Merge branch 'mv88e6390-CMODE'

Andrew Lunn says:

====================
Set the CMODE for mv88e6390 ports

The mv88e6390 ports 9 & 10 allow there CMODE to be set. CMODE is part
of what linux defines as phy-mode. Add the needed phy-modes to linux,
and add code which will act upon the phy-mode property to configure
the switch port.

These patches have been posted before as part of a bigger patchset
which has now been broken up. I've added the received reviewed by
tags, and added device tree documentation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/ethernet.txt

@@ -29,6 +29,9 @@ The following properties are common to the Ethernet controllers:
   * "smii"
   * "xgmii"
   * "trgmii"
+  * "2000base-x",
+  * "2500base-x",
+  * "rxaui"
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
   device; this property is described in ePAPR and so preferred;

drivers/net/dsa/mv88e6xxx/chip.c

@@ -749,6 +749,12 @@ static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
 			goto restore_link;
 	}
 
+	if (chip->info->ops->port_set_cmode) {
+		err = chip->info->ops->port_set_cmode(chip, port, mode);
+		if (err && err != -EOPNOTSUPP)
+			goto restore_link;
+	}
+
 	err = 0;
 restore_link:
 	if (chip->info->ops->port_set_link(chip, port, link))
@@ -3520,6 +3526,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
 	.port_set_egress_unknowns = mv88e6351_port_set_egress_unknowns,
 	.port_set_ether_type = mv88e6351_port_set_ether_type,
 	.port_pause_config = mv88e6390_port_pause_config,
+	.port_set_cmode = mv88e6390x_port_set_cmode,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
 	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
@@ -3738,6 +3745,7 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
 	.port_jumbo_config = mv88e6165_port_jumbo_config,
 	.port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
 	.port_pause_config = mv88e6390_port_pause_config,
+	.port_set_cmode = mv88e6390x_port_set_cmode,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
 	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,

drivers/net/dsa/mv88e6xxx/mv88e6xxx.h

@@ -58,6 +58,9 @@
 #define PORT_STATUS_CMODE_100BASE_X	0x8
 #define PORT_STATUS_CMODE_1000BASE_X	0x9
 #define PORT_STATUS_CMODE_SGMII		0xa
+#define PORT_STATUS_CMODE_2500BASEX	0xb
+#define PORT_STATUS_CMODE_XAUI		0xc
+#define PORT_STATUS_CMODE_RXAUI		0xd
 #define PORT_PCS_CTRL		0x01
 #define PORT_PCS_CTRL_RGMII_DELAY_RXCLK	BIT(15)
 #define PORT_PCS_CTRL_RGMII_DELAY_TXCLK	BIT(14)
@@ -838,6 +841,12 @@ struct mv88e6xxx_ops {
 	int (*port_egress_rate_limiting)(struct mv88e6xxx_chip *chip, int port);
 	int (*port_pause_config)(struct mv88e6xxx_chip *chip, int port);
 
+	/* CMODE control what PHY mode the MAC will use, eg. SGMII, RGMII, etc.
+	 * Some chips allow this to be configured on specific ports.
+	 */
+	int (*port_set_cmode)(struct mv88e6xxx_chip *chip, int port,
+			      phy_interface_t mode);
+
 	/* Snapshot the statistics for a port. The statistics can then
 	 * be read back a leisure but still with a consistent view.
 	 */

drivers/net/dsa/mv88e6xxx/port.c

@@ -11,6 +11,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/phy.h>
 #include "mv88e6xxx.h"
 #include "port.h"
 
@@ -304,6 +305,69 @@ int mv88e6390x_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
 	return mv88e6xxx_port_set_speed(chip, port, speed, true, true);
 }
 
+int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
+			      phy_interface_t mode)
+{
+	u16 reg;
+	u16 cmode;
+	int err;
+
+	if (mode == PHY_INTERFACE_MODE_NA)
+		return 0;
+
+	if (port != 9 && port != 10)
+		return -EOPNOTSUPP;
+
+	switch (mode) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+		cmode = PORT_STATUS_CMODE_1000BASE_X;
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		cmode = PORT_STATUS_CMODE_SGMII;
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		cmode = PORT_STATUS_CMODE_2500BASEX;
+		break;
+	case PHY_INTERFACE_MODE_XGMII:
+		cmode = PORT_STATUS_CMODE_XAUI;
+		break;
+	case PHY_INTERFACE_MODE_RXAUI:
+		cmode = PORT_STATUS_CMODE_RXAUI;
+		break;
+	default:
+		cmode = 0;
+	}
+
+	if (cmode) {
+		err = mv88e6xxx_port_read(chip, port, PORT_STATUS, &reg);
+		if (err)
+			return err;
+
+		reg &= ~PORT_STATUS_CMODE_MASK;
+		reg |= cmode;
+
+		err = mv88e6xxx_port_write(chip, port, PORT_STATUS, reg);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+int mv88e6xxx_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode)
+{
+	int err;
+	u16 reg;
+
+	err = mv88e6xxx_port_read(chip, port, PORT_STATUS, &reg);
+	if (err)
+		return err;
+
+	*cmode = reg & PORT_STATUS_CMODE_MASK;
+
+	return 0;
+}
+
 /* Offset 0x02: Pause Control
  *
  * Do not limit the period of time that this port can be paused for by

drivers/net/dsa/mv88e6xxx/port.h

@@ -67,5 +67,8 @@ int mv88e6095_port_egress_rate_limiting(struct mv88e6xxx_chip *chip, int port);
 int mv88e6097_port_egress_rate_limiting(struct mv88e6xxx_chip *chip, int port);
 int mv88e6097_port_pause_config(struct mv88e6xxx_chip *chip, int port);
 int mv88e6390_port_pause_config(struct mv88e6xxx_chip *chip, int port);
+int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
+			      phy_interface_t mode);
+int mv88e6xxx_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
 
 #endif /* _MV88E6XXX_PORT_H */

include/linux/phy.h

@@ -81,6 +81,9 @@ typedef enum {
 	PHY_INTERFACE_MODE_MOCA,
 	PHY_INTERFACE_MODE_QSGMII,
 	PHY_INTERFACE_MODE_TRGMII,
+	PHY_INTERFACE_MODE_1000BASEX,
+	PHY_INTERFACE_MODE_2500BASEX,
+	PHY_INTERFACE_MODE_RXAUI,
 	PHY_INTERFACE_MODE_MAX,
 } phy_interface_t;
 
@@ -141,6 +144,12 @@ static inline const char *phy_modes(phy_interface_t interface)
 		return "qsgmii";
 	case PHY_INTERFACE_MODE_TRGMII:
 		return "trgmii";
+	case PHY_INTERFACE_MODE_1000BASEX:
+		return "1000base-x";
+	case PHY_INTERFACE_MODE_2500BASEX:
+		return "2500base-x";
+	case PHY_INTERFACE_MODE_RXAUI:
+		return "rxaui";
 	default:
 		return "unknown";
 	}