hwmon: (lm80) Convert fan display function macros into functions

Convert fan display function macros into functions to reduce
code size and improve code readability.

Code size reduction is about 200 bytes on x86_64.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/lm80.c

@@ -116,6 +116,12 @@ enum in_index {
 	i_num_in
 };
 
+enum fan_index {
+	f_input,
+	f_min,
+	f_num_fan
+};
+
 /*
  * Client data (each client gets its own)
  */
@@ -128,8 +134,7 @@ struct lm80_data {
 	unsigned long last_updated;	/* In jiffies */
 
 	u8 in[i_num_in][7];	/* Register value, 1st index is enum in_index */
-	u8 fan[2];		/* Register value */
-	u8 fan_min[2];		/* Register value */
+	u8 fan[f_num_fan][2];	/* Register value, 1st index enum fan_index */
 	u8 fan_div[2];		/* Register encoding, shifted right */
 	s16 temp[t_num_temp];	/* Register values, normalized to 16 bit */
 	u16 alarms;		/* Register encoding, combined */
@@ -207,19 +212,17 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-#define show_fan(suffix, value) \
-static ssize_t show_fan_##suffix(struct device *dev, \
-	struct device_attribute *attr, char *buf) \
-{ \
-	int nr = to_sensor_dev_attr(attr)->index; \
-	struct lm80_data *data = lm80_update_device(dev); \
-	if (IS_ERR(data)) \
-		return PTR_ERR(data); \
-	return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[nr], \
-		       DIV_FROM_REG(data->fan_div[nr]))); \
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	int index = to_sensor_dev_attr_2(attr)->index;
+	int nr = to_sensor_dev_attr_2(attr)->nr;
+	struct lm80_data *data = lm80_update_device(dev);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr][index],
+		       DIV_FROM_REG(data->fan_div[index])));
 }
-show_fan(min, fan_min)
-show_fan(input, fan)
 
 static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
 	char *buf)
@@ -234,7 +237,8 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 	const char *buf, size_t count)
 {
-	int nr = to_sensor_dev_attr(attr)->index;
+	int index = to_sensor_dev_attr_2(attr)->index;
+	int nr = to_sensor_dev_attr_2(attr)->nr;
 	struct lm80_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	unsigned long val;
@@ -243,8 +247,10 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 		return err;
 
 	mutex_lock(&data->update_lock);
-	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
-	lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]);
+	data->fan[nr][index] = FAN_TO_REG(val,
+					  DIV_FROM_REG(data->fan_div[index]));
+	lm80_write_value(client, LM80_REG_FAN_MIN(index + 1),
+			 data->fan[nr][index]);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -269,7 +275,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 
 	/* Save fan_min */
 	mutex_lock(&data->update_lock);
-	min = FAN_FROM_REG(data->fan_min[nr],
+	min = FAN_FROM_REG(data->fan[f_min][nr],
 			   DIV_FROM_REG(data->fan_div[nr]));
 
 	switch (val) {
@@ -293,13 +299,14 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1))))
-	    | (data->fan_div[nr] << (2 * (nr + 1)));
+	reg = (lm80_read_value(client, LM80_REG_FANDIV) &
+	       ~(3 << (2 * (nr + 1)))) | (data->fan_div[nr] << (2 * (nr + 1)));
 	lm80_write_value(client, LM80_REG_FANDIV, reg);
 
 	/* Restore fan_min */
-	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
-	lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]);
+	data->fan[f_min][nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1),
+			 data->fan[f_min][nr]);
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -388,12 +395,12 @@ static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, i_input, 3);
 static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, i_input, 4);
 static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, i_input, 5);
 static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, i_input, 6);
-static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
-		show_fan_min, set_fan_min, 0);
-static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
-		show_fan_min, set_fan_min, 1);
-static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IWUSR | S_IRUGO,
+		show_fan, set_fan_min, f_min, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IWUSR | S_IRUGO,
+		show_fan, set_fan_min, f_min, 1);
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, f_input, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, f_input, 1);
 static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO,
 		show_fan_div, set_fan_div, 0);
 static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO,
@@ -537,8 +544,8 @@ static int lm80_probe(struct i2c_client *client,
 	lm80_init_client(client);
 
 	/* A few vars need to be filled upon startup */
-	data->fan_min[0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
-	data->fan_min[1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
+	data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+	data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, lm80_groups);
@@ -608,22 +615,22 @@ static struct lm80_data *lm80_update_device(struct device *dev)
 		rv = lm80_read_value(client, LM80_REG_FAN1);
 		if (rv < 0)
 			goto abort;
-		data->fan[0] = rv;
+		data->fan[f_input][0] = rv;
 
 		rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
 		if (rv < 0)
 			goto abort;
-		data->fan_min[0] = rv;
+		data->fan[f_min][0] = rv;
 
 		rv = lm80_read_value(client, LM80_REG_FAN2);
 		if (rv < 0)
 			goto abort;
-		data->fan[1] = rv;
+		data->fan[f_input][1] = rv;
 
 		rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
 		if (rv < 0)
 			goto abort;
-		data->fan_min[1] = rv;
+		data->fan[f_min][1] = rv;
 
 		prev_rv = rv = lm80_read_value(client, LM80_REG_TEMP);
 		if (rv < 0)