drm/exynos/decon5433: fix timing registers writes

All timing registers should contain values decreased by one.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drivers/gpu/drm/exynos/exynos5433_drm_decon.c

@@ -104,7 +104,7 @@ static void decon_setup_trigger(struct decon_context *ctx)
 static void decon_commit(struct exynos_drm_crtc *crtc)
 {
 	struct decon_context *ctx = crtc->ctx;
-	struct drm_display_mode *mode = &crtc->base.mode;
+	struct drm_display_mode *m = &crtc->base.mode;
 	u32 val;
 
 	if (ctx->suspended)
@@ -122,29 +122,29 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
 		val |= VIDOUT_RGB_IF;
 	writel(val, ctx->addr + DECON_VIDOUTCON0);
 
-	val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
-		VIDTCON2_HOZVAL(mode->hdisplay - 1);
+	val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
+		VIDTCON2_HOZVAL(m->hdisplay - 1);
 	writel(val, ctx->addr + DECON_VIDTCON2);
 
 	if (!ctx->i80_if) {
 		val = VIDTCON00_VBPD_F(
-				mode->crtc_vtotal - mode->crtc_vsync_end) |
+				m->crtc_vtotal - m->crtc_vsync_end - 1) |
 			VIDTCON00_VFPD_F(
-				mode->crtc_vsync_start - mode->crtc_vdisplay);
+				m->crtc_vsync_start - m->crtc_vdisplay - 1);
 		writel(val, ctx->addr + DECON_VIDTCON00);
 
 		val = VIDTCON01_VSPW_F(
-				mode->crtc_vsync_end - mode->crtc_vsync_start);
+				m->crtc_vsync_end - m->crtc_vsync_start - 1);
 		writel(val, ctx->addr + DECON_VIDTCON01);
 
 		val = VIDTCON10_HBPD_F(
-				mode->crtc_htotal - mode->crtc_hsync_end) |
+				m->crtc_htotal - m->crtc_hsync_end - 1) |
 			VIDTCON10_HFPD_F(
-				mode->crtc_hsync_start - mode->crtc_hdisplay);
+				m->crtc_hsync_start - m->crtc_hdisplay - 1);
 		writel(val, ctx->addr + DECON_VIDTCON10);
 
 		val = VIDTCON11_HSPW_F(
-				mode->crtc_hsync_end - mode->crtc_hsync_start);
+				m->crtc_hsync_end - m->crtc_hsync_start - 1);
 		writel(val, ctx->addr + DECON_VIDTCON11);
 	}