	max_icu_nr = 8;
+	mmp_icu_base = ioremap(0xd4282000, 0x1000);
+	icu_data[0].conf_enable = mmp2_conf.conf_enable;
+	icu_data[0].conf_disable = mmp2_conf.conf_disable;
+	icu_data[0].conf_mask = mmp2_conf.conf_mask;
+	icu_data[0].nr_irqs = 64;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[0]);
+	icu_data[1].reg_status = mmp_icu_base + 0x150;
+	icu_data[1].reg_mask = mmp_icu_base + 0x168;
+	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
+	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
+	icu_data[1].nr_irqs = 2;
+	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
+	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
+						   icu_data[1].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[1]);
+	icu_data[2].reg_status = mmp_icu_base + 0x154;
+	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
+	icu_data[2].nr_irqs = 2;
+	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
+	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
+						   icu_data[2].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[2]);
+	icu_data[3].reg_status = mmp_icu_base + 0x180;
+	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
+	icu_data[3].nr_irqs = 3;
+	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
+	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
+						   icu_data[3].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[3]);
+	icu_data[4].reg_status = mmp_icu_base + 0x158;
+	icu_data[4].reg_mask = mmp_icu_base + 0x170;
+	icu_data[4].nr_irqs = 5;
+	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
+	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
+						   icu_data[4].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[4]);
+	icu_data[5].reg_status = mmp_icu_base + 0x15c;
+	icu_data[5].reg_mask = mmp_icu_base + 0x174;
+	icu_data[5].nr_irqs = 15;
+	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
+	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
+						   icu_data[5].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[5]);
+	icu_data[6].reg_status = mmp_icu_base + 0x160;
+	icu_data[6].reg_mask = mmp_icu_base + 0x178;
+	icu_data[6].nr_irqs = 2;
+	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
+	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
+						   icu_data[6].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[6]);
+	icu_data[7].reg_status = mmp_icu_base + 0x188;
+	icu_data[7].reg_mask = mmp_icu_base + 0x184;
+	icu_data[7].nr_irqs = 2;
+	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
+	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
+						   icu_data[7].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[7]);
+	for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) {
+		icu_mask_irq(irq_get_irq_data(irq));
+		switch (irq) {
+		case IRQ_MMP2_PMIC_MUX:
+		case IRQ_MMP2_RTC_MUX:
+		case IRQ_MMP2_KEYPAD_MUX:
+		case IRQ_MMP2_TWSI_MUX:
+		case IRQ_MMP2_MISC_MUX:
+		case IRQ_MMP2_MIPI_HSI1_MUX:
+		case IRQ_MMP2_MIPI_HSI0_MUX:
+			irq_set_chip(irq, &icu_irq_chip);
+			irq_set_chained_handler(irq, icu_mux_irq_demux);
+			break;
+		default:
+			irq_set_chip_and_handler(irq, &icu_irq_chip,
+						 handle_level_irq);
+			break;
+		}
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	irq_set_default_host(icu_data[0].domain);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id intc_ids[] __initconst = {
+	{ .compatible = "mrvl,mmp-intc", .data = &mmp_conf },
+	{ .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf },
+	{}
+};
+
+static const struct of_device_id mmp_mux_irq_match[] __initconst = {
+	{ .compatible = "mrvl,mmp2-mux-intc" },
+	{}
+};
+
+int __init mmp2_mux_init(struct device_node *parent)
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct resource res;
+	int i, irq_base, ret, irq;
+	u32 nr_irqs, mfp_irq;
+
+	node = parent;
+	max_icu_nr = 1;
+	for (i = 1; i < MAX_ICU_NR; i++) {
+		node = of_find_matching_node(node, mmp_mux_irq_match);
+		if (!node)
+			break;
+		of_id = of_match_node(&mmp_mux_irq_match[0], node);
+		ret = of_property_read_u32(node, "mrvl,intc-nr-irqs",
+					   &nr_irqs);
+		if (ret) {
+			pr_err("Not found mrvl,intc-nr-irqs property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		ret = of_address_to_resource(node, 0, &res);
+		if (ret < 0) {
+			pr_err("Not found reg property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		icu_data[i].reg_status = mmp_icu_base + res.start;
+		ret = of_address_to_resource(node, 1, &res);
+		if (ret < 0) {
+			pr_err("Not found reg property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		icu_data[i].reg_mask = mmp_icu_base + res.start;
+		icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0);
+		if (!icu_data[i].cascade_irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+		if (irq_base < 0) {
+			pr_err("Failed to allocate IRQ numbers for mux intc\n");
+			ret = irq_base;
+			goto err;
+		}
+		if (!of_property_read_u32(node, "mrvl,clr-mfp-irq",
+					  &mfp_irq)) {
+			icu_data[i].clr_mfp_irq_base = irq_base;
+			icu_data[i].clr_mfp_hwirq = mfp_irq;
+		}
+		irq_set_chained_handler(icu_data[i].cascade_irq,
+					icu_mux_irq_demux);
+		icu_data[i].nr_irqs = nr_irqs;
+		icu_data[i].virq_base = irq_base;
+		icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs,
+							   irq_base, 0,
+							   &mmp_irq_domain_ops,
+							   &icu_data[i]);
+		for (irq = irq_base; irq < irq_base + nr_irqs; irq++)
+			icu_mask_irq(irq_get_irq_data(irq));
+	}
+	max_icu_nr = i;
+	return 0;
+err:
+	of_node_put(node);
+	max_icu_nr = i;
+	return ret;
+}
+
+void __init mmp_dt_irq_init(void)
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct mmp_intc_conf *conf;
+	int nr_irqs, irq_base, ret, irq;
+
+	node = of_find_matching_node(NULL, intc_ids);
+	if (!node) {
+		pr_err("Failed to find interrupt controller in arch-mmp\n");
+		return;
+	}
+	of_id = of_match_node(intc_ids, node);
+	conf = of_id->data;
+
+	ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs);
+	if (ret) {
+		pr_err("Not found mrvl,intc-nr-irqs property\n");
+		return;
+	}
+
+	mmp_icu_base = of_iomap(node, 0);
+	if (!mmp_icu_base) {
+		pr_err("Failed to get interrupt controller register\n");
+		return;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0);
+	if (irq_base < 0) {
+		pr_err("Failed to allocate IRQ numbers\n");
+		goto err;
+	} else if (irq_base != NR_IRQS_LEGACY) {
+		pr_err("ICU's irqbase should be started from 0\n");
+		goto err;
+	}
+	icu_data[0].conf_enable = conf->conf_enable;
+	icu_data[0].conf_disable = conf->conf_disable;
+	icu_data[0].conf_mask = conf->conf_mask;
+	icu_data[0].nr_irqs = nr_irqs;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0,
+						   &mmp_irq_domain_ops,
+						   &icu_data[0]);
+	irq_set_default_host(icu_data[0].domain);
+	for (irq = 0; irq < nr_irqs; irq++)
+		icu_mask_irq(irq_get_irq_data(irq));
+	mmp2_mux_init(node);
+	return;
+err:
+	iounmap(mmp_icu_base);
+}
+#endif

arch/arm/mach-mmp/mmp-dt.c

@@ -14,14 +14,19 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
 #include <mach/irqs.h>
 
 #include "common.h"
 
-extern struct sys_timer pxa168_timer;
-extern void __init icu_init_irq(void);
+extern void __init mmp_dt_irq_init(void);
+extern void __init mmp_dt_init_timer(void);
 
-static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
+static struct sys_timer mmp_dt_timer = {
+	.init	= mmp_dt_init_timer,
+};
+
+static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
@@ -32,44 +37,47 @@ static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
 	{}
 };
 
-static int __init mmp_intc_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, 0);
-	return 0;
-}
-
-static int __init mmp_gpio_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, IRQ_GPIO_START);
-	return 0;
-}
-
-static const struct of_device_id mmp_irq_match[] __initconst = {
-	{ .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
-	{ .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
+static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
 	{}
 };
 
-static void __init mmp_dt_init(void)
+static void __init pxa168_dt_init(void)
 {
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     pxa168_auxdata_lookup, NULL);
+}
 
-	of_irq_init(mmp_irq_match);
-
+static void __init pxa910_dt_init(void)
+{
 	of_platform_populate(NULL, of_default_bus_match_table,
-			     mmp_auxdata_lookup, NULL);
+			     pxa910_auxdata_lookup, NULL);
 }
 
-static const char *pxa168_dt_board_compat[] __initdata = {
+static const char *mmp_dt_board_compat[] __initdata = {
 	"mrvl,pxa168-aspenite",
+	"mrvl,pxa910-dkb",
 	NULL,
 };
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= icu_init_irq,
-	.timer		= &pxa168_timer,
-	.init_machine	= mmp_dt_init,
-	.dt_compat	= pxa168_dt_board_compat,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= pxa168_dt_init,
+	.dt_compat	= mmp_dt_board_compat,
+MACHINE_END
+
+DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= pxa910_dt_init,
+	.dt_compat	= mmp_dt_board_compat,
 MACHINE_END

arch/arm/mach-mmp/mmp2-dt.c

@@ -0,0 +1,60 @@
+/*
+ *  linux/arch/arm/mach-mmp/mmp2-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/regs-apbc.h>
+
+#include "common.h"
+
+extern void __init mmp_dt_irq_init(void);
+extern void __init mmp_dt_init_timer(void);
+
+static struct sys_timer mmp_dt_timer = {
+	.init	= mmp_dt_init_timer,
+};
+
+static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+	{}
+};
+
+static void __init mmp2_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     mmp2_auxdata_lookup, NULL);
+}
+
+static const char *mmp2_dt_board_compat[] __initdata = {
+	"mrvl,mmp2-brownstone",
+	NULL,
+};
+
+DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= mmp2_dt_init,
+	.dt_compat	= mmp2_dt_board_compat,
+MACHINE_END

arch/arm/mach-mmp/time.c

@@ -25,6 +25,9 @@
 
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/sched_clock.h>
 #include <mach/addr-map.h>
@@ -41,6 +44,8 @@
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
+static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
+
 /*
  * FIXME: the timer needs some delay to stablize the counter capture
  */
@@ -48,12 +53,12 @@ static inline uint32_t timer_read(void)
 {
 	int delay = 100;
 
-	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
+	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
 		cpu_relax();
 
-	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
+	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
 }
 
 static u32 notrace mmp_read_sched_clock(void)
@@ -68,12 +73,12 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/*
 	 * Clear pending interrupt status.
 	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
 
 	/*
 	 * Disable timer 0.
 	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
 
 	c->event_handler(c);
 
@@ -90,23 +95,23 @@ static int timer_set_next_event(unsigned long delta,
 	/*
 	 * Disable timer 0.
 	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
 
 	/*
 	 * Clear and enable timer match 0 interrupt.
 	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_IER(0));
 
 	/*
 	 * Setup new clockevent timer value.
 	 */
-	__raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+	__raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0));
 
 	/*
 	 * Enable timer 0.
 	 */
-	__raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x03, mmp_timer_base + TMR_CER);
 
 	local_irq_restore(flags);
 
@@ -124,7 +129,7 @@ static void timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* disable the matching interrupt */
-		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+		__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -157,27 +162,27 @@ static struct clocksource cksrc = {
 
 static void __init timer_config(void)
 {
-	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+	uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
 
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+	__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
 
 	ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
 		(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
-	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+	__raw_writel(ccr, mmp_timer_base + TMR_CCR);
 
 	/* set timer 0 to periodic mode, and timer 1 to free-running mode */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
+	__raw_writel(0x2, mmp_timer_base + TMR_CMR);
 
-	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(0));
 
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+	__raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(1));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(1));
 
 	/* enable timer 1 counter */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
 static struct irqaction timer_irq = {
@@ -203,3 +208,37 @@ void __init timer_init(int irq)
 	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt);
 }
+
+#ifdef CONFIG_OF
+static struct of_device_id mmp_timer_dt_ids[] = {
+	{ .compatible = "mrvl,mmp-timer", },
+	{}
+};
+
+void __init mmp_dt_init_timer(void)
+{
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, mmp_timer_dt_ids);
+	if (!np) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		ret = -EINVAL;
+		goto out;
+	}
+	mmp_timer_base = of_iomap(np, 0);
+	if (!mmp_timer_base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	timer_init(irq);
+	return;
+out:
+	pr_err("Failed to get timer from device tree with error:%d\n", ret);
+}
+#endif

arch/arm/mach-msm/board-msm8x60.c

@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();

arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h

@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
+	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
 	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}

arch/arm/mach-pxa/pxa27x.c

@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 

arch/arm/mach-s3c24xx/Kconfig

@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help

arch/arm/mach-s5pv210/mach-goni.c

@@ -25,6 +25,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware/vic.h>
@@ -765,6 +766,7 @@ static void __init goni_pmic_init(void)
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 

arch/arm/mach-sa1100/generic.c

@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };

arch/arm/mach-u300/core.c

@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 

arch/arm/mach-u300/i2c.c

@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},

arch/arm/mach-u300/include/mach/irqs.h

@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif

arch/arm/mach-ux500/mbox-db5500.c

@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -18,6 +18,8 @@
 #ifndef __PLAT_S3C_SDHCI_H
 #define __PLAT_S3C_SDHCI_H __FILE__
 
+#include <plat/devs.h>
+
 struct platform_device;
 struct mmc_host;
 struct mmc_card;
@@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { }
 
 #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
 
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	}
+}
+
 #endif /* __PLAT_S3C_SDHCI_H */

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -38,7 +38,7 @@ static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
-#endif
+#endif	/* CONFIG_RTC_DRV_BFIN */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = {
 		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART0 */
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
 	{
@@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = {
 		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART1 */
 #ifdef CONFIG_SERIAL_BFIN_UART2
 static struct resource bfin_uart2_resources[] = {
 	{
@@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = {
 		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 	},
 };
-#endif
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART2 */
+#endif	/* CONFIG_SERIAL_BFIN */
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
 	.resource = bfin_sir0_resources,
 };
-#endif
+#endif	/* CONFIG_BFIN_SIR0 */
 #ifdef CONFIG_BFIN_SIR1
 static struct resource bfin_sir1_resources[] = {
 	{
@@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
 	.resource = bfin_sir1_resources,
 };
-#endif
+#endif	/* CONFIG_BFIN_SIR1 */
 #ifdef CONFIG_BFIN_SIR2
 static struct resource bfin_sir2_resources[] = {
 	{
@@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
 	.resource = bfin_sir2_resources,
 };
-#endif
-#endif
+#endif	/* CONFIG_BFIN_SIR2 */
+#endif	/* CONFIG_BFIN_SIR */
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
@@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = {
 		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 static struct resource bfin_sport1_uart_resources[] = {
 	{
@@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = {
 		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 static struct resource bfin_sport2_uart_resources[] = {
 	{
@@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = {
 		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 static struct resource bfin_sport3_uart_resources[] = {
 	{
@@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = {
 		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 	},
 };
-#endif
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
+#endif	/* CONFIG_SERIAL_BFIN_SPORT */
 
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 static unsigned short bfin_can_peripherals[] = {
@@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = {
 		.platform_data = &bfin_can_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_CAN_BFIN */
 
 /*
  *  USB-LAN EzExtender board
@@ -488,7 +488,7 @@ static struct platform_device smc91x_device = {
 		.platform_data	= &smc91x_info,
 	},
 };
-#endif
+#endif	/* CONFIG_SMC91X */
 
 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
@@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 };
-#endif
+#endif	/* CONFIG_MTD_M25P80 */
+#endif	/* CONFIG_SPI_BFIN5XX */
 
 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 #include <linux/spi/ad7879.h>
@@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.gpio_export		= 1,	/* Export GPIO to gpiolib */
 	.gpio_base		= -1,	/* Dynamic allocation */
 };
-#endif
+#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
@@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = {
 		.platform_data = &bfin_lq035q1_data,
 	},
 };
-#endif
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
 
 static struct spi_board_info bf538_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
@@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
-#endif
+#endif	/* CONFIG_MTD_M25P80 */
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 	{
 		.modalias = "ad7879",
@@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.chip_select = 1,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif
+#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 	{
 		.modalias = "bfin-lq035q1-spi",
@@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.chip_select = 2,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.bus_num = 0,
 		.chip_select = 1,
 	},
-#endif
+#endif	/* CONFIG_SPI_SPIDEV */
 };
 
 /* SPI (0) */
@@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = {
 		},
 };
 
-#endif  /* spi master and devices */
-
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = {
 	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
 	.resource = bfin_twi1_resource,
 };
-#endif
-#endif
+#endif	/* CONFIG_BF542 */
+#endif	/* CONFIG_I2C_BLACKFIN_TWI */
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>

arch/hexagon/kernel/dma.c

@@ -22,6 +22,7 @@
 #include <linux/bootmem.h>
 #include <linux/genalloc.h>
 #include <asm/dma-mapping.h>
+#include <linux/module.h>
 
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);

arch/hexagon/kernel/process.c

@@ -1,7 +1,7 @@
 /*
  * Process creation support for Hexagon
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle;
 void cpu_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
 		local_irq_disable();
 		while (!need_resched()) {
 			idle_sleep();
@@ -97,7 +97,7 @@ void cpu_idle(void)
 			local_irq_disable();
 		}
 		local_irq_enable();
-		tick_nohz_restart_sched_tick();
+		tick_nohz_idle_exit();
 		schedule();
 	}
 }

arch/hexagon/kernel/ptrace.c

@@ -28,6 +28,7 @@
 #include <linux/ptrace.h>
 #include <linux/regset.h>
 #include <linux/user.h>
+#include <linux/elf.h>
 
 #include <asm/user.h>
 

arch/hexagon/kernel/smp.c

@@ -1,7 +1,7 @@
 /*
  * SMP support for Hexagon
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
+#include <linux/cpu.h>
 
 #include <asm/time.h>    /*  timer_interrupt  */
 #include <asm/hexagon_vm.h>
@@ -177,7 +178,12 @@ void __cpuinit start_secondary(void)
 
 	printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
 
+	notify_cpu_starting(cpu);
+
+	ipi_call_lock();
 	set_cpu_online(cpu, true);
+	ipi_call_unlock();
+
 	local_irq_enable();
 
 	cpu_idle();

arch/hexagon/kernel/time.c

@@ -28,6 +28,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/module.h>
 
 #include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>

arch/hexagon/kernel/vdso.c

@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/binfmts.h>
 
 #include <asm/vdso.h>
 

arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi

@@ -0,0 +1,43 @@
+/*
+ * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+message@42400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x42400 0x200>;
+	interrupts = <
+		0xb4 2 0 0
+		0xb5 2 0 0
+		0xb6 2 0 0
+		0xb7 2 0 0>;
+};

arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi

@@ -53,6 +53,16 @@ timer@41100 {
 		      3 0 3 0>;
 };
 
+message@41400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2 0 0
+		0xb1 2 0 0
+		0xb2 2 0 0
+		0xb3 2 0 0>;
+};
+
 msi@41600 {
 	compatible = "fsl,mpic-msi";
 	reg = <0x41600 0x80>;

arch/powerpc/include/asm/mpic.h

@@ -275,9 +275,6 @@ struct mpic
 	unsigned int		isu_mask;
 	/* Number of sources */
 	unsigned int		num_sources;
-	/* default senses array */
-	unsigned char		*senses;
-	unsigned int		senses_count;
 
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
@@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node,
 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 			    phys_addr_t phys_addr);
 
-/* Set default sense codes
- *
- * @mpic:	controller
- * @senses:	array of sense codes
- * @count:	size of above array
- *
- * Optionally provide an array (indexed on hardware interrupt numbers
- * for this MPIC) of default sense codes for the chip. Those are linux
- * sense codes IRQ_TYPE_*
- *
- * The driver gets ownership of the pointer, don't dispose of it or
- * anything like that. __init only.
- */
-extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
-
 
 /* Initialize the controller. After this has been called, none of the above
  * should be called again for this mpic

arch/powerpc/include/asm/mpic_msgr.h

@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 struct mpic_msgr {
 	u32 __iomem *base;

arch/powerpc/include/asm/reg_booke.h

@@ -15,11 +15,6 @@
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
 #define __ASM_POWERPC_REG_BOOKE_H__
 
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
 /* Machine State Register (MSR) Fields */
 #define MSR_GS		(1<<28) /* Guest state */
 #define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */

arch/powerpc/kernel/setup_32.c

@@ -150,6 +150,9 @@ notrace void __init machine_init(u64 dt_ptr)
 }
 
 #ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+
 /* Checks wdt=x and wdt_period=xx command-line option */
 notrace int __init early_parse_wdt(char *p)
 {

arch/powerpc/platforms/85xx/common.c

@@ -21,6 +21,12 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "fsl,cpm2", },
 	{ .compatible = "fsl,srio", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
+	/* For the PMC driver */
+	{ .compatible = "fsl,mpc8548-guts", },
+	/* Probably unnecessary? */
+	{ .compatible = "gpio-leds", },
 	{},
 };
 

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -399,12 +399,6 @@ static int __init board_fixups(void)
 machine_arch_initcall(mpc8568_mds, board_fixups);
 machine_arch_initcall(mpc8569_mds, board_fixups);
 
-static struct of_device_id mpc85xx_ids[] = {
-	{ .compatible = "fsl,mpc8548-guts", },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -412,10 +406,7 @@ static int __init mpc85xx_publish_devices(void)
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
-	mpc85xx_common_publish_devices();
-	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
-
-	return 0;
+	return mpc85xx_common_publish_devices();
 }
 
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -460,18 +460,7 @@ static void __init p1022_ds_setup_arch(void)
 	pr_info("Freescale P1022 DS reference board\n");
 }
 
-static struct of_device_id __initdata p1022_ds_ids[] = {
-	/* So that the DMA channel nodes can be probed individually: */
-	{ .compatible = "fsl,eloplus-dma", },
-	{},
-};
-
-static int __init p1022_ds_publish_devices(void)
-{
-	mpc85xx_common_publish_devices();
-	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
-}
-machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
+machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/powermac/low_i2c.c

@@ -366,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * If the timer is pending, that means we raced with the
+	 * irq, in which case we just return
+	 */
+	if (timer_pending(&host->timeout_timer))
+		goto skip;
+
 	kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 	if (host->state != state_idle) {
 		host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 		add_timer(&host->timeout_timer);
 	}
+ skip:
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 

arch/powerpc/platforms/pseries/eeh.c

@@ -1076,7 +1076,7 @@ static void eeh_add_device_late(struct pci_dev *dev)
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
 
 	dn = pci_device_to_OF_node(dev);
-	edev = pci_dev_to_eeh_dev(dev);
+	edev = of_node_to_eeh_dev(dn);
 	if (edev->pdev == dev) {
 		pr_debug("EEH: Already referenced !\n");
 		return;

arch/powerpc/sysdev/mpic.c

@@ -604,18 +604,14 @@ static struct mpic *mpic_find(unsigned int irq)
 }
 
 /* Determine if the linux irq is an IPI */
-static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
+static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src)
 {
-	unsigned int src = virq_to_hw(irq);
-
 	return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
 }
 
 /* Determine if the linux irq is a timer */
-static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
+static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src)
 {
-	unsigned int src = virq_to_hw(irq);
-
 	return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
 }
 
@@ -876,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	if (src >= mpic->num_sources)
 		return -EINVAL;
 
+	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
+
+	/* We don't support "none" type */
 	if (flow_type == IRQ_TYPE_NONE)
-		if (mpic->senses && src < mpic->senses_count)
-			flow_type = mpic->senses[src];
-	if (flow_type == IRQ_TYPE_NONE)
-		flow_type = IRQ_TYPE_LEVEL_LOW;
+		flow_type = IRQ_TYPE_DEFAULT;
+
+	/* Default: read HW settings */
+	if (flow_type == IRQ_TYPE_DEFAULT) {
+		switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+			       MPIC_INFO(VECPRI_SENSE_MASK))) {
+			case MPIC_INFO(VECPRI_SENSE_EDGE) |
+			     MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+				flow_type = IRQ_TYPE_EDGE_RISING;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_EDGE) |
+			     MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+				flow_type = IRQ_TYPE_EDGE_FALLING;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+			     MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+				flow_type = IRQ_TYPE_LEVEL_HIGH;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+			     MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+				flow_type = IRQ_TYPE_LEVEL_LOW;
+				break;
+		}
+	}
 
+	/* Apply to irq desc */
 	irqd_set_trigger_type(d, flow_type);
 
+	/* Apply to HW */
 	if (mpic_is_ht_interrupt(mpic, src))
 		vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
 			MPIC_VECPRI_SENSE_EDGE;
 	else
 		vecpri = mpic_type_to_vecpri(mpic, flow_type);
 
-	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
 	vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) |
 			MPIC_INFO(VECPRI_SENSE_MASK));
 	vnew |= vecpri;
@@ -1026,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
 	irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq);
 
 	/* Set default irq type */
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+	irq_set_irq_type(virq, IRQ_TYPE_DEFAULT);
 
 	/* If the MPIC was reset, then all vectors have already been
 	 * initialized.  Otherwise, a per source lazy initialization
@@ -1417,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
 
-void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
-{
-	mpic->senses = senses;
-	mpic->senses_count = count;
-}
-
 void __init mpic_init(struct mpic *mpic)
 {
 	int i, cpu;
@@ -1555,12 +1569,12 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 		return;
 
 	raw_spin_lock_irqsave(&mpic_lock, flags);
-	if (mpic_is_ipi(mpic, irq)) {
+	if (mpic_is_ipi(mpic, src)) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(src - mpic->ipi_vecs[0],
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
-	} else if (mpic_is_tm(mpic, irq)) {
+	} else if (mpic_is_tm(mpic, src)) {
 		reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_tm_write(src - mpic->timer_vecs[0],

arch/powerpc/sysdev/mpic_msgr.c

@@ -27,6 +27,7 @@
 
 static struct mpic_msgr **mpic_msgrs;
 static unsigned int mpic_msgr_count;
+static DEFINE_RAW_SPINLOCK(msgrs_lock);
 
 static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value)
 {
@@ -56,12 +57,11 @@ struct mpic_msgr *mpic_msgr_get(unsigned int reg_num)
 	if (reg_num >= mpic_msgr_count)
 		return ERR_PTR(-ENODEV);
 
-	raw_spin_lock_irqsave(&msgr->lock, flags);
-	if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) {
-		msgr = mpic_msgrs[reg_num];
+	raw_spin_lock_irqsave(&msgrs_lock, flags);
+	msgr = mpic_msgrs[reg_num];
+	if (msgr->in_use == MSGR_FREE)
 		msgr->in_use = MSGR_INUSE;
-	}
-	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+	raw_spin_unlock_irqrestore(&msgrs_lock, flags);
 
 	return msgr;
 }
@@ -228,7 +228,7 @@ static __devinit int mpic_msgr_probe(struct platform_device *dev)
 
 		reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
 		msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE;
-		msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET;
+		msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET);
 		msgr->in_use = MSGR_FREE;
 		msgr->num = i;
 		raw_spin_lock_init(&msgr->lock);

arch/powerpc/sysdev/scom.c

@@ -22,6 +22,7 @@
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <asm/debug.h>
 #include <asm/prom.h>
 #include <asm/scom.h>
 

arch/sh/include/asm/atomic.h

@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <asm/cmpxchg.h>
 
-#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)		((v)->counter = (i))

arch/sh/mm/fault_32.c

@@ -86,7 +86,7 @@ static noinline int vmalloc_fault(unsigned long address)
 	pte_t *pte_k;
 
 	/* Make sure we are in vmalloc/module/P3 area: */
-	if (!(address >= VMALLOC_START && address < P3_ADDR_MAX))
+	if (!(address >= P3SEG && address < P3_ADDR_MAX))
 		return -1;
 
 	/*

arch/tile/include/asm/pci.h

@@ -47,8 +47,8 @@ struct pci_controller {
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-int __devinit tile_pci_init(void);
-int __devinit pcibios_init(void);
+int __init tile_pci_init(void);
+int __init pcibios_init(void);
 
 static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
 

arch/tile/kernel/pci.c

@@ -141,7 +141,7 @@ static int __devinit tile_init_irqs(int controller_id,
  *
  * Returns the number of controllers discovered.
  */
-int __devinit tile_pci_init(void)
+int __init tile_pci_init(void)
 {
 	int i;
 
@@ -287,7 +287,7 @@ static void __devinit fixup_read_and_payload_sizes(void)
  * The controllers have been set up by the time we get here, by a call to
  * tile_pci_init.
  */
-int __devinit pcibios_init(void)
+int __init pcibios_init(void)
 {
 	int i;
 

arch/x86/boot/compressed/head_32.S

@@ -33,6 +33,9 @@
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
+	jmp	preferred_addr
+
+	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
 	 * efi_main() can find its arugments.
@@ -41,12 +44,17 @@ ENTRY(startup_32)
 
 	call	efi_main
 	cmpl	$0, %eax
-	je	preferred_addr
 	movl	%eax, %esi
-	call	1f
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popl	%eax
-	subl	$1b, %eax
+	subl	$3b, %eax
 	subl	BP_pref_address(%esi), %eax
 	add	BP_code32_start(%esi), %eax
 	leal	preferred_addr(%eax), %eax

arch/x86/boot/compressed/head_64.S

@@ -200,18 +200,28 @@ ENTRY(startup_64)
 	 * entire text+data+bss and hopefully all of memory.
 	 */
 #ifdef CONFIG_EFI_STUB
-	pushq	%rsi
+	/*
+	 * The entry point for the PE/COFF executable is 0x210, so only
+	 * legacy boot loaders will execute this jmp.
+	 */
+	jmp	preferred_addr
+
+	.org 0x210
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
 	call	efi_main
-	popq	%rsi
-	cmpq	$0,%rax
-	je	preferred_addr
 	movq	%rax,%rsi
-	call	1f
+	cmpq	$0,%rax
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popq	%rax
-	subq	$1b, %rax
+	subq	$3b, %rax
 	subq	BP_pref_address(%rsi), %rax
 	add	BP_code32_start(%esi), %eax
 	leaq	preferred_addr(%rax), %rax

arch/x86/boot/tools/build.c

@@ -205,8 +205,13 @@ int main(int argc, char ** argv)
 	put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
 
 #ifdef CONFIG_X86_32
-	/* Address of entry point */
-	put_unaligned_le32(i, &buf[pe_header + 0x28]);
+	/*
+	 * Address of entry point.
+	 *
+	 * The EFI stub entry point is +16 bytes from the start of
+	 * the .text section.
+	 */
+	put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);
 
 	/* .text size */
 	put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
@@ -217,9 +222,11 @@ int main(int argc, char ** argv)
 	/*
 	 * Address of entry point. startup_32 is at the beginning and
 	 * the 64-bit entry point (startup_64) is always 512 bytes
-	 * after.
+	 * after. The EFI stub entry point is 16 bytes after that, as
+	 * the first instruction allows legacy loaders to jump over
+	 * the EFI stub initialisation
 	 */
-	put_unaligned_le32(i + 512, &buf[pe_header + 0x28]);
+	put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);
 
 	/* .text size */
 	put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);

arch/x86/include/asm/posix_types.h

@@ -7,9 +7,9 @@
 #else
 # ifdef __i386__
 #  include "posix_types_32.h"
-# elif defined(__LP64__)
-#  include "posix_types_64.h"
-# else
+# elif defined(__ILP32__)
 #  include "posix_types_x32.h"
+# else
+#  include "posix_types_64.h"
 # endif
 #endif

arch/x86/include/asm/sigcontext.h

@@ -257,7 +257,7 @@ struct sigcontext {
 	__u64 oldmask;
 	__u64 cr2;
 	struct _fpstate __user *fpstate;	/* zero when no FPU context */
-#ifndef __LP64__
+#ifdef __ILP32__
 	__u32 __fpstate_pad;
 #endif
 	__u64 reserved1[8];

arch/x86/include/asm/siginfo.h

@@ -2,7 +2,13 @@
 #define _ASM_X86_SIGINFO_H
 
 #ifdef __x86_64__
-# define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+# ifdef __ILP32__ /* x32 */
+typedef long long __kernel_si_clock_t __attribute__((aligned(4)));
+#  define __ARCH_SI_CLOCK_T		__kernel_si_clock_t
+#  define __ARCH_SI_ATTRIBUTES		__attribute__((aligned(8)))
+# else /* x86-64 */
+#  define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+# endif
 #endif
 
 #include <asm-generic/siginfo.h>

arch/x86/include/asm/unistd.h

@@ -63,10 +63,10 @@
 #else
 # ifdef __i386__
 #  include <asm/unistd_32.h>
-# elif defined(__LP64__)
-#  include <asm/unistd_64.h>
-# else
+# elif defined(__ILP32__)
 #  include <asm/unistd_x32.h>
+# else
+#  include <asm/unistd_64.h>
 # endif
 #endif
 

arch/x86/include/asm/x86_init.h

@@ -195,6 +195,5 @@ extern struct x86_msi_ops x86_msi;
 
 extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
-extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node);
 
 #endif

arch/x86/kernel/acpi/sleep.c

@@ -24,6 +24,10 @@ unsigned long acpi_realmode_flags;
 static char temp_stack[4096];
 #endif
 
+asmlinkage void acpi_enter_s3(void)
+{
+	acpi_enter_sleep_state(3, wake_sleep_flags);
+}
 /**
  * acpi_suspend_lowlevel - save kernel state
  *

arch/x86/kernel/acpi/sleep.h

@@ -3,12 +3,16 @@
  */
 
 #include <asm/trampoline.h>
+#include <linux/linkage.h>
 
 extern unsigned long saved_video_mode;
 extern long saved_magic;
 
 extern int wakeup_pmode_return;
 
+extern u8 wake_sleep_flags;
+extern asmlinkage void acpi_enter_s3(void);
+
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 extern void wakeup_long64(void);
 

arch/x86/kernel/acpi/wakeup_32.S

@@ -74,9 +74,7 @@ restore_registers:
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
-	pushl	$3
-	call	acpi_enter_sleep_state
-	addl	$4, %esp
+	call	acpi_enter_s3
 
 #	In case of S3 failure, we'll emerge here.  Jump
 # 	to ret_point to recover

arch/x86/kernel/acpi/wakeup_64.S

@@ -71,9 +71,7 @@ ENTRY(do_suspend_lowlevel)
 	movq	%rsi, saved_rsi
 
 	addq	$8, %rsp
-	movl	$3, %edi
-	xorl	%eax, %eax
-	call	acpi_enter_sleep_state
+	call	acpi_enter_s3
 	/* in case something went wrong, restore the machine status and go on */
 	jmp	resume_point
 

arch/x86/kernel/apic/apic.c

@@ -1637,9 +1637,11 @@ static int __init apic_verify(void)
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 
 	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (l & MSR_IA32_APICBASE_ENABLE)
+			mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	}
 
 	pr_info("Found and enabled local APIC!\n");
 	return 0;
@@ -1657,13 +1659,15 @@ int __init apic_force_enable(unsigned long addr)
 	 * MSR. This can only be done in software for Intel P6 or later
 	 * and AMD K7 (Model > 1) or later.
 	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-		pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-		enabled_via_apicbase = 1;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
 	}
 	return apic_verify();
 }
@@ -2209,10 +2213,12 @@ static void lapic_resume(void)
 		 * FIXME! This will be wrong if we ever support suspend on
 		 * SMP! We'll need to do this as part of the CPU restore!
 		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
+		if (boot_cpu_data.x86 >= 6) {
+			rdmsr(MSR_IA32_APICBASE, l, h);
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+		}
 	}
 
 	maxlvt = lapic_get_maxlvt();

arch/x86/kernel/apic/apic_numachip.c

@@ -207,8 +207,11 @@ static void __init map_csrs(void)
 
 static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
 {
-	c->phys_proc_id = node;
-	per_cpu(cpu_llc_id, smp_processor_id()) = node;
+
+	if (c->phys_proc_id != node) {
+		c->phys_proc_id = node;
+		per_cpu(cpu_llc_id, smp_processor_id()) = node;
+	}
 }
 
 static int __init numachip_system_init(void)

arch/x86/kernel/apic/x2apic_phys.c

@@ -24,6 +24,12 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (x2apic_phys)
 		return x2apic_enabled();
+	else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
+		x2apic_enabled()) {
+		printk(KERN_DEBUG "System requires x2apic physical mode\n");
+		return 1;
+	}
 	else
 		return 0;
 }

arch/x86/kernel/cpu/amd.c

@@ -26,7 +26,8 @@
  *	contact AMD for precise details and a CPU swap.
  *
  *	See	http://www.multimania.com/poulot/k6bug.html
- *		http://www.amd.com/K6/k6docs/revgd.html
+ *	and	section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
+ *		(Publication # 21266  Issue Date: August 1998)
  *
  *	The following test is erm.. interesting. AMD neglected to up
  *	the chip setting when fixing the bug but they also tweaked some
@@ -94,7 +95,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 				"system stability may be impaired when more than 32 MB are used.\n");
 		else
 			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
-		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 	}
 
 	/* K6 with old style WHCR */
@@ -353,10 +353,11 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 		node = per_cpu(cpu_llc_id, cpu);
 
 	/*
-	 * If core numbers are inconsistent, it's likely a multi-fabric platform,
-	 * so invoke platform-specific handler
+	 * On multi-fabric platform (e.g. Numascale NumaChip) a
+	 * platform-specific handler needs to be called to fixup some
+	 * IDs of the CPU.
 	 */
-	if (c->phys_proc_id != node)
+	if (x86_cpuinit.fixup_cpu_id)
 		x86_cpuinit.fixup_cpu_id(c, node);
 
 	if (!node_online(node)) {

arch/x86/kernel/cpu/common.c

@@ -1162,15 +1162,6 @@ static void dbg_restore_debug_regs(void)
 #define dbg_restore_debug_regs()
 #endif /* ! CONFIG_KGDB */
 
-/*
- * Prints an error where the NUMA and configured core-number mismatch and the
- * platform didn't override this to fix it up
- */
-void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node)
-{
-	pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id);
-}
-
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -433,14 +433,14 @@ int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot,
 	/*  check if @slot is already used or the index is already disabled */
 	ret = amd_get_l3_disable_slot(nb, slot);
 	if (ret >= 0)
-		return -EINVAL;
+		return -EEXIST;
 
 	if (index > nb->l3_cache.indices)
 		return -EINVAL;
 
 	/* check whether the other slot has disabled the same index already */
 	if (index == amd_get_l3_disable_slot(nb, !slot))
-		return -EINVAL;
+		return -EEXIST;
 
 	amd_l3_disable_index(nb, cpu, slot, index);
 
@@ -468,8 +468,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
 	err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val);
 	if (err) {
 		if (err == -EEXIST)
-			printk(KERN_WARNING "L3 disable slot %d in use!\n",
-					    slot);
+			pr_warning("L3 slot %d in use/index already disabled!\n",
+				   slot);
 		return err;
 	}
 	return count;

arch/x86/kernel/i387.c

@@ -235,6 +235,7 @@ int init_fpu(struct task_struct *tsk)
 	if (tsk_used_math(tsk)) {
 		if (HAVE_HWFP && tsk == current)
 			unlazy_fpu(tsk);
+		tsk->thread.fpu.last_cpu = ~0;
 		return 0;
 	}
 

arch/x86/kernel/microcode_amd.c

@@ -82,11 +82,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		pr_warning("CPU%d: family %d not supported\n", cpu, c->x86);
-		return -1;
-	}
-
 	csig->rev = c->microcode;
 	pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
 
@@ -380,6 +375,13 @@ static struct microcode_ops microcode_amd_ops = {
 
 struct microcode_ops * __init init_amd_microcode(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
+		return NULL;
+	}
+
 	patch = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!patch)
 		return NULL;

arch/x86/kernel/microcode_core.c

@@ -419,10 +419,8 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif)
 	if (err)
 		return err;
 
-	if (microcode_init_cpu(cpu) == UCODE_ERROR) {
-		sysfs_remove_group(&dev->kobj, &mc_attr_group);
+	if (microcode_init_cpu(cpu) == UCODE_ERROR)
 		return -EINVAL;
-	}
 
 	return err;
 }
@@ -528,11 +526,11 @@ static int __init microcode_init(void)
 		microcode_ops = init_intel_microcode();
 	else if (c->x86_vendor == X86_VENDOR_AMD)
 		microcode_ops = init_amd_microcode();
-
-	if (!microcode_ops) {
+	else
 		pr_err("no support for this CPU vendor\n");
+
+	if (!microcode_ops)
 		return -ENODEV;
-	}
 
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);

arch/x86/kernel/x86_init.c

@@ -93,7 +93,6 @@ struct x86_init_ops x86_init __initdata = {
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.early_percpu_clock_init	= x86_init_noop,
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
-	.fixup_cpu_id			= x86_default_fixup_cpu_id,
 };
 
 static void default_nmi_init(void) { };

arch/x86/platform/mrst/mrst.c

@@ -805,7 +805,7 @@ void intel_scu_devices_create(void)
 		} else
 			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
 	}
-	intel_scu_notifier_post(SCU_AVAILABLE, 0L);
+	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
 }
 EXPORT_SYMBOL_GPL(intel_scu_devices_create);
 
@@ -814,7 +814,7 @@ void intel_scu_devices_destroy(void)
 {
 	int i;
 
-	intel_scu_notifier_post(SCU_DOWN, 0L);
+	intel_scu_notifier_post(SCU_DOWN, NULL);
 
 	for (i = 0; i < ipc_next_dev; i++)
 		platform_device_del(ipc_devs[i]);

arch/x86/xen/enlighten.c

@@ -261,7 +261,8 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 
 static bool __init xen_check_mwait(void)
 {
-#ifdef CONFIG_ACPI
+#if defined(CONFIG_ACPI) && !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) && \
+	!defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
 	struct xen_platform_op op = {
 		.cmd			= XENPF_set_processor_pminfo,
 		.u.set_pminfo.id	= -1,
@@ -349,7 +350,6 @@ static void __init xen_init_cpuid_mask(void)
 	/* Xen will set CR4.OSXSAVE if supported and not disabled by force */
 	if ((cx & xsave_mask) != xsave_mask)
 		cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
-
 	if (xen_check_mwait())
 		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32));
 }

arch/x86/xen/smp.c

@@ -178,6 +178,7 @@ static void __init xen_fill_possible_map(void)
 static void __init xen_filter_cpu_maps(void)
 {
 	int i, rc;
+	unsigned int subtract = 0;
 
 	if (!xen_initial_domain())
 		return;
@@ -192,8 +193,22 @@ static void __init xen_filter_cpu_maps(void)
 		} else {
 			set_cpu_possible(i, false);
 			set_cpu_present(i, false);
+			subtract++;
 		}
 	}
+#ifdef CONFIG_HOTPLUG_CPU
+	/* This is akin to using 'nr_cpus' on the Linux command line.
+	 * Which is OK as when we use 'dom0_max_vcpus=X' we can only
+	 * have up to X, while nr_cpu_ids is greater than X. This
+	 * normally is not a problem, except when CPU hotplugging
+	 * is involved and then there might be more than X CPUs
+	 * in the guest - which will not work as there is no
+	 * hypercall to expand the max number of VCPUs an already
+	 * running guest has. So cap it up to X. */
+	if (subtract)
+		nr_cpu_ids = nr_cpu_ids - subtract;
+#endif
+
 }
 
 static void __init xen_smp_prepare_boot_cpu(void)

arch/x86/xen/xen-asm.S

@@ -96,7 +96,7 @@ ENTRY(xen_restore_fl_direct)
 
 	/* check for unmasked and pending */
 	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
+	jnz 1f
 2:	call check_events
 1:
 ENDPATCH(xen_restore_fl_direct)

arch/xtensa/include/asm/hardirq.h

@@ -11,9 +11,6 @@
 #ifndef _XTENSA_HARDIRQ_H
 #define _XTENSA_HARDIRQ_H
 
-void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-
 #include <asm-generic/hardirq.h>
 
 #endif	/* _XTENSA_HARDIRQ_H */

arch/xtensa/include/asm/io.h

@@ -14,6 +14,7 @@
 #ifdef __KERNEL__
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <linux/types.h>