Merge tag 'iio-fixes-for-3.15b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of fixes for IIO in the 3.15 cycle.

* ad2s1200 - Fix some missing parenthesis in a for statement that could have
  led to an error being missed when getting gpios.
* Fix a null derefference issue in the mpu6050 when platform data is not
  provided (or is provided via the device tree for example).
* exynos_adc bug on remove due to child devices having been added to the
  parent of the IIO device rather than the IIO device itself.  This caused an
  issue with the IIO device removing itself in it's remove function.
* Make all ADC drivers buildable as modules to avoid dependency issues if
  the IIO core is itself built as a module.  The exynos adc bug became
  apparently whilst this fix was being tested.

drivers/iio/adc/Kconfig

@@ -106,7 +106,7 @@ config AT91_ADC
 	  Say yes here to build support for Atmel AT91 ADC.
 
 config EXYNOS_ADC
-	bool "Exynos ADC driver support"
+	tristate "Exynos ADC driver support"
 	depends on OF
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series
@@ -114,7 +114,7 @@ config EXYNOS_ADC
 	  this resource.
 
 config LP8788_ADC
-	bool "LP8788 ADC driver"
+	tristate "LP8788 ADC driver"
 	depends on MFD_LP8788
 	help
 	  Say yes here to build support for TI LP8788 ADC.

drivers/iio/adc/exynos_adc.c

@@ -344,7 +344,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
 
 	exynos_adc_hw_init(info);
 
-	ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev);
+	ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed adding child nodes\n");
 		goto err_of_populate;
@@ -353,7 +353,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	return 0;
 
 err_of_populate:
-	device_for_each_child(&pdev->dev, NULL,
+	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
 	regulator_disable(info->vdd);
 	clk_disable_unprepare(info->clk);
@@ -369,7 +369,7 @@ static int exynos_adc_remove(struct platform_device *pdev)
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct exynos_adc *info = iio_priv(indio_dev);
 
-	device_for_each_child(&pdev->dev, NULL,
+	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
 	regulator_disable(info->vdd);
 	clk_disable_unprepare(info->clk);

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -660,6 +660,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 {
 	struct inv_mpu6050_state *st;
 	struct iio_dev *indio_dev;
+	struct inv_mpu6050_platform_data *pdata;
 	int result;
 
 	if (!i2c_check_functionality(client->adapter,
@@ -672,8 +673,10 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 	st->client = client;
-	st->plat_data = *(struct inv_mpu6050_platform_data
-				*)dev_get_platdata(&client->dev);
+	pdata = (struct inv_mpu6050_platform_data
+			*)dev_get_platdata(&client->dev);
+	if (pdata)
+		st->plat_data = *pdata;
 	/* power is turned on inside check chip type*/
 	result = inv_check_and_setup_chip(st, id);
 	if (result)

drivers/staging/iio/resolver/ad2s1200.c

@@ -107,7 +107,7 @@ static int ad2s1200_probe(struct spi_device *spi)
 	int pn, ret = 0;
 	unsigned short *pins = spi->dev.platform_data;
 
-	for (pn = 0; pn < AD2S1200_PN; pn++)
+	for (pn = 0; pn < AD2S1200_PN; pn++) {
 		ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT,
 					    DRV_NAME);
 		if (ret) {
@@ -115,6 +115,7 @@ static int ad2s1200_probe(struct spi_device *spi)
 							pins[pn]);
 			return ret;
 		}
+	}
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;