staging: rtl8188eu: use is_broadcast_ether_addr

Use is_broadcast_ether_addr instead of checking each byte of the
address array for 0xff. Shortens the code and improves readability.

As required by is_broadcast_ether_addr, the address array sta_addr
is properly aligned in all uses. Thanks to Joe Perches.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c

@@ -361,9 +361,7 @@ static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param,
 		goto exit;
 	}
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+	if (is_broadcast_ether_addr(param->sta_addr)) {
 		if (param->u.crypt.idx >= WEP_KEYS) {
 			ret = -EINVAL;
 			goto exit;
@@ -2208,9 +2206,7 @@ static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param,
 		ret =  -EINVAL;
 		goto exit;
 	}
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+	if (is_broadcast_ether_addr(param->sta_addr)) {
 		if (param->u.crypt.idx >= WEP_KEYS) {
 			ret = -EINVAL;
 			goto exit;
@@ -2471,9 +2467,7 @@ static int rtw_add_sta(struct net_device *dev, struct ieee_param *param)
 	if (!check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)))
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
@@ -2528,9 +2522,7 @@ static int rtw_del_sta(struct net_device *dev, struct ieee_param *param)
 	if (check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
@@ -2566,9 +2558,7 @@ static int rtw_ioctl_get_sta_data(struct net_device *dev, struct ieee_param *par
 	if (check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != true)
 		return -EINVAL;
 
-	if (param_ex->sta_addr[0] == 0xff && param_ex->sta_addr[1] == 0xff &&
-	    param_ex->sta_addr[2] == 0xff && param_ex->sta_addr[3] == 0xff &&
-	    param_ex->sta_addr[4] == 0xff && param_ex->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param_ex->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param_ex->sta_addr);
@@ -2622,9 +2612,7 @@ static int rtw_get_sta_wpaie(struct net_device *dev, struct ieee_param *param)
 	if (check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
 
 	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
@@ -2779,10 +2767,9 @@ static int rtw_ioctl_acl_remove_sta(struct net_device *dev, struct ieee_param *p
 	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
+
 	return rtw_acl_remove_sta(padapter, param->sta_addr);
 }
 
@@ -2794,10 +2781,9 @@ static int rtw_ioctl_acl_add_sta(struct net_device *dev, struct ieee_param *para
 	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) != true)
 		return -EINVAL;
 
-	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
-	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
-	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff)
+	if (is_broadcast_ether_addr(param->sta_addr))
 		return -EINVAL;
+
 	return rtw_acl_add_sta(padapter, param->sta_addr);
 }